* utils.c (streq): New function.
* dwarf2read.c (new_symbol): Use SYMBOL_SET_NAMES instead of
SYMBOL_NAME and SYMBOL_INIT_DEMANGLED_NAME.
* mdebugread.c (new_symbol): Likewise.
* stabsread.c (define_symbol): Likewise.
* coffread.c (process_coff_symbol): Likewise.
* dwarfread.c (new_symbol): Likewise.
* minsyms.c (prim_record_minimal_symbol_and_info): Use
SYMBOL_SET_NAMES instead of setting SYMBOL_NAME. Set the language
here.
(install_minimal_symbols): Don't set SYMBOL_LANGUAGE or call
SYMBOL_INIT_DEMANGLED_NAME.
* objfiles.c: Include "hashtab.h".
(allocate_objfile): Call htab_set_functions_ex for the
demangled_names_hash.
(free_objfile): Call htab_delete for the demangled_names_hash.
* objfiles.h (struct htab): Add declaration.
(struct objfile): Add demangled_names_hash.
* symfile.c: Include "hashtab.h".
(reread_symbols): Call htab_delete for the demangled_names_hash.
(add_psymbol_to_list): Use SYMBOL_SET_NAMES instead of putting
SYMBOL_NAME in the bcache.
* symtab.c: Include "hashtab.h". Update comments.
(create_demangled_names_hash, symbol_set_names): New functions.
(symbol_find_demangled_name): New function, broken out from
symbol_init_demangled_names.
(symbol_init_demangled_names): Use it.
* symtab.h (SYMBOL_INIT_DEMANGLED_NAME): Add missing parentheses.
(SYMBOL_SET_NAMES): New macro.
(symbol_set_names): Add prototype.
symbol table in an objfile.
* objfiles.c (terminate_minimal_symbol_table): New function.
(allocate_objfile): Call it.
* objfiles.h (terminate_minimal_symbol_table): New declaration.
(ALL_MSYMBOLS): No need to test whether (objfile)->msymbols is
non-NULL.
* minsyms.c (lookup_minimal_symbol_by_pc_section): To see whether
objfile has minimal symbols, compare minimal_symbol_count to zero,
instead of comparing msymbols with NULL.
* objfiles.c (have_minimal_symbols): Same.
* solib-sunos.c (solib_add_common_symbols): Call
terminate_minimal_symbol_table.
* symfile.c (reread_symbols): Same.
2003-01-23 Alexander Larsson <alexl@redhat.com>
Jim Blandy <jimb@redhat.com>
Add support for executables whose debug info has been separated
out into a separate file, leaving only a link behind.
* objfiles.h (struct objfile): New fields: separate_debug_objfile
and separate_debug_objfile_backlink.
(put_objfile_before): New declaration.
* symfile.c: #include "filenames.h".
(symbol_file_add_with_addrs_or_offsets): If this objfile has its
debug info in a separate file, read that, too. Save the addrs
argument, so we can use it again to read the separated debug info;
syms_from_objfile modifies the table we pass it.
(reread_symbols): After re-reading an objfile, call
reread_separate_symbols to refresh its separate debug info
objfile, if it has one.
(reread_separate_symbols, find_separate_debug_file,
get_debug_link_info, separate_debug_file_exists): New functions.
(debug_file_directory): New global var.
(_initialize_symfile): Initialize debug_file_directory, and
provide the new `set debug-file-directory' command to let the user
change it.
* objfiles.c (free_objfile): If this objfile has its debug info in
a separate objfile, free that one too. If this is itself a
separate debug info objfile, clear our parent's backlink.
(put_objfile_before): New function.
* utils.c (gnu_debuglink_crc32): New function.
* defs.h (gnu_debuglink_crc32): New declaration.
* Makefile.in (symfile.o): Note dependency on "filenames.h".
* configure.in: Handle --with-separate-debug-dir config option.
* acinclude.m4 (AC_DEFINE_DIR): New macro.
* acconfig.h (DEBUGDIR): New macro.
* configure, aclocal.m4, config.in: Regenerated.
gdb/doc/ChangeLog:
2003-01-23 Jim Blandy <jimb@redhat.com>
* gdb.texinfo (Separate Debug Files): New section.
(struct bstring, struct bcache): Move definition to "bcache.c".
Replaced by opaque declaration.
(bcache_xfree): Replace free_bcache.
(bcache_xmalloc, bcache_memory_used): Declare.
* bcache.c: Update copyright.
(struct bstring, struct bcache): Moved to here from "bcache.h".
Update comments.
(bcache_xmalloc, bcache_memory_used): New functions.
(bcache_xfree): Replace function free_bcache.
* Makefile.in (objfiles.o): Add $(bcache_h).
(objfiles_h): Remove $(bcache_h).
(symfile.o): Add $(bcache_h).
* symmisc.c: Update copyright.
(print_symbol_bcache_statistics): Pass psymbol_cache by value.
(print_objfile_statistics): Use bcache_memory_used.
* symfile.c: Include "bcache.h".
(reread_symbols): Use bcache_xfree.
(reread_symbols): Use bcache_xmalloc and bcache_xfree.
(add_psymbol_to_list): Pass psymbol_cache by value.
(add_psymbol_with_dem_name_to_list): Ditto.
* objfiles.h: Update copyright.
(struct bcache): Declare opaque. Do not include "bcache.h".
(struct objfile): Change psymbol_cache and macro_cache to ``struct
bcache'' pointers.
* dwarf2read.c (macro_start_file): Pass macro_cache by value.
* objfiles.c: Include "bcache.h". Update copyright.
(allocate_objfile): Use bcache_xmalloc to create psymbol_cache and
macro_cache.
(free_objfile): Use bcache_xfree.
in them yet.
* symtab.h (struct symtab): New member: `macro_table'.
* buildsym.h (pending_macros): New global variable.
* buildsym.c: #include "macrotab.h".
(buildsym_init): Initialize `pending_macros'.
(end_symtab): If we found macro information while reading a CU's
debugging info, do build a symtab structure for it. Make the
symtab point to the macro information, and clear the
`pending_macros' pointer which held it while we were reading the
debug info.
(really_free_pendings): Free any pending macro table.
* objfiles.h (struct objfile): New member: `macro_cache'.
* objfiles.c (allocate_objfile): Set allocate and free functions
for the macro cache's objstack.
(free_objfile): Empty the macro cache's obstack.
* symfile.c (reread_symbols): Empty the macro cache's obstack, and
set new allocate and free functions for it.
* solib-sunos.c (allocate_rt_common_objfile): Set allocate and
free functions for the macro cache's objstack. (Why is this
function building its own objfile?)
* symmisc.c (print_objfile_statistics): Print statistics on the
macro bcache.
* Makefile.in: Note that buildsym.o depends on macrotab.h.
* objfiles.h (SECT_OFF_BSS): Don't detect invalid sect_index_bss
here, let the users of the macro do it.
* symtab.h (ANOFFSET): Detect here if the section index is not
initialized.
* xcoffread.c (find_targ_sec): Don't treat .bss as special,
because some objfiles may not have that section at all.
* coffread.c (cs_to_section): Ditto.
* elfread.c (elf_symtab_read): Detect an uninitialized index
value.
(elfstab_offset_sections): The macro ANOFFSET cannot be used as an
lvalue anymore.
* remote.c (get_offsets, remote_cisco_objfile_relocate): Don't use
ANOFFSET as an lvalue.
* objfiles.c (objfile_relocate, objfile_relocate): Don't use
ANOFFSET as an lvalue.
* symfile.c (default_symfile_offsets): Don't use ANOFFSET as an
lvalue.
* solib.c (current_sos): New function, replacing find_solib.
(find_solib): Deleted.
(free_so): New function.
(clear_solib): Call free_so, instead of writing it out.
(solib_add): Rewritten: compare the inferior's current list of
shared objects with GDB's list, and do the required loads and
unloads.
(info_sharedlibrary_command, solib_address): Don't use find_solib
to walk the list of shared libraries: call solib_add, and then
walk the list at so_list_head normally.
* objfiles.c (free_objfile): Don't call CLEAR_SOLIB, and don't
detach the core target. These tasks are taken care of elsewhere.
* target.c (remove_target_sections): New function.
* target.h (remove_target_sections): New declaration.
* solib.c (symbol_add_stub): Check whether we've already created
an objfile for this shared object first, before doing all that
work to compute section addresses, etc.
* objfiles.c (unlink_objfile): Report an internal error if objfile
doesn't occur in the object_files list.
* solib.c (special_symbol_handling): Delete argument; it's not
used.
* solib.c (SOLIB_EXTRACT_ADDRESS): New macro to extract addresses
from solib structures. Use it throughout solib.c, get rid of all
CORE_ADDR casts.
(struct so_list): Change type of lmaddr to CORE_ADDR.
(first_link_map_member): Change return value type to CORE_ADDR,
update callers.
(solib_add_common_symbols): Change parameter type to CORE_ADDR,
update callers.
(open_symbol_file_object, find_solib): Change type of lm variable
to CORE_ADDR.
Except for the two m32r modules, this checkin is for
overlay support.
* blockframe.c: blockvector_for_pc_sect(), block_for_pc_sect(),
find_pc_sect_function(), find_pc_sect_partial_function(): new
functions for debugging overlays; pc without section is ambiguous.
* breakpoint.[ch]: add section pointer to breakpoint struct;
add section argument to check_duplicates(); check section as well
as pc in [breakpoint_here_p(), breakpoint_inserted_here_p(),
breakpoint_thread_match(), bpstat_stop_status()];
add section argument to describe_other_breakpoints();
use INIT_SAL() macro to zero-out new sal structures;
make resolve_sal_pc() fix up the sal's section as well as its pc;
match on section + pc in clear_command() and delete_breakpoint();
account for overlay sections in insert_breakpoints(),
remove_breakpoint() and breakpoint_re_set_one();
all this to support overlays where a PC is not unique.
* exec.c: change xfer_memory() to handle overlay sections.
* findvar.c: change read_var_value() to handle overlay sections.
* frame.h: declaration for block_for_pc_sect() [blockframe.c].
* infcmd.c: jump_command() warns against jumping into an overlay
that's not in memory. Also use INIT_SAL() to initialize sals.
* infrun.c: wait_for_inferior() sets a flag to invalidate cached
overlay state information; Also use INIT_SAL() to init sals.
* m32r-rom.c: modify load routines to use LMA instead of VMA.
* m32r-stub.c: mask exit value down to 8 bits; screen out any
memory read/writes in the range 600000 to a00000, and ff680000
to ff800000 (hangs because nothing is mapped there); fix strcpy().
* maint.c: maintenance command "translate-address" supports overlays.
* minsyms.c: lookup_minimal_symbol_by_pc_sect() supports overlays.
* objfiles.[ch]: add ovly_mapped field to the obj_section struct;
this constitutes gdb's internal overlay mapping table. Add macro
ALL_OBJSECTIONS() to loop thru the obj_structs and look at overlays.
Add function find_pc_sect_section().
* printcmd.c: modify print_address_symbolic() with overlay smarts;
modify address_info() with overlay smarts; add function sym_info()
to support the INFO SYMBOL command (translate address to symbol(s));
modify disassemble_command() to work on unmapped overlays.
* source.c: use INIT_SAL() to initialize sals.
* symfile.[ch]: change generic_load() to use section's LMA address
instead of VMA address, for overlay sections.
Add numerous functions for finding a PC's section / overlay,
translating between VMA and LMA address ranges, determining if an
overlay section is mapped, etc. Add several user commands for
overlay debugging. Add support for a "generic" form of automatically
reading overlay mapping info from the inferior (based on the default
(simple) overlay manager which Cygnus provides as an example).
* symtab.[ch]: add functions find_pc_sect_symtab(),
find_pc_sect_psymtab(), find_pc_sect_psymbol(), find_pc_sect_line()
for lookup; modify lookup_symbol and decode_line_1() to use them;
modify find_function_start_sal() to account for overlay sections;
add macro INIT_SAL() for initializing struct symtab_and_line.
* target.c: fix a comment in the declaration of target_ops.
David Carlton
Daniel Jacobowitz
Jim Blandy
Andrew Cagney
Kevin Buettner
Peter Schauer
Elena Zannoni
Jason Molenda
Stan Shebs
David Taylor
Ron Unrau
Fred Fish
Per Bothner
Michael Snyder