* lib/mi-support.exp (mi_reinitialize_dir): Check mi level
to see whether we are using the new -environment-directory
command which resets via -r or the old version of the command
which may prompt the user. Part of fix for gdb/741.
appear in the line number info, but not in the preprocessor macro
info.
* lib/gdb.exp (gdb_internal_error_regexp): New variable.
(gdb_internal_error_resync): New procedure.
(gdb_test): If the command results in an internal error,
answer GDB's questions until we get back to a prompt.
* lib/mi-support.exp (mi_gdb_start): Verify the startup message
for mi1 and current mi is in correct format. New mi startup message
should be in mi console format. This is part of fix for PR gdb/604.
regexp for stopping at main. Could have multiple event notifications.
Don't assume that main was declared with no parameters.
(mi_next): Use mi_step_to.
(mi_step): Use mi_next_to.
information about preprocessor macros.
* gdb/testsuite/lib/gdb.exp (get_debug_format): Tolerate message
saying whether preprocessor macro information is present.
* gdb/doc/gdb.texinfo (Symbols): Update documentation for `info
source' command.
* lib/gdb.exp (gdb_wrapper_init): Just because
gdb_wrapper_file exists, this does not mean that the file
should not be rebuilt. That is what gdb_wrapper_initialized
is for.
(default_gdb_init): Reset gdb_wrapper_initialized.
* lib/gdb.exp (gdb_test): Add case to allow for status wrapper.
(gdb_continue_to_end): Accept output from status wrapper.
* gdb.base/ending-run.exp: Add case for output from status wrapper.
Clean up fail messages to match pass messages.
Enable the "needs_status_wrapper" testsuite feature.
* lib/gdb.exp (gdb_wrapper_init): New procedure.
(gdb_compile): Conditionally call gdb_wrapper_init.
* gdb.base/a2-run.exp: Recognize output from status wrapper.
* gdb.c++/method.exp: Recognize output from status wrapper.
* lib/gdb.exp (test_debug_format): New proc.
(setup_xfail_format): Use new proc test_debug_format.
* gdb.base/constvars.exp (local_compiler_xfail_check): New
proc; use new service proc test_debug_format.
Replace all other "gcc_compiled" tests with this test.
* gdb.base/volatile.exp (local_compiler_xfail_check): New
proc; use new service proc test_debug_format.
Replace all other "gcc_compiled" tests with this test.
2001-09-19 Frank Ch. Eigler <fche@redhat.com>
* lib/insight-support.exp (_gdbtk_xvfb_init): Set DISPLAY
to localhost:NNN instead of :NNN, in case Xvfb is listening
only on TCP.
set up the display for testing.
(gdbtk_start): Convert all paths to paths that tcl will like.
Export target information to environment.
(_gdbtk_xvfb_init): New proc to start Xvfb if available and
necessary.
(_gdbtk_xvfb_exit): New proc to kill Xvfb if necessary.
(to_tcl_path): New proc to convert a given pathname into
a path acceptible as an argument to a tcl command.
(_gdbtk_export_target_info): New proc to export target info
into the environment for gdbtk testing.
(gdbtk_done): New proc to signal end-of-test.
* Makefile.in (UIOUT_CFLAGS): New macro. CFLAGS needed for uiout code
to be compiled. Defines UI_OUT.
(SUBDIR_MI_CFLAGS): Defines MI_OUT, not UI_OUT.
(INTERNAL_WARN_CFLAGS): Also include UIOUT_CFLAGS.
* configure.in (UIOUT_CFLAGS): New configuration variable.
(--with-uiout): New configuration option. Causes uiout code to
be compiled, instead of the old *printf one.
* configure: Regenerate.
* top.c (print_gdb_version): Test for and print MI_OUT, not UI_OUT.
* testsuite/lib/mi-support.exp (mi_gdb_start): Test for MI_OUT,
not UI_OUT.
* lib/gdb.exp (gdb_skip_float_test): New proc. Skip test if
no floating point support.
(gdb_skip_stdio_test): New proc. Skip test if no stdio support.
* gdb.base/call-ar-st.exp: Use above procs to skip tests.
* gdb.base/call-rt-st.exp: Ditto.
* gdb.base/call-strs.exp: Ditto.
* gdb.base/sizeof.exp (check_sizeof): Skip if no printf support.
* gdb.base/varargs.exp: Skip entire test if no printf support.
* gdb.base/ending-run.exp (Step to return): Skip if no printf supt.
* gdb.base/shlib-call.exp: Skip several tests if no printf support.
Add support for a variable object that tries to evaluate itself in
the currently selected frame, rather than in a fixed frame.
* wrapper.c,h (gdb_parse_exp_1): Added a wrapper for
gdb_parse_exp_1.
* varobj.h: Added USE_CURRENT_FRAME to varobj_type & changed def'n
of varobj_create.
* varobj.c (varobj_list): Return type indicates whether the
variable's type has changed (for current frame variables).
(varobj_update): Handle the case where the variable's type has
changed.
(delete_variable_1): Allow for deletion of variables that have not
been installed yet.
(new_root_variable): Initialize use_selected_frame variable.
(value_of_root): This is where most of the work to handle "current
frame" variables was added. Most of the complexity involves
handling the case where the type of the variable has changed.
(varobj_create): Add a "type" argument, to tell if the
variable is one of these "current frame" variables. Also protect
call to parse_exp_1 from long jumping.
* mi-var-block.exp: The error report from varobj_create changed
since I am now trapping parse_exp_1 errors. Change the tests to
match the new error message.
* mi-var-child.exp: Ditto.
* mi-var-cmd.exp: Ditto.
* lib/gdb.exp: Fix the gdbtk_start routine to correctly find all
the library directories.
* gdbtk-varobj.c (variable_create): Pass the correct
"how_specified" flag to the varobj_create routine.
* configure.in: Add options for gdbtk testsuite.
* configure: Regenerate.
* gdb.gdbtk: New directory to hold gdbtk tests.
* gdb.gdbtk/console.{exp, test}: New console window tests.
* lib/gdb.exp(gdb_expect): Set remote_suppress_flag if
suppress_flag has been set.
(gdb_step_for_stub): Check for gdb,use_breakpoint_for_stub
target feature.
(gdb_run_cmd): Look for gdb,do_reload_on_run target feature--if it
exists, reload the executable and do a "continue" instead of
doing a jump.
(runto_main): Use gdb_step_for_stub.
* gdb.base/break.exp: Use gdb_step_for_stub. Also, rename certain
tests to have unique names.
* gdb.base/callfuncs.exp: Ditto.
* gdb.base/commands.exp: Ditto.
* gdb.base/default.exp: Ditto.
* gdb.base/help.exp: Ditto.
* gdb.base/list.exp: Ditto.
* gdb.base/opaque.exp: Ditto.
* gdb.base/printcmds.exp: Ditto. Use a loop to emit multiple
similar tests.
* gdb.base/setshow.c: Add set_debug_traps/breakpoint calls.
* gdb.c++/cplusfuncs.cc: Ditto.
* gdb.c++/virtfunc.cc: Ditto.
* config/monitor.exp: Keep track of the last file we saw, rather
than trying to get the info from gdb.
* gdb.fortran/types.exp: Move comment to previous line.
Fixes for TCL8 miscellaneous problems, plus other changes.
if we can't get a debug format from GDB (we may be testing an
older GDB). Use a 10 second timeout when checking for the format.
* gdb.stabs/weird.exp: Fix quoting.
until it has been modified to work with the new testsuite.
* gdb.*/*.exp: Instead of causing 1 unresolved test when the
testcase won't compile, cause all of the testcases in the file to
fail instead.
* lib/gdb.exp(gdb_suppress_entire_file): New procedure.
(gdb_clear_suppressed): New procedure.
(gdb_stop_suppressing_tests): Only clear suppress_flag if
it contains a positive value.
(get_debug_format): New function to get debug format.
(debug_format): New global variable to hold last value set
by get_debug_format.
* gdb.base/list.exp: Call get_debug_format and expect some
tests to fail for DWARF 1 and COFF formats.
* gdb.c++/ptype.exp: Ditto.
* gdb.c++/classes.exp: Ditto.
* gdb.c++/cplusfuncs.exp: Ditto.
* gdb.c++/inherit.exp: Ditto.
* gdb.c++/templates.exp: Ditto.
* gdb.c++/virtfunc.exp: Ditto.
host doesn't have a currently-open connection.
* config/sparclet.exp: Cleanups and fixes to make it generic for
any gdb stub target. Handle cases where gdb doesn't respond when
interrupted in a sane fashion.
* config/m32r.exp: Load sparclet.exp instead of trying to do the
same thing in a totally different way.
* config/monitor.exp: Pass in timeouts to gdb_expect instead of
setting "timeout".
(gdb_start): We set the global gdb_prompt variable in
default_gdb_init now.
initialize.
(default_gdb_init): New procedure; allow gdb_init to be overridden
by a target configuration file.
(gdb_expect): Pass the timeout to remote_expect.
* config/dos.exp(dos_wait): Add timeout parameter.
* lib/remote.exp(remote_expect): Add timeout parameter.
(remote_wait): Ditto.
(standard_wait): Ditto. Also give up if the program outputs
more than 512,000 bytes.
* config/vxworks.exp: Use timeout parameter instead of setting
timeout variable.
* config/dos.exp: Ditto.
* config/ddb.exp: Ditto.
* lib/mondfe.exp: Ditto.
* lib/rlogin.exp: Ditto.
* lib/telnet.exp: Ditto.
* config/base68k.exp: Ditto.
* config/i386-bozo.exp: Ditto.
* config/gdb-comm.exp: Ditto.
* config/gdb_stub.exp: Ditto.
* config/i960.exp: Ditto.
* config/ddb-ether.exp: Ditto.
* config/sim.exp: Ditto.
* lib/g++.exp(g++_init): Use g++_include_flags instead of making
up the includes ourselves.
exit status and/or results from the target.
* gdb.base/watchpoint.exp, gdb.base/langs.exp: Likewise.
* lib/gdb.exp: Remove old (now bogus) initialization of
noinferior, noargs, noresults and nosignals.
More cleanups for new testing framework.
* config/slite.exp: Try to connect multiple times to the board
before rebooting. Only send a "monitor run" if need_monitor_run
is set.
* gdb.base/break.exp: Don't do the "stub continue" test if
the target has gdb_stub set.
* gdb.base/callfuncs.exp: Increase the timeout.
* gdb.base/interrupt.exp: Don't even try to compile the testcase
if the target has gdb,noinferiorio set.
* gdb.base/list.exp: Increase match_max to 10000 characters.
* gdb.base/sigall.exp: Check for gdb,nosignals on the target.
* gdb.base/watchpoint.exp: Check for gdb,noinferiorio on the
target.
* lib/gdb.exp(gdb_run_cmd): Fix for targets that use stubs.
Misc fixes for sparclite and SH.
parenthesis in case it contains multiple regexps separated
with |.
Fixes last nights native failures.
* gdb.base/watchpoint.exp: Use gdb_test.
* gdb.base/default.exp: Ditto.
More improvements.
* gdb.base/signals.exp: Check for a gdb,nosignals feature of
the target.
* gdb.base/watchpoint.exp: Fix regexp.
Random miscellaneous fixes. Gotta dig up all these global variables someday..
close and wait commands, as the descriptor may now be
invalid. Always call "remote_close host".
Makes sure things get cleaned up if gdb dies in the middle of a test.
"p func1 ()" and note that rests of tests are skipped.
* gdb.base/corefile.exp: Add i*86-*-linux* and m68*-*-hpux*
setup_xfails for "print func2::coremaker_local".
Add i*86-*-linux* setup_xfail for "backtrace in corefile.exp".
* gdb.base/mips_pro.exp: Restart gdb in this test so it isn't
affected by the previous run test.
* gdb.chill/misc.exp: Add m68*-*-hpux* setup_xfails for
"print array () ubyte (foo)" and "print/x array () byte (\$i)"
* gdb.chill/pr-8742.exp: Add m68*-*-hpux* setup_xfails for
"pass int powerset tuple" and "pass modeless int powerset tuple".
* gdb.chill/tests2.exp: Add m68*-*-hpux* setup xfails for
"real write 4" and "real write 8".
* gdb.shill/tuples.exp: Add i*86-*-linux* and m68*-*-hpux*
setup_xfails for "print vs1 after tuple assign 2",
"print \$i after tuple assign 2", and
"print vs2 after tuple assign 2".
* lib/gdb.exp (gdb_test): When a gdb aborts, print a more
meaningful error message and return -1 so the caller can
suppress further tests and avoid a cascade of errors.
each signal's status in the output of "handle all print".
* lib/gdb.exp (gdb_test): Document that the pattern must NOT include
the \r\n sequence that immediately precedes the gdb prompt.
* gdb.base/a1-selftest.exp: Save original timeout and restore
after test.
gdb initialization, also report how long dejagnu waited. Restore
old timeout before doing error return. Temporarily increase timeout
by 3 minutes to allow for slow startups over heavy NFS use.
printing of '\'' (which is what the comment says we are testing,
even though we were not), not '''.
(test_integer_literals_rejected): Test that printing ''' is an error.
* gdb.fortran/exprs.exp, gdb.fortran/types.exp,
gdb.chill/chexp.exp, gdb.base/printcmds.exp,
gdb.c++/cplusfuncs.exp, gdb.chill/callch.exp, gdb.chill/misc.exp,
gdb.chill/pr-6292.exp, gdb.chill/string.exp, gdb.chill/tuples.exp:
Use gdb_test not test_print_accept.
* lib/gdb.exp: Remove test_print_accept.
only \r\n, not .*. The test can pass .* as the last thing in
$pattern if that is what it wants. In addition to providing this
flexibility, this change should speed up pattern matching in cases
where the pattern already ended with .* (there were a number of
them). This change also helps catch bad patterns--in the old
scheme the typo "char \*" instead of "char \\*" would pass. Now
it is caught.
* Many .exp files: Update callers.
gdb.c++/inherit.exp, gdb.c++/templates.exp, gdb.c++/virtfunc.exp,
gdb.fortran/exprs.exp, gdb.fortran/types.exp, gdb.chill/chexp.exp,
gdb.base/printcmds.exp: Remove passcount, failcount, etc., stuff;
it makes the tests harder to understand and confuses test-o-matic.
The preferred style is that each test provides a PASS or a FAIL,
and has a unique message (e.g. "continue #54" not just "continue")
which is the same for the pass and the fail.
* gdb.fortran/exprs.exp, gdb.fortran/types.exp,
gdb.chill/chexp.exp: Move test_print_accept and test_print_reject
to lib/gdb.exp.
* gdb.base/printcmds.exp: Use test_print_accept. Remove
prt_accept which was basically the same thing. Likewise for
test_print_reject and prt_reject.
* lib/gdb.exp (test_print_reject): Add some more error message
patterns to match from the former printcmds.exp (prt_reject).
* gdb.c++/classes.exp, gdb.base/scope.exp: Remove spurious xfails.
One defect of the passcount stuff is that some of it failed to
report XPASS where appropriate.
* gdb.c++/cplusfuncs.exp (print_addr_of): No longer accept extra
stuff before and after arg in expected pattern.
(test_paddr_operator_functions): Re-do test without print_addr_of;
this is the only test which seems to want extra stuff there.
(which was basically just a local version of the same thing). In
addition to avoiding duplication, gdb_test_exact is faster.
* lib/gdb.exp (gdb_test_exact): Fix typo.
Migrated dejagnu testcases and support files for testing nm to
gdb/testsuite from deja-gnu. These files were moved "as is"
with no modifications. This migration is part of a major overhaul
of dejagnu. The modifications to these testcases, etc., which
will allow them to work with the new version of dejagnu will be
made in a future update.
Jeff Johnston
Andrew Cagney
Jim Blandy
Keith Seitz
Corinna Vinschen
Kevin Buettner
Michael Snyder
Daniel Jacobowitz
Frank Ch. Eigler
Mark Kettenis
Fernando Nasser
Nicholas Duffek
Anthony Green
Jim Ingham
Elena Zannoni
Jason Molenda
Stan Shebs
Keith Seitz
Bob Manson
Fred Fish
Jeff Law
Kung Hsu
Jim Kingdon
J.T. Conklin
Per Bothner
Bill Cox
Rob Savoye
K. Richard Pixley
Mike Werner