Fix commit 70a38d42c5 ("New entry points for writing Linux NT_PRPSINFO
notes."), <https://sourceware.org/ml/binutils/2013-02/msg00023.html>,
and handle both variants of the 64-bit Linux core PRPSINFO note across
all targets.
The 64-bit Linux core PRPSINFO note matches the 64-bit kernel structure,
defined as follows:
(gdb) ptype struct elf_prpsinfo
type = struct elf_prpsinfo {
char pr_state;
char pr_sname;
char pr_zomb;
char pr_nice;
unsigned long pr_flag;
__kernel_uid_t pr_uid;
__kernel_gid_t pr_gid;
pid_t pr_pid;
pid_t pr_ppid;
pid_t pr_pgrp;
pid_t pr_sid;
char pr_fname[16];
char pr_psargs[80];
}
(gdb)
where the individual data types of most members are the same across all
64-bit Linux ports, with the exception of `__kernel_uid_t' and
`__kernel_gid_t'. These are defined in <asm-generic/posix_types.h> as
32-bit `unsigned int' by default, however overridden as 16-bit `unsigned
short' in port-specific <asm/posix_types.h> for the SuperH target.
The default is already handled, as from the commit referred. Add the
other variant then and provide a backend flag to switch between the two
cases possible, with the 32-bit one being the default and the 16-bit one
explicitly selected. Set the flag in the SuperH target backend. This
arrangement is analogous to how the 32-bit Linux core PRPSINFO note is
handled.
bfd/
* elf-bfd.h (elf_backend_data): Add `linux_prpsinfo64_ugid16'
member.
* elf-linux-core.h (elf_external_linux_prpsinfo64): Rename to...
(elf_external_linux_prpsinfo64_ugid32): ... this.
(swap_linux_prpsinfo32_out): Rename to...
(swap_linux_prpsinfo32_ugid32_out): ... this.
(elf_external_linux_prpsinfo64_ugid16): New structure.
(swap_linux_prpsinfo64_ugid16_out): New function.
* elfxx-target.h [!elf_backend_linux_prpsinfo64_ugid16]
(elf_backend_linux_prpsinfo64_ugid16): Define.
(elfNN_bed): Initialize `linux_prpsinfo64_ugid16' member.
* elf.c (elfcore_write_linux_prpsinfo64): Handle both variants
of the 64-bit Linux core PRPSINFO note.
* elf64-sh64.c (elf_backend_linux_prpsinfo64_ugid16): Define.
Fix commit 70a38d42c5 ("New entry points for writing Linux NT_PRPSINFO
notes."), <https://sourceware.org/ml/binutils/2013-02/msg00023.html>,
and commit b3ac9c7756 ("Put more info in NT_PRPSINFO Linux notes"),
<https://sourceware.org/ml/binutils/2013-02/msg00024.html>, and handle
both variants of the 32-bit Linux core PRPSINFO note across all targets.
The 32-bit Linux core PRPSINFO note matches the 32-bit kernel structure,
defined as follows:
(gdb) ptype struct elf_prpsinfo
type = struct elf_prpsinfo {
char pr_state;
char pr_sname;
char pr_zomb;
char pr_nice;
unsigned long pr_flag;
__kernel_uid_t pr_uid;
__kernel_gid_t pr_gid;
pid_t pr_pid;
pid_t pr_ppid;
pid_t pr_pgrp;
pid_t pr_sid;
char pr_fname[16];
char pr_psargs[80];
}
(gdb)
where the individual data types of most members are the same across all
32-bit Linux ports, with the exception of `__kernel_uid_t' and
`__kernel_gid_t'. These are defined in <asm-generic/posix_types.h> as
32-bit `unsigned int' by default, however overridden as 16-bit `unsigned
short' in port-specific <asm/posix_types.h> for a few targets, mostly
earlier ports of Linux, specifically: ARM, CRIS, FR-V, M32R, m68k,
MN10300/AM33, s390, SuperH, SPARC and i386.
The default is the same as the PowerPC variant already handled, as from
the commits referred. Make the special PowerPC case generic then,
removing the GDB part, and provide a backend flag to switch between the
two cases possible, with the 32-bit one being the default and the 16-bit
one explicitly selected. Set the flag in the target backends affected.
bfd/
* elf-bfd.h (elf_backend_data): Add `linux_prpsinfo32_ugid16'
member.
(elfcore_write_ppc_linux_prpsinfo32): Remove prototype.
* elf32-ppc.c (elfcore_write_ppc_linux_prpsinfo32): Remove.
(elf_external_ppc_linux_prpsinfo32)
(swap_ppc_linux_prpsinfo32_out): Move to...
* elf-linux-core.h (elf_external_linux_prpsinfo32_ugid32)
(swap_linux_prpsinfo32_ugid32_out): ... these.
(elf_external_linux_prpsinfo32): Rename to...
(elf_external_linux_prpsinfo32_ugid16): ... this.
(swap_linux_prpsinfo32_out): Rename to...
(swap_linux_prpsinfo32_ugid16_out): ... this.
* elfxx-target.h [!elf_backend_linux_prpsinfo32_ugid16]
(elf_backend_linux_prpsinfo32_ugid16): Define.
(elfNN_bed): Initialize `linux_prpsinfo32_ugid16' member.
* elf.c (elfcore_write_linux_prpsinfo32): Handle both variants
of the 32-bit Linux core PRPSINFO note.
* elf32-am33lin.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-arm.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-cris.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-frv.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-i386.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-m32r.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-m68k.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-s390.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-sh.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-sparc.c (elf_backend_linux_prpsinfo32_ugid16): Define.
gdb/
* ppc-linux-tdep.c (ppc_linux_init_abi): Remove call to
`set_gdbarch_elfcore_write_linux_prpsinfo'.
Add a new ELF backend method to grok FreeBSD NT_PRSTATUS core dump
notes. Define a method for MIPS N32 to override the default
elfcore_grok_freebsd_prstatus that accounts for additional padding
between pr_pid and pr_reg that is not present in other 32-bit FreeBSD
platforms.
* elf-bfd.h (struct elf_backend_data): Add
`elf_backend_grok_freebsd_prstatus'.
* elf.c (elfcore_grok_freebsd_note): Call
`elf_backend_grok_freebsd_prstatus' to handle NT_PRSTATUS if
present.
* elfn32-mips.c (elf_n32_mips_grok_freebsd_prstatus): New
function.
(elf_backend_grok_freebsd_prstatus): Define.
* elfxx-target.h (elf_backend_grok_freebsd_prstatus): Define.
(elfNN_bed): Initialize `elf_backend_grok_freebsd_prstatus'.
This fixes a wart I've known about for years, but haven't done
anything about because BFD treats relocation sections as an adjunct to
the section they relocate. SHF_GROUP on the section thus implicitly
applies to its relocation section(s), but it is an error that the
reloc sections aren't part of the group.
Like many patches to gas, this wasn't as straightforward as it could
be due to a number of backends, i386, cr16 and others, removing relocs
in tc_get_reloc rather than marking them as "done" earlier in
md_apply_reloc. So it isn't possible for the group support to
reliably detect the presence of relocs by looking at fixups earlier
than write_relocs. However the group support needs to create
signature symbols, and that must be done before the symbol table is
frozen, before write_relocs. So split off the group sizing from
elf_adjust_symtab and put it in elf_frob_file_after_relocs.
bfd/
PR 21167
* elf.c (_bfd_elf_setup_sections): Don't trim reloc sections from
groups.
(_bfd_elf_init_reloc_shdr): Pass sec_hdr, use it to copy SHF_GROUP
flag from section.
(elf_fake_sections): Adjust calls. Exit immediately on failure.
(bfd_elf_set_group_contents): Add associated reloc section indices
to group contents
gas/
PR 21167
* config/obj-elf.c (struct group_list): Delete elt_count.
(groups): New static.
(build_group_lists): Don't count elements.
(elf_adjust_symtab): Use groups rather than auto list. Set up
pointer from group member to SHT_GROUP section. Don't size
SHT_GROUP section or clean up here..
(elf_frob_file_after_relocs): ..do so here instead.
* testsuite/gas/arc/jli-1.d,
* testsuite/gas/elf/groupautob.d,
* testsuite/gas/mips/compact-eh-eb-2.d,
* testsuite/gas/mips/compact-eh-eb-5.d,
* testsuite/gas/mips/compact-eh-el-2.d,
* testsuite/gas/mips/compact-eh-el-5.d: Adjust.
ld/
PR 21167
* testsuite/ld-elf/group9b.d: Adjust for relocs included in group.
The sanity check covers the previous minimim size, plus that the size
is at least enough for sh_info verneed entries.
Also, since we write all verneed fields or exit with an error, there
isn't any need to zero the memory allocated for verneed entries.
PR 22166
* elf.c (_bfd_elf_slurp_version_tables): Test sh_info on
SHT_GNU_verneed section for sanity. Don't zalloc memory for
verref.
Fix two typos that resulted in swapping the BFD names for the core note
register sections NT_S390_GS_CB and NT_S390_GS_BC.
bfd/ChangeLog:
* elf.c (elfcore_grok_note): For the cases NT_S390_GS_CB and
NT_S390_GS_BC, correct the previously swapped invocations of
elfcore_grok_s390_gs_bc and elfcore_grok_s390_gs_cb.
PR 21916
* elf-attrs.c (_bfd_elf_parse_attributes): Complain about very
small section lengths.
* elf.c (_bfd_elf_setup_sections): Skip empty entries in the group
table.
(elfcore_grok_freebsd_prstatus): Add checks to make sure that
there is enough data present in the note.
One way to print 64-bit bfd_vma or bfd_size_type values on 32-bit
hosts is to cast the value to long long and use the 'll' modifier in
printf format strings. However, that's awkward because we also
support the Microsoft C library printf that uses 'I64' as a modifier
instead, and having variants of translated strings would not endear us
to the translation project. So, rewrite the 'll' modifier in
_doprint for Microsoft. Even with that capability it's not so nice
for 32-bit code to need casts to long long, so this patch makes 'L' a
modifier for bfd_vma rather than an alias for 'll'.
I've then used the new 'L' modifier to fix selected format strings.
* bfd.c (_doprnt): Rewrite "ll" and "L" modifiers to "I64" for
__MSVCRT__. Support "L" modifier for bfd_vma. Formatting.
* elf.c (setup_group): Use "Lx" to print sh_size.
(_bfd_elf_setup_sections): Remove unnecessary cast and print
unknown section type in hex.
(copy_special_section_fields): Style fix.
(bfd_section_from_shdr): Correct format for sh_link. Use a
common error message for all the variants of unrecognized
section types.
(assign_file_positions_for_load_sections): Use "Lx" for lma
adjust error message.
(assign_file_positions_for_non_load_sections): Formatting.
(rewrite_elf_program_header): Formatting. Use "Lx" for
bfd_vma values in error messages.
* elfcode.h (elf_slurp_reloc_table_from_section): Cast
ELF_R_SYM value to type expected by format.
* elflink.c (elf_link_read_relocs_from_section): Use "Lx"
in error messages.
(elf_link_add_object_symbols): Use "Lu" for symbol sizes.
(elf_link_input_bfd): Use "Lx" for r_info.
(bfd_elf_gc_record_vtinherit): Use "Lx" for offset.
Newer Linux kernel versions offer two new register sets in support of the
z/Architecture's guarded storage facility: NT_S390_GS_CB, the
"guarded-storage registers", and NT_S390_GS_BC, the "guarded-storage
broadcast control block". This patch adds support for the respective core
notes sections to binutils.
bfd/ChangeLog:
* elf-bfd.h (elfcore_write_s390_gs_cb): Add prototype.
(elfcore_write_s390_gs_bc): Likewise.
* elf.c (elfcore_grok_s390_gs_cb): New function.
(elfcore_grok_s390_gs_bc): New function.
(elfcore_grok_note): Call them.
(elfcore_write_s390_gs_cb): New function.
(elfcore_write_s390_gs_bc): New function.
(elfcore_write_register_note): Call them.
binutils/ChangeLog:
* readelf.c (get_note_type): Add NT_S390_GS_CB and NT_S390_GS_BC.
include/ChangeLog:
* elf/common.h (NT_S390_GS_CB): New macro.
(NT_S390_GS_BC): Likewise.
The out-of-bounds access is reproducible on 'ia64-strip' command
(see sample from https://bugs.gentoo.org/show_bug.cgi?id=622500)
The output file contains less section than original one.
This tricks 'hint' access to go out-of-bounds:
* elf.c (find_link): Bounds check "hint".
PR binutils/21640
* elf.c (setup_group): Zero the group section pointer list after
allocation so that loops can be caught. Check for NULL pointers
when processing a group list.
GAS always places section groups (SHT_GROUP) before the rest of the
sections in the output file. However, other assemblers may place
section groups after the group members.
This patch fixes handlign such situations, and removes some duplicated
logic.
bfd/ChangeLog:
2017-06-06 Jose E. Marchesi <jose.marchesi@oracle.com>
* elf.c (setup_group): Make sure BFD sections are created for all
group sections in the input file when processing SHF_GROUP
sections.
(bfd_section_from_shdr): Avoid duplicating logic already
implemented in `setup_group'.
This commit adds a new linker feature: the ability to resolve section
groups as part of a relocatable link.
Currently section groups are automatically resolved when performing a
final link, and are carried through when performing a relocatable link.
By carried through this means that one copy of each section group (from
all the copies that might be found in all the input files) is placed
into the output file. Sections that are part of a section group will
not match input section specifiers within a linker script and are
forcibly kept as separate sections.
There is a slight resemblance between section groups and common
section. Like section groups, common sections are carried through when
performing a relocatable link, and resolved (allocated actual space)
only at final link time.
However, with common sections there is an ability to force the linker to
allocate space for the common sections when performing a relocatable
link, there's currently no such ability for section groups.
This commit adds such a mechanism. This new facility can be accessed in
two ways, first there's a command line switch --force-group-allocation,
second, there's a new linker script command FORCE_GROUP_ALLOCATION. If
one of these is used when performing a relocatable link then the linker
will resolve the section groups as though it were performing a final
link, the section group will be deleted, and the members of the group
will be placed like normal input sections. If there are multiple copies
of the group (from multiple input files) then only one copy of the group
members will be placed, the duplicate copies will be discarded.
Unlike common sections that have the --no-define-common command line
flag, and INHIBIT_COMMON_ALLOCATION linker script command there is no
way to prevent group resolution during a final link, this is because the
ELF gABI specifically prohibits the presence of SHT_GROUP sections in a
fully linked executable. However, the code as written should make
adding such a feature trivial, setting the new resolve_section_groups
flag to false during a final link should work as you'd expect.
bfd/ChangeLog:
* elf.c (_bfd_elf_make_section_from_shdr): Don't initially mark
SEC_GROUP sections as SEC_EXCLUDE.
(bfd_elf_set_group_contents): Replace use of abort with an assert.
(assign_section_numbers): Use resolve_section_groups flag instead
of relocatable link type.
(_bfd_elf_init_private_section_data): Use resolve_section_groups
flag instead of checking the final_link flag for part of the
checks in here. Fix white space as a result.
* elflink.c (elf_link_input_bfd): Use resolve_section_groups flag
instead of relocatable link type.
(bfd_elf_final_link): Likewise.
include/ChangeLog:
* bfdlink.h (struct bfd_link_info): Add new resolve_section_groups
flag.
ld/ChangeLog:
* ld.h (struct args_type): Add force_group_allocation field.
* ldgram.y: Add support for FORCE_GROUP_ALLOCATION.
* ldlex.h: Likewise.
* ldlex.l: Likewise.
* lexsup.c: Likewise.
* ldlang.c (unique_section_p): Check resolve_section_groups flag
not the relaxable link flag.
(lang_add_section): Discard section groups when we're resolving
groups. Clear the SEC_LINK_ONCE flag if we're resolving section
groups.
* ldmain.c (main): Initialise resolve_section_groups flag in
link_info based on command line flags.
* testsuite/ld-elf/group11.d: New file.
* testsuite/ld-elf/group12.d: New file.
* testsuite/ld-elf/group12.ld: New file.
* NEWS: Mention new features.
* ld.texinfo (Options): Document --force-group-allocation.
(Miscellaneous Commands): Document FORCE_GROUP_ALLOCATION.
Correct a commit e5713223cb ("MIPS/BFD: For n64 hold the number of
internal relocs in `->reloc_count'") regression and change internal
relocation handling in the generic ELF BFD linker code such that, except
in the presence of R_SPARC_OLO10 relocations, a section's `reloc_count'
holds the number of internal rather than external relocations, making
the handling more consistent between GAS, which sets `->reloc_count'
with a call to `bfd_set_reloc', and LD, which sets `->reloc_count' as it
reads input sections.
The handling of dynamic relocations remains unchanged and they continue
holding the number of external relocations in `->reloc_count'; they are
also not converted to the internal form except in `elf_link_sort_relocs'
(which does not handle the general, i.e. non-n64-MIPS case of composed
relocations correctly as per the ELF gABI, though it does not seem to
matter for the targets we currently support).
The n64 MIPS backend is the only one with `int_rels_per_ext_rel' set to
non-one, and consequently the change is trivial for all the remaining
backends and targets.
bfd/
* elf-bfd.h (RELOC_AGAINST_DISCARDED_SECTION): Subtract `count'
from `reloc_count' rather than decrementing it.
* elf.c (bfd_section_from_shdr): Multiply the adjustment to
`reloc_count' by `int_rels_per_ext_rel'.
* elf32-score.c (score_elf_final_link_relocate): Do not multiply
`reloc_count' by `int_rels_per_ext_rel' for last relocation
entry determination.
(s3_bfd_score_elf_check_relocs): Likewise.
* elf32-score7.c (score_elf_final_link_relocate): Likewise.
(s7_bfd_score_elf_relocate_section): Likewise.
(s7_bfd_score_elf_check_relocs): Likewise.
* elf64-mips.c (mips_elf64_get_reloc_upper_bound): Remove
prototype and function.
(mips_elf64_slurp_one_reloc_table): Do not update `reloc_count'.
(mips_elf64_slurp_reloc_table): Assert that `reloc_count' is
triple rather than once the sum of REL and RELA relocation entry
counts.
(bfd_elf64_get_reloc_upper_bound): Remove macro.
* elflink.c (_bfd_elf_link_read_relocs): Do not multiply
`reloc_count' by `int_rels_per_ext_rel' for internal relocation
storage allocation size determination.
(elf_link_input_bfd): Multiply `.ctors' and `.dtors' section's
size by `int_rels_per_ext_rel'. Do not multiply `reloc_count'
by `int_rels_per_ext_rel' for last relocation entry
determination.
(bfd_elf_final_link): Do not multiply `reloc_count' by
`int_rels_per_ext_rel' for internal relocation storage
allocation size determination.
(init_reloc_cookie_rels): Do not multiply `reloc_count' by
`int_rels_per_ext_rel' for last relocation entry determination.
(elf_gc_smash_unused_vtentry_relocs): Likewise.
* elfxx-mips.c (_bfd_mips_elf_check_relocs): Likewise.
(_bfd_mips_elf_relocate_section): Likewise.
FreeBSD ELF cores contain data structures with that have two different
layouts: one for ILP32 platforms and a second for LP64 platforms.
Previously, the code used 'bits_per_word' from 'arch_info', but this
field is not a reliable indicator of the format for FreeBSD MIPS cores
in particular.
I had originally posted this patch back in November because process
cores for FreeBSD MIPS contained an e_flags value of 0 in the header
which resulted in a bfd_arch which always had 'bits_per_word' set to
32. This permitted reading o32 cores, but not n64 cores. The feedback
I received then was to try to change n64 cores to use a different
default bfd_arch that had a 64-bit 'bits_per_word' when e_flags was zero.
I submitted a patch to that effect but it was never approved. Instead,
I changed FreeBSD's kernel and gcore commands to preserve the e_flags
field from an executable when generating process cores. With a proper
e_flags field in process cores, n64 cores now use a 64-bit bfd_arch and
now work fine. However, the change to include e_flags in the process
cores had the unintended side effect of breaking handling of o32
process cores. Specifically, FreeBSD MIPS builds o32 with a default
MIPS architecture of 'mips3', thus FreeBSD process cores with a non-zero
e_flags match the 'mips3' bfd_arch which has 64 'bits_per_word'.
From this, it seems that 'bits_per_word' for FreeBSD MIPS is not likely
to ever be completely correct. However, FreeBSD core dumps do
reliably set the ELF class to ELFCLASS32 for cores using ILP32 and
ELFCLASS64 for cores using LP64. As such, I think my original patch of
using the ELF class instead of 'bits_per_word' is probably the simplest
and most reliable approach for detecting the note structure layout.
bfd/ChangeLog:
* elf.c (elfcore_grok_freebsd_psinfo): Use ELF header class to
determine structure sizes.
(elfcore_grok_freebsd_prstatus): Likewise.
This patch fixes an assumption made by code that runs for objcopy and
strip, that SHT_REL/SHR_RELA sections are always named starting with a
.rel/.rela prefix. I'm also modifying the interface for
elf_backend_get_reloc_section, so any backend function just needs to
handle name mapping.
PR 21412
* elf-bfd.h (struct elf_backend_data <get_reloc_section>): Change
parameters and comment.
(_bfd_elf_get_reloc_section): Delete.
(_bfd_elf_plt_get_reloc_section): Declare.
* elf.c (_bfd_elf_plt_get_reloc_section, elf_get_reloc_section):
New functions. Don't blindly skip over assumed .rel/.rela prefix.
Extracted from..
(_bfd_elf_get_reloc_section): ..here. Delete.
(assign_section_numbers): Call elf_get_reloc_section.
* elf64-ppc.c (elf_backend_get_reloc_section): Define.
* elfxx-target.h (elf_backend_get_reloc_section): Update.
Not a comprehensive change, just some split out from fixes made for
the %A and %B changes.
* coffcode.h: Wrap some overly long _bfd_error_handler args.
* elf.c: Likewise.
* elf32-arm.c: Likewise.
* elf32-i386.c: Likewise.
* elf32-mep.c: Likewise.
* elf64-ia64-vms.c: Likewise.
* elf64-x86-64.c: Likewise.
* elflink.c: Likewise.
* elfnn-ia64.c: Likewise.
* elfxx-mips.c: Likewise.
This steals _doprnt from libiberty, extended to handle %A and %B.
Which lets us do away with the current horrible %A and %B handling
that requires all %A and %B arguments to be passed first, rather than
in the natural order.
* bfd.c (PRINT_TYPE): Define.
(_doprnt): New function.
(error_handler_internal): Use _doprnt.
* coff-arm.c: Put %A and %B arguments to _bfd_error_handler
calls in their natural order, throughout file.
* coff-mcore.c: Likewise.
* coff-ppc.c: Likewise.
* coff-tic80.c: Likewise.
* cofflink.c: Likewise.
* elf-s390-common.c: Likewise.
* elf.c: Likewise.
* elf32-arm.c: Likewise.
* elf32-i386.c: Likewise.
* elf32-m32r.c: Likewise.
* elf32-msp430.c: Likewise.
* elf32-spu.c: Likewise.
* elf64-ia64-vms.c: Likewise.
* elf64-sparc.c: Likewise.
* elf64-x86-64.c: Likewise.
* elflink.c: Likewise.
* elfnn-aarch64.c: Likewise.
* elfnn-ia64.c: Likewise.
* elfxx-mips.c: Likewise.
PR21287 notes that .init_array is correctly given a type of
SHT_INIT_ARRAY while .init_array.nnn gets SHT_PROGBITS. This patch
fixes that problem, and properly drops warnings from the compiler that
would cause the testsuite to fail. My a44d0bd78 change to check
ld_compile status, necessary to pick up compile errors, also meant
warnings were not ignored.
bfd/
PR 21287
* elf.c (special_sections_f): Match .fini_array and .fini_array.*.
(special_sections_i): Likewise for .init_array.
(special_sections_p): Likewise for .preinit_array.
ld/
PR 21287
* testsuite/ld-elf/init-fini-arrays.d: Match INIT_ARRAY and FINI_ARRAY.
* testsuite/ld-elf/init-fini-arrays.s: Use %init_array and %fini_array
section types.
* testsuite/lib/ld-lib.exp (default_ld_compile): Trim assembler
warnings about "ignoring incorrect section type".
(run_ld_link_exec_tests, run_cc_link_tests): Delete old comment.
Mark an ALLOC section, which should be placed in special memory area,
with SHF_GNU_MBIND. Its sh_info field indicates the special memory
type. GNU_MBIND section names start with ".mbind" so that they are
placed as orphan sections by linker. All input GNU_MBIND sections
with the same sh_type, sh_flags and sh_info are placed in one output
GNU_MBIND section. In executable and shared object, create a
GNU_MBIND segment for each GNU_MBIND section and its segment type is
PT_GNU_MBIND_LO plus the sh_info value. Each GNU_MBIND segment is
aligned at page boundary.
The assembler syntax:
.section .mbind.foo,"adx",%progbits
^ 0: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.foo,"adx",%progbits,0x1
^ 1: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.bar,"adG",%progbits,.foo_group,comdat,0x2
^ 2: Special memory type.
|
'd' for SHF_GNU_MBIND.
bfd/
* elf.c (get_program_header_size): Add a GNU_MBIND segment for
each GNU_MBIND section and align GNU_MBIND section to page size.
(_bfd_elf_map_sections_to_segments): Create a GNU_MBIND
segment for each GNU_MBIND section.
(_bfd_elf_init_private_section_data): Copy sh_info from input
for GNU_MBIND section.
binutils/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* readelf.c (get_segment_type): Handle PT_GNU_MBIND_XXX.
(get_elf_section_flags): Handle SHF_GNU_MBIND.
(process_section_headers): Likewise.
* testsuite/binutils-all/mbind1.s: New file.
* testsuite/binutils-all/objcopy.exp: Run readelf test on
mbind1.s.
gas/
* NEWS: Mention support for ELF SHF_GNU_MBIND.
* config/obj-elf.c (section_match): New.
(get_section): Match both sh_info and group name.
(obj_elf_change_section): Add argument for sh_info. Pass both
sh_info and group name to get_section. Issue an error for
SHF_GNU_MBIND section without SHF_ALLOC. Set sh_info.
(obj_elf_parse_section_letters): Set SHF_GNU_MBIND for 'd'.
(obj_elf_section): Support SHF_GNU_MBIND section info.
* config/obj-elf.h (obj_elf_change_section): Add argument for
sh_info.
* config/tc-arm.c (start_unwind_section): Pass 0 as sh_info to
obj_elf_change_section.
* config/tc-ia64.c (obj_elf_vms_common): Likewise.
* config/tc-microblaze.c (microblaze_s_data): Likewise.
(microblaze_s_sdata): Likewise.
(microblaze_s_rdata): Likewise.
(microblaze_s_bss): Likewise.
* config/tc-mips.c (s_change_section): Likewise.
* config/tc-msp430.c (msp430_profiler): Likewise.
* config/tc-rx.c (parse_rx_section): Likewise.
* config/tc-tic6x.c (tic6x_start_unwind_section): Likewise.
* doc/as.texinfo: Document 'd' for SHF_GNU_MBIND.
* testsuite/gas/elf/elf.exp: Run section12a, section12b and
section13.
* testsuite/gas/elf/section10.d: Updated.
* testsuite/gas/elf/section10.s: Likewise.
* testsuite/gas/elf/section12.s: New file.
* testsuite/gas/elf/section12a.d: Likewise.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section13.l: Likewise.
* testsuite/gas/elf/section13.d: Likewise.
* testsuite/gas/elf/section13.s: Likewise.
include/
* elf/common.h (PT_GNU_MBIND_NUM): New.
(PT_GNU_MBIND_LO): Likewise.
(PT_GNU_MBIND_HI): Likewise.
(SHF_GNU_MBIND): Likewise.
ld/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Place
input GNU_MBIND sections with the same type, attributes and
sh_info field into a single output GNU_MBIND section.
* testsuite/ld-elf/elf.exp: Run mbind2a and mbind2b.
* testsuite/ld-elf/mbind1.s: New file.
* testsuite/ld-elf/mbind1a.d: Likewise.
* testsuite/ld-elf/mbind1b.d: Likewise.
* testsuite/ld-elf/mbind1c.d: Likewise.
* testsuite/ld-elf/mbind2a.s: Likewise.
* testsuite/ld-elf/mbind2b.c: Likewise.
I misunderstood the hppa alias problem. File offsets of segments need
to be such that no page is mapped twice with different permissions.
(Which still seems to me like something the kernel could fix, but
anyhow, this is not so difficult to achieve in ld.)
PR 21000
bfd/
* elf-bfd.h (struct elf_backend_data): Add no_page_alias.
* elfxx-target.h (elf_backend_no_page_alias): Define.
(elfNN_bed): Init new field.
* elf.c (assign_file_positions_for_load_sections): If no_page_alias
ensure PT_LOAD segment starts on a new page.
* elf32-hppa.c (elf_backend_no_page_alias): Define.
ld/
* testsuite/ld-elf/loadaddr1.d: Adjust for hppa file offsets.
* testsuite/ld-elf/loadaddr2.d: Likewise.
* testsuite/ld-elf/loadaddr3a.d: Likewise.
* testsuite/ld-scripts/rgn-at5.d: Likewise.
_bfd_elf_make_section_from_shdr calls elf_parse_notes with an offset
of -1. This argument is used to calculate Elf_Internal_Note.descpos,
which ends up set to a positive but meaningless value. This commit
updates _bfd_elf_make_section_from_shdr to pass the correct offset to
elf_parse_notes, making Elf_Internal_Note.descpos correct in all cases.
bfd/ChangeLog:
* elf.c (_bfd_elf_make_section_from_shdr): Pass offset to
elf_parse_notes.
PR ld/20815
bfd * elf.c (elf_modify_segment_map): Allow empty LOAD segments if
they contain the program headers.
(_bfd_elf_map_sections_to_segments): If the linker created the
PHDR segment then always attempt to include it in a LOAD segment.
(assign_file_positions_for_non_load_sections): Allow LOAD segments
to overlap PHDR segments.
(phdr_sorter): New function. Sorts program headers.
(assign_file_positions_except_relocs): Sort the program headers
before writing them out. Issue an error if the PHDR segment is
not covered by a LOAD segment, unless the backend allows it.
* elf-bfd.h (struct elf_backend_data): Add
elf_backend_allow_non_load_phdr.
* elfxx-target.h (elf_backend_allow_non_load_phdr): Provide
default definition that returns FALSE.
(elfNN_bed): Initialise the elf_backend_allow_non_load_phdr
field.
* elf64-hppa.c (elf64_hppa_allow_non_load_phdr): New function.
Returns TRUE.
(elf_backend_allow_non_load_phdr): Define.
* elf-m10300.c (_bfd_mn10300_elf_size_dynamic_sections): Do not
place the interpreter string into the .interp section if the
nointerp flag is set in the link info structure.
* elf32-arc.c (elf_arc_size_dynamic_sections): Likewise.
* elf32-score7.c (score_elf_final_link_relocate): Allow for the
_gp symbol not being part of the output.
binutils* readelf.c (process_program_headers): Check PT_LOAD and PT_PHDR
segments for validity.
ld * ld.texinfo: Note that PT_TLS can be used as a segment type.
* testsuite/ld-discard/discard.ld: Add space for program headers.
* testsuite/ld-elf/flags1.ld: Likewise.
* testsuite/ld-elf/maxpage3.t: Likewise.
* testsuite/ld-elf/noload-1.t: Likewise.
* testsuite/ld-elf/orphan.ld: Likewise.
* testsuite/ld-elf/overlay.t: Likewise.
* testsuite/ld-elf/pr14052.t: Likewise.
* testsuite/ld-elf/pr19539.t: Likewise.
* testsuite/ld-elf/provide-hidden-1.ld: Likewise.
* testsuite/ld-elf/provide-hidden-s.ld: Likewise.
* testsuite/ld-elf/weak-dyn-1.ld: Likewise.
* testsuite/ld-i386/pr19539.t: Likewise.
* testsuite/ld-scripts/defined.t: Likewise.
* testsuite/ld-scripts/defined6.t: Likewise.
* testsuite/ld-scripts/dynamic-sections.t: Likewise.
* testsuite/ld-scripts/empty-aligned.t: Likewise.
* testsuite/ld-scripts/provide-2.t: Likewise.
* testsuite/ld-scripts/provide-4.t: Likewise.
* testsuite/ld-vax-elf/plt-local.ld: Likewise.
* testsuite/ld-x86-64/pr19539.t: Likewise.
* testsuite/ld-elf/ehdr_start-missing.d: Do not initialise the
dynamic linker.
* testsuite/ld-elf/ehdr_start-weak.d: Likewise.
* testsuite/ld-elf/elf.exp (pr14170, pr17068): Likewise.
* testsuite/ld-elf/loadaddr1.d: Update expected readelf output.
* testsuite/ld-elf/noload-2.d: Likewise.
* testsuite/ld-powerpc/vxworks2.sd: Likewise.
* testsuite/ld-scripts/phdrs3a.d: Likewise.
* testsuite/ld-scripts/size-2.d: Likewise.
* testsuite/ld-elf/group.ld: Add program headers.
* testsuite/ld-elf/overlay.d: Skip for SPU.
* testsuite/ld-elf/flags1.d: Skip for RX.
* testsuite/ld-elf/pr19162.d: Skip for HPPA64.
* testsuite/ld-elf/pr19539.d: Skip for ALPHA.
* testsuite/ld-scripts/empty-orphan.t: Update program headers.
* testsuite/ld-scripts/size-2.t: Likewise.
bfd/
* elf.c (_bfd_elf_filter_global_symbols): Skip local symbols.
(swap_out_syms): Return an error when not finding ELF output
section rather than asserting.
* elflink.c (elf_output_implib): Call bfd_set_error on no symbols.
ld/
* testsuite/lib/ld-lib.exp (run_ld_link_tests): Add optional
parameter to pass list of xfails.
* testsuite/ld-elf/elf.exp: Add xfails for implib tests. Tidy
implib test formatting. Don't set .data start address.
* testsuite/ld-elf/implib.s: Remove first .bss directive and
replace second one with equivalent .section directive.
* testsuite/ld-elf/empty-implib.out: Add expected final error.
* testsuite/ld-elf/implib.rd: Update.
Version 1a adds a pr_pid member containing the process ID of the
terminating process. The presence of pr_pid is inferred from the
note's size.
bfd/ChangeLog:
* elf.c (elfcore_grok_freebsd_psinfo): Check for minimum note size
and handle pr_pid if present.
Issue an error if p_paddr becomes invalid when allocating space for
program headers.
PR ld/20376
* elf.c (assign_file_positions_for_load_sections): Also check
p_paddr for program header space.
The procstat AUXV core dump note in FreeBSD consists of 32-bit integer
followed by an array of auxiliary vector entries.
bfd/ChangeLog:
* elf.c (elfcore_grok_freebsd_note): Handle NT_FREEBSD_PROCSTAT_AUXV
notes.
Maciej W. Rozycki
John Baldwin
Alan Modra
Andreas Arnez
Nick Clifton
Yuri Chornovian
Sergei Trofimovich
Jose E. Marchesi
Andrew Burgess
H.J. Lu
Gary Benson
Thomas Preud'homme