af542c2e31
Cleanups after the update to Autoconf 2.64, Automake 1.11.
...
/:
* README-maintainer-mode: Point directly to upstream locations
for autoconf, automake, libtool, gettext, instead of copies on
sources.redhat.com. Document required versions.
* configure.ac: Do not substitute datarootdir, htmldir,
pdfdir, docdir. Do not process --with-datarootdir,
--with-htmldir, --with-pdfdir, --with-docdir.
* configure: Regenerate.
gdb/:
* CONTRIBUTE: Bump documented Autoconf version.
* configure.ac: Do not substitute datarootdir, htmldir,
pdfdir, docdir. Do not process --with-datarootdir,
--with-htmldir, --with-pdfdir, --with-docdir.
* configure: Regenerate.
gdb/doc/:
* gdbint.texinfo (Releasing GDB): Point to
README-maintainer-mode file for required autoconf version.
* configure.ac: Do not substitute datarootdir, htmldir,
pdfdir, docdir. Do not process --with-datarootdir,
--with-htmldir, --with-pdfdir, --with-docdir.
* configure: Regenerate.
gprof/:
* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(install-pdf-recursive, html__strip_dir, install-html)
(install-html-am, install-html-recursive): Remove.
* Makefile.in: Regenerate.
opcodes/:
* Makefile.am (install-pdf, install-html): Remove.
* Makefile.in: Regenerate.
gas/:
* Makefile.am (install-pdf, install-pdf-recursive, install-html)
(install-html-recursive): Remove.
* Makefile.in: Regenerate.
* doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(html__strip_dir, install-html, install-html-am): Remove.
* doc/Makefile.in: Regenerate.
ld/:
* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(install-pdf-recursive, html__strip_dir, install-html)
(install-html-am, install-html-recursive): Remove.
* Makefile.in: Regenerate.
binutils/:
* Makefile.am (install-pdf, install-pdf-recursive, install-html)
(install-html-recursive): Remove.
* Makefile.in: Regenerate.
* doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(html__strip_dir, install-html, install-html-am): Remove.
* doc/Makefile.in: Regenerate.
bfd/:
* Makefile.am (datarootdir, docdir, htmldor, pdfdir)
(install-pdf, install-pdf-recursive, install-html)
(install-html-recursive): Remove.
* Makefile.in: Regenerate.
bfd/doc/:
* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(html__strip_dir, install-html, install-html-am): Remove.
* Makefile.in: Regenerate.
2009-08-22 17:08:11 +00:00
81ecdfbb4d
Regenerate tree using Autoconf 2.64 and Automake 1.11.
...
config/:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump to 2.64.
/:
* configure: Regenerate.
etc/:
* configure: Regenerate.
sim/common/:
* config.in: Regenerate.
* configure: Likewise.
sim/iq2000/:
* config.in: Regenerate.
* configure: Likewise.
sim/d10v/:
* config.in: Regenerate.
* configure: Likewise.
sim/igen/:
* config.in: Regenerate.
* configure: Likewise.
sim/m32r/:
* config.in: Regenerate.
* configure: Likewise.
sim/frv/:
* config.in: Regenerate.
* configure: Likewise.
sim/:
* avr/config.in: Regenerate.
* avr/configure: Likewise.
* configure: Likewise.
* cris/config.in: Likewise.
* cris/configure: Likewise.
sim/h8300/:
* config.in: Regenerate.
* configure: Likewise.
sim/mn10300/:
* config.in: Regenerate.
* configure: Likewise.
sim/ppc/:
* config.in: Regenerate.
* configure: Likewise.
sim/erc32/:
* config.in: Regenerate.
* configure: Likewise.
sim/arm/:
* config.in: Regenerate.
* configure: Likewise.
sim/m68hc11/:
* config.in: Regenerate.
* configure: Likewise.
sim/lm32/:
* config.in: Regenerate.
* configure: Likewise.
sim/sh64/:
* config.in: Regenerate.
* configure: Likewise.
sim/v850/:
* config.in: Regenerate.
* configure: Likewise.
sim/cr16/:
* config.in: Regenerate.
* configure: Likewise.
sim/moxie/:
* config.in: Regenerate.
* configure: Likewise.
sim/m32c/:
* config.in: Regenerate.
* configure: Likewise.
sim/mips/:
* config.in: Regenerate.
* configure: Likewise.
sim/mcore/:
* config.in: Regenerate.
* configure: Likewise.
sim/testsuite/d10v-elf/:
* configure: Regenerate.
sim/testsuite/:
* configure: Regenerate.
sim/testsuite/frv-elf/:
* configure: Regenerate.
sim/testsuite/m32r-elf/:
* configure: Regenerate.
sim/testsuite/mips64el-elf/:
* configure: Regenerate.
sim/sh/:
* config.in: Regenerate.
* configure: Likewise.
gold/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
* testsuite/Makefile.in: Likewise.
gprof/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* configure: Likewise.
* gconfig.in: Likewise.
opcodes/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
gas/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
* doc/Makefile.in: Likewise.
ld/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
gdb/:
* aclocal.m4: Regenerate.
* config.in: Likewise.
* configure: Likewise.
* gnulib/Makefile.in: Likewise.
gdb/doc/:
* configure: Regenerate.
gdb/gdbserver/:
* aclocal.m4: Regenerate.
* config.in: Likewise.
* configure: Likewise.
gdb/testsuite/:
* configure: Regenerate.
* gdb.hp/configure: Likewise.
* gdb.hp/gdb.aCC/configure: Likewise.
* gdb.hp/gdb.base-hp/configure: Likewise.
* gdb.hp/gdb.compat/configure: Likewise.
* gdb.hp/gdb.defects/configure: Likewise.
* gdb.hp/gdb.objdbg/configure: Likewise.
* gdb.stabs/configure: Likewise.
binutils/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
* doc/Makefile.in: Likewise.
bfd/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
bfd/doc/:
* Makefile.in: Regenerate.
readline/:
* configure: Regenerate.
readline/examples/rlfe/:
* configure: Regenerate.
2009-08-22 16:56:56 +00:00
4efc650796
Add interface for JIT code generation.
...
* NEWS: Announce JIT interface.
* Makefile.in (SFILES): Add jit.c.
(HFILES_NO_SRCDIR): Add jit.h.
(COMMON_OBS): Add jit.o.
* jit.c: New file.
* jit.h: New file.
* breakpoint.h (enum bptype): Add bp_jit_event to enum.
* breakpoint.c:
(update_breakpoints_after_exec): Delete jit breakpoints after exec.
(bpstat_what): Update event table for bp_jit_event.
(print_it_typical): Added case for bp_jit_event.
(print_one_breakpoint_location): Added case for bp_jit_event.
(allocate_bp_location): Added case for bp_jit_event.
(mention): Added case for bp_jit_event.
(delete_command): Added case for bp_jit_event.
(breakpoint_re_set_one): Added case for bp_jit_event.
(breakpoint_re_set): Added call to jit_inferior_created_hook.
(create_jit_event_breakpoint): New.
* infrun.c (handle_inferior_event): Add handler for jit event.
(follow_exec): Add call to jit_inferior_created_hook.
* doc/gdb.texinfo: Add chapter on JIT interface.
2009-08-20 18:02:48 +00:00
43089a6e06
*** empty log message ***
2009-08-06 23:06:54 +00:00
99e008fef7
* gdb.texinfo (Separate Debug Files, Remote Protocol): Clarified
...
CRC definitions.
2009-08-05 17:47:09 +00:00
48cb2d8581
Implement -break-commands
...
* breakpoint.c (get_breakpoint, breakpoint_set_commands): New.
(commands_command): Use breakpoint_set_commands.
* breakpoint.h (get_breakpoint, breakpoint_set_commands): Declare.
* mi/mi-cmds.h (mi_cmd_break_commands): New.
* mi/mi-cmds.c: Register -break-commands.
* mi/mi-cmd-break.c (mi_cmd_break_commands, mi_read_next_line)
(mi_command_line_array, mi_command_line_array_cnt)
(mi_command_line_array_ptr): New.
2009-08-03 12:39:01 +00:00
ff1a52c620
ChangeLog:
...
* spu-tdep.c: Include "infcall.h".
(spu_address_class_type_flags): New function.
(spu_address_class_type_flags_to_name): Likewise.
(spu_address_class_name_to_type_flags): Likewise.
(spu_pointer_to_address): Handle __ea pointers.
(spu_auto_flush_cache_p): New static variable.
(spu_objfile_from_frame): New function.
(flush_ea_cache, spu_attach_normal_stop): Likewise.
(show_spu_auto_flush_cache): Likewise.
(spu_gdbarch_init): Install address class handlers.
(_initialize_spu_tdep): Attach to normal_stop observer.
Install "set spu auto-flush-cache" / "show spu auto-flush-cache"
commands.
* NEWS: Mention "set/show spu auto-flush-cache" commands.
doc/ChangeLog:
* gdb.texinfo (Cell Broadband Engine SPU architecture): Document the
"set spu auto-flush-cache" and "show spu auto-flush-cache" commands.
2009-07-31 15:35:38 +00:00
3285f3fe1a
ChangeLog:
...
* spu-tdep.c: Include "block.h".
(setspucmdlist, showspucmdlist): New static variables.
(spu_stop_on_load_p): Likewise.
(spu_catch_start): New function.
(show_spu_command, set_spu_command): New functions.
(show_spu_stop_on_load): Likewise.
(_initialize_spu_tdep): Attach spu_catch_start to new_objfile observer.
Install "set spu" / "show spu" prefix command handler.
Install "set spu stop-on-load" / "show spu stop-on-load" command.
* NEWS: Mention "set/show spu stop-on-load" commands.
doc/ChangeLog:
* gdb.texinfo (Cell Broadband Engine SPU architecture): Document the
"set spu stop-on-load" and "show spu stop-on-load" commands.
2009-07-31 15:33:50 +00:00
e35359c551
ChangeLog:
...
* features/gdb-target.dtd (target): Accept optional
<compatible> elements.
(compatible): Define element.
* target-descriptions.h (tdesc_compatible_p): New.
(tdesc_add_compatible): New.
* target-descriptions.c (arch_p): New VEC_P type.
(struct target_desc): New member compatible.
(free_target_description): Handle it.
(maint_print_c_tdesc_cmd): Likewise.
(tdesc_compatible_p): New function.
(tdesc_add_compatible): New function.
* xml-tdesc.c (tdesc_end_compatible): New function.
(target_children): Handle <compatible> element.
* arch-utils.c (choose_architecture_for_target): Accept target
description instead of BFD architecture as input. Query target
description for compatible architectures.
(gdbarch_info_fill): Update call.
* NEWS: Mention <compatible> element of target descriptions.
doc/ChangeLog:
* gdb.texinfo (Target Descriptions): Document <compatible> element.
2009-07-31 14:39:12 +00:00
58d6951de5
* NEWS: Mention ARM VFP support.
...
* target-descriptions.c (tdesc_register_type): Make public.
(tdesc_unnumbered_register): New function.
(tdesc_register_reggroup_p): Allow missing
pseudo_register_reggroup_p.
* target-descriptions.h (tdesc_register_type): Declare.
(tdesc_unnumbered_register): Declare.
* arm-tdep.c (arm_neon_quad_read, arm_neon_quad_write): New functions.
(arm_push_dummy_call): Use arm_neon_quad_write.
(arm_neon_double_type, arm_neon_quad_type): New functions.
(arm_register_type): Handle VFP and NEON registers. Override the
types of double-precision registers for NEON. Disable FPA registers
if they are not present.
(arm_dwarf_reg_to_regnum): Add current VFP and NEON register numbers.
(arm_return_value): Use arm_neon_quad_write and arm_neon_quad_read.
(arm_register_name): Handle VFP single and NEON quad registers.
(arm_pseudo_read, arm_pseudo_write): New functions.
(arm_gdbarch_init): Check for VFP and NEON in the target description.
Assign numbers to double-precision registers. Register VFP and NEON
pseudo registers. Remove a shadowed "i" variable.
* arm-tdep.h (enum gdb_regnum): Add ARM_D0_REGNUM and
ARM_D31_REGNUM.
(struct gdbarch_tdep): Add have_neon_pseudos, have_neon,
have_vfp_registers, have_vfp_pseudos, neon_double_type,
and neon_quad_type.
* features/Makefile: Make expedite settings only architecture
specific.
(WHICH): Add new ARM descriptions.
* features/arm-with-neon.xml, features/arm-with-vfpv2.c,
features/arm-with-vfpv3.c, features/arm-vfpv2.xml,
features/arm-vfpv3.xml, features/arm-with-vfpv2.xml,
features/arm-with-vfpv3.xml, features/arm-with-neon.c: New files.
* regformats/arm-with-neon.dat, regformats/arm-with-vfpv2.dat,
regformats/arm-with-vfpv3.dat: Generate.
doc/
* gdb.texinfo (ARM Features): Document org.gnu.gdb.arm.vfp and
org.gnu.gdb.arm.neon.
gdbserver/
* linux-low.c (linux_write_memory): Update debugging output.
* Makefile.in (clean): Add new descriptions.
(arm-with-vfpv2.o, arm-with-vfpv2.c, arm-with-vfpv3.o)
(arm-with-vfpv3.c, arm-with-neon.o, arm-with-neon.c): New rules.
* configure.srv: Add new files for arm*-*-linux*.
* linux-arm-low.c: Add new declarations.
(PTRACE_GETVFPREGS, PTRACE_SETVFPREGS): Define if undefined.
(arm_hwcap, HWCAP_VFP, HWCAP_IWMMXT, HWCAP_NEON, HWCAP_VFPv3)
(HWCAP_VFPv3D16): New.
(arm_fill_wmmxregset, arm_store_wmmxregset): Check HWCAP_IWMMXT
instead of __IWMMXT__.
(arm_fill_vfpregset, arm_store_vfpregset, arm_get_hwcap)
(arm_arch_setup): New.
(target_regsets): Remove #ifdef. Add VFP regset.
(the_low_target): Use arm_arch_setup.
testsuite/
* gdb.base/float.exp: Handle VFP registers.
2009-07-28 18:26:51 +00:00
08d1664121
2009-07-20 Pedro Alves <pedro@codesourcery.com>
...
* features/gdb-target.dtd (target): Accept an optional 'osabi'
element.
(osabi): Define element.
* features/mips-linux.xml (target): Add an osabi subelement set to
GNU/Linux.
* regformats/regdat.sh (xmlarch, xmlosabi): New variables. Don't
write the architecture into $xmltarget. Store it in $xmlarch.
Handle the 'osabi' type. Handle outputting the osabi element of
the target description.
* regformats/reg-x86-64-linux.dat (osabi): Set to GNU/Linux.
* regformats/reg-i386-linux.dat (osabi): Set to GNU/Linux.
* target-descriptions.h (tdesc_osabi, set_tdesc_osabi): Declare.
* target-descriptions.c (struct target_desc) <osabi>: New field.
(tdesc_osabi): New function.
(set_tdesc_osabi): New function.
* xml-tdesc.c: Include osabi.h.
(tdesc_end_osabi): New.
(target_children): Parse "osabi" elements.
* arch-utils.c (gdbarch_info_fill): Try to get the osabi from the
target description if the user didn't override it or it is not
extractable from the bfd. If that still fails, fallback to the
configured in default.
* osabi.h (osabi_from_tdesc_string): Declare.
* osabi.c (osabi_from_tdesc_string): New.
(gdbarch_lookup_osabi): Return GDB_OSABI_UNKNOWN instead of
GDB_OSABI_DEFAULT.
* NEWS: Mention that target descriptions can now describe the
target OS ABI.
2009-07-20 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (Target Description Format): Mention the new <osabi>
optional element.
(subsection OS ABI): New subsection.
2009-07-20 18:51:42 +00:00
782b2b0784
gdb/
...
Conditional tracepoints.
* ax-gdb.h (gen_eval_for_expr): Declare.
* ax-gdb.c (gen_expr): Generate bytecodes for BINOP_EQUAL
and other comparisons.
(gen_eval_for_expr): New function.
(agent_eval_command): New maintenance command.
(_initialize_ax_gdb): Define the command.
* remote.c (struct remote_state): New field cond_tracepoints.
(PACKET_ConditionalTracepoints): New packet config type.
(remote_cond_tracepoint_feature): New function.
(remote_protocol_features): Add ConditionalTracepoints.
(remote_supports_cond_tracepoints): New function.
(_initialize_remote): Add ConditionalTracepoints.
* tracepoint.c (download_tracepoint): Add conditional.
* NEWS: Mention conditional tracepoints.
gdb/doc/
* gdb.texinfo (Tracepoint Conditions): New section.
(General Query Packets): Describe ConditionalTracepoints.
(Tracepoint Packets): Describe condition field.
(Maintenance Commands): Describe maint agent-eval.
* agentexpr.texi (Using Agent Expressions): Mention eval usage.
gdb/testsuite/
* gdb.trace/tracecmd.exp: Add basic test of tracepoint conditions.
2009-07-14 21:40:34 +00:00
9b117ef31f
2009-07-11 Hui Zhu <teawater@gmail.com>
...
* gdb.texinfo (disassemble): Add a new modifier /r
to "disassemble" command to make it print the raw instructions
in hex as well as in symbolic form.
2009-07-11 14:09:16 +00:00
f5a3328452
* gdbint.texinfo (Testsuite): Document parallel make check.
2009-07-10 19:38:00 +00:00
812f734247
gdb/doc
...
* gdbint.texinfo (Testsuite): Document test transcripts.
gdb/testsuite
* lib/gdb.exp: Handle TRANSCRIPT.
(remote_spawn, remote_close, send_gdb): New procs.
2009-07-10 18:48:41 +00:00
fbb8f2990c
2009-07-10 Phil Muldoon <pmuldoon@redhat.com>
...
* python/python-internal.h (apply_varobj_pretty_printer): Update
definition.
(python_string_to_target_python_string): Add definition.
* python/python-utils.c (unicode_to_encoded_python_string)
(unicode_to_target_python_string)
(python_string_to_target_python_string): New Functions.
* python/python-prettyprint.c (pretty_print_one_value): Likewise.
(print_string_repr): Refactor to logic to account for PyObject
returned strings.
(apply_varobj_pretty_printer): Likewise.
* python/python-value.c (valpy_string): Parse length keyword. Use
length keyword in LA_GET_STRING.
* varobj.c (value_get_print_value): Refactor logic to account for
PyObject returned strings.
* c-lang.c (c_get_string): If the length parameter is specified,
use that. Return value in characters. Update comments.
* language.h: Update c_get_string prototype comments.
2009-07-10 Phil Muldoon <pmuldoon@redhat.com>
* gdb.texinfo (Values From Inferior): Add length parameter
description.
2009-07-10 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/python-prettyprint.c: Add counted null string
structure.
* gdb.python/python-prettyprint.exp: Print null string. Test for
embedded nulls.
* gdb.python/python-prettyprint.py (pp_ns): New Function.
* gdb.python/python-value.exp (test_value_in_inferior): Add
variable length string fetch tests.
* gdb.python/python-value.c (main): Add strings for string fetch tests.
2009-07-10 10:35:17 +00:00
dd8f35ac84
*** empty log message ***
2009-07-04 12:12:20 +00:00
2277426b30
gdb/
...
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* linux-nat.c (linux_child_follow_fork): If we're staying attached
to the child process, enable event reporting on it. Don't handle
checkpoints here. Instead, add the child fork to the lwp thread
and inferior lists without clobbering the previous inferior. Let
the thread_db layer learn about a new child process, even if
following the parent.
(linux_nat_switch_fork): Delete lwps of the current inferior only,
instead of clearing the whole list. Use thread_change_ptid to
give the core the illusion the new checkpoint is still the same
inferior. Clear the register cache.
(linux_handle_extended_wait): Handle checkpoints here.
(linux_multi_process): Turn on.
* linux-fork.c (struct fork_info) <pc>: Remove field.
(init_fork_list): Do not delete the checkpoint from the inferior
list (it is not there).
(fork_load_infrun_state): Don't switch inferior_ptid here. Pass
the new checkpoint's ptid to linux_nat_switch_fork.
(fork_save_infrun_state): Make static. Don't stop the pc field of
fork_info, it's gone.
(linux_fork_mourn_inferior): Don't delete the checkpoint from the
inferior list, it's not there.
(linux_fork_detach): Ditto.
(delete_fork_command): Replace mention of fork/checkpoint by
checkpoint only.
(detach_fork_command): Likewise. Don't delete the checkpoint from
the inferior list.
(info_forks_command): Adjust.
(restore_detach_fork): Delete.
(checkpointing_pid): New.
(linux_fork_checkpointing_p): New.
(save_detach_fork): Delete.
(checkpoint_command): Delete temp_detach_fork. Don't remove
breakpoints, that's a nop. Store the pid of the process we're
checkpointing, and use make_cleanup_restore_integer to restore it.
Don't reinsert breakpoints here.
(process_command, fork_command): Delete.
(restart_command): Update comments to only mention checkpoints,
not forks.
(_initialize_linux_fork): Delete "fork", "process", "info forks"
commands.
* linux-fork.h (fork_save_infrun_state, fork_list): Delete
declarations.
(linux_fork_checkpointing_p): Declare.
* cli/cli-cmds.c (killlist): New.
* cli/cli-cmds.h (killlist): Declare.
* gdbcmd.h (killlist): Declare.
* inferior.c: Include "gdbthread.h".
(detach_inferior_command, kill_inferior_command)
(inferior_command): New.
(info_inferiors_command): Allow specifying a specific inferior id.
(_initialize_inferiors): Register "inferior", "kill inferior" and
"detach inferior" commands.
* infcmd.c (_initialize_infcmd): Make "kill" a prefix command.
* gdbthread.h (any_thread_of_process): Declare.
* thread.c (any_thread_of_process): New.
* NEWS: Mention multi-inferior debugging. Mention 'info
inferiors', 'inferior', 'detach inferior' and 'kill inferior' as
new commands.
(Removed commands): New section, mentioning that 'info forks',
'fork', 'process', 'delete fork' and 'detach fork' are now gone.
gdb/testsuite/
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* gdb.base/multi-forks.exp: Only run detach-on-fork tests on
linux. Adjust to use "inferior", "info inferiors", "detach
inferior" and "kill inferior" instead of "restart", "info fork",
"detach fork" and "delete fork".
* gdb.base/ending-run.exp: Spell out "info".
* gdb.base/help.exp: Adjust to use test_prefix_command_help for
the "kill" command.
gdb/doc/
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (Debugging multiple inferiors): Document the
"inferior", "detach inferior" and "kill inferior" commands.
(Debugging Programs with Multiple Processes): Adjust to mention
generic "inferior" commands. Delete mention of "detach fork" and
"delete fork". Cross reference to "Debugging multiple inferiors"
section.
2009-07-02 21:57:28 +00:00
5af949e350
* defs.h (strlen_paddr, paddr, paddr_nz): Remove.
...
(paddress): Add GDBARCH parameter.
* utils.c (strlen_paddr, paddr, paddr_nz): Remove.
(paddress): Add GDBARCH parameter, use it instead of current_gdbarch.
* ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter.
* ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter,
use it instead of current_gdbarch.
Update calls to ui_out_field_core_addr to pass architecture:
* ada-lang.c (print_one_exception): Update.
* breakpoint.c (print_one_breakpoint_location,
print_one_exception_catchpoint): Update.
* disasm.c (dump_insns): Update.
* darwin-nat-info.c (darwin_debug_regions_recurse): Update.
* mi/mi-main.c (mi_cmd_data_read_memory): Update.
* mi/mi-symbol-cmds.c: Include "objfiles.h".
(mi_cmd_symbol_list_lines): Update.
* stack.c (print_frame_info, print_frame): Update.
Update callers of paddress to pass architecture:
* ada-tasks.c (info_task): Update.
* ada-valprint.c (ada_val_print_1): Update.
* annotate.c (annotate_source, annotate_frame_begin): Update.
* breakpoint.c (insert_bp_location, describe_other_breakpoints,
mention): Update.
* cli/cli-cmds.c (edit_command, list_command, print_disassembly):
Update.
* corefile.c (memory_error): Update.
* c-valprint.c (print_function_pointer_address, c_val_print): Update.
* disasm.c (dis_asm_print_address): Update.
* exec.c (print_section_info): Update.
* f-valprint.c (f_val_print): Update.
* infcmd.c: Include "arch-utils.h".
(jump_command, program_info): Update.
* linux-fork.c: Include "arch-utils.h".
(info_forks_command): Update.
* m2-valprint.c (print_function_pointer_address,
print_unpacked_pointer, print_variable_at_address,
m2_val_print): Update.
* m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command):
Update.
* printcmd.c (print_address, print_address_demangle, address_info):
Update.
* p-valprint.c (pascal_val_print): Update.
* source.c: Include "arch-utils.h".
(line_info): Update.
* stack.c (frame_info, print_block_frame_labels): Update.
* symfile.c (add_symbol_file_command, list_overlays_command): Update.
* symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1,
print_symbol, print_partial_symbols, maintenance_info_psymtabs,
maintenance_check_symtabs): Update.
* symtab.c (find_pc_sect_symtab): Update.
* target.c (deprecated_debug_xfer_memory): Update.
* tracepoint.c (scope_info): Update.
* tui/tui-stack.c (tui_make_status_line): Update.
* valprint.c (val_print_string): Update.
Update callers of paddr_nz to use paddress instead (keeping
user-visible output identical):
* alpha-tdep.c (alpha_heuristic_proc_start): Update.
* amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn,
amd64_displaced_step_fixup): Update.
* arch-utils.c (simple_displaced_step_copy_insn): Update.
* auxv.c (fprint_target_auxv): Update.
* breakpoint.c (insert_single_step_breakpoint): Update.
* buildsym.c (finish_block): Update.
* cli/cli-dump.c (restore_section_callback): Update.
* fbsd-nat.c (fbsd_find_memory_regions): Update.
* frame.c (frame_unwind_register_value): Update.
* gcore.c (gcore_create_callback): Update.
* hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update.
* i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm,
i386_record_lea_modrm_addr, i386_record_lea_modrm,
i386_process_record): Update.
* ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id,
ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id,
ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update.
* infrun.c (displaced_step_prepare, displaced_step_fixup,
handle_inferior_event, insert_step_resume_breakpoint_at_sal,
insert_longjmp_resume_breakpoint): Update.
* linux-nat.c (linux_nat_find_memory_regions): Update.
* linux-record.c (record_linux_system_call): Update.
* mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call,
mips_n32n64_push_dummy_call, mips_o32_push_dummy_call,
mips_o64_push_dummy_call): Update.
* monitor.c (monitor_error, monitor_remove_breakpoint): Update.
* record.c (record_arch_list_add_mem, record_wait,
record_xfer_partial): Update.
* remote-mips.c (mips_fetch_word, mips_check_lsi_error,
mips_common_breakpoint): Update.
* remote-sim.c (gdbsim_xfer_inferior_memory): Update.
* rs6000-tdep.c (ppc_displaced_step_fixup): Update.
* solib-som.c (som_current_sos): Update.
* symfile.c (load_progress, generic_load): Update.
* symfile-mem.c (add_vsyscall_page): Update.
* valops.c (value_fetch_lazy): Update.
* windows-tdep.c (windows_xfer_shared_library): Update.
Update callers of paddr_nz to use paddress instead (changing
user-visible output to make it more correct):
* dwarf2loc.c (locexpr_describe_location): Update.
* ia64-tdep.c (ia64_memory_insert_breakpoint,
ia64_memory_remove_breakpoint): Update.
* jv-valprint.c (java_value_print): Update.
* m32c-tdep.c (m32c_m16c_address_to_pointer): Update.
* monitor.c (monitor_read_memory): Update.
Update callers of paddr to use paddress instead (changing
user-visible output to make it more correct):
* arm-tdep.c (arm_push_dummy_call): Update.
* breakpoint.c (insert_bp_location, create_thread_event_breakpoint,
create_breakpoint): Update.
* darwin-nat-info.c (darwin_debug_regions): Update.
* dcache.c (dcache_info): Update.
* dsrec.c (load_srec, make_srec): Update.
* dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program,
dwarf2_frame_cache): Update.
* gcore.c (gcore_copy_callback): Update.
* gnu-nat.c (gnu_xfer_memory): Update.
* mips-linux-nat.c (mips_show_dr): Update.
* monitor.c (monitor_write_memory, monitor_insert_breakpoint,
monitor_remove_breakpoint): Update.
* remote.c (compare_sections_command): Update.
* remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint,
m32r_remove_breakpoint, m32r_insert_watchpoint,
m32r_remove_watchpoint): Update.
* sol-thread.c (info_cb): Update.
* symfile.c (load_progress): Update.
Update callers of paddress or paddr_nz to use hex_string instead
(changes output of internal/error/debug messages only):
* dwarf2read.c (dump_die_shallow): Update.
* frame.c (fprint_field, fprint_frame, frame_pc_unwind,
get_frame_func, create_new_frame): Update.
* hppa-tdep.c (find_unwind_entry, unwind_command): Update.
* ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x,
ia64_get_dyn_info_list): Update.
* maint.c (maintenance_translate_address): Update.
* mi/mi-cmd-var.c (mi_cmd_var_create): Update.
* target.c (target_flash_erase): Update.
Update callers of paddr/paddr_nz to use phex/phex_nz instead,
using an appropriate address size. Remove use of strlen_paddr.
* exec.c (exec_files_info): Update.
* i386-nat.c (i386_show_dr): Update.
* remote.c (remote_flash_erase): Update.
* m32r-rom.c (m32r_load_section): Update.
* monitor.c (monitor_vsprintf, monitor_store_register): Update.
* remote.c (remote_check_symbols, remote_search_memory): Update.
* remote-mips.c (mips_request, mips_common_breakpoint): Update.
* scm-valprint.c (scm_ipruk, scm_scmval_print): Update.
* sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update.
* sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs,
sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs,
sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs,
sh_dsp_show_regs): Update.
* xcoffsolib.c (sharedlibrary_command): Update.
* maint.c (maint_print_section_info): Add ADDR_SIZE parameter.
Use hex_string_custom instead of paddr.
(print_bfd_section_info): Pass address size.
(print_objfile_section_info): Likewise.
* annotate.h (annotate_source): Add GDBARCH parameter.
(annotate_frame_begin): Likewise.
* annotate.c (annotate_source): Add GDBARCH parameter.
(annotate_frame_begin): Likewise.
* source.c (identify_source_line): Update call to annotate_source.
* stack.c (print_frame_info, print_frame): Update call to
annotate_frame_begin.
* breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter.
(create_breakpoint, create_ada_exception_breakpoint): Update call.
* stack.c (print_block_frame_labels): Add GDBARCH parameter.
(print_frame_label_vars): Update call.
* symmisc.c (print_partial_symbols): Add GDBARCH parameter.
(dump_psymtab): Update call to print_partial_symbols.
(struct print_symbol_args): Add GDBARCH member.
(dump_symtab_1): Set print_symbol_args architecture member.
(print_symbol): Use it.
* windows-tdep.h (windows_xfer_shared_library): Add GDBARCH
parameter.
* windows-tdep.c (windows_xfer_shared_library): Likewise.
* i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member.
(core_process_module_section): Pass architecture from cpms_data to
windows_xfer_shared_library.
(windows_core_xfer_shared_libraries): Initialize cmps_data
architecture member.
* windows-nat.c (windows_xfer_shared_libraries): Pass architecture
to windows_xfer_shared_library.
* defs.h (print_address): Add GDBARCH parameter.
* printcmd.c (print_address): Add GDBARCH parameter.
(print_scalar_formatted, do_examine): Update call.
* findcmd.c (find_command): Update call.
* tracepoint.c: Include "arch-utils.h".
(trace_find_line_command): Update call.
* tui/tui-disasm.c (tui_disassemble): Update call.
* value.h (print_address_demangle): Add GDBARCH parameter.
* printcmd.c (print_address_demangle): Add GDBARCH parameter.
* c-valprint.c (print_function_pointer_address, c_val_print):
Update call.
* f-valprint.c (f_val_print): Update call.
* gnu-v3-abi.c (gnuv3_print_method_ptr): Update call.
* jv-valprint.c (java_val_print): Update call.
* m2-valprint.c (print_function_pointer_address, m2_val_print):
Update call.
* p-valprint.c (pascal_val_print): Update call.
* disasm.c (gdb_disassemble_info): Install architecture into
di.application_data field.
testsuite/ChangeLog:
* gdb.threads/tls-shared.exp: Update to locexpr_describe_location
change to prefix TLS offset in hex with 0x.
doc/ChangeLog:
* gdbint.texinfo (Item Output Functions): Update signature
for ui_out_field_core_addr.
2009-07-02 17:21:10 +00:00
a6d9a66e23
* breakpoint.h (struct breakpoint): New member GDBARCH.
...
* breakpoint.c: Include "arch-utils.h".
(set_raw_breakpoint_without_location): Add GDBARCH parameter.
Use it to set breakpoint architecture.
(set_raw_breakpoint): Add GDBARCH parameter.
(create_internal_breakpoint): Likewise.
(create_catchpoint): Likewise.
(create_fork_vfork_event_catchpoint): Likewise.
(create_breakpoint): Likewise.
(create_breakpoints): Likewise.
(break_command_really): Likewise.
(create_ada_exception_breakpoint): Likewise.
Update local callers to pass architecture:
(create_internal_breakpoint): Update.
(create_overlay_event_breakpoint): Update.
(create_longjmp_master_breakpoint): Update.
(create_thread_event_breakpoint): Update.
(create_solib_event_breakpoint): Update.
(create_catchpoint): Update.
(create_fork_vfork_event_catchpoint): Update.
(set_momentary_breakpoint): Update.
(clone_momentary_breakpoint): Update.
(create_breakpoint): Update.
(create_breakpoints): Update.
(break_command_really): Update.
(break_command_1): Update.
(set_breakpoint): Update.
(watch_command_1): Update.
(catch_fork_command_1): Update.
(catch_exec_commnd_1): Update.
(handle_gnu_v3_exceptions): Update.
(create_ada_exception_breakpoint): Update.
(catch_ada_exception_command): Update.
(catch_assert_command): Update.
(trace_command): Update.
* breakpoint.h (struct bp_location): New member GDBARCH.
* breakpoint.c (get_sal_arch): New function.
(set_raw_breakpoint): Set location architecture.
(add_location_to_breakpoint): Likewise.
(clone_momentary_breakpoint): Likewise.
(watch_command_1): Likewise.
(update_watchpoint): Likewise.
(bp_loc_is_permanent): Use location architecture instead of
current_gdbarch.
(adjust_breakpoint_address): Add GDBARCH parameter; use it
instead of current_gdbarch.
Update callers of adjust_breakpoint_address to pass
breakpoint location architecture:
(set_raw_breakpoint): Update.
(watch_command_1): Update.
* tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead
of current_gdbarch.
(add_local_symbols): Add GDBARCH parameter. Pass to collect_symbol.
(encode_actions): Pass tracepoint architecture to add_local_symbols
(encode_actions): Use tracepoint architecture instead of
current_gdbarch. Pass it to add_local_symbols and collect_symbol.
* breakpoint.h (struct breakpoint_ops): Replace last_addr parameter
of print_one callback with last_loc.
* breakpoint.c (print_one_breakpoint_location): Replace last_addr
parameter with last_loc.
(print_one_breakpoint): Likewise.
(do_captured_breakpoint_query): Update call.
(breakpoint_1): Pass last_loc instead of last_addr to
print_one_breakpoint. Pass last location architecture instead of
current_gdbarch to set_next_address.
Update all implementations of the print_one callback:
* breakpoint.c (print_one_catch_fork): Update.
(print_one_catch_vfork): Update.
(print_one_catch_exec): Update.
(print_one_exception_catchpoint): Update.
* ada-lang.c (print_one_exception): Update.
(print_one_catch_exception): Update.
(print_one_catch_exception_unhandled): Update.
(print_one_catch_assert): Update.
* breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS
parameter. Use it instead of gdbarch_addr_bit (current_gdbarch).
(print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it
to print_one_breakpoint_location.
(breakpoint_address_bits): New function.
(do_captured_breakpoint_query): Compute number of address bits to print
and pass it to print_one_breakpoint.
(breakpoint_1): Likewise. Use it instead of current_gdbarch.
* breakpoint.h (create_thread_event_breakpoint): Add GDBARCH.
* breakpoint.c (create_thread_event_breakpoint): Likewise.
Update callers to create_thread_event_breakpoint:
* aix-thread.c (pd_enable): Update.
* linux-thread-db.c (enable_thread_event): Update.
* breakpoint.h (create_solib_event_breakpoint): Add GDBARCH.
* breakpoint.c (create_solib_event_breakpoint): Likewise.
Update callers to create_solib_event_breakpoint:
* solib-frv.c (enable_break, enable_break2): Update.
* solib-pa64.c (pa64_solib_create_inferior_hook): Update.
* solib-som.c (som_solib_create_inferior_hook): Update.
* solib-darwin.c (darwin_solib_create_inferior_hook): Update.
* solib-svr4.c (enable_break): Update.
* breakpoint.h (insert_single_step_breakpoint): Add GDBARCH.
* breakpoint.c (insert_single_step_breakpoint): Likewise.
Update callers to insert_single_step_breakpoint:
* alpha-tdep.c (alpha_software_single_step): Update.
* arm-linux-tdep.c (arm_linux_software_single_step): Update.
* arm-tdep.c (arm_software_single_step): Update.
* cris-tdep.c (cris_software_single_step): Update.
* rs6000-aix-tdep.c (rs6000_software_single_step): Update.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update.
* sparc-tdep.c (sparc_software_single_step): Update.
* spu-tdep.c (spu_software_single_step): Update.
* mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter.
Pass it to insert_single_step_breakpoint.
(mips_software_single_step): Pass architecture to
deal_with_atomic_sequence and insert_single_step_breakpoint.
* breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH.
(deprecated_remove_raw_breakpoint): Likewise.
* breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH.
(deprecated_remove_raw_breakpoint): Likewise.
Update callers to deprecated_insert_raw_breakpoint and
deprecated_remove_raw_breakpoint:
* breakpoint.c (single_step_gdbarch): New static variable.
(insert_single_step_breakpoint): Pass GDBARCH parameter to
deprecated_insert_raw_breakpoint. Store it in single_step_gdbarch.
(remove_single_step_breakpoints): Pass architecture stored in
single_step_gdbarch to deprecated_remove_raw_breakpoint.
* rs6000-nat.c (exec_one_dummy_insn): Update.
* solib-irix.c (enable_break, disable_break): Update.
* procfs.c (procfs_mourn_inferior): Update.
(remove_dbx_link_breakpoint): Update.
* breakpoint.h (set_breakpoint): Add GDBARCH parameter.
(set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
* breakpoint.c (set_breakpoint): Add GDBARCH parameter.
(set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
Update callers to set_breakpoint, set_momentary_breakpoint and
set_momentary_breakpoint_at_pc:
* breakpoint.c (set_momentary_breakpoint_at_pc): Update.
(until_break_command): Update.
* infcall.c (call_function_by_hand): Update.
* infcmd.c (finish_backward, finish_forward): Update.
* infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH
parameter. Pass it to set_momentary_breakpoint.
(insert_longjmp_resume_breakpoint): Add GDBARCH parameter.
Pass it to set_momentary_breakpoint_at_pc.
(handle_inferior_event): Update.
(insert_step_resume_breakpoint_at_frame): Update.
(insert_step_resume_breakpoint_at_caller): Update..
* mi/mi-cmd-break.c: Include "arch-utils.h".
(mi_cmd_break_insert): Update.
* target.h (struct target_ops): Add GDBARCH parameter to
to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint,
and to_remove_hw_breakpoint members.
(target_insert_breakpoint, target_remove_breakpoint,
target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH
parameter, pass to target routine.
(memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH
parameter.
* target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint,
debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add
GDBARCH parameter, pass to target routine.
(update_current_target): Update function signature.
* breakpoint.c (insert_bp_location, remove_breakpoint,
deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint):
Pass architecture to target_ routines.
Update all implementations of the target breakpoint routines to take
GDBARCH parameter and use it instead of GDBARCH as appropriate:
* corelow.c (ignore): Update.
* exec.c (ignore): Update.
* mem-break.c (memory_insert_breakpoint): Update.
(memory_remove_breakpoint): Update.
* monitor.c (monitor_insert_breakpoint): Update.
(monitor_remove_breakpoint): Update.
* record.c (record_insert_breakpoint): Update.
(record_beneath_to_insert_breakpoint): Update.
(record_remove_breakpoint): Update.
(record_beneath_to_remove_breakpoint): Update.
* remote.c (remote_insert_breakpoint): Update.
(remote_remove_breakpoint): Update.
(remote_insert_hw_breakpoint): Update.
(remote_remove_hw_breakpoint): Update.
* remote-m32r-sdi.c (m32r_insert_breakpoint): Update.
(m32r_remove_breakpoint): Update.
* remote-mips.c (mips_insert_breakpoint): Update.
(mips_remove_breakpoint): Update.
* i386-nat.c (i386_insert_hw_breakpoint): Update.
(i386_remove_hw_breakpoint): Update.
* nto-procfs.c (procfs_insert_breakpoint): Update.
(procfs_remove_breakpoint): Update.
(procfs_insert_hw_breakpoint): Update.
(procfs_remove_hw_breakpoint): Update.
doc/ChangeLog:
* gdbint.texi (Examples of Use of @code{ui_out} functions):
Update example code extrated from breakpoint.c.
2009-07-02 17:12:28 +00:00
9901a55bcf
ChangeLog:
...
2009-06-28 Paul Pluzhnikov <ppluzhnikov@google.com>
* mi/mi-cmds.c (mi_cmds): Remove unimplemented entries.
doc/ChangeLog:
2009-06-28 Paul Pluzhnikov <ppluzhnikov@google.com>
* gdb.texinfo (GDB/MI Program Context): @ignore unimplemented
MI commands.
(GDB/MI Symbol Query): Likewise.
(GDB/MI File Commands): Likewise.
(GDB/MI File Transfer Commands): Likewise.
(GDB/MI Target Manipulation): Likewise.
(GDB/MI Miscellaneous Commands): Likewise.
2009-06-28 18:53:12 +00:00
edb3359dff
gdb/
...
* NEWS: Document inlined function support.
* Makefile.in (SFILES): Add inline-frame.c.
(COMMON_OBS): Add inline-frame.o.
* block.c (contained_in): Rewrite to use lexical nesting.
(block_linkage_function): Skip inlined function blocks.
(block_inlined_p): New.
* block.h (struct block): Update comment.
(block_inlined_p): New prototype.
* blockframe.c (get_frame_block): Handle inlined functions.
(get_frame_function): Do not use block_linkage_function.
(block_innermost_frame): Use get_frame_block and contained_in.
* breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
Skip over inlined functions. Simplify epilogue check.
(bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
Update comments.
(set_momentary_breakpoint): Only accept non-inlined frames.
(watch_command_1): Use frame_unwind_caller_pc and
frame_unwind_caller_id instead of get_prev_frame.
(until_break_command): Likewise. Use get_stack_frame_id.
* buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
* dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
* dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
(read_func_scope, new_symbol): Likewise. Handle arguments specially
for inlined functions without call site information.
(inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
(die_specification): Treat DW_AT_abstract_origin as a specification.
(read_type_die): Handle DW_TAG_inlined_subroutine.
* frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
* frame.c (fprint_frame_id): Print inline depth.
(fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
(skip_inlined_frames, get_stack_frame_id): New.
(frame_unwind_caller_id): Use skip_inlined_frames.
(frame_id_inlined_p): New.
(frame_id_eq): Make the logic match the comments. Add inline_depth
check.
(frame_id_inner): Handle inlined functions.
(frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
(frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
(get_prev_frame_1): Check for inline frames. Split out frame
allocation to get_prev_frame_raw.
(get_prev_frame_raw): New function.
(get_prev_frame): Handle inline frames.
(get_frame_pc): Use frame_unwind_pc.
(get_frame_address_in_block): Skip inlined frames on both sides.
(pc_notcurrent): Delete.
(find_frame_sal): Rewrite to handle inline call sites. Use
get_frame_address_in_block.
(deprecated_update_frame_pc_hack): Make static.
* frame.h: Update comments.
(struct frame_id): Add inline_depth.
(enum frame_type): Add INLINE_FRAME.
(frame_id_inlined_p, get_stack_frame_id): New prototypes.
* gdbthread.h (struct thread_info): Add step_stack_frame_id field.
* infcmd.c (set_step_frame): New function.
(step_once): Use set_step_frame. Handle inlined functions.
(until_next_command): Use set_step_frame.
(finish_backward), finish_forward): Use get_stack_frame_id.
(finish_command): Support inlined functions.
* inferior.h (set_step_info): New prototype.
* infrun.c (RESUME_ALL): Use minus_one_ptid.
(clear_proceed_status): Clear step_stack_frame_id.
(init_wait_for_inferior): Call clear_inline_frame_state.
(init_execution_control_state): Make static.
(set_step_info): New function.
(init_thread_stepping_state): Do not set the symtab or line here.
(stepped_in_from): New function.
(handle_inferior_event): Handle inlined functions. Use set_step_info.
(insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
(struct inferior_status): Add step_stack_frame_id.
(save_inferior_status, restore_inferior_status): Save and restore
step_stack_frame_id.
* inline-frame.c, inline-frame.h: New files.
* minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
* regcache.c (regcache_write_pc): Call reinit_frame_cache.
* s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
* stack.c (frame_show_address): New.
(print_frame_info, print_frame): Use it.
(find_frame_funname): Use get_frame_function. Handle inlined blocks.
(frame_info): Mark inlined functions.
(backtrace_command_1): Use get_current_user_frame.
(print_frame_local_vars, print_frame_label_vars): Update comments.
(return_command): Refuse inlined functions.
* symtab.c (lookup_symbol_aux_local): Stop at inlined function
boundaries.
(find_function_start_sal): Avoid inlined functions.
(completion_list_add_fields): New function.
(default_make_symbol_completion_list): Use it. Use block_static_block
and block_global_block. Check for inlined functions.
(skip_prologue_using_sal): Avoid line number comparison across
inlining.
* symtab.h (struct symbol): Add is_inlined.
(SYMBOL_INLINED): New.
* target.c (target_resume): Call clear_inline_frame_state.
* valops.c (value_of_variable): Check block_inlined_p.
gdb/doc/
* gdb.texinfo (Debugging Optimized Code): New chapter.
(Compiling for Debugging): Reference it. Move some
text to the new section.
gdb/testsuite/
* gdb.base/break.exp: Add an XFAIL for gcc/36748.
* gdb.cp/annota2.exp: Accept frames-invalid in more places.
* gdb.opt/Makefile.in (EXECUTABLES): Update.
* gdb.opt/clobbered-registers-O2.exp: Update to GPL v3.
* gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp,
gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp,
gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp,
gdb.opt/inline-markers.c: New files.
* lib/gdb.exp (skip_inline_frame_tests): New function.
(skip_inline_var_tests): New function.
2009-06-28 00:20:24 +00:00
7cd1089b09
2009-06-15 Phil Muldoon <pmuldoon@redhat.com>
...
* infcall.c (show_unwind_on_terminating_exception_p): New
function.
(call_function_by_hand): Create breakpoint and clean-up call for
std::terminate.breakpoint. Add unwind_on_terminating_exception_p
gate. Pop frame on breakpoint hit.
(_initialize_infcall): Add add_setshow_boolean_cmd for
unwind-on-terminating-exception.
testsuite/
2009-06-15 Phil Muldoon <pmuldoon@redhat.com>
* gdb.cp/gdb2495.cc: New file.
* gdb.cp/gdb2495.exp: New file.
doc/
2009-06-15 Phil Muldoon <pmuldoon@redhat.com>
* doc/gdb.texinfo (Calling): Document
set-unwind-on-terminating-exception usage.
2009-06-15 12:11:37 +00:00
d4db2f362f
gdb/
...
* infrun.c (sched_multi): New global.
(resume): If sched_multi is set, resume only threads of the
current inferior.
(prepare_to_proceed): Don't switch over to wait_ptid if we're
resuming a different inferior, and sched_multi is off.
(show_schedule_multiple): New.
(_initialize_infrun): Register new "set schedule-multiple" command.
* inferior.h (sched_multi): Declare.
* NEWS: Mention new "schedule-multiple" setting.
gdb/doc/
* gdb.texinfo (All-Stop): Document new 'set schedule-multiple'
command.
2009-06-11 11:57:46 +00:00
d1a7880c77
2009-06-07 Pedro Alves <pedro@codesourcery.com>
...
* procfs.h: New.
* proc-utils.h (procfs_first_available): Don't declare here.
* sol-thread.c: Include procfs.h instead of sys/procfs.h and
proc-utils.h.
* procfs.c: Include procfs.h.
(procfs_target): Make it public. Don't register
procfs_can_use_hw_breakpoint here.
(proc_set_watchpoint): Check for PCWATCH or PIOCSWATCH being
defined instead of TARGET_HAS_HARDWARE_WATCHPOINTS.
(procfs_can_use_hw_breakpoint): Remove check of
TARGET_HAS_HARDWARE_WATCHPOINTS.
(procfs_use_watchpoints): Register procfs_can_use_hw_breakpoint
here.
(_initialize_procfs): Don't add the procfs target here.
* i386-sol2-nat.c: Include target.h and procfs.h.
(_initialize_amd64_sol2_nat): Install the procfs target here,
customized with watchpoints support.
* irix5-nat.c: Include target.h.
(_initialize_core_irix5): Rename to ...
(_initialize_irix5_nat): ... this. Install the procfs target
here, customized with watchpoints support.
* alpha-nat.c: Include procfs.h.
(_initialize_core_alpha): Rename to...
(_initialize_alpha_nat): ... this. Install the procfs target
here, customized with watchpoints support.
* sparc-sol2-nat.c: Include target.h and procfs.h.
(_initialize_sparc_sol2_nat): New.
* config/i386/nm-i386sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
* config/sparc/nm-sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
* config/mips/irix5.mh (NAT_FILE): Delete.
* config/mips/irix6.mh (NAT_FILE): Delete.
* config/mips/nm-irix5.h: Delete.
2009-06-07 Pedro Alves <pedro@codesourcery.com>
* gdbint.texinfo (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete all
references.
2009-06-07 22:33:25 +00:00
473f94e69c
* gdbint.texinfo: Rename formal parameters to gdbarch function
...
protoypes from "current_gdbarch" to "gdbarch".
2009-06-04 15:15:48 +00:00
8f5008704e
gdb
...
* python/python.c (gdbpy_parameter): Rename. Fix error message.
(GdbMethods): Change "get_parameter" to "parameter".
gdb/doc
* gdb.texinfo (Basic Python): Change get_parameter to parameter.
2009-05-28 16:49:55 +00:00
b631324398
gdb
...
2009-05-27 Vladimir Prus <vladimir@codesourcery.com>
Tom Tromey <tromey@redhat.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
* mi/mi-main.c (mi_cmd_list_features): List "python" feature.
* varobj.h (varobj_set_visualizer): Declare.
(varobj_get_display_hint): Likewise.
(varobj_update_result_t) <children_changed, value_installed>: New
fields.
* mi/mi-cmds.c (mi_cmds): Add var-set-visualizer.
* mi/mi-cmds.h (mi_cmd_var_set_visualizer,
mi_cmd_var_set_child_range): Declare.
* mi/mi-cmd-var.c (mi_cmd_var_set_visualizer): New function.
(mi_cmd_var_list_children): Emit display hint.
(varobj_update_one): Emit display hint. Handle dynamic children.
* python/python.c (GdbMethods): Add "default_visualizer".
* python/python-internal.h (apply_varobj_pretty_printer,
gdbpy_get_varobj_pretty_printer, gdbpy_get_display_hint):
Declare.
(gdbpy_default_visualizer): Likewise.
* varobj.c: Include python.h, python-internal.h.
(PyObject): New typedef.
(struct varobj) <children_requested, pretty_printer>: New fields.
(varobj_create): Call install_default_visualizer.
(instantiate_pretty_printer): New function.
(varobj_set_display_format): Update.
(varobj_get_display_hint): New function.
(update_dynamic_varobj_children): New function.
(varobj_get_num_children): Handle dynamic children.
(varobj_list_children): Likewise.
(install_new_value): Likewise.
(varobj_add_child): New function.
(install_visualizer): Likewise.
(install_default_visualizer): Likewise.
(varobj_set_visualizer): Likewise.
(varobj_update): Handle dynamic children.
(create_child): Use create_child_with_value.
(create_child_with_value): New function.
(value_get_print_value): Call pretty printer. Add value_formatter
argument.
(c_value_of_variable): Update.
(varobj_invalidate): Always free all_rootvarobj.
* python/python-prettyprint.c (apply_varobj_pretty_printer): New
function.
(gdbpy_get_varobj_pretty_printer): Likewise.
(gdbpy_default_visualizer): Likewise.
gdb/doc
2009-05-27 Tom Tromey <tromey@redhat.com>
* gdb.texinfo (GDB/MI Miscellaneous Commands): Document "python"
feature.
(GDB/MI Variable Objects): Document -var-set-visualizer.
gdb/testsuite
2009-05-27 Tom Tromey <tromey@redhat.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
* lib/mi-support.exp (mi_varobj_update_dynamic): New proc.
(mi_child_regexp): Likewise.
(mi_list_varobj_children_range): Likewise.
(mi_get_features): Likewise.
(mi_list_varobj_children): Rewrite.
* gdb.python/python-mi.exp: New file.
2009-05-28 01:09:20 +00:00
a6bac58e84
gdb
...
2009-05-27 Tom Tromey <tromey@redhat.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
Phil Muldoon <pmuldoon@redhat.com>
Paul Pluzhnikov <ppluzhnikov@google.com>
Vladimir Prus <vladimir@codesourcery.com>
* python/python-value.c (value_object_to_value): New function.
* python/python-internal.h: Include frameobject.h.
(gdbpy_children_cst, gdbpy_to_string_cst, gdbpy_display_hint_cst):
Declare.
(value_object_to_value): Declare.
* printcmd.c (struct format_data) <raw>: New field.
(last_format): Default to 0.
(decode_format): Initialize val.raw. Handle /r flag.
(print_command_1): Initialize fmt.raw and opts.raw.
(output_command): Likewise.
(x_command): Fix initialization of fmt.format. Initialize
fmt.raw.
(display_command): Initialize fmt.raw.
(do_one_display): Set opts.raw.
* python/python.c (gdbpy_to_string_cst, gdbpy_children_cst,
gdbpy_display_hint_cst): New globals.
(_initialize_python): Initialize them. Set gdb.pretty_printers.
* cp-valprint.c: Include python.h.
(cp_print_value): Call apply_val_pretty_printer.
* python/python.h (apply_val_pretty_printer): Declare.
* stack.c (print_this_frame_argument_p): Remove.
(print_frame_args): Compute summary flag. Don't use
print_this_frame_argument_p.
* valprint.c: Include python.h.
(user_print_options): Initialize new fields.
(scalar_type_p): New function.
(val_print): Handle 'raw' and 'summary' modes. Call
apply_val_pretty_printer.
(value_print): Handle 'raw' mode.
* valprint.h (struct value_print_options) <raw, summary>: New
fields.
* Makefile.in (SUBDIR_PYTHON_OBS): Add python-prettyprint.o
(SUBDIR_PYTHON_SRCS): Add python-prettyprint.c.
(python-prettyprint.o): New target.
* python/python-prettyprint.c: New file.
gdb/doc
2009-05-27 Tom Tromey <tromey@redhat.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
Phil Muldoon <pmuldoon@redhat.com>
* gdb.texinfo (Objfiles In Python): Reference pretty printing.
(Pretty Printing): New node.
(Selecting Pretty-Printers): Likewise.
(Python API): Update.
(Output Formats): Document /r format.
gdb/testsuite
2009-05-27 Tom Tromey <tromey@redhat.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
Phil Muldoon <pmuldoon@redhat.com>
Paul Pluzhnikov <ppluzhnikov@google.com>
* gdb.python/python-prettyprint.exp: New file.
* gdb.python/python-prettyprint.c: New file.
* gdb.python/python-prettyprint.py: New file.
* gdb.base/display.exp: print/r is now valid.
2009-05-28 01:05:14 +00:00
2c74e83381
gdb
...
2009-05-27 Tom Tromey <tromey@redhat.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
Phil Muldoon <pmuldoon@redhat.com>
Paul Pluzhnikov <ppluzhnikov@google.com>
* python/python.c (_initialize_python): Call
gdbpy_initialize_types.
(GdbMethods): Add "lookup_type".
* python/python-value.c (value_object) <type>: New field.
(valpy_dealloc): Decref type.
(valpy_new): Initialize type.
(valpy_get_type): New function.
(value_to_value_object): Initialize type.
(valpy_cast): New function.
(value_object_getset): Add "type".
(value_object_methods): Add "cast".
* python/python-internal.h (type_to_type_object): Declare.
(type_object_to_type): Likewise.
(gdbpy_initialize_types): Likewise.
(gdbpy_lookup_type): Declare.
* Makefile.in (SUBDIR_PYTHON_OBS): Add python-type.o.
(SUBDIR_PYTHON_SRCS): Add python-type.c.
(python-type.o): New target.
* python/python-type.c: New file.
gdb/doc
2009-05-27 Thiago Jung Bauermann <bauerman@br.ibm.com>
Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Types In Python): New node.
(Values From Inferior): "type" is now an attribute.
(Python API): Update.
gdb/testsuite
2009-05-27 Thiago Jung Bauermann <bauerman@br.ibm.com>
Tom Tromey <tromey@redhat.com>
Pedro Alves <pedro@codesourcery.com>
Paul Pluzhnikov <ppluzhnikov@google.com>
* gdb.python/python-template.exp: New file.
* gdb.python/python-template.cc: New file.
* gdb.python/python.exp (gdb_py_test_multiple): Add two objfile
tests.
* gdb.python/python-value.exp (py_objfile_tests): New proc.
Call it.
(test_value_after_death): New proc.
* gdb.python/python-value.c (PTR): New typedef.
(main): New variable 'x'.
2009-05-28 00:47:20 +00:00
89c73adef9
gdb
...
2009-04-01 Tom Tromey <tromey@redhat.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
Phil Muldoon <pmuldoon@redhat.com>
* python/python.c: Include objfiles.h, observer.h.
(gdbpy_auto_load): New global.
(gdbpy_current_objfile): Likewise.
(GDBPY_AUTO_FILENAME): New define.
(gdbpy_new_objfile): New function.
(gdbpy_get_current_objfile): Likewise.
(gdbpy_objfiles): Likewise.
(_initialize_python): Add "maint set auto-load". Call
gdbpy_initialize_objfile. Attach objfile observer.
(GdbMethods): New methods current_objfile, objfiles.
* python/python-objfile.c: New file.
* python/python-internal.h (objfile_to_objfile_object): Declare.
(objfpy_get_printers): Likewise.
(gdbpy_initialize_objfile): Likewise.
* Makefile.in (SUBDIR_PYTHON_OBS): Add python-objfile.o.
(SUBDIR_PYTHON_SRCS): Add python-objfile.c.
(python-objfile.o): New target.
gdb/doc
2009-04-01 Tom Tromey <tromey@redhat.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
* gdb.texinfo (Python API): Update.
(Auto-loading): New node.
(Objfiles In Python): New node.
gdb/testsuite
2009-04-06 Tom Tromey <tromey@redhat.com>
* gdb.python/python.exp (gdb_py_test_multiple): Add two objfile
tests.
* gdb.python/python-value.exp (py_objfile_tests): New proc.
Call it.
2009-05-28 00:40:24 +00:00
17a37d488c
2009-05-15 Paul Pluzhnikov <ppluzhnikov@google.com>
...
* NEWS: Mention set/show libthread-db-search-path.
* gdb_thread_db.h (LIBTHREAD_DB_SEARCH_PATH): New define.
(LIBTHREAD_DB_SO): Moved from linux-thread-db.c
* linux-thread-db.c (libthread_db_search_path): New setting.
(thread_db_handle): New variable (replaces using_thread_db).
(try_thread_db_load_1): New function.
(try_thread_db_load, thread_db_load_search): Likewise.
(dladdr_to_soname): Likewise.
(thread_db_load): Iterate over possibly multiple libthread_db's.
(check_for_thread_db): Attempt to load new libthread_db.
(thread_db_detach, thread_db_wait): Unload libthread_db.
(thread_db_mourn_inferior): Likewise.
(_initialize_thread_db): Add new libthread-db-search-path option.
Defer loading of libthread_db to check_for_thread_db.
* solib.c (libpthread_name_p): New function.
(libpthread_solib_p): Call it.
* solib.h (libpthread_name_p): New prototype.
2009-05-15 16:53:45 +00:00
6718376f8f
*** empty log message ***
2009-05-14 21:41:43 +00:00
cbe54154ef
gdb/
...
2009-05-12 Pedro Alves <pedro@codesourcery.com>
* cli/cli-decode.c (deprecated_add_set_cmd): Delete.
* command.h (deprecated_add_set_cmd): Delete declaration.
* gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
'set debug gnu-nat' and 'show debug gnu-nat'.
* i386-nat.c (_initialize_i386_nat): Replace 'maint
show-debug-registers' with 'maint set show-debug-registers' and
'maint show show-debug-registers'.
* mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
show-debug-registers' with 'maint set show-debug-registers' and
'maint show show-debug-registers'.
gdb/doc/
2009-05-12 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo: Document 'set/show debug gnu-nat'. Replace 'maint
show-debug-regs' docs by 'maint set show-debug-regs' and 'maint
show show-debug-regs' docs.
2009-05-12 16:51:13 +00:00
8e05493cd6
* gdb.texinfo (Process Record and Replay): Add description of
...
reverse execution.
2009-05-08 09:47:54 +00:00
b39f498814
* gdbint.texinfo (Adding support for debugging core files): New node.
...
(Native Debugging): Remove the ``Native core file Support'' section.
2009-05-07 18:40:44 +00:00
e346fb8f8e
Fix typo.
2009-05-06 23:43:41 +00:00
a2311334f7
* gdb.texinfo (Process Record and Replay): Improve and clarify.
...
Add index entries.
2009-05-01 09:11:25 +00:00
53cc454a92
* gdb.texinfo: Add documentation for process record and replay.
2009-04-30 03:24:48 +00:00
484086b7e0
gdb/
...
* macrocmd.c (info_macro_command): Print -Dname=value if LINE is zero.
gdb/doc/
* gdb.texinfo (Macros): Note command-line for `info macro'. Append
a new part on command-line defined macros.
gdb/testsuite/
* gdb.base/macscp.exp: New `options' parameter `-DFROM_COMMANDLINE'.
(info_macro): Remova `decimal' declaration. New variable `nonzero'.
Replace all uses of `decimal' by `nonzero'.
(info macro FROM_COMMANDLINE): New test.
2009-04-29 07:51:33 +00:00
32ae184288
* gdb.texinfo (Machine Code) <disassemble-next-line>: Improve and
...
clarify the wording.
2009-04-25 09:56:33 +00:00
b14b1491f2
gdb
...
2009-04-23 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
Tom Tromey <tromey@redhat.com>
* configure, config.in: Regenerate.
* configure.ac: Support for relocatable GDB datadir. Use
GDB_AC_WITH_DIR. Always define TARGET_SYSTEM_ROOT_RELOCATABLE.
* acinclude.m4 (GDB_AC_WITH_DIR): New defun.
* top.c (init_main): Add "set data-directory".
* defs.h (gdb_datadir): Declare.
* main.c (gdb_datadir): New global.
(captured_main): Initialize gdb_datadir. Use relocate_directory.
(relocate_path): New function.
(relocate_directory): Likewise.
(get_init_files): Use relocate_path.
(README): Mention --with-gdb-datadir.
gdb/doc
2009-04-23 Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Data Files): New node.
(GDB Files): Update menu.
2009-04-23 21:28:20 +00:00
5c1e86e191
* gdbint.texinfo (Defining Other Architecture Features): Remove
...
enty for PROCESS_LINENUMBER_HOOK.
2009-04-23 18:46:14 +00:00
83eba9b72c
* gdb.texinfo (GDB/MI Program Execution): Document -exec-jump.
2009-04-22 17:24:59 +00:00
e31198c47e
* gdb.texinfo (disassemble-next-line): Set the default of
...
disassemble-next-line to off.
2009-04-22 06:09:18 +00:00
26e251b603
gdb:
...
* configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
--with-htmldir): New.
* configure: Regenerate.
gdb/doc:
* configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
--with-htmldir): New.
* configure: Regenerate.
* Makefile.in (datarootdir, docdir): Define.
(gdb.dvi, gdb.pdf): Use same -I options as for building gdb.info
instead of $(SET_TEXINPUTS).
(gdbint.dvi, gdbint.pdf): Use same -I options as for building
gdbint.info instead of $(SET_TEXINPUTS).
(gdbint/index.html): Use same -I options as for building
gdbint.info.
(stabs.dvi, stabs.pdf): Use same -I options as for building
stabs.info instead of $(SET_TEXINPUTS).
(stabs/index.html): Use same -I options as for building
stabs.info.
(annotate.dvi, annotate.pdf): Use same -I options as for building
annotate.info instead of $(SET_TEXINPUTS).
(annotate/index.html): Use same -I options as for building
annotate.info.
2009-04-21 20:13:08 +00:00
eac35c4ebc
2009-04-21 David Daney <ddaney@caviumnetworks.com>
...
* gdb.texinfo (maint show-debug-regs): Remove mention of x86.
2009-04-21 16:31:06 +00:00
29b0e8a24a
gdb:
...
* configure.ac (--with-relocated-sources): New.
* configure, config.in: Regenerate.
* source.c (add_substitute_path_rule): Remove static.
* source.h (add_substitute_path_rule): Declare.
* main.c: Include "source.h".
(captured_main): Add substitution rule if RELOC_SRCDIR.
gdb/doc:
* gdb.texinfo (Source Path): Document --with-relocated-sources.
2009-04-21 10:13:05 +00:00
2b83188937
gdb:
...
2009-04-18 Carlos O'Donell <carlos@codesourcery.com>
* Makefile.in (MAKEHTML): Set to makeinfo --html.
(MAKEHTMLFLAGS): Set to empty.
gdb/doc:
2009-04-18 Carlos O'Donell <carlos@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* Makefile.in (MAKEHTML): Set to makeinfo --html.
(MAKEHTMLFLAGS): Set to empty.
(html__strip_dir): Define.
(HTMLFILES): Define.
(HTMLFILES_INSTALL): Define.
(install-html): Copy new automake rule.
(html): Depend on $(HTMLFILES).
(gdb_toc.html): Rename to gdb/index.html.
(gdbint_toc.html): Rename to gdbint/index.html.
(stabs_toc.html): Rename to stabs/index.html.
(annotate_toc.html): Rename to annotate/index.html.
2009-04-18 17:11:02 +00:00
89a34d1b2c
gdb:
...
2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
* configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
* configure: Regenerate.
* Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
configure substitutions.
(FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.
gdb/doc:
2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
* Makefile.in: Set pdfdir and htmldir from configure
substitutions.
* configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
* configure: Regenerate.
readline:
2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
* Makefile.in: Add html target. Add dummy install-html and
install-pdf targets.
sim:
2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
* Makefile.in: Add dummy install-pdf, html, and
install-html targets.
2009-04-17 17:44:05 +00:00
Ralf Wildenhues
Doug Evans
Nick Roberts
Eli Zaretskii
Vladimir Prus
Ulrich Weigand
Daniel Jacobowitz
Pedro Alves
Stan Shebs
Hui Zhu
Tom Tromey
Phil Muldoon
Paul Pluzhnikov
Joel Brobecker
Jan Kratochvil
Joseph Myers
David Daney