I noticed this:
(gdb) apropos per-command
maintenance set per-command -- Per-command statistics settings
set per-command space -- Set whether to display per-command space usage
set per-command symtab -- Set whether to display per-command symtab statistics
set per-command time -- Set whether to display per-command execution time
maintenance show per-command -- Show per-command statistics settings
show per-command space -- Show whether to display per-command space usage
show per-command symtab -- Show whether to display per-command symtab statistics
show per-command time -- Show whether to display per-command execution time
The subcommands of "maintenance set per-command" are missing the
maintenance keyword. This is because that command is registered with
the wrong prefix. This patch fixes that.
gdb/ChangeLog:
* maint.c (_initialize_maint_cmds): Fix prefix of maint set/show
per-command.
We don't build GDB selftests bits when $development is false. However, if
we turn bfd/development.sh:$development to false, common/selftest.c is
compiled which is not expected. It causes the build failure,
selftest.o: In function `selftests::run_tests(char const*)':
binutils-gdb/gdb/common/selftest.c:97: undefined reference to `selftests::reset()'
collect2: error: ld returned 1 exit status
I fix this issue by putting selftest.o selftest-arch.o into CONFIG_OBS
only when $development is true. After this is fixed, there are other
build failures in maint.c, this patch fixes them as well.
In the release mode, the output of these commands are:
(gdb) maintenance selftest
Selftests are not available in a non-development build.
(gdb) maintenance selftest foo
Selftests are not available in a non-development build.
(gdb) maintenance info selftests
Selftests are not available in a non-development build.
gdb:
2018-01-08 Yao Qi <yao.qi@linaro.org>
Simon Marchi <simon.marchi@ericsson.com>
* Makefile.in (COMMON_SFILES): Remove selftest-arch.c and
common/selftest.c.
(COMMON_OBS): Remove selftest.o.
* configure.ac: Append selftest-arch.c and common/selftest.c to
CONFIG_SRCS. Append selftest-arch.o and selftest.o to COMMON_OBS.
* configure: Re-generated.
* maint.c (maintenance_selftest): Wrap selftests::run_tests with
GDB_SELF_TEST.
(maintenance_info_selftests): Likewise.
gdb/testsuite:
2018-01-08 Simon Marchi <simon.marchi@ericsson.com>
* gdb.gdb/unittest.exp: Match output in non-development mode.
With the growing number of selftests, I think it would be useful to be
able to run only a subset of the tests. This patch associates a name to
each registered selftest. It then allows doing something like:
(gdb) maintenance selftest aarch64
Running self-tests.
Running selftest aarch64-analyze-prologue.
Running selftest aarch64-process-record.
Ran 2 unit tests, 0 failed
or with gdbserver:
./gdbserver --selftest=aarch64
In both cases, only the tests that contain "aarch64" in their name are
ran. To help validate that the tests you want to run were actually ran,
it also prints a message with the test name before running each test.
Right now, all the arch-dependent tests are registered as a single test
of the selftests. To be able to filter those too, I made them
"first-class citizen" selftests. The selftest type is an interface,
with different implementations for "simple selftests" and "arch
selftests". The run_tests function simply iterates on that an invokes
operator() on each test.
I changed the tests data structure from a vector to a map, because
- it allows iterating in a stable (alphabetical) order
- it allows to easily verify if a test with a given name has been
registered, to avoid duplicates
There's also a new command "maintenance info selftests" that lists the
registered selftests.
gdb/ChangeLog:
* common/selftest.h (selftest): New struct/interface.
(register_test): Add name parameter, add new overload.
(run_tests): Add filter parameter.
(for_each_selftest_ftype): New typedef.
(for_each_selftest): New declaration.
* common/selftest.c (tests): Change type to
map<string, unique_ptr<selftest>>.
(simple_selftest): New struct.
(register_test): New function.
(register_test): Add name parameter and use it.
(run_tests): Add filter parameter and use it. Add prints.
Adjust to vector -> map change.
* aarch64-tdep.c (_initialize_aarch64_tdep): Add names when
registering selftests.
* arm-tdep.c (_initialize_arm_tdep): Likewise.
* disasm-selftests.c (_initialize_disasm_selftests): Likewise.
* dwarf2-frame.c (_initialize_dwarf2_frame): Likewise.
* dwarf2loc.c (_initialize_dwarf2loc): Likewise.
* findvar.c (_initialize_findvar): Likewise.
* gdbarch-selftests.c (_initialize_gdbarch_selftests): Likewise.
* maint.c (maintenance_selftest): Update call to run_tests.
(maintenance_info_selftests): New function.
(_initialize_maint_cmds): Register "maintenance info selftests"
command. Update "maintenance selftest" doc.
* regcache.c (_initialize_regcache): Add names when registering
selftests.
* rust-exp.y (_initialize_rust_exp): Likewise.
* selftest-arch.c (gdbarch_selftest): New struct.
(gdbarch_tests): Remove.
(register_test_foreach_arch): Add name parameter. Call
register_test.
(tests_with_arch): Remove, move most content to
gdbarch_selftest::operator().
(_initialize_selftests_foreach_arch): Remove.
* selftest-arch.h (register_test_foreach_arch): Add name
parameter.
(run_tests_with_arch): New declaration.
* utils-selftests.c (_initialize_utils_selftests): Add names
when registering selftests.
* utils.c (_initialize_utils): Likewise.
* unittests/array-view-selftests.c
(_initialize_array_view_selftests): Likewise.
* unittests/environ-selftests.c (_initialize_environ_selftests):
Likewise.
* unittests/function-view-selftests.c
(_initialize_function_view_selftests): Likewise.
* unittests/offset-type-selftests.c
(_initialize_offset_type_selftests): Likewise.
* unittests/optional-selftests.c
(_initialize_optional_selftests): Likewise.
* unittests/scoped_restore-selftests.c
(_initialize_scoped_restore_selftests): Likewise.
* NEWS: Document "maintenance selftest" and "maint info
selftests".
gdb/gdbserver/ChangeLog:
* server.c (captured_main): Accept argument for --selftest.
Update run_tests call.
* linux-x86-tdesc-selftest.c (initialize_low_tdesc): Add names
when registering selftests.
gdb/doc/ChangeLog:
* gdb.texinfo (Maintenance Commands): Document filter parameter
of "maint selftest". Document "maint info selftests" command.
Now, GDB is able to dynamically create i386-linux target descriptions
from features, instead of using pre-generated target descriptions. These
pre-generated target descriptions are no longer used by GDB (note that
they are still used by GDBserver).
This patch add a new maint command "maint check xml-descriptions" to test
dynamically generated tdesc are identical to these generated from xml files.
gdb:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* cli/cli-cmds.c (maintenancechecklist): New variable.
* gdbcmd.h (maintenancechecklist): Declare it.
* i386-linux-tdep.c (_initialize_i386_linux_tdep) [GDB_SELF_TEST]:
Call i386_linux_read_description with different masks.
* maint.c (maintenance_check_command): New function.
(_initialize_maint_cmds): Call add_prefix_cmd.
* target-descriptions.c (tdesc_reg): override operator != and ==.
(tdesc_type): Likewise.
(tdesc_feature): Likewise.
(target_desc): Likewise.
[GDB_SELF_TEST] (selftests::record_xml_tdesc): New function.
(maintenance_check_xml_descriptions): New function.
(_initialize_target_descriptions) Add command "xml-descriptions".
* target-descriptions.h (selftests::record_xml_tdesc): Declare.
gdb/testsuite:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* gdb.gdb/unittest.exp: Invoke command
"maintenance check xml-descriptions".
gdb/doc:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* gdb.texinfo (Maintenance Commands): Document command
"maint check xml-descriptions".
This patch starts from the desire to eliminate
make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file &
friends a real C++ class hierarchy, and switches temporary
ui_file-like objects to stack-based allocation.
- mem_fileopen -> string_file
mem_fileopen is replaced with a new string_file class that is treated
as a value class created on the stack. This alone eliminates most
make_cleanup_ui_file_delete calls, and, simplifies code a whole lot
(diffstat shows around 1k loc dropped.)
string_file's internal buffer is a std::string, thus the "string" in
the name. This simplifies the implementation much, compared to
mem_fileopen, which managed growing its internal buffer manually.
- ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone
The new string_file class has a string() method that provides direct
writable access to the internal std::string buffer. This replaced
ui_file_as_string, which forced a copy of the same data the stream had
inside. With direct access via a writable reference, we can instead
move the string out of the string_stream, avoiding deep string
copying.
Related, ui_file_xstrdup calls are replaced with xstrdup'ping the
stream's string, and ui_file_obsavestring is replaced by
obstack_copy0.
With all those out of the way, getting rid of the weird ui_file_put
mechanism was possible.
- New ui_file::printf, ui_file::puts, etc. methods
These simplify / clarify client code. I considered splitting
client-code changes, like these, e.g.:
- stb = mem_fileopen ();
- fprintf_unfiltered (stb, "%s%s%s",
- _("The valid values are:\n"),
- regdesc,
- _("The default is \"std\"."));
+ string_file stb;
+ stb.printf ("%s%s%s",
+ _("The valid values are:\n"),
+ regdesc,
+ _("The default is \"std\"."));
In two steps, with the first step leaving fprintf_unfiltered (etc.)
calls in place, and only afterwards do a pass to change all those to
call stb.printf etc.. I didn't do that split, because (when I tried),
it turned out to be pointless make-work: the first pass would have to
touch the fprintf_unfiltered line anyway, to replace "stb" with
"&stb".
- gdb_fopen replaced with stack-based objects
This avoids the need for cleanups or unique_ptr's. I.e., this:
struct ui_file *file = gdb_fopen (filename, "w");
if (filename == NULL)
perror_with_name (filename);
cleanups = make_cleanup_ui_file_delete (file);
// use file.
do_cleanups (cleanups);
is replaced with this:
stdio_file file;
if (!file.open (filename, "w"))
perror_with_name (filename);
// use file.
- odd contorsions in null_file_write / null_file_fputs around when to
call to_fputs / to_write eliminated.
- Global null_stream object
A few places that were allocating a ui_file in order to print to
"nowhere" are adjusted to instead refer to a new 'null_stream' global
stream.
- TUI's tui_sfileopen eliminated. TUI's ui_file much simplified
The TUI's ui_file was serving a dual purpose. It supported being used
as string buffer, and supported being backed by a stdio FILE. The
string buffer part is gone, replaced by using of string_file. The
'FILE *' support is now much simplified, by making the TUI's ui_file
inherit from stdio_file.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* ada-lang.c (type_as_string): Use string_file.
* ada-valprint.c (ada_print_floating): Use string_file.
* ada-varobj.c (ada_varobj_scalar_image)
(ada_varobj_get_value_image): Use string_file.
* aix-thread.c (aix_thread_extra_thread_info): Use string_file.
* arm-tdep.c (_initialize_arm_tdep): Use string_printf.
* breakpoint.c (update_inserted_breakpoint_locations)
(insert_breakpoint_locations, reattach_breakpoints)
(print_breakpoint_location, print_one_detail_ranged_breakpoint)
(print_it_watchpoint): Use string_file.
(save_breakpoints): Use stdio_file.
* c-exp.y (oper): Use string_file.
* cli/cli-logging.c (set_logging_redirect): Use ui_file_up and
tee_file.
(pop_output_files): Use delete.
(handle_redirections): Use stdio_file and tee_file.
* cli/cli-setshow.c (do_show_command): Use string_file.
* compile/compile-c-support.c (c_compute_program): Use
string_file.
* compile/compile-c-symbols.c (generate_vla_size): Take a
'string_file &' instead of a 'ui_file *'.
(generate_c_for_for_one_variable): Take a 'string_file &' instead
of a 'ui_file *'. Use string_file.
(generate_c_for_variable_locations): Take a 'string_file &'
instead of a 'ui_file *'.
* compile/compile-internal.h (generate_c_for_for_one_variable):
Take a 'string_file &' instead of a 'ui_file *'.
* compile/compile-loc2c.c (push, pushf, unary, binary)
(print_label, pushf_register_address, pushf_register)
(do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a
'ui_file *'. Adjust.
* compile/compile.c (compile_to_object): Use string_file.
* compile/compile.h (compile_dwarf_expr_to_c)
(compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a
'ui_file *'.
* cp-support.c (inspect_type): Use string_file and obstack_copy0.
(replace_typedefs_qualified_name): Use string_file and
obstack_copy0.
* disasm.c (gdb_pretty_print_insn): Use string_file.
(gdb_disassembly): Adjust reference the null_stream global.
(do_ui_file_delete): Delete.
(gdb_insn_length): Use null_stream.
* dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file.
* dwarf2loc.c (dwarf2_compile_property_to_c)
(locexpr_generate_c_location, loclist_generate_c_location): Take a
'string_file &' instead of a 'ui_file *'.
* dwarf2loc.h (dwarf2_compile_property_to_c): Likewise.
* dwarf2read.c (do_ui_file_peek_last): Delete.
(dwarf2_compute_name): Use string_file.
* event-top.c (gdb_setup_readline): Use stdio_file.
* gdbarch.sh (verify_gdbarch): Use string_file.
* gdbtypes.c (safe_parse_type): Use null_stream.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use
string_file.
* guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a
'string_file *' instead of a 'ui_file *'.
(gdbscm_arch_disassemble): Use string_file.
* guile/scm-frame.c (frscm_print_frame_smob): Use string_file.
* guile/scm-ports.c (class ioscm_file_port): Now a class that
inherits from ui_file.
(ioscm_file_port_delete, ioscm_file_port_rewind)
(ioscm_file_port_put): Delete.
(ioscm_file_port_write): Rename to ...
(ioscm_file_port::write): ... this. Remove file_port_magic
checks.
(ioscm_file_port_new): Delete.
(ioscm_with_output_to_port_worker): Use ioscm_file_port and
ui_file_up.
* guile/scm-type.c (tyscm_type_name): Use string_file.
* guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print):
Use string_file.
* infcmd.c (print_return_value_1): Use string_file.
* infrun.c (print_target_wait_results): Use string_file.
* language.c (add_language): Use string_file.
* location.c (explicit_to_string_internal): Use string_file.
* main.c (captured_main_1): Use null_file.
* maint.c (maintenance_print_architecture): Use stdio_file.
* mi/mi-cmd-stack.c (list_arg_or_local): Use string_file.
* mi/mi-common.h (struct mi_interp) <out, err, log, targ,
event_channel>: Change type to mi_console_file pointer.
* mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush)
(mi_console_file_delete): Delete.
(struct mi_console_file): Delete.
(mi_console_file_magic): Delete.
(mi_console_file_new): Delete.
(mi_console_file::mi_console_file): New.
(mi_console_file_delete): Delete.
(mi_console_file_fputs): Delete.
(mi_console_file::write): New.
(mi_console_raw_packet): Delete.
(mi_console_file::flush): New.
(mi_console_file_flush): Delete.
(mi_console_set_raw): Rename to ...
(mi_console_file::set_raw): ... this.
* mi/mi-console.h (class mi_console_file): New class.
(mi_console_file_new, mi_console_set_raw): Delete.
* mi/mi-interp.c (mi_interpreter_init): Use mi_console_file.
(mi_set_logging): Use delete and tee_file. Adjust.
* mi/mi-main.c (output_register): Use string_file.
(mi_cmd_data_evaluate_expression): Use string_file.
(mi_cmd_data_read_memory): Use string_file.
(mi_cmd_execute, print_variable_or_computed): Use string_file.
* mi/mi-out.c (mi_ui_out::main_stream): New.
(mi_ui_out::rewind): Use main_stream and
string_file.
(mi_ui_out::put): Use main_stream and string_file.
(mi_ui_out::mi_ui_out): Remove 'stream' parameter.
Allocate a 'string_file' instead.
(mi_out_new): Don't allocate a mem_fileopen stream here.
* mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter.
(mi_ui_out::main_stream): Declare method.
* printcmd.c (eval_command): Use string_file.
* psymtab.c (maintenance_print_psymbols): Use stdio_file.
* python/py-arch.c (archpy_disassemble): Use string_file.
* python/py-breakpoint.c (bppy_get_commands): Use string_file.
* python/py-frame.c (frapy_str): Use string_file.
* python/py-framefilter.c (py_print_type, py_print_single_arg):
Use string_file.
* python/py-type.c (typy_str): Use string_file.
* python/py-unwind.c (unwind_infopy_str): Use string_file.
* python/py-value.c (valpy_str): Use string_file.
* record-btrace.c (btrace_insn_history): Use string_file.
* regcache.c (regcache_print): Use stdio_file.
* reggroups.c (maintenance_print_reggroups): Use stdio_file.
* remote.c (escape_buffer): Use string_file.
* rust-lang.c (rust_get_disr_info): Use string_file.
* serial.c (serial_open_ops_1): Use stdio_file.
(do_serial_close): Use delete.
* stack.c (print_frame_arg): Use string_file.
(print_frame_args): Remove local mem_fileopen stream, not used.
(print_frame): Use string_file.
* symmisc.c (maintenance_print_symbols): Use stdio_file.
* symtab.h (struct symbol_computed_ops) <generate_c_location>:
Take a 'string_file *' instead of a 'ui_file *'.
* top.c (new_ui): Use stdio_file and stderr_file.
(free_ui): Use delete.
(execute_command_to_string): Use string_file.
(quit_confirm): Use string_file.
* tracepoint.c (collection_list::append_exp): Use string_file.
* tui/tui-disasm.c (tui_disassemble): Use string_file.
* tui/tui-file.c: Don't include "ui-file.h".
(enum streamtype, struct tui_stream): Delete.
(tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen)
(tui_file_isatty, tui_file_rewind, tui_file_put): Delete.
(tui_file::tui_file): New method.
(tui_file_fputs): Delete.
(tui_file_get_strbuf): Delete.
(tui_file::puts): New method.
(tui_file_adjust_strbuf): Delete.
(tui_file_flush): Delete.
(tui_file::flush): New method.
* tui/tui-file.h: Tweak intro comment.
Include ui-file.h.
(tui_fileopen, tui_sfileopen, tui_file_get_strbuf)
(tui_file_adjust_strbuf): Delete declarations.
(class tui_file): New class.
* tui/tui-io.c (tui_initialize_io): Use tui_file.
* tui/tui-regs.c (tui_restore_gdbout): Use delete.
(tui_register_format): Use string_stream.
* tui/tui-stack.c (tui_make_status_line): Use string_file.
(tui_get_function_from_frame): Use string_file.
* typeprint.c (type_to_string): Use string_file.
* ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete.
(null_stream): New global.
(ui_file_delete): Delete.
(ui_file::ui_file): New.
(null_file_isatty): Delete.
(ui_file::~ui_file): New.
(null_file_rewind): Delete.
(ui_file::printf): New.
(null_file_put): Delete.
(null_file_flush): Delete.
(ui_file::putstr): New.
(null_file_write): Delete.
(ui_file::putstrn): New.
(null_file_read): Delete.
(ui_file::putc): New.
(null_file_fputs): Delete.
(null_file_write_async_safe): Delete.
(ui_file::vprintf): New.
(null_file_delete): Delete.
(null_file::write): New.
(null_file_fseek): Delete.
(null_file::puts): New.
(ui_file_data): Delete.
(null_file::write_async_safe): New.
(gdb_flush, ui_file_isatty): Adjust.
(ui_file_put, ui_file_rewind): Delete.
(ui_file_write): Adjust.
(ui_file_write_for_put): Delete.
(ui_file_write_async_safe, ui_file_read): Adjust.
(ui_file_fseek): Delete.
(fputs_unfiltered): Adjust.
(set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind)
(set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe)
(set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek)
(set_ui_file_data): Delete.
(string_file::~string_file, string_file::write)
(struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup)
(do_ui_file_as_string, ui_file_as_string): Delete.
(do_ui_file_obsavestring, ui_file_obsavestring): Delete.
(struct mem_file): Delete.
(mem_file_new): Delete.
(stdio_file::stdio_file): New.
(mem_file_delete): Delete.
(stdio_file::stdio_file): New.
(mem_fileopen): Delete.
(stdio_file::~stdio_file): New.
(mem_file_rewind): Delete.
(stdio_file::set_stream): New.
(mem_file_put): Delete.
(stdio_file::open): New.
(mem_file_write): Delete.
(stdio_file_magic, struct stdio_file): Delete.
(stdio_file_new, stdio_file_delete, stdio_file_flush): Delete.
(stdio_file::flush): New.
(stdio_file_read): Rename to ...
(stdio_file::read): ... this. Adjust.
(stdio_file_write): Rename to ...
(stdio_file::write): ... this. Adjust.
(stdio_file_write_async_safe): Rename to ...
(stdio_file::write_async_safe) ... this. Adjust.
(stdio_file_fputs): Rename to ...
(stdio_file::puts) ... this. Adjust.
(stdio_file_isatty): Delete.
(stdio_file_fseek): Delete.
(stdio_file::isatty): New.
(stderr_file_write): Rename to ...
(stderr_file::write) ... this. Adjust.
(stderr_file_fputs): Rename to ...
(stderr_file::puts) ... this. Adjust.
(stderr_fileopen, stdio_fileopen, gdb_fopen): Delete.
(stderr_file::stderr_file): New.
(tee_file_magic): Delete.
(struct tee_file): Delete.
(tee_file::tee_file): New.
(tee_file_new): Delete.
(tee_file::~tee_file): New.
(tee_file_delete): Delete.
(tee_file_flush): Rename to ...
(tee_file::flush): ... this. Adjust.
(tee_file_write): Rename to ...
(tee_file::write): ... this. Adjust.
(tee_file::write_async_safe): New.
(tee_file_fputs): Rename to ...
(tee_file::puts): ... this. Adjust.
(tee_file_isatty): Rename to ...
(tee_file::isatty): ... this. Adjust.
* ui-file.h (struct obstack, struct ui_file): Don't
forward-declare.
(ui_file_new, ui_file_flush_ftype, set_ui_file_flush)
(ui_file_write_ftype)
(set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs)
(ui_file_write_async_safe_ftype, set_ui_file_write_async_safe)
(ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype)
(set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind)
(ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put)
(ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype)
(set_ui_file_fseek): Delete.
(ui_file_data, ui_file_delete, ui_file_rewind)
(struct ui_file): New.
(ui_file_up): New.
(class null_file): New.
(null_stream): Declare.
(ui_file_write_for_put, ui_file_put): Delete.
(ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring):
Delete.
(ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen)
(gdb_fopen, tee_file_new): Delete.
(struct string_file): New.
(struct stdio_file): New.
(stdio_file_up): New.
(struct stderr_file): New.
(class tee_file): New.
* ui-out.c (ui_out::field_stream): Take a 'string_file &' instead
of a 'ui_file *'. Adjust.
* ui-out.h (class ui_out) <field_stream>: Likewise.
* utils.c (do_ui_file_delete, make_cleanup_ui_file_delete)
(null_stream): Delete.
(error_stream): Take a 'string_file &' instead of a 'ui_file *'.
Adjust.
* utils.h (struct ui_file): Delete forward declaration..
(make_cleanup_ui_file_delete, null_stream): Delete declarations.
(error_stream): Take a 'string_file &' instead of a
'ui_file *'.
* varobj.c (varobj_value_get_print_value): Use string_file.
* xtensa-tdep.c (xtensa_verify_config): Use string_file.
* gdbarch.c: Regenerate.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
This patch fixes a few problems with GDB's time handling.
#1 - It avoids problems with gnulib's C++ namespace support
On MinGW, the struct timeval that should be passed to gnulib's
gettimeofday replacement is incompatible with libiberty's
timeval_sub/timeval_add. That's because gnulib also replaces "struct
timeval" with its own definition, while libiberty expects the
system's.
E.g., in code like this:
gettimeofday (&prompt_ended, NULL);
timeval_sub (&prompt_delta, &prompt_ended, &prompt_started);
timeval_add (&prompt_for_continue_wait_time,
&prompt_for_continue_wait_time, &prompt_delta);
That's currently handled in gdb by not using gnulib's gettimeofday at
all (see common/gdb_sys_time.h), but that #undef hack won't work with
if/when we enable gnulib's C++ namespace support, because that mode
adds compile time warnings for uses of ::gettimeofday, which are hard
errors with -Werror.
#2 - But there's an elephant in the room: gettimeofday is not monotonic...
We're using it to:
a) check how long functions take, for performance analysis
b) compute when in the future to fire events in the event-loop
c) print debug timestamps
But that's exactly what gettimeofday is NOT meant for. Straight from
the man page:
~~~
The time returned by gettimeofday() is affected by
discontinuous jumps in the system time (e.g., if the system
administrator manually changes the system time). If you need a
monotonically increasing clock, see clock_gettime(2).
~~~
std::chrono (part of the C++11 standard library) has a monotonic clock
exactly for such purposes (std::chrono::steady_clock). This commit
switches to use that instead of gettimeofday, fixing all the issues
mentioned above.
gdb/ChangeLog:
2016-11-23 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add common/run-time-clock.c.
(HFILES_NO_SRCDIR): Add common/run-time-clock.h.
(COMMON_OBS): Add run-time-clock.o.
* common/run-time-clock.c, common/run-time-clock.h: New files.
* defs.h (struct timeval, print_transfer_performance): Delete
declarations.
* event-loop.c (struct gdb_timer) <when>: Now a
std::chrono::steady_clock::time_point.
(create_timer): use std::chrono::steady_clock instead of
gettimeofday. Use new instead of malloc.
(delete_timer): Use delete instead of xfree.
(duration_cast_timeval): New.
(update_wait_timeout): Use std::chrono::steady_clock instead of
gettimeofday.
* maint.c: Include <chrono> instead of "gdb_sys_time.h", <time.h>
and "timeval-utils.h".
(scoped_command_stats::~scoped_command_stats)
(scoped_command_stats::scoped_command_stats): Use
std::chrono::steady_clock instead of gettimeofday. Use
user_cpu_time_clock instead of get_run_time.
* maint.h: Include "run-time-clock.h" and <chrono>.
(scoped_command_stats): <m_start_cpu_time>: Now a
user_cpu_time_clock::time_point.
<m_start_wall_time>: Now a std::chrono::steady_clock::time_point.
* mi/mi-main.c: Include "run-time-clock.h" and <chrono> instead of
"gdb_sys_time.h" and <sys/resource.h>.
(rusage): Delete.
(mi_execute_command): Use new instead of XNEW.
(mi_load_progress): Use std::chrono::steady_clock instead of
gettimeofday.
(timestamp): Rewrite in terms of std::chrono::steady_clock,
user_cpu_time_clock and system_cpu_time_clock.
(timeval_diff): Delete.
(print_diff): Adjust to use std::chrono::steady_clock,
user_cpu_time_clock and system_cpu_time_clock.
* mi/mi-parse.h: Include "run-time-clock.h" and <chrono> instead
of "gdb_sys_time.h".
(struct mi_timestamp): Change fields types to
std::chrono::steady_clock::time_point, user_cpu_time_clock::time
and system_cpu_time_clock::time_point, instead of struct timeval.
* symfile.c: Include <chrono> instead of <time.h> and
"gdb_sys_time.h".
(struct time_range): New.
(generic_load): Use std::chrono::steady_clock instead of
gettimeofday.
(print_transfer_performance): Replace timeval parameters with a
std::chrono::steady_clock::duration parameter. Adjust.
* utils.c: Include <chrono> instead of "timeval-utils.h",
"gdb_sys_time.h", and <time.h>.
(prompt_for_continue_wait_time): Now a
std::chrono::steady_clock::duration.
(defaulted_query, prompt_for_continue): Use
std::chrono::steady_clock instead of
gettimeofday/timeval_sub/timeval_add.
(reset_prompt_for_continue_wait_time): Use
std::chrono::steady_clock::duration instead of struct timeval.
(get_prompt_for_continue_wait_time): Return a
std::chrono::steady_clock::duration instead of struct timeval.
(vfprintf_unfiltered): Use std::chrono::steady_clock instead of
gettimeofday. Use std::string. Use '.' instead of ':'.
* utils.h: Include <chrono>.
(get_prompt_for_continue_wait_time): Return a
std::chrono::steady_clock::duration instead of struct timeval.
gdb/gdbserver/ChangeLog:
2016-11-23 Pedro Alves <palves@redhat.com>
* debug.c: Include <chrono> instead of "gdb_sys_time.h".
(debug_vprintf): Use std::chrono::steady_clock instead of
gettimeofday. Use '.' instead of ':'.
* tracepoint.c: Include <chrono> instead of "gdb_sys_time.h".
(get_timestamp): Use std::chrono::steady_clock instead of
gettimeofday.
This commit fixes these regressions:
FAIL: gdb.base/maint.exp: mt set per on for expand-symtabs
FAIL: gdb.base/maint.exp: maint set per-command on
caused by commit 1e3b796d58 ("Change command stats reporting to use
class").
gdb.log shows that the command stats are now printing garbage:
(gdb) mt set per on
Command execution time: -6.-419590 (cpu), 1467139648.-7706296840 (wall)
Space used: 9809920 (-33276528 for this command)
(gdb) FAIL: gdb.base/maint.exp: mt set per on for expand-symtabs
while there should have been no output at all.
The stats printing is done from within the scoped_command_stats's
destructor, depending on whether some flags in the object are set.
The problem is simply that scoped_command_stats's ctor misses clearing
those flags on some paths.
Since scoped_command_stats objects are allocated on the stack, whether
you'll see the regression simply depends on whatever happens to
already be on the stack space the object occupies.
gdb/ChangeLog:
2016-10-28 Pedro Alves <palves@redhat.com>
* maint.c (scoped_command_stats::scoped_command_stats): Clear
m_space_enabled, m_time_enabled and m_symtab_enabled.
This removes make_command_stats_cleanup in favor of an RAII class.
The patch is reasonably straightforward, but keeping the same
semantics without excessive reindentation required splitting
captured_main in two.
2016-10-21 Tom Tromey <tom@tromey.com>
* maint.h (scoped_command_stats): New class.
(make_command_stats_cleanup): Don't declare.
* maint.c (struct cmd_stats): Remove.
(~scoped_command_stats): Rename from report_command_stats. Now a
destructor.
(scoped_command_stats): Rename from make_command_stats_cleanup.
Now a constructor.
* main.c (captured_main_1): New function. Use
scoped_command_stats.
(captured_main): Call captured_main_1.
* event-top.c (command_handler): Use scoped_command_stats.
I wanted to unit test the Rust lexer, so I added a simple unit testing
command to gdb.
The intent is that self tests will only be compiled into gdb in
development mode. In release mode they simply won't exist. So, this
exposes $development to C code as GDB_SELF_TEST.
In development mode, test functions are registered with the self test
module. A test function is just a function that does some checks, and
throws an exception on failure.
Then this adds a new "maint selftest" command which invokes the test
functions, and a new dejagnu test case that invokes it.
2016-05-17 Tom Tromey <tom@tromey.com>
* NEWS: Add "maint selftest" entry.
* selftest.h: New file.
* selftest.c: New file.
* maint.c: Include selftest.h.
(maintenance_selftest): New function.
(_initialize_maint_cmds): Add "maint selftest" command.
* configure.ac (GDB_SELF_TEST): Maybe define.
* config.in, configure: Rebuild.
* Makefile.in (SFILES): Add selftest.c.
(COMMON_OBS): Add selftest.o.
2016-05-17 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Maintenance Commands): Document "maint selftest".
2016-05-17 Tom Tromey <tom@tromey.com>
* gdb.gdb/unittest.exp: New file.
After the last gnulib import (Dec 2012), gnulib upstream started
replacing mingw's 'struct timeval' with a version with 64-bit time_t,
for POSIX compliance:
commit f8e84098084b3b53bc6943a5542af1f607ffd477
Author: Bruno Haible <bruno@clisp.org>
Date: Sat Jan 28 18:12:10 2012 +0100
sys_time: Override 'struct timeval' on some native Windows platforms.
See:
https://lists.gnu.org/archive/html/bug-gnulib/2012-01/msg00372.html
However, that results in conflicts with native Winsock2's 'select':
select()'s argument
http://sourceforge.net/p/mingw-w64/mailman/message/29610438/
... and libiberty's timeval-utils.h timeval_add/timeval_sub, at the
least.
We don't really need the POSIX compliance, so this patch prepares us
to simply not use gnulib's 'struct timeval' replacement once a more
recent gnulib is imported, thus preserving the current behavior, by
adding a sys/time.h wrapper header that undefs gnulib's replacements,
and including that everywhere instead.
The SIZE -> OSIZE change is necessary because newer gnulib's
sys/time.h also includes windows.h/winsock2.h, which defines a
conflicting SIZE symbol.
Cross build-tested mingw-w64 32-bit and 64-bit.
Regtested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-08-24 Pedro Alves <palves@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Add common/gdb_sys_time.h.
* common/gdb_sys_time.h: New file.
* event-loop.c: Include gdb_sys_time.h instead of sys/time.h.
* gdb_select.h: Likewise.
* gdb_usleep.c: Likewise.
* maint.c: Likewise.
* mi/mi-main.c: Likewise.
* mi/mi-parse.h: Likewise.
* remote-fileio.c: Likewise.
* remote-m32r-sdi.c: Likewise.
* remote.c: Likewise.
* ser-base.c: Likewise.
* ser-pipe.c: Likewise.
* ser-tcp.c: Likewise.
* ser-unix.c: Likewise.
* symfile.c: Likewise.
* symfile.c: Likewise. Rename OSIZE to SIZE throughout.
* target-memory.c: Include gdb_sys_time.h instead of sys/time.h.
* utils.c: Likewise.
gdb/gdbserver/ChangeLog:
2015-08-24 Pedro Alves <palves@redhat.com>
* debug.c: Include gdb_sys_time.h instead of sys/time.h.
* event-loop.c: Likewise.
* remote-utils.c: Likewise.
* tracepoint.c: Likewise.
These symbols are defined in C code, so in C++ mode we need to use
extern "C" to declare them. As extern "C" can't be used inside a
function's scope, we move the declarations to the global scope at the
same time.
gdb/ChangeLog:
2015-02-27 Pedro Alves <palves@redhat.com>
* cli-out.c (_rl_erase_entire_line): Move declaration out of
cli_mld_erase_entire_line, and make it extern "C".
* common/common-defs.h (EXTERN_C): New.
* completer.c (_rl_completion_prefix_display_length)
(_rl_print_completions_horizontally, QSFUNC): Move declarations
out of gdb_display_match_list_1.
(_rl_qsort_string_compare): Move declaration out of
gdb_display_match_list_1, and make it extern "C".
* defs.h (re_comp): Use EXTERN_C.
* maint.c (_mcleanup): Move declaration out of mcleanup_wrapper,
and make it extern "C".
(monstartup): Move declaration out of maintenance_set_profile_cmd,
and make it extern "C".
(main): Move declaration out of maintenance_set_profile_cmd.
* nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use
EXTERN_C.
gdb/ChangeLog:
PR gdb/15830
* NEWS: The "maint demangle" command is renamed as "demangle".
* demangle.c: #include cli/cli-utils.h, language.h.
(demangle_command): New function.
(_initialize_demangle): Add new command "demangle".
* maint.c (maintenance_demangle): Stub out.
(_initialize_maint_cmds): Update help text for "maint demangle",
and mark as deprecated.
gdb/doc/ChangeLog:
* gdb.texinfo (Debugging C Plus Plus): Mention "demangle".
(Symbols): Ditto.
(Maintenance Commands): Delete docs for "maint demangle".
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Remove references to "maint demangle".
* gdb.cp/demangle.exp: Update. "maint demangle" -> "demangle".
Add tests for explicitly specifying language to demangle.
* gdb.dlang/demangle.exp: Ditto.
Currently "symtabs" in gdb are stored as a single linked list of
struct symtab that contains both symbol symtabs (the blockvectors)
and file symtabs (the linetables).
This has led to confusion, bugs, and performance issues.
This patch is conceptually very simple: split struct symtab into
two pieces: one part containing things common across the entire
compilation unit, and one part containing things specific to each
source file.
Example.
For the case of a program built out of these files:
foo.c
foo1.h
foo2.h
bar.c
foo1.h
bar.h
Today we have a single list of struct symtabs:
objfile -> foo.c -> foo1.h -> foo2.h -> bar.c -> foo1.h -> bar.h -> NULL
where "->" means the "next" pointer in struct symtab.
With this patch, that turns into:
objfile -> foo.c(cu) -> bar.c(cu) -> NULL
| |
v v
foo.c bar.c
| |
v v
foo1.h foo1.h
| |
v v
foo2.h bar.h
| |
v v
NULL NULL
where "foo.c(cu)" and "bar.c(cu)" are struct compunit_symtab objects,
and the files foo.c, etc. are struct symtab objects.
So now, for example, when we want to iterate over all blockvectors
we can now just iterate over the compunit_symtab list.
Plus a lot of the data that was either unused or replicated for each
symtab in a compilation unit now lives in struct compunit_symtab.
E.g., the objfile pointer, the producer string, etc.
I thought of moving "language" out of struct symtab but there is
logic to try to compute the language based on previously seen files,
and I think that's best left as is for now.
With my standard monster benchmark with -readnow (which I can't actually
do, but based on my calculations), whereas today the list requires
77MB to store all the struct symtabs, it now only requires 37MB.
A modest space savings given the gigabytes needed for all the debug info,
etc. Still, it's nice. Plus, whereas today we create a copy of dirname
for each source file symtab in a compilation unit, we now only create one
for the compunit.
So this patch is basically just a data structure reorg,
I don't expect significant performance improvements from it.
Notes:
1) A followup patch can do a similar split for struct partial_symtab.
I have left that until after I get the changes I want in to
better utilize .gdb_index (it may affect how we do partial syms).
2) Another followup patch *could* rename struct symtab.
The term "symtab" is ambiguous and has been a source of confusion.
In this patch I'm leaving it alone, calling it the "historical" name
of "filetabs", which is what they are now: just the file-name + line-table.
gdb/ChangeLog:
Split struct symtab into two: struct symtab and compunit_symtab.
* amd64-tdep.c (amd64_skip_xmm_prologue): Fetch producer from compunit.
* block.c (blockvector_for_pc_sect): Change "struct symtab *" argument
to "struct compunit_symtab *". All callers updated.
(set_block_compunit_symtab): Renamed from set_block_symtab. Change
"struct symtab *" argument to "struct compunit_symtab *".
All callers updated.
(get_block_compunit_symtab): Renamed from get_block_symtab. Change
result to "struct compunit_symtab *". All callers updated.
(find_iterator_compunit_symtab): Renamed from find_iterator_symtab.
Change result to "struct compunit_symtab *". All callers updated.
* block.h (struct global_block) <compunit_symtab>: Renamed from symtab.
hange type to "struct compunit_symtab *". All uses updated.
(struct block_iterator) <d.compunit_symtab>: Renamed from "d.symtab".
Change type to "struct compunit_symtab *". All uses updated.
* buildsym.c (struct buildsym_compunit): New struct.
(subfiles, buildsym_compdir, buildsym_objfile, main_subfile): Delete.
(buildsym_compunit): New static global.
(finish_block_internal): Update to fetch objfile from
buildsym_compunit.
(make_blockvector): Delete objfile argument.
(start_subfile): Rewrite to use buildsym_compunit. Don't initialize
debugformat, producer.
(start_buildsym_compunit): New function.
(free_buildsym_compunit): Renamed from free_subfiles_list.
All callers updated.
(patch_subfile_names): Rewrite to use buildsym_compunit.
(get_compunit_symtab): New function.
(get_macro_table): Delete argument comp_dir. All callers updated.
(start_symtab): Change result to "struct compunit_symtab *".
All callers updated. Create the subfile of the main source file.
(watch_main_source_file_lossage): Rewrite to use buildsym_compunit.
(reset_symtab_globals): Update.
(end_symtab_get_static_block): Update to use buildsym_compunit.
(end_symtab_without_blockvector): Rewrite.
(end_symtab_with_blockvector): Change result to
"struct compunit_symtab *". All callers updated.
Update to use buildsym_compunit. Don't set symtab->dirname,
instead set it in the compunit.
Explicitly make sure main symtab is first in its list.
Set debugformat, producer, blockvector, block_line_section, and
macrotable in the compunit.
(end_symtab_from_static_block): Change result to
"struct compunit_symtab *". All callers updated.
(end_symtab, end_expandable_symtab): Ditto.
(set_missing_symtab): Change symtab argument to
"struct compunit_symtab *". All callers updated.
(augment_type_symtab): Ditto.
(record_debugformat): Update to use buildsym_compunit.
(record_producer): Update to use buildsym_compunit.
* buildsym.h (struct subfile) <dirname>: Delete.
<producer, debugformat>: Delete.
<buildsym_compunit>: New member.
(get_compunit_symtab): Declare.
* dwarf2read.c (struct type_unit_group) <compunit_symtab>: Renamed
from primary_symtab. Change type to "struct compunit_symtab *".
All uses updated.
(dwarf2_start_symtab): Change result to "struct compunit_symtab *".
All callers updated.
(dwarf_decode_macros): Delete comp_dir argument. All callers updated.
(struct dwarf2_per_cu_quick_data) <compunit_symtab>: Renamed from
symtab. Change type to "struct compunit_symtab *". All uses updated.
(dw2_instantiate_symtab): Change result to "struct compunit_symtab *".
All callers updated.
(dw2_find_last_source_symtab): Ditto.
(dw2_lookup_symbol): Ditto.
(recursively_find_pc_sect_compunit_symtab): Renamed from
recursively_find_pc_sect_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(dw2_find_pc_sect_compunit_symtab): Renamed from
dw2_find_pc_sect_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(get_compunit_symtab): Renamed from get_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(recursively_compute_inclusions): Change type of immediate_parent
argument to "struct compunit_symtab *". All callers updated.
(compute_compunit_symtab_includes): Renamed from
compute_symtab_includes. All callers updated. Rewrite to compute
includes of compunit_symtabs and not symtabs.
(process_full_comp_unit): Update to work with struct compunit_symtab.
(process_full_type_unit): Ditto.
(dwarf_decode_lines_1): Delete argument comp_dir. All callers updated.
(dwarf_decode_lines): Remove special case handling of main subfile.
(macro_start_file): Delete argument comp_dir. All callers updated.
(dwarf_decode_macro_bytes): Ditto.
* guile/scm-block.c (bkscm_print_block_syms_progress_smob): Update to
use struct compunit_symtab.
* i386-tdep.c (i386_skip_prologue): Fetch producer from compunit.
* jit.c (finalize_symtab): Build compunit_symtab.
* jv-lang.c (get_java_class_symtab): Change result to
"struct compunit_symtab *". All callers updated.
* macroscope.c (sal_macro_scope): Fetch macro table from compunit.
* macrotab.c (struct macro_table) <compunit_symtab>: Renamed from
comp_dir. Change type to "struct compunit_symtab *".
All uses updated.
(new_macro_table): Change comp_dir argument to cust,
"struct compunit_symtab *". All callers updated.
* maint.c (struct cmd_stats) <nr_compunit_symtabs>: Renamed from
nr_primary_symtabs. All uses updated.
(count_symtabs_and_blocks): Update to handle compunits.
(report_command_stats): Update output, "primary symtabs" renamed to
"compunits".
* mdebugread.c (new_symtab): Change result to
"struct compunit_symtab *". All callers updated.
(parse_procedure): Change type of search_symtab argument to
"struct compunit_symtab *". All callers updated.
* objfiles.c (objfile_relocate1): Loop over blockvectors in a
separate loop.
* objfiles.h (struct objfile) <compunit_symtabs>: Renamed from
symtabs. Change type to "struct compunit_symtab *". All uses updated.
(ALL_OBJFILE_FILETABS): Renamed from ALL_OBJFILE_SYMTABS.
All uses updated.
(ALL_OBJFILE_COMPUNITS): Renamed from ALL_OBJFILE_PRIMARY_SYMTABS.
All uses updated.
(ALL_FILETABS): Renamed from ALL_SYMTABS. All uses updated.
(ALL_COMPUNITS): Renamed from ALL_PRIMARY_SYMTABS. All uses updated.
* psympriv.h (struct partial_symtab) <compunit_symtab>: Renamed from
symtab. Change type to "struct compunit_symtab *". All uses updated.
* psymtab.c (psymtab_to_symtab): Change result type to
"struct compunit_symtab *". All callers updated.
(find_pc_sect_compunit_symtab_from_partial): Renamed from
find_pc_sect_symtab_from_partial. Change result type to
"struct compunit_symtab *". All callers updated.
(lookup_symbol_aux_psymtabs): Change result type to
"struct compunit_symtab *". All callers updated.
(find_last_source_symtab_from_partial): Ditto.
* python/py-symtab.c (stpy_get_producer): Fetch producer from compunit.
* source.c (forget_cached_source_info_for_objfile): Fetch debugformat
and macro_table from compunit.
* symfile-debug.c (debug_qf_find_last_source_symtab): Change result
type to "struct compunit_symtab *". All callers updated.
(debug_qf_lookup_symbol): Ditto.
(debug_qf_find_pc_sect_compunit_symtab): Renamed from
debug_qf_find_pc_sect_symtab, change result type to
"struct compunit_symtab *". All callers updated.
* symfile.c (allocate_symtab): Delete objfile argument.
New argument cust.
(allocate_compunit_symtab): New function.
(add_compunit_symtab_to_objfile): New function.
* symfile.h (struct quick_symbol_functions) <lookup_symbol>:
Change result type to "struct compunit_symtab *". All uses updated.
<find_pc_sect_compunit_symtab>: Renamed from find_pc_sect_symtab.
Change result type to "struct compunit_symtab *". All uses updated.
* symmisc.c (print_objfile_statistics): Compute blockvector count in
separate loop.
(dump_symtab_1): Update test for primary source symtab.
(maintenance_info_symtabs): Update to handle compunit symtabs.
(maintenance_check_symtabs): Ditto.
* symtab.c (set_primary_symtab): Delete.
(compunit_primary_filetab): New function.
(compunit_language): New function.
(iterate_over_some_symtabs): Change type of arguments "first",
"after_last" to "struct compunit_symtab *". All callers updated.
Update to loop over symtabs in each compunit.
(error_in_psymtab_expansion): Rename symtab argument to cust,
and change type to "struct compunit_symtab *". All callers updated.
(find_pc_sect_compunit_symtab): Renamed from find_pc_sect_symtab.
Change result type to "struct compunit_symtab *". All callers updated.
(find_pc_compunit_symtab): Renamed from find_pc_symtab.
Change result type to "struct compunit_symtab *". All callers updated.
(find_pc_sect_line): Only loop over symtabs within selected compunit
instead of all symtabs in the objfile.
* symtab.h (struct symtab) <blockvector>: Moved to compunit_symtab.
<compunit_symtab> New member.
<block_line_section>: Moved to compunit_symtab.
<locations_valid>: Ditto.
<epilogue_unwind_valid>: Ditto.
<macro_table>: Ditto.
<dirname>: Ditto.
<debugformat>: Ditto.
<producer>: Ditto.
<objfile>: Ditto.
<call_site_htab>: Ditto.
<includes>: Ditto.
<user>: Ditto.
<primary>: Delete
(SYMTAB_COMPUNIT): New macro.
(SYMTAB_BLOCKVECTOR): Update definition.
(SYMTAB_OBJFILE): Update definition.
(SYMTAB_DIRNAME): Update definition.
(struct compunit_symtab): New type. Common members among all source
symtabs within a compilation unit moved here. All uses updated.
(COMPUNIT_OBJFILE): New macro.
(COMPUNIT_FILETABS): New macro.
(COMPUNIT_DEBUGFORMAT): New macro.
(COMPUNIT_PRODUCER): New macro.
(COMPUNIT_DIRNAME): New macro.
(COMPUNIT_BLOCKVECTOR): New macro.
(COMPUNIT_BLOCK_LINE_SECTION): New macro.
(COMPUNIT_LOCATIONS_VALID): New macro.
(COMPUNIT_EPILOGUE_UNWIND_VALID): New macro.
(COMPUNIT_CALL_SITE_HTAB): New macro.
(COMPUNIT_MACRO_TABLE): New macro.
(ALL_COMPUNIT_FILETABS): New macro.
(compunit_symtab_ptr): New typedef.
(DEF_VEC_P (compunit_symtab_ptr)): New vector type.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Update expected output.
This constifies deprecate_cmd and the "replacement" field in struct
cmd_list_element.
2014-07-24 Tom Tromey <tromey@redhat.com>
* cli/cli-decode.c (deprecate_cmd): Make "replacement" const.
* cli/cli-decode.h (struct cmd_list_element) <replacement>: Now
const.
* command.h (deprecate_cmd): Update.
* maint.c (maintenance_do_deprecate): Add casts.
This does a bit of constification in maint.c, making
print_bfd_section_info a bit cleaner in the process.
2014-07-24 Tom Tromey <tromey@redhat.com>
* maint.c (match_bfd_flags): Make "string" const.
(print_bfd_section_info): Remove casts.
(print_objfile_section_info): Make "string" const.
This commit adds a new category of internal problem for demangler
warnings. Demangler warnings behave in much the same way as internal
warnings except that they do not create core files and no option to
change this is presented to the user.
gdb/
2014-06-19 Gary Benson <gbenson@redhat.com>
* utils.h (demangler_vwarning): New declaration.
(demangler_warning): Likewise.
* utils.c (struct internal_problem)
<user_settable_should_quit>: New field.
<user_settable_should_dump_core>: Likewise
(internal_error_problem): Add values for above new fields.
(internal_warning_problem): Likewise.
(demangler_warning_problem): New static global.
(demangler_vwarning): New function.
(demangler_warning): Likewise.
(add_internal_problem_command): Selectively add commands.
(_initialize_utils): New internal problem command.
* maint.c (maintenance_demangler_warning): New function.
(_initialize_maint_cmds): New command.
gdb/doc/
2014-06-19 Gary Benson <gbenson@redhat.com>
* gdb.texinfo (Maintenance Commands): Document new
"maint demangler-warning" command and new
"maint set/show demangler-warning" option.
Currently there are many calls to help_list that pass the constant -1
as the "class" value. However, the parameter is declared as being of
type enum command_class, and uses of the constant violate this
abstraction.
This patch fixes the error everywhere it occurs in the gdb sources.
Tested by rebuilding.
2014-06-13 Tom Tromey <tromey@redhat.com>
* cp-support.c (maint_cplus_command): Pass all_commands, not -1,
to help_list.
* guile/guile.c (info_guile_command): Pass all_commands, not -1,
to help_list.
* tui/tui-win.c (tui_command): Pass all_commands, not -1, to
help_list.
* tui/tui-regs.c (tui_reg_command): Pass all_commands, not -1, to
help_list.Pass all_commands, not -1, to help_list.
* cli/cli-dump.c (dump_command, append_command)
(srec_dump_command, ihex_dump_command, tekhex_dump_command)
(binary_dump_command, binary_append_command): Pass all_commands,
not -1, to help_list.
* cli/cli-cmds.c (info_command, set_debug): Pass all_commands, not
-1, to help_list.
* valprint.c (set_print, set_print_raw): Pass all_commands, not
-1, to help_list.
* typeprint.c (set_print_type): Pass all_commands, not -1, to
help_list.
* top.c (set_history): Pass all_commands, not -1, to help_list.
* target-descriptions.c (set_tdesc_cmd, unset_tdesc_cmd): Pass
all_commands, not -1, to help_list.
* symfile.c (overlay_command): Pass all_commands, not -1, to
help_list.
* spu-tdep.c (info_spu_command): Pass all_commands, not -1, to
help_list.
* serial.c (serial_set_cmd): Pass all_commands, not -1, to
help_list.
* ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Pass all_commands, not
-1, to help_list.
* remote.c (remote_command, set_remote_cmd): Pass all_commands,
not -1, to help_list.
* ravenscar-thread.c (set_ravenscar_command): Pass all_commands,
not -1, to help_list.
* maint.c (maintenance_command, maintenance_info_command)
(maintenance_print_command, maintenance_set_cmd): Pass
all_commands, not -1, to help_list.
* macrocmd.c (macro_command): Pass all_commands, not -1, to
help_list.
* language.c (set_check): Pass all_commands, not -1, to help_list.
* infcmd.c (unset_command): Pass all_commands, not -1, to
help_list.
* frame.c (set_backtrace_cmd): Pass all_commands, not -1, to
help_list.
* dwarf2read.c (set_dwarf2_cmd): Pass all_commands, not -1, to
help_list.
* dcache.c (set_dcache_command): Pass all_commands, not -1, to
help_list.
* breakpoint.c (save_command): Pass all_commands, not -1, to
help_list.
* ada-lang.c (maint_set_ada_cmd, set_ada_command): Pass
all_commands, not -1, to help_list.
This changes various flags struct cmd_list_element into bitfields. In
general I think bitfields are cleaner than flag words, at least in a
case like this where there is no need to pass the flags around
independently of the enclosing struct.
2014-01-20 Tom Tromey <tromey@redhat.com>
* cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd)
(add_setshow_cmd_full, delete_cmd, lookup_cmd_1)
(deprecated_cmd_warning, complete_on_cmdlist): Update.
* cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER)
(MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove.
(struct cmd_list_element) <flags>: Remove.
<cmd_deprecated, deprecated_warn_user, malloced_replacement,
doc_allocated>: New fields.
<hook_in, allow_unknown, abbrev_flag, type, var_type>: Now
bitfields.
* maint.c (maintenance_do_deprecate): Update.
* top.c (execute_command): Update.
* NEWS: Add entry.
* event-top.c: #include "maint.h".
* main.c: #include "maint.h".
* maint.c: #include <sys/time.h>, <time.h>, block.h, top.h,
timeval-utils.h, maint.h, cli/cli-setshow.h.
(per_command_time, per_command_space): New static globals.
(per_command_symtab): New static global.
(per_command_setlist, per_command_showlist): New static globals.
(struct cmd_stats): Move here from utils.c.
(set_per_command_time): Renamed from set_display_time in utils.c
and moved here. All callers updated.
(set_per_command_space): Renamed from set_display_space in utils.c
and moved here. All callers updated.
(count_symtabs_and_blocks): New function.
(report_command_stats): Moved here from utils.c. Add support for
printing symtab stats. Only print data if enabled before command
executed.
(make_command_stats_cleanup): Ditto.
(sert_per_command_cmd, show_per_command_cmd): New functions.
(_initialize_maint_cmds): Add new commands
mt set per-command {space,time,symtab} {on,off}.
* maint.h: New file.
* top.c: #include "maint.h".
* utils.c (reset_prompt_for_continue_wait_time): New function.
(get_prompt_for_continue_wait_time): New function.
* utils.h (reset_prompt_for_continue_wait_time): Declare
(get_prompt_for_continue_wait_time): Declare.
(make_command_stats_cleanup): Moved to maint.h.
(set_display_time, set_display_space): Moved to maint.h and renamed
to set_per_command_time, set_per_command_space.
* cli/cli-setshow.c (parse_cli_boolean_value): Renamed from
parse_binary_operation and made non-static. Don't call error,
just return an error marker. All callers updated.
* cli/cli-setshow.h (parse_cli_boolean_value): Declare.
doc/
* gdb.texinfo (Maintenance Commands): Add docs for
"mt set per-command {space,time,symtab} {on,off}".
testsuite/
* gdb.base/maint.exp: Update tests for per-command stats.
(trace_pass_command): Likewise.
* cli/cli-cmds.c: Include cli/cli-utils.h.
(source_command): Use skip-spaces.
(disassemble_command): Likewise.
* findcmd.c: Include cli/cli-utils.h.
(parse_find_args): Use skip_spaces.
* go32-nat.c: Include cli/cli-utils.h.
(go32_sldt): Use skip_spaces.
(go32_sgdt): Likewise.
(go32_sidt): Likewise.
(go32_pde): Likewise.
(go32_pte): Likewise.
(go32_pte_for_address): Likewise.
* infcmd.c: Include cli/cli-utils.h.
(registers_info): Use skip_spaces.
* linux-tdep.c (read_mapping): Use skip_spaces_const.
(linux_info_proc): Likewise.
* linux-thread-db.c: Include cli/cli-utils.h.
(info_auto_load_libthread_db): Use skip_spaces_const.
* m32r-rom.c: Include cli/cli-utils.h.
(m32r_upload_command): Use skip_spaces.
* maint.c: Include cli/cli-utils.h.
(maintenance_translate_address): Use skip_spaces.
* mi/mi-parse.c: Include cli/cli-utils.h.
(mi_parse_argv): Use skip_spaces.
(mi_parse): Likewise.
* minsyms.c: Include cli/cli-utils.h.
(msymbol_hash_iw): Use skip_spaces_const.
* objc-lang.c: Include cli/cli-utils.h.
(parse_selector): Use skip_spaces.
(parse_method): Likewise.
* python/python.c: Include cli/cli-utils.h.
(python_interactive_command)[HAVE_PYTHON]: Use skip_spaces.
(python_command)[HAVE_PYTHON]: Likewise.
(python_interactive_command)[!HAVE_PYTHON]: Likewise.
* remote-m32r-sdi.c: Include cli/cli-utils.h.
(m32r_load): Use skip_spaces.
* serial.c: Include cli/cli-utils.h.
(serial_open): Use skip_spaces_const.
* stack.c: Include cli/cli-utils.h.
(parse_frame_specification_1): Use skip_spaces_const.
* symfile.c: Include cli/cli-utils.h.
(set_ext_lang_command): Use skip_spaces.
* symtab.c: Include cli/cli-utils.h.
(rbreak_command): Use skip_spaces.
* thread.c (thread_name_command): Use skip_spaces.
* tracepoint.c (validate_actionline): Use skip_spaces.
(encode_actions_1): Likewise.
(trace_find_range_command): Likewise.
(trace_find_outside_command): Likewise.
(trace_dump_actions): Likewise.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
2012-12-19 Yao Qi <yao@codesourcery.com>
* maint.c (maintenance_print_statistics): Make it static.
* symtab.h (maintenance_print_statistics): Remove declaration.
Simon Marchi