/:
Sync from GCC:
2010-05-05 Sebastian Pop <sebastian.pop@amd.com>
* configure.ac: Allow all the versions greater than 0.10 of PPL.
* configure: Regenerated.
2010-04-20 Eric Botcazou <ebotcazou@adacore.com>
* configure.ac (BUILD_CONFIG): Redirect output to /dev/null.
* configure: Regenerate.
2010-04-17 Ralf Corsépius <ralf.corsepius@rtems.org>
* configure.ac (*-*-rtems*): Add target-libiberty to $skipdirs.
* configure: Regenerate.
2010-04-16 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* configure.ac: Check for elf_getshdrstrndx or elf_getshstrndx
separately.
* configure: Regenerate.
2010-04-13 Steve Ellcey <sje@cup.hp.com>
* configure: Regenerate after change to elf.m4.
2010-04-02 Sebastian Pop <sebastian.pop@amd.com>
* configure.ac: Add brackets around AC_TRY_COMPILE alternative.
* configure: Regenerated.
2010-04-02 Sebastian Pop <sebastian.pop@amd.com>
* configure.ac: Print "buggy but acceptable" when CLooG
revision is less than 9.
* configure: Regenerated.
config/:
Sync from GCC:
2010-04-13 Steve Ellcey <sje@cup.hp.com>
* elf.m4: Add hppa[12]*-*-hpux* to list of non-elf platforms.
2010-01-05 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* stdint.m4 (GCC_HEADER_STDINT): Don't typedef uint8_t etc. if
corresponding macros already exist.
bfd/:
* configure: Regenerate.
2010-05-18 Steven Bosscher <steven AT gcc.gnu.org>
* configure.ac (--enable-lto): All *-apple-darwin* now support LTO.
* configure: Regenerate.
2010-05-07 Steven Bosscher <steven AT gcc.gnu.org>
* configure.ac (--enable-lto): Add x86_64-apple-darwin* as
a platform that supports LTO.
* configure: Regenerate.
2010-04-27 Dave Korn <dave.korn.cygwin AT gmail.com>
PR lto/42776
* configure.ac (--enable-lto): Refactor handling so libelf tests
are only performed inside then-clause of ACX_ELF_TARGET_IFELSE,
and allow LTO to be explicitly enabled on non-ELF platforms that
are known to support it inside else-clause.
* configure: Regenerate.
/:
PR bootstrap/43328
* configure.ac: Do not pass --enable-multilib nor
--disable-multilib in baseargs. Accept explicitly passed
--enable_multilib.
* configure: Regenerate.
2010-03-19 Jack Howarth <howarth@bromo.med.uc.edu>
PR ada/42554
* configure.ac: Only pass -c to ranlib for darwin9 and earlier.
* configure: Regenerate.
* Makefile.tpl (local-distclean): Also remove config.cache files in
sub-directories as there may not be Makefiles present in the
sub-directories.
* Makefile.in: Regenerate.
* configure.ac: Revert previous delta.
* configure: Regenerate.
of ppl and cloog. Fix in-tree configury of libelf, skip tests.
Fix portability of test of C++ as bootstrap language. Add
ppl/src/ppl-config.o to the bootstrap compare exclusion list.
* configure: Rebuild.
* Makefile.def: Drop host and target settings from gmp, mpfr, ppl,
and cloog. Fix in-tree ppl configuration. Introduce libelf
in-tree building.
* Makefile.tpl (POSTSTAGE1_CXX_EXPORT): New.
(POSTSTAGE1_HOST_EXPORTS): Use it.
(STAGE[+id+]_CXXFLAGS): New.
(BASE_FLAGS_TO_PASS): Pass it down.
(configure-stage[+id+]-[+prefix+][+module+]): Use it. Add
extra_exports.
(all-stage[+id+]-[+prefix+][+module+]): Likewise.
(configure-[+prefix+][+module+], all-[+prefix+][+module+]): Add
extra_exports.
* Makefile.in: Rebuild.
* configure.ac (FLAGS_FOR_TARGET): Add -L and -isystem
paths for *-w64-mingw* and x86_64-*mingw*.
* configure: Regenerated.
* configure.ac: Disable target-winsup & co for
x86_64-*-mingw* and *-w64-mingw* targets.
* configure: Regenerated.
* configure.ac (CLooG test): Use = with test.
* configure: Regenerate.
* configure.ac: Do not set LIBS for ppl/cloog checks. Disable
cloog if the ppl version check failed. Move flags saving
before setting in libelf check.
* configure: Regenerate.
* configure.ac: Adjust the ppl and cloog configure to work as
documented. Disable cloog if ppl was disabled. Omit the version
checks if they were disabled.
* configure: Re-generate.
/:
* configure.ac: Do not use $extrasub for replacing @if/@endif
parts in Makefile; instead, use additional arguments to
AC_CONFIG_COMMANDS to do the replacement manually, with several
sed invocations, to avoid HP-UX sed command limits.
* configure: Regenerate.
/:
* configure.ac: Call AC_DISABLE_OPTION_CHECKING.
(baseargs): Add --disable-option-checking.
* configure: Regenerate.
config/:
* override.m4 (AC_DISABLE_OPTION_CHECKING): Define to be
empty if not defined, to avoid error with 2.59.
(_AC_LANG_IO_PROGRAM): When the Autoconf version is exactly
2.64, avoid per-language instances to drop fopen from test
program.
/:
2009-07-31 Christian Bruel <christian.bruel@st.com>
* configure.ac (sh*-*-elf): Don't add target-libgloss to noconfigdirs.
* configure: Regenerate.
2009-07-06 Ian Lance Taylor <iant@google.com>
* configure.ac: Add missing comma in AC_ARG_WITH(boot-libs).
* configure: Rebuild.
2009-06-26 Steve Ellcey <sje@cup.hp.com>
PR bootstrap/40338
* configure.ac (comparestring): Create new variable.
* Makefile.tpl (comparestring): Use to skip some comparisions.
* configure: Regenerate.
* Makefile.in: Regenerate.
2009-06-23 Ian Lance Taylor <iant@google.com>
* configure.ac: Add --enable-build-with-cxx. When set, add c++ to
boot_languages. Only bootstrap target libraries listed in
target_libs for some boot language. Add --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs. Remove
with_host_libstdcxx from ppllibs. Only add -fkeep-inline-functions
if not building with C++.
* Makefile.def: For target_module libstdc++-v3, set bootstrap=true.
* Makefile.tpl (STAGE1_LDFLAGS, STAGE1_LIBS): New variables.
(POSTSTAGE1_LDFLAGS, POSTSTAGE1_LIBS): New variables.
(HOST_EXPORTS): Add STAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_HOST_EXPORTS): Set CXX and CXX_FOR_BUILD. Add
POSTSTAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_FLAGS_TO_PASS): Likewise.
* configure, Makefile.in: Rebuild.
2009-06-08 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* configure.ac: Detect MPC in default directory.
* configure: Regenerate.
2009-06-02 Richard Sandiford <r.sandiford@uk.ibm.com>
* configure.ac (powerpc-*-aix*, rs6000-*-aix*): Add target-newlib
to noconfdirs.
* configure: Regenerate.
2009-05-29 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* Makefile.def: Add MPC support and dependencies.
* configure.ac: Likewise. Reorganize GMP/MPFR checks.
* Makefile.in, configure: Regenerate.
2009-05-24 Nicolas Roche <roche@adacore.com>
* Makefile.tpl (compare-target): Skip ./ada/*tools directories.
* Makefile.in: Regenerate.
2009-05-21 Dave Korn <dave.korn.cygwin@gmail.com>
* configure.ac (cygwin noconfigdirs): Remove libgcj.
* configure: Regenerate.
2009-05-07 Dave Korn <dave.korn.cygwin@gmail.com>
* configure.ac ($with_ppl): Default to no if not supplied.
($with_cloog): Likewise.
configure: Regenerate.
2009-04-24 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
PR bootstrap/39739
* configure.ac (extra_mpfr_configure_flags): Set and AC_SUBST.
* Makefile.def (module=mpfr): Use extra_mpfr_configure_flags.
* configure, Makefile.in: Regenerate.
2009-04-14 Jakub Jelinek <jakub@redhat.com>
* configure.ac: Change copyright header to refer to version
3 of the GNU General Public License and to point readers at the
COPYING3 file and the FSF's license web page.
* Makefile.def: Likewise.
* Makefile.tpl: Likewise.
* Makefile.in: Regenerate.
2009-04-09 Jack Howarth <howarth@bromo.med.uc.edu>
* configure.ac: Restore match for darwin9 or later. Use double
brackets since regeneration eats one pair.
* configure: Regenerate.
Sync with GCC:
2008-12-12 Sebastian Pop <sebastian.pop@amd.com>
* configure.ac (ppllibs): Add by default the lib flags.
* configure: Regenerate.
2008-12-04 Jack Howarth <howarth@bromo.med.uc.edu>
* configure.ac: Add double brackets on darwin[912].
* configure: Regenerate.
2008-12-02 Jack Howarth <howarth@bromo.med.uc.edu>
* configure.ac: Expand to darwin10 and later.
* configure: Regenerate.
* configure: Regenerate.
config/
* mt-mips16-compat: New file, taken from mt-mips-elfoabi.
* mt-mips-elfoabi: Include mt-mips16-compat.
* mt-mips-gnu: New file.
config/
* override.m4: Use m4_version_prereq throughout.
(_AC_ARG_VAR_VALIDATE, AC_MSG_FAILURE): Backport from git
Autoconf: output pwd along with fatal errors, so the right
config.log file is hinted at more prominently.
(PARSE_ARGS): Push setting of ac_pwd in this diversion.
(_GCC_AUTOCONF_VERSION): New, define to 2.59 if not defined.
(_GCC_AUTOCONF_VERSION_CHECK): New macro, require use of Autoconf
version _GCC_AUTOCONF_VERSION throughout the tree.
(m4_wrap): New override, fix for Posix semantics of m4wrap.
binutils/
* configure: Regenerate.
opcodes/
* configure: Regenerate.
bfd/
* configure: Regenerate.
gas/
* configure: Regenerate.
gprof/
* configure: Regenerate.
ld/
* config.in: Regenerate.
* configure: Regenerate.
Sync with gcc:
2008-04-18 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/35457
* configure.ac: Include override.m4.
* configure: Regenerate.
2008-04-18 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (restrap): Call `make all' using double-colon rules.
* Makefile.in: Regenerate.
2008-04-11 Eric B. Weddington <eweddington@cso.atmel.com>
* configure.ac: Do not build libssp for the AVR.
* configure: Regenerate.
config:
2008-04-18 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/35457
* override.m4: Add this. Make sure aclocal always picks it.
Add more lenient precious variable check, backported from
autoconf trunk.
* acx.m4 (ACX_CHECK_CYGWIN_CAT_WORKS): New macro to check that
cygwin builds are not running in textmode.
* configure.ac: Run ACX_CHECK_CYGWIN_CAT_WORKS for cygwin hosted
builds.
* configure: Regenerate.
PR bootstrap/32009
PR bootstrap/32161
* configure.ac (CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Compute here.
* configure: Regenerate.
* Makefile.def: Define stage_libcflags for all bootstrap stages.
* Makefile.tpl (BOOT_LIBCFLAGS, STAGE2_LIBCFLAGS, STAGE3_LIBCFLAGS,
STAGE4_LIBCFLAGS): New.
(CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Subst from autoconf, without
$(SYSROOT_CFLAGS_FOR_TARGET) and $(DEBUG_PREFIX_CFLAGS_FOR_TARGET).
(BASE_TARGET_EXPORTS): Append them here to C{,XX}FLAGS.
(EXTRA_TARGET_FLAGS): Append them here to {LIB,}C{,XX}FLAGS.
(configure-stage[+id+]-[+prefix+][+module+]): Pass stage_libcflags
for target modules. Don't export LIBCFLAGS.
(all-stage[+id+]-[+prefix+][+module+]): Pass stage_libcflags; pass
$(BASE_FLAGS_TO_PASS) where [+args+] was passed, and [+args+] after
the overridden CFLAGS_FOR_TARGET and CXXFLAGS_FOR_TARGET.
(invocations of `all'): Replace $(TARGET_FLAGS_TO_PASS) with
$(EXTRA_TARGET_FLAGS), $(FLAGS_TO_PASS) with $(EXTRA_HOST_FLAGS).
* Makefile.in: Regenerate.
config:
2008-02-20 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/32009
* mh-ppc-darwin (BOOT_CFLAGS): Reenable.
only for $host = $build.
Set default CXXFLAGS_FOR_BUILD to CXXFLAGS, not CFLAGS.
Set default LDFLAGS_FOR_BUILD to LDFLAGS, not CFLAGS.
* configure: Regenerate.
* configure.ac: Remove mips64*-*-linux* noconfigdirs section, thus
enabling libgcj.
* configure: Regenerate.
2007-09-12 Richard Guenther <rguenther@suse.de>
* configure.ac (--enable-stage1-checking): If neither --enable-checking
nor --disable-checking is provided also turn on yes and types
checking for stage1.
* configure: Re-generate.
PR other/32154
* configure.ac: For libgloss targets, point the linker to the linker
script, startup code and simulator library.
* configure: Regenerate.
Nigel Stephens <nigel@mips.com>
* config/mt-sde: New file.
* configure.ac (mips*-sde-elf*): New stanza. Use config/mt-sde
as target_makefile_frag.
* configure: Regenerate.
* configure: Rebuilt.
config/ChangeLog:
* acx.m4 (NCN_STRICT_CHECK_TOOLS): Mark environment variable as
precious. Prefer it over a cached value. Use cached value
verbosely.
(NCN_STRICT_CHECK_TARGET_TOOLS): Likewise. Don't override
environment variable with build-time tools.
* configure.in: Change == to = in test command.
* configure: Regenerate.
2007-01-11 Paolo Bonzini <bonzini@gnu.org>
* warnings.m4: Use m4_expand_once to clear the AC_SUBST'ed variable.
(ACX_PROG_CC_WARNINGS_ARE_ERRORS): Fix typo. Add optional 2nd argument.
Sync with gcc:
2006-12-29 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Reorganize recognition of languages. Add
--enable-stage1-languages. Show supported languages for the chosen
target rather than all recognized languages.
* configure: Regenerate.
2006-12-29 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (GCC_STRAP_TARGETS, all-prebootstrap): Remove.
* Makefile.in: Regenerate.
2006-12-29 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* configure.in: Warn that MPFR 2.2.0 is buggy.
* configure: Regenerate.
config:
2006-12-29 Paolo Bonzini <bonzini@gnu.org>
* acx.m4: Sync with gcc.
Sync with gcc:
2006-12-19 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Remove "$build" case for powerpc-*-darwin* since
it only affects bootstrap and could be tested on "$host" as well.
* configure: Regenerate.
* config/mh-ppc-darwin: Add to the stage1 cflags here.
2006-12-19 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/29544
* Makefile.def (flags_to_pass): Add STAGE1_CHECKING.
(bootstrap_stage): Add STAGE1_CHECKING to stage1 configure flags,
move here comment from Makefile.tpl.
* Makefile.tpl: Move some definitions higher in the file.
(STAGE1_CHECKING): New.
* configure.in: Add --enable-stage1-checking.
* configure: Regenerate.
* Makefile.in: Regenerate.
2006-12-03 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* configure.in: Update error message for missing GMP/MPFR.
* configure: Regenerate.
2006-12-02 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* configure.in: Update MPFR version in error message.
* configure: Regenerate.
2006-11-26 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* configure.in (--with-mpfr-dir, --with-gmp-dir): Remove flags.
(--with-mpfr-include, --with-mpfr-lib, --with-gmp-include,
--with-gmp-lib): New flags.
* configure: Regenerate.
config:
2006-12-04 Eric Botcazou <ebotcazou@libertysurf.fr>
* tls.m4 (GCC_CHECK_TLS): Do not test TLS with static linking
if static linking doesn't even work.
Never build newlib as Mingw target library.
Test the existence of winsup/cygwin for building a Cygwin newlib,
rather than just winsup.
Add winsup/mingw and winsup/w32api paths to FLAGS_FOR_TARGET if
building a Mingw target.
* configure: Regenerate.
2006-07-04 Eric Botcazou <ebotcazou@libertysurf.fr>
PR bootstrap/18058
* configure.in: Add -fkeep-inline-functions to CFLAGS for stage 1
if the bootstrap compiler is a GCC version that supports it.
* configure: Regenerate.
config:
2006-07-21 David Daney <ddaney@avtrex.com>
PR libgcj/28426
* gxx-include-dir.m4: Use target_alias in path for cross build.
Sync from gcc:
2007-07-03 Paolo Bonzini <bonzini@gnu.org>
PR other/27063
* configure.in: Test subdir_requires and give an appropriate
error message.
* configure: Regenerate.
2006-06-16 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
PR target/27540
* configure.in: Only enable libgomp on IRIX 6.
* configure: Regenerate.
PR bootstrap/28072
* configure.in: Add target-boehm-gc to noconfigdirs depending on
whether target-libjava is being configured instead of whether the
java front end is enabled.
* configure: Regenerate.
Sync from gcc:
2006-06-12 David Ayers <d.ayers@inode.at>
PR bootstrap/27963
PR target/19970
* configure.in: Remove target-boehm-gc from noconfigdirs where
${libgcj} is specified.
* configure: Regenerate.
Sync from gcc:
2006-06-06 David Ayers <d.ayers@inode.at>
PR libobjc/13946
* Makefile.def: Add dependencies for libobjc which boehm-gc.
* Makefile.in: Regenerate.
* configure.in: Add --enable-objc-gc at toplevel and have it
enable boehm-gc for Objective-C.
Remove target-boehm-gc from libgcj.
Add target-boehm-gc to target_libraries.
Add target-boehm-gc to noconfigdirs where ${libgcj}
is specified.
Assert that boehm-gc is supported when requested for Objective-C.
Only build boehm-gc if needed either for Java or Objective-C.
* configure: Regenerate.
2006-06-05 Paolo Bonzini <bonzini@gnu.org>
PR 27674
* Makefile.tpl (configure-[+prefix+][+module+],
all-[+prefix+][+module+]): Depend on stage_current if bootstrapping.
Remove rule to unstage bootstrapped modules.
(stage_current): New.
* Makefile.in: Regenerate.
2006-05-20 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
Andreas Tobler <a.tobler@schweiz.ch>
* configure.in: Enable libgcj for hppa*-hp-hpux11*.
* configure: Rebuilt.
Revert
2006-01-31 Richard Guenther <rguenther@suse.de>
Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (target_modules): Add libgcc-math target module.
* configure.in (target_libraries): Add libgcc-math target library.
(--enable-libgcc-math): New configure switch.
* Makefile.in: Re-generate.
* configure: Re-generate.
PR bootstrap/25670
* Makefile.tpl ([+compare-target+]): Print explanation messages.
* Makefile.def (ADAFLAGS, BOOT_ADAFLAGS, LANGUAGES): New flags_to_pass.
* Makefile.tpl (BASE_FLAGS_TO_PASS): Support optional flags_to_pass.
(EXTRA_GCC_FLAGS): Remove ADAFLAGS, BOOT_ADAFLAGS, LANGUAGES,
BUILD_PREFIX, BUILD_PREFIX_1.
* configure.in: (BUILD_PREFIX, BUILD_PREFIX_1): Don't substitute.
* Makefile.def (bootstrap stage 1): Pass LIBCFLAGS too.
* Makefile.tpl (POSTSTAGE1_FLAGS_TO_PASS): Override LIBCFLAGS too.
* Makefile.tpl (configure-stage[+id+]-[+prefix+][+module+],
all-stage[+id+]-[+prefix+][+module+], : Use $(current_stage) instead
of `cat stage_current`. Always provide the `r' and `s' variables.
(clean-stage[+id+]-[+prefix+][+module+]): Likewise, and make it into
a single shell execution.
(configure-[+prefix+][+module+], all-[+prefix+][+module+]): For
bootstrapped modules, make the stage1 module if the build was not
started yet, else build the current stage.
(all-host, all-target): Omit bootstrapped modules (if bootstrapping).
(all-build, all-host, all-target, [+make_target+]-host,
[+make_target+]-target): Do not use \-continued lines.
(target modules): Depend on stage_last, not all-gcc, if bootstrapping.
(current_stage, restrap, stage_last): New.
* Makefile.in: Regenerate.
* configure: Regenerate.
Andreas Schwab <schwab@suse.de>
* configure: Regenerate.
config:
2006-02-14 Paolo Bonzini <bonzini@gnu.org>
Andreas Schwab <schwab@suse.de>
* acx.m4 (NCN_STRICT_CHECK_TARGET_TOOLS): Use correct program name.
(ACX_CHECK_INSTALLED_TARGET_TOOL): Likewise, and always set $1.
* configure.in: Set with_gnu_as, with_gnu_ld, with_newlib earlier.
Set md_exec_prefix. Use ACX_CHECK_INSTALLED_TARGET_TOOL to find
the assembler, linker and binutils.
* configure: Regenerate.
config:
2006-01-16 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (NCN_STRICT_CHECK_TARGET_TOOLS): Test $with_build_time_tools.
(ACX_PATH_SEP): New.
(ACX_TOOL_DIRS): Move here from the gcc directory.
(ACX_CHECK_INSTALLED_TARGET_TOOL): New.
(GCC_TARGET_TOOL): Do not use a host tool if we found a target tool
with a complete path in either $with_build_time_tools or $exec_prefix.
Sync from gcc:
2006-01-04 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/24252
* Makefile.def (flags_to_pass): Add STAGE1_CFLAGS and STAGE1_LANGUAGES.
* Makefile.tpl (OBJDUMP): New.
(EXTRA_HOST_FLAGS): Add it.
(EXTRA_GCC_FLAGS): Remove flags already specified in flags_to_pass.
* Makefile.tpl (stage[+id+]-start, stage[+id+]-end): Do not try
to use symbolic links between directories. Avoid race conditions
or make them harmless.
* configure.in: Do not try to use symbolic links between directories.
* Makefile.def (LEAN): Pass.
* Makefile.tpl (LEAN): Define.
(stage[+id+]-start): Accept that the previous directory does not
exist, if the bootstrap is lean.
(stage[+id+]-bubble): Invoke lean bootstrap commands after
stage[+id+]-start. Use a makefile variable and an `if' instead of a
configure substitution.
([+compare-target+]): Likewise.
([+bootstrap-target+]-lean): New.
* configure.in: Remove lean bootstrap support from here.
* Makefile.in: Regenerate.
* configure: Regenerate.
2006-01-02 Andreas Schwab <schwab@suse.de>
* configure.in: When reconfiguring remove Makefile in
all stage directories.
* configure: Regenerate.
Revert Ada-related part of the previous change.
* Makefile.def (ADAFLAGS, BOOT_ADAFLAGS, ADAFLAGS_FOR_TARGET):
Do not pass.
* Makefile.tpl (BOOT_ADAFLAGS): Do not define.
* Makefile.in: Regenerate.
* configure.in: Do not include mt-ppc-aix target fragment.
* configure: Regenerate.
config:
2005-12-20 Paolo Bonzini <bonzini@gnu.org>
Revert Ada-related part of the previous change.
* mt-ppc-aix: Delete.
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
Sync with gcc:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
2005-11-29 Ben Elliston <bje@au.ibm.com>
* Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc
from the gcc build directory.
* Makefile.in: Regenerate.
2005-11-29 Ben Elliston <bje@au.ibm.com>
* Makefile.def: Add new libdecnumber host_module. Make all-gcc
depend on all-libdecnumber.
* configure.in (host_libs): Include libdecnumber.
* Makefile.in: Regenerate.
* configure: Likewise.
2005-11-21 Kean Johnston <jkj@sco.com>
* config.sub, config.guess: Sync from upstream sources.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
* Makefile.tpl (CONFIGURE_GDB_TK, INSTALL_GDB_TK): New variables.
(configure-gdb, install-gdb): New rules.
* configure.in: Set CONFIGURE_GDB_TK and INSTALL_GDB_TK.
* Makefile.in, configure: Regenerated.
PR bootstrap/22340
* configure.in (default_target): Remove.
* Makefile.tpl (all): Do not use prerequisites as subroutines
(all) [gcc-bootstrap]: Bootstrap gcc first if it was not done yet.
(do-[+make_target+], check, install, [+bootstrap_target+]): Do not
use prerequisites as subroutines.
(check-host, check-target): New.
(bootstrap configure & all targets): Do not use stage*-start
if the directory layout is already ok.
(non-bootstrap configure & all targets): Prepend a $(unstage).
(stage[+id+]-bubble): Do that here. Do not use NOTPARALLEL.
(NOTPARALLEL): Remove.
(unstage, stage variables): New variables.
(unstage, stage targets): Simply expand to those variables.
* configure: Regenerate.
* Makefile.in: Regenerate.
* configure.in (powerpc-*-aix*): Add target-libssp to noconfigdirs.
(rs6000-*-aix*): Same.
* configure: Regenerate.
2005-09-14 Francois-Xavier Coudert <coudert@clipper.ens.fr>
* configure.in: Recognize f95 in the --enable-languages option,
and substitute it for fortran, issuing a warning.
* configure: Regenerate.
2005-08-12 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Replace NCN_STRICT_CHECK_TOOL with
NCN_STRICT_CHECK_TOOLS, and likewise for NCN_STRICT_CHECK_TARGET_TOOLS.
Look for alternate names of the target cc and c++
config:
2005-08-12 Paolo Bonzini <bonzini@gnu.org>
* config/acx.m4 (NCN_CHECK_TARGET_TOOL, NCN_STRICT_CHECK_TOOL,
NCN_STRICT_CHECK_TARGET_TOOL): Remove.
(NCN_STRICT_CHECK_TOOLS, NCN_STRICT_CHECK_TARGET_TOOLS): New,
2005-07-14 Jim Blandy <jimb@redhat.com>
* configure.in: Add cases for Renesas m32c.
* configure: Regenerated.
bfd/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for m32c-*-elf (Renesas m32c and m16c).
* Makefile.am (ALL_MACHINES): Add cpu-m32c.lo.
(ALL_MACHINES_CFILES): Add cpu-m32c.c.
(BFD32_BACKENDS): Add elf32-m32c.lo.
(BFD32_BACKENDS_CFILES): Add elf32-m32c.c.
(cpu-m32c.lo, elf32-m32c.lo): New rules, generated by 'make dep-am'.
* Makefile.in: Regenerated.
* archures.c (bfd_arch_m32c, bfd_mach_m16c, bfd_mach_m32c): New
arch and mach codes.
(bfd_m32c_arch): New arch info object.
(bfd_archures_list): List bfd_m32c_arch.
* bfd-in2.h: Regenerated.
* config.bfd: Add case for the m32c.
* configure.in: Add case for the m32c.
* configure: Regenerated.
* cpu-m32c.c, elf32-m32c.c: New files.
* libbfd.h: Regenerated.
* targets.c (bfd_elf32_m32c_vec): Declare.
(_bfd_target_vector): List bfd_elf32_m32c_vec.
binutils/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* readelf.c: #include "elf/m32c.h"
(guess_is_rela, dump_relocations, get_machine_name): Add cases for
EM_M32C.
* Makefile.am (readelf.o): Update dependencies.
* Makefile.in: Regenerated.
cpu/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* m32c.cpu, m32c.opc: Machine description for the Renesas M32C.
gas/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C.
* Makefile.am (CPU_TYPES): List m32c.
(TARGET_CPU_CFILES): List config/tc-m32c.c.
(TARGET_CPU_HFILES): List config/tc-m32c.h.
* configure.in: Add case for m32c.
* configure.tgt: Add cases for m32c and m32c-*-elf.
* configure: Regenerated.
* config/tc-m32c.c, config/tc-m32c.h: New files.
* doc/Makefile.am (CPU_DOCS): Add c-m32c.texi.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set M32C.
* doc/as.texinfo: Add text for the M32C-specific options and line
comment characters, and refer to c-m32c.texi.
* doc/c-m32c.texi: New file.
include/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* dis-asm.h (print_insn_m32c): New declaration.
include/elf/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for Renesas M32C and M16C.
* common.h (EM_M32C): New machine number.
* m32c.h: New file.
ld/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* Makefile.am (ALL_EMULATIONS): Add eelf32m32c.o.
(eelf32m32c.c): New target.
* Makefile.in: Regenerated.
* configure.tgt: Add case for m32c-*-elf.
* emulparams/elf32m32c.sh: New file.
opcodes/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c: New.
* m32c-desc.h, m32c-opc.h: New.
* Makefile.am (HFILES): List m32c-desc.h and m32c-opc.h.
(CFILES): List m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c,
m32c-opc.c.
(ALL_MACHINES): List m32c-asm.lo, m32c-desc.lo, m32c-dis.lo,
m32c-ibld.lo, m32c-opc.lo.
(CLEANFILES): List stamp-m32c.
(M32C_DEPS): List stamp-m32c, if CGEN_MAINT.
(CGEN_CPUS): Add m32c.
(m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c)
(m32c-desc.h, m32c-opc.h): Depend on M32C_DEPS.
(m32c_opc_h): New variable.
(stamp-m32c, m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo)
(m32c-opc.lo): New rules.
* Makefile.in: Regenerated.
* configure.in: Add case for bfd_m32c_arch.
* configure: Regenerated.
* disassemble.c (ARCH_m32c): New.
[ARCH_m32c]: #include "m32c-desc.h".
(disassembler) [ARCH_m32c]: Add case for bfd_arch_m32c.
(disassemble_init_for_target) [ARCH_m32c]: Same.
* cgen-ops.h, cgen-types.h: New files.
* Makefile.am (HFILES): List them.
* Makefile.in: Regenerated.
<mmix-knuth-mmixware>: Set unsupported_languages. Name explicit
non-ported target libraries in noconfigdirs.
<cris-*, crisv32-*> Ditto, except for non-aout, non-elf,
non-linux-gnu. Remove libgcj_ex_libffi.
<lang_frag loop>: Set add_this_lang=no if the language is in
unsupported_languages.
* configure: Regenerate.
Sync from gcc:
2005-04-22 Bernd Schmidt <bernd.schmidt@analog.com>
* config.sub: Update from master copy.
2005-04-19 Hans-Peter Nilsson <hp@axis.com>
* configure.in <crisv32-*-*, cris-*-*>: New local variable
libgcj_ex_libffi. Have specific match for *-*-linux*. Separate
matches for "*-*-aout" and "*-*-elf". Don't disable libffi for
"*-*-elf" and "*-*-linux*".
* configure: Regenerate.
config:
2005-04-29 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (ACX_PROG_GNAT): Remove stray break.
* Makefile.def: Remove libstdcxx_incdir, libsubdir, gxx_include_dir,
gcc_version, and gcc_version_trigger from set of flags to pass.
* Makefile.tpl: Remove definitions of above variables.
(config.status): Remove dependency on $(gcc_version_trigger).
* Makefile.in: Regenerate.
* configure.in: Do not reference config/gcc-version.m4 nor
config/gxx-include-dir.m4. Do not invoke TL_AC_GCC_VERSION nor
TL_AC_GXX_INCLUDE_DIR. Do not set gcc_version_trigger.
* configure: Regenerate.
config:
* gxx-include-dir.m4: In all substitutions, leave $(gcc_version)
to be expanded by the Makefile.
Sync from gcc.
2005-02-28 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/17383
* Makefile.def (target_modules): Remove "stage", now unnecessary.
* Makefile.tpl (HOST_SUBDIR): New substitution.
(STAGE_HOST_EXPORTS, EXPECT, HOST_LIB_PATH, USUAL_AR_FOR_TARGET,
USUAL_AS_FOR_TARGET, USUAL_DLLTOOL_FOR_TARGET, USUAL_GCC_FOR_TARGET,
USUAL_LD_FOR_TARGET, USUAL_NM_FOR_TARGET, USUAL_OBJDUMP_FOR_TARGET,
USUAL_RANLIB_FOR_TARGET, USUAL_WINDRES_FOR_TARGET): Use it.
(Host modules, Bootstrapped modules): Use it.
(Build modules, Target modules): Do not create symlink trees,
always configure out-of-srcdir.
(distclean): Try removing $(host_subdir) with rm before using rm -rf.
* configure.in (FLAGS_FOR_TARGET, CC_FOR_TARGET, GCJ_FOR_TARGET,
GFORTRAN_FOR_TARGET, CXX_FOR_TARGET, RAW_CXX_FOR_TARGET): Use
$(HOST_SUBDIR). Create a symlink for host_subdir.
* Makefile.in: Regenerate.
* configure: Regenerate.
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
config:
2005-02-28 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/17383
* acx.m4 (GCC_TOPLEV_SUBDIRS): Set HOST_SUBDIR if an in-src
gcc build is going.
* configure.in: Remove all instances of build-fixincludes from
noconfigdirs.
(build_configargs): Supply --target to subdirectories.
* configure: Regenerate.
* Makefile.def: Make gcc install depend on fixincludes install.
* Makefile.in: Regenerate.