* mips.h: Remove documentation of "+D" and "+T".
opcodes/
* mips-opc.c (mips_builtin_opcodes): Remove "+D" and "+T" entries.
* micromips-opc.c (micromips_opcodes): Likewise.
* mips-dis.c (print_insn_args, print_insn_micromips): Remove "+D"
and "+T" handling. Check for a "0" suffix when deciding whether to
use coprocessor 0 names. In that case, also check for ",H" selectors.
gas/
* config/tc-mips.c (validate_mips_insn, validate_micromips_insn)
(mips_ip): Remove "+D" and "+T" handling.
gas/testsuite/
* gas/mips/lb.d, gas/mips/sb.d: Use coprocessor register names
for LWC0 and SWC0.
ARM uses @ as a comment character, but % seems to be usable by all
existing ifunc enabled architectures.
gdb/testsuite/ChangeLog:
2013-07-05 Will Newton <will.newton@linaro.org>
* gdb.base/gnu-ifunc-lib.c: Use %function instead of @function
in asm syntax to allow building on ARM.
bfd/
* elf32-s390.c: Rewrite GOT accesses using larl if possible.
* elf64-s390.c: Likewise.
ld/testsuite/
* ld-s390/gotreloc-1.s: New file.
* ld-s390/gotreloc-1.ver: New file.
* ld-s390/gotreloc_31-1.dd: New file.
* ld-s390/gotreloc_64-1.dd: New file.
* ld-s390/s390.exp: Run the new tests. Run 31 bit tests also on 64
bit.
opcodes/
* s390-opc.c (J12_12, J24_24): New macros.
(INSTR_MII_UPI): Rename to INSTR_MII_UPP.
(MASK_MII_UPI): Rename to MASK_MII_UPP.
* s390-opc.txt: Rename MII_UPI to MII_UPP for bprp instruction.
include/elf/
* s390.h: Add new relocs R_390_PC12DBL, R_390_PLT12DBL,
R_390_PC24DBL, and R_390_PLT24DBL.
gas/testsuite/
* gas/s390/zarch-zEC12.s: Change bprp second operand and add
variants requiring relocations.
* gas/s390/zarch-zEC12.d: Likewise.
gas/
* config/tc-s390.c (md_gather_operands, md_apply_fix): Support new
relocs.
bfd/
* elf32-s390.c: Add new relocation definitions R_390_PC12DBL,
R_390_PLT12DBL, R_390_PC24DBL, and R_390_PLT24DBL.
(elf_s390_reloc_type_lookup, elf_s390_check_relocs)
(elf_s390_gc_sweep_hook, elf_s390_relocate_section): Support new
relocations.
* elf64-s390.c: See elf32-s390.c
* bfd-in2.h: Add new relocs to enum bfd_reloc_code_real.
* libbfd.h: Add new reloc strings.
Allocate the value as optimized out from the start rather than allocating
a value with contents, and then marking it optimized out.
gdb/
2013-07-04 Pedro Alves <palves@redhat.com>
* findvar.c (value_of_register): Use allocate_optimized_out_value
if the register has been optimized out, instead of
set_value_optimized_out.
* frame-unwind.c (frame_unwind_got_optimized): Use
allocate_optimized_out_value.
Doing something else, I factored out the bits of the value_bits_valid
function that actually handle the check_validity hook, and
surprisingly found out that the result was misbehaving. Turns out
value_bits_valid has a latent bug. If the value is not lval_computed,
or doesn't have a check_validity hook, then we should assume the value
is entirely valid, not invalid. This is currently masked by the
value->optimized_out check -- I ran the testsuite with a gdb_assert(0)
inserted in place of that return being touched by the patch, and it
never triggers.
Tested on x86_64 Fedora 17.
gdb/
2013-07-04 Pedro Alves <palves@redhat.com>
* value.c (value_bits_valid): If the value is not lval_computed,
or doesn't have a check_validity hook, assume the value is entirely
valid.
gdb/ChangeLog
* stack.c (read_frame_arg): No longer fetch lazy values.
* value.c (value_optimized_out): If the value is not already
marked optimized out, and is lazy then fetch it.
(value_primitive_field): Move optimized out check to later in the
function, after we have loaded any lazy values.
(value_fetch_lazy): Use optimized out flag directly rather than
calling optimized_out method.
gdb/testsuite/ChangeLog
* gdb.dwarf2/dw2-reg-undefined.exp: New file.
* gdb.dwarf2/dw2-reg-undefined.c: Likewise.
* gdb.dwarf2/dw2-reg-undefined.S: Likewise.
* valops.c: Don't include "user-regs.h".
(value_fetch_lazy): Moved to value.c.
* value.c: Include "user-regs.h".
(value_fetch_lazy): Moved from valops.c.
2013-07-04 Yao Qi <yao@codesourcery.com>
Revert:
2013-06-27 Yao Qi <yao@codesourcery.com>
* common/create-version.sh: Update comments. Handle the case
that TARGET_ALIAS is empty.
gdb/gdbserver/
2013-07-04 Yao Qi <yao@codesourcery.com>
* Makefile.in (host_alias): Use @host_noncanonical@.
(target_alias): Use @target_noncanonical@.
* configure.ac: Use ACX_NONCANONICAL_TARGET and
ACX_NONCANONICAL_HOST.
* configure: Regenerated.
Revert:
2013-06-28 Mircea Gherzan <mircea.gherzan@intel.com>
* configure.ac (version_host, version_target): Set and AC_SUBST them.
* configure: Rebuild.
* Makefile.in (version_host, version_target): Get from configure.
(version.c): Use $(version_host) and $(version_target).
This factors --enable-libmcheck related bits from GDB's configure.ac
and makes GDBserver use them too. Specifically, the 'development'
global is moved to a separate script to it can be sourced by both GDB
and GDBserver, and the --enable-libmcheck/--disable-libmcheck bits
proper are moved to a new m4 file.
I started out by defining 'development' in the m4 file, but in the end
decided against it, as a separate script has the advantage that
changing it in release branches does not require regenerating
configure, unlike today.
I had also started out by making the new GDB_AC_LIBMCHECK itself
handle the yes/no default fallback depending on release/developement,
but since I had split out 'development' to a separate script, and, GDB
needs the python checks anyway (hence we'd need to do the python
checks in gdb's configure.ac, and pass in a 'default lmcheck yes/no'
parameter to GDB_AC_LIBMCHECK anyway), I ended up keeping
GDB_AC_LIBMCHECK isolated from the 'development' global. IOW, it's
the caller's business to handle it.
Tested on x86_64 Fedora 17. Built GDB and GDBserver with and without
--enable-libmcheck, and observed --enable-libmcheck overrides the
disablement of -lmcheck caused by python supporting threads, and that
GDBserver links with -lmcheck when expected. Also observed that
changing the 'development' global, and issuing "make" triggers a
relink, and '-lmcheck' is included or not from the link accordingly.
gdb/
2013-07-03 Pedro Alves <palves@redhat.com>
* Makefile.in (config.status): Depend on development.sh.
(aclocal_m4_deps): Add libmcheck.m4.
* acinclude.m4: Include libmcheck.m4.
* configure.ac: Source development.sh instead of setting
'development' here. --enable-libmcheck/--disable-libmcheck code
factored out to GDB_AC_LIBMCHECK. Run it.
* development.sh: New file.
* libmcheck.m4: New file.
* configure: Regenerate.
gdb/gdbserver/
2013-07-03 Pedro Alves <palves@redhat.com>
* Makefile.in (config.status): Depend on development.sh.
* acinclude.m4: Include libmcheck.m4.
* configure: Regenerate.
* elf64-ppc.c (struct ppc_stub_hash_entry): Delete "addend".
(ppc64_elf_size_stubs): Don't set "addend".
(ppc64_elf_relocate_section): Don't allow calls via
toc-adjusting stubs without a following nop even in an
executable, except for self-calls and both libc_start_main
and .libc_start_main.
gold/
* powerpc.cc (Target_powerpc::Relocate::relocate): Update self-call
comment.
The documentation refers to "target nrom", but this target doesn't
appear in the tree. It was zapped here:
2002-12-16 Andrew Cagney <ac131313@redhat.com>
[...]
* remote-nrom.c, remote-os9k.c, remote-vx960.c: Delete.
This patch removes the reference from the documentation.
* gdb.texinfo (Target Commands): Don't mention "target nrom".
2013-06-25 Mircea Gherzan <mircea.gherzan@intel.com>
gdbserver/
* notif.h (notif_event): Add a dummy member to avoid compiler
errors.
Change-Id: I490dbdb70a24f52b3947371f7c0397bf7a18423c
Signed-off-by: Mircea Gherzan <mircea.gherzan@intel.com>
* elf64-ppc.c (ppc64_elf_relocate_section): Set "relocation" for
.TOC. after relocatable check.
gas/
* config/tc-ppc.c (ppc_elf_adjust_symtab): Don't make .TOC. weak.
* dwarf_reader.cc (Dwarf_ranges_table::read_ranges_table): Save
reloc_type_.
(Dwarf_ranges_table::read_range_list): Call lookup_reloc.
(Dwarf_ranges_table::lookup_reloc): New function.
* dwarf_reader.h (Dwarf_ranges_table::Dwarf_ranges_table): Initialize
reloc_type_.
(Dwarf_ranges_table::lookup_reloc): New function.
(Dwarf_ranges_table::reloc_type_): New data member.
BFD recently got a few functions related to "dwz" files. This patch
changes gdb to use them, just to share a bit more code.
This changes dwarf2_get_dwz_file to possibly return NULL. This
simplified a bit of code elsewhere.
Built and regtested on x86-64 Fedora 18. I specifically regtested it
using my pending dwz test case.
* dwarf2read.c (dwarf2_get_dwz_file): Return NULL if
.gnu_debugaltlink not found. Use bfd_get_alt_debug_link_info.
(dwarf2_read_index, create_all_comp_units): Update.
This adds -Wold-style-definition to gdb's list of warnings. This
found a couple of spots where "()" was used where "(void)" is more
correct.
Tested by rebuilding on x86-64 Fedora 18.
* configure.ac (build_warnings): Add -Wold-style-definition.
* configure: Rebuild.
* machoread.c (_initialize_machoread): Use "(void)".
* macrocmd.c (macro_inform_no_debuginfo): Fix formatting;
use "(void)".
Richard Sandiford
Yao Qi
Alan Modra
Eli Zaretskii
Luis Machado
Will Newton
Tristan Gingold
Andreas Krebbel
Pedro Alves
Andrew Burgess
Marcus Shawcroft
Jan Kratochvil
Tom Tromey
Mircea Gherzan
Cary Coutant