Most of the emultempl/*.em error/warning messages do not currently
appear in ld.pot, and fixing that is not simply a matter of adding
missing files to POTFILES. The difficulty is the shell-script
quoting, for example aarch64elf.em:PARSE_AND_LIST_OPTIONS "Don'\''t".
I suppose you could avoid contractions like "don't" but I'm unsure as
to whether gettext could handle everything in the emulparams scripts.
The right thing to do is feed the generated C files to gettext, as
this patch does. The patch just copies what is already done in bfd/
for generated files.
* Makefile.am (EMULATION_FILES, POTFILES): Delete.
(SRC_POTFILES, BLD_POTFILES): Define.
(po/POTFILES.in): Delete rule.
(po/SRC-POTFILES.in, po/BLD-POTFILES.in): New rules.
* configure.ac: Add AC_CONFIG_COMMANDS to create po/Makefile.
* po/Make-in (DISTFILES): Remove POTFILES.in, add SRC-POTFILES.in
and BLD-POTFILES.in.
(POTFILES): Delete.
(SRC-POTFILES, BLD-POTFILES): Define place marker.
(ld.pot): Build from SRC-POTFILES plus BLD-POTFILES.
(distclean, maintainer-clean): Tidy up new files.
(POTFILES, POTFILES.in): Delete rules.
(SRC-POTFILES, BLD-POTFILES, SRC-POTFILES.in, BLD-POTFILES.in):
New rules.
(Makefile): Depend on SRC-POTFILES and BLD-POTFILES.
* po/SRC-POTFILES.in: Rename from po/POTFILES.in.
* po/BLD-POTFILES.in: New file.
* Makefile.in: Regenerate.
* configure: Regenerate.
There were two copies of earmelf_fuchsia.c dependencies.
* Makefile.am (earmelfb_fuchsia.c): Rename rule from earmelf_fuchsia.c.
* Makefile.in: Regenerate.
To support IBT in Intel Control-flow Enforcement Technology (CET)
instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
#define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002
#define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0)
are added to GNU program properties to indicate that all executable
sections are compatible with IBT when ENDBR instruction starts each
valid target where an indirect branch instruction can land.
GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on
all relocatable inputs.
The followings changes are made to the Procedure Linkage Table (PLT):
1. For 64-bit x86-64, PLT is changed to
PLT0: push GOT[1]
bnd jmp *GOT[2]
nop
...
PLTn: endbr64
push namen_reloc_index
bnd jmp PLT0
together with the second PLT section:
PLTn: endbr64
bnd jmp *GOT[namen_index]
nop
BND prefix is also added so that IBT-enabled PLT is compatible with MPX.
2. For 32-bit x86-64 (x32) and i386, PLT is changed to
PLT0: push GOT[1]
jmp *GOT[2]
nop
...
PLTn: endbr64 # endbr32 for i386.
push namen_reloc_index
jmp PLT0
together with the second PLT section:
PLTn: endbr64 # endbr32 for i386.
jmp *GOT[namen_index]
nop
BND prefix isn't used since MPX isn't supported on x32 and BND registers
aren't used in parameter passing on i386.
GOT is an array of addresses. Initially, GOT[namen_index] is filled
with the address of the ENDBR instruction of the corresponding entry
in the first PLT section. The function, namen, is called via the
ENDBR instruction in the second PLT entry. GOT[namen_index] is updated
to the actual address of the function, namen, at run-time.
2 linker command line options are added:
1. -z ibtplt: Generate IBT-enabled PLT.
2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program
properties as well as IBT-enabled PLT.
bfd/
* elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New.
(elf_i386_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_lazy_ibt_plt0_entry): Likewise.
(elf_i386_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_eh_frame_lazy_ibt_plt): Likewise.
(elf_i386_lazy_plt_layout): Likewise.
(elf_i386_non_lazy_plt_layout): Likewise.
(elf_i386_link_hash_entry): Add plt_second.
(elf_i386_link_hash_table): Add plt_second and
plt_second_eh_frame.
(elf_i386_allocate_dynrelocs): Use the second PLT if needed.
(elf_i386_size_dynamic_sections): Use .plt.got unwind info for
the second PLT. Check the second PLT.
(elf_i386_relocate_section): Use the second PLT to resolve
PLT reference if needed.
(elf_i386_finish_dynamic_symbol): Fill and use the second PLT if
needed.
(elf_i386_finish_dynamic_sections): Set sh_entsize on the
second PLT. Generate unwind info for the second PLT.
(elf_i386_plt_type): Add plt_second.
(elf_i386_get_synthetic_symtab): Support the second PLT.
(elf_i386_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_i386_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_i386_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
* elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New.
(elf_x32_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_non_lazy_ibt_plt_entry): Likewise.
(elf_x32_non_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_eh_frame_lazy_ibt_plt): Likewise.
(elf_x32_eh_frame_lazy_ibt_plt): Likewise.
(elf_x86_64_lazy_ibt_plt): Likewise.
(elf_x32_lazy_ibt_plt): Likewise.
(elf_x86_64_non_lazy_ibt_plt): Likewise.
(elf_x32_non_lazy_ibt_plt): Likewise.
(elf_x86_64_get_synthetic_symtab): Support the second PLT.
(elf_x86_64_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_x86_64_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_x86_64_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
binutils/
* readelf.c (decode_x86_feature): New.
(print_gnu_property_note): Call decode_x86_feature on
GNU_PROPERTY_X86_FEATURE_1_AND.
* testsuite/binutils-all/i386/empty.d: New file.
* testsuite/binutils-all/i386/empty.s: Likewise.
* testsuite/binutils-all/i386/ibt.d: Likewise.
* testsuite/binutils-all/i386/ibt.s: Likewise.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/x86-64/empty.s: Likewise.
* testsuite/binutils-all/x86-64/ibt-x32.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.s: Likewise.
include/
* bfdlink.h (bfd_link_info): Add ibtplt and ibt.
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New.
(GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise.
ld/
* Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh.
* Makefile.in: Regenerated.
* NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt
and -z ibt.
* emulparams/cet.sh: New file.
* testsuite/ld-i386/ibt-plt-1.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.s: Likewise.
* testsuite/ld-i386/ibt-plt-2.s: Likewise.
* testsuite/ld-i386/ibt-plt-2a.d: Likewise.
* testsuite/ld-i386/ibt-plt-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3.s: Likewise.
* testsuite/ld-i386/ibt-plt-3a.d: Likewise.
* testsuite/ld-i386/ibt-plt-3b.d: Likewise.
* testsuite/ld-i386/ibt-plt-3c.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/plt-main-ibt.dd: Likewise.
* testsuite/ld-i386/plt-pie-ibt.dd: Likewise.
* testsuite/ld-i386/property-x86-empty.s: Likewise.
* testsuite/ld-i386/property-x86-ibt.s: Likewise.
* testsuite/ld-i386/property-x86-ibt1a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt1b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt2.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt4.d: Likewise.
* testsuite/ld-i386/property-x86-ibt5.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
* testsuite/ld-x86-64/property-x86-empty.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5.d: Likewise.
* emulparams/elf32_x86_64.sh: Source emulparams/cet.sh.
(TINY_READONLY_SECTION): Add .plt.sec.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_x86_64.sh: Source emulparams/cet.sh.
* ld.texinfo: Document -z ibtplt and -z ibt.
* testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
-z nodynamic-undefined-weak is only implemented for x86. (The sparc
backend has some support code but doesn't enable the option by
including ld/emulparams/dynamic_undefined_weak.sh, and since the
support looks like it may be broken I haven't enabled it.) This patch
adds the complementary -z dynamic-undefined-weak, extends both options
to affect building of shared libraries as well as executables, and
adds support for the option on powerpc.
include/
* bfdlink.h (struct bfd_link_info <dynamic_undefined_weak>):
Revise comment.
bfd/
* elflink.c (_bfd_elf_adjust_dynamic_symbol): Hide undefweak
or make dynamic for info->dynamic_undefined_weak 0 and 1.
* elf32-ppc.c:Formatting.
(ensure_undefweak_dynamic): Don't make dynamic when
info->dynamic_undefined_weak is zero.
(allocate_dynrelocs): Discard undefweak dyn_relocs for
info->dynamic_undefined_weak. Discard undef dyn_relocs when
not default visibility. Discard undef and undefweak
dyn_relocs earlier.
(ppc_elf_relocate_section): Adjust to suit.
* elf64-ppc.c: Formatting.
(ensure_undefweak_dynamic): Don't make dynamic when
info->dynamic_undefined_weak is zero.
(allocate_dynrelocs): Discard undefweak dyn_relocs for
info->dynamic_undefined_weak. Discard them earlier.
ld/
* ld.texinfo (dynamic-undefined-weak): Document.
(nodynamic-undefined-weak): Document that this option now can
be used with shared libs.
* emulparams/dynamic_undefined_weak.sh: Support -z
dynamic-undefined-weak.
* emulparams/elf32ppccommon.sh: Include dynamic_undefined_weak.sh.
* testsuite/ld-undefined/weak-undef.exp (undef_weak_so),
(undef_weak_exe): New. Use them. Add -z dynamic-undefined-weak
and -z nodynamic-undefined-weak tests.
* Makefile.am: Update powerpc dependencies.
* Makefile.in: Regenerate.
The arc700 nps variant uses some specific named sections to
facilitate its CMEM based instructions, which operate on memory
regions fixed at specific addresses.
This commit adds the arclinux_nps emulation, which is based on the
arclinux emulation. The new emulation uses the OTHER_SECTIONS
variable in the emulation parameters script to provide symbols
mapping to various locations in the CMEM space on nps.
The accompanying test ensures that all symbols are provided at the
correct address in the linker script.
ld/ChangeLog:
* Makefile.am: Add earclinux_nps.c target and add to
ALL_EMULATION_SOURCES.
* Makefile.in: Likewise, regenerated.
* configure.tgt: Add arclinux_nps as an extra emulation for
arc*-*-elf* and arc*-*-linux*.
* emulparams/arc-nps.sh: New file.
* emulparams/arclinux_nps.sh: New file.
* testsuite/ld-arc/arclinux-nps.d,
* testsuite/ld-arc/arclinux-nps.s: New test.
I noticed that PRU LD is broken when BFD is configured
with --enable-targets=all. This patch fixes it, and takes the
opportunity to clean the epruelf.c dependencies.
* Makefile.am (ALL_EMULATION_SOURCES): Add epruelf.c.
(epruelf.c): Remove unneeded dependencies.
* Makefile.in: Regenerate
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
Many of the ld tests are not run for cross builds, in some cases
because the test needs to run a newly linked executable, and in others
simply because it was easier to write the test for native only. Even
when a test needs to run, it's good to compile and link to exercise
the linker. So that's what this patch does. I've also rid us of
the old ld_link procedure with all the HOSTING_CRT0 etc. setup. It's
much simpler to just link with $CC.
This does mean that a cross build with cross-compiler installed but
no cross C-library will give lots of failures. If that turns out to
be too annoying, I guess we can write a tcl procedure to detect it and
not run all the extra tests.
* Makefile.am (bootstrap): Delete rule.
(ld-partial, ld1, ld1-full, ld2, ld3): Likewise.
(HOSTING_CRT0, HOSTING_SCRT0): Don't define.
(HOSTING_LIBS, HOSTING_SLIBS, HOSTING_EMU): Likewise.
* configure.ac (HOSTING_CRT0, HOSTING_SCRT0): Don't define.
(HOSTING_LIBS, HOSTING_SLIBS): Likewise.
* configure.host (HOSTING_CRT0, HOSTING_LIBS): Don't define.
* Makefile.in: Regenerate.
* configure: Regenerate.
* testsuite/config/default.exp (get_link_files): Delete.
(HOSTING_CRT0, HOSTING_SCRT0, HOSTING_LIBS, HOSTING_SLIBS): Don't
define.
(ld_simple_link): Delete.
* testsuite/lib/ld-lib.exp (default_ld_link): Delete
(default_ld_simple_link): Rename to default_ld_link.
(ld_simple_link_defsyms): Rename to ld_link_defsyms.
(run_ld_link_tests): Use ld_link, not ld_simple_link.
(run_cc_link_tests): Likewise.
(run_ld_link_exec_tests): Use $CC or $CXX to link, not $ld.
Don't run exe when not native, and return unsupported.
* testsuite/ld-bootstrap/bootstrap.exp: Create gccld1 etc. dirs.
Link ld1 etc. using $CC.
* testsuite/ld-cdtest/cdtest.exp: Link cdtest using $CC.
* testsuite/ld-checks/checks.exp: Use ld_link, not ld_simple_link.
* testsuite/ld-cygwin/exe-export.exp: Likewise.
* testsuite/ld-elf/binutils.exp: Likewise.
* testsuite/ld-elf/eh-group.exp: Likewise.
* testsuite/ld-elf/exclude.exp: Likewise.
* testsuite/ld-elf/frame.exp: Likewise.
* testsuite/ld-elf/sec-to-seg.exp: Likewise.
* testsuite/ld-elf/tls_common.exp: Likewise.
* testsuite/ld-elfcomm/elfcomm.exp: Likewise.
* testsuite/ld-fastcall/fastcall.exp: Likewise.
* testsuite/ld-gc/gc.exp: Likewise.
* testsuite/ld-ifunc/binutils.exp: Likewise.
* testsuite/ld-mep/mep.exp: Likewise.
* testsuite/ld-mips-elf/mips-elf-flags.exp: Likewise.
* testsuite/ld-mn10300/mn10300.exp: Likewise.
* testsuite/ld-nios2/nios2.exp: Likewise.
* testsuite/ld-pe/pe-compile.exp: Likewise.
* testsuite/ld-pe/pe-run.exp: Likewise.
* testsuite/ld-pe/pe-run2.exp: Likewise.
* testsuite/ld-plugin/plugin.exp: Likewise.
* testsuite/ld-scripts/align.exp: Likewise.
* testsuite/ld-scripts/alignof.exp: Likewise.
* testsuite/ld-scripts/assert.exp: Likewise.
* testsuite/ld-scripts/defined.exp: Likewise.
* testsuite/ld-scripts/extern.exp: Likewise.
* testsuite/ld-scripts/log2.exp: Likewise.
* testsuite/ld-scripts/map-address.exp: Likewise.
* testsuite/ld-scripts/phdrs.exp: Likewise.
* testsuite/ld-scripts/phdrs2.exp: Likewise.
* testsuite/ld-scripts/script.exp: Likewise.
* testsuite/ld-scripts/section-flags.exp: Likewise.
* testsuite/ld-scripts/sizeof.exp: Likewise.
* testsuite/ld-scripts/sysroot-prefix.exp: Likewise.
* testsuite/ld-scripts/weak.exp: Likewise.
* testsuite/ld-selective/selective.exp: Likewise.
* testsuite/ld-sh/sh.exp: Likewise.
* testsuite/ld-sh/sh64/relax.exp: Likewise.
* testsuite/ld-sh/sh64/relfail.exp: Likewise.
* testsuite/ld-srec/srec.exp: Likewise.
* testsuite/ld-tic6x/tic6x.exp: Likewise.
* testsuite/ld-undefined/weak-undef.exp: Likewise.
* testsuite/ld-versados/versados.exp: Likewise.
* testsuite/ld-x86-64/dwarfreloc.exp: Likewise.
* testsuite/ld-xtensa/coalesce.exp: Likewise.
* testsuite/ld-xtensa/diff_overflow.exp: Likewise.
* testsuite/ld-xtensa/lcall.exp: Likewise.
* testsuite/ld-elf/audit.exp: Run non-native too.
* testsuite/ld-elf/compress.exp: Likewise. Replace ld options with
gcc -Wl, options.
* testsuite/ld-elf/dwarf.exp: Run non-native too. Use ld_link,
not ld_simple_link. Add -Wl,--no-as-needed to some tests.
* testsuite/ld-elf/elf.exp: Run non-native too. Formatting.
* testsuite/ld-elf/indirect.exp: Run non-native too. Add
-Wl,--no-as-needed to most tests.
* testsuite/ld-elf/shared.exp: Run non-native too. Use braces
to simplify quoting. Set run_tests using [list] rather than
brace assignment to expand $extralibs. Add -Wl,--no-as-needed
to many test. Prefix ld options with -Wl,.
(mix_pic_and_non_pic): Don't run exe if not native.
* testsuite/ld-elf/wrap.exp: Run non-native too. Add
-Wl,--no-as-needed and prefix ld options with -Wl,.
* testsuite/ld-elfvers/vers.exp: Run non-native too. Use ld_link,
not ld_simple_link.
* testsuite/ld-elfvsb/elfvsb.exp: Likewise.
(visibility_test): Don't run exe if not native.
* testsuite/ld-elfweak/elfweak.exp: Run non-native too. Use ld_link,
not ld_simple_link.
(build_exec): Don't run exe if not native.
* testsuite/ld-ifunc/ifunc.exp: Run non-native too. Use ld_link,
not ld_simple_link. Link using $CC. Add -Wl,--no-as-needed
to some tests and prefix ld options with -Wl,. Expect GNU
for hppa-linux even when no ifuncs. Delete cleanup.
* testsuite/ld-pie/pie.exp: Run non-native too.
* testsuite/ld-plugin/lto.exp: Likewise.
* testsuite/ld-shared/shared.exp: Likewise. Use ld_link,
not ld_simple_link.
(shared_test): Don't run exe if not native.
* testsuite/ld-size/size.exp: Run non-native too. Add
-Wl,--no-as-needed to some tests. Prefix ld options with -Wl,.
* testsuite/ld-unique/unique.exp: Run non-native too. Use ld_link,
not ld_simple_link. Link using $CC. Add -Wl,--no-as-needed
to some tests and prefix ld options with -Wl,. Expect GNU
for hppa-linux even when no unique syms. Delete cleanup.
* testsuite/ld-x86-64/tls.exp: Add -Wl,--no-as-needed to some
tests and prefix ld options with -Wl,.
* testsuite/ld-x86-64/x86-64.exp: Use ld_link, not ld_simple_link.
Add -Wl,--no-as-needed to some tests. Prefix ld options with -Wl,.
* configure.ac: Add fuchsia to targets that use ELF.
* configure: Regenerated.
bfd * configure.tgt: Add support for fuchsia (OS).
gas * configure.tgt: Add support for fuchsia (OS).
ld * Makefile.am: Add dependency information for earmelf_fuchsia.c.
* Makefile.in: Regenerate.
* configure.tgt: Add support for aarch64-*-fuchsia, arm*-*-fuchsia*, and
x86_64-*-fuchsia* targets.
* emulparams/armelf_fuchsia.sh: New file.
* emulparams/armelfb_fuchsia.sh: New file.
* Makefile.am (CFLAGS_FOR_TARGET): Define as a copy of CFLAGS but
without any sanitization options.
(CXXFLAGS_FOR_TARGET): Define as a copy of CXXFLAGS but without
any sanitization options.
(check-DEJAGNU): Pass CFLAGS_FOR_TARGET and CXXFLAGS_FOR_TARGET
as CFLAGS and CXXFLAGS respectively.
The plugin is called to claim symbols in an archive element from
plugin_object_p. But those symbols aren't needed to create output.
They are defined and referenced only within IR. get_symbols should
return resolution based on IR symbol kinds.
PR ld/20070
* Makefile.am (noinst_LTLIBRARIES): Add libldtestplug4.la.
(libldtestplug4_la_SOURCES): New.
(libldtestplug4_la_CFLAGS): Likewise.
(libldtestplug4_la_LDFLAGS): Likewise.
* Makefile.in: Regenerated.
* plugin.c (get_symbols): Return resolution based on IR symbol
kinds for symbols defined/referenced only within IR.
* testplug4.c: New file.
* ld/testsuite/ld-plugin/pr20070.d: Likewise.
* ld/testsuite/ld-plugin/pr20070a.c: Likewise.
* ld/testsuite/ld-plugin/pr20070b.c: Likewise.
* testsuite/ld-plugin/plugin.exp (plugin4_name): New.
(plugin4_path): Likewise.
Add a test for ld/20070.
* Makefile.am (CXX_FOR_TARGET): Check for the presence of an
in-tree xg++ executable after checking for the presence of an
in-tree g++ executable.
* Makefile.in: Regenerate.
ld * Makefile.am (ALL_64_EMULATION_SOURCES): Add support for
CloudABI on aarch64. For this target we have to make sure we use
ELFOSABI_CLOUDABI instead of ELFOSABI_NONE.
* configure.tgt (targ_emul): Likewise.
* emulparams/aarch64cloudabi.sh: New file.
* emulparams/aarch64cloudabib.sh: New file.
* Makefile.in: Regenerate.
bfd * config.bfd (targ_defvec): Add support for CloudABI on aarch64.
For this target we have to make sure we use ELFOSABI_CLOUDABI
instead of ELFOSABI_NONE.
* configure.ac (tb): Likewise.
* elfnn-aarch64.c: Likewise.
* targets.c (_bfd_target_vector): Likewise.
* configure: Regenerate.
gas * config/tc-aarch64.c (elf64_aarch64_target_format): Select the
cloudabi format if the TARGET_OS is cloudabi.
gas * config/tc-msp430.c (MAX_OP_LEN): Increase to 4096.
(msp430_make_init_symbols): New function.
(msp430_section): Call it.
(msp430_frob_section): Likewise.
ld * emulparams/msp430elf.sh (TEMPLATE_NAME): Change to msp430.
* scripttempl/msp430.sc (.text): Add .lower.text and .either.text.
(.data): Add .lower.data and .either.data.
(.bss): Add .lower.bss and .either.bss.
(.rodata): Add .lower.rodata and .either.rodata.
* emultempl/msp430.em: New file. Implements a new orphan
placement algorithm that divides sections between lower and upper
memory regions.
* Makefile.am (emsp430elf.c): Depend upon msp430.em.
*emsp430X.c): Likewise.
* Makefine.in: Regenerate.
bfd * elf32-v850.c (v850_set_note): New function. Creates a Renesas
style note entry.
(v850_elf_make_note_section): New function. Creates a note
section.
(v850_elf_create_sections): New function. Create a note section
if one is not already present.
(v850_elf_set_note): New function. Adds a note to a bfd.
(v850_elf_copy_private_bfd_data): New function. Copies V850
notes.
(v850_elf_merge_notes): New function. Merges V850 notes.
(print_v850_note): New function. Displays a V850 note.
(v850_elf_print_notes): New function. Displays all notes attached
to a bfd.
(v850_elf_merge_private_bfd_data): Call v850_elf_merge_notes.
(v850_elf_print_private_bfd_data): Call v850_elf_print_notes.
(v850_elf_fake_sections): Set the type of the V850 note section.
* bfd-in.h (v850_elf_create_sections): Add prototype.
(v850_elf_set_note): Add prototype.
* bfd-in2.h: Regenerate.
binutils* readelf.c (get_machine_flags): Remove deprecated V850 machine
flags.
(get_v850_section_type_name): New function. Handles V850 special
sections.
(get_section_type_name): Add support for V850.
(get_v850_elf_note_type): New function. Returns the name of a
V850 note.
(print_v850_note): New function. Prints a V850 note.
(process_v850_notes): New function. Prints V850 notes.
(process_note_sections): Add support for V850.
binutils/testsute
* binutils-all/objcopy.exp: Skip the strip-10 test for the V850.
gas * config/tc-v850.c (soft_float): New variable.
(v850_data_8): New variable.
(md_show_usage): Add -msoft-float/-mhard-float.
(md_parse_option): Likewise.
(md_begin): Set the default value of soft_float.
(v850_md_end): New function. Creates a note section.
* config/tc-v850.h (md_end): Define.
* doc/c-v850.texi: Document -msoft-float/-mhard-float.
gas/testsuite
* gas/elf/elf.exp: Add special version of the section2 test for
the V850.
* gas/elf/section2.e-v850: New file.
include/elf
* v850.h (EF_RH850_SIMD): Delete deprecated flag.
(EF_RH850_CACHE): Likewise.
(EF_RH850_MMU): Likewise.
(EF_RH850_DATA_ALIGN8): Likewise.
(SHT_RENESAS_IOP): Fix typo in name.
(SHT_RENESAS_INFO): Define.
(V850_NOTE_SECNAME): Define.
(SIZEOF_V850_NOTE): Define.
(V850_NOTE_NAME): Define.
(enum v850_notes): New enum.
(NUM_V850_NOTES): Define.
ld/ChangeLog
2015-02-24 Nick Clifton <nickc@redhat.com>
* Makefile.am (ev850.c): Add dependency upon
$(srcdir)/emultempl/v850elf.em.
(ev850_rh850.c): Likewise.
* Makefile.in: Regenerate.
* emultempl/v850elf.em: New file.
* emulparams/v850.sh (EXTRA_EM_FILE): Define.
* emulparams/v850_rh850.sh (EXTRA_EM_FILE): Define.
* scripttempl/v850.sc: Add .note.renesas section.
* scripttempl/v850_rh850.sc: Likewise.
ld/testsuite
* ld-elf/extract-symbol-1sec.d: Expect to fail on the V850.
This removes usage of the obsolete AC_INIT and AM_INIT_AUTOMAKE in all
binutils configure.in files. The BFD version is now in bfd/version.m4
rather than bfd/configure.in, which allows automake to automatically
track this dependency.
bfd/
* version.m4: New file.
* configure.in: Include version.m4.
(AC_INIT): Update.
* Makefile.am (RELEASE): Delete.
(bfdver.h): Depend on development.sh, use instead of RELEASE.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
opcodes/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
binutils/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gas/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* configure.com: Get bfd version from bfd/version.m4.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gprof/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
ld/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* archures.c: add avrtiny architecture for avr target.
* bfd-in2.h: Regenerate.
* cpu-avr.c (arch_info_struct): add avrtiny arch info.
* elf32-avr.c (elf_avr_howto_table): new relocation R_AVR_LDS_STS_16
added for 16 bit LDS/STS instruction of avrtiny arch.
(avr_reloc_map): reloc R_AVR_LDS_STS_16 is mapped to
BFD_RELOC_AVR_LDS_STS_16.
(bfd_elf_avr_final_write_processing): select machine number avrtiny arch.
(elf32_avr_object_p): set machine number for avrtiny arch.
* libbfd.h: Regenerate.
* reloc.c: Add documentation for BFD_RELOC_AVR_LDS_STS_16 reloc.
* config/tc-avr.c (mcu_types): Add avrtiny arch.
Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
and attiny40.
(md_show_usage): Add avrtiny arch in usage message.
(avr_operand): validate and issue error for invalid register for avrtiny.
add new reloc exp for 16 bit lds/sts instruction.
(md_apply_fix): check 16 bit lds/sts operand for out of range and encode.
(md_assemble): check ISA for arch and issue diagnostic.
* include/elf/avr.h (E_AVR_MACH_AVRTINY): define avrtiny machine number.
(R_AVR_LDS_STS_16): define 16 bit lds/sts reloc number.
* include/opcode/avr.h (AVR_ISA_TINY): define avrtiny specific ISA.
(AVR_ISA_2xxxa): define ISA without LPM.
(AVR_ISA_AVRTINY): define avrtiny arch ISA.
Add doc for contraint used in 16 bit lds/sts.
Adjust ISA group for icall, ijmp, pop and push.
Add 16 bit lds/sts encoding and update 32 bit lds/sts constraints.
* opcodes/avr-dis.c (avr_operand): Handle constraint j for 16 bit lds/sts.
(print_insn_avr): do not select opcode if insn ISA is avrtiny and machine
is not avrtiny.
* Makefile.am (ALL_EMULATION_SOURCES): add avrtiny emulation source.
(eavrtiny.c): add rules for avrtiny emulation source.
* Makefile.in: Regenerate.
* configure.tgt: Add avrtiny to avr target emulations.
* scripttempl/avrtiny.sc: New file.
linker script template for avrtiny arch.
* emulparams/avrtiny.sh: New file.
emulation parameters for avrtiny arch.
* Makefile.am (ALL_EMULATION_SOURCES): Move ei386pep.c from
here...
(ALL_64_EMULATION_SOURCES): ... to here.
(ALL_EMUL_EXTRA_OFILES): Move pep-dll.o from here...
(ALL_64_EMUL_EXTRA_OFILES): New. ... to here.
* configure.in (EMUL_EXTRA_OFILES): Include
ALL_64_EMUL_EXTRA_OFILES when making a 64-bit enabled build.
* Makefile.in: Regenerate.
* configure: Regenerate.
and fix more nds32 dependencies.
* scripttempl/elf.sc: Edit out __rela_iplt symbol assignments from
.rel sections, and __rel_iplt from .rela sections.
* scripttempl/nds32elf.sc: Likewise.
* Makefile.am (ends32*.c): Depend on nds32elf.sc.
* Makefile.in: Regenerate.
The goal of this patch is to provide an easy way to make
--disable-werror the default when building binutils, or the parts
of binutils that need to get built when building GDB. In development
mode, we want to continue making -Werror the default with GCC.
But, when making releases, I think we want to make it as easy as
possible for regular users to successfully build from sources.
GDB already has this kind of feature to turn -Werror as well as
the use of the libmcheck library. As GDB Release Manager, I take
advantage of it to turn those off after having cut the branch.
I'd like to be able to do the same for the binutils bits. And
perhaps Tristan will want to do the same for his releases too
(not sure, binutils builders might be a little savvier than GDB
builders).
This patch introduces a new file, called development.sh, which
just sets a variable called $development. In our development branches
(Eg. "master"), it's set to true. But setting it to false would allow
us to change the default behavior of various development-related
features to be turned off; in this case, it turns off the use of
-Werror by default (use --enable-werror to turn it back on).
bfd/ChangeLog:
* development.sh: New file.
* warning.m4 (AM_BINUTILS_WARNINGS): Source bfd/development.sh.
Make -Werror the default with GCC only if DEVELOPMENT is true.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add
$(srcdir)/development.sh.
* Makefile.in, configure: Regenerate.
binutils/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gas/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gold/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): New.
* Makefile.in, configure: Regenerate.
gprof/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
ld/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
opcodes/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gdb/ChangeLog:
* development.sh: Delete.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure.ac: Adjust development.sh source call.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
* configure.ac: Adjust development.sh source call.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure: Regenerate.
Tested on x86_64-linux by building two ways: One with DEVELOPMENT
set to true, and one with DEVELOPMENT set to false. In the first
case, I could see the use of -Werror, while it disappeared in
the second case.
bfin, msp, and score all used an extra parameter to genscripts.sh
to select a "customizer_script" different from the standard one
named from the emulation. This patch renames the scripts to avoid
the need, tidying them in the process.
* emulparams/elf32bfin.sh: Rename from bfin.sh.
* emulparams/elf32bfinfd.sh: Update to suit.
* emulparams/: Delete.
* emulparams/msp430.sh: Rename from msp430all.sh. Remove
MSP430_NAME and msp430X vars.
* emulparams/msp430X.sh: New.
* emulparams/: Delete.
* emulparams/score3_elf.sh: Rename from scoreelf.sh. Remove
SCORE_NAME and score7_elf ARCH setting.
* emulparams/score7_elf.sh: New.
* Makefile.am (eelf32bfin.c, eelf32bfinfd.c): Update dependencies.
(emsp430.c, emsp430X.c, escore3_elf.c, escore7_elf.c): Likewise.
* Makefile.in: Regenerate.
* genscripts.sh: Delete customizer_script param.