Implement most breakpoint_ops methods for all breakpoint types,
and move the default handlings to the proper callbacks.
gdb/
* breakpoint.c (update_watchpoint): Always call the breakpoint's
works_in_software_mode method.
(insert_bp_location): Go through breakpoint_ops->insert_location
for software and hardware watchpoints.
(create_internal_breakpoint): Pass bkpt_breakpoint_ops as
breakpoint_ops.
(remove_breakpoint_1): Go through breakpoint_ops->remove_location
for software and hardware watchpoints.
(print_it_typical): Delete.
(print_bp_stop_message): Always call the breakpoint_ops->print_it
method.
(watchpoint_check): Adjust comment.
(bpstat_check_location): Simply always call the breakpoint's
breakpoint_hit method.
(bpstat_stop_status): Always call the breakpoint's check_status
method. Remove special cases for watchpoints and internal event
breakpoints from here (moved to the check_status implementations).
(print_one_breakpoint_location): Assume b->ops is never NULL.
Remove static tracepoint marker id printing from here (moved to
the print_one_detail callback implementation of tracepoints).
(init_bp_location): Assert OPS is never NULL.
(allocate_bp_location): Always call the breakpoint's
allocate_location method, and remove the default code from here.
(free_bp_location): Always call the location's dtor method, and
remove the default code from here.
(init_raw_breakpoint_without_location): Assert OPS is never NULL.
(set_raw_breakpoint_without_location): Add new breakpoint_ops
parameter. Pass it down.
(set_raw_breakpoint): Ditto.
(print_it_catch_fork): Adjust to take a bpstat as argument.
(catch_fork_breakpoint_ops): Install methods.
(print_it_catch_vfork): Adjust to take a bpstat as argument.
(catch_vfork_breakpoint_ops): Install methods.
(dtor_catch_syscall): Call the base dtor.
(print_it_catch_syscall): Adjust to take a bpstat as argument.
(catch_syscall_breakpoint_ops): Install methods.
(dtor_catch_exec): Call the base dtor.
(print_it_catch_exec): Adjust to take a bpstat as argument.
(catch_exec_breakpoint_ops): Install methods.
(hw_breakpoint_used_count, hw_watchpoint_used_count): Always call
the breakpoint's resources_needed method, and remove the default
code from here.
(set_momentary_breakpoint): Pass bkpt_breakpoint_ops as
breakpoint_ops.
(clone_momentary_breakpoint): Clone the original's ops.
(mention): Always call the breakpoint's print_mention method, and
remove the default code from here.
(create_breakpoint_sal): Adjust to pass the ops to
set_raw_breakpoint rather than setting it manually.
(create_breakpoint): Assert ops is never NULL. Adjust to pass the
ops to set_raw_breakpoint_without_location rather than setting it
manually.
(break_command_1): Pass bkpt_breakpoint_ops as breakpoint_ops.
(print_it_ranged_breakpoint): Adjust to take a bpstat as argument.
(ranged_breakpoint_ops): Install methods.
(break_range_command): Adjust to pass the ops to
set_raw_breakpoint rather than setting it manually.
(re_set_watchpoint, breakpoint_hit_watchpoint)
(check_status_watchpoint, resources_needed_watchpoint)
(works_in_software_mode_watchpoint, print_it_watchpoint)
(print_mention_watchpoint, print_recreate_watchpoint): New
functions.
(watchpoint_breakpoint_ops): Install new methods.
(print_it_masked_watchpoint): New function.
(masked_watchpoint_breakpoint_ops): Install new methods.
(watch_command_1): Adjust to pass the right breakpoint_ops to
set_raw_breakpoint_without_location rather than setting it
manually later. Record the current pspace.
(print_it_exception_catchpoint): Adjust to take a bpstat as
argument.
(gnu_v3_exception_catchpoint_ops): Install new methods.
(say_where): New function.
(null_re_set, null_check_status, null_works_in_software_mode)
(null_resources_needed, null_print_one_detail, bp_location_dtor):
New functions.
(bp_location_ops): New global.
(bkpt_dtor, bkpt_allocate_location, bkpt_re_set)
(bkpt_insert_location, bkpt_remove_location, bkpt_breakpoint_hit)
(bkpt_check_status, bkpt_resources_needed)
(bkpt_works_in_software_mode, bkpt_print_it, bkpt_print_mention)
(bkpt_print_recreate): New functions.
(bkpt_breakpoint_ops): New global.
(tracepoint_re_set, tracepoint_insert_location)
(tracepoint_remove_location, tracepoint_breakpoint_hit)
(tracepoint_check_status, tracepoint_works_in_software_mode)
(tracepoint_print_it, tracepoint_print_one_detail)
(tracepoint_print_mention, tracepoint_print_recreate): New
functions.
(tracepoint_breakpoint_ops): New global.
(delete_breakpoint): Always call the breakpoint's dtor method, and
remove the default handling from here.
(breakpoint_re_set_default): Make static.
(breakpoint_re_set_one): Always call the breakpoints re_set
method, and remove the default handling from here.
(trace_command, ftrace_command, strace_command)
(create_tracepoint_from_upload): Pass appropriate breakpoints_ops
to create_breakpoint.
(save_breakpoints): Always call the breakpoint's print_recreate
method, and remove the default handling from here.
* ada-lang.c (dtor_exception): Call the base dtor.
(re_set_exception): Call the base method.
(print_it_exception, print_it_catch_exception): Adjust to take a
bpstat as argument.
(catch_exception_breakpoint_ops): Install methods.
(print_it_catch_exception_unhandled): Adjust to take a bpstat as
argument.
(catch_exception_unhandled_breakpoint_ops): Install methods.
(print_it_catch_assert): Adjust to take a bpstat as argument.
(catch_assert_breakpoint_ops): Install methods.
* breakpoint.h (struct breakpoint_ops): Adjust the print_it method
to take a bpstat as argument.
(enum print_stop_action): Add describing comments to each enum
value.
(breakpoint_re_set_default): Delete declaration.
(null_re_set, null_works_in_software_mode, null_resources_needed)
(null_check_status, null_print_one_detail): Declare.
(bkpt_breakpoint_ops): Declare.
(bkpt_dtor, bkpt_allocate_location, bkpt_re_set)
(bkpt_insert_location, bkpt_remove_location, bkpt_breakpoint_hit)
(bkpt_check_status, bkpt_resources_needed)
(bkpt_works_in_software_mode, bkpt_print_it)
(null_print_one_detail, bkpt_print_mention, bkpt_print_recreate):
Declare.
* mi/mi-cmd-break.c (mi_cmd_break_insert): Adjust to pass
bkpt_breakpoint_ops.
* python/py-breakpoint.c (bppy_init): Ditto.
gdb/
* infcmd.c: Include "inf-loop.h".
(step_once): When stepping into an inline subroutine, pretend the
target has run. If the target can async, switch the inferior
event loop to INF_EXEC_COMPLETE.
* inferior.h (user_visible_resume_ptid): Declare.
* infrun.c (user_visible_resume_ptid): New function, factored out
from `resume'.
(resume): Use it.
* mi/mi-main.c (mi_execute_async_cli_command): Remove assertion
that the current thread is running. Merge async and sync
branches.
* mi/mi-main.c (mi_cmd_execute): Use cleanup from
prepare_execute_command.
* top.c (prepare_execute_command): Return cleanup.
(execute_command): Use cleanup from prepare_execute_command.
* top.h (prepare_execute_command): Change prototype to return
cleanup.
* defs.h (struct value): Add opaque declaration.
(make_cleanup_value_free_to_mark): Add prototype.
* utils.c (do_value_free_to_mark): New function.
(make_cleanup_value_free_to_mark): Likewise.
gdb/testsuite/
* gdb.python/py-function.exp: Test setting a value from a function
which executes a command.
* gdbthread.h (print_thread_info): Change prototype.
* thread.c (print_thread_info): Accept char* instead of int for
requested_threads argument. Use new function number_is_in_list
to determine which threads to list.
(info_threads_command): Pass char* to print_thread_info.
* cli/cli-utils.c (number_is_in_list): New function.
* cli/cli-utils.h (number_is_in_list): Export.
* mi/mi-main.c (mi_cmd_thread_info): Pass char* to
print_thread_info.
(print_one_inferior): Ditto.
(mi_cmd_list_thread_groups): Ditto.
2011-02-21 Michael Snyder <msnyder@vmware.com>
* gdb.threads/thread-find.exp: Update patterns for changes in
output of "info threads" command.
gdb/
* disasm.c (dump_insns): Support dumping opcodes for MI.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Allow mode to control
dumping of instruction opcodes.
gdb/doc/
* gdb.texinfo (GDB/MI Data Manipulation): Update to reflect
changes in mi/mi-cmd-disas.c
gdb/testsuite/
* gdb.mi/mi-disassemble.exp, gdb.mi/mi2-disassemble.exp: Update
expected output to reflect changes in gdb/mi/mi-cmd-disas.c and
add new tests for opcode dumping.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Mark up error message
for i18n.
* tui/tui-layout.c (tui_set_layout_for_display_command):
Split line so that operator goes to beginning of line.
* tui/tui-winsource.c (tui_horizontal_source_scroll): Move
assignment out of if statement.
Rename and move inferior_thread_state and inferior_status.
* gdbthread.h (struct thread_control_state): New struct, move fields
step_range_start, step_range_end, step_frame_id, step_stack_frame_id,
trap_expected, proceed_to_finish, in_infcall, step_over_calls,
stop_step and stop_bpstat here from struct thread_info.
(struct thread_suspend_state): New struct, move field stop_signal here
from struct thread_info.
(struct thread_info): Move the fields above from this struct.
* inferior.h: Move the inferior_thread_state and inferior_status
declarations comment to their definitions at infrun.c.
(struct inferior_control_state): New struct, move field stop_soon from
struct inferior here.
(struct inferior_suspend_state): New empty struct.
(struct inferior): New fields control and suspend. Move out field
stop_soon.
* infrun.c (struct inferior_thread_state): Rename to ...
(infcall_suspend_state): ... here. Replace field stop_signal by
fields thread_suspend and inferior_suspend.
(save_inferior_thread_state): Rename to ...
(save_infcall_suspend_state): ... here. New variable inf. Update the
code for new fields.
(restore_inferior_thread_state): Rename to ...
(restore_infcall_suspend_state): ... here. New variable inf. Update
the code for new fields.
(do_restore_inferior_thread_state_cleanup): Rename to ...
(do_restore_infcall_suspend_state_cleanup): ... here.
(make_cleanup_restore_inferior_thread_state): Rename to ...
(make_cleanup_restore_infcall_suspend_state): ... here.
(discard_inferior_thread_state): Rename to ...
(discard_infcall_suspend_state): ... here.
(get_inferior_thread_state_regcache): Rename to ...
(get_infcall_suspend_state_regcache): ... here.
(struct inferior_status): Rename to ...
(struct infcall_control_state): ... here. Replace fields
step_range_start, step_range_end, step_frame_id, step_stack_frame_id,
trap_expected, proceed_to_finish, in_infcall, step_over_calls,
stop_step, stop_bpstat and stop_soon by fields thread_control and
inferior_control.
(save_inferior_status): Rename to ...
(save_infcall_control_state): ... here. Update the code for new
fields.
(restore_inferior_status): Rename to ...
(restore_infcall_control_state): ... here. Update the code for new
fields.
(do_restore_inferior_status_cleanup): Rename to ...
(do_restore_infcall_control_state_cleanup): ... here.
(make_cleanup_restore_inferior_status): Rename to ...
(make_cleanup_restore_infcall_control_state): ... here.
(discard_inferior_status): Rename to ...
(discard_infcall_control_state): ... here.
* alpha-tdep.c, breakpoint.c, dummy-frame.c, dummy-frame.h,
exceptions.c, fbsd-nat.c, gdbthread.h, infcall.c, infcmd.c,
inferior.c, inferior.h, infrun.c, linux-nat.c, mi/mi-interp.c,
mips-tdep.c, procfs.c, solib-irix.c, solib-osf.c, solib-spu.c,
solib-sunos.c, solib-svr4.c, thread.c, windows-nat.c: Update all the
references to the moved fields and renamed functions.
* python/py-breakpoint.c (BPPY_REQUIRE_VALID): Check if bp is
NULL.
(BPPY_SET_REQUIRE_VALID): Ditto.
(bpnum_is_valid): Delete function.
(bppy_get_visibility): New function.
(bppy_new): Parse for, and validate internal keyword. Pass
internal keyword to breakpoint or watchpoint functions.
(build_bp_list): New function.
(gdbpy_breakpoints): Rewrite. Use build_bp_list and
iterate_over_breakpoints.
(gdbpy_breakpoint_created): Rewrite. Do not store breakpoints in a
look-aside vector.
(gdbpy_breakpoint_deleted): Rewrite, defer breakpoint management
to internal breakpoint chain.
* breakpoint.c (set_breakpoint_number): New function.
(breakpoint_1): Check if breakpoint number is more than zero.
(set_raw_breakpoint_without_location): Set py_bp_object to NULL.
(create_breakpoint_sal): Take a new parameter called internal.
Call set_breakpoint_number with internal parameter. Do not
mention internal breakpoints. All callers updated.
(create_breakpoint): Ditto.
(create_breakpoints_sal): Ditto.
(watch_command_1): Ditto.
(watch_command_wrapper): Take a new parameter called internal.
All callers updated.
(rwatch_command_wrapper): Ditto.
(awatch_command_wrapper): Ditto.
(save_breakpoints): Update breakpoint save condition check.
(iterate_over_breakpoints): New function.
* breakpoint.h: Add conditional python includes. Add py_bp_object
and comment to struct breakpoint. Update all callers.
* defs.h: Add PyObject definition for GDB builds without Python.
2010-11-11 Phil Muldoon <pmuldoon@redhat.com>
* gdb.texinfo (Breakpoints In Python): Document "internal"
parameter, and visible attribute.
2010-11-11 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-breakpoint.exp: Add internal watchpoint and
breakpoint tests.
PR mi/11407
* mi/mi-cmd-stack.c (list_args_or_locals): Catch exceptions from
read_var_value and common_val_print and print a warning.
2010-09-16 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
PR mi/11407
* gdb.mi/dw2-ref-missing-frame-func.c: New File.
* gdb.mi/dw2-ref-missing-frame-main.c New File.
* gdb.mi/dw2-ref-missing-frame.S New File.
* gdb.mi/dw2-ref-missing-frame.exp New File.
as a feature reported by -list-target-features.
* gdb.texinfo (GDB/MI Miscellaneous Commands): Document new
feature `reverse' output by -list-target-features.
* mi/mi-cmd-break.c: White space.
* mi/mi-cmd-env.c: White space.
* mi/mi-cmds.c: White space.
* mi/mi-cmd-stack.c: White space.
* mi/mi-cmd-var.c: White space.
* mi/mi-console.c: White space.
* mi/mi-getopt.c: White space.
* mi/mi-interp.c: White space.
* mi/mi-main.c: White space.
* mi/mi-out.c: White space.
* mi/mi-parse.c: White space.
Nathan Sidwell <nathan@codesourcery.com>
* breakpoint.c (breakpoint_1): Add filter argument, return number of
breakpoints printed.
(is_hardware_watchpoint): Make argument const.
(is_watchpoint): Ditto.
(is_tracepoint): Merge of tracepoint_type and breakpoint_is_tracepoint,
use it everywhere.
(breakpoints_info): Pass NULL to breakpoint_1.
(maintenance_info_breakpoints): Ditto.
(watchpoints_info): New function.
(tracepoints_info): Use breakpoint_1 filter.
(set_ignore_count): Warn that tracepoint ignore count will be ignored.
(_initialize_breakpoint): Make "info watchpoints" its own command.
* breakpoint.h (is_tracepoint): Rename from breakpoint_is_tracepoint.
* mi/mi-cmd-break.c (mi_cmd_break_commands): Use is_tracepoint.
* gdb.texinfo (Setting Breakpoints): "info watch" no longer a synonym.
(Setting Watchpoints): Update description of "info watch".
(Disabling Breakpoints): Only "info break" lists all.
* gdb.base/completion.exp: Update for new "info watchpoints".
* gdb.base/default.exp: Ditto.
* gdb.base/help.exp: Ditto.
* gdb.base/watchpoint.exp: Ditto.
* gdb.trace/infotrace.exp: Update "info tracpoints" output.
Pedro Alves
Thiago Jung Bauermann
Tom Tromey
Vladimir Prus
Pierre Muller
Michael Snyder
Andrew Burgess
Joel Brobecker
Marc Khouzam
Jan Kratochvil
Phil Muldoon
Stan Shebs