This patch aims to turn 'set print inferior-events' always on, and do
some cleanup on the messages printed by GDB when various inferior
events happen (attach, detach, fork, kill, exit).
To make sure that the patch is correct, I've tested it with a handful
of combinations of 'set follow-fork-mode', 'set detach-on-fork' and
'set print inferior-events'. In the end, I decided to make my
hand-made test into an official testcase. More on that below.
Using the following program as an example:
#include <unistd.h>
int main ()
{
fork ();
return 0;
}
We see the following outputs from the patched GDB:
- With 'set print inferior-events on':
(gdb) r
Starting program: a.out
[Detaching after fork from child process 27749]
[Inferior 1 (process 27745) exited normally]
(gdb)
- With 'set print inferior-events off':
(gdb) r
Starting program: a.out
[Inferior 1 (process 27823) exited normally]
(gdb)
Comparing this against an unpatched GDB:
- With 'set print inferior-events off' and 'set follow-fork-mode
child':
(gdb) r
Starting program: a.out
[Inferior 2 (process 5993) exited normally]
(gdb)
Compare this against an unpatched GDB:
(unpatched-gdb) r
Starting program: a.out
[New process 5702]
[Inferior 2 (process 5702) exited normally]
(unpatched-gdb)
It is possible to notice that, in this scenario, the patched GDB
will lose the '[New process %d]' message.
- With 'set print inferior-events on', 'set follow-fork-mode child'
and 'set detach-on-fork on':
(gdb) r
Starting program: a.out
[Attaching after process 27905 fork to child process 27909]
[New inferior 2 (process 27909)]
[Detaching after fork from parent process 27905]
[Inferior 1 (process 27905) detached]
[Inferior 2 (process 27909) exited normally]
(gdb)
Compare this output with an unpatched GDB, using the same settings:
(unpatched-gdb) r
Starting program: a.out
[New inferior 28033]
[Inferior 28029 detached]
[New process 28033]
[Inferior 2 (process 28033) exited normally]
[Inferior 28033 exited]
(unpatched-gdb)
As can be seen above, I've also made a few modifications to messages
that are printed when 'set print inferior-events' is on. For example,
a few of the messages did not contain the '[' and ']' as
prefix/suffix, which led to a few inconsistencies like:
Attaching after process 22995 fork to child process 22999.
[New inferior 22999]
Detaching after fork from child process 22999.
[Inferior 22995 detached]
[Inferior 2 (process 22999) exited normally]
So I took the opportunity and included the square brackets where
applicable. I have also made the existing messages more uniform, by
always printing "Inferior %d (process %d)..." where applicable. This
makes it easier to identify the inferior number and the PID number
from the messages.
As suggested by Pedro, the "[Inferior %d exited]" message from
'exit_inferior' has been removed, because it got duplicated when
'inferior-events' is on. I'm also using the
'add_{thread,inferior}_silent' versions (instead of their verbose
counterparts) on some locations, also to avoid duplicated messages.
For example, a patched GDB with 'set print inferior-events on', 'set
detach-on-fork on' and 'set follow-fork-mode child', but using
'add_thread', would print:
(gdb) run
Starting program: a.out
[Attaching after process 25088 fork to child process 25092.]
[New inferior 25092] <--- duplicated
[Detaching after fork from child process 25092.]
[Inferior 25088 detached]
[New process 25092] <--- duplicated
[Inferior 2 (process 25092) exited normally]
But if we use 'add_thread_silent' (with the same configuration as
before):
(gdb) run
Starting program: a.out
[Attaching after process 31606 fork to child process 31610]
[New inferior 2 (process 31610)]
[Detaching after fork from parent process 31606]
[Inferior 1 (process 31606) detached]
[Inferior 2 (process 31610) exited normally]
As for the tests, the configuration options being exercised are:
- follow-fork-mode: child/parent
- detach-on-fork: on/off
- print inferior-events: on/off
It was also necessary to perform adjustments on several testcases,
because the expected messages changed considerably.
Built and regtested on BuildBot, without regressions.
gdb/ChangeLog:
2018-04-24 Jan Kratochvil <jan.kratochvil@redhat.com>
Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* infcmd.c (kill_command): Print message when inferior has
been killed.
* inferior.c (print_inferior_events): Remove 'static'. Set as
'1'.
(add_inferior): Improve message printed when
'print_inferior_events' is on.
(exit_inferior): Remove message printed when
'print_inferior_events' is on.
(detach_inferior): Improve message printed when
'print_inferior_events' is on.
(initialize_inferiors): Use 'add_inferior_silent' to set
'current_inferior_'.
* inferior.h (print_inferior_events): Declare here as
'extern'.
* infrun.c (follow_fork_inferior): Print '[Attaching...]' or
'[Detaching...]' messages when 'print_inferior_events' is on.
Use 'add_thread_silent' instead of 'add_thread'. Add '[' and ']'
as prefix/suffix for messages. Remove periods. Fix erroneous
'Detaching after fork from child...', replace it by '... from
parent...'.
(handle_vfork_child_exec_or_exit): Add '[' and ']' as
prefix/suffix when printing 'Detaching...' messages. Print
them when 'print_inferior_events' is on.
* remote.c (remote_detach_1): Print message when detaching
from inferior and '!is_fork_parent'.
gdb/testsuite/ChangeLog:
2018-04-24 Jan Kratochvil <jan.kratochvil@redhat.com>
Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* gdb.base/attach-non-pgrp-leader.exp: Adjust 'Detaching...'
regexps to expect for '[Inferior ... detached]' as well.
* gdb.base/attach.exp: Likewise.
* gdb.base/catch-syscall.exp (check_for_program_end): Adjust
"gdb_continue_to_end".
(test_catch_syscall_with_wrong_args): Likewise.
* gdb.base/foll-fork.exp: Adjust regexps to match '[' and
']'. Don't set 'verbose' on.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/fork-print-inferior-events.c: New file.
* gdb.base/fork-print-inferior-events.exp: New file.
* gdb.base/hook-stop.exp: Adjust regexps to expect for new
'[Inferior ... has been killed]' message.
* gdb.base/kill-after-signal.exp: Likewise.
* gdb.base/solib-overlap.exp: Adjust regexps to expect for new
detach message.
* gdb.threads/kill.exp: Adjust regexps to expect for new kill
message.
* gdb.threads/clone-attach-detach.exp: Adjust 'Detaching...'
regexps to expect for '[Inferior ... detached]' as well.
* gdb.threads/process-dies-while-detaching.exp: Likewise.
This converts observers from using a special source-generating script
to be plain C++. This version of the patch takes advantage of C++11
by using std::function and variadic templates; incorporates Pedro's
patches; and renames the header file to "observable.h" (this change
eliminates the need for a clean rebuild).
Note that Pedro's patches used a template lambda in tui-hooks.c, but
this failed to compile on some buildbot instances (presumably due to
differing C++ versions); I replaced this with an ordinary template
function.
Regression tested on the buildbot.
gdb/ChangeLog
2018-03-19 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* unittests/observable-selftests.c: New file.
* common/observable.h: New file.
* observable.h: New file.
* ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c,
arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c,
breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c,
corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c,
extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c,
infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c,
linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c,
mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c,
ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c,
python/py-breakpoint.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c,
record-btrace.c, record-full.c, record.c, regcache.c, remote.c,
riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c,
spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c,
symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c,
tui/tui-interp.c, valops.c: Update all users.
* tui/tui-hooks.c (tui_bp_created_observer)
(tui_bp_deleted_observer, tui_bp_modified_observer)
(tui_inferior_exit_observer, tui_before_prompt_observer)
(tui_normal_stop_observer, tui_register_changed_observer):
Remove.
(tui_observers_token): New global.
(attach_or_detach, tui_attach_detach_observers): New functions.
(tui_install_hooks, tui_remove_hooks): Use
tui_attach_detach_observers.
* record-btrace.c (record_btrace_thread_observer): Remove.
(record_btrace_thread_observer_token): New global.
* observer.sh: Remove.
* observer.c: Rename to observable.c.
* observable.c (namespace gdb_observers): Define new objects.
(observer_debug): Move into gdb_observers namespace.
(struct observer, struct observer_list, xalloc_observer_list_node)
(xfree_observer_list_node, generic_observer_attach)
(generic_observer_detach, generic_observer_notify): Remove.
(_initialize_observer): Update.
Don't include observer.inc.
* Makefile.in (generated_files): Remove observer.h, observer.inc.
(clean mostlyclean): Likewise.
(observer.h, observer.inc): Remove targets.
(SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c.
(COMMON_SFILES): Use observable.c, not observer.c.
* .gitignore: Remove observer.h.
gdb/doc/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* observer.texi: Remove.
gdb/testsuite/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* gdb.gdb/observer.exp: Remove.
This patch makes program_space a C++ object by adding a
constructor/destructor, giving default values to fields, and using
new/delete.
gdb/ChangeLog:
* progspace.h (struct program_space): Add constructor and
destructor, initialize fields.
(add_program_space): Remove.
* progspace.c (add_program_space): Rename to...
(program_space::program_space): ... this.
(release_program_space): Rename to...
(program_space::~program_space): ... this.
(delete_program_space): Use delete to delete program_space.
(initialize_progspace): Use new to allocate program_space.
* inferior.c (add_inferior_with_spaces): Likewise.
(clone_inferior_command): Likewise.
* infrun.c (follow_fork_inferior): Likewise.
(handle_vfork_child_exec_or_exit): Likewise.
When we kill an inferior, the inferior is not deleted. What is more, it
is reused when the new process is created, so we need to reset inferior's
state when it exits.
gdb:
2018-02-15 Yao Qi <yao.qi@linaro.org>
PR gdb/22849
* inferior.c (exit_inferior_1): Reset inf->control.
This patch makes these two functions actually use the inferior parameter
added by the previous patch, instead of reading inferior_ptid. I chose
these two, because they are the one actually used when I detach on my
GNU/Linux system, so they were easy to test.
I took the opportunity to pass the inferior being detached to
inf_ptrace_detach_success, so it could use it too. From there, it made
sense to add an overload of detach_inferior that takes the inferior
directly rather than the pid, to avoid having to pass inf->pid only for
the callee to look up the inferior structure by pid.
gdb/ChangeLog:
* inf-ptrace.c (inf_ptrace_detach): Adjust call to
inf_ptrace_detach_success.
(inf_ptrace_detach_success): Add inferior parameter, use it
instead of inferior_ptid, pass it to detach_inferior.
* inf-ptrace.h (inf_ptrace_detach_success): Add inferior
parameter.
* inferior.c (detach_inferior): Add overload that takes an
inferior object.
* inferior.h (detach_inferior): Likewise.
* linux-nat.c (linux_nat_detach): Use the inf parameter, don't
use inferior_ptid, adjust call to inf_ptrace_detach_success.
* linux-thread-db.c (thread_db_detach): Use inf parameter.
There are currently multiple definitions of private_inferior, defined in
remote.c and darwin-nat.h. The patch that poisons XNEW and friends for
non-POD types trips on that, because private_inferior is freed in
~inferior(), where it is an opaque type. Since the compiler can't tell
whether the type is POD, it gives an error. Also, we can't start using
C++ features in these structures (make them non-POD) as long as there
are multiple definitions with the same name. For these reasons, this
patch makes a class hierarchy, with private_inferior being the abstract
base class, and darwin_inferior & remote_inferior inheriting from it.
Destruction is done through the virtual destructor.
I stumbled on some suspicious code in the darwin implementation though.
darwin_check_new_threads does an XCNEW(darwin_thread_t) when it finds a
new thread, allocating a new structure for it (darwin_thread_t is a
typedef for private_thread_info). It then VEC_safe_pushes it in a
vector defined as DEF_VEC_O (a vector of objects). This means that the
structure content gets copied in the vector. The thread_info object is
created with the XCNEW'ed structure as the private thread info, while
the rest of the code works with the instance in the vector. We have
therefore two distinct instances of darwin_thread_t/private_thread_info
for each thread. This is not really a problem in practice, because
thread_info::priv is not used in the darwin code. I still find it weird
and far from ideal, so I tried to fix it by changing the vector to be a
vector of pointers. There should now be a single instance of the
structure for each thread. The deallocation of the
darwin_thread_t/private_thread_info structure is done by the thread_info
destructor.
I am able to build on macOS, but not really test, since the port seems a
bit broken. I am not able to debug reliably on the machine I have
access to, which runs macOS 10.12.6.
gdb/ChangeLog:
* inferior.h (private_inferior): Define structure type, add
virtual pure destructor.
(inferior) <priv>: Change type to unique_ptr.
* inferior.c (private_inferior::~private_inferior): Provide
default implementation.
(inferior::~inferior): Don't free priv field.
(exit_inferior_1): Likewise.
* darwin-nat.h (struct darwin_exception_info): Initialize fields.
(darwin_exception_info): Remove typedef.
(DEF_VEC_O (darwin_thread_t)); Remove.
(private_inferior): Rename to ...
(darwin_private_inferior): ... this, extend private_inferior.
(get_darwin_inferior): New.
<threads>: Change type to std::vector of darwin_thread_t pointers.
* darwin-nat.c (darwin_check_new_threads): Adjust.
(find_inferior_task_it): Adjust.
(darwin_find_thread); Adjust.
(darwin_suspend_inferior): Adjust.
(darwin_resume_inferior): Adjust.
(darwin_find_new_inferior): Adjust.
(darwin_decode_notify_message): Adjust.
(darwin_send_reply): Adjust.
(darwin_resume_inferior_threads): Adjust.
(darwin_suspend_inferior_threads): Adjust.
(darwin_decode_message): Adjust.
(darwin_wait): Adjust.
(darwin_interrupt): Adjust.
(darwin_deallocate_threads): Adjust.
(darwin_mourn_inferior): Adjust, don't free private data.
(darwin_reply_to_all_pending_messages): Adjust.
(darwin_stop_inferior): Adjust.
(darwin_setup_exceptions): Adjust.
(darwin_kill_inferior): Adjust.
(darwin_setup_request_notification): Adjust.
(darwin_attach_pid): Adjust.
(darwin_init_thread_list): Adjust.
(darwin_setup_fake_stop_event): Adjust.
(darwin_attach): Adjust.
(darwin_detach): Adjust.
(darwin_xfer_partial): Adjust.
(set_enable_mach_exceptions): Adjust.
(darwin_pid_to_exec_file): Adjust.
(darwin_get_ada_task_ptid): Adjust.
* darwin-nat-info.c (get_task_from_args): Adjust.
(info_mach_ports_command): Adjust.
(info_mach_region_command): Adjust.
(info_mach_exceptions_command): Adjust.
* remote.c (private_inferior): Rename to ...
(remote_private_inferior): ... this, initialize fields.
(get_remote_inferior); New.
(remote_commit_resume): Use get_remote_inferior.
(check_pending_event_prevents_wildcard_vcont_callback): Likewise.
This introduces gdb_argv, a class wrapping an "argv" pointer; that is,
a pointer to a NULL-terminated array of char*, where both the array
and each non-NULL element in the array are xmalloc'd.
This patch then changes most users of gdb_buildargv to use gdb_argv
instead.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* utils.h (struct gdb_argv_deleter): New.
(gdb_argv): New class.
* utils.c (gdb_argv::reset): New method.
* tracepoint.c (delete_trace_variable_command): Use gdb_argv.
* tracefile.c (tsave_command): Use gdb_argv.
* top.c (new_ui_command): Use gdb_argv.
* symmisc.c (maintenance_print_symbols)
(maintenance_print_msymbols, maintenance_expand_symtabs): Use gdb_argv.
* symfile.c (symbol_file_command, generic_load)
(remove_symbol_file_command): Use gdb_argv.
* stack.c (backtrace_command): Use gdb_argv.
* source.c (add_path, show_substitute_path_command)
(unset_substitute_path_command, set_substitute_path_command):
Use gdb_argv.
* skip.c (skip_command): Use gdb_argv. Use gdb_buildargv.
* ser-mingw.c (pipe_windows_open): Use gdb_argv.
* remote.c (extended_remote_run, remote_put_command)
(remote_get_command, remote_delete_command): Use gdb_argv.
* remote-sim.c (gdbsim_load, gdbsim_create_inferior)
(gdbsim_open): Use gdb_argv.
* python/py-cmd.c (gdbpy_string_to_argv): Use gdb_argv.
* psymtab.c (maintenance_print_psymbols): Use gdb_argv.
* procfs.c (procfs_info_proc): Use gdb_argv.
* interps.c (interpreter_exec_cmd): Use gdb_argv.
* infrun.c (handle_command): Use gdb_argv.
* inferior.c (add_inferior_command, clone_inferior_command):
Use gdb_argv.
* guile/scm-string.c (gdbscm_string_to_argv): Use gdb_argv.
* exec.c (exec_file_command): Use gdb_argv.
* cli/cli-cmds.c (alias_command): Use gdb_argv.
* compile/compile.c (build_argc_argv): Use gdb_argv.
This introduces ui_out_emit_table, similar to the other existing
ui_out RAII classes, and then uses it in a number of places. This
replaces some cleanups.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* tracepoint.c (tvariables_info_1): Use ui_out_emit_table.
(info_static_tracepoint_markers_command): Likewise.
* solib.c (info_sharedlibrary_command): Use ui_out_emit_table.
* skip.c (skip_info): Use ui_out_emit_table.
* progspace.c (print_program_space): Use ui_out_emit_table.
* osdata.c (info_osdata): Use ui_out_emit_table.
* mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions): Use
ui_out_emit_table.
* linux-thread-db.c (info_auto_load_libthread_db): Use
ui_out_emit_table.
* inferior.c (print_inferior): Use ui_out_emit_table.
* gdb_bfd.c (maintenance_info_bfds): Use ui_out_emit_table.
* breakpoint.c (breakpoint_1): Use ui_out_emit_table.
* auto-load.c (auto_load_info_scripts): Use ui_out_emit_table.
* ada-tasks.c (print_ada_task_info): Use ui_out_emit_table.
* ui-out.h (class ui_out_emit_table): New.
As part of the preparation necessary for my upcoming task, I'd like to
propose that we turn gdb_environ into a class. The approach taken
here is simple: the class gdb_environ contains everything that is
needed to manipulate the environment variables. These variables are
stored in an std::vector<char *>, which can be converted to a 'char
**' and passed as argument to functions that need it.
The usage has not changed much. As per Pedro's suggestion, this class
uses a static factory method initialization. This means that when an
instance is created, it is initially empty. When needed, it has to be
initialized using the static method 'from_host_environ'.
As mentioned before, this is a preparation for an upcoming work that I
will be posting in the next few weeks or so. For that work, I'll
probably create another data structure that will contain all the
environment variables that were set by the user using the 'set
environment' command, because I'll need access to them. This will be
much easier with the class-ification of gdb_environ.
As noted, this has been regression-tested with the new version of
environ.exp and no regressions were found.
gdb/ChangeLog:
2017-06-20 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
'unittests/environ-selftests.c'.
(SUBDIR_UNITTESTS_OBS): Add 'environ-selftests.o'.
* charset.c (find_charset_names): Declare object 'iconv_env'.
Update code to use 'iconv_env' object. Remove call to
'free_environ'.
* common/environ.c: Include <utility>.
(make_environ): Delete function.
(free_environ): Delete function.
(gdb_environ::clear): New function.
(gdb_environ::operator=): New function.
(gdb_environ::get): Likewise.
(environ_vector): Delete function.
(set_in_environ): Delete function.
(gdb_environ::set): New function.
(unset_in_environ): Delete function.
(gdb_environ::unset): New function.
(gdb_environ::envp): Likewise.
* common/environ.h: Include <vector>.
(struct gdb_environ): Delete; transform into...
(class gdb_environ): ... this class.
(free_environ): Delete prototype.
(init_environ, get_in_environ, set_in_environ, unset_in_environ,
environ_vector): Likewise.
* infcmd.c (run_command_1): Update code to call
'envp' from 'gdb_environ' class.
(environment_info): Update code to call methods from 'gdb_environ'
class.
(unset_environment_command): Likewise.
(path_info): Likewise.
(path_command): Likewise.
* inferior.c (inferior::~inferior): Delete call to 'free_environ'.
(inferior::inferior): Initialize 'environment' using the host's
information.
* inferior.h: Remove forward declaration of 'struct gdb_environ'.
Include "environ.h".
(class inferior) <environment>: Change type from 'struct
gdb_environ' to 'gdb_environ'.
* mi/mi-cmd-env.c (mi_cmd_env_path): Update code to call
methods from 'gdb_environ' class.
* solib.c (solib_find_1): Likewise
* unittests/environ-selftests.c: New file.
gdb/gdbserver/ChangeLog:
2017-06-20 Sergio Durigan Junior <sergiodj@redhat.com>
* linux-low.c (linux_create_inferior): Adjust code to access the
environment information via 'gdb_environ' class.
* lynx-low.c (lynx_create_inferior): Likewise.
* server.c (our_environ): Make it an instance of 'gdb_environ'.
(get_environ): Return a pointer to 'our_environ'.
(captured_main): Initialize 'our_environ'.
* server.h (get_environ): Adjust prototype.
* spu-low.c (spu_create_inferior): Adjust code to access the
environment information via 'gdb_environ' class.
After all the make_cleanup_restore_current_thread fixing, I thought
I'd convert that and its relatives (which are all cleanups) to RAII
classes.
scoped_restore_current_pspace_and_thread was put in a separate file to
avoid a circular dependency.
Tested on x86-64 Fedora 23, native and gdbserver.
gdb/ChangeLog:
2017-05-04 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add progspace-and-thread.c.
(HFILES_NO_SRCDIR): Add progspace-and-thread.h.
(COMMON_OBS): Add progspace-and-thread.o.
* breakpoint.c: Include "progspace-and-thread.h".
(update_inserted_breakpoint_locations)
(insert_breakpoint_locations, create_longjmp_master_breakpoint):
Use scoped_restore_current_pspace_and_thread.
(create_std_terminate_master_breakpoint): Use
scoped_restore_current_program_space.
(remove_breakpoint): Use scoped_restore_current_pspace_and_thread.
(print_breakpoint_location): Use
scoped_restore_current_program_space.
(bp_loc_is_permanent): Use
scoped_restore_current_pspace_and_thread.
(resolve_sal_pc): Use scoped_restore_current_pspace_and_thread.
(download_tracepoint_locations): Use
scoped_restore_current_pspace_and_thread.
(breakpoint_re_set): Use scoped_restore_current_pspace_and_thread.
* exec.c (exec_close_1): Use scoped_restore_current_program_space.
(enum step_over_calls_kind): Moved from inferior.h.
(class scoped_restore_current_thread): New class.
* gdbthread.h (make_cleanup_restore_current_thread): Delete
declaration.
(scoped_restore_current_thread): New class.
* infcmd.c: Include "common/gdb_optional.h".
(continue_1, proceed_after_attach): Use
scoped_restore_current_thread.
(notice_new_inferior): Use scoped_restore_current_thread.
* inferior.c: Include "progspace-and-thread.h".
(restore_inferior, save_current_inferior): Delete.
(add_inferior_command, clone_inferior_command): Use
scoped_restore_current_pspace_and_thread.
* inferior.h (scoped_restore_current_inferior): New class.
* infrun.c: Include "progspace-and-thread.h" and
"common/gdb_optional.h".
(follow_fork_inferior): Use
scoped_restore_current_pspace_and_thread.
(scoped_restore_exited_inferior): New class.
(handle_vfork_child_exec_or_exit): Use
scoped_restore_exited_inferior,
scoped_restore_current_pspace_and_thread,
scoped_restore_current_thread and scoped_restore.
(fetch_inferior_event): Use scoped_restore_current_thread.
* linespec.c (decode_line_full, decode_line_1): Use
scoped_restore_current_program_space.
* mi/mi-main.c: Include "progspace-and-thread.h".
(exec_continue): Use scoped_restore_current_thread.
(mi_cmd_exec_run): Use scoped_restore_current_pspace_and_thread.
(mi_cmd_trace_frame_collected): Use scoped_restore_current_thread.
* proc-service.c (ps_pglobal_lookup): Use
scoped_restore_current_program_space.
* progspace-and-thread.c: New file.
* progspace-and-thread.h: New file.
* progspace.c (release_program_space, clone_program_space): Use
scoped_restore_current_program_space.
(restore_program_space, save_current_program_space)
(save_current_space_and_thread): Delete.
(switch_to_program_space_and_thread): Moved to
progspace-and-thread.c.
* progspace.h (save_current_program_space)
(save_current_space_and_thread): Delete declarations.
(scoped_restore_current_program_space): New class.
* remote.c (remote_btrace_maybe_reopen): Use
scoped_restore_current_thread.
* symtab.c: Include "progspace-and-thread.h".
(skip_prologue_sal): Use scoped_restore_current_pspace_and_thread.
* thread.c (print_thread_info_1): Use
scoped_restore_current_thread.
(struct current_thread_cleanup): Delete.
(do_restore_current_thread_cleanup)
(restore_current_thread_cleanup_dtor): Rename/convert both to ...
(scoped_restore_current_thread::~scoped_restore_current_thread):
... this new dtor.
(make_cleanup_restore_current_thread): Rename/convert to ...
(scoped_restore_current_thread::scoped_restore_current_thread):
... this new ctor.
(thread_apply_all_command): Use scoped_restore_current_thread.
(thread_apply_command): Use scoped_restore_current_thread.
* tracepoint.c (tdump_command): Use scoped_restore_current_thread.
* varobj.c (value_of_root_1): Use scoped_restore_current_thread.
This patch changes various places to use ui_out_emit_tuple,
eliminating a number of cleanups. This patch only tackles "easy"
cases, which are ones where the cleanups in question were
block-structured and did not involve any changes other than the
obvious replacement.
ChangeLog
2017-04-22 Tom Tromey <tom@tromey.com>
* record-btrace.c (record_btrace_insn_history)
(record_btrace_insn_history_range, record_btrace_call_history)
(record_btrace_call_history_range): Use ui_out_emit_tuple.
* thread.c (do_captured_list_thread_ids, print_thread_info_1): Use
ui_out_emit_tuple.
* stack.c (print_frame_info): Use ui_out_emit_tuple.
* solib.c (info_sharedlibrary_command): Use ui_out_emit_tuple.
* skip.c (skip_info): Use ui_out_emit_tuple.
* remote.c (show_remote_cmd): Use ui_out_emit_tuple.
* progspace.c (print_program_space): Use ui_out_emit_tuple.
* probe.c (info_probes_for_ops): Use ui_out_emit_tuple.
* osdata.c (info_osdata): Use ui_out_emit_tuple.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Use
ui_out_emit_tuple.
* mi/mi-main.c (print_one_inferior, list_available_thread_groups)
(output_register, mi_cmd_data_read_memory)
(mi_cmd_data_read_memory_bytes, mi_load_progress)
(mi_cmd_trace_frame_collected): Use ui_out_emit_tuple.
* mi/mi-cmd-var.c (mi_cmd_var_list_children, varobj_update_one):
Use ui_out_emit_tuple.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_args): Use
ui_out_emit_tuple.
* mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions)
(mi_cmd_info_gdb_mi_command): Use ui_out_emit_tuple.
* linux-thread-db.c (info_auto_load_libthread_db): Use
ui_out_emit_tuple.
* inferior.c (print_inferior): Use ui_out_emit_tuple.
* gdb_bfd.c (print_one_bfd): Use ui_out_emit_tuple.
* disasm.c (do_mixed_source_and_assembly_deprecated)
(do_mixed_source_and_assembly): Use ui_out_emit_tuple.
* cp-abi.c (list_cp_abis): Use ui_out_emit_tuple.
* cli/cli-setshow.c (cmd_show_list): Use ui_out_emit_tuple.
* breakpoint.c (print_one_breakpoint_location)
(print_one_breakpoint): Use ui_out_emit_tuple.
* auto-load.c (print_script, info_auto_load_cmd): Use
ui_out_emit_tuple.
* ada-tasks.c (print_ada_task_info): Use ui_out_emit_tuple.
This patch fixes an internal error exposed by a test that does
something like:
define kill-and-remove
kill inferiors 2
remove-inferiors 2
end
# Start one inferior.
start
# Start another inferior.
add-inferior 2
inferior 2
start
# Kill and remove inferior 1 while inferior 2 is selected.
thread apply 1.1 kill-and-remove
The internal error looks like this:
Thread 1.1 (Thread 0x7ffff7fc2700 (LWP 20677)):
[Switching to inferior 1 [process 20677] (gdb/testsuite/outputs/gdb.threads/threadapply/threadapply)]
[Switching to thread 1.1 (Thread 0x7ffff7fc2700 (LWP 20677))]
#0 main () at src/gdb/testsuite/gdb.threads/threadapply.c:38
38 for (i = 0; i < NUM; i++)
src/gdb/inferior.c:66: internal-error: void set_current_inferior(inferior*): Assertion `inf != NULL' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.threads/threadapply.exp: kill_and_remove_inferior: try kill-and-remove: thread apply 1.1 kill-and-remove (GDB internal error)
There are several problems around this area of the code. One is that
in do_restore_current_thread_cleanup, we do a look up of inferior by
ptid, which can find the wrong inferior if the previously selected
inferior exited and some other inferior was started with a reused pid
(rare, but still...).
The other problem is that the "remove-inferiors" command rejects
attempts to remove the current inferior, but when we get to
"remove-inferiors" in a "thread apply THR remove-inferiors 2" command,
the current inferior is the inferior of thread THR, not the previously
selected inferior, so if the previously selected inferior was inferior
2, that command still manages to wipe it, and then gdb restores the
old selected inferior, which is now a dangling pointer...
So the fix here is:
- Make make_cleanup_restore_current_thread store a pointer to the
previously selected inferior directly, and use it directly instead
of doing ptid look ups.
- Add a refcount to inferiors, very similar to thread_info's refcount,
that is incremented/decremented by
make_cleanup_restore_current_thread, and checked before deleting an
inferior. To avoid duplication, a new refcounted_object type is
added, that both thread_info and inferior inherit from.
gdb/ChangeLog:
2017-04-19 Pedro Alves <palves@redhat.com>
* common/refcounted-object.h: New file.
* gdbthread.h: Include "common/refcounted-object.h".
(thread_info): Inherit from refcounted_object and add comments.
(thread_info::incref, thread_info::decref)
(thread_info::m_refcount): Delete.
(thread_info::deletable): Use the refcounted_object::refcount()
method.
* inferior.c (current_inferior_): Add comment.
(set_current_inferior): Increment/decrement refcounts.
(prune_inferiors, remove_inferior_command): Skip inferiors marked
not-deletable instead of comparing with the current inferior.
(initialize_inferiors): Increment the initial inferior's refcount.
* inferior.h (struct inferior): Forward declare.
Include "common/refcounted-object.h".
(current_inferior, set_current_inferior): Move declaration to
before struct inferior's definition, and fix comment.
(inferior): Inherit from refcounted_object. Add comments.
* thread.c (switch_to_thread_no_regs): Reference the thread's
inferior pointer directly instead of doing a ptid lookup.
(switch_to_no_thread): New function.
(switch_to_thread(thread_info *)): New function, factored out
from ...
(switch_to_thread(ptid_t)): ... this.
(restore_current_thread): Delete.
(current_thread_cleanup): Remove 'inf_id' and 'was_removable'
fields, and add 'inf' field.
(do_restore_current_thread_cleanup): Check whether old->inf is
alive instead of looking up an inferior by ptid. Use
switch_to_thread and switch_to_no_thread.
(restore_current_thread_cleanup_dtor): Use old->inf directly
instead of lookup up an inferior by id. Decref the inferior.
Don't restore 'removable'.
(make_cleanup_restore_current_thread): Same the inferior pointer
in old, instead of the inferior number. Incref the inferior.
Don't save/clear 'removable'.
gdb/testsuite/ChangeLog:
2017-04-19 Pedro Alves <palves@redhat.com>
* gdb.threads/threadapply.exp (kill_and_remove_inferior): New
procedure.
(top level): Call it.
* lib/gdb.exp (gdb_define_cmd): New procedure.
struct inferior became a non-POD when enum_flags was made a non-POD,
so we should be allocating/destroying inferiors with new/delete, etc.
That's what this commit does.
Note: this commit makes all boolean fields of inferior be "bool",
except the "detaching" field. That'll require more work, so I split
it to a separate patch.
gdb/ChangeLog:
2017-04-13 Pedro Alves <palves@redhat.com>
* inferior.c (free_inferior): Convert to ...
(inferior::~inferior): ... this dtor.
(inferior::inferior): New ctor, factored out from ...
(add_inferior_silent): ... here. Allocate the inferior with a new
expression.
(delete_inferior): Call delete instead of free_inferior.
* inferior.h (gdb_environ, continuation): Forward declare.
(inferior): Now a class. Add in-class initialization to all
members. Make boolean fields bool, except 'detaching'.
(inferior::inferior): New explicit ctor.
(inferior::~inferior): New.
Not used anywhere. This was actually never used. It came in because
I originally created inferior.c by copying thread.c, and doing
s/thread/inferior/g, and missed that nothing needs this. :-)
gdb/ChangeLog:
2017-04-13 Pedro Alves <palves@redhat.com>
* inferior.c (init_inferior_list): Delete.
* inferior.h (init_inferior_list): Delete.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
In the case where we switch to a non-running inferior, we do a
"find_inferior_id (num)", although we did the same call right before.
gdb/ChangeLog:
* inferior.c (inferior_command): Remove duplicate
find_inferior_id call.
The following testcases make GDB crash whenever an invalid sysroot is
provided, when GDB is unable to find a valid path to the symbol file:
gdb.base/catch-syscall.exp
gdb.base/execl-update-breakpoints.exp
gdb.base/foll-exec-mode.exp
gdb.base/foll-exec.exp
gdb.base/foll-vfork.exp
gdb.base/pie-execl.exp
gdb.multi/bkpt-multi-exec.exp
gdb.python/py-finish-breakpoint.exp
gdb.threads/execl.exp
gdb.threads/non-ldr-exc-1.exp
gdb.threads/non-ldr-exc-2.exp
gdb.threads/non-ldr-exc-3.exp
gdb.threads/non-ldr-exc-4.exp
gdb.threads/thread-execl.exp
The immediate cause of the segv is that follow_exec is passing a NULL
argument (the result of exec_file_find) to strlen.
However, the problem is deeper than that: follow_exec simply isn't
prepared for the case where sysroot translation fails to locate the
new executable. Actually all callers of exec_file_find have bugs due
to confusion between host and target pathnames. This commit attempts
to fix all that.
In terms of the testcases that were formerly segv'ing, GDB now prints
a warning but continues execution of the new program, so that the
tests now mostly FAIL instead. You could argue the FAILs are due to a
legitimate problem with the test environment setting up the sysroot
translation incorrectly.
A new representative test is added which exercises the ne wwarning
code path even with native testing.
Tested on x86_64 Fedora 23, native and gdbserver.
gdb/ChangeLog:
2016-10-25 Sandra Loosemore <sandra@codesourcery.com>
Luis Machado <lgustavo@codesourcery.com>
Pedro Alves <palves@redhat.com>
PR gdb/20569
* exceptions.c (exception_print_same): Moved here from exec.c.
* exceptions.h (exception_print_same): Declare.
* exec.h: Include "symfile-add-flags.h".
(try_open_exec_file): New declaration.
* exec.c (exception_print_same): Moved to exceptions.c.
(try_open_exec_file): New function.
(exec_file_locate_attach): Rename exec_file and full_exec_path
variables to avoid confusion between target and host pathnames.
Move pathname processing logic to exec_file_find. Do not return
early if pathname lookup fails; Call try_open_exec_file.
* infrun.c (follow_exec): Split and rename execd_pathname variable
to avoid confusion between target and host pathnames. Warn if
pathname lookup fails. Pass target pathname to
target_follow_exec, not hostpathname. Call try_open_exec_file.
* main.c (symbol_file_add_main_adapter): New function.
(captured_main_1): Use it.
* solib-svr4.c (open_symbol_file_object): Adjust to pass
symfile_add_flags to symbol_file_add_main.
* solib.c (exec_file_find): Incorporate fallback logic for relative
pathnames formerly in exec_file_locate_attach.
* symfile.c (symbol_file_add_main, symbol_file_add_main_1):
Replace 'from_tty' parameter with a symfile_add_file.
(symbol_file_command): Adjust to pass symfile_add_flags to
symbol_file_add_main.
* symfile.h (symbol_file_add_main): Replace 'from_tty' parameter
with a symfile_add_file.
gdb/testsuite/ChangeLog:
2016-10-25 Luis Machado <lgustavo@codesourcery.com>
* gdb.base/exec-invalid-sysroot.exp: New file.
(Where "exits" includes being killed or detached.)
Nothing is clearing inferior->priv currently. This is a problem if we
change the inferior's process_stratum targets in a single debug
session. This field is currently only used by darwin-nat.c, but a
follow up patch will make remote.c use it too. Without the fix,
remote.c might end up mistaking the priv object allocated by
darwin-nat.c with its own.
(Found by inspection.)
gdb/ChangeLog:
2016-10-26 Pedro Alves <palves@redhat.com>
* inferior.c (exit_inferior_1): Free 'priv'.
This converts tid_range_parser and get_number_or_range to be classes.
The various tid_range_parser_* and get_number_or_range_* functions
become methods on the respective classes. Then it updates the users
to follow.
The rationale for the change is that this provides better
encapsulation. For example, this forced me to think of a better
interface between tid_range_parser and get_number_or_range, since the
former peeked into the latter's internals a bit too much. That ended
up resulting mostly in these two not-just-straight-1-1 changes:
void
-tid_range_parser_skip (struct tid_range_parser *parser)
+tid_range_parser::skip_range ()
{
...
- tid_range_parser_init (parser, parser->range_parser.end_ptr,
- parser->default_inferior);
+ m_range_parser.skip_range ();
+ init (m_range_parser.string (), m_default_inferior);
}
and:
/* If we successfully parsed a thread number or finished parsing a
thread range, switch back to assuming the next TID is
inferior-qualified. */
- if (parser->range_parser.end_ptr == NULL
- || parser->range_parser.string == parser->range_parser.end_ptr)
+ if (!m_range_parser.in_range ())
{
For the same reason (encapsulation), this moves the enum
tid_range_state definition to within the tid_parser class's scope,
since that is private implementation detail.
While at it, switch to use "bool" for booleans.
gdb/ChangeLog:
2016-10-13 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* tid-parse.h (tid_range_parser): New class.
(enum tid_range_state): Move into tid_range_parser's scope.
Remove TID_RANGE_ prefix from all values.
(tid_range_parser_get_tid, tid_range_parser_get_tid_range)
(tid_range_parser_star_range, tid_range_parser_finished)
(tid_range_parser_skip, tid_range_parser_qualified): Don't
declare.
(tid_is_in_list): Update comment.
* tid-parse.c (tid_range_parser::tid_range_parser): New.
(init, finished, get_string, skip, tid_is_qualified)
(get_tid_or_range, get_tid_range, get_tid, star_range): Rename;
turn into methods.
(tid_is_in_list): Adjust.
* cli/cli-utils.h (number_or_range_parser): New class.
(init_number_or_range, get_number_or_range)
(number_range_setup_range): Don't declare.
* cli/cli-utils.c
(number_or_range_parser::number_or_range_parser): New.
(init_number_or_range, get_number_or_range)
(number_range_setup_range): Rename; turn into methods.
(number_is_in_list): Adjust.
* breakpoint.c (map_breakpoint_numbers): Adjust. Use bool.
(trace_pass_command, get_tracepoint_by_number): Adjust.
* breakpoint.h (get_tracepoint_by_number): Adjust.
* inferior.c (detach_inferior_command, kill_inferior_command)
(remove_inferior_command): Adjust.
* linespec.c (decode_line_2): Adjust.
* memattr.c (mem_enable_command, mem_disable_command)
(mem_delete_command): Adjust.
* printcmd.c (map_display_numbers): Adjust.
* reverse.c (delete_bookmark_command, bookmarks_info): Adjust.
* thread.c (thread_apply_command): Adjust.
With this patch, when an inferior, thread or frame is explicitly
selected by the user, notifications will appear on all CLI and MI UIs.
When a GDB console is integrated in a front-end, this allows the
front-end to follow a selection made by the user ont he CLI, and it
informs the user about selection changes made behind the scenes by the
front-end.
This patch addresses PR gdb/20487.
In order to communicate frame changes to the front-end, this patch adds
a new field to the =thread-selected event for the selected frame. The
idea is that since inferior/thread/frame can be seen as a composition,
it makes sense to send them together in the same event. The vision
would be to eventually send the inferior information as well, if we find
that it's needed, although the "=thread-selected" event would be
ill-named for that job.
Front-ends need to handle this new field if they want to follow the
frame selection changes that originate from the console. The format of
the frame attribute is the same as what is found in the *stopped events.
Here's a detailed example for each command and the events they generate:
thread
------
1. CLI command:
thread 1.3
MI event:
=thread-selected,id="3",frame={...}
2. MI command:
-thread-select 3
CLI event:
[Switching to thread 1.3 ...]
3. MI command (CLI-in-MI):
thread 1.3
MI event/reply:
&"thread 1.3\n"
~"#0 child_sub_function () ...
=thread-selected,id="3",frame={level="0",...}
^done
frame
-----
1. CLI command:
frame 1
MI event:
=thread-selected,id="3",frame={level="1",...}
2. MI command:
-stack-select-frame 1
CLI event:
#1 0x00000000004007f0 in child_function...
3. MI command (CLI-in-MI):
frame 1
MI event/reply:
&"frame 1\n"
~"#1 0x00000000004007f9 in ..."
=thread-selected,id="3",frame={level="1"...}
^done
inferior
--------
Inferior selection events only go from the console to MI, since there's
no way to select the inferior in pure MI.
1. CLI command:
inferior 2
MI event:
=thread-selected,id="3"
Note that if the user selects an inferior that is not started or exited,
the MI doesn't receive a notification. Since there is no threads to
select, the =thread-selected event does not apply...
2. MI command (CLI-in-MI):
inferior 2
MI event/reply:
&"inferior 2\n"
~"[Switching to inferior 2 ...]"
=thread-selected,id="4",frame={level="0"...}
^done
Internal implementation detail: this patch makes it possible to suppress
notifications caused by a CLI command, like what is done in mi-interp.c.
This means that it's now possible to use the
add_com_suppress_notification function to register a command with some
event suppressed. It is used to implement the select-frame command in
this patch.
The function command_notifies_uscc_observer was added to extract
the rather complicated logical expression from the if statement. It is
also now clearer what that logic does: if the command used by the user
already notifies the user_selected_context_changed observer, there is
not need to notify it again. It therefore protects again emitting the
event twice.
No regressions, tested on ubuntu 14.04 x86 with target boards unix and
native-extended-gdbserver.
gdb/ChangeLog:
YYYY-MM-DD Antoine Tremblay <antoine.tremblay@ericsson.com>
YYYY-MM-DD Simon Marchi <simon.marchi@ericsson.com>
PR gdb/20487
* NEWS: Mention new frame field of =thread-selected event.
* cli/cli-decode.c (add_cmd): Initialize c->suppress_notification.
(add_com_suppress_notification): New function definition.
(cmd_func): Set and restore the suppress_notification flag.
* cli/cli-deicode.h (struct cmd_list_element)
<suppress_notification>: New field.
* cli/cli-interp.c (cli_suppress_notification): New global variable.
(cli_on_user_selected_context_changed): New function.
(_initialize_cli_interp): Attach to user_selected_context_changed
observer.
* command.h (struct cli_suppress_notification): New structure.
(cli_suppress_notification): New global variable declaration.
(add_com_suppress_notification): New function declaration.
* defs.h (enum user_selected_what_flag): New enum.
(user_selected_what): New enum flag type.
* frame.h (print_stack_frame_to_uiout): New function declaration.
* gdbthread.h (print_selected_thread_frame): New function declaration.
* inferior.c (print_selected_inferior): New function definition.
(inferior_command): Remove printing of inferior/thread/frame switch
notifications, notify user_selected_context_changed observer.
* inferior.h (print_selected_inferior): New function declaration.
* mi/mi-cmds.c (struct mi_cmd): Add user_selected_context
suppression to stack-select-frame and thread-select commands.
* mi/mi-interp.c (struct mi_suppress_notification)
<user_selected_context>: Initialize.
(mi_user_selected_context_changed): New function definition.
(_initialize_mi_interp): Attach to user_selected_context_changed.
* mi/mi-main.c (mi_cmd_thread_select): Print thread selection reply.
(mi_execute_command): Handle notification suppression. Notify
user_selected_context_changed observer on thread change instead of printing
event directly. Don't send it if command already sends the notification.
(command_notifies_uscc_observer): New function.
(mi_cmd_execute): Don't handle notification suppression.
* mi/mi-main.h (struct mi_suppress_notification)
<user_selected_context>: New field.
* stack.c (print_stack_frame_to_uiout): New function definition.
(select_frame_command): Notify user_selected_context_changed
observer.
(frame_command): Call print_selected_thread_frame if there's no frame
change or notify user_selected_context_changed observer if there is.
(up_command): Notify user_selected_context_changed observer.
(down_command): Likewise.
(_initialize_stack): Suppress user_selected_context notification for
command select-frame.
* thread.c (thread_command): Notify
user_selected_context_changed if the thread has changed, print
thread info directly if it hasn't.
(do_captured_thread_select): Do not print thread switch event.
(print_selected_thread_frame): New function definition.
* tui/tui-interp.c (tui_on_user_selected_context_changed):
New function definition.
(_initialize_tui_interp): Attach to user_selected_context_changed
observer.
gdb/doc/ChangeLog:
PR gdb/20487
* gdb.texinfo (Context management): Update mention of frame
change notifications.
(gdb/mi Async Records): Document frame field in
=thread-select event.
* observer.texi (GDB Observers): New user_selected_context_changed
observer.
gdb/testsuite/ChangeLog:
PR gdb/20487
* gdb.mi/mi-pthreads.exp (check_mi_thread_command_set): Adapt
=thread-select-event check.
This error message should not contain the word symbol:
(gdb) remove-inferiors 1
Warning: Can not remove current symbol inferior 1.
gdb/ChangeLog:
* inferior.c (remove_inferior_command): Fix error message.
gdb/testsuite/ChangeLog:
* gdb.multi/remove-inferiors.exp (test_remove_inferiors): Fix
expected error message.
Add a new function to print a thread ID, in the style of paddress,
plongest, etc. and adjust all CLI-reachable paths to use it.
This gives us a single place to tweak to print inferior-qualified
thread IDs later:
- [Switching to thread 1 (Thread 0x7ffff7fc2740 (LWP 8155))]
+ [Switching to thread 1.1 (Thread 0x7ffff7fc2740 (LWP 8155))]
etc., though for now, this has no user-visible change.
No regressions on x86_64 Fedora 20.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* breakpoint.c (remove_threaded_breakpoints)
(print_one_breakpoint_location): Use print_thread_id.
* btrace.c (btrace_enable, btrace_disable, btrace_teardown)
(btrace_fetch, btrace_clear): Use print_thread_id.
* common/print-utils.c (CELLSIZE): Delete.
(get_cell): Rename to ...
(get_print_cell): ... this and made extern. Adjust call callers.
Adjust to use PRINT_CELL_SIZE.
* common/print-utils.h (get_print_cell): Declare.
(PRINT_CELL_SIZE): New.
* gdbthread.h (print_thread_id): Declare.
* infcmd.c (signal_command): Use print_thread_id.
* inferior.c (print_inferior): Use print_thread_id.
* infrun.c (handle_signal_stop)
(insert_exception_resume_breakpoint)
(insert_exception_resume_from_probe)
(print_signal_received_reason): Use print_thread_id.
* record-btrace.c (record_btrace_info)
(record_btrace_resume_thread, record_btrace_cancel_resume)
(record_btrace_step_thread, record_btrace_wait): Use
print_thread_id.
* thread.c (thread_apply_all_command): Use print_thread_id.
(print_thread_id): New function.
(thread_apply_command): Use print_thread_id.
(thread_command, thread_find_command, do_captured_thread_select):
Use print_thread_id.
[This reapplies a change that was accidentally reverted with c0ecb95f3d.]
Before:
(gdb) info threads
Id Target Id Frame
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
After:
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
gdb/doc/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.texinfo (Inferiors and Programs): Adjust "maint info
program-spaces" example to ascending order listing.
(Threads): Adjust "info threads" example to ascending order
listing.
(Forks): Adjust "info inferiors" example to ascending order
listing.
gdb/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* inferior.c (add_inferior_silent): Append the new inferior to the
end of the list.
* progspace.c (add_program_space): Append the new pspace to the
end of the list.
* thread.c (new_thread): Append the new thread to the end of the
list.
gdb/testsuite/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.base/foll-exec-mode.exp: Adjust to GDB listing inferiors and
threads in ascending order.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/multi-forks.exp: Likewise.
* gdb.mi/mi-nonstop.exp: Likewise.
* gdb.mi/mi-nsintrall.exp: Likewise.
* gdb.multi/base.exp: Likewise.
* gdb.multi/multi-arch.exp: Likewise.
* gdb.python/py-inferior.exp: Likewise.
* gdb.threads/break-while-running.exp: Likewise.
* gdb.threads/execl.exp: Likewise.
* gdb.threads/gcore-thread.exp: Likewise.
* gdb.threads/info-threads-cur-sal.exp: Likewise.
* gdb.threads/kill.exp: Likewise.
* gdb.threads/linux-dp.exp: Likewise.
* gdb.threads/multiple-step-overs.exp: Likewise.
* gdb.threads/next-bp-other-thread.exp: Likewise.
* gdb.threads/step-bg-decr-pc-switch-thread.exp: Likewise.
* gdb.threads/step-over-lands-on-breakpoint.exp: Likewise.
* gdb.threads/step-over-trips-on-watchpoint.exp: Likewise.
* gdb.threads/thread-find.exp: Likewise.
* gdb.threads/tls.exp: Likewise.
* lib/mi-support.exp (mi_reverse_list): Delete.
(mi_check_thread_states): No longer reverse list.
I was getting
gu (print arg0)^M
= 0x7fffffffdafb
"/unsafebuild-x86_64-redhat-linux-gnu/gdb/testsuite.unix.-m64/outputs/gdb.guile/scm-value/scm-"...^M
(gdb) FAIL: gdb.guile/scm-value.exp: verify dereferenced value
python print (arg0)^M
0x7fffffffdafd
"/unsafebuild-x86_64-redhat-linux-gnu/gdb/testsuite.unix.-m64/outputs/gdb.python/py-value/py-v"...^M
(gdb) FAIL: gdb.python/py-value.exp: verify dereferenced value
and also:
(gdb) p argv[0]^M
$2 = 0x7fffffffd832 "/home/jkratoch/redhat/gdb-test-", 'x' <repeats 169
times>...^M
(gdb) FAIL: gdb.guile/scm-value.exp: argv[0] should be available on this
target
gdb/testsuite/ChangeLog
2016-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.guile/scm-value.exp (test_value_in_inferior): Set print elements
and repeats to unlimited.
* gdb.python/py-value.exp: Likewise.
* lib/gdb.exp (gdb_has_argv0): Save and temporarily set print elements
and repeats to unlimited.
This patch implements support for fork and exec events with target remote
mode Linux targets. For such targets with Linux kernels 2.5.46 and later,
this enables follow-fork-mode, detach-on-fork and fork and exec
catchpoints.
The changes required to implement this included:
* Don't exit from gdbserver if there are still active inferiors.
* Allow changing the active process in remote mode.
* Enable fork and exec events in remote mode.
* Print "Ending remote debugging" only when disconnecting.
* Combine remote_kill and extended_remote_kill into a single function
that can handle the multiple inferior case for target remote. Also,
the same thing for remote_mourn and extended_remote_mourn.
* Enable process-style ptids in target remote.
* Remove restriction on multiprocess mode in target remote.
gdb/gdbserver/ChangeLog:
* server.c (process_serial_event): Don't exit from gdbserver
in remote mode if there are still active inferiors.
gdb/ChangeLog:
* inferior.c (number_of_live_inferiors): New function.
(have_live_inferiors): Use number_of_live_inferiors in place
of duplicate code.
* inferior.h (number_of_live_inferiors): Declare new function.
* remote.c (set_general_process): Remove restriction on target
remote mode.
(remote_query_supported): Likewise.
(remote_detach_1): Exit in target remote mode only when there
is just one live inferior left.
(remote_disconnect): Unpush the target directly instead of
calling remote_mourn.
(remote_kill): Rewrite function to handle both target remote
and extended-remote. Call remote_kill_k.
(remote_kill_k): New function.
(extended_remote_kill): Delete function.
(remote_mourn, extended_remote_mourn): Combine functions into
one, remote_mourn, and enable extended functionality for target
remote.
(remote_pid_to_str): Enable "process" style ptid string for
target remote.
(remote_supports_multi_process): Remove restriction on target
remote mode.
Before:
(gdb) info threads
Id Target Id Frame
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
After:
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
gdb/doc/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.texinfo (Inferiors and Programs): Adjust "maint info
program-spaces" example to ascending order listing.
(Threads): Adjust "info threads" example to ascending order
listing.
(Forks): Adjust "info inferiors" example to ascending order
listing.
gdb/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* inferior.c (add_inferior_silent): Append the new inferior to the
end of the list.
* progspace.c (add_program_space): Append the new pspace to the
end of the list.
* thread.c (new_thread): Append the new thread to the end of the
list.
gdb/testsuite/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.base/foll-exec-mode.exp: Adjust to GDB listing inferiors and
threads in ascending order.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/multi-forks.exp: Likewise.
* gdb.mi/mi-nonstop.exp: Likewise.
* gdb.mi/mi-nsintrall.exp: Likewise.
* gdb.multi/base.exp: Likewise.
* gdb.multi/multi-arch.exp: Likewise.
* gdb.python/py-inferior.exp: Likewise.
* gdb.threads/break-while-running.exp: Likewise.
* gdb.threads/execl.exp: Likewise.
* gdb.threads/gcore-thread.exp: Likewise.
* gdb.threads/info-threads-cur-sal.exp: Likewise.
* gdb.threads/kill.exp: Likewise.
* gdb.threads/linux-dp.exp: Likewise.
* gdb.threads/multiple-step-overs.exp: Likewise.
* gdb.threads/next-bp-other-thread.exp: Likewise.
* gdb.threads/step-bg-decr-pc-switch-thread.exp: Likewise.
* gdb.threads/step-over-lands-on-breakpoint.exp: Likewise.
* gdb.threads/step-over-trips-on-watchpoint.exp: Likewise.
* gdb.threads/thread-find.exp: Likewise.
* gdb.threads/tls.exp: Likewise.
* lib/mi-support.exp (mi_reverse_list): Delete.
(mi_check_thread_states): No longer reverse list.
Invoking either of the above commands on an inferior that's not running
triggers the following assert failure:
.../binutils-gdb/gdb/thread.c:514: internal-error: any_thread_of_process: Assertion `pid != 0' failed.
The fix is straightforward. This patch also adds a test to check the
basic functionality of these commands, along with testing this fix in
particular. Tested on x86_64 Linux.
gdb/ChangeLog:
* inferior.c (detach_inferior_command): Don't call
any_thread_of_process when pid is 0.
(kill_inferior_command): Likewise.
gdb/testsuite/ChangeLog:
* gdb.base/kill-detach-inferiors-cmd.exp: New test file.
* gdb.base/kill-detach-inferiors-cmd.c: New test file.
When deleting an inferior, delete the associated program space as well
if it becomes unused. This replaces the "pruning" approach, with which
you could forget to call prune_program_spaces (as seen, with the
-remove-inferior command, see [1]).
This allows to remove the prune_program_spaces function. At the same
time, I was able to clean up the delete_inferior* family:
- delete_inferior is unused
- delete_inferior_silent is only used in monitor_close, but is replaced
with discard_all_inferiors [2], so it becomes unused
- All remaining calls to delete_inferior_1 are with silent=1, so the
parameter is removed
- delete_inferior_1 is renamed to delete_inferior
I renamed pspace_empty_p to program_space_empty_p. I prefer if the
"exported" functions have a more explicit and standard name.
Tested on Ubuntu 14.10.
[1] https://sourceware.org/ml/gdb-patches/2014-09/msg00717.html
[2] See https://sourceware.org/ml/gdb-patches/2015-07/msg00228.html and
follow-ups for details.
gdb/Changelog:
* inferior.c (delete_inferior_1): Rename to ...
(delete_inferior): ..., remove 'silent' parameter, delete
program space when unused and remove call to prune_program_spaces.
Remove the old, unused, delete_inferior.
(delete_inferior_silent): Remove.
(prune_inferiors): Change call from delete_inferior_1 to
delete_inferior and remove 'silent' parameter. Remove call to
prune_program_spaces.
(remove_inferior_command): Idem.
* inferior.h (delete_inferior_1): Rename to...
(delete_inferior): ..., remove 'silent' parameter and remove the
original delete_inferior.
(delete_inferior_silent): Remove.
* mi/mi-main.c (mi_cmd_remove_inferior): Change call from
delete_inferior_1 to delete_inferior and remove 'silent'
parameter.
* progspace.c (prune_program_spaces): Remove.
(pspace_empty_p): Rename to...
(program_space_empty_p): ... and make non-static.
(delete_program_space): New.
* progspace.h (prune_program_spaces): Remove declaration.
(program_space_empty_p): New declaration.
(delete_program_space): New declaration.
* monitor.c (monitor_close): Replace call to
delete_thread_silent and delete_inferior_silent with
discard_all_inferiors.
When deleting an inferior, delete the associated program space as well
if it becomes unused. This replaces the "pruning" approach, with which
you could forget to call prune_program_spaces (as seen, with the
-remove-inferior command, see [1]).
This allows to remove the prune_program_spaces function. At the same
time, I was able to clean up the delete_inferior* family.
delete_inferior_silent and delete_inferior were unused, which allowed
renaming delete_inferior_1 to delete_inferior. Also, since all calls to
it were with silent=1, I removed that parameter completely.
I renamed pspace_empty_p to program_space_empty_p. I prefer if the
"exported" functions have a more explicit and standard name.
Tested on Ubuntu 14.10.
This obsoletes my previous patch "Add call to prune_program_spaces in
mi_cmd_remove_inferior" [1].
[1] https://sourceware.org/ml/gdb-patches/2014-09/msg00717.html
gdb/Changelog:
* inferior.c (delete_inferior_1): Rename to ...
(delete_inferior): ..., remove 'silent' parameter, delete
program space when unused and remove call to prune_program_spaces.
Remove the old, unused, delete_inferior.
(delete_inferior_silent): Remove.
(prune_inferiors): Change call from delete_inferior_1 to
delete_inferior and remove 'silent' parameter. Remove call to
prune_program_spaces.
(remove_inferior_command): Idem.
* inferior.h (delete_inferior_1): Rename to...
(delete_inferior): ..., remove 'silent' parameter and remove the
original delete_inferior.
(delete_inferior_silent): Remove.
* mi/mi-main.c (mi_cmd_remove_inferior): Change call from
delete_inferior_1 to delete_inferior and remove 'silent'
parameter.
* progspace.c (prune_program_spaces): Remove.
(pspace_empty_p): Rename to...
(program_space_empty_p): ... and make non-static.
(delete_program_space): New.
* progspace.h (prune_program_spaces): Remove declaration.
(program_space_empty_p): New declaration.
(delete_program_space): New declaration.
I sent a patch in 2013 for this (incorrectly named =thread-created):
https://cygwin.com/ml/gdb-patches/2013-06/msg00129.html
Tom Tromey was ok with the change, but suggested to add a test as well.
Then I forgot about this patch until today. So here it is again, with the
corresponding test.
The problem is that the =thread-exited event does not appear when detaching
from a local process. It does appear with remote though. It's not a really
big deal, but I'd like it to be consistent.
Tested with local and remote Linux on my Ubuntu 14.04.
gdb/ChangeLog:
PR gdb/15564
* inferior.c (detach_inferior): Call exit_inferior_1 with silent = 0.
gdb/testsuite/ChangeLog:
PR gdb/15564
* gdb.mi/mi-detach.exp: New file.
This patch renames symbols that happen to have names which are
reserved keywords in C++.
Most of this was generated with Tromey's cxx-conversion.el script.
Some places where later hand massaged a bit, to fix formatting, etc.
And this was rebased several times meanwhile, along with re-running
the script, so re-running the script from scratch probably does not
result in the exact same output. I don't think that matters anyway.
gdb/
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
Rename symbols whose names are reserved C++ keywords throughout.
gdb/gdbserver/
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
Rename symbols whose names are reserved C++ keywords throughout.
This patch introduces find_inferior_ptid to replace the common idiom
find_inferior_pid (ptid_get_pid (...));
It replaces all the instances of that idiom that I found with the new
function.
No significant changes before/after the patch in the regression suite
on amd64 linux.
gdb/ChangeLog:
* inferior.c (find_inferior_ptid): New function.
* inferior.h (find_inferior_ptid): New declaration.
* ada-tasks.c (ada_get_task_number): Use find_inferior_ptid.
* corelow.c (core_pid_to_str): Same.
* darwin-nat.c (darwin_resume): Same.
* infrun.c (fetch_inferior_event): Same.
(get_inferior_stop_soon): Same.
(handle_inferior_event): Same.
(handle_signal_stop): Same.
* linux-nat.c (resume_lwp): Same.
(stop_wait_callback): Same.
* mi/mi-interp.c (mi_new_thread): Same.
(mi_thread_exit): Same.
* proc-service.c (ps_pglobal_lookup): Same.
* record-btrace.c (record_btrace_step_thread): Same.
* remote-sim.c (gdbsim_close_inferior): Same.
(gdbsim_resume): Same.
(gdbsim_stop): Same.
* sol2-tdep.c (sol2_core_pid_to_str): Same.
* target.c (memory_xfer_partial_1): Same.
(default_thread_address_space): Same.
* thread.c (thread_change_ptid): Same.
(switch_to_thread): Same.
(do_restore_current_thread_cleanup): Same.
A patch I wrote made GDB pull the thread list sooner when debugging
with target remote, and I noticed an intended consequence. GDB
started bouncing around the currently selected remote/general thread
more frequently. E.g.:
Sending packet: $qTMinFTPILen#3b...Packet received: 5
+Sending packet: $Hgp726d.726d#53...Packet received: OK
Sending packet: $m400680,40#2f...Packet received: 85c0741455bff00d60004889e5ffd05de97bffffff0f1f00e973ffffff0f1f00554889e5c745fc00000000c745fc01000000e900000000c745fc02000000b800
+Sending packet: $Hgp726d.7278#28...Packet received: OK
Sending packet: $m4006b2,1#28...Packet received: e9
Fast tracepoint 2 at 0x4006b2: file gdb/testsuite/gdb.trace/range-stepping.c, line 53.
Sending packet: $qTStatus#49...Packet received: T0;tnotrun:0;tframes:0;tcreated:0;tfree:500000;tsize:500000;circular:0;disconn:0;starttime:0;stoptime:0;username:;notes::
This ended up breaking "tstart" when one has fast tracepoints set,
because gdbserver isn't expecting an Hg packet in response to
qRelocInsn:
(gdb) ftrace *set_point
Fast tracepoint 3 at 0x4006b2: file gdb/testsuite/gdb.trace/range-stepping.c, line 53.
(gdb) PASS: gdb.trace/range-stepping.exp: ftrace: ftrace *set_point
tstart
gdbserver: Malformed response to qRelocInsn, ignoring: Hgp2783.2783
Target does not support this command.
(gdb) FAIL: gdb.trace/range-stepping.exp: ftrace: tstart
remote_trace_start should probably start by making sure the remote
current thread matches inferior_ptid (calling set_general_thread), but
still, reducing unnecessary bouncing is a good idea. It happens
because the memory/symbol/breakpoint routines use
switch_to_program_space_and_thread to do something in the right
context and then revert back to the previously current thread.
The fix is to simply make any_thread_of_process,
find_inferior_for_program_space, etc. give preference to the current
thread/inferior it if matches.
gdb/
2014-10-02 Pedro Alves <palves@redhat.com>
* gdbthread.h (any_thread_of_process, any_live_thread_of_process):
Adjust comments.
* inferior.c (find_inferior_for_program_space): Give preference to
the current inferior.
* inferior.h (find_inferior_for_program_space): Update comment.
* progspace.c (switch_to_program_space_and_thread): Prefer the
current inferior if it's bound to the program space requested. If
the inferior found doesn't have a PID yet, don't bother looking up
a thread.
* progspace.h (switch_to_program_space_and_thread): Adjust
comment.
* thread.c (any_thread_of_process, any_live_thread_of_process):
Give preference to the current thread.
Don't reset the exit code at inferior exit and print it in
-list-thread-groups.
gdb/ChangeLog:
* NEWS: Announce new exit-code field in -list-thread-groups
output.
* inferior.c (exit_inferior_1): Don't clear exit code.
(inferior_appeared): Clear exit code.
* mi/mi-main.c (print_one_inferior): Add printing of the exit
code.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-exit-code.exp: New file.
* gdb.mi/mi-exit-code.c: New file.
gdb/doc/ChangeLog:
* gdb.texinfo (Miscellaneous gdb/mi Commands): Document new
exit-code field in -list-thread-groups output.
Sergio Durigan Junior