b3adc24a07
Update year range in copyright notice of binutils files
2020-01-01 18:42:54 +10:30
38c3873e5d
Speed up locview resolution with relaxable frags
...
Targets such as xtensa incur a much higher overhead to resolve
location view numbers than e.g. x86, because the expressions used to
compute view numbers cannot be resolved soon enough.
Each view number is computed by incrementing the previous view, if
they are both at the same address, or by resetting it to zero
otherwise. If PV is the previous view number, PL is its location, and
NL is the location of the next view, its number is computed by
evaluating NV = !(NL > PL) * (PV + 1).
set_or_check_view uses resolve_expression to decide whether portions
of this expression can be simplified to constants. The (NL > PL)
subexpression is one that can often be resolved to a constant,
breaking chains of view number computations at instructions of nonzero
length, but not after alignment that might be unnecessary.
Alas, when nearly every frag ends with a relaxable instruction,
frag_offset_fixed_p will correctly fail to determine a known offset
between two unresolved addresses in neighboring frags, so the
unresolved symbolic operation will be constructed and used in the
computation of most view numbers. This results in very deep
expressions.
As view numbers get referenced in location view lists, each operand in
the list goes through symbol_clone_if_forward_ref, which recurses on
every subexpression. If each view number were to be referenced, this
would exhibit O(n^2) behavior, where n is the depth of the view number
expressions, i.e., the length of view number sequences without an
early resolution that cuts the expression short.
This patch enables address compares used by view numbering to be
resolved even when exact offsets are not known, using new logic to
determine when the location either remained the same or changed for
sure, even with the possibility of relaxation. This enables most view
number expressions to be resolved with a small, reasonable depth.
PR gas/24444
* frags.c (frag_gtoffset_p): New.
* frags.h (frag_gtoffset_p): Declare it.
* expr.c (resolve_expression): Use it.
2019-04-25 08:35:13 +09:30
871a6bd2d8
Make frag fr_fix unsigned
...
The field only stores unsigned values, so let's make it unsigned to
stop people worrying about the possibility of negative values.
* frags.h (struct frag <fr_fix>): Use unsigned type.
* frags.c (frag_new): Assert that current size exceeds
old_frags_var_max_size.
* ehopt.c (get_cie_info): Adjust for unsigned fr_fix.
* listing.c (calc_hex): Likewise.
* write.c (cvt_frag_to_fill, write_relocs): Likewise.
* config/tc-arc.c (md_convert_frag): Likewise.
* config/tc-avr.c (avr_patch_gccisr_frag): Likewise.
* config/tc-mips.c (md_convert_frag): Likewise.
* config/tc-rl78.c (md_convert_frag): Likewise.
* config/tc-rx.c (md_convert_frag): Likewise.
* config/tc-sparc.c (md_apply_fix): Likewise.
* config/tc-xtensa.c (next_instrs_are_b_retw): Likewise.
(unrelaxed_frag_min_insn_count, unrelaxed_frag_has_b_j): Likewise.
2019-04-16 17:12:09 +09:30
827041555a
Update year range in copyright notice of binutils files
2019-01-01 22:06:53 +10:30
219d1afa89
Update year range in copyright notice of binutils files
2018-01-03 17:49:56 +10:30
2571583aed
Update year range in copyright notice of all files.
2017-01-02 14:08:56 +10:30
3b4dbbbf59
Add more const type qualifiers to GAS sources.
...
* output-file.c (output_file_create): Make file name argument const.
(output_file_close): Likewise.
* output-file.h (output_file_create): Adjust.
(output_file_close): Likewise.
* depend.c (quote_string_for_make): Make src argument const char *.
(register_dependency): Likewise.
(wrap_output): Likewise.
* as.h (register_dependency): Adjust.
* config/tc-xtensa.c (finish_vinsn): Remove unnecessary calls to
as_where ();
* symbols.c (S_SET_EXTERNAL): Likewise.
* input-scrub.c (as_where): Return the file name.
* as.h (as_where): Adjust prototype.
* app.c (do_scrub_chars): Adjust.
* cond.c (s_elseif): Likewise.
(s_else): Likewise.
(initialize_cframe): Likewise.
* config/obj-coff.c (obj_coff_init_stab_section): Likewise.
* config/obj-elf.c (obj_elf_init_stab_section): Likewise.
* config/obj-som.c (obj_som_init_stab_section): Likewise.
* config/tc-aarch64.c (output_info): Likewise.
* config/tc-ia64.c (md_assemble): Likewise.
(dot_alias): Likewise.
* config/tc-m68k.c (m68k_frob_label): Likewise.
* config/tc-mmix.c (s_bspec): Likewise.
(mmix_handle_mmixal): Likewise.
* config/tc-rx.c (rx_include): Likewise.
* config/tc-tic54x.c (tic54x_set_default_include): Likewise.
(tic54x_adjust_symtab): Likewise.
* config/tc-xtensa.c (directive_push): Likewise.
(xtensa_sanity_check): Likewise.
(xtensa_relax_frag): Likewise.
(md_convert_frag): Likewise.
(tinsn_to_slotbuf): Likewise.
* dwarf2dbg.c (dwarf2_where): Likewise.
* ecoff.c (add_file): Likewise.
(ecoff_generate_asm_lineno): Likewise.
* expr.c (make_expr_symbol): Likewise.
* frags.c (frag_new): Likewise.
(frag_var_init): Likewise.
* listing.c (listing_newline): Likewise.
* messages.c (identify): Likewise.
(as_show_where): Likewise.
(as_warn_internal): Likewise.
(as_bad_internal): Likewise.
* read.c (s_irp): Likewise.
(s_macro): Likewise.
(s_reloc): Likewise.
* stabs.c (stabs_generate_asm_file): Likewise.
(stabs_generate_asm_lineno): Likewise.
(stabs_generate_asm_func): Likewise.
* write.c (fix_new_internal): Likewise.
* as.h (PRINTF_WHERE_LIKE): Make file name argument const.
(as_warn_value_out_of_range): Adjust prototype.
(as_bad_value_out_of_range): Adjust prototype.
* messages.c (identify): Make file name argument const char *.
(as_warn_internal): Likewise.
(as_warn_where): Likewise.
(as_bad_internal): Likewise.
(as_bad_where): Likewise.
(as_internal_value_out_of_range): Likewise.
(as_warn_value_out_of_range): Likewise.
(as_bad_value_out_of_range): Likewise.
* as.h (found_comment_file): Change type to const char *.
* cond.c (file_line::file): Likewise.
* config/obj-coff.c (obj_coff_init_stab_section): Make variable const.
* config/obj-elf.c (obj_elf_init_stab_section): Likewise.
* config/obj-som.c (obj_som_init_stab_section): Likewise.
* config/tc-aarch64.c (output_info): Likewise.
* config/tc-alpha.c (insert_operand): Likewise.
* config/tc-arc.c (insert_operand): Likewise.
* config/tc-d30v.c (check_size): Likewise.
* config/tc-ia64.c (struct alias): Likewise.
* config/tc-m68k.c (struct label_line): Likewise.
* config/tc-mcore.c (md_apply_fix): Likewise.
* config/tc-microblaze.c (md_estimate_size_before_relax): Likewise.
* config/tc-mips.c (mips16_immed): Likewise.
* config/tc-mmix.c (mmix_handle_mmixal): Likewise.
* config/tc-ppc.c (ppc_insert_operand): Likewise.
* config/tc-rx.c (rx_include): Likewise.
* config/tc-s390.c (s390_insert_operand): Likewise.
* config/tc-tic54x.c (tic54x_set_default_include): Likewise.
(tic54x_adjust_symtab): Likewise.
* config/tc-tilegx.c (insert_operand): Likewise.
(apply_special_operator): Likewise.
* config/tc-tilepro.c (insert_operand): Likewise.
* config/tc-xtensa.c (directive_push): Likewise.
* ecoff.c (add_file): Likewise.
(ecoff_generate_asm_lineno): Likewise.
* listing.c (listing_newline): Likewise.
* read.c (s_irp): Likewise.
* write.c (install_reloc): Likewise.
* write.h (struct fix): Likewise.
* input-file.c (file_name): Change type to const char *.
(saved_file::file_name): Likewise.
(input_file_open): Change type of argument to const char *.
* input-file.h (input_file_open): Adjust.
* input-scrub.c (logical_input_file): change type to const char *.
(physical_input_file): Likewise.
(struct input_save): Adjust.
(input_scrub_push): Adjust.
(input_scrub_begin): Adjust.
(as_where): Adjust.
* input-scrub.c (input_scrub_new_file): Make file name argument const.
(input_scrub_include_file): Likewise.
(new_logical_line_flags): Likewise.
(new_logical_line): Likewise.
* as.h: Adjust.
* frags.h (struct frag): Change type of fr_file to const char *.
* expr.c (expr_symbol_where): Change type of file argument to
const char **.
* expr.h (expr_symbol_where): Likewise.
* config/tc-i370.c (md_apply_fix): adjust.
* config/tc-mmix.c (mmix_md_end): Likewise.
* config/tc-ppc.c (md_apply_fix): Likewise.
* config/tc-s390.c (md_apply_fix): Likewise.
* symbols.c (report_op_error): Likewise.
(resolve_symbol_value): Likewise.
* config/tc-ia64.c (slot::src_file): Change type to const char *.
(rsrc::file): Likewise.
* config/tc-xtensa.c (xtensa_sanity_check): Change type of variable to
const char *.
(xtensa_relax_frag): Likewise.
(md_convert_frag): Likewise.
(tinsn_to_slotbuf): Likewise.
* expr.c (expr_symbol_line): Likewise.
* macro.c (define_macro): Likewise.
* macro.h (macro_struct): Likewise.
* messages.c (as_show_where): Likewise.
* read.c (s_macro): Likewise.
* stabs.c (stabs_generate_asm_file): Likewise.
(generate_asm_file): Likewise.
(stabs_generate_asm_lineno): Likewise.
* write.h (struct reloc_list): Likewise.
* input-scrub.c (as_where): Change return type to const char *.
* as.h (as_wheree): Adjust.
2016-02-22 14:11:27 +00:00
6f2750feaf
Copyright update for binutils
2016-01-01 23:00:01 +10:30
b90efa5b79
ChangeLog rotatation and copyright year update
2015-01-02 00:53:45 +10:30
e57e6ddc2e
Prepare gas for 64-bit obstacks
...
Use size_t in a few places involved with obstacks, and don't include
obstack.h in files that don't use obstacks.
gas/
* config/bfin-parse.y: Don't include obstack.h.
* config/obj-aout.c: Likewise.
* config/obj-coff.c: Likewise.
* config/obj-som.c: Likewise.
* config/tc-bfin.c: Likewise.
* config/tc-i960.c: Likewise.
* config/tc-rl78.c: Likewise.
* config/tc-rx.c: Likewise.
* config/tc-tic4x.c: Likewise.
* expr.c: Likewise.
* listing.c: Likewise.
* config/obj-elf.c (elf_file_symbol): Make name_length a size_t.
* config/tc-aarch64.c (symbol_locate): Likewise.
* config/tc-arm.c (symbol_locate): Likewise.
* config/tc-mmix.c (mmix_handle_mmixal): Make len_0 a size_t.
* config/tc-score.c (s3_build_score_ops_hsh): Make len a size_t.
(s3_build_dependency_insn_hsh): Likewise.
* config/tc-score7.c (s7_build_score_ops_hsh): Likewise.
(s7_build_dependency_insn_hsh): Likewise.
* frags.c (frag_grow): Make parameter a size_t, and use size_t locals.
(frag_new): Make parameter a size_t.
(frag_var_init): Make max_chars and var parameters size_t.
(frag_var, frag_variant): Likewise.
(frag_room): Return a size_t.
(frag_align_pattern): Make n_fill parameter a size_t.
* frags.h: Update function prototypes.
* symbols.c (save_symbol_name): Make name_length a size_t.
2014-07-26 21:00:50 +09:30
a82c7d9030
Add support to the Xtensa target for creating trampolines for out-of-range branches.
...
* tc-xtensa.c (xtensa_check_frag_count, xtensa_create_trampoline_frag)
(xtensa_maybe_create_trampoline_frag, init_trampoline_frag)
(find_trampoline_seg, search_trampolines, get_best_trampoline)
(check_and_update_trampolines, add_jump_to_trampoline)
(dump_trampolines): New function.
(md_parse_option): Add cases for --[no-]trampolines options.
(md_assemble, finish_vinsn, xtensa_end): Add call to
xtensa_check_frag_count.
(xg_assemble_vliw_tokens): Add call to
xtensa_maybe_create_trampoline_frag.
(xtensa_relax_frag): Relax fragments with RELAX_TRAMPOLINE state.
(relax_frag_immed): Relax jump instructions that cannot reach its
target.
* tc-xtensa.h (xtensa_relax_statesE::RELAX_TRAMPOLINE): New relax
state.
* as.texinfo: Document --[no-]trampolines command-line options.
* c-xtensa.texi: Document trampolines relaxation and command line
options.
* frags.c (get_frag_count, clear_frag_count): New function.
(frag_alloc): Increment totalfrags counter.
* frags.h (get_frag_count, clear_frag_count): New function.
* all.exp: Add test for trampoline relaxation.
* trampoline.d: Trampoline relaxation expected dump.
* trampoline.s: Trampoline relaxation test source.
2014-03-21 11:53:42 +00:00
4b95cf5c0c
Update copyright years
2014-03-05 22:16:15 +10:30
08ea70204d
* frags.h (frag_offset_fixed_p): Update prototype.
...
* frags.c (frag_offset_fixed_p): Change type of "offset" to offsetT.
* expr.c (expr, resolve_expression): Likewise for frag_off var.
2012-06-30 00:27:31 +00:00
cdaa5616cb
2012-02-21 Tristan Gingold <gingold@adacore.com>
...
* config/tc-i386.h (OBJ_MACH_O): New section.
(TC_FORCE_RELOCATION): Use obj_mach_o_force_reloc.
(TC_FORCE_RELOCATION_SUB_SAME): New
(TC_FORCE_RELOCATION_SUB_LOCAL): New.
(TC_VALIDATE_FIX_SUB): New.
* frags.h (struct frag): OBJ_FRAG_TYPE, new field.
* symbols.c (colon): obj_frob_colon: New hook.
* write.c (write_object_file): md_pre_relax_hook, new
hook.
* config/obj-macho.c (obj_mach_o_frob_colon): New.
(obj_mach_o_frob_label): Record sub-section labels.
(obj_mach_o_frob_symbol): Rename from obj_macho_frob_symbol.
(obj_mach_o_set_subsections): New.
(obj_mach_o_pre_relax_hook): New.
(obj_mach_o_in_different_subsection): New.
(obj_mach_o_force_reloc_sub_same): New.
(obj_mach_o_force_reloc_sub_local): New.
(obj_mach_o_force_reloc): New.
* config/obj-macho.h (OBJ_SYMFIELD_TYPE): New.
(obj_frob_colon): New Define.
(obj_mach_o_frob_label): Renamed.
(obj_mach_o_frob_symbol): Renamed.
(OBJ_FRAG_TYPE): New.
(obj_mach_o_in_different_subsection, obj_mach_o_force_reloc,
obj_mach_o_force_reloc_sub_same,
obj_mach_o_force_reloc_sub_local): New declarations.
2012-02-21 09:13:02 +00:00
6885131b49
* as.c (main): Define .gasversion. rather than __GAS_VERSION__.
...
* frags.h (bss_address_frag): Delete
(predefined_address_frag): New.
* frags.c (frag_init): Init predefined_address_frag. Delete ref
to bss_addres_frag.
* symbols.c (S_CAN_BE_REDEFINED): New function.
* symbols.h (S_CAN_BE_REDEFINED): Declare.
* read.c (assign_symbol): Use S_CAN_BE_REDEFINED.
2011-10-12 21:07:07 +00:00
e35a414d3c
PR gas/12049
...
* frags.h (struct frag): Add "region" field.
* write.c (relax_frag): Don't add "stretch" to forward reference
target if there is an intervening org or align.
(relax_segment): Set region.
2010-10-19 12:00:33 +00:00
ec2655a6a7
Switch to GPLv3
2007-07-03 11:01:12 +00:00
6cbe03fb0f
* frags.c (frag_offset_fixed_p): Constify args.
...
* frags.h (frag_offset_fixed_p): Ditto.
2006-04-18 09:58:26 +00:00
9963077898
PR 997
...
* frags.c (frag_offset_fixed_p): New function.
* frags.h (frag_offset_fixed_p): Declare.
* expr.c (expr): Use frag_offset_fixed_p when simplifying subtraction.
(resolve_expression): Likewise.
2006-04-04 08:04:57 +00:00
b4f261e094
* frags.h: Remove ANSI_PROTOTYPES conditional code.
...
* config/obj-elf.h: Likewise.
* config/tc-h8300.h: Likewise.
* config/tc-h8500.h: Likewise.
* config/tc-i370.h: Likewise.
* config/tc-i386.h: Likewise.
* config/tc-m68hc11.h: Likewise.
* config/tc-m68k.h: Likewise.
* config/tc-ppc.h: Likewise.
* config/tc-s390.h: Likewise.
* config/tc-sh.h: Likewise.
* config/tc-sparc.h: Likewise.
* config/tc-tic30.c: Likewise.
* config/tc-w65.h: Likewise.
* config/tc-xtensa.h: Likewise.
2005-07-08 05:57:21 +00:00
4b4da1607a
Update the address and phone number of the FSF
2005-05-05 09:13:19 +00:00
2da5c03714
update copyright dates
2005-03-03 01:29:54 +00:00
59c871b457
* as.h: Remove #if 0'd code.
...
* atof-generic.c (atof_generic): Likewise.
* ecoff.c (ecoff_directive_frame): Likewise.
* frags.h (FRAG_APPEND_1_CHAR): Likewise.
* itbl-ops.c (itbl_add_reg): Likewise.
* listing.c (calc_hex): Likewise.
* read.c (MASK_CHAR): Likewise.
* subsegs.c (subsegs_print_statistics): Likewise.
* symbols.c (indent): Likewise.
* write.c (write_relocs): Likewise.
(write_object_file): Likewise.
(relax_frag): Likewise.
2005-01-21 05:54:38 +00:00
09b935accc
* frags.h (struct frag): Add has_code and insn_addr fields.
...
* write.c (cvt_frag_to_fill): Invoke md_frag_check.
* config/tc-ppc.c (md_assemble): Check and set insn_addr.
* config/tc-ppc.h (md_frag_check): Define.
2004-07-02 06:40:19 +00:00
0530d30a58
* frags.h (frag_room): Declare.
...
* frags.c (frag_room): New function.
* doc/internals.texi: Document it.
2004-01-23 12:52:20 +00:00
dd625418be
* ehopt.c: Convert to ISO-C.
...
* emul.h: Likewise.
* expr.c: Likewise.
* expr.h: Likewise.
* flonum-copy.c: Likewise.
* flonum-mult.c: Likewise.
* flonum.h: Likewise.
* frags.c: Likewise.
* frags.h: Likewise.
2003-11-22 16:03:03 +00:00
47eebc207f
* ChangeLog: Fix typos.
...
* ChangeLog-9295: Likewise.
* as.c: Fix comment typos.
* as.h: Likewise.
* atof-generic.c: Likewise.
* bit_fix.h: Likewise.
* frags.h: Likewise.
* hash.c: Likewise.
* input-file.c: Likewise.
* input-scrub.c: Likewise.
* itbl-ops.c: Likewise.
* itbl-parse.y: Likewise.
* listing.c: Likewise.
* macro.h: Likewise.
* read.c: Likewise.
* sb.c: Likewise.
* sb.h: Likewise.
* symbols.c: Likewise.
* symbols.h: Likewise.
2003-10-27 12:45:17 +00:00
d1a6c2428d
* as.h: Fix formatting.
...
* cgen.c: Likewise.
* cgen.h: Likewise.
* dwarf2dbg.c: Likewise.
* frags.h: Likewise.
* gasp.c: Likewise.
* macro.c: Likewise.
* read.c: Likewise.
* stabs.c: Likewise.
* symbols.c: Likewise.
2002-05-03 02:25:33 +00:00
e46d99eb07
Multi-pass relaxation machinery.
2001-03-30 02:19:36 +00:00
38686296b3
Use `relax_marker' instead of fragile address test code to determine
...
whether a frag's fr_address has been updated.
2001-03-20 03:12:01 +00:00
f7e42eb4af
Fix copyright notices
2001-03-08 23:24:26 +00:00
0a9ef43907
* as.h (rs_align_test): New.
...
* frags.c (NOP_OPCODE): Move default from read.c.
(MAX_MEM_FOR_RS_ALIGN_CODE): New default.
(frag_align_code): New.
* frags.h (frag_align_code): Declare.
* read.c (NOP_OPCODE): Remove.
(do_align): Use frag_align_code.
* write.c (NOP_OPCODE): Remove.
(get_recorded_alignment): New.
(cvt_frag_to_fill): Handle rs_align_test.
(relax_segment): Likewise.
(subsegs_finish): Align last subseg in section to the
section alignment. Use frag_align_code.
* write.h (get_recorded_alignment): Declare.
* config/obj-coff.c (size_section): Handle rs_align_test.
(fill_section, fixup_mdeps): Likewise.
(write_object_file): Use frag_align_code.
* config/tc-alpha.c (alpha_align): Use frag_align_code.
(alpha_handle_align): New.
* config/tc-alpha.h (HANDLE_ALIGN): New.
(MAX_MEM_FOR_RS_ALIGN_CODE): New.
* config/tc-i386.h (md_do_align): Use frag_align_code.
(MAX_MEM_FOR_RS_ALIGN_CODE): New.
* config/tc-ia64.c (ia64_md_do_align): Don't do code alignment.
(ia64_handle_align): New.
* config/tc-ia64.h (HANDLE_ALIGN): New.
(MAX_MEM_FOR_RS_ALIGN_CODE): New.
* config/tc-m32r.c (m32r_do_align): Remove.
(m32r_handle_align): New.
(fill_insn): Use frag_align_code.
* config/tc-m32r.h (md_do_align): Remove.
(HANDLE_ALIGN, MAX_MEM_FOR_RS_ALIGN_CODE): New.
* config/tc-m88k.c, config/tc-m88k.h: Similarly.
* config/tc-mips.c, config/tc-mips.h: Similarly.
* config/tc-sh.c (sh_cons_align): Use rs_align_test.
(sh_handle_align): Likewise. Handle rs_align_code.
(sh_do_align): Remove.
* config/tc-sh.h (md_do_align): Remove.
(MAX_MEM_FOR_RS_ALIGN_CODE): New.
* config/tc-sparc.c (sparc_cons_align): Use rs_align_test.
(sparc_handle_align): Likewise. Handle rs_align_code.
* config/tc-sparc.h (md_do_align): Remove.
(MAX_MEM_FOR_RS_ALIGN_CODE): New.
2000-12-28 10:07:56 +00:00
e6c774b42a
2000-10-17 Kazu Hirata <kazu@hxi.com>
...
* debug.c: Fix formatting.
* depend.c: Likewise.
* dwarf2dbg.c: Likewise.
* dwarf2dbg.h: Likewise.
* ecoff.c: Likewise.
* expr.c: Likewise.
* expr.h: Likewise.
* flonum-konst.c: Likewise.
* frags.h: Likewise.
2000-10-17 20:21:45 +00:00
a01b9fa4ba
2000-09-12 Kazu Hirata <kazu@hxi.com>
...
* as.h: Fix formatting.
* asintl.h: Likewise.
* bit_fix.h: Likewise.
* dwarf2dbg.h: Likewise.
* expr.h: Likewise.
* flonum.h: Likewise.
* frags.h: Likewise.
* itbl-ops.h: Likewise.
* macro.h: Likewise.
* read.h: Likewise.
* sb.h: Likewise.
* struc-symbol.h: Likewise.
* subsegs.h: Likewise.
* symbols.h: Likewise.
* tc.h: Likewise.
* write.h: Likewise.
2000-09-12 20:57:14 +00:00
5a327c7ac2
Missed copyright update in last patch.
2000-05-23 05:07:47 +00:00
ee7fcc42b1
Pass jump reloc in fr_var so it can be used in
...
md_estimate_size_before_relax, replacing old kludge.
2000-05-23 04:48:21 +00:00
bea9907b2a
octets vs bytes changes for GAS
2000-02-03 18:20:23 +00:00
49309057b4
Add support for storing local symbols in a small structure to save
...
memory when assembling large files.
* as.h: Don't include struc-symbol.h.
(symbolS): Add typedef.
* symbols.c: Include struc-symbol.h.
(local_hash): New static variable.
(save_symbol_name): New static function, from symbol_create.
(symbol_create): Call save_symbol_name.
(local_symbol_count): New static variable.
(local_symbol_conversion_count): Likewise.
(LOCAL_SYMBOL_CHECK): Define.
(local_symbol_make): New static function.
(local_symbol_convert): New static function.
(colon): Handle local symbols. Create local symbol for local
label name.
(symbol_table_insert): Handle local symbols.
(symbol_find_or_make): Create local symbol for local label name.
(symbol_find_base): Check for local symbol.
(symbol_append, symbol_insert): Check for local symbols.
(symbol_clear_list_pointers, symbol_remove): Likewise.
(verify_symbol_chain): Likewise.
(copy_symbol_attributes): Likewise.
(resolve_symbol_value): Handle local symbols.
(resolve_local_symbol): New static function.
(resolve_local_symbol_values): New function.
(S_GET_VALUE, S_SET_VALUE): Handle local symbols.
(S_IS_FUNCTION, S_IS_EXTERNAL, S_IS_WEAK, S_IS_COMMON): Likewise.
(S_IS_DEFINED, S_IS_DEBUG, S_IS_LOCAL, S_GET_NAME): Likewise.
(S_GET_SEGMENT, S_SET_SEGMENT, S_SET_EXTERNAL): Likewise.
(S_CLEAR_EXTERNAL, S_SET_WEAK, S_SET_NAME): Likewise.
(symbol_previous, symbol_next): New functions.
(symbol_get_value_expression): Likewise.
(symbol_set_value_expression): Likewise.
(symbol_set_frag, symbol_get_frag): Likewise.
(symbol_mark_used, symbol_clear_used, symbol_used_p): Likewise.
(symbol_mark_used_in_reloc): Likewise.
(symbol_clear_used_in_reloc, symbol_used_in_reloc_p): Likewise.
(symbol_mark_mri_common, symbol_clear_mri_common): Likewise.
(symbol_mri_common_p): Likewise.
(symbol_mark_written, symbol_clear_written): Likewise.
(symbol_written_p): Likewise.
(symbol_mark_resolved, symbol_resolved_p): Likewise.
(symbol_section_p, symbol_equated_p): Likewise.
(symbol_constant_p): Likewise.
(symbol_get_bfdsym, symbol_set_bfdsym): Likewise.
(symbol_get_obj, symbol_set_obj): Likewise.
(symbol_get_tc, symbol_set_tc): Likewise.
(symbol_begin): Initialize local_hash.
(print_symbol_value_1): Handle local symbols.
(symbol_print_statistics): Print local symbol statistics.
* symbols.h: Include "struc-symbol.h" if not BFD_ASSEMBLER.
Declare new symbols.c functions. Move many declarations here from
struc-symbol.h.
(SYMBOLS_NEED_BACKPOINTERS): Define if needed.
* struc-symbol.h (SYMBOLS_NEED_BACKPOINTERS): Don't set.
(struct symbol): Move bsym to make it clearly the first field.
Remove TARGET_SYMBOL_FIELDS.
(symbolS): Don't typedef.
(struct broken_word): Remove.
(N_TYPE_seg, seg_N_TYPE): Move to symbol.h.
(SEGMENT_TO_SYMBOL_TYPE, N_REGISTER): Likewise.
(symbol_clear_list_pointers): Likewise.
(symbol_insert, symbol_remove): Likewise.
(symbol_previous, symbol_append): Likewise.
(verify_symbol_chain, verify_symbol_chain_2): Likewise.
(struct local_symbol): Define.
(local_symbol_converted_p, local_symbol_mark_converted): Define.
(local_symbol_resolved_p, local_symbol_mark_resolved): Define.
(local_symbol_get_frag, local_symbol_set_frag): Define.
(local_symbol_get_real_symbol): Define.
(local_symbol_set_real_symbol): Define.
Define.
* write.c (write_object_file): Call resolve_local_symbol_values.
* config/obj-ecoff.h (OBJ_SYMFIELD_TYPE): Define.
(TARGET_SYMBOL_FIELDS): Don't define.
* config/obj-elf.h (OBJ_SYMFIELD_TYPE): Add local field. If
ECOFF_DEBUGGING, add ECOFF fields.
(ELF_TARGET_SYMBOL_FIELDS, TARGET_SYMBOL_FIELDS): Don't define.
* config/obj-multi.h (struct elf_obj_sy): Add local field. If
ECOFF_DEBUGGING, add ECOFF fields.
(ELF_TARGET_SYMBOL_FIELDS, TARGET_SYMBOL_FIELDS): Don't define.
(ECOFF_DEBUG_TARGET_SYMBOL_FIELDS): Don't define.
* config/tc-mcore.h: Don't include struc-symbol.h.
(TARGET_SYMBOL_FIELDS): Don't define.
(struct mcore_tc_sy): Define.
(TC_SYMFIELD_TYPE): Define.
* Many files: Use symbolS instead of struct symbol. Use new
accessor functions rather than referring to symbolS fields
directly.
* read.c (s_mri_common): Don't add in value of line_label.
* config/tc-mips.c (md_apply_fix): Correct parenthesization when
checking for SEC_LINK_ONCE.
* config/tc-sh.h (sh_fix_adjustable): Declare.
1999-06-03 00:29:48 +00:00
252b5132c7
19990502 sourceware import
1999-05-03 07:29:11 +00:00
Alan Modra
Alexandre Oliva
Trevor Saunders
David Weatherford
Iain Sandoe
Nick Clifton
Ben Elliston
Richard Sandiford
Kazu Hirata
Richard Henderson
Timothy Wall
Ian Lance Taylor