This patch adds two gdbarch methods breakpoint_kind_from_pc and
sw_breakpoint_from_kind, and uses target_info.placed_size as "kind"
of the breakpoint. This patch updates the usages of
target_info.placed_size.
The "kind" of a breakpoint is determined by gdbarch rather than
target, so we have gdbarch method breakpoint_kind_from_pc, and we
should set target_info.placed_size out of each implementation of
target to_insert_breakpoint. In this way, each target doesn't have
to set target_info.placed_size any more.
This patch also sets target_info.placed_address before
target_insert_breakpoint too, so that target to_insert_breakpoint
can use it, see record_full_insert_breakpoint.
Before we call target_insert_breakpoint, we set
target_info.placed_address and target_info.placed_size like this,
CORE_ADDR addr = bl->target_info.reqstd_address;
bl->target_info.placed_size = gdbarch_breakpoint_kind_from_pc (bl->gdbarch, &addr);
bl->target_info.placed_address = addr;
return target_insert_breakpoint (bl->gdbarch, &bl->target_info);
target_insert_breakpoint may fail, but it doesn't matter to the "kind"
and "placed_address" of a breakpoint. They should be determined by
gdbarch.
gdb:
2016-11-03 Yao Qi <yao.qi@linaro.org>
* arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Define
breakpoint_kind_from_pc and sw_breakpoint_from_kind.
(GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN): Likewise.
(SET_GDBARCH_BREAKPOINT_MANIPULATION): Call
set_gdbarch_breakpoint_kind_from_pc and
set_gdbarch_sw_breakpoint_from_kind.
* arm-tdep.c: Add comments.
* bfin-tdep.c: Likewise.
* breakpoint.c (breakpoint_kind): New function.
(insert_bp_location): Set target_info.placed_size and
target_info.placed_address.
(bkpt_insert_location): Likewise.
* cris-tdep.c: Add comments.
* gdbarch.sh (breakpoint_kind_from_pc): New.
(sw_breakpoint_from_kind): New.
* gdbarch.c, gdbarch.h: Regenerated.
* ia64-tdep.c (ia64_memory_insert_breakpoint): Don't set
bp_tgt->placed_size.
(ia64_memory_remove_breakpoint): Don't assert
bp_tgt->placed_size.
(ia64_breakpoint_kind_from_pc): New function.
(ia64_gdbarch_init): Install ia64_breakpoint_kind_from_pc.
* m32r-tdep.c (m32r_memory_insert_breakpoint): Don't set
bp_tgt->placed_size.
* mem-break.c (default_memory_insert_breakpoint): Don't set
bp_tgt->placed_size. Call gdbarch_sw_breakpoint_from_kind.
(default_memory_remove_breakpoint): Call
gdbarch_sw_breakpoint_from_kind.
(memory_validate_breakpoint): Don't check bp_tgt->placed_size.
* mips-tdep.c: Add comments.
* mt-tdep.c: Likewise.
* nios2-tdep.c: Likewise.
* record-full.c (record_full_insert_breakpoint): Don't call
gdbarch_breakpoint_from_pc. Don't set bp_tgt->placed_address
and bp_tgt->placed_size.
* remote.c (remote_insert_breakpoint): Don't call
gdbarch_remote_breakpoint_from_pc. Use bp_tgt->placed_size.
Don't set bp_tgt->placed_address and bp_tgt->placed_size.
(remote_insert_hw_breakpoint): Likewise.
* score-tdep.c: Likewise.
* sh-tdep.c: Likewise.
* tic6x-tdep.c: Likewise.
* v850-tdep.c: Likewise.
* xtensa-tdep.c: Likewise.
Currently, with "maint set target-non-stop on", that is, when gdb
connects with the non-stop/asynchronous variant of the remote
protocol, even with "set non-stop off", GDB always sends one vCont
packet per thread resumed. This patch makes GDB aggregate and
coalesce vCont packets, so we send vCont packets like "vCont;s:p1.1;c"
in non-stop mode too.
Basically, this is done by:
- Adding a new target method target_commit_resume that is called
after calling target_resume one or more times. When resuming a
batch of threads, we'll only call target_commit_resume once after
calling target_resume for all threads.
- Making the remote target defer sending the actual vCont packet to
target_commit_resume.
Special care must be taken to avoid sending a vCont action with a
"wildcard" thread-id (all threads of process / all threads) when that
would resume threads/processes that should not be resumed. See
remote_commit_resume comments for details.
Unlike all-stop's remote_resume implementation, this handles the case
of too many actions resulting in a too-big vCont packet, by flushing
the vCont packet and starting a new one.
E.g., imagining that the "c" action in:
vCont;s:1;c
overflows the packet buffer, we split the actions like:
vCont;s:1
vCont;c
Tested on x86_64 Fedora 20, with and without "maint set
target-non-stop on".
Also tested with a hack that makes remote_commit_resume flush the vCont
packet after every action appended (which caught a few bugs).
gdb/ChangeLog:
2016-10-26 Pedro Alves <palves@redhat.com>
* inferior.h (ALL_NON_EXITED_INFERIORS): New macro.
* infrun.c (do_target_resume): Call target_commit_resume.
(proceed): Defer target_commit_resume while looping over threads,
resuming them. Call target_commit_resume at the end.
* record-btrace.c (record_btrace_commit_resume): New function.
(init_record_btrace_ops): Install it as to_commit_resume method.
* record-full.c (record_full_commit_resume): New function.
(record_full_wait_1): Call the beneath target's to_commit_resume
method.
(init_record_full_ops): Install record_full_commit_resume as
to_commit_resume method.
* remote.c (struct private_thread_info) <last_resume_step,
last_resume_sig, vcont_resumed>: New fields.
(remote_add_thread): Set the new thread's vcont_resumed flag.
(demand_private_info): Delete.
(get_private_info_thread, get_private_info_ptid): New functions.
(remote_update_thread_list): Adjust.
(process_initial_stop_replies): Clear the thread's vcont_resumed
flag.
(remote_resume): If connected in non-stop mode, record the resume
request and return early.
(struct private_inferior): New.
(struct vcont_builder): New.
(vcont_builder_restart, vcont_builder_flush)
(vcont_builder_push_action): New functions.
(MAX_ACTION_SIZE): New macro.
(remote_commit_resume): New function.
(thread_pending_fork_status, is_pending_fork_parent_thread): New
functions.
(check_pending_event_prevents_wildcard_vcont_callback)
(check_pending_events_prevent_wildcard_vcont): New functions.
(process_stop_reply): Adjust. Clear the thread's vcont_resumed
flag.
(init_remote_ops): Install remote_commit_resume.
* target-delegates.c: Regenerate.
* target.c (defer_target_commit_resume): New global.
(target_commit_resume, make_cleanup_defer_target_commit_resume):
New functions.
* target.h (struct target_ops) <to_commit_resume>: New field.
(target_resume): Update comments.
(target_commit_resume): New declaration.
This patch replaces "keep things single" with "keep things simple".
gdb:
2016-08-31 Yao Qi <yao.qi@linaro.org>
* record-full.c (record_full_insert_breakpoint): Fix typo.
Right after a fork is detected, we detach breakpoints from the child
(detach_breakpoints), which calls into target_remove_breakpoint with
inferior_ptid pointing at the child process, but leaves the breakpoint
marked inserted (in the parent).
The problem is that record-full.c always deletes all knowledge of the
breakpoint. Then when we later really delete the breakpoint from the
parent, we fail the assertion, since the breakpoint is unexpectedly
not found in the record-full.c breakpoint table.
The fix is simply to not forget about the breakpoint if we're
detaching it from a fork child.
gdb/ChangeLog:
2016-08-10 Pedro Alves <palves@redhat.com>
PR gdb/19187
* record-full.c (record_full_remove_breakpoint): Don't remove the
breakpoint from the record_full_breakpoints VEC if we're detaching
the breakpoint from a fork child.
gdb/testsuite/ChangeLog:
2016-08-10 Pedro Alves <palves@redhat.com>
PR gdb/19187
* gdb.reverse/waitpid-reverse.exp: Add comment and remove
setup_kfails.
Eclipse CDT now supports enabling execution recording using two methods
(full and btrace) and both formats for btrace (bts and pt). In the
event that recording is enabled behind the back of the GUI (by the user
on the command line, or a script), we need to know which method/format
are being used, so it can be correctly reflected in the interface. This
patch adds this information to the =record-started async record.
Before:
=record-started,thread-group="i1"
After:
=record-started,thread-group="i1",method="btrace",format="bts"
=record-started,thread-group="i1",method="btrace",format="pt"
=record-started,thread-group="i1",method="full"
The "format" field is only present when the current method supports
multiple formats (only the btrace method as of now).
gdb/ChangeLog:
* NEWS: Mention the new fields in =record-started.
* common/btrace-common.h (btrace_format_short_string): New function
declaration.
* common/btrace-common.c (btrace_format_short_string): New
function.
* mi/mi-interp.c (mi_record_changed): Output method and format
fields in the =record-started record.
* record-btrace.c (record_btrace_open): Adapt record_changed
notification.
* record-full.c (record_full_open): Likewise.
* record.c (cmd_record_stop): Likewise.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Async Records): Document method and
format fields in =record-started.
* observer.texi (record_changed): Add method and format
parameters.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-record-changed.exp: Adjust =record-started output
matching.
Any time a caller calls query & friends / prompt_for_continue without
ensuring that gdb owns the terminal for input is a bug. So do that in
defaulted_query / prompt_for_continue directly instead.
An example of a case where we currently miss calling
target_terminal_ours is internal_error. Ever since defaulted_query
was made to use gdb_readline_callback, there's no way to answer the
internal error query if the internal error happens while the target is
has the terminal:
(gdb) c
Continuing.
.../src/gdb/linux-nat.c:1676: internal-error: linux_nat_resume: Assertion `dummy_counter < 10' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) _
Entering 'y' or 'n' does not work, GDB does not respond.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
PR gdb/19828
* gnu-nat.c (inf_validate_task_sc): Don't call
target_terminal_ours / target_terminal_inferior around query.
* i386-tdep.c (i386_record_lea_modrm, i386_process_record): Don't
call target_terminal_ours / target_terminal_inferior around
yquery.
* linux-record.c (record_linux_system_call): Don't call
target_terminal_ours / target_terminal_inferior around yquery.
* nto-procfs.c (interrupt_query): Don't call target_terminal_ours
/ target_terminal_inferior around query.
* record-full.c (record_full_check_insn_num): Remove
'set_terminal' parameter. Don't call target_terminal_ours /
target_terminal_inferior around query.
(record_full_message, record_full_registers_change)
(record_full_xfer_partial): Adjust.
* remote.c (interrupt_query): Don't call target_terminal_ours /
target_terminal_inferior around query.
* utils.c (defaulted_query): Install cleanup to restore target
terminal. Put target_terminal_ours_for_output in effect while
defaulted producing, and target_terminal_ours in in effect while
handling input.
(prompt_for_continue): Install cleanup to restore target terminal.
Put target_terminal_ours in in effect while handling input.
Some test fails in gdb.reverse/break-reverse.exp on arm-linux lead me
seeing the following error message,
continue^M
Continuing.^M
Cannot remove breakpoints because program is no longer writable.^M
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Further execution is probably impossible.^M
^M
Breakpoint 3, bar () at /home/yao/SourceCode/gnu/gdb/git/gdb/testsuite/gdb.reverse/break-reverse.c:22^M
22 xyz = 2; /* break in bar */^M
(gdb) PASS: gdb.reverse/break-reverse.exp: continue to breakpoint: bar backward
this is caused by two entries in record_full_breakpoints, and their addr
is the same, but in_target_beneath is different.
during the record, we do continue,
Continuing.
infrun: clear_proceed_status_thread (Thread 13772.13772)
infrun: proceed (addr=0xffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: step-over queue now empty
infrun: resuming [Thread 13772.13772] for step-over
infrun: skipping breakpoint: stepping past insn at: 0x8620
Sending packet: $Z0,85f4,4#1d...Packet received: OK <----
.....
Sending packet: $vCont;c#a8...infrun: target_wait (-1.0.0, status) =
infrun: -1.0.0 [process -1],
infrun: status->kind = ignore
infrun: TARGET_WAITKIND_IGNORE
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: -1.0.0 [process -1],
infrun: status->kind = ignore
infrun: TARGET_WAITKIND_IGNORE
infrun: prepare_to_wait
Packet received: T05swbreak:;0b:9cf5ffbe;0d:9cf5ffbe;0f:f4850000;thread:p35cc.35cc;core:1;
Sending packet: $Z0,85f4,4#1d...Packet received: OK <-----
....
Sending packet: $z0,85f4,4#3d...Packet received: OK <-----
we can see breakpoint on 0x85f4 are inserted *twice*, but only removed
once. That is fine to remote target, because Z/z packets are
idempotent, but there is a leftover in record_full_breakpoints
in record-full target. The flow can be described as below,
record_full_breakpoints remote target
-----------------------------------------------------------------------
forward execution, continue, in_target_beneath 1 breakpoint inserted
insert breakpoints on 0x85f4 in_target_beneath 1
twice
program stops,
remove breakpoint on 0x85f4 in_target_beneath 1 breakpoint removed
reverse execution, continue, in_target_beneath 1 none is requested
insert breakpoints on 0x85f4, in_target_beneath 0
program stops,
remote breakpoint on 0x85f4, in_target_beneath 0 request to remove,
but GDBserver
doesn't know
now, the question is why breakoint on 0x85f4 is inserted twice? One
is the normal breakpoint, and the other is the single step breakpoint.
GDB inserts single step breakpoint to do single step. When program
stops at 0x85f4, both of them are set on 0x85f4, and GDB deletes
single step breakpoint, so in update_global_location_list, this
breakpoint location is no longer found, GDB call
force_breakpoint_reinsertion to mark it condition_updated, and insert
it again.
The reason force_breakpoint_reinsertion is called to update the
conditions in the target side, because the conditions may be
changed. My original fix is to not call force_breakpoint_reinsertion
if OLD_LOC->cond is NULL, but it is not correct if another location
on the same address has condition, GDB doesn't produce condition for
target side, but GDB should do.
Then, I change my mind back to make record-full handling breakpoint
idempotent, to align with remote target. Before insert a new entry
into record_full_breakpoints, look for existing one on the same
address first. I also add an assert on
"bp->in_target_beneath == in_target_beneath", to be safer.
gdb:
2016-04-07 Yao Qi <yao.qi@linaro.org>
* record-full.c (record_full_insert_breakpoint): Return
early if entry on the address is found in
record_full_breakpoints.
I notice that bp_tgt won't be fully initialized if to_insert_breakpoint
isn't called in record_full_insert_breakpoint, and bp_tgt->reqstd_address
is zero, so an entry is added to record_full_breakpoints, but its address
is zero, which is wrong. This patch is to call gdbarch_breakpoint_from_pc
in the else branch to set bp_tgt->reqstd_address and bp_tgt->placed_size.
gdb:
2016-04-07 Yao Qi <yao.qi@linaro.org>
* record-full.c (record_full_insert_breakpoint): Set
bp_tgt->reqstd_address and bp_tgt->placed_size.
On the newly added s390 target, it's possible for a single instruction
to write practically unbounded amount of memory (eg. MVCLE). This caused
a stack overflow when alloca was used.
gdb/ChangeLog:
* record-full.c (record_full_exec_insn): Use xmalloc for temporary
memory storage.
I caught a segmentation fault while running gdb.reverse/sigall-reverse.exp,
in a mingw32 GDB, in this code path. It boils down to the code trying to
strlen () a NULL pointer. I tracked things down and it looks like
record_full_message_wrapper_safe is the only offender.
gdb/ChangeLog:
2015-10-26 Luis Machado <lgustavo@codesourcery.com>
* record-full.c (record_full_message_wrapper_safe): Pass empty string to
catch_errors call instead of NULL.
Add a new target method to_record_will_replay to query if there is a record
target that will replay at least one thread matching the argument PTID if it
were executed in the argument execution direction.
gdb/
* record-btrace.c ((record_btrace_will_replay): New.
(init_record_btrace_ops): Initialize to_record_will_replay.
* record-full.c ((record_full_will_replay): New.
(init_record_full_ops): Initialize to_record_will_replay.
* target-delegates.c: Regenerated.
* target.c (target_record_will_replay): New.
* target.h (struct target_ops) <to_record_will_replay>: New.
(target_record_will_replay): New.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
The to_record_is_replaying target method is used to query record targets if
they are replaying. This is currently interpreted as "is any thread being
replayed".
Add a PTID argument and change the interpretation to "is any thread matching
PTID being replayed".
Change all users to pass minus_one_ptid to preserve the old meaning.
The record full target does not really support multi-threading and ignores
the PTID argument.
gdb/
* record-btrace.c (record_btrace_is_replaying): Add ptid argument.
Update users to pass minus_one_ptid.
* record-full.c (record_full_is_replaying): Add ptid argument (ignored).
* record.c (cmd_record_delete): Pass inferior_ptid to
target_record_is_replaying.
* target-delegates.c: Regenerated.
* target.c (target_record_is_replaying): Add ptid argument.
* target.h (struct target_ops) <to_record_is_replaying>: Add ptid
argument.
(target_record_is_replaying): Add ptid argument.
This patch is mostly extracted from Pedro's C++ branch. It adds explicit
casts from integer to enum types, where it is really the intention to do
so. This could be because we are ...
* iterating on enum values (we need to iterate on an equivalent integer)
* converting from a value read from bytes (dwarf attribute, agent
expression opcode) to the equivalent enum
* reading the equivalent integer value from another language (Python/Guile)
An exception to that is the casts in regcache.c. It seems to me like
struct regcache's register_status field could be a pointer to an array of
enum register_status. Doing so would waste a bit of memory (4 bytes
used by the enum vs 1 byte used by the current signed char, for each
register). If we switch to C++11 one day, we can define the underlying
type of an enum type, so we could have the best of both worlds.
gdb/ChangeLog:
* arm-tdep.c (set_fp_model_sfunc): Add cast from integer to enum.
(arm_set_abi): Likewise.
* ax-general.c (ax_print): Likewise.
* c-exp.y (exp : string_exp): Likewise.
* compile/compile-loc2c.c (compute_stack_depth_worker): Likewise.
(do_compile_dwarf_expr_to_c): Likewise.
* cp-name-parser.y (demangler_special : DEMANGLER_SPECIAL start):
Likewise.
* dwarf2expr.c (execute_stack_op): Likewise.
* dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise.
(disassemble_dwarf_expression): Likewise.
* dwarf2read.c (dwarf2_add_member_fn): Likewise.
(read_array_order): Likewise.
(abbrev_table_read_table): Likewise.
(read_attribute_value): Likewise.
(skip_unknown_opcode): Likewise.
(dwarf_decode_macro_bytes): Likewise.
(dwarf_decode_macros): Likewise.
* eval.c (value_f90_subarray): Likewise.
* guile/scm-param.c (gdbscm_make_parameter): Likewise.
* i386-linux-tdep.c (i386_canonicalize_syscall): Likewise.
* infrun.c (handle_command): Likewise.
* memory-map.c (memory_map_start_memory): Likewise.
* osabi.c (set_osabi): Likewise.
* parse.c (operator_length_standard): Likewise.
* ppc-linux-tdep.c (ppc_canonicalize_syscall): Likewise, and use
single return point.
* python/py-frame.c (gdbpy_frame_stop_reason_string): Likewise.
* python/py-symbol.c (gdbpy_lookup_symbol): Likewise.
(gdbpy_lookup_global_symbol): Likewise.
* record-full.c (record_full_restore): Likewise.
* regcache.c (regcache_register_status): Likewise.
(regcache_raw_read): Likewise.
(regcache_cooked_read): Likewise.
* rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
* symtab.c (initialize_ordinary_address_classes): Likewise.
* target-debug.h (target_debug_print_signals): Likewise.
* utils.c (do_restore_current_language): Likewise.
When navigating in the recorded execution trace via "record goto", we do not
set stop_pc. This may trigger an internal error in infrun.c when stepping
from that location. Set it.
(gdb) rec full
(gdb) c
Continuing.
Breakpoint 1, foo (void) at foo.c:42
42 x = y
(gdb) rn
foo (void)
at foo.c:41
41 y = x
(gdb) rec go end
Go forward to insn number 98724
at foo.c:42
42 x = y
(gdb) n
infrun.c:2382: internal-error: resume: Assertion `sig != GDB_SIGNAL_0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
This happens because there's a breakpoint at PC when the "next"
is issued, so that breapoint should be immediately stepped over.
That should have been detected/done by proceed, here:
if (addr == (CORE_ADDR) -1)
{
if (pc == stop_pc
&& breakpoint_here_p (aspace, pc) == ordinary_breakpoint_here
&& execution_direction != EXEC_REVERSE)
/* There is a breakpoint at the address we will resume at,
step one instruction before inserting breakpoints so that
we do not stop right away (and report a second hit at this
breakpoint).
Note, we don't do this in reverse, because we won't
actually be executing the breakpoint insn anyway.
We'll be (un-)executing the previous instruction. */
tp->stepping_over_breakpoint = 1;
But since stop_pc was stale, the pc == stop_pc check failed, and left the
breakpont at PC inserted.
gdb/
* record-btrace.c (record_btrace_goto_begin, record_btrace_goto_end)
record_btrace_goto): Move call to print_stack_frame ...
(record_btrace_set_replay): ... here. Set stop_pc.
* record-full.c (record_full_goto_entry): Set stop_pc.
testsuite/
* gdb.btrace/record_goto-step.exp: New.
All callers of target_async pass it the same callback
(inferior_event_handler). Since both common code and target backends
need to be able to put the target in and out of target async mode at
any given time, there's really no way that a different callback could
be passed. This commit simplifies things, and removes the indirection
altogether. Bonus: with this, gdb's target_async method ends up with
the same signature as gdbserver's.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/ChangeLog:
2015-03-25 Pedro Alves <palves@redhat.com>
* target.h <to_async>: Replace 'callback' and 'context' parameters
with boolean 'enable' parameter.
(target_async): Replace CALLBACK and CONTEXT parameters with
boolean ENABLE parameter.
* inf-loop.c (inferior_event_handler): Adjust.
* linux-nat.c (linux_nat_attach, linux_nat_resume)
(linux_nat_resume): Adjust.
(async_client_callback, async_client_context): Delete.
(handle_target_event): Call inferior_event_handler directly.
(linux_nat_async): Replace 'callback' and 'context' parameters
with boolean 'enable' parameter. Adjust. Remove references to
async_client_callback and async_client_context.
(linux_nat_close): Adjust.
* record-btrace.c (record_btrace_async): Replace 'callback' and
'context' parameters with boolean 'enable' parameter. Adjust.
(record_btrace_resume): Adjust.
* record-full.c (record_full_async): Replace 'callback' and
'context' parameters with boolean 'enable' parameter. Adjust.
(record_full_resume, record_full_core_resume): Adjust.
* remote.c (struct remote_state) <async_client_callback,
async_client_context>: Delete fields.
(remote_start_remote, extended_remote_attach_1, remote_resume)
(extended_remote_create_inferior): Adjust.
(remote_async_serial_handler): Call inferior_event_handler
directly.
(remote_async): Replace 'callback' and 'context' parameters with
boolean 'enable' parameter. Adjust.
* top.c (gdb_readline_wrapper_cleanup, gdb_readline_wrapper):
Adjust.
* target-delegates.c: Regenerate.
This adjusts the record targets to tell the core whether a trap was
caused by a breakpoint. Targets that can do this should report
breakpoint traps with the PC already adjusted, so this removes the
re-incrementing record-full was doing.
These targets need to be adjusted before process_stratum targets
beneath are, otherwise target_supports_stopped_by_sw_breakpoint,
etc. would fall through to the target beneath while
recording/replaying, and the core would get confused.
Tested on x86-64 Fedora 20, native and gdbserver.
gdb/ChangeLog:
2015-03-04 Pedro Alves <palves@redhat.com>
* btrace.h: Include target/waitstatus.h.
(struct btrace_thread_info) <stop_reason>: New field.
* record-btrace.c (record_btrace_step_thread): Use
record_check_stopped_by_breakpoint instead of breakpoint_here_p.
(record_btrace_decr_pc_after_break): Delete.
(record_btrace_stopped_by_sw_breakpoint)
(record_btrace_supports_stopped_by_sw_breakpoint)
(record_btrace_stopped_by_hw_breakpoint)
(record_btrace_supports_stopped_by_hw_breakpoint): New functions.
(init_record_btrace_ops): Install them.
* record-full.c (record_full_hw_watchpoint): Delete and replace
with ...
(record_full_stop_reason): ... this throughout.
(record_full_exec_insn): Adjust.
(record_full_wait_1): Adjust. No longer re-increment the PC.
(record_full_wait_1): Adjust. Use
record_check_stopped_by_breakpoint instead of breakpoint_here_p.
(record_full_stopped_by_watchpoint): Adjust.
(record_full_stopped_by_sw_breakpoint)
(record_full_supports_stopped_by_sw_breakpoint)
(record_full_supports_stopped_by_sw_breakpoint)
(record_full_stopped_by_hw_breakpoint)
(record_full_supports_stopped_by_hw_breakpoint): New functions.
(init_record_full_ops, init_record_full_core_ops): Install them.
* record.c (record_check_stopped_by_breakpoint): New function.
* record.h: Include target/waitstatus.h.
(record_check_stopped_by_breakpoint): New declaration.
The sigall-reverse.exp test occasionally fails with something like this:
(gdb) PASS: gdb.reverse/sigall-reverse.exp: send signal TERM
continue
Continuing.
The next instruction is syscall exit_group. It will make the program exit. Do you want to stop the program?([y] or n) FAIL: gdb.reverse/sigall-reverse.exp: continue to signal exit (timeout)
FAIL: gdb.reverse/sigall-reverse.exp: reverse to handler of TERM (timeout)
FAIL: gdb.reverse/sigall-reverse.exp: reverse to gen_TERM (timeout)
This is another event-loop/async related problem exposed by the patch
that made 'query' use gdb_readline_wrapper (588dcc3edb).
The problem is that even though gdb_readline_wrapper disables
target-async while the secondary prompt is in progress, the record
target's async event source is left marked. So when
gdb_readline_wrapper nests an event loop to process input, it may
happen that that event loop ends up processing a target event while
GDB is not really ready for it. Here's the relevant part of the
backtrace showing the root issue in action:
...
#14 0x000000000061cb48 in fetch_inferior_event (client_data=0x0) at src/gdb/infrun.c:4158
#15 0x0000000000642917 in inferior_event_handler (event_type=INF_REG_EVENT, client_data=0x0) at src/gdb/inf-loop.c:57
#16 0x000000000077ca5c in record_full_async_inferior_event_handler (data=0x0) at src/gdb/record-full.c:791
#17 0x0000000000640fdf in invoke_async_event_handler (data=...) at src/gdb/event-loop.c:1067
#18 0x000000000063fb01 in process_event () at src/gdb/event-loop.c:339
#19 0x000000000063fb2a in gdb_do_one_event () at src/gdb/event-loop.c:360
#20 0x000000000074d607 in gdb_readline_wrapper (prompt=0x3588f40 "The next instruction is syscall exit_group. It will make the program exit. Do you want to stop the program?([y] or n) ") at src/gdb/top.c:842
#21 0x0000000000750bd9 in defaulted_query (ctlstr=0x8c6588 "The next instruction is syscall exit_group. It will make the program exit. Do you want to stop the program?", defchar=121 'y', args=0x7fff70524410) at src/gdb/utils.c:1279
#22 0x0000000000750e4c in yquery (ctlstr=0x8c6588 "The next instruction is syscall exit_group. It will make the program exit. Do you want to stop the program?") at src/gdb/utils.c:1358
#23 0x00000000004b020e in record_linux_system_call (syscall=gdb_sys_exit_group, regcache=0x3529450, tdep=0xd6c840 <amd64_linux_record_tdep>) at src/gdb/linux-record.c:1933
With my all-stop-on-top-of-non-stop series, I'm also seeing
gdb.server/ext-attach.exp fail occasionally due to the same issue.
The first part of the fix is for target_async implementations to make
sure to remove/unmark all target-related event sources from the event
loop.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2015-02-03 Pedro Alves <palves@redhat.com>
* event-loop.c (clear_async_event_handler): New function.
* event-loop.h (clear_async_event_handler): New declaration.
* record-btrace.c (record_btrace_async): New function.
(init_record_btrace_ops): Install record_btrace_async.
* record-full.c (record_full_async): New function.
(record_full_resume): Don't mark the async event source here.
(init_record_full_ops): Install record_full_async.
(record_full_core_resume): Don't mark the async event source here.
(init_record_full_core_ops): Install record_full_async.
* remote.c (remote_async): Mark and clear the async stop reply
queue event-loop token as appropriate.
This patch finally makes each thread have its own set of single-step
breakpoints. This paves the way to have multiple threads software
single-stepping, though this patch doesn't flip that switch on yet.
That'll be done on a subsequent patch.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* breakpoint.c (single_step_breakpoints): Delete global.
(insert_single_step_breakpoint): Adjust to store the breakpoint
pointer in the current thread.
(single_step_breakpoints_inserted, remove_single_step_breakpoints)
(cancel_single_step_breakpoints): Delete functions.
(breakpoint_has_location_inserted_here): Make extern.
(single_step_breakpoint_inserted_here_p): Adjust to walk the
breakpoint list.
* breakpoint.h (breakpoint_has_location_inserted_here): New
declaration.
(single_step_breakpoints_inserted, remove_single_step_breakpoints)
(cancel_single_step_breakpoints): Remove declarations.
* gdbthread.h (struct thread_control_state)
<single_step_breakpoints>: New field.
(delete_single_step_breakpoints)
(thread_has_single_step_breakpoints_set)
(thread_has_single_step_breakpoint_here): New declarations.
* infrun.c (follow_exec): Also clear the single-step breakpoints.
(singlestep_breakpoints_inserted_p, singlestep_ptid)
(singlestep_pc): Delete globals.
(infrun_thread_ptid_changed): Remove references to removed
globals.
(resume_cleanups): Delete the current thread's single-step
breakpoints.
(maybe_software_singlestep): Remove references to removed globals.
(resume): Adjust to use thread_has_single_step_breakpoints_set and
delete_single_step_breakpoints.
(init_wait_for_inferior): Remove references to removed globals.
(delete_thread_infrun_breakpoints): Delete the thread's
single-step breakpoints too.
(delete_just_stopped_threads_infrun_breakpoints): Don't delete
single-step breakpoints here.
(delete_stopped_threads_single_step_breakpoints): New function.
(adjust_pc_after_break): Adjust to use
thread_has_single_step_breakpoints_set.
(handle_inferior_event): Remove references to removed globals.
Use delete_stopped_threads_single_step_breakpoints.
(handle_signal_stop): Adjust to per-thread single-step
breakpoints. Swap test order to do cheaper tests first.
(switch_back_to_stepped_thread): Extend debug output. Remove
references to removed globals.
* record-full.c (record_full_wait_1): Adjust to per-thread
single-step breakpoints.
* thread.c (delete_single_step_breakpoints)
(thread_has_single_step_breakpoints_set)
(thread_has_single_step_breakpoint_here): New functions.
(clear_thread_inferior_resources): Also delete the thread's
single-step breakpoints.
This makes target_ops::to_open take a const string and then fixes the
fallout.
There were a few of these I could not build. However I eyeballed it
and in any case the fixes should generally be trivial.
This is based on the patch to fix up the target debugging for to_open,
because that changes gdb to not directly install to_open as the target
command
2014-07-30 Tom Tromey <tromey@redhat.com>
* bsd-kvm.c (bsd_kvm_open): Constify.
* corelow.c (core_open): Constify.
* ctf.c (ctf_open): Constify.
* dbug-rom.c (dbug_open): Constify.
* exec.c (exec_open): Constify.
* m32r-rom.c (m32r_open, mon2000_open): Constify.
* microblaze-rom.c (picobug_open): Constify.
* nto-procfs.c (procfs_open_1, procfs_open, procfs_native_open):
Constify.
* ppcbug-rom.c (ppcbug_open0, ppcbug_open1): Constify.
* record-btrace.c (record_btrace_open): Constify.
* record-full.c (record_full_core_open_1, record_full_open_1)
(record_full_open): Constify.
* remote-m32r-sdi.c (m32r_open): Constify.
* remote-mips.c (common_open, mips_open, pmon_open, ddb_open)
(rockhopper_open, lsi_open): Constify.
* remote-sim.c (gdbsim_open): Constify.
* remote.c (remote_open, extended_remote_open, remote_open_1):
Constify.
* target.h (struct target_ops) <to_open>: Make "arg" const.
* tracefile-tfile.c (tfile_open): Constify.
This makes arguments to to_get_bookmark and to_goto_bookmark const and
fixes the fallout. Tested by rebuilding. The only thing of note is
the new split between cmd_record_goto and record_goto -- basically
separating the CLI function from a new internal API, to allow const
propagation.
2014-06-26 Tom Tromey <tromey@redhat.com>
* record-full.c (record_full_get_bookmark): Make "args" const.
(record_full_goto_bookmark): Make "raw_bookmark" const.
* record.c (record_goto): New function.
(cmd_record_goto): Use it. Now static.
* record.h (record_goto): Declare.
(cmd_record_goto): Remove declaration.
* target-delegates.c: Rebuild.
* target.h (struct target_ops) <to_get_bookmark,
to_goto_bookmark>: Make parameter const.
Move infrun.c declarations out of inferior.h to a new infrun.h file.
Tested by building on:
i686-w64-mingw32, enable-targets=all
x86_64-linux, enable-targets=all
i586-pc-msdosdjgpp
And also grepped the whole tree for each symbol moved to find where
infrun.h might be necessary.
gdb/
2014-05-22 Pedro Alves <palves@redhat.com>
* inferior.h (debug_infrun, debug_displaced, stop_on_solib_events)
(sync_execution, sched_multi, step_stop_if_no_debug, non_stop)
(disable_randomization, enum exec_direction_kind)
(execution_direction, stop_registers, start_remote)
(clear_proceed_status, proceed, resume, user_visible_resume_ptid)
(wait_for_inferior, normal_stop, get_last_target_status)
(prepare_for_detach, fetch_inferior_event, init_wait_for_inferior)
(insert_step_resume_breakpoint_at_sal)
(follow_inferior_reset_breakpoints, stepping_past_instruction_at)
(set_step_info, print_stop_event, signal_stop_state)
(signal_print_state, signal_pass_state, signal_stop_update)
(signal_print_update, signal_pass_update)
(update_signals_program_target, clear_exit_convenience_vars)
(displaced_step_dump_bytes, update_observer_mode)
(signal_catch_update, gdb_signal_from_command): Move
declarations ...
* infrun.h: ... to this new file.
* amd64-tdep.c: Include infrun.h.
* annotate.c: Include infrun.h.
* arch-utils.c: Include infrun.h.
* arm-linux-tdep.c: Include infrun.h.
* arm-tdep.c: Include infrun.h.
* break-catch-sig.c: Include infrun.h.
* breakpoint.c: Include infrun.h.
* common/agent.c: Include infrun.h instead of inferior.h.
* corelow.c: Include infrun.h.
* event-top.c: Include infrun.h.
* go32-nat.c: Include infrun.h.
* i386-tdep.c: Include infrun.h.
* inf-loop.c: Include infrun.h.
* infcall.c: Include infrun.h.
* infcmd.c: Include infrun.h.
* infrun.c: Include infrun.h.
* linux-fork.c: Include infrun.h.
* linux-nat.c: Include infrun.h.
* linux-thread-db.c: Include infrun.h.
* monitor.c: Include infrun.h.
* nto-tdep.c: Include infrun.h.
* procfs.c: Include infrun.h.
* record-btrace.c: Include infrun.h.
* record-full.c: Include infrun.h.
* remote-m32r-sdi.c: Include infrun.h.
* remote-mips.c: Include infrun.h.
* remote-notif.c: Include infrun.h.
* remote-sim.c: Include infrun.h.
* remote.c: Include infrun.h.
* reverse.c: Include infrun.h.
* rs6000-tdep.c: Include infrun.h.
* s390-linux-tdep.c: Include infrun.h.
* solib-irix.c: Include infrun.h.
* solib-osf.c: Include infrun.h.
* solib-svr4.c: Include infrun.h.
* target.c: Include infrun.h.
* top.c: Include infrun.h.
* windows-nat.c: Include infrun.h.
* mi/mi-interp.c: Include infrun.h.
* mi/mi-main.c: Include infrun.h.
* python/py-threadevent.c: Include infrun.h.
A patch in the target cleanup series caused a regression when using
record with target-async. Version 4 of the patch is here:
https://sourceware.org/ml/gdb-patches/2014-03/msg00159.html
The immediate problem is that record supplies to_can_async_p and
to_is_async_p methods, but does not supply a to_async method. So,
when target-async is set, record claims to support async -- but if the
underlying target does not support async, then the to_async method
call will end up in that method's default implementation, namely
tcomplain.
This worked previously because the record target used to provide a
to_async method; one that (erroneously, only at push time) checked the
other members of the target stack, and then simply dropped to_async
calls in the "does not implement async" case.
My first thought was to simply drop tcomplain as the default for
to_async. This works, but Pedro pointed out that the only reason
record has to supply to_can_async_p and to_is_async_p is that these
default to using the find_default_run_target machinery -- and these
defaults are only needed by "run" and "attach".
So, a nicer solution presents itself: change run and attach to
explicitly call into the default run target when needed; and change
to_is_async_p and to_can_async_p to default to "return 0". This makes
the target stack simpler to use and lets us remove the method
implementations from record. This is also in harmony with other plans
for the target stack; namely trying to reduce the impact of
find_default_run_target. This approach makes it clear that
find_default_is_async_p is not needed -- it is asking whether a target
that may not even be pushed is actually async, which seems like a
nonsensical question.
While an improvement, this approach proved to introduce the same bug
when using the core target. Looking a bit deeper, the issue is that
code in "attach" and "run" may need to use either the current target
stack or the default run target -- but different calls into the target
API in those functions could wind up querying different targets.
This new patch makes the target to use more explicit in "run" and
"attach". Then these commands explicitly make the needed calls
against that target. This ensures that a single target is used for
all relevant operations. This lets us remove a couple find_default_*
functions from various targets, including the dummy target. I think
this is a decent understandability improvement.
One issue I see with this patch is that the new calls in "run" and
"attach" are not very much like the rest of the target API. I think
fundamentally this is due to bad factoring in the target API, which
may need to be fixed for multi-target. Tackling that seemed ambitious
for a regression fix.
While working on this I noticed that there don't seem to be any test
cases that involve both target-async and record, so this patch changes
break-precsave.exp to add some. It also changes corefile.exp to add
some target-async tests; these pass with current trunk and with this
patch applied, but fail with the v1 patch.
This patch differs from v4 in that it moves initialization of
to_can_async_p and to_supports_non_stop into inf-child, adds some
assertions to complete_target_initialization, and adds some comments
to target.h.
Built and regtested on x86-64 Fedora 20.
2014-03-12 Tom Tromey <tromey@redhat.com>
* inf-child.c (return_zero): New function.
(inf_child_target): Set to_can_async_p, to_supports_non_stop.
* aix-thread.c (aix_thread_inferior_created): New function.
(aix_thread_attach): Remove.
(init_aix_thread_ops): Don't set to_attach.
(_initialize_aix_thread): Register inferior_created observer.
* corelow.c (init_core_ops): Don't set to_attach or
to_create_inferior.
* exec.c (init_exec_ops): Don't set to_attach or
to_create_inferior.
* infcmd.c (run_command_1): Use find_run_target. Make direct
target calls.
(attach_command): Use find_attach_target. Make direct target
calls.
* record-btrace.c (init_record_btrace_ops): Don't set
to_create_inferior.
* record-full.c (record_full_can_async_p, record_full_is_async_p):
Remove.
(init_record_full_ops, init_record_full_core_ops): Update. Don't
set to_create_inferior.
* target.c (complete_target_initialization): Add assertion.
(target_create_inferior): Remove.
(find_default_attach, find_default_create_inferior): Remove.
(find_attach_target, find_run_target): New functions.
(find_default_is_async_p, find_default_can_async_p)
(target_supports_non_stop, target_attach): Remove.
(init_dummy_target): Don't set to_create_inferior or
to_supports_non_stop.
* target.h (struct target_ops) <to_attach>: Add comment. Remove
TARGET_DEFAULT_FUNC.
<to_create_inferior>: Add comment.
<to_can_async_p, to_is_async_p, to_supports_non_stop>: Use
TARGET_DEFAULT_RETURN.
<to_can_async_p, to_supports_non_stop, to_can_run>: Add comments.
(find_attach_target, find_run_target): Declare.
(target_create_inferior): Remove.
(target_has_execution_1): Update comment.
(target_supports_non_stop): Remove.
* target-delegates.c: Rebuild.
2014-03-12 Tom Tromey <tromey@redhat.com>
* gdb.base/corefile.exp (corefile_test_run, corefile_test_attach):
New procs. Add target-async tests.
* gdb.reverse/break-precsave.exp (precsave_tests): New proc.
Add target-async tests.
This patch replaces some code in the record targets with target method
delegation.
record-full.c stores pointers to many target methods when the record
target is pushed. Then it later delegates some calls via these. This
is wrong because it violates the target stack contract. In particular
it is ok to unpush a target at any stratum, but record-full does not
keep track of this, so it could potentially call into an unpushed
target.
This patch fixes the problem by using the newly-introduced generic
approach to target delegation for the methods in question.
2014-02-19 Tom Tromey <tromey@redhat.com>
* record-full.c (record_full_beneath_to_resume_ops)
(record_full_beneath_to_resume, record_full_beneath_to_wait_ops)
(record_full_beneath_to_wait)
(record_full_beneath_to_store_registers_ops)
(record_full_beneath_to_store_registers)
(record_full_beneath_to_xfer_partial_ops)
(record_full_beneath_to_xfer_partial)
(record_full_beneath_to_insert_breakpoint_ops)
(record_full_beneath_to_insert_breakpoint)
(record_full_beneath_to_remove_breakpoint_ops)
(record_full_beneath_to_remove_breakpoint)
(record_full_beneath_to_stopped_by_watchpoint)
(record_full_beneath_to_stopped_data_address)
(record_full_beneath_to_async, tmp_to_resume_ops, tmp_to_resume)
(tmp_to_wait_ops, tmp_to_wait, tmp_to_store_registers_ops)
(tmp_to_store_registers, tmp_to_xfer_partial_ops)
(tmp_to_xfer_partial, tmp_to_instmp_to_insert_breakpoint_ops)
(tmp_to_insert_breakpoint, tmp_to_remove_breakpoint_ops)
(tmp_to_remove_breakpoint, tmp_to_stopped_by_watchpoint)
(tmp_to_stopped_data_address, tmp_to_async): Remove.
(record_full_open_1, record_full_open): Update. Use RECORD_IS_USED.
(record_full_resume, record_full_wait_1)
(record_full_stopped_by_watchpoint, record_full_stopped_data_address)
(record_full_store_registers, record_full_xfer_partial)
(record_full_insert_breakpoint, record_full_remove_breakpoint)
(record_full_async, record_full_core_xfer_partial): Use target
delegation.
* target-delegates.c: Rebuild.
* target.c (current_xfer_partial): Remove.
(update_current_target): Do not INHERIT or de_fault
to_insert_breakpoint, to_remove_breakpoint,
to_stopped_data_address, to_stopped_by_watchpoint, to_can_async_p,
to_is_async_p, to_async. Do not set to_xfer_partial field.
(default_xfer_partial): Simplify.
(current_xfer_partial): Remove.
(target_wait, target_resume): Simplify.
(find_default_can_async_p, find_default_is_async_p): Update.
(init_dummy_target): Don't set to_can_async_p, to_is_async_p,
to_xfer_partial, to_stopped_by_watchpoint,
to_stopped_data_address.
(target_store_registers): Simplify.
(forward_target_remove_breakpoint)
(forward_target_insert_breakpoint): Remove.
(target_remove_breakpoint, target_insert_breakpoint)
(debug_to_insert_breakpoint, debug_to_remove_breakpoint): Update.
* target.h (struct target_ops) <to_resume, to_wait,
to_store_registers, to_insert_breakpoint, to_remove_breakpoint,
to_stopped_by_watchpoint, to_stopped_data_address, to_can_async_p,
to_is_async_p, to_async, to_xfer_partial>: Add TARGET_DEFAULT
markup.
(forward_target_remove_breakpoint)
(forward_target_insert_breakpoint): Remove.
* record-btrace.c (record_btrace_remove_breakpoint): Delegate
directly.
(record_btrace_insert_breakpoint): Delegate directly.
This patch does the conversion of to_xfer_partial from
LONGEST (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len);
to
enum target_xfer_status (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len, ULONGEST *xfered_len);
It changes to_xfer_partial return the transfer status and the transfered
length by *XFERED_LEN. Generally, the return status has three stats,
- TARGET_XFER_OK,
- TARGET_XFER_EOF,
- TARGET_XFER_E_XXXX,
See the comments to them in 'enum target_xfer_status'. Note that
Pedro suggested not name TARGET_XFER_DONE, as it is confusing,
compared with "TARGET_XFER_OK". We finally name it TARGET_XFER_EOF.
With this change, GDB core can handle unavailable data in a convenient
way.
The rationale behind this change was mentioned here
https://sourceware.org/ml/gdb-patches/2013-10/msg00761.html
Consider an object/value like this:
0 100 150 200 512
DDDDDDDDDDDxxxxxxxxxDDDDDD...DDIIIIIIIIIIII..III
where D is valid data, and xxx is unavailable data, and I is beyond
the end of the object (Invalid). Currently, if we start the
xfer at 0, requesting, say 512 bytes, we'll first get back 100 bytes.
The xfer machinery then retries fetching [100,512), and gets back
TARGET_XFER_E_UNAVAILABLE. That's sufficient when you're either
interested in either having the whole of the 512 bytes available,
or erroring out. But, in this scenario, we're interested in
the data at [150,512). The problem is that the last
TARGET_XFER_E_UNAVAILABLE gives us no indication where to
start the read next. We'd need something like:
get me [0,512) >>>
<<< here's [0,100), *xfered_len is 100, returns TARGET_XFER_OK
get me [100,512) >>> (**1)
<<< [100,150) is unavailable, *xfered_len is 50, return TARGET_XFER_E_UNAVAILABLE.
get me [150,512) >>>
<<< here's [150,200), *xfered_len is 50, return TARGET_XFER_OK.
get me [200,512) >>>
<<< no more data, return TARGET_XFER_EOF.
This naturally implies pushing down the decision of whether
to return TARGET_XFER_E_UNAVAILABLE or something else
down to the target. (Which kinds of leads back to tfile
itself reading from RO memory from file (though we could
export a function in exec.c for that that tfile delegates to,
instead of re-adding the old code).
Beside this change, we also add a macro TARGET_XFER_STATUS_ERROR_P to
check whether a status is an error or not, to stop using "status < 0".
This patch also eliminates the comparison between status and 0.
No target implementations to to_xfer_partial adapts this new
interface. The interface still behaves as before.
gdb:
2014-02-11 Yao Qi <yao@codesourcery.com>
* target.h (enum target_xfer_error): Rename to ...
(enum target_xfer_status): ... it. New. All users updated.
(enum target_xfer_status) <TARGET_XFER_OK>, <TARGET_XFER_EOF>:
New.
(TARGET_XFER_STATUS_ERROR_P): New macro.
(target_xfer_error_to_string): Remove declaration.
(target_xfer_status_to_string): Declare.
(target_xfer_partial_ftype): Adjust it.
(struct target_ops) <to_xfer_partial>: Return
target_xfer_status. Add argument xfered_len. Update
comments.
* target.c (target_xfer_error_to_string): Rename to ...
(target_xfer_status_to_string): ... it. New. All callers
updated.
(target_read_live_memory): Likewise. Call target_xfer_partial
instead of target_read.
(memory_xfer_live_readonly_partial): Return
target_xfer_status. Add argument xfered_len.
(raw_memory_xfer_partial): Likewise.
(memory_xfer_partial_1): Likewise.
(memory_xfer_partial): Likewise.
(target_xfer_partial): Likewise. Check *XFERED_LEN is set
properly. Update debug message.
(default_xfer_partial, current_xfer_partial): Likewise.
(target_write_partial): Likewise.
(target_read_partial): Likewise. All callers updated.
(read_whatever_is_readable): Likewise.
(target_write_with_progress): Likewise.
(target_read_alloc_1): Likewise.
* aix-thread.c (aix_thread_xfer_partial): Likewise.
* auxv.c (procfs_xfer_auxv): Likewise.
(ld_so_xfer_auxv, memory_xfer_auxv): Likewise.
* bfd-target.c (target_bfd_xfer_partial): Likewise.
* bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
* bsd-uthread.c (bsd_uthread_xfer_partia): Likewise.
* corefile.c (read_memory): Adjust.
* corelow.c (core_xfer_partial): Likewise.
* ctf.c (ctf_xfer_partial): Likewise.
* darwin-nat.c (darwin_read_dyld_info): Likewise. All callers
updated.
(darwin_xfer_partial): Likewise.
* exec.c (section_table_xfer_memory_partial): Likewise. All
callers updated.
(exec_xfer_partial): Likewise.
* exec.h (section_table_xfer_memory_partial): Update
declaration.
* gnu-nat.c (gnu_xfer_memory): Likewise. Assert 'res' is not
negative.
(gnu_xfer_partial): Likewise.
* ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise.
(ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise.
(ia64_hpux_xfer_solib_got): Likewise.
* inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. Change
type of 'partial_len' to ULONGEST.
* inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
* linux-nat.c (linux_xfer_siginfo ): Likewise.
(linux_nat_xfer_partial): Likewise.
(linux_proc_xfer_partial, linux_xfer_partial): Likewise.
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise.
* monitor.c (monitor_xfer_memory): Likewise.
(monitor_xfer_partial): Likewise.
* procfs.c (procfs_xfer_partial): Likewise.
* record-btrace.c (record_btrace_xfer_partial): Likewise.
* record-full.c (record_full_xfer_partial): Likewise.
(record_full_core_xfer_partial): Likewise.
* remote-sim.c (gdbsim_xfer_memory): Likewise.
(gdbsim_xfer_partial): Likewise.
* remote.c (remote_write_bytes_aux): Likewise. All callers
updated.
(remote_write_bytes, remote_read_bytes): Likewise. All
callers updated.
(remote_flash_erase): Likewise. All callers updated.
(remote_write_qxfer): Likewise. All callers updated.
(remote_read_qxfer): Likewise. All callers updated.
(remote_xfer_partial): Likewise.
* rs6000-nat.c (rs6000_xfer_partial): Likewise.
(rs6000_xfer_shared_libraries): Likewise.
* sol-thread.c (sol_thread_xfer_partial): Likewise.
(sol_thread_xfer_partial): Likewise.
* sparc-nat.c (sparc_xfer_wcookie): Likewise.
(sparc_xfer_partial): Likewise.
* spu-linux-nat.c (spu_proc_xfer_spu): Likewise. All callers
updated.
(spu_xfer_partial): Likewise.
* spu-multiarch.c (spu_xfer_partial): Likewise.
* tracepoint.c (tfile_xfer_partial): Likewise.
* windows-nat.c (windows_xfer_memory): Likewise.
(windows_xfer_shared_libraries): Likewise.
(windows_xfer_partial): Likewise.
* valprint.c: Replace 'target_xfer_error' with
'target_xfer_status' in comments.
Simon Marchi
Yao Qi
Pedro Alves
Joel Brobecker
Marcin Kościelnicki
Luis Machado
Markus Metzger
Gary Benson
Tom Tromey
Yao Qi