From Daniel Berlin <dberlin@redhat.com> :
* symtab.c (lookup_symbol_aux): New function. Renamed from
lookup_symbol. Move code to do demangling/case sensitivity to
lookup_symbol().
(lookup_symbol): Now wrapper for lookup_symbol_aux, so we can
perform case sensitivity/demangling without leaking memory. Move
code to do demangling/case sensitivity from old_lookup_symbol to
here.
(lookup_partial_symbol): Use SYMBOL_SOURCE_NAME instead of
SYMBOL_NAME.
(lookup_block_symbol): Use SYMBOL_SOURCE_NAME instead of
SYMBOL_NAME. Don't do linear search in case of C++.
* symfile.c (compare_symbols): Use SYMBOL_SOURCE_NAME instead of
SYMBOL_NAME.
(compare_psymbols): Same here.
* objfiles.h (SECT_OFF_BSS): Don't detect invalid sect_index_bss
here, let the users of the macro do it.
* symtab.h (ANOFFSET): Detect here if the section index is not
initialized.
* xcoffread.c (find_targ_sec): Don't treat .bss as special,
because some objfiles may not have that section at all.
* coffread.c (cs_to_section): Ditto.
* elfread.c (elf_symtab_read): Detect an uninitialized index
value.
(elfstab_offset_sections): The macro ANOFFSET cannot be used as an
lvalue anymore.
* remote.c (get_offsets, remote_cisco_objfile_relocate): Don't use
ANOFFSET as an lvalue.
* objfiles.c (objfile_relocate, objfile_relocate): Don't use
ANOFFSET as an lvalue.
* symfile.c (default_symfile_offsets): Don't use ANOFFSET as an
lvalue.
support. Incorporate most of tm-rs6000.h.
(find_toc_address_hook): Rename to rs6000_find_toc_address_hook.
(rs6000_set_host_arch_hook): Declare.
(read_memory_addr): Define.
(pop_frame): Rename to rs6000_pop_frame.
(rs6000_pop_frame, rs6000_fix_call_dummy, rs6000_push_arguments,
rs6000_frame_saved_pc, rs6000_frame_chain): Remove non-generic
dummy frame handling.
(branch_dest, rs6000_pop_frame, rs6000_skip_trampoline_code,
rs6000_frame_saved_pc, frame_get_saved_regs,
frame_initial_stack_address, rs6000_frame_chain,
rs6000_convert_from_func_ptr_addr): Call read_memory_addr instead
of read_memory_integer.
(branch_dest, rs6000_pop_frame, rs6000_push_arguments,
rs6000_skip_trampoline_code, rs6000_frame_saved_pc,
frame_get_saved_regs, frame_initial_stack_address,
rs6000_frame_chain): Replace 4 with TDEP->wordsize.
(skip_prologue): Recognize some 64-bit stack adjustments.
(push_dummy_frame, pop_dummy_frame, set_processor,
show_processor): Delete.
(frame_get_saved_regs): Manipulate saved register addresses using
CORE_ADDR instead of int.
(rs6000_create_inferior): New function.
(register_names_*[]): Change to struct reg registers_*[].
(variants[]): Assimilate into multi-arch approach.
(register_names_*[], variants[]): Refer to pre-PowerPC
architectures as POWER instead of RS6000.
* rs6000-nat.c: Ubiquitous changes for 64-bit support.
(vmap_secs, xcoff_relocate_symtab): Cast addresses
to unsigned long to avoid sign-extension errors.
(set_host_arch): New function.
(xcoff_relocate_symtab): Try disabling usleep(36000) workaround.
(rs6000_core_fns): Use new bfd_target_xcoff_flavour.
(_initialize_core_rs6000): Initialize rs6000_set_host_arch_hook.
* symfile.c (find_sym_fns): Remove special xcoff kludge.
* xcoffread.c (secnum_to_bfd_section): Initialize args.objfile.
(process_linenos): Query line struct size from coff
backend instead of using compile-time constant.
(enter_line_range): Likewise.
(read_xcoff_symtab): Pass "XCOFF64" instead of "XCOFF" to
record_debugformat() if appropriate.
(process_xcoff_symbol): Access symbol addresses using
SYMBOL_VALUE_ADDRESS instead of SYMBOL_VALUE.
(read_symbol_lineno): Retrieve XCOFF64 symbol names from strtbl.
(scan_xcoff_symtab): Likewise. Query syment struct size from
coff backend instead of using compile-time constant.
(xcoff_sym_fns): Set flavour to bfd_target_xcoff_flavour.
* Makefile.in (INTERNAL_LDFLAGS): Add $(MH_LDFLAGS) to list of flags
that this Makefile variable get set to. (From Kevin Buettner.)
* config/powerpc/aix.mh (MH_LDFLAGS): Add linker flags so that
the TOC doesn't overflow. (From Kevin Buettner.)
* config/powerpc/tm-ppc-aix.h: Move config decisions to
multi-arched rs6000-tdep.c.
* config/rs6000/tm-rs6000.h: Likewise.
(GDB_MULTI_ARCH): Define.
(skip_trampoline_code): Rename to rs6000_skip_trampoline_code.
(is_magic_function_pointer): Replace with
rs6000_convert_from_func_ptr_addr.
(TARGET_CREATE_INFERIOR_HOOK): Define.
(find_toc_address_hook): Rename to rs6000_find_toc_address_hook.
(rs6000_set_host_arch_hook): Declare.
* config/rs6000/nm-rs6000.h (CHILD_XFER_MEMORY): Define.
* symfile.h (struct section_addr_info ): Remove fields for special
treatment of .text, .data and .bss sections.
* solib.c (symbol_add_stub): The special field text_addr is not
available anymore. Search for the .text field the hard way.
* symfile.c (build_section_addr_info_from_section_table): Don't
fill in {text, data, bss}_addr any more.
(default_symfile_offsets): Don't use {text, data, bss}_addr fields
to fill in section_offsets for objfile.
(syms_from_objfile): Don't deal with {text, data, bss}_addr as a
special case anymore.
(add_symbol_file_command): Ditto.
* symfile.c (add_symbol_file_command): Rewrite the arguments
processing part. Simplify syntax of command. Remove support for
rombug.
(_initialize_symfile): Update help message for add-symbol-file
command.
* symtab.h (struct symtab): Remove EXTRA_SYMTAB_INFO hook,
not currently used.
* symfile.c (allocate_symtab): Deprecate use of
INIT_EXTRA_SYMTAB_INFO here.
(TARGET_READ_FP): Define to d10v_read_fp rather than d10v_read_sp.
(TARGET_WRITE_FP): Define to d10v_write_fp rather than d10v_write_sp.
(d10v_write_fp, d10v_read_fp): Add prototypes.
* symtab.c (decode_line_1): Remove assignment of sals[0].pc field.
* symfile.c (simple_overlay_update, simple_overlay_update_1):
Ignore the size of overlay sections. This check is redundant anyway.
* printcmd.c (print_frame_args): Ditto.
* valops.c (value_fetch_lazy): Ditto.
* values.c (unpack_long): Ditto.
* d10v-tdep.c (d10v_frame_chain, d10v_frame_find_saved_regs,
d10v_init_extra_frame_info): Fix some minor bugs so the finish command
works properly.
(show_regs): Change num1 and num2 types from "long long" to "LONGEST".
(d10v_read_fp, d10v_write_fp): New functions.
(d10v_push_arguments): Remove unneeded assigns to "val" and "contents".
(d10v_push_arguments): Fix for pointers and structs.
(d10v_extract_return_value): Fix for pointers and chars.
* symfile.c (symfile_bfd_open):
* exec.c (exec_file_command): for __GO32__ and __WIN32__ systems,
free the user from having to type the .exe extension.
* coffread.c (record_minimal_symbol): Don't presave name string
on symbol_obstack before passing to prim_record_minimal_symbol.
It now handles saving the string itself.
* dbxread.c (read_dbx_dynamic_symtab): Ditto.
* mipsread.c (read_alphacoff_dynamic_symtab): Ditto.
* os9kread.c (record_minimal_symbol): Ditto.
* solib.c (solib_add_common_symbols): Ditto.
* coffread.c (coff_symtab_read): Don't presave name string on
symbol_obstack before passing to prim_record_minimal_symbol_and_info.
It now handles saving the string itself.
* dbxread.c (record_minimal_symbol): Ditto.
* elfread.c (record_minimal_symbol_and_info): Ditto.
* dstread.c (record_minimal_symbol): Remove static function that just
called prim_record_minimal_symbol with the same args (after change to
prim_record_minimal_symbol to do it's own name string saves).
* nlmread.c (record_minimal_symbol): Ditto.
* somread.c (record_minimal_symbol): Ditto.
* hpread.c (hpread_read_enum_type): Save symbol name on symbol obstack.
(hpread_read_function_type): Ditto.
(hpread_process_one_debug_symbol): Ditto.
* mdebugread.c (parse_symbol): Ditto.
(new_symbol): Ditto.
* minsyms.c (prim_record_minimal_symbol_and_info): Ditto.
* coffread.c (process_coff_symbol): Use obsavestring to save
SYMBOL_NAME, rather than obstack_copy0.
* dstread.c (create_new_symbol): Ditto
* symfile.c (obconcat): Ditto.
* stabsread.c (patch_block_stabs): Ditto.
* xcoffread.c (SYMNAME_ALLOC): Ditto.
* symfile.c (obsavestring): Update comments
* solib.c (solib_add_common_symbols): Remove local var origname.
* monitor.h,monitor.c:
Added monitor flags MO_NO_ECHO_ON_SETMEM (don't expect echo on
setmem command), MO_RUN_FIRST_TIME (if command to start process
running on target is different from one to continue execution),
MO_HEX_PREFIX (if addresses from monitor have a "0x" prefix).
* monitor.c,parse.c,sparc-tdep.c:
Don't require strings in the registers array. This is to allow
NULLs to be place holders in the tm-*.h file so that only minor
changes are needed when a new processor is introduced (eg, one
without floating point).
* sparc-tdep.c: Conditionally remove dependancies on floating point.
* sparclet-rom.c,config/sparc/sparclet.mt,config/sparc/tm-sparclet.h:
New files for target sparclet.
* symfile.c: Add option for 2nd parameter on load command : a load
offset added to the vma of each section.
Elena Zannoni
David Anderson
Kevin Buettner
Pierre Muller
Nicholas Duffek
Andrew Cagney
Eli Zaretskii
Michael Snyder
Jason Molenda
Stan Shebs
David Taylor
Keith Seitz
Per Bothner
Fred Fish
David Edelsohn
Geoffrey Noer
Mark Alexander
Dawn Perchik