bfd/
2013-11-27 Tristan Gingold <gingold@adacore.com>
* pei-x86_64.c (pex_regs): Make it const. Add comments.
(pex64_get_runtime_function): Do not split UnwindData.
(pex64_get_unwind_info): Extract the chain and the handler.
(pex64_xdata_print_uwd_codes): Rewritten: do not reverse print
the opcode, handle version 2, add consistency check, make the
code host neutral.
(pex64_dump_xdata): Change arguments to pass the section and its
content. Handle version 2, change output.
(pex64_bfd_print_pdata): Add comments, load section for xdata.
Avoid duplicate outputs.
include/coff
2013-11-27 Tristan Gingold <gingold@adacore.com>
* pe.h (struct pex64_runtime_function): Remove isChained.
(UWOP_SAVE_XMM): Add comment.
(struct pex64_unwind_info): Remove extra fields.
2013-11-27 Matthew Fortune <matthew.fortune@imgtec.com>
* binutils-all/objcopy.exp: Consider mips-mti-elf the same as
mips-sde-elf
* binutils-all/readelf.exp: Likewise
gas/testsuite/
2013-11-27 Matthew Fortune <matthew.fortune@imgtec.com>
* gas/mips/mips.exp: Consider mips-mti-elf the same as mips-sde-elf
ld/testsuite/
2013-11-27 Matthew Fortune <matthew.fortune@imgtec.com>
* ld-mips-elf/mips-elf.exp: Consider mips-mti-elf the same as
mips-sde-elf
libiberty/
PR other/59195
* cp-demangle.c (struct d_info_checkpoint): New struct.
(struct d_print_info): Add current_template field.
(d_operator_name): Set flag when processing a conversion
operator.
(cplus_demangle_type): When processing <template-args> for
a conversion operator, backtrack if necessary.
(d_expression_1): Renamed from d_expression.
(d_expression): New wrapper around d_expression_1.
(d_checkpoint): New function.
(d_backtrack): New function.
(d_print_init): Initialize current_template.
(d_print_comp): Set current_template.
(d_print_cast): Put current_template in scope for
printing conversion operator name.
(cplus_demangle_init_info): Initialize is_expression and
is_conversion.
* cp-demangle.h (struct d_info): Add is_expression and
is_conversion fields.
* testsuite/demangle-expected: New test cases.
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@205292 138bc75d-0d04-0410-961f-82ee72b054a4
If a value is entirely optimized out, then there's nothing for
value_fetch_lazy to fetch. Sequences like:
if (value_lazy (retval))
value_fetch_lazy (retval);
End up allocating the value contents buffer, wasting memory, for no
use.
gdb/ChangeLog
2013-11-26 Andrew Burgess <aburgess@broadcom.com>
* value.c (allocate_optimized_out_value): Mark value as non-lazy.
The code for handling GOT references to ifunc symbols in static links
was missing.
bfd/ChangeLog:
2013-11-26 Will Newton <will.newton@linaro.org>
* elfnn-aarch64.c (elfNN_aarch64_finish_dynamic_symbol):
Handle STT_GNU_IFUNC symbols correctly in static links.
ld/testsuite/ChangeLog:
2013-11-26 Will Newton <will.newton@linaro.org>
* ld-aarch64/aarch64-elf.exp: Add ifunc-22.
* ld-aarch64/ifunc-22.d: New file.
* ld-aarch64/ifunc-22.s: Likewise.
The .got.plt header size was not being correctly taken into account
when calculating the offset for relocations against ifunc symbols.
bfd/ChangeLog:
2013-11-26 Will Newton <will.newton@linaro.org>
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Ensure
PLT_INDEX is calculated using correct header size.
ld/testsuite/ChangeLog:
2013-11-26 Will Newton <will.newton@linaro.org>
* ld-aarch64/aarch64-elf.exp: Add ifunc-21 test.
* ld-aarch64/ifunc-21.d: New file.
* ld-aarch64/ifunc-21.s: Likewise.
This reverts da2b2fdf57 and some
follow-up patches. They were incorrect.
2013-11-26 Tom Tromey <tromey@redhat.com>
* dwarf2-frame.c (dwarf2_frame_cache): Revert patch from
2013-11-22.
2013-11-26 Tom Tromey <tromey@redhat.com>
* gdb.dwarf2/dw2-unspecified-ret-addr.S: Remove.
* gdb.dwarf2/dw2-unspecified-ret-addr.c: Remove.
* gdb.dwarf2/dw2-unspecified-ret-addr.exp: Remove.
The MPX patch has broken the I386_XSTATE_SIZE macro. For AVX machines,
it ends up returning I386_XSTATE_SSE_SIZE. Where it first reads
I386_XSTATE_AVX_SIZE, it should have read I386_XSTATE_AVX:
#define I386_XSTATE_SIZE(XCR0) \
(((XCR0) & I386_XSTATE_BNDCFG) != 0 ? I386_XSTATE_BNDCFG_SIZE \
: (((XCR0) & I386_XSTATE_BNDREGS) != 0 ? I386_XSTATE_BNDCFG_SIZE \
- : (((XCR0) & I386_XSTATE_AVX_SIZE) != 0 ? I386_XSTATE_AVX_SIZE \
+ : (((XCR0) & I386_XSTATE_AVX) != 0 ? I386_XSTATE_AVX_SIZE \
: I386_XSTATE_SSE_SIZE)))
The patch goes a step further and improves readability of the macro,
by adding a couple other auxiliary macros.
2013-11-26 Walfred Tedeschi <walfred.tedeschi@intel.com>
* i386-xstate.h (I386_XSTATE_MPX): New Macro.
(I386_XSTATE_MPX_MASK): Makes use of I386_XSTATE_MPX.
(HAS_MPX): New macro.
(HAS_AVX): New macro.
(I386_XSTATE_SIZE): Uses HAS_MPX and HAS_AVX.
This patch teaches "disassembly" use code cache mechanism to read
target code.
gdb:
2013-11-24 Yao Qi <yao@codesourcery.com>
* disasm.c (dis_asm_read_memory): Call target_read_code
instead of target_read_memory.
Similar to stack cache, in this patch, we add
TARGET_OBJECT_CODE_MEMORY to read code from target and add a new
option "set code-cache on|off" to optimize code accesses by
using the target memory cache.
In V4:
- Remove "without affecting correctness" from NEWS and doc.
- Replace "ON" with "on" in doc.
- "access" -> "accesses".
In V3:
- Rename functions and variables.
- Update command help, doc and NEWS entry.
- Invalidate cache on option transitions, to align with
the behaviour of "stack-cache". Since cache invalidation is
transparent to users, users don't know option "stack-cache"
transitions cause code cache invalidation.
V2 was reviewed by Doug. There are some changes in V3, so I post it
here.
gdb:
2013-11-24 Yao Qi <yao@codesourcery.com>
* NEWS: Add note on new "set code-cache" option.
* target-dcache.c (code_cache_enabled_1): New variable.
(code_cache_enabled): New variable.
(show_code_cache, set_code_cache): New function.
(code_cache_enabled_p): New function.
(_initialize_target_dcache): Register command.
* target-dcache.h (code_cache_enabled_p): Declare.
* target.c (memory_xfer_partial_1):Handle
TARGET_OBJECT_CODE_MEMORY and code_cache_enabled.
(target_read_code): New function.
* target.h (enum target_object) <TARGET_OBJECT_CODE_MEMORY>:
New.
(target_read_code): Declare.
gdb/doc:
2013-11-24 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (Caching Remote Data): Document new
"set/show stack-cache" option.
Hi,
This patch does some renamings on "stack-cache" related functions and
variables.
In the review to "code cache" series v2, we have some discussions on the
name of predicate function 'stack_cache_enabled', and have some options,
1 keep it unchanged, as it is already a predicate clearly,
2 rename it to stack_cache_enabled_p,
3 rename it to enable_stack_cache_p,
I choose #2, because 'stack_cache_enabled' is a predicate, but
it's better to add "_p" suffix to stress this. There are some other
similar patterns used in GDB source, such as unop_user_defined_p
and agent_loaded_p.
Then, I have to rename variable stack_cache_enabled_p to something
else. The option is "stack-cache", so I'd like to name the variable
associated with this command as "stack_cache". Similarly, the commands
associated with this command should be renamed to "set_stack_cache"
and "show_stack_cache" respectively.
gdb:
2013-11-24 Yao Qi <yao@codesourcery.com>
* target-dcache.c (stack_cache_enabled_p_1): Rename to ...
(stack_cache_enabled_1): ... this. New variable.
(stack_cache_enabled_p): Rename to ...
(stack_cache_enabled): ... this. New variable.
(set_stack_cache_enabled_p): Rename to ...
(set_stack_cache): ... this. Update caller.
(show_stack_cache_enabled_p): Rename to ...
(show_stack_cache): ... this. Update caller.
(stack_cache_enabled): Rename to ...
(stack_cache_enabled_p): ... this. Update caller.
(_initialize_target_dcache): Replace "data cache" with
"target memory cache".
* target-dcache.h (stack_cache_enabled): Remove declaration.
(stack_cache_enabled_p): Add declaration.
gdb/doc:
2013-11-24 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (Caching Target Data): Replace "ON" with "on".
(Maintenance Commands): Replace "ON" and "OFF" with "on" and
"off" respectively.
* gdb.python/py-value.exp (test_lazy_strings): Tweak test names.
(test_subscript_regression): Ditto.
(top level): Run test_subscript_regression for c++ with "c++" prefix.
* cli/cli-script.c (multi_line_command_p): New function.
(recurse_read_control_structure, read_command_lines_1): Call it.
(execute_control_command): Consistently have a blank line between
each case.
Hi,
When using command -var-list-children, "displayhint" appears in the result of
each child, shown as the following output.
-var-list-children ss1 ^M
^done,numchild="2",displayhint="pp_ss",children=[child={name="ss1.a",exp="a",numchild="0",type="struct s",thread-id="1",displayhint="pp_s",dynamic="1"},child={name="ss1.b",exp="b",numchild="0",type="struct s",thread-id="1",displayhint="pp_s",dynamic="1"}],has_more="0"
Current doc on command -var-list-children doesn't reflect this. This
patch is to fix it.
gdb/doc:
2013-11-23 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (GDB/MI Variable Objects): Add the description
of "displayhint" to the table about child results.
PR gdb/16196:
* valprint.c (read_string): Set new variable fetchlen based on
fetchlimit and size. Use it in call to partial_memory_read.
Update comment.
PR gdb/16196:
* valprint.c (read_string): Set new variable fetchlen based on
fetchlimit and size. Use it in call to partial_memory_read.
Update comment.
Pedro asked me to add a comment to dw2-bad-cfi.S explaining the nature
of the badness.
I'm checking this in.
2013-11-22 Tom Tromey <tromey@redhat.com>
* gdb.dwarf2/dw2-bad-cfi.S: Update comment.
Debugging PR 16155 further, I found that the DWARF unwinder found the
function in question, but thought it had no registers saved
(fs->regs.num_regs == 0).
It seems to me that if a frame does not specify the return address
column, or if the return address column is explicitly marked as
DWARF2_FRAME_REG_UNSPECIFIED, then we should set the
"undefined_retaddr" flag and let the DWARF unwinder gracefully stop.
This patch implements that idea.
With this patch the backtrace works properly:
(gdb) bt
#0 0x0000007fb7ed485c in nanosleep () from /lib64/libc.so.6
#1 0x0000007fb7ed4508 in sleep () from /lib64/libc.so.6
#2 0x00000000004008bc in thread_function (arg=0x4) at threadapply.c:73
#3 0x0000007fb7fad950 in start_thread () from /lib64/libpthread.so.0
#4 0x0000007fb7f0956c in clone () from /lib64/libc.so.6
2013-11-22 Tom Tromey <tromey@redhat.com>
PR backtrace/16155:
* dwarf2-frame.c (dwarf2_frame_cache): Set undefined_retaddr if
the return address column is unspecified.
2013-11-22 Tom Tromey <tromey@redhat.com>
* gdb.dwarf2/dw2-bad-cfi.c: New file.
* gdb.dwarf2/dw2-bad-cfi.exp: New file.
* gdb.dwarf2/dw2-bad-cfi.S: New file.
If value_fetch_lazy loops infinitely while unwrapping lval_register
values, it means we either somehow ended up with two frames with the
same ID in the frame chain, or some code is trying to unwind behind
get_prev_frame's back (e.g., a frame unwind sniffer trying to unwind).
In any case, it should always be an internal error to end up in this
situation.
This patch adds a check and throws an internal error if the same frame
is returned.
2013-11-22 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
PR backtrace/16155
* value.c (value_fetch_lazy): Internal error if
get_frame_register_value returns the same register.
output deterministic. time.h include is no longer needed.
* resres.c (res_append_resource): Likewise.
* pe-dll.c (fill_edata): Only use a real timestamp if
--insert-timestamp was used.
* emultempl/pe.em: Add the --insert-timestamp option.
* emultempl/pep.em: Likewise for 64bit.
* ld.texinfo: Document the --insert-timestamp option.
* libcoff-in.h: Add insert_timestamp flag to the pe_data struct.
* libcoff.h: Regenerate.
* peXXigen.c (_bfd_XXi_only_swap_filehdr_out): Only use a real
timestamp if --insert-timestamp was used.
Given we already have the frame id stash, which holds the ids of all
frames in the chain, detecting corrupted stacks with wide stack cycles
with non-consecutive dup frame ids is just as cheap as just detecting
cycles in consecutive frames:
#0 frame_id1
#1 frame_id2
#2 frame_id3
#3 frame_id1
#4 frame_id2
#5 frame_id3
#6 frame_id1
... forever ...
We just need to check whether the stash already knows about a given
frame id instead of comparing the ids of the previous/this frames.
Tested on x86_64 Fedora 17.
gdb/
2013-11-22 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
* frame.c (frame_stash_add): Now returns whether a frame with the
same ID was already known.
(compute_frame_id): New function, factored out from get_frame_id.
(get_frame_id): No longer lazilly compute the frame id here.
(get_prev_frame_if_no_cycle): New function. Detects wider stack
cycles.
(get_prev_frame_1): Use it instead of get_prev_frame_raw directly,
and checking for stack cycles here.
The UNWIND_SAME_ID check is done between THIS_FRAME and the next frame
when we go try to unwind the previous frame. But at this point, it's
already too late -- we ended up with two frames with the same ID in
the frame chain. Each frame having its own ID is an invariant assumed
throughout GDB. This patch applies the UNWIND_SAME_ID detection
earlier, right after the previous frame is unwound, discarding the dup
frame if a cycle is detected.
The patch includes a new test that fails before the change. Before
the patch, the test causes an infinite loop in GDB, after the patch,
the UNWIND_SAME_ID logic kicks in and makes the backtrace stop with:
Backtrace stopped: previous frame identical to this frame (corrupt stack?)
The test uses dwarf CFI to emulate a corrupted stack with a cycle. It
has a function with registers marked DW_CFA_same_value (most
importantly RSP/RIP), so that GDB computes the same ID for that frame
and its caller. IOW, something like this:
#0 - frame_id_1
#1 - frame_id_2
#2 - frame_id_3
#3 - frame_id_4
#4 - frame_id_4 <<<< outermost (UNWIND_SAME_ID).
(The test's code is just a copy of dw2-reg-undefined.S /
dw2-reg-undefined.c, adjusted to use DW_CFA_same_value instead of
DW_CFA_undefined, and to mark a different set of registers.)
The infinite loop is here, in value_fetch_lazy:
while (VALUE_LVAL (new_val) == lval_register && value_lazy (new_val))
{
frame = frame_find_by_id (VALUE_FRAME_ID (new_val));
...
new_val = get_frame_register_value (frame, regnum);
}
get_frame_register_value can return a lazy register value pointing to
the next frame. This means that the register wasn't clobbered by
FRAME; the debugger should therefore retrieve its value from the next
frame.
To be clear, get_frame_register_value unwinds the value in question
from the next frame:
struct value *
get_frame_register_value (struct frame_info *frame, int regnum)
{
return frame_unwind_register_value (frame->next, regnum);
^^^^^^^^^^^
}
In other words, if we get a lazy lval_register, it should have the
frame ID of the _next_ frame, never of FRAME.
At this point in value_fetch_lazy, the whole relevant chunk of the
stack up to frame #4 has already been unwound. The loop always
"unlazies" lval_registers in the "next/innermost" direction, not in
the "prev/unwind further/outermost" direction.
So say we're looking at frame #4. get_frame_register_value in frame
#4 can return a lazy register value of frame #3. So the next
iteration, frame_find_by_id tries to read the register from frame #3.
But, since frame #4 happens to have same id as frame #3,
frame_find_by_id returns frame #4 instead. Rinse, repeat, and we have
an infinite loop.
This is an old latent problem, exposed by the recent addition of the
frame stash. Before we had a stash, frame_find_by_id(frame_id_4)
would walk over all frames starting at the current frame, and would
always find #3 first. The stash happens to return #4 instead:
struct frame_info *
frame_find_by_id (struct frame_id id)
{
struct frame_info *frame, *prev_frame;
...
/* Try using the frame stash first. Finding it there removes the need
to perform the search by looping over all frames, which can be very
CPU-intensive if the number of frames is very high (the loop is O(n)
and get_prev_frame performs a series of checks that are relatively
expensive). This optimization is particularly useful when this function
is called from another function (such as value_fetch_lazy, case
VALUE_LVAL (val) == lval_register) which already loops over all frames,
making the overall behavior O(n^2). */
frame = frame_stash_find (id);
if (frame)
return frame;
for (frame = get_current_frame (); ; frame = prev_frame)
{
gdb/
2013-11-22 Pedro Alves <palves@redhat.com>
PR 16155
* frame.c (get_prev_frame_1): Do the UNWIND_SAME_ID check between
this frame and the new previous frame, not between this frame and
the next frame.
gdb/testsuite/
2013-11-22 Pedro Alves <palves@redhat.com>
PR 16155
* gdb.dwarf2/dw2-dup-frame.S: New file.
* gdb.dwarf2/dw2-dup-frame.c: New file.
* gdb.dwarf2/dw2-dup-frame.exp: New file.
Two rationales, same patch.
TL;DR 1:
dwarf2_frame_cache recursion is evil. dwarf2_frame_cache calls
dwarf2_tailcall_sniffer_first which then recurses into
dwarf2_frame_cache.
TL;DR 2:
An unwinder trying to unwind is evil. dwarf2_frame_sniffer calls
dwarf2_frame_cache which calls dwarf2_tailcall_sniffer_first which
then tries to unwind the PC of the previous frame.
Avoid all that by deferring dwarf2_tailcall_sniffer_first until it's
really necessary.
Rationale 1
===========
A frame sniffer should not try to unwind, because that bypasses all
the validation checks done by get_prev_frame. The UNWIND_SAME_ID
scenario is one such case where GDB is currently broken because (in
part) of this (the next patch adds a test that would fail without
this).
GDB goes into an infinite loop in value_fetch_lazy, here:
while (VALUE_LVAL (new_val) == lval_register && value_lazy (new_val))
{
frame = frame_find_by_id (VALUE_FRAME_ID (new_val));
...
new_val = get_frame_register_value (frame, regnum);
}
(top-gdb) bt
#0 value_fetch_lazy (val=0x11516d0) at ../../src/gdb/value.c:3510
#1 0x0000000000584bd8 in value_optimized_out (value=0x11516d0) at ../../src/gdb/value.c:1096
#2 0x00000000006fe7a1 in frame_register_unwind (frame=0x1492600, regnum=16, optimizedp=0x7fffffffcdec, unavailablep=0x7fffffffcde8, lvalp=0x7fffffffcdd8, addrp=
0x7fffffffcde0, realnump=0x7fffffffcddc, bufferp=0x7fffffffce10 "@\316\377\377\377\177") at ../../src/gdb/frame.c:940
#3 0x00000000006fea3a in frame_unwind_register (frame=0x1492600, regnum=16, buf=0x7fffffffce10 "@\316\377\377\377\177") at ../../src/gdb/frame.c:990
#4 0x0000000000473b9b in i386_unwind_pc (gdbarch=0xf54660, next_frame=0x1492600) at ../../src/gdb/i386-tdep.c:1771
#5 0x0000000000601dfa in gdbarch_unwind_pc (gdbarch=0xf54660, next_frame=0x1492600) at ../../src/gdb/gdbarch.c:2870
#6 0x0000000000693db5 in dwarf2_tailcall_sniffer_first (this_frame=0x1492600, tailcall_cachep=0x14926f0, entry_cfa_sp_offsetp=0x7fffffffcf00)
at ../../src/gdb/dwarf2-frame-tailcall.c:389
#7 0x0000000000690928 in dwarf2_frame_cache (this_frame=0x1492600, this_cache=0x1492618) at ../../src/gdb/dwarf2-frame.c:1245
#8 0x0000000000690f46 in dwarf2_frame_sniffer (self=0x8e4980, this_frame=0x1492600, this_cache=0x1492618) at ../../src/gdb/dwarf2-frame.c:1423
#9 0x000000000070203b in frame_unwind_find_by_frame (this_frame=0x1492600, this_cache=0x1492618) at ../../src/gdb/frame-unwind.c:112
#10 0x00000000006fd681 in get_frame_id (fi=0x1492600) at ../../src/gdb/frame.c:408
#11 0x00000000007006c2 in get_prev_frame_1 (this_frame=0xdc1860) at ../../src/gdb/frame.c:1826
#12 0x0000000000700b7a in get_prev_frame (this_frame=0xdc1860) at ../../src/gdb/frame.c:2056
#13 0x0000000000514588 in frame_info_to_frame_object (frame=0xdc1860) at ../../src/gdb/python/py-frame.c:322
#14 0x000000000051784c in bootstrap_python_frame_filters (frame=0xdc1860, frame_low=0, frame_high=-1) at ../../src/gdb/python/py-framefilter.c:1396
#15 0x0000000000517a6f in apply_frame_filter (frame=0xdc1860, flags=7, args_type=CLI_SCALAR_VALUES, out=0xed7a90, frame_low=0, frame_high=-1)
at ../../src/gdb/python/py-framefilter.c:1492
#16 0x00000000005e77b0 in backtrace_command_1 (count_exp=0x0, show_locals=0, no_filters=0, from_tty=1) at ../../src/gdb/stack.c:1777
#17 0x00000000005e7c0f in backtrace_command (arg=0x0, from_tty=1) at ../../src/gdb/stack.c:1891
#18 0x00000000004e37a7 in do_cfunc (c=0xda4fa0, args=0x0, from_tty=1) at ../../src/gdb/cli/cli-decode.c:107
#19 0x00000000004e683c in cmd_func (cmd=0xda4fa0, args=0x0, from_tty=1) at ../../src/gdb/cli/cli-decode.c:1882
#20 0x00000000006f35ed in execute_command (p=0xcc66c2 "", from_tty=1) at ../../src/gdb/top.c:468
#21 0x00000000005f8853 in command_handler (command=0xcc66c0 "bt") at ../../src/gdb/event-top.c:435
#22 0x00000000005f8e12 in command_line_handler (rl=0xfe05f0 "@") at ../../src/gdb/event-top.c:632
#23 0x000000000074d2c6 in rl_callback_read_char () at ../../src/readline/callback.c:220
#24 0x00000000005f8375 in rl_callback_read_char_wrapper (client_data=0x0) at ../../src/gdb/event-top.c:164
#25 0x00000000005f876a in stdin_event_handler (error=0, client_data=0x0) at ../../src/gdb/event-top.c:375
#26 0x00000000005f72fa in handle_file_event (data=...) at ../../src/gdb/event-loop.c:768
#27 0x00000000005f67a3 in process_event () at ../../src/gdb/event-loop.c:342
#28 0x00000000005f686a in gdb_do_one_event () at ../../src/gdb/event-loop.c:406
#29 0x00000000005f68bb in start_event_loop () at ../../src/gdb/event-loop.c:431
#30 0x00000000005f83a7 in cli_command_loop (data=0x0) at ../../src/gdb/event-top.c:179
#31 0x00000000005eeed3 in current_interp_command_loop () at ../../src/gdb/interps.c:327
#32 0x00000000005ef8ff in captured_command_loop (data=0x0) at ../../src/gdb/main.c:267
#33 0x00000000005ed2f6 in catch_errors (func=0x5ef8e4 <captured_command_loop>, func_args=0x0, errstring=0x8b6554 "", mask=RETURN_MASK_ALL)
at ../../src/gdb/exceptions.c:524
#34 0x00000000005f0d21 in captured_main (data=0x7fffffffd9e0) at ../../src/gdb/main.c:1067
#35 0x00000000005ed2f6 in catch_errors (func=0x5efb9b <captured_main>, func_args=0x7fffffffd9e0, errstring=0x8b6554 "", mask=RETURN_MASK_ALL)
at ../../src/gdb/exceptions.c:524
#36 0x00000000005f0d57 in gdb_main (args=0x7fffffffd9e0) at ../../src/gdb/main.c:1076
#37 0x000000000045bb6a in main (argc=4, argv=0x7fffffffdae8) at ../../src/gdb/gdb.c:34
(top-gdb)
GDB is trying to unwind the PC register of the previous frame (frame
#5 above), starting from the frame being sniffed (the THIS frame).
But the THIS frame's unwinder says the PC of the previous frame is
actually the same as the previous's frame's next frame (which is the
same frame we started with, the THIS frame), therefore it returns an
lval_register lazy value with frame set to THIS frame. And so the
value_fetch_lazy loop never ends.
Rationale 2
===========
As an experiment, I tried making dwarf2-frame.c:read_addr_from_reg use
address_from_register. That caused a bunch of regressions, but it
actually took me a long while to figure out what was going on. Turns
out dwarf2-frame.c:read_addr_from_reg is called while computing the
frame's CFA, from within dwarf2_frame_cache. address_from_register
wants to create a register with frame_id set to the frame being
constructed. To create the frame id, we again call dwarf2_frame_cache,
which given:
static struct dwarf2_frame_cache *
dwarf2_frame_cache (struct frame_info *this_frame, void **this_cache)
{
...
if (*this_cache)
return *this_cache;
returns an incomplete object to the caller:
static void
dwarf2_frame_this_id (struct frame_info *this_frame, void **this_cache,
struct frame_id *this_id)
{
struct dwarf2_frame_cache *cache =
dwarf2_frame_cache (this_frame, this_cache);
...
(*this_id) = frame_id_build (cache->cfa, get_frame_func (this_frame));
}
As cache->cfa is still 0 (we were trying to compute it!), and
get_frame_id recalls this id from here on, we end up with a broken
frame id in recorded for this frame. Later, when inspecting locals,
the dwarf machinery needs to know the selected frame's base, which
calls get_frame_base:
CORE_ADDR
get_frame_base (struct frame_info *fi)
{
return get_frame_id (fi).stack_addr;
}
which as seen above then returns 0 ...
So I gave up using address_from_register.
But, the pain of investigating this made me want to have GDB itself
assert that recursion never happens here. So I wrote a patch to do
that. But, it triggers on current mainline, because
dwarf2_tailcall_sniffer_first, called from dwarf2_frame_cache, unwinds
the this_frame.
A sniffer shouldn't be trying to unwind, exactly because of this sort
of tricky issue. The patch defers calling
dwarf2_tailcall_sniffer_first until it's really necessary, in
dwarf2_frame_prev_register (thus actually outside the sniffer path).
As this makes the call to dwarf2_frame_sniffer in dwarf2_frame_cache
unnecessary again, the patch removes that too.
Tested on x86_64 Fedora 17.
gdb/
2013-11-22 Pedro Alves <palves@redhat.com>
PR 16155
* dwarf2-frame.c (struct dwarf2_frame_cache)
<checked_tailcall_bottom, entry_cfa_sp_offset,
entry_cfa_sp_offset_p>: New fields.
(dwarf2_frame_cache): Adjust to use the new cache fields instead
of locals. Don't call dwarf2_tailcall_sniffer_first here.
(dwarf2_frame_prev_register): Call it here, but only once.
