4c28f408df
Non-stop linux native.
...
* linux-nat.c (linux_test_for_tracefork): Block events while we're
here.
(get_pending_status): Implement non-stop mode.
(linux_nat_detach): Stop threads before detaching.
(linux_nat_resume): In non-stop mode, always resume only a single
PTID.
(linux_handle_extended_wait): On a clone event, in non-stop mode,
add new lwp to GDB's thread table, and mark as running, executing
and stopped appropriately.
(linux_nat_filter_event): Don't assume there are other running
threads when a thread exits.
(linux_nat_wait): Mark the main thread as running and executing.
In non-stop mode, don't stop all lwps.
(linux_nat_kill): Stop lwps before killing them.
(linux_nat_thread_alive): Use signal 0 to detect if a thread is
alive.
(send_sigint_callback): New.
(linux_nat_stop): New.
(linux_nat_add_target): Set to_stop to linux_nat_stop.
* linux-nat.h (thread_db_attach_lwp): Declare.
* linux-thread-db.c (thread_get_info_callback): Check for new
threads if we have none.
(thread_from_lwp, enable_thread_event): Set proc_handle.pid to the
stopped lwp. Check for new threads if we have none.
(thread_db_attach_lwp): New.
(thread_db_init): Set proc_handle.pid to inferior_ptid.
(check_event): Set proc_handle.pid to the stopped lwp.
(thread_db_find_new_threads): Set proc_handle.pid to any stopped
lwp available, bail out if there is none.
* linux-fork.c (linux_fork_killall): Use SIGKILL instead of
PTRACE_KILL.
2008-07-10 22:58:37 +00:00
74960c6002
* breakpoint.h (bp_location_p): New typedef.
...
Register a vector of bp_location_p.
* breakpoint.c (always_inserted_mode)
(show_always_inserted_mode): New.
(unlink_locations_from_global_list): Remove.
(update_global_location_list)
(update_global_location_list_nothrow): New.
(update_watchpoint): Don't free locations.
(should_insert_location): New.
(insert_bp_location): Use should_insert_location.
(insert_breakpoint_locations): Copied from
insert_breakpoints.
(insert_breakpoint): Use insert_breakpoint_locations.
(bpstat_stop_status): Call update_global_location_list
when disabling breakpoint.
(allocate_bp_location): Don't add to bp_location_chain.
(set_raw_breakpoint)
(create_longjmp_breakpoint, enable_longjmp_breakpoint)
(disable_longjmp_breakpoint, create_overlay_event_breakpoint)
(enable_overlay_breakpoints, disable_overlay_breakpoints)
(set_longjmp_resume_breakpoint)
(enable_watchpoints_after_interactive_call_stop)
(disable_watchpoints_before_interactive_call_start)
(create_internal_breakpoint)
(create_fork_vfork_event_catchpoint)
(create_exec_event_catchpoint, set_momentary_breakpoint)
(create_breakpoints, break_command_1, watch_command_1)
(create_exception_catchpoint)
(handle_gnu_v3_exceptions)
(disable_breakpoint, breakpoint_re_set_one)
(create_thread_event_breakpoint, create_solib_event_breakpoint)
(create_ada_exception_breakpoint): : Don't call check_duplicates.
Call update_global_location_list.
(delete_breakpoint): Don't remove locations and don't
try to reinsert them. Call update_global_location_list.
(update_breakpoint_locations): Likewise.
(restore_always_inserted_mode): New.
(update_breakpoints_after_exec): Temporary disable
always inserted mode.
* Makefile.in: Update dependencies.
* infrun.c (proceed): Remove breakpoints while stepping
over breakpoint.
(handle_inferior_event): Don't remove or insert
breakpoints.
* linux-fork.c (checkpoint_command): Remove breakpoints
before fork and insert after.
(linux_fork_context): Remove breakpoints before switch
and insert after.
* target.c (target_disconnect, target_detach): Remove
breakpoints from target.
2008-04-24 10:21:45 +00:00
ed49a04fe1
* exec.c: #include "arch-utils.h"
...
(print_section_info): Use gdbarch_from_bfd to get at the
current architecture. Replace current_gdbarch. Fix indention.
Replace deprecated_print_address_numeric by paddress.
* Makefile.in (exec.o) Add dependency to arch-utils.h.
* valprint.c (val_print_string): Replace
deprecated_print_address_numeric.
* tracepoint.c (trace_mention, scope_info): Likewise.
* symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1, print_symbol)
(print_symbol, print_partial_symbols, maintenance_info_psymtabs)
(maintenance_check_symtabs): Likewise.
* symfile.c (list_overlays_command): Likewise.
* stack.c (frame_info, print_block_frame_labels): Likewise.
* printcmd.c (print_address, print_address_demangle)
(address_info): Likewise.
* corefile.c (memory_error): Likewise.
* infcmd.c (jump_command): Likewise.
* breakpoint.c (insert_bp_location, describe_other_breakpoints)
(mention, delete_breakpoint): Likewise.
* c-valprint.c (print_function_pointer_address, c_val_print): Likewise.
* dwarf2read.c (dump_die): Likewise.
* ada-valprint.c (ada_val_print_1): Likewise.
* f-valprint.c (f_val_print): Likewise.
* linux-fork.c (info_forks_command): Likewise.
* m32r-com.c (m32r_load_section, m32r_load)
(m32r_upload_command): Likewise.
* ui-out.c (ui_out_field_core_addr): Remove unnecessary comment.
2008-01-11 13:34:15 +00:00
9b254dd1ce
Updated copyright notices for most files.
2008-01-01 22:53:26 +00:00
91c066694a
2007-10-08 Pierre Muller <muller@ics.u-strasbg.fr>
...
* linux-fork.c: ARI fix: include "gdb_dirent.h" instead of <dirent.h>.
Makefile.in (linux-fork.o): Add gdb_dirent.h dependency.
2007-10-08 15:09:04 +00:00
3c61c145cc
2007-10-08 Pierre Muller <muller@ics.u-strasbg.fr>
...
* linux-fork.c: Move "gdb_wait.h" include back to the position of
<sys/wait.h> include before last commit.
2007-10-08 14:40:42 +00:00
cdf430071a
2007-10-08 Pierre Muller <muller@ics.u-strasbg.fr>
...
* linux-fork.c: ARI fix: include "gdb_wait.h" instead of <sys/wait.h>.
Makefile.in (linux-fork.o): Add gdb_wait.h dependency.
2007-10-08 07:43:43 +00:00
a9762ec78a
Switch the license of all .c files to GPLv3.
...
Switch the license of all .h files to GPLv3.
Switch the license of all .cc files to GPLv3.
2007-08-23 18:08:50 +00:00
594f77850b
* regcache.c (struct regcache): Add ptid_t member.
...
(regcache_xmalloc): Initialize it.
(regcache_cpy_no_passthrough): Do not refer to current_regcache.
(regcache_dup): Likewise.
(regcache_dup_no_passthrough): Likewise.
(current_regcache): Make static.
(registers_ptid): Remove variable.
(get_thread_regcache): New function.
(get_current_regcache): New function.
(registers_changed): Implement by freeing current regcache.
(regcache_raw_read): Do not refer to current_regcache. Set
inferior_ptid to regcache->ptid while calling target routines.
(regcache_raw_write): Likewise.
(regcache_raw_supply): Do not refer to current_regcache.
(read_pc_pid): Use thread regcache. Do not modify inferior_ptid.
(write_pc_pid): Likewise.
(build_regcache): Remove.
(_initialize_regcache): Do not call DEPRECATED_REGISTER_GDBARCH_SWAP
or deprecated_register_gdbarch_swap. Do not initialize
registers_ptid.
* regcache.h (get_current_regcache): Add prototype.
(get_thread_regcache): Likewise.
(current_regcache): Remove declaration.
* corelow.c (core_open): Replace current_regcache by
get_current_regcache ().
* frame.c (frame_pop): Likewise.
(put_frame_register): Likewise.
(get_current_frame, create_new_frame): Likewise.
* mi/mi-main.c (mi_cmd_data_write_register_values): Likewise.
* stack.c (return_command): Likewise.
* infcall.c (call_function_by_hand): Likewise.
* infrun.c (resume): Likewise.
(save_inferior_status, restore_inferior_status): Likewise.
* linux-fork.c (fork_load_infrun_state): Likewise.
(fork_save_infrun_state): Likewise.
* win32-nat.c (win32_resume): Likewise.
* i386fbsd-nat.c (i386fbsd_resume): Likewise.
* monitor.c (monitor_wait): Likewise.
* remote.c (remote_wait): Likewise.
* remote-mips.c (mips_wait): Likewise.
* bsd-kvm.c (bsd_kvm_open): Likewise
(bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd): Likewise.
* fbsd-nat.c (fbsd_make_corefile_notes): Likewise.
* i386-linux-nat.c (i386_linux_resume): Likewise.
* ia64-linux-nat.c (ia64_linux_insert_watchpoint): Likewise.
(ia64_linux_stopped_data_address): Likewise.
* frv-tdep.c (frv_fdpic_loadmap_addresses): Likewise.
* m32c-tdep.c (m32c_virtual_frame_pointer): Likewise.
* mep-tdep.c (current_me_module, current_options): Likewise.
* mips-tdep.c (deprecated_mips_set_processor_regs_hack): Likewise.
* linux-nat.c (linux_nat_do_thread_registers): Use thread
regcache instead of current_regcache. Call target_fetch_registers.
(linux_nat_corefile_thread_callback): Update call site.
(linux_nat_do_registers): Likewise.
* procfs.c (procfs_do_thread_registers): Use thread regcache instead
of current_regcache.
(procfs_make_note_section): Likewise.
* proc-service.c (ps_lgetregs, ps_lsetregs): Likewise.
(ps_lgetfpregs, ps_lsetfpregs): Likewise.
* sol-thread.c (ps_lgetregs, ps_lsetregs): Likewise.
(ps_lgetfpregs, ps_lsetfpregs): Likewise.
2007-06-16 17:16:26 +00:00
35f196d907
* frame.c (frame_pop, frame_observer_target_changed): Call
...
reinit_frame_cache.
(flush_cached_frames): Rename to reinit_frame_cache and delete
old implementation.
* frame.h (flush_cached_frames): Delete prototype and update comment.
* bsd-kvm.c (bsd_kvm_open, bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd): Call
reinit_frame_cache instead of flush_cached_frames. Do not call
select_frame after reinit_frame_cache.
* corelow.c (core_open): Likewise.
* gdbarch.sh (deprecated_current_gdbarch_select_hack): Likewise.
* infrun.c (prepare_to_proceed, context_switch)
(handle_inferior_event): Likewise.
* linux-fork.c (fork_load_infrun_state): Likewise.
* ocd.c (ocd_start_remote): Likewise.
* remote-e7000.c (e7000_start_remote): Likewise.
* remote-mips.c (device): Likewise.
* thread.c (switch_to_thread): Likewise.
* tracepoint.c (finish_tfind_command): Likewise.
* gdbarch.c: Regenerated.
2007-02-28 17:35:01 +00:00
6aba47ca06
Copyright updates for 2007.
2007-01-09 17:59:20 +00:00
f73adfeb8b
* gdbcmd.h (detachlist): Declare.
...
* infcmd.c (_initialize_infcmd): Define "detach" as prefix
command.
* linux-fork.c (_initialize_linux_fork): Rename
"detach-checkpoint" to "detach checkpoint" and "detach-fork" to
"detach fork".
* cli/cli-cmds.c (detachlist): Define.
(init_cmd_lists): Initialize it.
* cli/cli-cmds.h (detachlist): Declare.
doc/:
* gdb.texinfo (Processes): Rename "detach-fork" to "detach fork".
testsuite/:
* gdb.base/multi-forks.exp: Use "detach fork" instead of
"detach-fork".
2006-10-27 22:23:21 +00:00
b8db102de3
2006-04-26 Michael Snyder <msnyder@redhat.com>
...
* linux-fork.c (_initialize_linux_fork): Rename "delete-fork"
command to "delete fork" (no hyphen), compatible with other
"delete" commands.
(info_forks_command): Accept a fork ID argument, for info
on a single fork. Report if no matching forks.
2006-04-26 Michael Snyder <msnyder@redhat.com>
* gdb.base/multi-forks.exp: Modify patterns for "run to exit",
which may have to consume output from other forks.
Add tests to make sure that "delete fork" succeeded.
2006-04-27 Michael Snyder <msnyder@redhat.com>
* gdb.texinfo (delete-fork): Command renamed to "delete fork".
2006-04-27 23:03:42 +00:00
f973ed9c9f
* linux-nat.c (linux_ops_saved): New.
...
(super_mourn_inferior, kill_inferior, threaded, linux_nat_ops)
(child_mourn_inferior, child_wait, linux_nat_create_inferior)
(linux_nat_fetch_registers, linux_nat_store_registers)
(linux_nat_child_post_startup_inferior, init_linux_nat_ops): Delete.
(init_lwp_list): Don't set threaded.
(add_lwp): Don't modify threaded.
(delete_lwp): Don't mention non-threaded mode.
(linux_nat_switch_fork): New.
(linux_nat_attach): Update inferior_ptid.
(linux_nat_wait): Handle num_lwps == 0 at entry. Don't check
threaded flag.
(linux_nat_kill): Handle pending forks and saved forks.
(linux_nat_mourn_inferior): Handle saved forks.
(linux_nat_pid_to_str): Don't use the LWP form when there is
only one thread.
(linux_target): Don't set to_wait, to_kill, or to_mourn_inferior.
(linux_nat_add_target): New.
(_initialize_linux_nat): Don't initialize the linux native target
here.
* linux-nat.h (linux_nat_add_target, linux_nat_switch_fork): New
prototypes.
* linux-fork.c: Include "linux-nat.h".
(add_fork): Update initial PID.
(fork_load_infrun_state): Call linux_nat_switch_fork.
* Makefile.in (linux-fork.o): Update.
* alpha-linux-nat.c (_initialize_alpha_linux_nat): Use
linux_nat_add_target instead of add_target.
* amd64-linux-nat.c (_initialize_amd64_linux_nat): Likewise.
* arm-linux-nat.c (_initialize_arm_linux_nat): Likewise.
* hppa-linux-nat.c (_initialize_hppa_linux_nat): Likewise.
* ia64-linux-nat.c (_initialize_ia64_linux_nat): Likewise.
* i386-linux-nat.c (_initialize_i386_linux_nat): Likewise.
* m32r-linux-nat.c (_initialize_m32r_linux_nat): Likewise.
* m68klinux-nat.c (_initialize_m68k_linux_nat): Likewise.
* mips-linux-nat.c (_initialize_mips_linux_nat): Likewise.
* ppc-linux-nat.c (_initialize_ppc_linux_nat): Likewise.
* s390-nat.c (_initialize_s390_nat): Likewise.
* sparc-linux-nat.c (_initialize_sparc_linux_nat): Likewise.
* sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Likewise.
2006-03-24 23:08:16 +00:00
791b663bea
* linux-fork.c: Include "gdb_assert.h".
...
(fork_load_infrun_state): Set inferior_ptid and stop_pc here.
Update the register cache and selected frame also.
(linux_fork_mourn_inferior): Use fork_load_infrun_state. Return
to single fork mode if necessary.
(linux_fork_context): Remove bits handled by fork_load_infrun_state.
* Makefile.in (linux_fork_h): New.
(linux-fork.o, linux-nat.o): Update.
2006-03-24 22:44:05 +00:00
56aac7e845
2006-03-09 Michael Snyder <msnyder@redhat.com>
...
* linux-nat.c (kill_inferior): Just call target_mourn_inferior
instead of getting tricky for the multi-fork case.
* linux-fork.c (linux_fork_killall): Call PT_KILL and waitpid
for each fork, and then use init_fork_list to delete them.
2006-03-10 20:15:42 +00:00
1dce6535d8
* linux-fork.c (delete_fork_command, detach_fork_command): Use
...
PIDGET.
2006-01-15 19:07:17 +00:00
ac264b3b9c
2006-01-04 Michael Snyder <msnyder@redhat.com>
...
Checkpoint/Restart for Linux.
* linux-nat.c: Add support for debugging multiple forks.
Add #include for linux-fork.h (interface spec).
(super_mourn_inferior): New function pointer.
(child_mourn_inferior): New function / target method.
(linux_target): Claim to_mourn_inferior method pointer.
(child_follow_fork): Call interface to linux-fork, conditionally
add new fork processes to list of debugged processes.
(kill_inferior): Use interface to linux-fork to kill
multiple processes.
* linux-fork.h: New file.
* linux-fork.c: New file. Support for debugging multiple forks
of the same program. Support for checkpoint and restart commands.
* infrun.c (nullify_last_target_wait_ptid): New function.
* Makefile.in: Add linux-fork.
* config/*/linux.mh: Add linux-fork.
* NEWS: Mention new functionality.
2006-01-04 19:34:58 +00:00
Pedro Alves
Vladimir Prus
Markus Deuling
Daniel Jacobowitz
Pierre Muller
Joel Brobecker
Ulrich Weigand
Andreas Schwab
Michael Snyder