* gdbthread.h (struct thread_info): New `pending_follow' field.
* thread.c (new_thread): New function.
(add_thread_silent): Use it.
* breakpoint.c (internal_breakpoint_number): New global, moved
from inside...
(create_internal_breakpoint): ... this.
(clone_momentary_breakpoint): New.
* breakpoint.h (clone_momentary_breakpoint): Declare.
* infrun.c (nullify_last_target_wait_ptid): Move declaration
higher.
(pending_follow): Delete.
(follow_fork): Handle pending follow fork event here. Moved the
preserving of thread stepping state here.
(resume): Don't handle pending follow fork events here. Only
install the inferior's terminal modes if we're about to resume it.
(proceed): Handle possible pending follow fork events here.
(init_wait_for_inferior): No need to clear pending_follow anymore,
it's gone.
(handle_inferior_event): Adjust to per-thread `pending_follow'.
Call `follow_fork' to handle following the fork. If the
follow-fork is cancelled, stop stepping.
* linux-nat.c (linux_child_follow_fork): Adjust to per-thread
`pending_follow' events. Remove code that handled preserving the
thread stepping state.
* inf-ptrace.c (inf_ptrace_follow_fork): Ditto.
* inf-ttrace.c (inf_ttrace_follow_fork): Ditto.
gdb/testsuite/
* gdb.threads/fork-thread-pending.c: New.
* gdb.threads/fork-thread-pending.exp: New.
2009-05-18 Jon Beniston <jon@beniston.com>
* MAINTAINERS: Add lm32 target.
* Makefile.in: Add lm32 dependencies.
* NEWS: Indicate lm32 is a new target.
* configure.tgt: Add lm32 targets.
* lm32-tdep.c: New file.
gdb/testsuite
2009-05-18 Jon Beniston <jon@beniston.com>
* gdb.asm/asm-source.exp: Add lm32 target.
include/gdb/
2009-05-18 Jon Beniston <jon@beniston.com>
* sim-lm32.h: New file.
sim/
2009-05-18 Jon Beniston <jon@beniston.com>
* MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
* configure.ac: Add lm32 target.
* lm32: New directory.
sim/common
2009-05-18 Jon Beniston <jon@beniston.com>
* gennltvals.sh: Add lm32 target.
* nltvals.def: Add lm32 syscall definitions.
sim/lm32/
2009-05-18 Jon Beniston <jon@beniston.com>
* Makefile.in: New file.
* arch.c: New file.
* arch.h: New file.
* config.in: New file.
* configure: New file.
* configure.ac: New file.
* cpu.c: New file.
* cpu.h: New file.
* cpuall.h: New file.
* decode.c: New file.
* decode.h: New file.
* dv-lm32cpu.c: New file.
* dv-lm32timer.c: New file.
* dv-lm32uart.c: New file.
* lm32.c: New file.
* lm32-sim.h: New file.
* mloop.in: New file.
* model.c: New file.
* sem.c: New file.
* sem-switch.c: New file.
* sim-if.c: New file.
* sim-main.c: New file.
* tconfig.in: New file.
* traps.c: New file.
* user.c: New file.
2009-05-17 Pedro Alves <pedro@codesourcery.com>
* infrun.c (handle_inferior_event): When handling a
TARGET_WAITKIND_FORKED, detach breakpoints from the fork child
immediatelly.
* linux-nat.c (linux_child_follow_fork): Only detach breakpoint
from the child if vforking.
* inf-ptrace.c (inf_ptrace_follow_fork): No need to detach
breakpoints from the child here.
gdb/testsuite/
2009-05-17 Pedro Alves <pedro@codesourcery.com>
* gdb.base/foll-fork.c: Include stdlib.h. Add markers for
`gdb_get_line_number'. Call `callee' in both parent and child.
* gdb.base/foll-fork.exp (catch_fork_child_follow): Use
`gdb_get_line_number' instead of hardcoding line numbers.
(catch_fork_unpatch_child): New procedure to test detaching
breakpoints from child fork.
(tcatch_fork_parent_follow): Use `gdb_get_line_number' instead of
hardcoding line numbers.
(do_fork_tests): Run `catch_fork_unpatch_child'.
Fix internal error on breaking at a multi-locations caller source line.
* breakpoint.c (parse_breakpoint_sals): Set EXPLICIT_PC for the `break'
command with no parameters.
gdb/testsuite/
* gdb.cp/expand-sals.exp, gdb.cp/expand-sals.cc: New.
* macrocmd.c (info_macro_command): Print -Dname=value if LINE is zero.
gdb/doc/
* gdb.texinfo (Macros): Note command-line for `info macro'. Append
a new part on command-line defined macros.
gdb/testsuite/
* gdb.base/macscp.exp: New `options' parameter `-DFROM_COMMANDLINE'.
(info_macro): Remova `decimal' declaration. New variable `nonzero'.
Replace all uses of `decimal' by `nonzero'.
(info macro FROM_COMMANDLINE): New test.
* python/python-frame.c (frapy_richcompare): Return
Py_NotImplemented, not an error. Handle Py_NE as well.
gdb/testsuite
* gdb.python/python-frame.exp (gdb_py_test_silent_cmd): Test !=
operator on Frame.
* gdb.mi/basics.c (do_nothing): New.
(main): Use do_nothing instead of printf, so that
not to introduce race condition between output of
inferiour and output of gdb. Do not use sleep as it
is not generally available on embedded targets.
* dwarf2read.c
(new_symbol <DW_TAG_variable> <!DW_AT_location> <DW_AT_external>):
Create the symbol in local scope.
* symtab.h (cu->list_in_scope <LOC_UNRESOLVED>): New comment part.
gdb/testsuite/
* gdb.dwarf2/dw2-unresolved-main.c, gdb.dwarf2/dw2-unresolved.S,
gdb.dwarf2/dw2-unresolved.exp: New.
mi_run_to_main. Skip thread exit test on remote targets.
* gdb.mi/mi-nsintrall.exp: Don't check isnative. Use
mi_run_to_main.
* gdb.mi/mi-nsmoribund.exp: Don't check isnative. Use
mi_run_to_main.
* lib/mi-support.exp (mi_gdb_target_cmd): Remove trailing anchor
when expecting ^connected. Detect when the target doesn't support
non-stop mode.
(mi_run_cmd): Detect if non-stop mode was requested by isn't
supported. Return -1 on error, 0 on success.
(mi_runto_helper): Don't expect a stop if mi_run_cmd failed.
(mi_runto): Return mi_runto_helper's result explicitly.
* linux-low.c (linux_wait_for_event): Don't clear the `stepping'
flag.
(wait_for_sigstop): Don't leave a finished single-step SIGTRAP
pending.
(linux_continue_one_thread): Only preserve the stepping flag if
there's a pending breakpoint.
gdb/testsuite/
* gdb.threads/pending-step.c, gdb.threads/pending-step.exp: New.
* gdb.base/call-ar-st.exp: Set print frame-arguments to "all".
* gdb.ada/ref_param.exp: Set print frame-arguments to "all".
* gdb.ada/lang_switch.exp: Set print frame-arguments to "all".
Change gdb.Value.address from a method to an attribute.
* python/python-value.c (value_object): Add `address' element.
(valpy_dealloc): Decrement reference to self->address if set.
(valpy_new): Initialize val_obj->address.
(valpy_address): Rename to ...
(valpy_get_address): ... this. Change signature from method to
attribute. Update self->address if not set.
(value_to_value_object): Initialize val_obj->address.
(value_object_getset): Add `address' element.
(value_object_methods): Remove `address' element.
gdb/testsuite/
* gdb.python/python-value.exp: Add tests for the address
attribute.
gdb/doc/
* gdb.texinfo (Values From Inferior): Change gdb.Value.address
from a method to an attribute.
2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
Jim Blandy <jimb@red-bean.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
Tom Tromey <tromey@redhat.com>
Miscellaneous fixes to the Python code.
* python/python-cmd.c (cmdpy_init): Accept keyword
arguments.
* python/python-value.c (valpy_string): Accept keyword
arguments.
(valpy_binop): Use `break' to exit from the TRY_CATCH block.
Do not call value_to_value_object on NULL RES_VAL.
(value_object_methods): Change `string' entry to also accept
keyword arguments.
(convert_value_from_python): Return a copy of the value if obj is
a gdb.Value object.
(value_object_methods): Mark the `string' method as accepting
keywords, and show method "prototype" in the doc string.
* python/python.c (get_parameter): Don't return inside a
TRY_CATCH.
gdb/doc/
2009-03-21 Thiago Jung Bauermann <bauerman@br.ibm.com>
* gdb.texinfo (Values From Inferior): Fix optional arguments
markup.
(Commands In Python): Adjust argument names of gdb.Command.__init__
to what the function accepts as keywords.
gdb/testsuite/
2009-03-21 Thiago Jung Bauermann <bauerman@br.ibm.com>
* gdb.python/python-cmd.exp: Add tests for keyword arguments.
* gdb.python/python-function.exp: Add test for function returning
a GDB value.
(init): Delete.
(func): Delete definition and provide extern declaration.
(t): New.
(main): Don't call printf. Call func and store its result in t.
* return-nodebug1.c: New.
* return-nodebug.exp: Don't expect stdio output. Instead, print
the global variable t. Drop printf formatters and cast types from
foreach loop. Don't use prepare_for_testing. Compile
return-nodebug.c and return-nodebug1.c in separate steps. Don't
define FORMAT or CAST.
* stack.c (return_command <retval_exp>): New variables retval_expr
and old_chain. Inline parse_and_eval to initialize retval_expr. Check
RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
if RETURN_TYPE is NULL.
gdb/doc/
* gdb.texinfo (Returning): New description for missing debug info.
gdb/testsuite/
* gdb.base/return-nodebug.exp, gdb.base/return-nodebug.c: New.
* gdb.base/multi-forks.exp (continue_to_exit_bp_loc): New function with
code from `follow parent, print pids'.
(`follow child, print pids', `follow parent, print pids'): Call it.
Replace `gdb_test "break..."' by gdb_breakpoint.
