* infptrace.c (child_xfer_memory): Likewise.
* monitor.c (monitor_xfer_memory): Likewise.
* remote-adapt.c (adapt_xfer_inferior_memory): Likewise.
* remote-array.c (array_xfer_memory): Likewise.
* remote-bug.c (bug_xfer_memory): Likewise.
* remote-e7000.c (e7000_xfer_inferior_memory): Likewise.
* remote-eb.c (eb_xfer_inferior_memory): Likewise.
* remote-es.c (es1800_xfer_inferior_memory): Likewise.
* remote-mips.c (mips_xfer_memory): Likewise.
* remote-mm.c (mm_xfer_inferior_memory): Likewise.
* remote-nindy.c (nindy_xfer_inferior_memory): Likewise.
* remote-os9k.c (rombug_xfer_inferior_memory): Likewise.
* remote-rdi.c (arm_rdi_xfer_memory): Likewise.
* remote-rdp.c (remote_rdp_xfer_inferior_memory): Likewise.
* remote-sds.c (sds_xfer_memory): Likewise.
* remote-sim.c (gdbsim_xfer_inferior_memory): Likewise.
* remote-st.c (st2000_xfer_inferior_memory): Likewise.
* remote-udi.c (udi_xfer_inferior_memory): Likewise.
* remote-vx.c (vx_xfer_memory): Likewise.
* remote.c (remote_xfer_memory): Likewise.
* target.c (debug_to_xfer_memory, do_xfer_memory): Likewise.
* target.h (child_xfer_memory, do_xfer_memory, xfer_memory): Likewise.
* target.h (#include "memattr.h"): Added.
(target_ops.to_xfer_memory): Add attrib argument.
* wince.c (_initialize_inftarg): Removed call to set_dcache_state.
* dcache.h (set_dcache_state): Removed declaration.
* dcache.c (set_dcache_state): Removed definition
* dcache.c: Update module comment, as dcache is now enabled and
disabled with memory region attributes instead of by the global
variable "remotecache". Add comment describing the interaction
between dcache and memory region attributes.
(dcache_xfer_memory): Add comment describing benefits of moving
cache writeback to a higher level.
(dcache_struct): Removed cache_has_stuff field. This was used to
record whether the cache had been accessed in order to invalidate
it when it was disabled. However, this is not needed because the
cache is write through and the code that enables, disables, and
deletes memory regions invalidate the cache. Add comment which
suggests that we could be more selective and only invalidate those
cache lines containing data from those memory regions.
(dcache_invalidate): Updated.
(dcache_xfer_memory): Updated.
(dcache_alloc): Don't abort() if dcache_enabled_p is clear.
(dcache_xfer_memory): Removed code that called do_xfer_memory() to
perform a uncached transfer if dcache_enabled_p was clear. This
function is now only called if caching is enabled for the memory
region.
(dcache_info): Always print cache info.
* target.c (do_xfer_memory): Add attrib argument.
(target_xfer_memory, target_xfer_memory_partial): Break transfer
into chunks defined by memory regions, pass region attributes to
do_xfer_memory().
* dcache.c (dcache_read_line, dcache_write_line): Likewise.
* Makefile.in (SFILES): Add memattr.c.
(COMMON_OBS): Add memattr.o.
(dcache.o): Add target.h to dependencies.
* memattr.c: New file.
* memattr.h: Likewise.
* Move target_signal_from_host, target_signal_to_host, and
store_waitstatus from inftarg.c to target.c. procfs needs them.
* target.c: Include "wait.h" and <signal.h>.
* target.h, infrun.c (proceed), proceed callers: Pass new code
TARGET_SIGNAL_DEFAULT instead of -1. This avoids problems with
enums being treated as unsigned and is cleaner.
* infrun.c (signals_info): Don't print TARGET_SIGNAL_DEFAULT or
TARGET_SIGNAL_0.
* infcmd.c (signal_command), infrun.c (signals_info):
Don't allow user to specify numeric equivalent of
TARGET_SIGNAL_DEFAULT.
struct target_waitstatus. Change status argument to target_wait to
be struct target_waitstatus * instead of int *.
* target.h, infrun.c, all targets: Change type of signal arguments
to resume(), proceed(), and target_resume() from int to enum
target_signal.
* All targets (*_wait, *_resume): Change accordingly.
* infcmd.c (program_info, signal_command), throughout infrun.c,
* fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff.
* convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex
signal code stuff right with the new signals would be non-trivial).
* inferior.h (stop_signal): Make it enum target_signal not int.
* target.c, target.h (target_signal_to_string, target_signal_to_name,
target_signal_from_name): New functions.
* inftarg.c, target.h (target_signal_to_host, target_signal_from_host,
store_waitstatus): New functions.
* procfs.c (procfs_notice_signals): Use them.
* i960-tdep.c (i960_fault_to_signal): New function, to replace
print_fault.
* config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL.
Change all references to stdout/stderr to gdb_stdout/gdb_stderr.
Replace all calls to stdio output functions with calls to
corresponding _unfiltered functions (`fprintf_unfiltered')
Replaced calls to fopen for output to gdb_fopen.
Added sufficient goo to utils.c and defs.h to make the above work.
The net effect is that stdio output functions are only directly used
in utils.c. Elsewhere, the _unfiltered and _filtered functions and
GDB_FILE type are used.
In the near future, GDB_FILE will stop being equivalant to FILE.
The semantics of some commands has changed in a very subtle way:
called in the right context, they may cause new occurences of
prompt_for_continue() behavior. The testsuite doesn't notice anything
like this, though.
Please respect this change by not reintroducing stdio output
dependencies in the main body of gdb code. All output from commands
should go to a GDB_FILE.
Target-specific code can still use stdio directly to communicate with
targets.
to tm-a29k.h and a29k-tdep.c and make it an enum.
* a29k-tdep.c (a29k_get_processor_type): New function. Fix many
aspects of how we detected the processor type.
* remote-udi.c, remote-adapt.c, remote-mm.c (*_open): Call it
rather than figuring out the type ourselves.
* Makefile.in (CLIBS): Reorder to make Lynx ld happy.
* (HFILES): New file thread.h.
* (OBS): New file thread.c.
* configure.in: Host config for Lynx/386.
* fork-child.c (fork_inferior): Call init_thread_list().
* infrun.c (resume): Add pid to invocation of target_resume().
* (wait_for_inferior): Pay attention to pid from target_wait().
Multi-threading code now uses this to determine what to do.
* inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro.
Use target_pid_to_str() macro throughout when printing pid.
* inferior.h (child_resume): Add pid to prototype.
* hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as
argument, instead of using inferior_pid.
* procfs.c (procfs_resume): Pass in pid as argument. Ignored for
now. Use target_pid_to_str() macro throughout for printing process id.
* remote-adapt.c (adapt_resume): Pass in pid as argument.
* remote-eb.c (eb_resume): Pass in pid as argument.
* remote-es.c (es1800_resume): Pass in pid as argument.
* remote-hms.c (hms_resume): Pass in pid as argument.
* remote-mips.c (mips_resume): Pass in pid as argument.
* remote-mm.c (mm_resume): Pass in pid as argument.
* remote-monitor.c (monitor_resume): Pass in pid as argument.
* remote-nindy.c (nindy_resume): Pass in pid as argument.
* remote-sa.sparc.c (remote_resume): Pass in pid as argument.
* remote-sim.c (rem_resume): Pass in pid as argument.
* remote-sp64sim.c (simif_resume): Pass in pid as argument.
* remote-st.c (st2000_resume): Pass in pid as argument.
* remote-udi.c (udi_resume): Pass in pid as argument.
* remote-vx.c (vx_resume): Pass in pid as argument.
* remote-z8k.c (rem_resume): Pass in pid as argument.
* remote.c (remote_resume): Pass in pid as argument.
* solib.c (solid_create_inferior_hook): Pass inferior_pid to
target_resume().
* target.c (normal_pid_to_str): New routine to print out process
ID normally.
* target.h (struct target_ops): Add pid to prototype at
to_resume(). (target_resume): Add pid argument.
* (target_pid_to_str): Default definition for normal type pids.
* thread.c, thread.c: New modules for multi thread/process control.
* target.h: Comments on target_attach args and results.
* infcmd.c (attach_command): Check for existing execution, call
target_attach, set up terminal status and wait_for_inferior, wait
for the attach status, and do normal_stop.
* inftarg.c (child_attach): Remove target independent stuff.
* remote-adapt.c (adapt_attach): Ditto.
* remote-mm.c (mm_attach): Ditto.
* remote-udi.c (udi_attach): Ditto.
* remote-vx.c (vx_attach): Ditto.
Cleanup.
* remote-hms.c (hms_attach): Remove completely, it was useless.
* remote-mm.c, remote-hms.c, remote-udi.c, remote-adapt.c: Remove
commented-out start_remote calls.
* remote-hms.c, remote-adapt.c, remote-mm.c, remote-udi.c: Remove
DENTER and DEXIT macros and their calls. Use a real debugger --
like gdb -- to see what functions are being called when.
process will be the default target.
* target.c (find_default_run_target, find_default_attach,
find_default_create_inferior, return_zero): new functions.
(cleanup_target): Make return_zero the default for to_can_run.
* exec.c (exec_ops), core.c (core_ops): Replace child_attach and
child_create_inferior references with find_default_XXX instead.
* target.h (struct target_ops): new field, to_can_run.
(find_default_attach, find_default_create_inferior): new prototypes.
(target_can_run): new macro.
* Also added a zero (default) to_can_run element to all static
struct target_ops initializations throughout GDB, except:
* inftarg.c (child_ops): Use new child_can_run() to enable child runs.
* infrun.c (child_create_inferior): Clean up error handling when
no exec file is specified.
(child_attach): Don't require exec file.
* All GDB files that #include defs.h: Removed stdio.h.
(defs.h): #include stdio.h.
This has been tested by building GDBs for all targets hosted on Sun4.
None of the build problems were related to stdio.h inclusion. (n.b.
many configurations don't build for other reasons.)
remote-hms.c, remote-mm.c, remote-nindy.c, remote-vx.c, remote.c,
target.c, target.h, valarith.c, valops.c, value.h, xcoffexec.c:
Remove to_call_function and target_call_function, since it
always calls the same thing (call_function_by_hand).
Kevin Buettner
J.T. Conklin
Andrew Cagney
Jason Molenda
Stan Shebs
Fernando Nasser
David Taylor
John Metzler
Fred Fish
Stu Grossman
Jim Kingdon
Thomas Lord
K. Richard Pixley
John Gilmore
Michael Tiemann