Add md_generic_table_relax_frag for TC_GENERIC_RELAX_TABLE targets so
that a backend can extend relax_frag beyond TC_GENERIC_RELAX_TABLE.
* write.c (md_generic_table_relax_frag): New. Defined to
relax_frag if not defined.
(relax_segment): Call md_generic_table_relax_frag instead of
relax_frag.
I'm currently studying that code and noticed this manual memory
management, which could easily be replaced with a vector, so here it is.
gdb/ChangeLog:
* jit.c (jit_reader_try_read_symtab): Replace xmalloc/xfree with
gdb::byte_vector.
I noticed a couple of spots that call malloc_failure, but that don't
need to.
* In xml-support.c, "concat" uses xmalloc, so cannot return NULL.
* In utils.c, "buildargv" also uses xmalloc, so can only return NULL
if the argument is empty.
Tested by the buildbot.
gdb/ChangeLog
2019-12-12 Tom Tromey <tromey@adacore.com>
* xml-support.c (xml_fetch_content_from_file): Don't call
malloc_failure.
* utils.h (class gdb_argv): Remove malloc_failure comment.
* utils.c (gdb_argv::reset): Don't call malloc_failure.
Change-Id: I59483620deb6609ccf2f024d94a29113bb62d1a9
This adds Ravenscar support to gdb for RISC-V targets.
This was tested internally using AdaCore's test suite and qemu.
gdb/ChangeLog
2019-12-12 Tom Tromey <tromey@adacore.com>
* Makefile.in (ALL_TARGET_OBS): Add riscv-ravenscar-thread.o.
(HFILES_NO_SRCDIR): Add riscv-ravenscar-thread.h.
(ALLDEPFILES): Add riscv-ravenscar-thread.c.
* configure.tgt (riscv-*-*): Add riscv-ravenscar-thread.o.
* riscv-ravenscar-thread.c: New file.
* riscv-ravenscar-thread.h: New file.
* riscv-tdep.c (riscv_gdbarch_init): Call
register_riscv_ravenscar_ops.
Change-Id: Ic47a3b3cfbbe80c2c82a5f48d2e0481845cac8b0
A recent commit removed DIAGNOSTIC_IGNORE_UNUSED_FUNCTION, which was
used in thread-pool.c. This patch changes this code to use
ATTRIBUTE_UNUSED instead.
Tested by rebuilding.
gdb/ChangeLog
2019-12-12 Tom Tromey <tromey@adacore.com>
* gdbsupport/thread-pool.c (set_thread_name): Use
ATTRIBUTE_UNUSED.
Change-Id: I56d46eaac73690565d0e52db1791411567a918dd
Attempting to build GDB in Ubuntu 16.04.6 LTS on x86_64, I ran into warnings
that caused the build to fail:
binutils-gdb/gdb/gdbsupport/safe-strerror.c:44:1: error: ‘char* select_strerror_r(char*, char*)’ defined but not used [-Werror=unused-function] select_strerror_r (char *res, char *)
The diagnostic macro DIAGNOSTIC_IGNORE_UNUSED_FUNCTION seems to expand
correctly to its respective pragma, but this doesn't seem to have an effect on
the warning. I tried to use the pragma explicitly and got the same result.
ATTRIBUTE_UNUSED works fine in this case if you put it in both functions,
which should fix warnings for both gdb and gdbserver builds.
The compiler version is gcc (Ubuntu 5.4.0-6ubuntu1~16.04.11) 5.4.0 20160609.
This is likely the result of PR64079 in GCC, which was fixed by commit
9e96f1e1b9731c4e1ef4fbbbf0997319973f0537.
To prevent other developers from attempting to use this macro, only to get
confused by it not working as expected, it seems better to not define this
particular macro.
gdb/ChangeLog:
2019-12-12 Luis Machado <luis.machado@linaro.org>
* gdbsupport/safe-strerror.c: Don't include diagnostics.h.
(select_strerror_r): Use ATTRIBUTE_UNUSED instead of the diagnostics
macros.
include/ChangeLog:
2019-12-12 Luis Machado <luis.machado@linaro.org>
* diagnostics.h (DIAGNOSTIC_IGNORE_UNUSED_FUNCTION). Remove
definitions.
Change-Id: Iad6123d61d76d111e3ef8d24aa8c60112304c749
This started out as fixing decode_16, which used a char to index a 256
byte decodings array. When char is signed that could result in an out
of bounds array access. The rest of the patch is for consistency and
just general cleanup.
* config/obj-evax.c (crc32, encode_32, encode_16, decode_16):
Remove unnecessary prototypes.
(number_of_codings): Delete, use ARRAY_SIZE instead throughout.
(codings, decodings): Make arrays of unsigned char.
(crc32): Use unsigned variables. Delete unnecessary mask.
(encode_32, encode_16): Return unsigned char*, and make static
buffer an unsigned char array.
(decode_16): Make arg an unsigned char*. Remove useless casts.
(shorten_identifier): Use unsigned char crc_chars.
(is_truncated_identifier): Make ptr an unsigned char*.
Testing on another TUI series showed that some of the regexps in the
TUI test suite have been incorrect for a while. In particular, "|"
was meant literally in these tests, but was interpreted as pattern
alternation due to lack of quoting.
This patch fixes the bad tests. I am checking this in.
gdb/testsuite/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* gdb.tui/resize.exp: Fix regexp.
* gdb.tui/regs.exp: Fix regexps.
* gdb.tui/main.exp: Fix regexp.
Change-Id: Ib6661361171ac120bb92f4a8aec7efa4bcaa36b9
The "winheight" command resizes a specified window, resizing the other
windows in the layout to adapt. In the current code, this is done by
examining each possible layout separately. The new layout code has a
more general approach to handling this, and this patch simply removes
the old code in favor of a call into the new layout engine.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-win.c (tui_set_win_height_command): Call
tui_adjust_window_height.
(tui_adjust_win_heights, new_height_ok): Remove.
* tui/tui-layout.h (tui_adjust_window_height): Declare.
* tui/tui-layout.c (tui_adjust_window_height): New function.
Change-Id: I6bb681375a46adc8d29fd06f581deed4e078e78a
The TUI has separate code for each possible layout to handle the case
where the terminal window is resized. With the new layout code, this
can all be replaced with a call to tui_apply_current_layout, which
simply re-applies the current layout.
This results in some small differences in behavior when resizing, so
some tests are updated.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-win.c (tui_resize_all): Remove code, call
tui_apply_current_layout.
gdb/testsuite/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* gdb.tui/resize.exp: Update.
* gdb.tui/empty.exp (layouts): Update.
Change-Id: I3dc6c02a753d495d9ab5e8213d550a147198ce6f
This patch introduces the first use of tui_layout, by changing
show_layout to clone and use the appropriate tui_layout.
This resulted in one minor layout change, and also in the unintended
-- but good -- side effect that the title of each boxed window is now
visible.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-layout.h (tui_apply_current_layout): Declare.
* tui/tui-layout.c (standard_layouts, applied_layout): New
globals.
(tui_apply_current_layout): New function.
(show_layout): Set applied_layout. Call
tui_apply_current_layout.
(show_source_command, show_disasm_command)
(show_source_disasm_command, show_data)
(show_source_or_disasm_and_command): Remove.
(initialize_layouts): New function.
(_initialize_tui_layout): Call initialize_layouts.
gdb/testsuite/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* gdb.tui/regs.exp: Update.
* gdb.tui/empty.exp (layouts): Update.
* gdb.tui/basic.exp: Update.
* lib/tuiterm.exp (_check_box): Don't check bottom border.
Change-Id: If1ee06ee58f4803e8c213f4ab0f5bb59f4650ec2
This introduces a new approach to window layout for the TUI. The idea
behind this code is that a layout should be specified in a declarative
way, and then be applied by generic code that does not need to know
the specifics of every possible layout.
This patch itself does not change any behavior, because the new layout
engine isn't yet connected to anything. That is, this merely
introduces the implementation.
This generic approach makes the code more maintainable. It also
enables some future changes:
* New window types are simpler to add;
* User-specified layouts are possible; and
* Horizontal layouts are more attainable
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-layout.h (class tui_layout_base)
(class tui_layout_window, class tui_layout_split): New.
* tui/tui-layout.c (tui_get_window_by_name)
(tui_layout_window::clone, tui_layout_window::apply)
(tui_layout_window::get_sizes, tui_layout_window::add_split)
(tui_layout_split::add_window, tui_layout_split::clone)
(tui_layout_split::get_sizes)
(tui_layout_split::set_weights_from_heights)
(tui_layout_split::adjust_size, tui_layout_split::apply): New
functions.
(tui_layout_split::add_split, tui_layout_split::add_split)
(tui_layout_split::set_weights_from_heights)
(tui_layout_split::set_weights_from_heights): New functions.
Change-Id: I3a4cae666327b617d862aaa356f8179f945c6a4e
struct tui_point does not help very much. It is only used for
storage, and never passed between functions. I think it makes the
code more verbose without any corresponding benefit, so this patch
removes it.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-wingeneral.c (tui_gen_win_info::make_window): Update.
* tui/tui-win.c (tui_adjust_win_heights, tui_resize_all): Update.
* tui/tui-layout.c (tui_gen_win_info::resize): Update.
* tui/tui-data.h (struct tui_point): Remove.
(struct tui_gen_win_info) <origin>: Remove.
<x, y>: New fields.
* tui/tui-command.c (tui_cmd_window::resize): Update.
Change-Id: I3f77920585b9ea9e2b4b189f3f3ae32d4da0c252
This introduces a new method, tui_gen_win_info::min_height, to fetch
the minimum height of a window. This is used in the subsequent
unified layout patch.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-stack.h (struct tui_locator_window) <min_height>:
Implement.
* tui/tui-regs.h (struct tui_data_item_window) <min_height>:
Implement.
* tui/tui-data.h (struct tui_gen_win_info) <min_height>: New
method.
(struct tui_win_info) <min_height>: Implement.
Change-Id: Id33baffdf041fde072e15c1ff89b75f8b8118adb
This moves the can_box method to tui_gen_win_info, so that it will be
available on the tui_locator_window class. This will be used in a
subsequent patch.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-data.h (struct tui_gen_win_info) <can_box>: New method.
(struct tui_win_info) <can_box>: Update.
Change-Id: Idfa58af41341607932d3c39415f6a35ee9b5d3dc
This moves the max_height method to tui_gen_win_info and implements it
in the subclasses. This is used by a subsequent patch, which will
normalize window layout across all window types.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-stack.h (struct tui_locator_window) <max_height>: New
method.
* tui/tui-regs.h (struct tui_data_item_window) <max_height>: New
method.
* tui/tui-data.h (struct tui_gen_win_info) <max_height>: New
method.
(struct tui_win_info) <max_height>: Now override.
Change-Id: I4ba3e8899bc4668328d3d78e3c1674c61882450d
Now that the GDB 9 branch has been created, we can
bump the version number.
gdb/ChangeLog:
GDB 9 branch created (27f7b2f640):
* version.in: Bump version to 10.0.50.DATE-git.
PR build/25268 points out that the build fails on macOS, because on
macOS the "pthread_setname_np" function takes a single argument.
This patch fixes the problem, by introducing a new adapter function
that handles both styles of pthread_setname_np.
This change also meant moving the pthread_setname_np call to the
thread function, because macOS only permits setting the name of the
current thread. This means that there can be a brief window when gdb
will see the wrong name; but I think this is a minor concern.
Tested by rebuilding on x86-64 Fedora 30, and on macOS High Sierra.
On Linux I also debugged gdb to ensure that the thread names are still
set correctly.
gdb/ChangeLog
2019-12-11 Tom Tromey <tromey@adacore.com>
PR build/25268:
* gdbsupport/thread-pool.c (set_thread_name): New function.
(thread_pool::set_thread_count): Don't call pthread_setname_np.
(thread_pool::thread_function): Call set_thread_name.
Change-Id: Id7bf28d99ca27a893a9fc87ebb90b15a9c2a9cb4
A recent commit changed bfd_get_signed_8 to extend the result to a
bfd_signed_vma. This caused a compiler error in one spot in my
--enable-targets=all gdb build, where the result of bfd_get_signed_8
was passed to printf.
This patch fixes the build. Tested by rebuilding.
gdb/ChangeLog
2019-12-11 Tom Tromey <tromey@adacore.com>
* fbsd-tdep.c (fbsd_core_info_proc_status): Cast result of
bfd_get_signed_8.
Change-Id: Ic015f5fd3d88da6b5da8f7b4e1d11d5c981333db
In ("x86: extend SSE check to PCLMULQDQ, AES, and GFNI insns") I went
both a little too far and not quite far enough:
- GFNI insns also have AVX512 variants, which also shouldn't get
diagnosed,
- SSE4a insns should get diagnosed just like SSE4.x ones,
- SHA insns should get diagnosed just like PCLMULQDQ or AES ones.
The option framework documentation was speaking about a 'print -raw'
option, but this option does not exist.
This patch implements -raw-values option that tells to ignore the
active pretty printers when printing a value.
As we already have -raw-frame-arguments, I thought -raw-values
was more clear, in particular to differentiate
set print raw-values and set print raw-frame-arguments.
gdb/doc/ChangeLog
2019-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Command Options): Use -p and -pretty in the example,
as -r is ambiguous. Update the print - TAB TAB completion result.
(Data): Document new option -raw-values. Use -p and -pretty in the
example, as -r is ambiguous.
(Print Settings): Document set print raw values.
(Pretty-Printer Commands): Document interaction between enabled
pretty printers and -raw-values/-raw-frame-arguments.
gdb/ChangeLog
2019-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS: Document -raw-values option and the related setting commands.
* printcmd.c (print_command_parse_format): Do not set opts->raw off,
only set it on when /r is given.
* valprint.c (value_print_option_defs): New element raw-values.
* Makefile.in: Add the new file.
gdb/testsuite/ChangeLog
2019-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/options.exp: Add -raw-values in the print completion list.
* gdb.python/py-prettyprint.exp: Add tests for -raw-values.
This is
*cst = (data[0] << 24) + (data[1] << 16) + (data[2] << 8) + data[3];
data is unsigned char which promotes to int.
* h8300-dis.c (extract_immediate): Avoid signed overflow.
(bfd_h8_disassemble): Likewise.
In the following buf is an unsigned char array, so elements are
promoted to int before arithmetic operations.
if (dis_info.info->endian == BFD_ENDIAN_BIG)
while (n--)
val |= buf[n] << (n*8);
else
for (i = 0; i < n; i++)
val |= buf[i] << (i*8);
* csky-dis.c (csky_chars_to_number): Rewrite. Avoid signed
overflow when collecting bytes of a number.
This was the following in print_with_operands
case 4:
number
= buffer[2] + buffer[3] * 256 + buffer[4] * 65536
+ buffer[5] * 0x1000000;
and buffer[5] * 0x1000000 can indeed overflow. So to fix this we need
to use unsigned arithmetic where overflow semantics are specified.
But number is a long, and the expression is int which will be sign
extended to long. If we make the expression unsigned it will be zero
extended. So make number an int32_t and rearrange a little for some
of the places that need fixing.
* cris-dis.c (print_with_operands): Avoid signed integer
overflow when collecting bytes of a 32-bit integer.
This was:
unsigned long mask = SBM (instruction->match_bits);
with
#define SBM(offs) ((((1 << (32 - offs)) -1) << (offs)))
Well, there are a couple of problems. Firstly, the expression uses
int values (1 rather than 1u or 1ul) resulting in the ubsan error, and
secondly, a zero offs will result in a 32-bit shift which is undefined
if ints are only 32 bits.
* cr16-dis.c (EXTRACT, SBM): Rewrite.
(cr16_match_opcode): Delete duplicate bcond test.
This was the following in fmtconst_val, x is unsigned int.
x = SIGNEXTEND (x, constant_formats[cf].nbits);
Problem is, the SIGNEXTEND macro assumed its arg was a long and sign
extended by shifting left then shifting right, and didn't cast the
arg. So don't do the silly shift thing. It's not guaranteed to work
anyway according to the C standard. ">>" might do a logical shift
even if its args are signed.
* bfin-dis.c (HOST_LONG_WORD_SIZE, XFIELD): Delete.
(SIGNBIT): New.
(MASKBITS, SIGNEXTEND): Rewrite.
(fmtconst): Don't use ? expression now that SIGNEXTEND uses
unsigned arithmetic, instead assign result of SIGNEXTEND back
to x.
(fmtconst_val): Use 1u in shift expression.
When operand->bits is 32, the following results in UB.
value = (insn >> operand->shift) & ((1 << operand->bits) - 1);
* arc-dis.c (find_format_from_table): Use ull constant when
shifting by up to 32.
Assembling this to an object and trying to disassemble results in
objdump -d looping forever.
.inst 0x45205120
PR 25270
* aarch64-dis.c (aarch64_decode_variant_using_iclass): Return
false when field is zero for sve_size_tsz_bhs.
H.J. Lu
Simon Marchi
Tom Tromey
Luis Machado
Alan Modra
Tom Tromey
GDB Administrator
Joel Brobecker
Simon Marchi
Andre Vieira
Jan Beulich
Philippe Waroquiers