(status_pending_p_callback): Remove redundant statement. Check
for !TARGET_WAITIKIND_IGNORE, instead of
TARGET_WAITKIND_STOPPED.
(handle_tracepoints): Make sure LWP is locked. Adjust.
(linux_wait_for_event_1): Adjust.
(linux_cancel_breakpoints): New.
(unsuspend_one_lwp): New.
(unsuspend_all_lwps): New.
(linux_wait_1): If finishing a step-over, unsuspend all lwps.
(send_sigstop_callback): Change return type to int, add new
`except' parameter and handle it.
(suspend_and_send_sigstop_callback): New.
(stop_all_lwps): Add new `suspend' and `expect' parameters, and
pass them down. If SUSPEND, also increment the lwp's suspend
count.
(linux_resume_one_lwp): Add notice about resuming a suspended LWP.
(need_step_over_p): Don't consider suspended LWPs.
(start_step_over): Adjust.
(proceed_one_lwp): Change return type to int, add new `except'
parameter and handle it.
(unsuspend_and_proceed_one_lwp): New.
(proceed_all_lwps): Use find_inferior instead of
for_each_inferior.
(unstop_all_lwps): Add `unsuspend' parameter. If UNSUSPEND, them
also decrement the suspend count of LWPs. Pass `except' down,
instead of hacking its suspend count.
(linux_pause_all): Add `freeze' parameter. Adjust.
(linux_unpause_all): New.
(linux_target_ops): Install linux_unpause_all.
* server.c (handle_status): Adjust.
* target.h (struct target_ops): New fields `unpause_all' and
`cancel_breakpoints'. Add new parameter to `pause_all'.
(pause_all): Add new `freeze' parameter.
(unpause_all): New.
(cancel_breakpoints): New.
* tracepoint.c (clear_installed_tracepoints): Pause threads, and
cancel breakpoints.
(cmd_qtstart): Pause threads.
(stop_tracing): Pause threads, and cancel breakpoints.
* win32-low.c (win32_target_ops): Adjust.
* NEWS: Document new feature.
* remote.c (PACKET_qGetTIBAddr): New enum element.
(remote_get_tib_address): New function.
(init_remote_ops): Set to_get_tib_address field
to remote_get_tib_address.
(_initialize_remote): Add add_packet_config_cmd
for PACKET_qGetTIBAddr.
* target.c (update_current_target): Set default value for
new to_get_tib_address field.
* target.h (target_ops): New field to_get_tib_address.
(target_get_tib_address): New macro.
* windows-nat.c (thread_info): Add thread_local_base field.
(windows_add_thread): Add tlb argument of type 'void *'.
(fake_create_process): Adapt windows_add_thread call.
(get_windows_debug_event): Idem.
(windows_get_tib_address): New function.
(init_windows_ops): Set to_get_tib_address field
to remote_get_tib_address.
(_initialize_windows_nat): Replace info_w32_cmdlist
initialization by a call to init_w32_command_list.
(info_w32_command, info_w32_cmdlist): Removed from here...
to windows-tdep.c file.
* windows-tdep.h (info_w32_cmdlist): Declare.
(init_w32_command_list): New external function
declaration.
* windows-tdep.c: Add several headers.
(info_w32_cmdlist): to here, made global.
(thread_information_32): New struct.
(thread_information_64): New struct.
(TIB_NAME): New char array.
(MAX_TIB32, MAX_TIB64, FULL_TIB_SIZE): New constants.
(maint_display_all_tib): New static variable.
(windows_get_tlb_type): New function.
(tlb_value_read, tlb_value_write): New functions.
(tlb_value_funcs): New static struct.
(tlb_make_value): New function.
(display_one_tib): New function.
(display_tib): New function.
(show_maint_show_all_tib):New function.
(info_w32_command): Moved from windows-nat.c.
(init_w32_command_list): New function.
(_initialize_windows_tdep): New function.
New "maint set/show show-all-tib" command
New "$_tlb" internal variable.
gdbserver/ChangeLog entry:
* server.c (handle_query): Handle 'qGetTIBAddr' query.
* target.h (target_ops): New get_tib_address field.
* win32-low.h (win32_thread_info): Add thread_local_base field.
* win32-low.c (child_add_thread): Add tlb argument.
Set thread_local_base field to TLB.
(get_child_debug_event): Adapt to child_add_thread change.
(win32_get_tib_address): New function.
(win32_target_ops): Set get_tib_address field to
win32_get_tib_address.
* linux-low.c (linux_target_ops): Set get_tib_address field to NULL.
doc/ChangeLog entry:
gdb.texinfo ($_tlb): Document new automatic convinience variable.
(info w32 thread-information-block): Document new command.
(qGetTIBAddress): Document new gdbserver query.
(maint set/show show-all-tib): Document new command.
* linux-low.c (linux_remove_process): Delete.
(add_lwp): Don't set last_resume_kind here.
(linux_kill): Use `mourn'.
(linux_detach): Use `thread_db_detach', and `mourn'.
(linux_mourn): New.
(linux_attach_lwp_1): Adjust comment.
(linux_attach): last_resume_kind moved the thread_info; adjust.
(status_pending_p_callback): Adjust.
(linux_wait_for_event_1): Adjust.
(count_events_callback, select_singlestep_lwp_callback)
(select_event_lwp_callback, cancel_breakpoints_callback)
(db_wants_lwp_stopped, linux_wait_1, need_step_over_p)
(proceed_one_lwp): Adjust.
(linux_async): Add debug output.
(linux_thread_stopped): New.
(linux_pause_all): New.
(linux_target_ops): Install linux_mourn, linux_thread_stopped and
linux_pause_all.
* linux-low.h (struct lwp_info): Delete last_resume_kind field.
(thread_db_free): Delete declaration.
(thread_db_detach, thread_db_mourn): Declare.
* thread-db.c (thread_db_init): Use thread_db_mourn.
(thread_db_free): Delete, split in two.
(disable_thread_event_reporting): New.
(thread_db_detach): New.
(thread_db_mourn): New.
* server.h (struct thread_info) <last_resume_kind>: New field.
<attached>: Add comment.
<gdb_detached>: New field.
(handler_func): Change return type to int.
(handle_serial_event, handle_target_event): Ditto.
(gdb_connected): Declare.
(tracing): Delete.
(disconnected_tracing): Declare.
(stop_tracing): Declare.
* server.c (handle_query) <qSupported>: Report support for
disconnected tracing.
(queue_stop_reply_callback): Account for running threads.
(gdb_wants_thread_stopped): New.
(gdb_wants_all_threads_stopped): New.
(gdb_reattached_process): New.
(handle_status): Clear the `gdb_detached' flag of all processes.
In all-stop, stop all threads.
(main): Be sure to leave tfind mode. Handle disconnected tracing.
(process_serial_event): If the remote connection breaks, or if an
exit was forced with "monitor exit", force an event loop exit.
Handle disconnected tracing on detach.
(handle_serial_event): Adjust.
(handle_target_event): If GDB isn't connected, forward events back
to the inferior, unless the last process exited, in which case,
exit gdbserver. Adjust interface.
* remote-utils.c (remote_open): Don't block in accept. Instead
register an event loop source on the listen socket file
descriptor. Refactor bits into ...
(listen_desc): ... this new global.
(gdb_connected): ... this new function.
(enable_async_notification): ... this new function.
(handle_accept_event): ... this new function.
(remote_close): Clear remote_desc.
* inferiors.c (add_thread): Set the new thread's last_resume_kind.
* target.h (struct target_ops) <mourn, thread_stopped, pause_all>:
New fields.
(mourn_inferior): Define.
(target_process_qsupported): Avoid the dangling else problem.
(thread_stopped): Define.
(pause_all): Define.
(target_waitstatus_to_string): Declare.
* target.c (target_waitstatus_to_string): New.
* tracepoint.c (tracing): Make extern.
(disconnected_tracing): New.
(stop_tracing): Make extern. Handle tracing stops due to GDB
disconnecting.
(cmd_qtdisconnected): New.
(cmd_qtstatus): Report disconnected tracing status in trace reply.
(handle_tracepoint_general_set): Handle QTDisconnected.
* event-loop.c (event_handler_func): Change return type to int.
(process_event): Bail out if the event handler wants the event
loop to stop.
(handle_file_event): Ditto.
(start_event_loop): Bail out if the event handler wants the event
loop to stop.
* nto-low.c (nto_target_ops): Adjust.
* spu-low.c (spu_wait): Don't remove the process here.
(spu_target_ops): Adjust.
* win32-low.c (win32_wait): Don't remove the process here.
(win32_target_ops): Adjust.
Pedro Alves <pedro@codesourcery.com>
* target.h (struct target_ops) <supports_multi_process>: New
callback.
(target_supports_multi_process): New.
* server.c (handle_query): Even if GDB reports support, only
enable multi-process if the target also supports it. Report
multi-process support only if the target backend supports it.
* linux-low.c (linux_supports_multi_process): New function.
(linux_target_ops): Install it as target_supports_multi_process
callback.
Implement the multiprocess extensions, and add linux multiprocess
support.
* server.h (ULONGEST): Declare.
(struct ptid, ptid_t): New.
(minus_one_ptid, null_ptid): Declare.
(ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp)
(ptid_get_tid, ptid_equal, ptid_is_pid): Declare.
(struct inferior_list_entry): Change `id' type from unsigned from
to ptid_t.
(struct sym_cache, struct breakpoint, struct
process_info_private): Forward declare.
(struct process_info): Declare.
(current_process): Declare.
(all_processes): Declare.
(initialize_inferiors): Declare.
(add_thread): Adjust to use ptid_t.
(thread_id_to_gdb_id, thread_to_gdb_id, gdb_id_to_thread_id): Ditto.
(add_process, remove_process, find_thread_pid): Declare.
(find_inferior_id): Adjust to use ptid_t.
(cont_thread, general_thread, step_thread): Change type to ptid_t.
(multi_process): Declare.
(push_event): Adjust to use ptid_t.
(read_ptid, write_ptid): Declare.
(prepare_resume_reply): Adjust to use ptid_t.
(clear_symbol_cache): Declare.
* inferiors.c (all_processes): New.
(null_ptid, minus_one_ptid): New.
(ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp)
(ptid_get_tid, ptid_equal, ptid_is_pid): New.
(add_thread): Change unsigned long to ptid. Remove gdb_id
parameter. Adjust.
(thread_id_to_gdb_id, thread_to_gdb_id): Change unsigned long to ptid.
(gdb_id_to_thread): Rename to ...
(find_thread_pid): ... this. Change unsigned long to ptid.
(gdb_id_to_thread_id, find_inferior_id): Change unsigned long to ptid.
(loaded_dll, pull_pid_from_list): Adjust.
(add_process, remove_process, find_process_pid)
(get_thread_process, current_process, initialize_inferiors): New.
* target.h (struct thread_resume) <thread>: Change type to ptid_t.
(struct target_waitstatus) <related_pid>: Ditto.
(struct target_ops) <kill, detach>: Add `pid' argument. Change
return type to int.
(struct target_ops) <join>: Add `pid' argument.
(struct target_ops) <thread_alive>: Change pid's type to ptid_t.
(struct target_ops) <wait>: Add `ptid' field. Change return type
to ptid.
(kill_inferior, detach_inferior, join_inferior): Add `pid' argument.
(mywait): Add `ptid' argument. Change return type to ptid_t.
(target_pid_to_str): Declare.
* target.c (set_desired_inferior): Adjust to use ptids.
(mywait): Add new `ptid' argument. Adjust.
(target_pid_to_str): New.
* mem-break.h (free_all_breakpoints): Declare.
* mem-break.c (breakpoints): Delelete.
(set_breakpoint_at, delete_breakpoint, find_breakpoint_at)
(check_mem_read, check_mem_write, delete_all_breakpoints): Adjust
to use per-process breakpoint list.
(free_all_breakpoints): New.
* remote-utils.c (struct sym_cache) <name>: Drop `const'.
(symbol_cache, all_symbols_looked_up): Delete.
(hexchars): New.
(ishex, unpack_varlen_hex, write_ptid, hex_or_minus_one,
read_ptid): New.
(prepare_resume_reply): Change ptid argument's type from unsigned
long to ptid_t. Adjust. Implement W;process and X;process.
(free_sym_cache, clear_symbol_cache): New.
(look_up_one_symbol): Adjust to per-process symbol cache. *
* server.c (cont_thread, general_thread, step_thread): Change type
to ptid_t.
(attached): Delete.
(multi_process): New.
(last_ptid): Change type to ptid_t.
(struct vstop_notif) <ptid>: Change type to ptid_t.
(queue_stop_reply, push_event): Change `ptid' argument's type to
ptid_t.
(discard_queued_stop_replies): Add `pid' argument.
(start_inferior): Adjust to use ptids. Adjust to mywait interface
changes. Don't reference the `attached' global.
(attach_inferior): Adjust to mywait interface changes.
(handle_query): Adjust to use ptids. Parse GDB's qSupported
features. Handle and report "multiprocess+". Handle
"qAttached:PID".
(handle_v_cont): Adjust to use ptids. Adjust to mywait interface
changes.
(handle_v_kill): New.
(handle_v_stopped): Adjust to use target_pid_to_str.
(handle_v_requests): Allow multiple attaches and runs when
multiprocess extensions are in effect. Handle "vKill".
(myresume): Adjust to use ptids.
(queue_stop_reply_callback): Add `arg' parameter. Handle it.
(handle_status): Adjust to discard_queued_stop_replies interface
change.
(first_thread_of, kill_inferior_callback)
(detach_or_kill_inferior_callback, join_inferiors_callback): New.
(main): Call initialize_inferiors. Adjust to use ptids, killing
and detaching from all inferiors. Handle multiprocess packet
variants.
* linux-low.h: Include gdb_proc_service.h.
(struct process_info_private): New.
(struct linux_target_ops) <pid_of>: Use ptid_get_pid.
<lwpid_of>: Use ptid_get_lwp.
(get_lwp_thread): Adjust.
(struct lwp_info): Add `dead' member.
(find_lwp_pid): Declare.
* linux-low.c (thread_db_active): Delete.
(new_inferior): Adjust comment.
(inferior_pid): Delete.
(linux_add_process): New.
(handle_extended_wait): Adjust.
(add_lwp): Change unsigned long to ptid.
(linux_create_inferior): Add process to processes table. Adjust
to use ptids. Don't set new_inferior here.
(linux_attach_lwp): Rename to ...
(linux_attach_lwp_1): ... this. Add `initial' argument. Handle
it. Adjust to use ptids.
(linux_attach_lwp): New.
(linux_attach): Add process to processes table. Don't set
new_inferior here.
(struct counter): New.
(second_thread_of_pid_p, last_thread_of_process_p): New.
(linux_kill_one_lwp): Add `args' parameter. Handle it. Adjust to
multiple processes.
(linux_kill): Add `pid' argument. Handle it. Adjust to multiple
processes. Remove process from process table.
(linux_detach_one_lwp): Add `args' parameter. Handle it. Adjust
to multiple processes.
(any_thread_of): New.
(linux_detach): Add `pid' argument, and handle it. Remove process
from processes table.
(linux_join): Add `pid' argument. Handle it.
(linux_thread_alive): Change unsighed long argument to ptid_t.
Consider dead lwps as not being alive.
(status_pending_p): Rename `dummy' argument to `arg'. Filter out
threads we're not interested in.
(same_lwp, find_lwp_pid): New.
(linux_wait_for_lwp): Change `pid' argument's type from int to
ptid_t. Adjust.
(linux_wait_for_event): Rename to ...
(linux_wait_for_event_1): ... this. Change `pid' argument's type
from int to ptid_t. Adjust.
(linux_wait_for_event): New.
(linux_wait_1): Add `ptid' argument. Change return type to
ptid_t. Adjust. Use last_thread_of_process_p. Remove processes
that exit from the process table.
(linux_wait): Add `ptid' argument. Change return type to ptid_t.
Adjust.
(mark_lwp_dead): New.
(wait_for_sigstop): Adjust to use ptids. If a process exits while
stopping all threads, mark its main lwp as dead.
(linux_set_resume_request, linux_resume_one_thread): Adjust to use
ptids.
(fetch_register, usr_store_inferior_registers)
(regsets_fetch_inferior_registers)
(regsets_store_inferior_registers, linux_read_memory)
(linux_write_memory): Inline `inferior_pid'.
(linux_look_up_symbols): Adjust to use per-process
`thread_db_active'.
(linux_request_interrupt): Adjust to use ptids.
(linux_read_auxv): Inline `inferior_pid'.
(initialize_low): Don't reference thread_db_active.
* gdb_proc_service.h (struct ps_prochandle) <pid>: Remove.
* proc-service.c (ps_lgetregs): Use find_lwp_pid.
(ps_getpid): Return the pid of the current inferior.
* thread-db.c (proc_handle, thread_agent): Delete.
(thread_db_create_event, thread_db_enable_reporting): Adjust to
per-process data.
(find_one_thread): Change argument type to ptid_t. Adjust to
per-process data.
(maybe_attach_thread): Adjust to per-process data and ptids.
(thread_db_find_new_threads): Ditto.
(thread_db_init): Ditto.
* spu-low.c (spu_create_inferior, spu_attach): Add process to
processes table. Adjust to use ptids.
(spu_kill, spu_detach): Adjust interface. Remove process from
processes table.
(spu_join, spu_thread_alive): Adjust interface.
(spu_wait): Adjust interface. Remove process from processes
table. Adjust to use ptids.
* win32-low.c (current_inferior_tid): Delete.
(current_inferior_ptid): New.
(debug_event_ptid): New.
(thread_rec): Take a ptid. Adjust.
(child_add_thread): Add `pid' argument. Adjust to use ptids.
(child_delete_thread): Ditto.
(do_initial_child_stuff): Add `attached' argument. Add process to
processes table.
(child_fetch_inferior_registers, child_store_inferior_registers):
Adjust.
(win32_create_inferior): Pass 0 to do_initial_child_stuff.
(win32_attach): Pass 1 to do_initial_child_stuff.
(win32_kill): Adjust interface. Remove process from processes
table.
(win32_detach): Ditto.
(win32_join): Adjust interface.
(win32_thread_alive): Take a ptid.
(win32_resume): Adjust to use ptids.
(get_child_debug_event): Ditto.
(win32_wait): Adjust interface. Remove exiting process from
processes table.
* server.h (non_stop): Declare.
(gdb_client_data, handler_func): Declare.
(delete_file_handler, add_file_handler, start_event_loop):
Declare.
(handle_serial_event, handle_target_event, push_event)
(putpkt_notif): Declare.
* target.h (enum resume_kind): New.
(struct thread_resume): Replace `step' field by `kind' field.
(TARGET_WNOHANG): Define.
(struct target_ops) <wait>: Add `options' argument.
<supports_non_stop, async, start_non_stop>: New fields.
(target_supports_non_stop, target_async): New.
(start_non_stop): Declare.
(mywait): Add `options' argument.
* target.c (mywait): Add `options' argument. Print child exit
notifications here.
(start_non_stop): New.
* server.c (non_stop, own_buf, mem_buf): New globals.
(struct vstop_notif): New.
(notif_queue): New global.
(queue_stop_reply, push_event, discard_queued_stop_replies)
(send_next_stop_reply): New.
(start_inferior): Adjust to use resume_kind. Adjust to mywait
interface changes.
(attach_inferior): In non-stop mode, don't wait for the target
here.
(handle_general_set): Handle QNonStop.
(handle_query): When handling qC, return the current general
thread, instead of the first thread of the list.
(handle_query): If the backend supports non-stop mode, include
QNonStop+ in the qSupported query response.
(handle_v_cont): Adjust to use resume_kind. Handle resume_stop
and non-stop mode.
(handle_v_attach, handle_v_run): Handle non-stop mode.
(handle_v_stopped): New.
(handle_v_requests): Report support for vCont;t. Handle vStopped.
(myresume): Adjust to use resume_kind. Handle non-stop.
(queue_stop_reply_callback): New.
(handle_status): Handle non-stop mode.
(main): Clear non_stop flag on reconnection. Use the event-loop.
Refactor serial protocol handling from here ...
(process_serial_event): ... to this new function. When GDB
selects any thread, select one here. In non-stop mode, wait until
GDB acks all pending events before exiting.
(handle_serial_event, handle_target_event): New.
* remote-utils.c (remote_open): Install remote_desc in the event
loop.
(remote_close): Remove remote_desc from the event loop.
(putpkt_binary): Rename to...
(putpkt_binary_1): ... this. Add `is_notic' argument. Handle it.
(putpkt_binary): New as wrapper around putpkt_binary_1.
(putpkt_notif): New.
(prepare_resume_reply): In non-stop mode, don't change the
general_thread.
* event-loop.c: New.
* Makefile.in (OBJ): Add event-loop.o.
(event-loop.o): New rule.
* linux-low.h (pid_of): Moved here.
(lwpid_of): New.
(get_lwp_thread): Use lwpid_of.
(struct lwp_info): Delete `lwpid' field. Add `suspended' field.
* linux-low.c (pid_of): Delete.
(inferior_pid): Use lwpid_of.
(linux_event_pipe): New.
(target_is_async_p): New.
(delete_lwp): New.
(handle_extended_wait): Use lwpid_of.
(add_lwp): Don't set lwpid field.
(linux_attach_lwp): Adjust debug output. Use lwpid_of.
(linux_kill_one_lwp): If killing a running lwp, stop it first.
Use lwpid_of. Adjust to linux_wait_for_event interface changes.
(linux_detach_one_lwp): If detaching from a running lwp, stop it
first. Adjust to linux_wait_for_event interface changes. Use
lwpid_of.
(linux_detach): Don't delete the main lwp here.
(linux_join): Use my_waitpid. Avoid signal_pid. Use lwpid_of.
(status_pending_p): Don't consider explicitly suspended lwps.
(linux_wait_for_lwp): Take an integer pid instead of a lwp_info
pointer. Add OPTIONS argument. Change return type to int. Use
my_waitpid instead of sleeping. Handle WNOHANG. Use lwpid_of.
(linux_wait_for_event): Take an integer pid instead of a lwp_info
pointer. Add status pointer argument. Return a pid instead of a
status. Use lwpid_of. Adjust to linux_wait_for_lwp interface
changes. In non-stop mode, don't switch to a random thread.
(linux_wait): Rename to...
(linux_wait_1): ... this. Add target_options argument, and handle
it. Adjust to use resume_kind. Use lwpid_of. In non-stop mode,
don't handle the continue thread. Handle TARGET_WNOHANG. Merge
clean exit and signal exit code. Don't stop all threads in
non-stop mode. In all-stop mode, only stop all threads when
reporting a stop to GDB. Handle explicit thread stop requests.
(async_file_flush, async_file_mark): New.
(linux_wait): New.
(send_sigstop): Use lwpid_of.
(wait_for_sigstop): Use lwpid_of. Adjust to linux_wait_for_event
interface changes. In non-stop mode, don't switch to a random
thread.
(linux_resume_one_lwp): Use lwpid_of.
(linux_continue_one_thread, linux_queue_one_thread): Merge into ...
(linux_resume_one_thread): ... this. Handle resume_stop. In
non-stop mode, don't look for pending flag in all threads.
(resume_status_pending_p): Don't consider explicitly suspended
threads.
(my_waitpid): Reimplement. Emulate __WALL.
(linux_request_interrupt, linux_read_offsets, linux_xfer_siginfo):
Use lwpid_of.
(sigchld_handler, linux_supports_non_stop, linux_async)
(linux_start_non_stop): New.
(linux_target_ops): Register linux_supports_non_stop, linux_async
and linux_start_non_stop.
(initialize_low): Install SIGCHLD handler.
* thread-db.c (thread_db_create_event, find_one_thread)
(thread_db_get_tls_address): Use lwpid_of.
* win32-low.c (win32_detach): Adjust to use resume_kind.
(win32_wait): Add `options' argument.
* spu-low.c (spu_resume): Adjust to use resume_kind.
(spu_wait): Add `options' argument.
* target.h (enum target_waitkind): New.
(struct target_waitstatus): New.
(struct target_ops) <wait>: Return an unsigned long. Take a
target_waitstatus pointer instead of a char pointer.
(mywait): Likewise.
* target.c (mywait): Change prototype to return an unsigned long.
Take a target_waitstatus pointer instead of a char pointer. Adjust.
* server.h (thread_from_wait, old_thread_from_wait): Delete
declarations.
(prepare_resume_reply): Change prototype to take a
target_waitstatus.
* server.c (thread_from_wait, old_thread_from_wait): Delete.
(last_status, last_ptid): New.
(start_inferior): Remove "statusptr" argument. Adjust. Return a
pid instead of a signal.
(attach_inferior): Remove "status" and "signal" parameters.
Adjust.
(handle_query): For qGetTLSAddr, parse the thread id with strtol,
not as an address.
(handle_v_cont, handle_v_attach, handle_v_run, handle_v_kill)
(handle_v_requests, myresume): Remove "status" and "signal"
parameters. Adjust.
(handle_status): New.
(main): Delete local `status'. Adjust.
* remote-utils.c: Include target.h.
(prepare_resume_reply): Change prototype to take a
target_waitstatus. Adjust.
* linux-low.c (linux_wait): Adjust to new target_ops->wait
interface.
* spu-low.c (spu_wait): Adjust.
* win32-low.c (enum target_waitkind, struct target_waitstatus):
Delete.
(win32_wait): Adjust.
(struct target_ops): Add a `n' argument to the `resume' callback.
* server.c (start_inferior): Adjust.
(handle_v_cont, myresume): Adjust.
* linux-low.c (check_removed_breakpoint): Adjust to resume
interface change, and to removed leave_stopped field.
(resume_ptr): Delete.
(struct thread_resume_array): New.
(linux_set_resume_request): Add new `arg' parameter. Adjust to
resume interface change.
(linux_continue_one_thread, linux_queue_one_thread)
(resume_status_pending_p): Check if the resume field is NULL
instead of checking the leave_stopped member.
(linux_resume): Adjust to the target resume interface change.
* spu-low.c (spu_resume): Adjust to the target resume interface
change.
* win32-low.c (win32_detach, win32_resume): Ditto.
* configure.tgt: Build gdbserver for Cygwin and mingw32.
gdb/gdbserver/
* configure.ac: Check for more headers which are missing on
Windows. Automatically supply -lwsock32 and USE_WIN32API.
* configure.srv: Add Cygwin and mingw32.
* remote-utils.c: Don't include headers unconditionally which
are missing on mingw32. Include <winsock.h> for mingw32.
(remote_open): Adjust for mingw32 support. Flush
standard error after writing to it.
(remote_close, putpkt_binary, input_interrupt, block_async_io)
(unblock_async_io, enable_async_io, disable_async_io)
(readchar, getpkt): Update for Winsock support.
(prepare_resume_reply): Expect a protocol signal number.
* server.c: Disable <sys/wait.h> on mingw32.
(start_inferior): Adjust for mingw32 support. Flush
standard error after writing to it.
(attach_inferior): Likewise. Use protocol signal
numbers.
(main): Skip 'D' packet on mingw32. Use protocol signal numbers
and names.
* win32-i386-low.c: New file.
* Makefile.in (XM_CLIBS): Set.
(gdbserver, gdbreplay): Use $(INTERNAL_CFLAGS).
(win32-i386-low.o): New dependency rule.
* linux-low.c (linux_wait): Use target signal numbers.
* target.h (struct target_ops): Doc fix.
* server.h (target_signal_to_name): New prototype.
* gdbreplay.c: Don't include headers unconditionally which
are missing on mingw32. Include <winsock.h> for mingw32.
(remote_close, remote_open): Adjust for Winsock support.
* configure, config.in: Regenerated.
Take unsigned long arguments for PIDs.
* linux-low.c (add_process, linux_attach_lwp, linux_attach)
(linux_thread_alive, linux_wait_for_event, kill_lwp, send_sigstop)
(wait_for_sigstop, linux_resume_one_process)
(regsets_fetch_inferior_registers, linux_send_signal)
(linux_read_auxv): Likewise. Update the types of variables holding
PIDs. Update format string specifiers.
* linux-low.h (struct process_info, linux_attach_lwp): Likewise.
* remote-utils.c (prepare_resume_reply): Likewise.
* server.c (cont_thread, general_thread, step_thread)
(thread_from_wait, old_thread_from_wait, signal_pid): Change type to
unsigned long.
(handle_query): Update format specifiers.
(handle_v_cont, main): Use strtoul for thread IDs.
* server.h (struct inferior_list_entry): Use unsigned long for ID.
(add_thread, find_inferior_id, change_inferior_id, cont_thread)
(general_thread, step_thread, thread_from_wait)
(old_thread_from_wait): Update.
* target.h (struct thread_resume): Use unsigned long for THREAD.
(struct target_ops): Use unsigned long for arguments to attach and
thread_alive.
int. Check for and return error from ptrace().
* target.c (read_inferior_memory): Change return type to int. Pass
back return status from the_target->read_memory().
* target.h (struct target_ops): Adapt *read_memory() prototype.
Update comment.
(read_inferior_memory): Adapt prototype.
* server.c (main): Return an error packet if
read_inferior_memory() returns an error.
* target.h (struct target_ops): New member `read_auxv'.
* server.c (handle_query): Handle qPart:auxv:read: query using that.
* linux-low.c (linux_read_auxv): New function.
(linux_target_ops): Initialize `read_auxv' member to that.
the new PID.
(unstopped_p, linux_signal_pid): Remove.
(linux_target_ops): Remove linux_signal_pid.
* remote-utils.c (putpkt, input_interrupt): Use signal_pid
global instead of target method.
* target.h (struct target_ops): Remove signal_pid. Update comment
for create_inferior.
* server.c (signal_pid): New variable.
(create_inferior): Set signal_pid. Block SIGTTOU and SIGTTIN in
gdbserver. Set the child to be the foreground process group.
(attach_inferior): Set signal_pid.
* gdbserver/thread-db.c: New file.
* gdbserver/proc-service.c: New file.
* gdbserver/acinclude.m4: New file.
* gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h,
proc-service.o, and thread-db.o.
(linux-low.o): Add USE_THREAD_DB.
* gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T,
HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN.
* gdbserver/aclocal.m4: Regenerated.
* gdbserver/config.in: Regenerated.
* gdbserver/configure: Regenerated.
* gdbserver/configure.in: Check for proc_service.h, sys/procfs.h,
thread_db.h, and linux/elf.h headrs.
Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and
PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB.
Check for -lthread_db and thread support.
* gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS,
PowerPC, and SuperH.
* gdbserver/i387-fp.c: Constify arguments.
* gdbserver/i387-fp.h: Likewise.
* gdbserver/inferiors.c: (struct thread_info): Renamed from
`struct inferior_info'. Remove PID member. Use generic inferior
list header. All uses updated.
(inferiors, signal_pid): Removed.
(all_threads): New variable.
(get_thread): Define.
(add_inferior_to_list): New function.
(for_each_inferior): New function.
(change_inferior_id): New function.
(add_inferior): Removed.
(remove_inferior): New function.
(add_thread): New function.
(free_one_thread): New function.
(remove_thread): New function.
(clear_inferiors): Use for_each_inferior and free_one_thread.
(find_inferior): New function.
(find_inferior_id): New function.
(inferior_target_data): Update argument type.
(set_inferior_target_data): Likewise.
(inferior_regcache_data): Likewise.
(set_inferior_regcache_data): Likewise.
* gdbserver/linux-low.c (linux_bp_reinsert): Remove.
(all_processes, stopping_threads, using_thrads)
(struct pending_signals, debug_threads, pid_of): New.
(inferior_pid): Replace with macro.
(struct inferior_linux_data): Remove.
(get_stop_pc, add_process): New functions.
(linux_create_inferior): Restore SIGRTMIN+1 before calling exec.
Use add_process and add_thread.
(linux_attach_lwp): New function, based on old linux_attach. Use
add_process and add_thread. Set stop_expected for new threads.
(linux_attach): New function.
(linux_kill_one_process): New function.
(linux_kill): Kill all LWPs.
(linux_thread_alive): Use find_inferior_id.
(check_removed_breakpoints, status_pending_p): New functions.
(linux_wait_for_process): Renamed from linux_wait_for_one_inferior.
Update. Use WNOHANG. Wait for cloned processes also. Update process
struct for the found process.
(linux_wait_for_event): New function.
(linux_wait): Use it. Support LWPs.
(send_sigstop, wait_for_sigstop, stop_all_processes)
(linux_resume_one_process, linux_continue_one_process): New functions.
(linux_resume): Support LWPs.
(REGISTER_RAW_SIZE): Remove.
(fetch_register): Use register_size instead. Call supply_register.
(usr_store_inferior_registers): Likewise. Call collect_register.
Fix recursive case.
(regsets_fetch_inferior_registers): Improve error message.
(regsets_store_inferior_registers): Add debugging.
(linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB.
(unstopped_p, linux_signal_pid): New functions.
(linux_target_ops): Add linux_signal_pid.
(linux_init_signals): New function.
(initialize_low): Call it. Initialize using_threads.
* gdbserver/regcache.c (inferior_regcache_data): Add valid
flag.
(get_regcache): Fetch registers lazily. Add fetch argument
and update all callers.
(regcache_invalidate_one, regcache_invalidate): New
functions.
(new_register_cache): Renamed from create_register_cache.
Return the new regcache.
(free_register_cache): Change argument to a void *.
(registers_to_string, registers_from_string): Call get_regcache
with fetch flag set.
(register_data): Make static. Pass fetch flag to get_regcache.
(supply_register): Call get_regcache with fetch flag clear.
(collect_register): Call get_regcache with fetch flag set.
(collect_register_as_string): New function.
* gdbserver/regcache.h: Update.
* gdbserver/remote-utils.c (putpkt): Flush after debug output and use
stderr.
Handle input interrupts while waiting for an ACK.
(input_interrupt): Use signal_pid method.
(getpkt): Flush after debug output and use stderr.
(outreg): Use collect_register_as_string.
(new_thread_notify, dead_thread_notify): New functions.
(prepare_resume_reply): Check using_threads. Set thread_from_wait
and general_thread.
(look_up_one_symbol): Flush after debug output.
* gdbserver/server.c (step_thread, server_waiting): New variables.
(start_inferior): Don't use signal_pid. Update call to mywait.
(attach_inferior): Update call to mywait.
(handle_query): Handle qfThreadInfo and qsThreadInfo.
(main): Don't fetch/store registers explicitly. Use
set_desired_inferior. Support proposed ``Hs'' packet. Update
calls to mywait.
* gdbserver/server.h: Update.
(struct inferior_list, struct_inferior_list_entry): New.
* gdbserver/target.c (set_desired_inferior): New.
(write_inferior_memory): Constify.
(mywait): New function.
* gdbserver/target.h: Update.
(struct target_ops): New signal_pid method.
(mywait): Removed macro, added prototype.
* gdbserver/linux-low.h (regset_func): Removed.
(regset_fill_func, regset_store_func): New.
(enum regset_type): New.
(struct regset_info): Add type field. Use new operation types.
(struct linux_target_ops): stop_pc renamed to get_pc.
Add decr_pc_after_break and breakpoint_at.
(get_process, get_thread_proess, get_process_thread)
(strut process_info, all_processes, linux_attach_lwp)
(thread_db_init): New.
* gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc,
arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset)
(i386_store_fpxregset): Constify.
(target_regsets): Add new kind identifier.
(i386_get_pc): Renamed from i386_stop_pc. Simplify.
(i386_set_pc): Add debugging.
(i386_breakpoint_at): New function.
(the_low_target): Add new members.
* gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc)
(mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr)
(mips_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc)
(ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc)
(sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-x86-64-low.c (target_regsets): Add new kind
identifier.
Pedro Alves
Jan Kratochvil
Pierre Muller
H.J. Lu
Vladimir Prus
Joel Brobecker
Paul Pluzhnikov
Aleksandar Ristovski
Ulrich Weigand
Daniel Jacobowitz
Nathan Sidwell
Eli Zaretskii
Orjan Friberg
Roland McGrath