include of "serial.h".
* Makefile.in (remote_utils_h): Update.
* monitor.h (struct serial): Declare as opaque. Remove include of
"serial.h".
(struct monitor_ops): Replace serial_t with `struct serial *'.
* monitor.c (monitor_desc): Ditto.
* nec4102rom.c : New file implements rom monitor adapter for
nec-vr4102 board. This board hosts the vr4111 chip. This file
required extenstions to the monitor_ops structure, hooks for wiat
filter, new flags. This version does not support more than one
breakpoint and resuming after a breakpoint in 16 bit mode is
completely disfunctional. * monitor.h : Defined additional hooks
for dmpregs, confinuer_hooks and wait_filter. These additions
require that all rom monitor interfaces be recoded to to
initializa monitor ops using assignments rather than static
structure initialization. Added new bits to flags
MO_EXACT_DUMPADDR, MO_HAS_BLOCKWRITES
* monitor.c (RDEBUG): Conditional tracing throughout the file.
(fromhex): Now recognized upper cse hex digits
(monitor_printf_noecho):
(monitor_readchar): Tracing interferes with input timing.
(monitor_open): Register different memory write functions with
dcache_init if MO_HAS_BLOCKWRITES.
(flush_monior_dcache): Added as an additional utilty.
(monitor-resume): Call continue hook if one has been supplied.
(monitor_wait_filter): New function Factored out of monitor wait
and used if alternate wait-filter has not been provided.
(monitor_wait): call alternate wait filter if provided. Call
monitor_dump_regs, a new function factored out from inline code.
(monitor_dump_block): A new function used as a utility when
monitors must dump several blocks of registers using different
commands.
(monitor_dump_regs): Call alternate function if provided. Uses new
hook in monitor.h.
(monitor_write_memory): Engage previouly added hook
MO_FILL_USES_ADDR.
(monitor_write_even_block): new function supports writing long
blocks of 4byte words.
(longlongendswap): new internal function
(monitor_write_memory_longlongs): new function writes large blocks
using command to enter a long long.
(monitor_write-memory_block): new Function figures out which block
mod to use.
(monitor_read_memory): Can now handle dump formats in which the bytes
preceeding the requested data is not printed.
* monitor.h: Added new fields to the structure
* monitor.c (monitor_debug): Move to utils.c, rename to puts_debug.
(monitor_write_memory, monitor_read_memory, monitor_insert_breakpoint,
monitor_remove_breakpoint): Remove useless address bits if current
monitor has MO_ADDR_BITS_REMOVE flag.
* monitor.h (MO_ADDR_BITS_REMOVE): Define.
* utils.c (puts_debug): Formerly monitor_debug from monitor.c;
move here and make public. Add better support for carriage returns.
* defs.h (puts_debug): Declare.
* dsrec.c (load_srec): Use puts_debug to print remotedebug information.
Output header record correctly.
(make_srec): Output a header record instead of a termination record
if sect is non-NULL (value is ignored), but abfd is NULL.
* config/mips/tm-tx39.h (DEFAULT_MIPS_TYPE): Remove definition.
(REGISTER_NAMES): Define to add R3900-specific registers.
* config/mips/tm-tx39l.h: Ditto.
* config/mips/tx39.mt (TDEPFILES): Add dve3900-rom.o and support files.
* config/mips/tx39l.mt: Ditto.
that directory.
* defs.h utils.c (error warning): Make message be const.
* main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr
to hook. Otherwise send it to fputs.
* monitor.c monitor.h (monitor_get_dev_name): New function. Does
the obvious.
* remote-e7000.c: Remove debugify stuff. Change printf, fprintf
to _filtered forms to make output appear in GUIs. Replace all
uses of SERIAL_READCHAR with readchar, which has better error
checking.
* (e7000_parse_device): Add prototype.
* (readchar): Improve doc. Handle random serial errors.
* (expect): Disable notice_quit code. It's busted. Remove
serial error handling (it's now handled in readchar). Remove
remote_debug echoing. That's handled in readchar as well.
* (e7000_parse_device): Remove serial_flag arg. It's not
necessary.
* (e7000_open): Split into two pieces. Second part is
e7000_start_remote, and is error protected. Now, when we connect
to the target, we setup the initial frame and registers so that
the user gets an immediate indication of where the target is.
* (gch): Remove debug output. That's handled by readchar.
* (e7000_read_inferior_memory): Handle errors better.
* (_initialize_remote_e7000): Get rid of `<xxx>' things from
command names. They show up when doing completion and confuse
things horribly.
* ser-e7kpc.c: Remove the last seven months of brain damage. Get
rid of the DLL's since we can access the device directly from Win32s
and Win95. Get rid of debugify crud.
* serial.c: Remove debugify cruft.
* (serial_logchar serial_log_command serial_write serial_readchar
serial_send_break serial_close): Merge common functionality into
serial_logchar. Clean up rest of routines.
* sparclet-rom.c: Disembowel. Leave only download routine.
Download routine now switches to remote target automatically.
* top.c (disconnect): Only define if SIGHUP is defined. Cleans
up MSVC/Win32 problem.
* utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout
or gdb_stderr.
* config/sh/tm-sh.h: Define TARGET_SH for WinGDB.
* config/sparc/tm-sparclet.h: Remove override for prompt.
* m32r-tdep.c: Improved frame_chain and fn prologue analysis.
* configure.tgt: Add entry for m32r target.
* monitor.h: Add a flag to tell monitor_store_register to use
(val, regno) instead of (regno, val).
* monitor.c: Make monitor_store_register honor the above flag.
Make monitor_exp ignore DC1/DC3 for m32r.
Increase buf size in monitor_dump_regs.
* monitor.h,monitor.c:
Added monitor flags MO_NO_ECHO_ON_SETMEM (don't expect echo on
setmem command), MO_RUN_FIRST_TIME (if command to start process
running on target is different from one to continue execution),
MO_HEX_PREFIX (if addresses from monitor have a "0x" prefix).
* monitor.c,parse.c,sparc-tdep.c:
Don't require strings in the registers array. This is to allow
NULLs to be place holders in the tm-*.h file so that only minor
changes are needed when a new processor is introduced (eg, one
without floating point).
* sparc-tdep.c: Conditionally remove dependancies on floating point.
* sparclet-rom.c,config/sparc/sparclet.mt,config/sparc/tm-sparclet.h:
New files for target sparclet.
* symfile.c: Add option for 2nd parameter on load command : a load
offset added to the vma of each section.
like EST visionICE that send back an ACK after each S-record.
* monitor.c (monitor_wait_srec_ack): New function.
(monitor_load): Pass monitor_wait_srec_ack to load_srec
if the monitor's MO_SREC_ACK flag is set.
* monitor.h: Define MO_SREC_ACK flag.
* remote-est.c (est_cmds): Add MO_SREC_ACK flag.
* sh3-rom.c (sh3_load): Accomodate change in load_srec prototype.
* srec.h: Add WAITACK parameter to load_srec prototype.
* monitor.c (monitor_debug): Change remotedebug to buffer strings.
* monitor.c (monitor_open): Add test for flag MO_NO_ECHO_ON_OPEN before
epecting prompt and echo during open.
* monitor.c (monitor_stop): Add test for flag MO_SEND_BREAK_ON_OPEN to
determine if break should be sent as stop command.
* monitor.h: Add flags MO_NO_ECHO_ON_OPEN and MO_SEND_BREAK_ON_OPEN.
* i960-tdep.c (mon960_frame_chain_valid): New function for getting
stack frame on mon960.
* Makefile.in: Add mon960 files.
* configure.in: Changed i960-*-coff* and i960-*-elf* to target mon960;
added i960-nindy-coff* and i960-nindy-elf* for target nindy.
* configure: Regenerated.
* config/i960/mon960.mt, config/i960/tm-mon960.h: New files;
support mon960 rom monitor on i960.
sh3 monitor support.
* monitor.c: Cleanup regexp compilation stuff to make it easier
to use several regexps.
* monitor.h: Get rid of struct rom_cmd_data. It's no longer used.
* config/m68k/tm-monitor.h: Don't redefine NUM_REGS here. It just
causes GDB to crash.
attribute when compiled by gcc.
* defs.h, language.h, monitor.h: Changed many function
declarations to use ATTR_FORMAT.
* breakpoint.c (delete_command); source.c (directory_command);
top.c (define_command): Changed call to query() that had too
many arguments.
* printcmd.c (address_info): Changed call to printf_filtered()
that had too many arguments.
* (unwind_command): Clean it up and make it print things out
nicer.
* monitor.c: Add ^C handling capability (mostly ripped off from
remote.c).
* (monitor_printf): Make it check the command echo.
* (monitor_printf_noecho): Similar to above, but doesn't check
for echo.
* (monitor_stop): No longer waits for prompt. That is the job of
the caller. This makes things work much better for monitor_wait,
which waits for the prompt itself.
* (monitor_open): Deal with new monitor_stop semantics. Also,
flush input after sending init strings to get rid of junk that may
be output. Also, don't always send \r to remote. Use
monitor_ops->line_term cuz proper character isn't always \r.
* (monitor_fetch_register): Switch to completely different
algorithm to deal with lame-ass monitors which put spaces in the
middle of numbers, and prompt with a space!!!!!
* (monitor_read_memory_single): New routine to be used with
monitors that can only return one byte/short/long at a time. This
is selected via MO_GETMEM_READ_SINGLE.
* (monitor_load_srec): Use monitor_printf_noecho for sending S
records. Most targets don't echo them.
* (monitor.h): Get rid of cmd_delim. Add line_delim.
* op50n-rom.c (op50n_cmds): Fill it up. Make it work.
* w89k-rom.c: Change all eols from \r to \n. Change load_resp to
^Q to prevent error message.
* config/pa/tm-hppa.h (CALL_DUMMY (for hppro)): Add special
instruction sequence at end to make restore_pc_queue happy.
unnecessary remoteloadprotocol and remoteloadtype support.
* (expect expect_prompt): Change names to monitor_expect and
monitor_expect_prompt. Make them global.
* (printf_monitor): Change name to monitor_printf. Make global.
* (monitor_read_memory): Flush command echo to avoid parsing
ambiguity with CPU32Bug monitor.
* (monitor_load): Remove remoteloadprotocol and remoteloadtype
support. Call target_ops->load_routine, default to
monitor_load_srec.
* (monitor_load_srec): Remove everything but S-record support.
* monitor.h (monitor_ops): Add load_routine to provide monitor
specific download capability.
* remote-est.c: Clean up copyrights and comments.
* w89k-rom.c: Use new xmodem support.
* xmodem.c xmodem.h: New files to support xmodem downloads.
* rom68k-rom.c remote-est.c: Fix copyrights, add load_routine
entry to monitor_ops.
* cpu32bug-rom.c: New file to support Moto BCC debuggers.
* config/m68k/est.mt (TDEPFILES): Add cpu32bug.o.
* config/pa/hppapro.mt (TDEPFILES): Add xmodem.o.
* monitor.c (monitor_read_memory): Use previously mentioned flag
to send proper format memory examine commands to the w89k monitor.
Also, try to handle bizarre format of memory dump...
* op50-rom.c w89k-rom.c: Update to new monitor.[ch] conventions.
* Makefile.in (gdbtk.o): Use X11_CFLAGS to provide alternate
locations (per-host) for X11 include files.
* config/pa/hppahpux.mh (XM_CLIBS): Add -L/usr/lib/X11R5 to force
the use of R5 libs. (X11_CFLAGS): Add this to indicate the locs
of the R5 include files.
end-sanitize-gdbtk
* monitor.c monitor.h remote-est.c rom68k-rom.c: Add start of
support for interrupting target.
* monitor.c (monitor_open): Send stop command before doing
anything else.
* (monitor_load_srec): Fix record size calculation to prevent end
of segment from getting trashed.
* rom68k-rom.c: Update to latest version of struct monitor_ops.
* config/sparc/tm-sparc.h (FIX_CALL_DUMMY): Fix byte-order
problems. Makes DOS hosted function calling work.
* sparclite/crt0.s: Define _start to make COFF happy.
* testsuite/config/rom68k.exp (gdb_target_rom68k): Use
$targetname, $serialport and $baud instead of hardwired variables.
* testsuite/gdb.base/{sigall.exp signals.exp}: Skip these if the
target doesn't support signals.
* findvar.c: Move default def of CANNOT_STORE_REGISTER closer to
the beginning of the code.
* (write_register_gen): New routine. Analogous to
read_register_gen.
* (write_register_bytes): Another rewrite! Make it smarter about
not updating regs with the same value.
* monitor.c (printf_monitor readchar): Use stderr instead of
stdout to output debug info. Also cleanup readchar a little.
* (expect): Make sure that excessive responses are null
terminated.
* (monitor_open): Check for magic number in monitor_ops struct.
Allow multiple commands as init strings. Also, clear all
breakpoints.
* (monitor_resume monitor_wait): Send a command to dump all the
regs for those targets which don't do so when waking up after a
continue command.
* (monitor_wait): Handle excessive response output better.
* (monitor_write_memory): Use block fill, word, and long word
commands (if they exist) to write memory more efficiently.
* General cleanups to use flag bits instead of individual flag
words in monitor_ops struct.
* (monitor_command): Return output from command.
* (monitor_load_srec): Allocate buffer only once. Use alloca.
Wait for load response string instead of using a timeout to start
sending S-records. Fix bug where value of srec_frame shrinks. If
hashmark is set, print `-' for retransmissions. General cleanups.
* (monitor_make_srec): Get rid of S-record default type kludge.
* monitor.h: Use seperate struct for memory and register
read/write commands. Memory commands can come in byte, word,
long, and longlong forms.
* (monitor_ops): Change lots of fields. Generalize some stuff.
Put all flags into flags word. Allow init to be a list of commands.
Add command for clearing all breakpoints, block fill, dumping all
registers.
* remote-est.c: Rewrite to use new monitor conventions.
* config/m68k/est.mt (TDEPFILES): Add monitor.o.
* config/m68k/tm-est.h: Set NUM_REGS to 18.
* testsuite/gdb.base/break.exp: Lots of cleanups. Use gdb_test
more thoroughly.
these routines much smarter about updating registers from the
target, only doing so when absolutely necessary. This really
speeds up register modification on some remote targets.
* monitor.c: More cleanups. Get rid of monitor_load_ascii_srec.
BFD makes this unnecessary. Lots of debugging speedups.
* (expect): NULL terminate return string.
* (monitor_open monitor_supply_register parse_register_dump
monitor_wait monitor_fetch_register): Switch to using GNU regexp
library to parse multi-register displays.
* (monitor_read_memory): Read multiple bytes (up to 16) at once.
* (monitor_create_inferior): Call clear_proceed_status to make run
command notice first breakpoint.
* (monitor_load): Clean up. Reset inferior_pid, set pc to start
address and reset symbol table stuff to make loads put things into
a fresh state.
* (monitor_load_srec): Lower sleep time to 1 second.
* monitor.h (struct monitor_ops): Add register_pattern and
supply_register to monitor_ops.
* rom68k-rom.c: Add new support for handling register dumps.
Sun make (with VPATH) work...
* monitor.c monitor.h rom68k-rom.c: Serious cleanup to make IDP
(rom68k) target work right.
* array-rom.c op50-rom.c w89k-rom.c: Partial updates to new
monitor.c interface. More work needs to be done here.
* config/m68k/tm-monitor.h: Change DECR_PC_AFTER_BREAK to 0 to
match the IDP monitor. Also, set NUM_REGS to 18 cuz there's no
floating-point for this card.
to monitor config structure for supported baud rates for a target
and variable stop bits.
* monitor.c (monitor_fetch_register): Store register values in big
endian format on any host.
Andrew Cagney