bfd/
2016-04-05 Cupertino Miranda <cmiranda@synopsys.com>
* elf32-arc.c (name_for_global_symbol): Added assert to check for
symbol index.
(elf_arc_relocate_section): Added and changed asserts, validating
the synamic symbol index.
(elf_arc_finish_dynamic_symbol): Do not fill the dynamic
relocation if symbol has dynindx set to -1.
Always turn hidden and internal symbols which have a dynamic index into
local ones. This is required by the the ELF gABI[1]:
"A hidden symbol contained in a relocatable object must be either
removed or converted to STB_LOCAL binding by the link-editor when the
relocatable object is included in an executable file or shared object."
"An internal symbol contained in a relocatable object must be either
removed or converted to STB_LOCAL binding by the link-editor when the
relocatable object is included in an executable file or shared object."
The ELF linker usually respects this requirement, however in the case
where a dynamic symbol has been preallocated due to a reference of the
default export class aka visibility from the object being linked, and
then merged with a hidden or internal symbol definition from within the
same object, then the original export class is carried over to the
output dynamic symbol table, because while merging the generic ELF
linker only converts affected dynamic symbols to local when they are
defined or referenced by the object being linked and a dynamic object
involved in the link both at a time.
The dynamic symbol produced confuses then the dynamic loader at the run
time -- the hidden or internal export class is ignored and the symbol
follows preemption rules as with the default export class.
In the MIPS target it happens when `mips_elf_record_global_got_symbol'
creates a dynamic symbol when a call relocation is encountered.
Additionally if the undefined symbol referred by such a relocation does
specify the intended export class, then a local dynamic symbol is
created instead, which is harmless and allowed, but useless. Normally
no local dynamic symbols are created, except for a single dummy one at
the beginning.
Correct the problem by removing the extra check for a dynamic symbol
being defined or referenced by the object being linked and a dynamic
object involved in the link both at a time. The test cases included
cover the internal and hidden symbol cases, as well as a protected
symbol for a reference, the handling of which is unchanged by this fix.
Both cases described above are covered, that is where an internal or
hidden dynamic symbol is produced and where a local one is.
NB this change affects CRIS results where some symbols in the static
table produced in a final link are now converted from STV_HIDDEN to
STB_LOCAL. This happens whenever the `elf_backend_hide_symbol' handler
is called, so the affected symbols must have been chosen for entering
into the dynamic symbol table, except in these test cases no such symbol
table is produced. In fully linked binaries the static symbol table is
only used for debugging though, so such a change is fine.
References:
[1] "System V Application Binary Interface - DRAFT - 24 April 2001",
The Santa Cruz Operation, Inc., "Symbol Table",
<http://www.sco.com/developers/gabi/2001-04-24/ch4.symtab.html>
bfd/
PR ld/19908
* elflink.c (elf_link_add_object_symbols): Always turn hidden
and internal symbols which have a dynamic index into local
ones.
ld/
PR ld/19908
* testsuite/ld-cris/tls-e-20.d: Adjust for hidden symbol
handling fix.
* testsuite/ld-cris/tls-e-20a.d: Likewise.
* testsuite/ld-cris/tls-e-21.d: Likewise.
* testsuite/ld-cris/tls-e-23.d: Likewise.
* testsuite/ld-cris/tls-e-80.d: Likewise.
* testsuite/ld-cris/tls-gd-3h.d: Likewise.
* testsuite/ld-cris/tls-leie-19.d: Likewise.
* testsuite/ld-mips-elf/export-class-ref-lib.sd: New test.
* testsuite/ld-mips-elf/export-hidden-ref.sd: New test.
* testsuite/ld-mips-elf/export-internal-ref.sd: New test.
* testsuite/ld-mips-elf/export-protected-ref.sd: New test.
* testsuite/ld-mips-elf/export-class-ref-f0.s: New test source.
* testsuite/ld-mips-elf/export-class-ref-f1.s: New test source.
* testsuite/ld-mips-elf/export-class-ref-f2.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
PR 19872
bfd * dwarf2.c (parse_comp_unit): Skip warning about unrecognised
version number if the version is zero.
bin * dwarf.c (display_debug_aranges): Skip warning about unrecognised
version number if the version is zero.
This isn't perfect in checking whether libraries will be loaded since
elf_link_add_object_symbols doesn't recurse down DT_NEEDED links.
(That happens later in ld/emultempl/elf32.em after_open.) So in
effect this recursive check really only looks one level down the
DT_NEEDED tree. Which is enough for the most common case, and
libc.so/ld.so in particular.
PR 19886
* elflink.c (on_needed_list): Recursively check needed status.
(elf_link_add_object_symbols): Adjust.
PR 17334
* elf32-bfin.c (elf32_bfinfdpic_finish_dynamic_sections): Relax
assertion on the size of the got section to allow it to be bigger
than the number of relocs.
bfd * warning.m4 (GCC_WARN_CFLAGS): Only add -Wstack-usage if using a
sufficiently recent version of GCC.
* configure: Regenerate.
others * configure: Regenerate.
This commit introduces the nps400 machine type as a variant of arc.
There's a new flag in the assembler to select this machine type. All
other changes are just adding handling of the new machine type into the
relevant places.
The nps400 is an arc700 variant with some vendor specific instructions
added into the instruction set. This commit does not add any of the new
instructions, this is just laying the groundwork for future commits.
However, in preparation for these new instructions a new opcode define for
nps400 has been added to include/opcode/arc.h, this new opcode define is
used in the assembler and disassembler along with the existing define
for arc700 such that when assembling and disassembling for nps400 the
user will have access to all arc700 instructions and all the nps400
vendor extension instructions.
bfd/ChangeLog:
* archures.c (bfd_mach_arc_nps400): Define.
* bfd-in2.h: Regenerate.
* cpu-arc.c (arch_info_struct): New entry for nps400, renumber
some existing entries to make space.
* elf32-arc.c (arc_elf_object_p): Add nps400 case.
(arc_elf_final_write_processing): Likewise.
binutils/ChangeLog:
* readelf.c (decode_ARC_machine_flags): Handle nps400.
gas/ChangeLog:
* config/tc-arc.c (cpu_types): Add nps400 entry.
(check_zol): Handle nps400.
include/ChangeLog:
* elf/arc.h (E_ARC_MACH_NPS400): Define.
* opcode/arc.h (ARC_OPCODE_NPS400): Define.
opcodes/ChangeLog:
* arc-dis.c (print_insn_arc): Handle nps400.
The constant EF_ARC_CPU_GENERIC is defined in the include/elf/arc.h
file, and is used in a few places in binutils, however, this constant
should never make it into the elf header flags; we always set a valid
cpu type in the assembler, which should then be copied over during
linking.
There are some non-gnu arc compilers that don't write an architecture
type into the e_flags field, instead leaving the field as 0, which is
the EF_ARC_CPU_GENERIC value. This non-gnu compiler uses the machine
type to distinguish between the old and newer arc architectures, setting
the machine type to EM_ARC_COMPACT for old arc600, arc601, and arc700
architectures, while using EM_ARC_COMPACT2 for newer arcem and archs
architectures.
Previously when displaying the machine flags for an older EM_ARC_COMPACT
machine, if the e_flags had not been filled in, then we relied on the
default case statement to display the message "Generic ARCompact", while
in the EM_ARC_COMPACT2 case we specifically handled EF_ARC_CPU_GENERIC
to print "ARC Generic", leaving the default case to print a message
about unrecognised cpu flag.
After this commit EF_ARC_CPU_GENERIC has been removed, for both machine
types EM_ARC_COMPACT and EM_ARC_COMPACT2 we now rely on the default case
statement to handle the situation where the e_flags has not been filled
in. The message displayed is now "Unknown ARCompact" (for older arc
architectures) and "Unknown ARC" (for the newer architectures). The
switch from "Generic" to "Unknown" in the message string is for clarity,
calling the file "Generic" can give the impression that the file is
compiled for a common sub-set of the architectures, and would therefore
run on any type of machine (or at least any type of new or old machine
depending on if the machine type is ARC or ARCv2). However, this was
not what "Generic" meant, it really meant "Unknown", so that's what we
now say.
As part of the merging of the readelf flag reading code, I have unified
the strings used in displaying the ELF ABI. This means that for older
arc machines (arc600, arc601, and arc700) the string used for the
original ABI, and ABIv2 have changed, the current ABIv3 remains the
same. For the newer architectures (arcem and archs) the abi strings
remain unchanged in all cases.
bfd/ChangeLog:
* elf32-arc.c (arc_elf_print_private_bfd_data): Remove use of
EF_ARC_CPU_GENERIC.
(arc_elf_final_write_processing): Don't bother setting cpu field
in e_flags, this will have been set elsewhere.
binutils/ChangeLog:
* readelf.c (get_machine_flags): Move arc processing into...
(decode_ARC_machine_flags): ... new function. Remove use of
EF_ARC_CPU_GENERIC, change default case from "generic arc" to
"unknown arc". Merged ABI printing between two machine types.
gas/ChangeLog:
* config/tc-arc.c (arc_select_cpu): Remove use of
EF_ARC_CPU_GENERIC.
include/ChangeLog:
* elf/arc.h (EF_ARC_CPU_GENERIC): Delete. Update related comment.
In the include/elf/arc.h there are two constants that mask out the
machine architecture field. One is used lots (EF_ARC_MACH_MSK), the
other is used only once (EF_ARC_MACH). Remove EF_ARC_MACH.
bfd/ChangeLog:
* elf32-arc.c (arc_elf_final_write_processing): Switch to using
EF_ARC_MACH_MSK.
include/ChangeLog:
* elf/arc.h (EF_ARC_MACH): Delete.
(EF_ARC_MACH_MSK): Remove out of date comment.
Symbols defined in PIE should be bound locally, the same as -shared
-Bsymbolic.
bfd/
PR ld/19827
* elf32-i386.c (elf_i386_check_relocs): Bind defined symbol
locally in PIE.
(elf_i386_relocate_section): Likewise.
* elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
(elf_x86_64_relocate_section): Likewise.
ld/
PR ld/19827
* testsuite/ld-i386/i386.exp: Run PR ld/19827 tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr19827.rd: New file.
* testsuite/ld-i386/pr19827a.S: Likewise.
* testsuite/ld-i386/pr19827b.S: Likewise.
* testsuite/ld-x86-64/pr19827.rd: Likewise.
* testsuite/ld-x86-64/pr19827a.S: Likewise.
* testsuite/ld-x86-64/pr19827b.S: Likewise.
Claudiu Zissulescu
Maciej W. Rozycki
GDB Administrator
Nick Clifton
Alan Modra
Trevor Saunders
Senthil Kumar Selvaraj
Toni Spets
Andrew Burgess
H.J. Lu
Dan Gissel