We start from a process_info pointer, pass down process->pid, and
then the target_kill implementations need to find the process from the
pid again. Pass the process_info pointer down directly instead.
gdb/gdbserver/ChangeLog:
2018-07-13 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_kill): Change parameter to process_info
pointer instead of pid. Adjust.
* lynx-low.c (lynx_kill): Likewise.
* nto-low.c (nto_kill): Likewise.
* spu-low.c (spu_kill): Likewise.
* win32-low.c (win32_kill): Likewise.
* server.c (handle_v_kill, kill_inferior_callback)
(detach_or_kill_for_exit): Adjust.
* target.c (kill_inferior): Change parameter to process_info
pointer instead of pid. Adjust.
* target.h (struct target_ops) <kill>: Change parameter to
process_info pointer instead of pid. Adjust all implementations
and callers.
(kill_inferior): Likewise.
We start from a process_info pointer, pass down process->pid, and then
the target_detach and target_join implementations need to find the
process from the pid again. Pass the process_info pointer down
directly instead.
gdb/gdbserver/ChangeLog:
2018-07-13 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_detach, linux_join): Change parameter to
process_info pointer instead of pid. Adjust.
* lynx-low.c (lynx_detach, lynx_join): Likewise.
* nto-low.c (nto_detach): Likewise.
* spu-low.c (spu_detach, spu_join): Likewise.
* win32-low.c (win32_detach, win32_join): Likewise.
* server.c (handle_detach, detach_or_kill_for_exit): Adjust.
* target.h (struct target_ops) <detach, join>: Change parameter to
process_info pointer instead of pid. Adjust all implementations
and callers.
(detach_inferior, join_inferior): Rename 'pid' parameter to
'proc'.
Remove the to_supports_btrace target method and instead rely on detecting errors
when trying to enable recording. This will also provide a suitable error
message explaining why recording is not possible.
For remote debugging, gdbserver will now always advertise branch tracing related
packets. When talking to an older GDB, this will cause GDB to try to enable
branch tracing and gdbserver to report a suitable error message every time.
An older gdbserver will not advertise branch tracing related packets if the
one-time check failed, so a newer GDB with this patch will fail to enable branch
tracing at remote_enable_btrace() rather than at btrace_enable(). The error
message is the same in both cases so there should be no user-visible change.
gdb/
* btrace.c (btrace_enable): Remove target_supports_btrace call.
* nat/linux-btrace.c (perf_event_pt_event_type): Move.
(kernel_supports_bts, kernel_supports_pt, linux_supports_bts)
(linux_supports_pt, linux_supports_btrace): Remove.
(linux_enable_bts): Call cpu_supports_bts.
* nat/linux-btrace.h (linux_supports_btrace): Remove.
* remote.c (remote_supports_btrace): Remove.
(init_remote_ops): Remove remote_supports_btrace.
* target-delegates.c: Regenerated.
* target.c (target_supports_btrace): Remove.
* target.h (target_ops) <to_supports_btrace>: Remove
(target_supports_btrace): Remove.
* x86-linux-nat.c (x86_linux_create_target): Remove
linux_supports_btrace.
gdbserver/
* linux-low.c (linux_target_ops): Remove linux_supports_btrace.
* nto-low.c (nto_target_ops): Remove NULL for supports_btrace.
* spu-low.c (spu_target_ops): Likewise.
* win32-low.c (win32_target_ops): Likewise.
* server.c (supported_btrace_packets): Report packets unconditionally.
* target.h (target_ops) <supports_btrace>: Remove.
(target_supports_btrace): Remove.
As explained in the previous patch, the gdb_id concept is no longer
relevant. The function thread_to_gdb_id is trivial, it returns the
thread's ptid. Remove it and replace its usage with ptid_of.
The changes in nto-low.c and lynx-low.c are fairly straightforward, but
I was not able to build test them.
gdb/gdbserver/ChangeLog:
* inferiors.h (thread_to_gdb_id): Remove.
* inferiors.c (thread_to_gdb_id): Remove.
* server.c (handle_qxfer_threads_worker, handle_query): Adjust.
* lynx-low.c (lynx_resume, lynx_wait_1, lynx_fetch_registers,
lynx_store_registers, lynx_read_memory, lynx_write_memory):
Likewise.
* nto-low.c (nto_fetch_registers, nto_store_registers,
nto_stopped_by_watchpoint, nto_stopped_data_address): Likewise.
This is the most important (and the biggest, sorry) patch of the
series. It moves fork_inferior from gdb/fork-child.c to
nat/fork-inferior.c and makes all the necessary adjustments to both
GDB and gdbserver to make sure everything works OK.
There is no "most important change" with this patch; all changes are
made in a progressive way, making sure that gdbserver had the
necessary features while not breaking GDB at the same time.
I decided to go ahead and implement a partial support for starting the
inferior with a shell on gdbserver, although the full feature comes in
the next patch. The user won't have the option to disable the
startup-with-shell, and also won't be able to change which shell
gdbserver will use (other than setting the $SHELL environment
variable, that is).
Everything is working as expected, and no regressions were present
during the tests.
gdb/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Add "common/common-inferior.h"
and "nat/fork-inferior.h".
* common/common-inferior.h: New file, with contents from
"gdb/inferior.h".
* commom/common-utils.c: Include "common-utils.h".
(stringify_argv): New function.
* common/common-utils.h (stringify_argv): New prototype.
* configure.nat: Add "fork-inferior.o" as a dependency for
"*linux*", "fbsd*" and "nbsd*" hosts.
* corefile.c (get_exec_file): Update comment.
* darwin-nat.c (darwin_ptrace_him): Call "gdb_startup_inferior"
instead of "startup_inferior".
(darwin_create_inferior): Call "add_thread_silent" after
"fork_inferior".
* fork-child.c: Cleanup unnecessary includes.
(SHELL_FILE): Move to "common/common-fork-child.c".
(environ): Likewise.
(exec_wrapper): Initialize.
(get_exec_wrapper): New function.
(breakup_args): Move to "common/common-fork-child.c"; rename to
"breakup_args_for_exec".
(escape_bang_in_quoted_argument): Move to
"common/common-fork-child.c".
(saved_ui): New variable.
(prefork_hook): New function.
(postfork_hook): Likewise.
(postfork_child_hook): Likewise.
(gdb_startup_inferior): Likewise.
(fork_inferior): Move to "common/common-fork-child.c". Update
function to support gdbserver.
(startup_inferior): Likewise.
* gdbcore.h (get_exec_file): Remove declaration.
* gnu-nat.c (gnu_create_inferior): Call "gdb_startup_inferior"
instead of "startup_inferior". Call "add_thread_silent" after
"fork_inferior".
* inf-ptrace.c: Include "nat/fork-inferior.h" and "utils.h".
(inf_ptrace_create_inferior): Call "gdb_startup_inferior"
instead of "startup_inferior". Call "add_thread_silent" after
"fork_inferior".
* inferior.h: Include "common-inferior.h".
(trace_start_error): Move to "common/common-utils.h".
(trace_start_error_with_name): Likewise.
(fork_inferior): Move prototype to "nat/fork-inferior.h".
(startup_inferior): Likewise.
(gdb_startup_inferior): New prototype.
* nat/fork-inferior.c: New file, with contents from "fork-child.c".
* nat/fork-inferior.h: New file.
* procfs.c (procfs_init_inferior): Call "gdb_startup_inferior"
instead of "startup_inferior". Call "add_thread_silent" after
"fork_inferior".
* target.h (target_terminal_init): Move prototype to
"target/target.h".
(target_terminal_inferior): Likewise.
(target_terminal_ours): Likewise.
* target/target.h (target_terminal_init): New prototype, moved
from "target.h".
(target_terminal_inferior): Likewise.
(target_terminal_ours): Likewise.
* utils.c (gdb_flush_out_err): New function.
gdb/gdbserver/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add "nat/fork-inferior.o".
* configure: Regenerate.
* configure.srv (srv_linux_obj): Add "fork-child.o" and
"fork-inferior.o".
(i[34567]86-*-lynxos*): Likewise.
(spu*-*-*): Likewise.
* fork-child.c: New file.
* linux-low.c: Include "common-inferior.h", "nat/fork-inferior.h"
and "environ.h".
(linux_ptrace_fun): New function.
(linux_create_inferior): Adjust function prototype to reflect
change on "target.h". Adjust function code to use
"fork_inferior".
(linux_request_interrupt): Delete "signal_pid".
* lynx-low.c: Include "common-inferior.h" and "nat/fork-inferior.h".
(lynx_ptrace_fun): New function.
(lynx_create_inferior): Adjust function prototype to reflect
change on "target.h". Adjust function code to use
"fork_inferior".
* nto-low.c (nto_create_inferior): Adjust function prototype and
code to reflect change on "target.h". Update comments.
* server.c: Include "common-inferior.h", "nat/fork-inferior.h",
"common-terminal.h" and "environ.h".
(terminal_fd): Moved to fork-child.c.
(old_foreground_pgrp): Likewise.
(restore_old_foreground_pgrp): Likewise.
(last_status): Make it global.
(last_ptid): Likewise.
(our_environ): New variable.
(startup_with_shell): Likewise.
(program_name): Likewise.
(program_argv): Rename to...
(program_args): ...this.
(wrapper_argv): New variable.
(start_inferior): Delete function.
(get_exec_wrapper): New function.
(get_exec_file): Likewise.
(get_environ): Likewise.
(prefork_hook): Likewise.
(post_fork_inferior): Likewise.
(postfork_hook): Likewise.
(postfork_child_hook): Likewise.
(handle_v_run): Update code to deal with arguments coming from the
remote host. Update calls from "start_inferior" to
"create_inferior".
(captured_main): Likewise. Initialize environment variable. Call
"have_job_control".
* server.h (post_fork_inferior): New prototype.
(get_environ): Likewise.
(last_status): Declare.
(last_ptid): Likewise.
(signal_pid): Likewise.
* spu-low.c: Include "common-inferior.h" and "nat/fork-inferior.h".
(spu_ptrace_fun): New function.
(spu_create_inferior): Adjust function prototype to reflect change
on "target.h". Adjust function code to use "fork_inferior".
* target.c (target_terminal_init): New function.
(target_terminal_inferior): Likewise.
(target_terminal_ours): Likewise.
* target.h: Include <vector>.
(struct target_ops) <create_inferior>: Update prototype.
(create_inferior): Update macro.
* utils.c (gdb_flush_out_err): New function.
* win32-low.c (win32_create_inferior): Adjust function prototype
and code to reflect change on "target.h".
gdb/testsuite/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.server/non-existing-program.exp: Update regex in order to
reflect the fact that gdbserver is now using fork_inferior (with a
shell) to startup the inferior.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
Rename target_ops.arch_setup to .post_create_inferior. In the Linux
hook, continue calling the low arch setup, then also set ptrace flags.
This corrects the possibility of running without flags, demonstrated by
a new test that would fail to catch a fork before.
gdb/gdbserver/ChangeLog:
2015-12-04 Josh Stone <jistone@redhat.com>
* target.h (struct target_ops) <arch_setup>: Rename to ...
(struct target_ops) <post_create_inferior>: ... this.
(target_arch_setup): Rename to ...
(target_post_create_inferior): ... this, calling post_create_inferior.
* server.c (start_inferior): Update target_arch_setup calls to
target_post_create_inferior.
* linux-low.c (linux_low_ptrace_options): Forward declare.
(linux_arch_setup): Update its comment for general use.
(linux_post_create_inferior): New, run arch_setup and setup ptrace.
(struct linux_target_ops): Use linux_post_create_inferior.
* lynx-low.c (struct lynx_target_ops): Update arch_setup stub comment
to post_create_inferior.
* nto-low.c (struct nto_target_ops): Likewise.
* spu-low.c (struct spu_target_ops): Likewise.
* win32-low.c (struct win32_target_ops): Likewise.
gdb/testsuite/ChangeLog:
2015-12-04 Josh Stone <jistone@redhat.com>
* gdb.base/catch-fork-static.exp: New.
This patch fixes the build that was broken by :
https://sourceware.org/ml/gdb-patches/2015-10/msg00369.html
It implements the sw_breakpoint_from_kind operation on these targets and removes
the calls to set_breakpoint_data.
Compiliation tested on win32.
Not tested : nto, spu.
gdb/gdbserver/ChangeLog:
* nto-low.c (nto_sw_breakpoint_from_kind): New function.
(struct target_ops) <sw_breakpoint_from_kind>: Initialize.
(initialize_low): Remove set_breakpoint_data call.
* spu-low.c (spu_sw_breakpoint_from_kind): New function.
(struct target_ops) <sw_breakpoint_from_kind>: Iniitalize.
(initialize_low): Remove set_breakpoint_data call.
* win32-low.c (win32_sw_breakpoint_from_kind): New function.
(struct target_ops) <sw_breakpoint_from_kind>: Initialize.
(initialize_low): Remove set_breakpoint_data call.
In my patch https://sourceware.org/ml/gdb-patches/2015-04/msg01110.html
a new target_ops hook supports_conditional_breakpoints was added to
disable conditional breakpoints if target doesn't have hardware single
step. This patch is to generalize this hook from
supports_conditional_breakpoints to supports_hardware_single_step,
so that the following patch can use it.
gdb/gdbserver:
2015-09-15 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_supports_conditional_breakpoints): Rename
it to ...
(linux_supports_hardware_single_step): ... New function.
(linux_target_ops): Update.
* lynx-low.c (lynx_target_ops): Set field
supports_hardware_single_step to target_can_do_hardware_single_step.
* nto-low.c (nto_target_ops): Likewise.
* spu-low.c (spu_target_ops): Likewise.
* win32-low.c (win32_target_ops): Likewise.
* target.c (target_can_do_hardware_single_step): New function.
* target.h (struct target_ops) <supports_conditional_breakpoints>:
Remove. <supports_hardware_single_step>: New field.
(target_supports_conditional_breakpoints): Remove.
(target_supports_hardware_single_step): New macro.
(target_can_do_hardware_single_step): Declare.
* server.c (handle_query): Use target_supports_hardware_single_step
instead of target_supports_conditional_breakpoints.
Nowadays, when --wrapper is used, GDBserver skips extra traps/stops
in the wrapper program, and stops at the first instruction of the
program to be debugged. However, GDBserver created target description
in the first stop of inferior, and the executable of the inferior
is the wrapper program rather than the program to be debugged. In
this way, the target description can be wrong if the architectures
of wrapper program and program to be debugged are different. This
is shown by some fails in gdb.server/wrapper.exp on buildbot.
We are testing i686-linux GDB (Fedora-i686) on an x86_64-linux box
(fedora-x86-64-4) in buildbot, such configuration causes fails in
gdb.server/wrapper.exp like this:
spawn /home/gdb-buildbot-2/fedora-x86-64-4/fedora-i686/build/gdb/testsuite/../../gdb/gdbserver/gdbserver --once --wrapper env TEST=1 -- :2346 /home/gdb-buildbot-2/fedora-x86-64-4/fedora-i686/build/gdb/testsuite/outputs/gdb.server/wrapper/wrapper
Process /home/gdb-buildbot-2/fedora-x86-64-4/fedora-i686/build/gdb/testsuite/outputs/gdb.server/wrapper/wrapper created; pid = 8795
Can't debug 64-bit process with 32-bit GDBserver
Exiting
target remote localhost:2346
localhost:2346: Connection timed out.
(gdb) FAIL: gdb.server/wrapper.exp: setting breakpoint at marker
See https://sourceware.org/ml/gdb-testers/2015-q3/msg01541.html
In this case, program to be debugged ("wrapper") is 32-bit but wrapper
program ("/usr/bin/env") is 64-bit, so GDBserver gets the 64-bit
target description instead of 32-bit.
The root cause of this problem is that GDBserver creates target
description too early, and the rationale of fix could be creating
target description once the GDBserver skips extra traps and inferior
stops at the first instruction of the program we want to debug. IOW,
when GDBserver skips extra traps, the inferior's tdesc is NULL, and
mywait and its callees shouldn't use inferior's tdesc, so in this
patch, we skip code that requires register access, see changes in
linux_resume_one_lwp_throw and need_step_over_p.
In linux_low_filter_event, if target description isn't initialised and
GDBserver attached the process, we create target description immediately,
because GDBserver don't have to skip extra traps for attach, IOW, it
makes no sense to use --attach and --wrapper together. Otherwise, the
process is launched by GDBserver, we keep the status pending, and return.
After GDBserver skipped extra traps in start_inferior, we call a
target_ops hook arch_setup to initialise target description there.
gdb/gdbserver:
2015-07-24 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_arch_setup): New function.
(linux_low_filter_event): If proc->tdesc is NULL and
proc->attached is true, call the_low_target.arch_setup.
Otherwise, keep status pending, and return.
(linux_resume_one_lwp_throw): Don't call get_pc if
thread->while_stepping isn't NULL. Don't call
get_thread_regcache if proc->tdesc is NULL.
(need_step_over_p): Return 0 if proc->tdesc is NULL.
(linux_target_ops): Install arch_setup.
* server.c (start_inferior): Call the_target->arch_setup.
* target.h (struct target_ops) <arch_setup>: New field.
(target_arch_setup): New marco.
* lynx-low.c (lynx_target_ops): Update.
* nto-low.c (nto_target_ops): Update.
* spu-low.c (spu_target_ops): Update.
* win32-low.c (win32_target_ops): Update.
GDBserver steps over breakpoint if the condition is false, but if target
doesn't support hardware single step, the step over is very simple, if
not incorrect, in linux-arm-low.c:
/* We only place breakpoints in empty marker functions, and thread locking
is outside of the function. So rather than importing software single-step,
we can just run until exit. */
static CORE_ADDR
arm_reinsert_addr (void)
{
struct regcache *regcache = get_thread_regcache (current_thread, 1);
unsigned long pc;
collect_register_by_name (regcache, "lr", &pc);
return pc;
}
and linux-mips-low.c does the same. GDBserver sets a breakpoint at the
return address of the current function, resume and wait the program hits
the breakpoint in order to achieve "breakpoint step over". What if
program hits other user breakponits during this "step over"?
It is worse if the arm/thumb interworking is considered. Nowadays,
GDBserver arm backend unconditionally inserts arm breakpoint,
/* Define an ARM-mode breakpoint; we only set breakpoints in the C
library, which is most likely to be ARM. If the kernel supports
clone events, we will never insert a breakpoint, so even a Thumb
C library will work; so will mixing EABI/non-EABI gdbserver and
application. */
(const unsigned char *) &arm_breakpoint,
(const unsigned char *) &arm_eabi_breakpoint,
note that the comments are no longer valid as C library can be compiled
in thumb mode.
When GDBserver steps over a breakpoint in arm mode function, which
returns to thumb mode, GDBserver will insert arm mode breakpoint by
mistake and the program will crash. GDBserver alone is unable to
determine the arm/thumb mode given a PC address. See how GDB does
it in arm-tdep.c:arm_pc_is_thumb.
After thinking about how to teach GDBserver inserting right breakpoint
(arm or thumb) for a while, I reconsider it from a different direction
that it may be unreasonable to run target-side conditional breakpoint for
targets without hardware single step. Pedro also pointed this out here
https://sourceware.org/ml/gdb-patches/2015-04/msg00337.html
This patch is to add a new target_ops hook
supports_conditional_breakpoints, and only reply
";ConditionalBreakpoints+" if it is true. On linux targets,
supports_conditional_breakpoints returns true if target has hardware
single step, on other targets, (win32, lynx, nto, spu), set it to NULL,
because conditional breakpoint is a linux-specific feature.
gdb/gdbserver:
2015-05-08 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_supports_conditional_breakpoints): New
function.
(linux_target_ops): Install new target method.
* lynx-low.c (lynx_target_ops): Install NULL hook for
supports_conditional_breakpoints.
* nto-low.c (nto_target_ops): Likewise.
* spu-low.c (spu_target_ops): Likewise.
* win32-low.c (win32_target_ops): Likewise.
* server.c (handle_query): Check
target_supports_conditional_breakpoints.
* target.h (struct target_ops) <supports_conditional_breakpoints>:
New field.
(target_supports_conditional_breakpoints): New macro.
I forgot to update these target_ops instances when I added these new
hooks.
I confirmed mingw32-w64 builds again at least.
gdb/gdbserver/ChangeLog:
2015-03-05 Pedro Alves <palves@redhat.com>
* lynx-low.c (lynx_target_ops): Install NULL hooks for
stopped_by_sw_breakpoint, supports_stopped_by_sw_breakpoint,
stopped_by_hw_breakpoint, supports_stopped_by_hw_breakpoint.
* nto-low.c (nto_target_ops): Likewise.
* spu-low.c (spu_target_ops): Likewise.
* win32-low.c (win32_target_ops): Likewise.
GDB has a function named "current_inferior" and gdbserver has a global
variable named "current_inferior", but the two are not equivalent;
indeed, gdbserver does not have any real equivalent of what GDB calls
an inferior. What gdbserver's "current_inferior" is actually pointing
to is a structure describing the current thread. This commit renames
current_inferior as current_thread in gdbserver to clarify this. It
also renames the function "set_desired_inferior" to "set_desired_thread"
and renames various local variables from foo_inferior to foo_thread.
gdb/gdbserver/ChangeLog:
* inferiors.h (current_inferior): Renamed as...
(current_thread): New variable. All uses updated.
* linux-low.c (get_pc): Renamed saved_inferior as saved_thread.
(maybe_move_out_of_jump_pad): Likewise.
(cancel_breakpoint): Likewise.
(linux_low_filter_event): Likewise.
(wait_for_sigstop): Likewise.
(linux_resume_one_lwp): Likewise.
(need_step_over_p): Likewise.
(start_step_over): Likewise.
(linux_stabilize_threads): Renamed save_inferior as saved_thread.
* linux-x86-low.c (x86_linux_update_xmltarget): Likewise.
* proc-service.c (ps_lgetregs): Renamed reg_inferior as reg_thread
and save_inferior as saved_thread.
* regcache.c (get_thread_regcache): Renamed saved_inferior as
saved_thread.
(regcache_invalidate_thread): Likewise.
* remote-utils.c (prepare_resume_reply): Likewise.
* thread-db.c (thread_db_get_tls_address): Likewise.
(disable_thread_event_reporting): Likewise.
(remove_thread_event_breakpoints): Likewise.
* tracepoint.c (gdb_agent_about_to_close): Renamed save_inferior
as saved_thread.
* target.h (set_desired_inferior): Renamed as...
(set_desired_thread): New declaration. All uses updated.
* server.c (myresume): Updated comment to reference thread instead
of inferior.
(handle_serial_event): Likewise.
(handle_target_event): Likewise.
This commit moves the inclusion of stdarg.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include stdarg.h.
* defs.h: Do not include stdarg.h.
* ada-lang.c: Likewise.
* common/common-utils.h: Likewise.
* guile/scm-string.c: Likewise.
* guile/scm-utils.c: Likewise.
* m32c-tdep.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include stdarg.h.
* nto-low.c: Likewise.
This patch fixes hardware breakpoint regressions exposed by my fix for
"PR breakpoints/7143 - Watchpoint does not trigger when first set", at
https://sourceware.org/ml/gdb-patches/2014-03/msg00167.html
The testsuite caught them on Linux/x86_64, at least. gdb.sum:
gdb.sum:
FAIL: gdb.base/hbreak2.exp: next over recursive call
FAIL: gdb.base/hbreak2.exp: backtrace from factorial(5.1)
FAIL: gdb.base/hbreak2.exp: continue until exit at recursive next test
gdb.log:
(gdb) next
Program received signal SIGTRAP, Trace/breakpoint trap.
factorial (value=4) at ../../../src/gdb/testsuite/gdb.base/break.c:113
113 if (value > 1) { /* set breakpoint 7 here */
(gdb) FAIL: gdb.base/hbreak2.exp: next over recursive call
Actually, that patch just exposed a latent issue to "breakpoints
always-inserted off" mode, not really caused it. After that patch,
GDB no longer removes breakpoints at each internal event, thus making
some scenarios behave like breakpoint always-inserted on. The bug is
easy to trigger with always-inserted on.
The issue is that since the target-side breakpoint conditions support,
if the stub/server supports evaluating breakpoint conditions on the
target side, then GDB is sending duplicate Zx packets to the target
without removing them before, and GDBserver is not really expecting
that for Z packets other than Z0/z0. E.g., with "set breakpoint
always-inserted on" and "set debug remote 1":
(gdb) b main
Sending packet: $m410943,1#ff...Packet received: 48
Breakpoint 4 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028.
Sending packet: $Z0,410943,1#48...Packet received: OK
^^^^^^^^^^^^
(gdb) b main
Note: breakpoint 4 also set at pc 0x410943.
Sending packet: $m410943,1#ff...Packet received: 48
Breakpoint 5 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028.
Sending packet: $Z0,410943,1#48...Packet received: OK
^^^^^^^^^^^^
(gdb) b main
Note: breakpoints 4 and 5 also set at pc 0x410943.
Sending packet: $m410943,1#ff...Packet received: 48
Breakpoint 6 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028.
Sending packet: $Z0,410943,1#48...Packet received: OK
^^^^^^^^^^^^
(gdb) del
Delete all breakpoints? (y or n) y
Sending packet: $Z0,410943,1#48...Packet received: OK
Sending packet: $Z0,410943,1#48...Packet received: OK
Sending packet: $z0,410943,1#68...Packet received: OK
And for Z1, similarly:
(gdb) hbreak main
Sending packet: $m410943,1#ff...Packet received: 48
Hardware assisted breakpoint 4 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028.
Sending packet: $Z1,410943,1#49...Packet received: OK
^^^^^^^^^^^^
Packet Z1 (hardware-breakpoint) is supported
(gdb) hbreak main
Note: breakpoint 4 also set at pc 0x410943.
Sending packet: $m410943,1#ff...Packet received: 48
Hardware assisted breakpoint 5 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028.
Sending packet: $Z1,410943,1#49...Packet received: OK
^^^^^^^^^^^^
(gdb) hbreak main
Note: breakpoints 4 and 5 also set at pc 0x410943.
Sending packet: $m410943,1#ff...Packet received: 48
Hardware assisted breakpoint 6 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028.
Sending packet: $Z1,410943,1#49...Packet received: OK
^^^^^^^^^^^^
(gdb) del
Delete all breakpoints? (y or n) y
Sending packet: $Z1,410943,1#49...Packet received: OK
^^^^^^^^^^^^
Sending packet: $Z1,410943,1#49...Packet received: OK
^^^^^^^^^^^^
Sending packet: $z1,410943,1#69...Packet received: OK
^^^^^^^^^^^^
So GDB sent a bunch of Z1 packets, and then when finally removing the
breakpoint, only one z1 packet was sent. On the GDBserver side (with
monitor set debug-hw-points 1), in the Z1 case, we see:
$ ./gdbserver :9999 ./gdbserver
Process ./gdbserver created; pid = 8629
Listening on port 9999
Remote debugging from host 127.0.0.1
insert_watchpoint (addr=410943, len=1, type=instruction-execute):
CONTROL (DR7): 00000101 STATUS (DR6): 00000000
DR0: addr=0x410943, ref.count=1 DR1: addr=0x0, ref.count=0
DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0
insert_watchpoint (addr=410943, len=1, type=instruction-execute):
CONTROL (DR7): 00000101 STATUS (DR6): 00000000
DR0: addr=0x410943, ref.count=2 DR1: addr=0x0, ref.count=0
DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0
insert_watchpoint (addr=410943, len=1, type=instruction-execute):
CONTROL (DR7): 00000101 STATUS (DR6): 00000000
DR0: addr=0x410943, ref.count=3 DR1: addr=0x0, ref.count=0
DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0
insert_watchpoint (addr=410943, len=1, type=instruction-execute):
CONTROL (DR7): 00000101 STATUS (DR6): 00000000
DR0: addr=0x410943, ref.count=4 DR1: addr=0x0, ref.count=0
DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0
insert_watchpoint (addr=410943, len=1, type=instruction-execute):
CONTROL (DR7): 00000101 STATUS (DR6): 00000000
DR0: addr=0x410943, ref.count=5 DR1: addr=0x0, ref.count=0
DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0
remove_watchpoint (addr=410943, len=1, type=instruction-execute):
CONTROL (DR7): 00000101 STATUS (DR6): 00000000
DR0: addr=0x410943, ref.count=4 DR1: addr=0x0, ref.count=0
DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0
That's one insert_watchpoint call for each Z1 packet, and then one
remove_watchpoint call for the z1 packet. Notice how ref.count
increased for each insert_watchpoint call, and then in the end, after
GDB told GDBserver to forget about the hardware breakpoint, GDBserver
ends with the the first debug register still with ref.count=4! IOW,
the hardware breakpoint is left armed on the target, while on the GDB
end it's gone. If the program happens to execute 0x410943 afterwards,
then the CPU traps, GDBserver reports the trap to GDB, and GDB not
having a breakpoint set at that address anymore, reports to the user a
spurious SIGTRAP.
This is exactly what is happening in the hbreak2.exp test, though in
that case, it's a shared library event that triggers a
breakpoint_re_set, when breakpoints are still inserted (because
nowadays GDB doesn't remove breakpoints while handling internal
events), and that recreates breakpoint locations, which likewise
forces breakpoint reinsertion and Zx packet resends...
That is a lot of bogus Zx duplication that should possibly be
addressed on the GDB side. GDB resends Zx packets because the way to
change the target-side condition, is to resend the breakpoint to the
server with the new condition. (That's an option in the packet: e.g.,
"Z1,410943,1;X3,220027" for "hbreak main if 0". The packets in the
examples above are shorter because the breakpoints don't have
conditions attached). GDB doesn't remove the breakpoint first before
reinserting it because that'd be bad for non-stop, as it'd open a
window where the inferior could miss the breakpoint. The conditions
actually haven't changed between the resends, but GDB isn't smart
enough to realize that.
(TBC, if the target doesn't support target-side conditions, then GDB
doesn't trigger these resends (init_bp_location calls
mark_breakpoint_location_modified, and that does nothing if condition
evaluation is on the host side. The resends are caused by the
'loc->condition_changed = condition_modified.' line.)
But, even if GDB was made smarter, GDBserver should really still
handle the resends anyway. So target-side conditions also aren't
really to blame. The documentation of the Z/z packets says:
"To avoid potential problems with duplicate packets, the operations
should be implemented in an idempotent way."
As such, we may want to fix GDB, but we should definitely fix
GDBserver. The fix is a prerequisite for target-side conditions on
hardware breakpoints anyway (and while at it, on watchpoints too).
GDBserver indeed already treats duplicate Z0 packets in an idempotent
way. mem-break.c has the concept of high-level and low-level
breakpoints, somewhat similar to GDB's split of breakpoints vs
breakpoint locations, and keeps track of multiple breakpoints
referencing the same address/location, for the case of an internal
GDBserver breakpoint or a tracepoint being set at the same address as
a GDB breakpoint. But, it only allows GDB to ever contribute one
reference to a software breakpoint location. IOW, if gdbserver sees a
Z0 packet for the same address where it already had a GDB breakpoint
set, then GDBserver won't create another high-level GDB breakpoint.
However, mem-break.c only tracks GDB Z0 breakpoints. The same logic
should apply to all kinds of Zx packets. Currently, gdbserver passes
down each duplicate Zx (other than Z0) request directly to the
target->insert_point routine. The x86 watchpoint support itself
refcounts watchpoint / hw breakpoint requests, to handle overlapping
watchpoints, and save debug registers. But that code doesn't (and
really shouldn't) handle the duplicate requests, assuming that for
each insert there will be a corresponding remove.
So the fix is to generalize mem-break.c to track all kinds of Zx
breakpoints, and filter out duplicates. As mentioned, this ends up
adding support for target-side conditions on hardware breakpoints and
watchpoints too (though GDB itself doesn't support the latter yet).
Probably the least obvious change in the patch is that it kind of
turns the breakpoint insert/remove APIs inside out. Before, the
target methods were only called for GDB breakpoints. The internal
breakpoint set/delete methods inserted memory breakpoints directly
bypassing the insert/remove target methods. That's not good when the
target should use a debug API to set software breakpoints, instead of
relying on GDBserver patching memory with breakpoint instructions, as
is the case of NTO.
Now removal/insertion of all kinds of breakpoints/watchpoints, either
internal, or from GDB, always go through the target methods. The
insert_point/remove_point methods no longer get passed a Z packet
type, but an internal/raw breakpoint type. They're also passed a
pointer to the raw breakpoint itself (note that's still opaque outside
mem-break.c), so that insert_memory_breakpoint /
remove_memory_breakpoint have access to the breakpoint's shadow
buffer. I first tried passing down a new structure based on GDB's
"struct bp_target_info" (actually with that name exactly), but then
decided against it as unnecessary complication.
As software/memory breakpoints work by poking at memory, when setting
a GDB Z0 breakpoint (but not internal breakpoints, as those can assume
the conditions are already right), we need to tell the target to
prepare to access memory (which on Linux means stop threads). If that
operation fails, we need to return error to GDB. Seeing an error, if
this is the first breakpoint of that type that GDB tries to insert,
GDB would then assume the breakpoint type is supported, but it may
actually not be. So we need to check whether the type is supported at
all before preparing to access memory. And to solve that, the patch
adds a new target->supports_z_point_type method that is called before
actually trying to insert the breakpoint.
Other than that, hopefully the change is more or less obvious.
New test added that exercises the hbreak2.exp regression in a more
direct way, without relying on a breakpoint re-set happening before
main is reached.
Tested by building GDBserver for:
aarch64-linux-gnu
arm-linux-gnueabihf
i686-pc-linux-gnu
i686-w64-mingw32
m68k-linux-gnu
mips-linux-gnu
mips-uclinux
nios2-linux-gnu
powerpc-linux-gnu
sh-linux-gnu
tilegx-unknown-linux-gnu
x86_64-redhat-linux
x86_64-w64-mingw32
And also regression tested on x86_64 Fedora 20.
gdb/gdbserver/
2014-05-20 Pedro Alves <palves@redhat.com>
* linux-aarch64-low.c (aarch64_insert_point)
(aarch64_remove_point): No longer check whether the type is
supported here. Adjust to new interface.
(the_low_target): Install aarch64_supports_z_point_type as
supports_z_point_type method.
* linux-arm-low.c (raw_bkpt_type_to_arm_hwbp_type): New function.
(arm_linux_hw_point_initialize): Take an enum raw_bkpt_type
instead of a Z packet char. Adjust.
(arm_supports_z_point_type): New function.
(arm_insert_point, arm_remove_point): Adjust to new interface.
(the_low_target): Install arm_supports_z_point_type.
* linux-crisv32-low.c (cris_supports_z_point_type): New function.
(cris_insert_point, cris_remove_point): Adjust to new interface.
Don't check whether the type is supported here.
(the_low_target): Install cris_supports_z_point_type.
* linux-low.c (linux_supports_z_point_type): New function.
(linux_insert_point, linux_remove_point): Adjust to new interface.
* linux-low.h (struct linux_target_ops) <insert_point,
remove_point>: Take an enum raw_bkpt_type instead of a char. Add
raw_breakpoint pointer parameter.
<supports_z_point_type>: New method.
* linux-mips-low.c (mips_supports_z_point_type): New function.
(mips_insert_point, mips_remove_point): Adjust to new interface.
Use mips_supports_z_point_type.
(the_low_target): Install mips_supports_z_point_type.
* linux-ppc-low.c (the_low_target): Install NULL as
supports_z_point_type method.
* linux-s390-low.c (the_low_target): Install NULL as
supports_z_point_type method.
* linux-sparc-low.c (the_low_target): Install NULL as
supports_z_point_type method.
* linux-x86-low.c (x86_supports_z_point_type): New function.
(x86_insert_point): Adjust to new insert_point interface. Use
insert_memory_breakpoint. Adjust to new
i386_low_insert_watchpoint interface.
(x86_remove_point): Adjust to remove_point interface. Use
remove_memory_breakpoint. Adjust to new
i386_low_remove_watchpoint interface.
(the_low_target): Install x86_supports_z_point_type.
* lynx-low.c (lynx_target_ops): Install NULL as
supports_z_point_type callback.
* nto-low.c (nto_supports_z_point_type): New.
(nto_insert_point, nto_remove_point): Adjust to new interface.
(nto_target_ops): Install nto_supports_z_point_type.
* mem-break.c: Adjust intro comment.
(struct raw_breakpoint) <raw_type, size>: New fields.
<inserted>: Update comment.
<shlib_disabled>: Delete field.
(enum bkpt_type) <gdb_breakpoint>: Delete value.
<gdb_breakpoint_Z0, gdb_breakpoint_Z1, gdb_breakpoint_Z2,
gdb_breakpoint_Z3, gdb_breakpoint_Z4>: New values.
(raw_bkpt_type_to_target_hw_bp_type): New function.
(find_enabled_raw_code_breakpoint_at): New function.
(find_raw_breakpoint_at): New type and size parameters. Use them.
(insert_memory_breakpoint): New function, based off
set_raw_breakpoint_at.
(remove_memory_breakpoint): New function.
(set_raw_breakpoint_at): Reimplement.
(set_breakpoint): New, based on set_breakpoint_at.
(set_breakpoint_at): Reimplement.
(delete_raw_breakpoint): Go through the_target->remove_point
instead of assuming memory breakpoints.
(find_gdb_breakpoint_at): Delete.
(Z_packet_to_bkpt_type, Z_packet_to_raw_bkpt_type): New functions.
(find_gdb_breakpoint): New function.
(set_gdb_breakpoint_at): Delete.
(z_type_supported): New function.
(set_gdb_breakpoint_1): New function, loosely based off
set_gdb_breakpoint_at.
(check_gdb_bp_preconditions, set_gdb_breakpoint): New functions.
(delete_gdb_breakpoint_at): Delete.
(delete_gdb_breakpoint_1): New function, loosely based off
delete_gdb_breakpoint_at.
(delete_gdb_breakpoint): New function.
(clear_gdb_breakpoint_conditions): Rename to ...
(clear_breakpoint_conditions): ... this. Don't handle a NULL
breakpoint.
(add_condition_to_breakpoint): Make static.
(add_breakpoint_condition): Take a struct breakpoint pointer
instead of an address. Adjust.
(gdb_condition_true_at_breakpoint): Rename to ...
(gdb_condition_true_at_breakpoint_z_type): ... this, and add
z_type parameter.
(gdb_condition_true_at_breakpoint): Reimplement.
(add_breakpoint_commands): Take a struct breakpoint pointer
instead of an address. Adjust.
(gdb_no_commands_at_breakpoint): Rename to ...
(gdb_no_commands_at_breakpoint_z_type): ... this. Add z_type
parameter. Return true if no breakpoint was found. Change debug
output.
(gdb_no_commands_at_breakpoint): Reimplement.
(run_breakpoint_commands): Rename to ...
(run_breakpoint_commands_z_type): ... this. Add z_type parameter,
and change return type to boolean.
(run_breakpoint_commands): New function.
(gdb_breakpoint_here): Also check for Z1 breakpoints.
(uninsert_raw_breakpoint): Don't try to reinsert a disabled
breakpoint. Go through the_target->remove_point instead of
assuming memory breakpoint.
(uninsert_breakpoints_at, uninsert_all_breakpoints): Uninsert
software and hardware breakpoints.
(reinsert_raw_breakpoint): Go through the_target->insert_point
instead of assuming memory breakpoint.
(reinsert_breakpoints_at, reinsert_all_breakpoints): Reinsert
software and hardware breakpoints.
(check_breakpoints, breakpoint_here, breakpoint_inserted_here):
Check both software and hardware breakpoints.
(validate_inserted_breakpoint): Assert the breakpoint is a
software breakpoint. Set the inserted flag to -1 instead of
setting shlib_disabled.
(delete_disabled_breakpoints): Adjust.
(validate_breakpoints): Only validate software breakpoints.
Adjust to inserted flag change.
(check_mem_read, check_mem_write): Skip breakpoint types other
than software breakpoints. Adjust to inserted flag change.
* mem-break.h (enum raw_bkpt_type): New enum.
(raw_breakpoint, struct process_info): Forward declare.
(Z_packet_to_target_hw_bp_type): Delete declaration.
(raw_bkpt_type_to_target_hw_bp_type, Z_packet_to_raw_bkpt_type)
(set_gdb_breakpoint, delete_gdb_breakpoint)
(clear_breakpoint_conditions): New declarations.
(set_gdb_breakpoint_at, clear_gdb_breakpoint_conditions): Delete.
(breakpoint_inserted_here): Update comment.
(add_breakpoint_condition, add_breakpoint_commands): Replace
address parameter with a breakpoint pointer parameter.
(gdb_breakpoint_here): Update comment.
(delete_gdb_breakpoint_at): Delete.
(insert_memory_breakpoint, remove_memory_breakpoint): Declare.
* server.c (process_point_options): Take a struct breakpoint
pointer instead of an address. Adjust.
(process_serial_event) <Z/z packets>: Use set_gdb_breakpoint and
delete_gdb_breakpoint.
* spu-low.c (spu_target_ops): Install NULL as
supports_z_point_type method.
* target.h: Include mem-break.h.
(struct target_ops) <prepare_to_access_memory>: Update comment.
<supports_z_point_type>: New field.
<insert_point, remove_point>: Take an enum raw_bkpt_type argument
instead of a char. Also take a raw breakpoint pointer.
* win32-arm-low.c (the_low_target): Install NULL as
supports_z_point_type.
* win32-i386-low.c (i386_supports_z_point_type): New function.
(i386_insert_point, i386_remove_point): Adjust to new interface.
(the_low_target): Install i386_supports_z_point_type.
* win32-low.c (win32_supports_z_point_type): New function.
(win32_insert_point, win32_remove_point): Adjust to new interface.
(win32_target_ops): Install win32_supports_z_point_type.
* win32-low.h (struct win32_target_ops):
<supports_z_point_type>: New method.
<insert_point, remove_point>: Take an enum raw_bkpt_type argument
instead of a char. Also take a raw breakpoint pointer.
gdb/testsuite/
2014-05-20 Pedro Alves <palves@redhat.com>
* gdb.base/break-idempotent.c: New file.
* gdb.base/break-idempotent.exp: New file.
This patch makes GDBserver support multi-process + biarch.
Currently, if you're debugging more than one process at once with a
single gdbserver (in extended-remote mode), then all processes must
have the same architecture (e.g., 64-bit vs 32-bit). Otherwise, you
see this:
Added inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
Reading symbols from /home/pedro/gdb/tests/main32...done.
Temporary breakpoint 2 at 0x4004cf: main. (2 locations)
Starting program: /home/pedro/gdb/tests/main32
warning: Selected architecture i386 is not compatible with reported target architecture i386:x86-64
warning: Architecture rejected target-supplied description
Remote 'g' packet reply is too long: 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000090cfffff0000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000000000000000b042f7460000000000020000230000002b0000002b0000002b000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000007f03000000000000ffff0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000801f00003b0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
... etc, etc ...
Even though the process was running a 32-bit program, GDBserver sent
back to GDB a register set in 64-bit layout.
A patch (http://sourceware.org/ml/gdb-patches/2012-11/msg00228.html) a
while ago made GDB track a target_gdbarch per inferior, and as
consequence, fetch a target description per-inferior. This patch is
the GDBserver counterpart, that makes GDBserver keep track of each
process'es XML target description and register layout. So in the
example above, GDBserver will send the correct register set in 32-bit
layout to GDB.
A new "struct target_desc" object (tdesc for short) is added, that
holds the target description and register layout information about
each process. Each `struct process_info' holds a pointer to a target
description. The regcache also gains a pointer to a target
description, mainly for convenience, and parallel with GDB (and
possible future support for programs that flip processor modes).
The low target's arch_setup routines are responsible for setting the
process'es correct tdesc. This isn't that much different to how
things were done before, except that instead of detecting the inferior
process'es architecture and calling the corresponding
init_registers_FOO routine, which would change the regcache layout
globals and recreate the threads' regcaches, the regcache.c globals
are gone, and the init_registers_$BAR routines now each initialize a
separate global struct target_desc object (one for each arch variant
GDBserver supports), and so all the init_registers_$BAR routines that
are built into GDBserver are called early at GDBserver startup time
(similarly to how GDB handles its built-in target descriptions), and
then the arch_setup routine is responsible for making
process_info->tdesc point to one of these target description globals.
The regcache module is all parameterized to get the regcache's layout
from the tdesc object instead of the old register_bytes, etc. globals.
The threads' regcaches are now created lazily. The old scheme where
we created each of them when we added a new thread doesn't work
anymore, because we add the main thread/lwp before we see it stop for
the first time, and it is only when we see the thread stop for the
first time that we have a chance of determining the inferior's
architecture (through the_low_target.arch_setup). Therefore when we
add the main thread we don't know which architecture/tdesc its
regcache should have.
This patch makes the gdb.multi/multi-arch.exp test now pass against
(extended-remote) GDBserver. It currently fails, without this patch.
The IPA also uses the regcache, so it gains a new global struct
target_desc pointer, which points at the description of the process it
is loaded in.
Re. the linux-low.c & friends changes. Since the register map
etc. may differ between processes (64-bit vs 32-bit) etc., the
linux_target_ops num_regs, regmap and regset_bitmap data fields are no
longer sufficient. A new method is added in their place that returns
a pointer to a new struct that includes all info linux-low.c needs to
access registers of the current inferior.
The patch/discussion that originally introduced
linux-low.c:disabled_regsets mentions that the disabled_regsets set
may be different per mode (in a biarch setup), and indeed that is
cleared whenever we start a new (first) inferior, so that global is
moved as well behind the new `struct regs_info'.
On the x86 side:
I simply replaced the i387-fp.c:num_xmm_registers global with a check
for 64-bit or 32-bit process, which is equivalent to how the global
was set. This avoided coming up with some more general mechanism that
would work for all targets that use this module (GNU/Linux, Windows,
etc.).
Tested:
GNU/Linux IA64
GNU/Linux MIPS64
GNU/Linux PowerPC (Fedora 16)
GNU/Linux s390x (Fedora 16)
GNU/Linux sparc64 (Debian)
GNU/Linux x86_64, -m64 and -m32 (Fedora 17)
Cross built, and smoke tested:
i686-w64-mingw32, under Wine.
GNU/Linux TI C6x, by Yao Qi.
Cross built but otherwise not tested:
aarch64-linux-gnu
arm-linux-gnu
m68k-linux
nios2-linux-gnu
sh-linux-gnu
spu
tilegx-unknown-linux-gnu
Completely untested:
GNU/Linux Blackfin
GNU/Linux CRIS
GNU/Linux CRISv32
GNU/Linux TI Xtensa
GNU/Linux M32R
LynxOS
QNX NTO
gdb/gdbserver/
2013-06-07 Pedro Alves <palves@redhat.com>
* Makefile.in (OBS): Add tdesc.o.
(IPA_OBJS): Add tdesc-ipa.o.
(tdesc-ipa.o): New rule.
* ax.c (gdb_eval_agent_expr): Adjust register_size call to new
interface.
* linux-low.c (new_inferior): Delete.
(disabled_regsets, num_regsets): Delete.
(linux_add_process): Adjust to set the new per-process
new_inferior flag.
(linux_detach_one_lwp): Adjust to call regcache_invalidate_thread.
(linux_wait_for_lwp): Adjust. Only call arch_setup if the event
was a stop. When calling arch_setup, switch the current inferior
to the thread that got an event.
(linux_resume_one_lwp): Adjust to call regcache_invalidate_thread.
(regsets_fetch_inferior_registers)
(regsets_store_inferior_registers): New regsets_info parameter.
Adjust to use it.
(linux_register_in_regsets): New regs_info parameter. Adjust to
use it.
(register_addr, fetch_register, store_register): New usrregs_info
parameter. Adjust to use it.
(usr_fetch_inferior_registers, usr_store_inferior_registers): New
parameter regs_info. Adjust to use it.
(linux_fetch_registers): Get the current inferior's regs_info, and
adjust to use it.
(linux_store_registers): Ditto.
[HAVE_LINUX_REGSETS] (initialize_regsets_info): New.
(initialize_low): Don't initialize the target_regsets here. Call
initialize_low_arch.
* linux-low.h (target_regsets): Delete declaration.
(struct regsets_info): New.
(struct usrregs_info): New.
(struct regs_info): New.
(struct process_info_private) <new_inferior>: New field.
(struct linux_target_ops): Delete the num_regs, regmap, and
regset_bitmap fields. New field regs_info.
[HAVE_LINUX_REGSETS] (initialize_regsets_info): Declare.
* i387-fp.c (num_xmm_registers): Delete.
(i387_cache_to_fsave, i387_fsave_to_cache): Adjust find_regno
calls to new interface.
(i387_cache_to_fxsave, i387_cache_to_xsave, i387_fxsave_to_cache)
(i387_xsave_to_cache): Adjust find_regno calls to new interface.
Infer the number of xmm registers from the regcache's target
description.
* i387-fp.h (num_xmm_registers): Delete.
* inferiors.c (add_thread): Don't install the thread's regcache
here.
* proc-service.c (gregset_info): Fetch the current inferior's
regs_info. Adjust to use it.
* regcache.c: Include tdesc.h.
(register_bytes, reg_defs, num_registers)
(gdbserver_expedite_regs): Delete.
(get_thread_regcache): If the thread doesn't have a regcache yet,
create one, instead of aborting gdbserver.
(regcache_invalidate_one): Rename to ...
(regcache_invalidate_thread): ... this.
(regcache_invalidate_one): New.
(regcache_invalidate): Only invalidate registers of the current
process.
(init_register_cache): Add target_desc parameter, and use it.
(new_register_cache): Ditto. Assert the target description has a
non zero registers_size.
(regcache_cpy): Add assertions. Adjust.
(realloc_register_cache, set_register_cache): Delete.
(registers_to_string, registers_from_string): Adjust.
(find_register_by_name, find_regno, find_register_by_number)
(register_cache_size): Add target_desc parameter, and use it.
(free_register_cache_thread, free_register_cache_thread_one)
(regcache_release, register_cache_size): New.
(register_size): Add target_desc parameter, and use it.
(register_data, supply_register, supply_register_zeroed)
(supply_regblock, supply_register_by_name, collect_register)
(collect_register_as_string, collect_register_by_name): Adjust.
* regcache.h (struct target_desc): Forward declare.
(struct regcache) <tdesc>: New field.
(init_register_cache, new_register_cache): Add target_desc
parameter.
(regcache_invalidate_thread): Declare.
(regcache_invalidate_one): Delete declaration.
(regcache_release): Declare.
(find_register_by_number, register_cache_size, register_size)
(find_regno): Add target_desc parameter.
(gdbserver_expedite_regs, gdbserver_xmltarget): Delete
declarations.
* remote-utils.c: Include tdesc.h.
(outreg, prepare_resume_reply): Adjust.
* server.c: Include tdesc.h.
(gdbserver_xmltarget): Delete declaration.
(get_features_xml, process_serial_event): Adjust.
* server.h [IN_PROCESS_AGENT] (struct target_desc): Forward
declare.
(struct process_info) <tdesc>: New field.
(ipa_tdesc): Declare.
* tdesc.c: New file.
* tdesc.h: New file.
* tracepoint.c: Include tdesc.h.
[IN_PROCESS_AGENT] (ipa_tdesc): Define.
(get_context_regcache): Adjust to pass ipa_tdesc down.
(do_action_at_tracepoint): Adjust to get the register cache size
from the context regcache's description.
(traceframe_walk_blocks): Adjust to get the register cache size
from the current trace frame's description.
(traceframe_get_pc): Adjust to get current trace frame's
description and pass it down.
(gdb_collect): Adjust to get the register cache size from the
IPA's description.
* linux-amd64-ipa.c (tdesc_amd64_linux): Declare.
(gdbserver_xmltarget): Delete.
(initialize_low_tracepoint): Set the ipa's target description.
* linux-i386-ipa.c (tdesc_i386_linux): Declare.
(initialize_low_tracepoint): Set the ipa's target description.
* linux-x86-low.c: Include tdesc.h.
[__x86_64__] (is_64bit_tdesc): New.
(ps_get_thread_area, x86_get_thread_area): Use it.
(i386_cannot_store_register): Rename to ...
(x86_cannot_store_register): ... this. Use is_64bit_tdesc.
(i386_cannot_fetch_register): Rename to ...
(x86_cannot_fetch_register): ... this. Use is_64bit_tdesc.
(x86_fill_gregset, x86_store_gregset): Adjust register_size calls
to new interface.
(target_regsets): Rename to ...
(x86_regsets): ... this.
(x86_get_pc, x86_set_pc): Adjust register_size calls to new
interface.
(x86_siginfo_fixup): Use is_64bit_tdesc.
[__x86_64__] (tdesc_amd64_linux, tdesc_amd64_avx_linux)
(tdesc_x32_avx_linux, tdesc_x32_linux)
(tdesc_i386_linux, tdesc_i386_mmx_linux, tdesc_i386_avx_linux):
Declare.
(x86_linux_update_xmltarget): Delete.
(I386_LINUX_XSAVE_XCR0_OFFSET): Define.
(have_ptrace_getfpxregs, have_ptrace_getregset): New.
(AMD64_LINUX_USER64_CS): New.
(x86_linux_read_description): New, based on
x86_linux_update_xmltarget.
(same_process_callback): New.
(x86_arch_setup_process_callback): New.
(x86_linux_update_xmltarget): New.
(x86_regsets_info): New.
(amd64_linux_regs_info): New.
(i386_linux_usrregs_info): New.
(i386_linux_regs_info): New.
(x86_linux_regs_info): New.
(x86_arch_setup): Reimplement.
(x86_install_fast_tracepoint_jump_pad): Use is_64bit_tdesc.
(x86_emit_ops): Ditto.
(the_low_target): Adjust. Install x86_linux_regs_info,
x86_cannot_fetch_register, and x86_cannot_store_register.
(initialize_low_arch): New.
* linux-ia64-low.c (tdesc_ia64): Declare.
(ia64_fetch_register): Adjust.
(ia64_usrregs_info, regs_info): New globals.
(ia64_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-sparc-low.c (tdesc_sparc64): Declare.
(sparc_fill_gregset_to_stack, sparc_store_gregset_from_stack):
Adjust.
(sparc_arch_setup): New function.
(sparc_regsets_info, sparc_usrregs_info, regs_info): New globals.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-ppc-low.c (tdesc_powerpc_32l, tdesc_powerpc_altivec32l)
(tdesc_powerpc_cell32l, tdesc_powerpc_vsx32l)
(tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l)
(tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_e500l)
(tdesc_powerpc_64l, tdesc_powerpc_altivec64l)
(tdesc_powerpc_cell64l, tdesc_powerpc_vsx64l)
(tdesc_powerpc_isa205_64l, tdesc_powerpc_isa205_altivec64l)
(tdesc_powerpc_isa205_vsx64l): Declare.
(ppc_cannot_store_register, ppc_collect_ptrace_register)
(ppc_supply_ptrace_register, parse_spufs_run, ppc_get_pc)
(ppc_set_pc, ppc_get_hwcap): Adjust.
(ppc_usrregs_info): Forward declare.
(!__powerpc64__) ppc_regmap_adjusted: New global.
(ppc_arch_setup): Adjust to the current process'es target
description.
(ppc_fill_vsxregset, ppc_store_vsxregset, ppc_fill_vrregset)
(ppc_store_vrregset, ppc_fill_evrregset, ppc_store_evrregse)
(ppc_store_evrregset): Adjust.
(target_regsets): Rename to ...
(ppc_regsets): ... this, and make static.
(ppc_usrregs_info, ppc_regsets_info, regs_info): New globals.
(ppc_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-s390-low.c (tdesc_s390_linux32, tdesc_s390_linux32v1)
(tdesc_s390_linux32v2, tdesc_s390_linux64, tdesc_s390_linux64v1)
(tdesc_s390_linux64v2, tdesc_s390x_linux64, tdesc_s390x_linux64v1)
(tdesc_s390x_linux64v2): Declare.
(s390_collect_ptrace_register, s390_supply_ptrace_register)
(s390_fill_gregset, s390_store_last_break): Adjust.
(target_regsets): Rename to ...
(s390_regsets): ... this, and make static.
(s390_get_pc, s390_set_pc): Adjust.
(s390_get_hwcap): New target_desc parameter, and use it.
[__s390x__] (have_hwcap_s390_high_gprs): New global.
(s390_arch_setup): Adjust to set the current process'es target
description. Don't adjust the regmap.
(s390_usrregs_info, s390_regsets_info, regs_info): New globals.
[__s390x__] (s390_usrregs_info_3264, s390_regsets_info_3264)
(regs_info_3264): New globals.
(s390_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-mips-low.c (tdesc_mips_linux, tdesc_mips_dsp_linux)
(tdesc_mips64_linux, tdesc_mips64_dsp_linux): Declare.
[__mips64] (init_registers_mips_linux)
(init_registers_mips_dsp_linux): Delete defines.
[__mips64] (tdesc_mips_linux, tdesc_mips_dsp_linux): New defines.
(have_dsp): New global.
(mips_read_description): New, based on mips_arch_setup.
(mips_arch_setup): Reimplement.
(get_usrregs_info): New function.
(mips_cannot_fetch_register, mips_cannot_store_register)
(mips_get_pc, mips_set_pc, mips_fill_gregset, mips_store_gregset)
(mips_fill_fpregset, mips_store_fpregset): Adjust.
(target_regsets): Rename to ...
(mips_regsets): ... this, and make static.
(mips_regsets_info, mips_dsp_usrregs_info, mips_usrregs_info)
(dsp_regs_info, regs_info): New globals.
(mips_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-arm-low.c (tdesc_arm, tdesc_arm_with_iwmmxt)
(tdesc_arm_with_vfpv2, tdesc_arm_with_vfpv3, tdesc_arm_with_neon):
Declare.
(arm_fill_vfpregset, arm_store_vfpregset): Adjust.
(arm_read_description): New, with bits factored from
arm_arch_setup.
(arm_arch_setup): Reimplement.
(target_regsets): Rename to ...
(arm_regsets): ... this, and make static.
(arm_regsets_info, arm_usrregs_info, regs_info): New globals.
(arm_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-m68k-low.c (tdesc_m68k): Declare.
(target_regsets): Rename to ...
(m68k_regsets): ... this, and make static.
(m68k_regsets_info, m68k_usrregs_info, regs_info): New globals.
(m68k_regs_info): New function.
(m68k_arch_setup): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-sh-low.c (tdesc_sharch): Declare.
(target_regsets): Rename to ...
(sh_regsets): ... this, and make static.
(sh_regsets_info, sh_usrregs_info, regs_info): New globals.
(sh_regs_info, sh_arch_setup): New functions.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-bfin-low.c (tdesc_bfin): Declare.
(bfin_arch_setup): New function.
(bfin_usrregs_info, regs_info): New globals.
(bfin_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-cris-low.c (tdesc_cris): Declare.
(cris_arch_setup): New function.
(cris_usrregs_info, regs_info): New globals.
(cris_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-cris-low.c (tdesc_crisv32): Declare.
(cris_arch_setup): New function.
(cris_regsets_info, cris_usrregs_info, regs_info): New globals.
(cris_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-m32r-low.c (tdesc_m32r): Declare.
(m32r_arch_setup): New function.
(m32r_usrregs_info, regs_info): New globals.
(m32r_regs_info): Adjust.
(initialize_low_arch): New function.
* linux-tic6x-low.c (tdesc_tic6x_c64xp_linux)
(tdesc_tic6x_c64x_linux, tdesc_tic6x_c62x_linux): Declare.
(tic6x_usrregs_info): Forward declare.
(tic6x_read_description): New function, based on ...
(tic6x_arch_setup): ... this. Reimplement.
(target_regsets): Rename to ...
(tic6x_regsets): ... this, and make static.
(tic6x_regsets_info, tic6x_usrregs_info, regs_info): New globals.
(tic6x_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-xtensa-low.c (tdesc_xtensa): Declare.
(xtensa_fill_gregset, xtensa_store_gregset): Adjust.
(target_regsets): Rename to ...
(xtensa_regsets): ... this, and make static.
(xtensa_regsets_info, xtensa_usrregs_info, regs_info): New
globals.
(xtensa_arch_setup, xtensa_regs_info): New functions.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-nios2-low.c (tdesc_nios2_linux): Declare.
(nios2_arch_setup): Set the current process'es tdesc.
(target_regsets): Rename to ...
(nios2_regsets): ... this.
(nios2_regsets_info, nios2_usrregs_info, regs_info): New globals.
(nios2_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-aarch64-low.c (tdesc_aarch64): Declare.
(aarch64_arch_setup): Set the current process'es tdesc.
(target_regsets): Rename to ...
(aarch64_regsets): ... this.
(aarch64_regsets_info, aarch64_usrregs_info, regs_info): New globals.
(aarch64_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-tile-low.c (tdesc_tilegx, tdesc_tilegx32): Declare
globals.
(target_regsets): Rename to ...
(tile_regsets): ... this.
(tile_regsets_info, tile_usrregs_info, regs_info): New globals.
(tile_regs_info): New function.
(tile_arch_setup): Set the current process'es tdesc.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* spu-low.c (tdesc_spu): Declare.
(spu_create_inferior, spu_attach): Set the new process'es tdesc.
* win32-arm-low.c (tdesc_arm): Declare.
(arm_arch_setup): New function.
(the_low_target): Install arm_arch_setup instead of
init_registers_arm.
* win32-i386-low.c (tdesc_i386, tdesc_amd64): Declare.
(init_windows_x86): Rename to ...
(i386_arch_setup): ... this. Set `win32_tdesc'.
(the_low_target): Adjust.
* win32-low.c (win32_tdesc): New global.
(child_add_thread): Don't create the thread cache here.
(do_initial_child_stuff): Set the new process'es tdesc.
* win32-low.h (struct target_desc): Forward declare.
(win32_tdesc): Declare.
* lynx-i386-low.c (tdesc_i386): Declare global.
(lynx_i386_arch_setup): Set `lynx_tdesc'.
* lynx-low.c (lynx_tdesc): New global.
(lynx_add_process): Set the new process'es tdesc.
* lynx-low.h (struct target_desc): Forward declare.
(lynx_tdesc): Declare global.
* lynx-ppc-low.c (tdesc_powerpc_32): Declare global.
(lynx_ppc_arch_setup): Set `lynx_tdesc'.
* nto-low.c (nto_tdesc): New global.
(do_attach): Set the new process'es tdesc.
* nto-low.h (struct target_desc): Forward declare.
(nto_tdesc): Declare.
* nto-x86-low.c (tdesc_i386): Declare.
(nto_x86_arch_setup): Set `nto_tdesc'.
gdb/
2013-06-07 Pedro Alves <palves@redhat.com>
* regformats/regdat.sh: Output #include tdesc.h. Make globals
static. Output a global target description pointer.
(init_registers_${name}): Adjust to initialize a
target description structure.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
snprintf is not available on LynxOS, so I changed the calls to snprintf
to calls to xsnprintf, which should be strictly equivalent.
gdb/gdbserver/ChangeLog:
* utils.c (xsnprintf): Make non-static.
* server.h: Add xsnprintf declaration.
* linux-low.c, nto-low.c, target.c, thread-db.c, tracepoint.c:
replace calls to snprintf by calls to xsnprintf throughout.
* linux-low.c (linux_remove_process): Delete.
(add_lwp): Don't set last_resume_kind here.
(linux_kill): Use `mourn'.
(linux_detach): Use `thread_db_detach', and `mourn'.
(linux_mourn): New.
(linux_attach_lwp_1): Adjust comment.
(linux_attach): last_resume_kind moved the thread_info; adjust.
(status_pending_p_callback): Adjust.
(linux_wait_for_event_1): Adjust.
(count_events_callback, select_singlestep_lwp_callback)
(select_event_lwp_callback, cancel_breakpoints_callback)
(db_wants_lwp_stopped, linux_wait_1, need_step_over_p)
(proceed_one_lwp): Adjust.
(linux_async): Add debug output.
(linux_thread_stopped): New.
(linux_pause_all): New.
(linux_target_ops): Install linux_mourn, linux_thread_stopped and
linux_pause_all.
* linux-low.h (struct lwp_info): Delete last_resume_kind field.
(thread_db_free): Delete declaration.
(thread_db_detach, thread_db_mourn): Declare.
* thread-db.c (thread_db_init): Use thread_db_mourn.
(thread_db_free): Delete, split in two.
(disable_thread_event_reporting): New.
(thread_db_detach): New.
(thread_db_mourn): New.
* server.h (struct thread_info) <last_resume_kind>: New field.
<attached>: Add comment.
<gdb_detached>: New field.
(handler_func): Change return type to int.
(handle_serial_event, handle_target_event): Ditto.
(gdb_connected): Declare.
(tracing): Delete.
(disconnected_tracing): Declare.
(stop_tracing): Declare.
* server.c (handle_query) <qSupported>: Report support for
disconnected tracing.
(queue_stop_reply_callback): Account for running threads.
(gdb_wants_thread_stopped): New.
(gdb_wants_all_threads_stopped): New.
(gdb_reattached_process): New.
(handle_status): Clear the `gdb_detached' flag of all processes.
In all-stop, stop all threads.
(main): Be sure to leave tfind mode. Handle disconnected tracing.
(process_serial_event): If the remote connection breaks, or if an
exit was forced with "monitor exit", force an event loop exit.
Handle disconnected tracing on detach.
(handle_serial_event): Adjust.
(handle_target_event): If GDB isn't connected, forward events back
to the inferior, unless the last process exited, in which case,
exit gdbserver. Adjust interface.
* remote-utils.c (remote_open): Don't block in accept. Instead
register an event loop source on the listen socket file
descriptor. Refactor bits into ...
(listen_desc): ... this new global.
(gdb_connected): ... this new function.
(enable_async_notification): ... this new function.
(handle_accept_event): ... this new function.
(remote_close): Clear remote_desc.
* inferiors.c (add_thread): Set the new thread's last_resume_kind.
* target.h (struct target_ops) <mourn, thread_stopped, pause_all>:
New fields.
(mourn_inferior): Define.
(target_process_qsupported): Avoid the dangling else problem.
(thread_stopped): Define.
(pause_all): Define.
(target_waitstatus_to_string): Declare.
* target.c (target_waitstatus_to_string): New.
* tracepoint.c (tracing): Make extern.
(disconnected_tracing): New.
(stop_tracing): Make extern. Handle tracing stops due to GDB
disconnecting.
(cmd_qtdisconnected): New.
(cmd_qtstatus): Report disconnected tracing status in trace reply.
(handle_tracepoint_general_set): Handle QTDisconnected.
* event-loop.c (event_handler_func): Change return type to int.
(process_event): Bail out if the event handler wants the event
loop to stop.
(handle_file_event): Ditto.
(start_event_loop): Bail out if the event handler wants the event
loop to stop.
* nto-low.c (nto_target_ops): Adjust.
* spu-low.c (spu_wait): Don't remove the process here.
(spu_target_ops): Adjust.
* win32-low.c (win32_wait): Don't remove the process here.
(win32_target_ops): Adjust.
* configure: Regenerated.
* configure.ac: Add case for srv_qnx and set LIBS accordingly.
* configure.srv (i[34567]86-*-nto*): New target.
* nto-low.c, nto-low.h, nto-x86-low.c: New files.
* remote-utils.c [__QNX__]: Include sys/iomgr.h
(nto_comctrl) [__QNX__]: New function.
(enable_async_io, disable_async_io) [__QNX__]: Call nto_comctrl.
Pedro Alves
Tom Tromey
Markus Metzger
Joel Brobecker
Simon Marchi
Sergio Durigan Junior
Josh Stone
Antoine Tremblay
Aleksandar Ristovski
Yao Qi
Gary Benson
Joel Brobecker
Yao Qi
Michael Snyder
gdbadmin