This patch adds default data address space origin (0x800000) to the symbol addresses.
when disassemble lds/sts instructions. So that symbol names shall be printed in comments
for lds/sts instructions disassemble.
ld/
* testsuite/ld-avr/lds-mega.d: New test.
* testsuite/ld-avr/lds-mega.s: New test source.
* testsuite/ld-avr/lds-tiny.d: New test.
* testsuite/ld-avr/lds-tiny.s: New test source.
opcodes/
* avr-dis.c (avr_operand): Add default data address space origin (0x800000) to the
address and set as symbol address for LDS/ STS immediate operands.
include/ChangeLog:
2016-06-08 Jose E. Marchesi <jose.marchesi@oracle.com>
* opcode/sparc.h: Add missing documentation for hyperprivileged
registers in rd (%) and rs1 ($).
To call an external function, the direct branch to the PLT entry can be
replaced by an indirect branch via the GOT slot, which is similar to the
first instruction in the PLT slot. Instead using the PLT slot as function
address, the function address is retrieved from the GOT slot. The
R_386_GOT32X relocation can be used to compute the address of the symbol’s
GOT entry without base register when PIC is disabled. In non-PIC
executable,
call/jmp *func@GOT
should be used for indirect branch via the GOT slot and
movl func@GOT, %eax
should be used to load function address. Unlike PIC case, no register
is needed to access GOT. If linker determines the function is defined
locally, it converts indirect branch via the GOT slot to direct branch
with a nop prefix and converts load via the GOT slot to load immediate
or lea.
* testsuite/ld-i386/libno-plt-1b.dd: New file.
* testsuite/ld-i386/libno-plt-1b.rd: Likewise.
* testsuite/ld-i386/no-plt-1a.dd: Likewise.
* testsuite/ld-i386/no-plt-1a.rd: Likewise.
* testsuite/ld-i386/no-plt-1b.dd: Likewise.
* testsuite/ld-i386/no-plt-1b.rd: Likewise.
* testsuite/ld-i386/no-plt-1c.dd: Likewise.
* testsuite/ld-i386/no-plt-1c.rd: Likewise.
* testsuite/ld-i386/no-plt-1d.dd: Likewise.
* testsuite/ld-i386/no-plt-1d.rd: Likewise.
* testsuite/ld-i386/no-plt-1e.dd: Likewise.
* testsuite/ld-i386/no-plt-1e.rd: Likewise.
* testsuite/ld-i386/no-plt-1f.dd: Likewise.
* testsuite/ld-i386/no-plt-1f.rd: Likewise.
* testsuite/ld-i386/no-plt-1g.dd: Likewise.
* testsuite/ld-i386/no-plt-1g.rd: Likewise.
* testsuite/ld-i386/no-plt-1h.dd: Likewise.
* testsuite/ld-i386/no-plt-1h.rd: Likewise.
* testsuite/ld-i386/no-plt-1i.dd: Likewise.
* testsuite/ld-i386/no-plt-1i.rd: Likewise.
* testsuite/ld-i386/no-plt-1j.dd: Likewise.
* testsuite/ld-i386/no-plt-1j.rd: Likewise.
* testsuite/ld-i386/no-plt-check1a.S: Likewise.
* testsuite/ld-i386/no-plt-check1b.S: Likewise.
* testsuite/ld-i386/no-plt-extern1a.S: Likewise.
* testsuite/ld-i386/no-plt-extern1b.S: Likewise.
* testsuite/ld-i386/no-plt-func1.c: Likewise.
* testsuite/ld-i386/no-plt-main1.c: Likewise.
* testsuite/ld-i386/no-plt.exp: Likewise.
We can generate i386 TLS code sequences for general and local dynamic
models without PLT, which uses indirect call via GOT:
call *___tls_get_addr@GOT(%reg)
where EBX register isn't required as GOT base, instead of direct call:
call ___tls_get_addr[@PLT]
which requires EBX register as GOT base.
Since direct call is 4-byte long and indirect call, is 5-byte long, the
extra one byte must be handled properly.
For general dynamic model, 7-byte lea instruction before call instruction
is replaced by 6-byte one to make room for indirect call. For local
dynamic model, we simply use 5-byte indirect call.
TLS linker optimization is updated to recognize new instruction patterns.
For local dynamic model to local exec model transition, we generate
a 6-byte lea instruction as nop, instead of a 1-byte nop plus a 4-byte
lea instruction. Since linker may convert
call ___tls_get_addr[@PLT]
to
addr32 call ____tls_get_addr
when producing static executable, both patterns are recognized.
bfd/
* elf64-i386.c (elf_i386_link_hash_entry): Add tls_get_addr.
(elf_i386_link_hash_newfunc): Initialize tls_get_addr to 2.
(elf_i386_check_tls_transition): Check indirect call and direct
call with the addr32 prefix for general and local dynamic models.
Set the tls_get_addr feild.
(elf_i386_convert_load_reloc): Always use addr32 prefix for
indirect ___tls_get_addr call via GOT.
(elf_i386_relocate_section): Handle GD->LE, GD->IE and LD->LE
transitions with indirect call and direct call with the addr32
prefix.
ld/
* testsuite/ld-i386/i386.exp: Run libtlspic2.so, tlsbin2,
tlsgd3, tlsld2, tlsgd4, tlspie3a, tlspie3b and tlspie3c.
* testsuite/ld-i386/pass.out: New file.
* testsuite/ld-i386/tls-def1.c: Likewise.
* testsuite/ld-i386/tls-gd1.S: Likewise.
* testsuite/ld-i386/tls-ld1.S: Likewise.
* testsuite/ld-i386/tls-main1.c: Likewise.
* testsuite/ld-i386/tls.exp: Likewise.
* testsuite/ld-i386/tlsbin2-nacl.rd: Likewise.
* testsuite/ld-i386/tlsbin2.dd: Likewise.
* testsuite/ld-i386/tlsbin2.rd: Likewise.
* testsuite/ld-i386/tlsbin2.sd: Likewise.
* testsuite/ld-i386/tlsbin2.td: Likewise.
* testsuite/ld-i386/tlsbinpic2.s: Likewise.
* testsuite/ld-i386/tlsgd3.dd: Likewise.
* testsuite/ld-i386/tlsgd3.s: Likewise.
* testsuite/ld-i386/tlsgd4.d: Likewise.
* testsuite/ld-i386/tlsgd4.s: Likewise.
* testsuite/ld-i386/tlsld2.s: Likewise.
* testsuite/ld-i386/tlspic2-nacl.rd: Likewise.
* testsuite/ld-i386/tlspic2.dd: Likewise.
* testsuite/ld-i386/tlspic2.rd: Likewise.
* testsuite/ld-i386/tlspic2.sd: Likewise.
* testsuite/ld-i386/tlspic2.td: Likewise.
* testsuite/ld-i386/tlspic3.s: Likewise.
* testsuite/ld-i386/tlspie3.s: Likewise.
* testsuite/ld-i386/tlspie3a.d: Likewise.
* testsuite/ld-i386/tlspie3b.d: Likewise.
* testsuite/ld-i386/tlspie3c.d: Likewise.
To call an external function, the direct branch to the PLT entry can be
replaced by an indirect branch via the GOT slot, which is similar to the
first instruction in the PLT slot. Instead using the PLT slot as function
address, the function address is retrieved from the GOT slot. If linker
determines the function is defined locally, it converts indirect branch
via the GOT slot to direct branch with a nop prefix and converts load via
the GOT slot to load immediate or lea,
* testsuite/ld-x86-64/libno-plt-1b.dd: Likewise.
* testsuite/ld-x86-64/libno-plt-1b.rd: Likewise.
* testsuite/ld-x86-64/no-plt-1a.dd: Likewise.
* testsuite/ld-x86-64/no-plt-1a.rd: Likewise.
* testsuite/ld-x86-64/no-plt-1b.dd: Likewise.
* testsuite/ld-x86-64/no-plt-1b.rd: Likewise.
* testsuite/ld-x86-64/no-plt-1c.dd: Likewise.
* testsuite/ld-x86-64/no-plt-1c.rd: Likewise.
* testsuite/ld-x86-64/no-plt-1d.dd: Likewise.
* testsuite/ld-x86-64/no-plt-1d.rd: Likewise.
* testsuite/ld-x86-64/no-plt-1e.dd: Likewise.
* testsuite/ld-x86-64/no-plt-1e.rd: Likewise.
* testsuite/ld-x86-64/no-plt-1f.dd: Likewise.
* testsuite/ld-x86-64/no-plt-1f.rd: Likewise.
* testsuite/ld-x86-64/no-plt-1g.dd: Likewise.
* testsuite/ld-x86-64/no-plt-1g.rd: Likewise.
* testsuite/ld-x86-64/no-plt-check1.S: Likewise.
* testsuite/ld-x86-64/no-plt.exp: Likewise.
* testsuite/ld-x86-64/no-plt-extern1.S: Likewise.
* testsuite/ld-x86-64/no-plt-func1.c: Likewise.
* testsuite/ld-x86-64/no-plt-main1.c: Likewise.
The only non-comment fix here is in the code writing out the 3 fixed
.got.plt entries - it mistakenly put a 64-bit 0 at offsets 8 and 12
instead of 8 and 16.
bfd/ChangeLog:
* elf32-s390.c (elf_s390_finish_dynamic_symbol): Fix comment.
* elf64-s390.c (elf_s390x_plt_entry): Fix comment.
(elf_s390_relocate_section): Fix comment.
(elf_s390_finish_dynamic_sections): Fix initialization of fixed
.got.plt entries.
Revert the addition of `ft32-*-*' to this test case made with commit
d1f70bdcab ("Fix lots of linker testsuite failures for the FT32
target.") as this case scores an XPASS now.
ld/
* testsuite/ld-elf/init-fini-arrays.d: Remove `ft32-*-*' xfail.
Embedding the .plt section in another revealed a bug in the way the
larl operand of the first magic plt entry is being calculated. Fixed
with the attached patch.
bfd/ChangeLog:
* elf64-s390.c (elf_s390_finish_dynamic_sections): Subtract plt
section offset when calculation the larl operand in the first PLT
entry.
ld/ChangeLog:
* testsuite/ld-s390/pltoffset-1.dd: New test.
* testsuite/ld-s390/pltoffset-1.ld: New test.
* testsuite/ld-s390/pltoffset-1.s: New test.
* testsuite/ld-s390/s390.exp: Run new test.
VLE is an encoding, not a particular processor architecture, so it
isn't really proper to select insns based on PPC_OPCODE_VLE. For
example
{"evaddw", VX (4, 512), VX_MASK, PPCSPE|PPCVLE, PPCNONE, {RS, RA, RB}},
{"vaddubs", VX (4, 512), VX_MASK, PPCVEC|PPCVLE, PPCNONE, {VD, VA, VB}},
shows two insns that have the same encoding, both available with VLE.
Enabling both with VLE means we can't disassemble the second variant
even if -Maltivec is given rather than -Mspe. Also, we don't check
user assembly against the processor type as well as we could.
Another problem is that when using the VLE encoding, insns from the
main ppc opcode table are not available, except those using opcode 4
and 31. Correcting this revealed two errors in the ld testsuite,
use of "nop" and "rfmci" when -mvle.
This patch fixes those problems in the opcode table, and removes
PPCNONE. I find a plain 0 distracts less from other values.
In addition, I've implemented code to recognize some machine values
from the apuinfo note present in ppc32 objects. It's not a complete
disambiguation since we're lacking info to detect newer chips, but
what we have should help with disassembly.
include/
* elf/ppc.h (APUINFO_SECTION_NAME, APUINFO_LABEL, PPC_APUINFO_ISEL,
PPC_APUINFO_PMR, PPC_APUINFO_RFMCI, PPC_APUINFO_CACHELCK,
PPC_APUINFO_SPE, PPC_APUINFO_EFS, PPC_APUINFO_BRLOCK,
PPC_APUINFO_VLE: Define.
opcodes/
* ppc-dis.c (ppc_opts): Delete extraneous parentheses. Default
cpu for "vle" to e500.
* ppc-opc.c (ALLOW8_SPRG): Remove PPC_OPCODE_VLE.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW, DCBT_EO): Likewise.
(PPCNONE): Delete, substitute throughout.
(powerpc_opcodes): Remove PPCVLE from "flags". Add to "deprecated"
except for major opcode 4 and 31.
(vle_opcodes <se_rfmci>): Add PPCRFMCI to flags.
bfd/
* cpu-powerpc.c (powerpc_compatible): Allow bfd_mach_ppc_vle entry
to match other 32-bit archs.
* elf32-ppc.c (_bfd_elf_ppc_set_arch): New function.
(ppc_elf_object_p): Call it.
(ppc_elf_special_sections): Use APUINFO_SECTION_NAME. Fix
overlong line.
(APUINFO_SECTION_NAME, APUINFO_LABEL): Don't define here.
* elf64-ppc.c (ppc64_elf_object_p): Call _bfd_elf_ppc_set_arch.
* bfd-in.h (_bfd_elf_ppc_at_tls_transform,
_bfd_elf_ppc_at_tprel_transform): Move to..
* elf-bfd.h: ..here.
(_bfd_elf_ppc_set_arch): Declare.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c (PPC_APUINFO_ISEL, PPC_APUINFO_PMR,
PPC_APUINFO_RFMCI, PPC_APUINFO_CACHELCK, PPC_APUINFO_SPE,
PPC_APUINFO_EFS, PPC_APUINFO_BRLOCK, PPC_APUINFO_VLE): Don't define.
(ppc_setup_opcodes): Check vle disables powerpc_opcodes overridden
by vle_opcodes, and that vle flag doesn't enable opcodes. Don't
add vle_opcodes twice.
(ppc_cleanup): Use APUINFO_SECTION_NAME and APUINFO_LABEL.
ld/
* testsuite/ld-powerpc/apuinfo1.s: Delete nop.
* testsuite/ld-powerpc/apuinfo-vle2.s: New.
* testsuite/ld-powerpc/powerpc.exp: Use apuinfo-vle2.s.
This patch adds the architecture extension "+ras" to enable RAS
support. It is enabled by default for -march=armv8.2-a and available but
disabled by default for armv8-a and armv8.1-a.
gas/
* config/tc-arm.c (arm_ext_v8_2): Rename to arm_ext_ras.
(arm_ext_ras): Renamed from arm_ext_v8_2.
(insns): Update for arm_ext_v8_2 renaming.
(arm_extensions): Add "ras".
* doc/c-arm.texi (ARM Options): Add an entry for "ras".
* testsuite/gas/arm/armv8-a+ras.d: New.
* testsuite/gas/arm/armv8_2-a.d: Add explicit command line
options.
include/
* opcode/arm.h (ARM_EXT2_RAS): New. Also align preceding
entries.
(ARM_AEXT_V8_2A): Add ARM_EXT2_RAS.
opcodes/
* arm-dis.c (arm_opcodes): Replace ARM_EXT_V8_2A with
ARM_EXT_RAS in relevant entries.
Eclipse CDT now supports enabling execution recording using two methods
(full and btrace) and both formats for btrace (bts and pt). In the
event that recording is enabled behind the back of the GUI (by the user
on the command line, or a script), we need to know which method/format
are being used, so it can be correctly reflected in the interface. This
patch adds this information to the =record-started async record.
Before:
=record-started,thread-group="i1"
After:
=record-started,thread-group="i1",method="btrace",format="bts"
=record-started,thread-group="i1",method="btrace",format="pt"
=record-started,thread-group="i1",method="full"
The "format" field is only present when the current method supports
multiple formats (only the btrace method as of now).
gdb/ChangeLog:
* NEWS: Mention the new fields in =record-started.
* common/btrace-common.h (btrace_format_short_string): New function
declaration.
* common/btrace-common.c (btrace_format_short_string): New
function.
* mi/mi-interp.c (mi_record_changed): Output method and format
fields in the =record-started record.
* record-btrace.c (record_btrace_open): Adapt record_changed
notification.
* record-full.c (record_full_open): Likewise.
* record.c (cmd_record_stop): Likewise.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Async Records): Document method and
format fields in =record-started.
* observer.texi (record_changed): Add method and format
parameters.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-record-changed.exp: Adjust =record-started output
matching.
We can generate x86-64 TLS code sequences for general and local dynamic
models without PLT, which uses indirect call via GOT:
call *__tls_get_addr@GOTPCREL(%rip)
instead of direct call:
call __tls_get_addr[@PLT]
Since direct call is 4-byte long and indirect call, is 5-byte long, the
extra one byte must be handled properly.
For general dynamic model, one 0x66 prefix before call instruction is
removed to make room for indirect call. For local dynamic model, we
simply use 5-byte indirect call.
TLS linker optimization is updated to recognize new instruction patterns.
For local dynamic model to local exec model transition, we generate
4 0x66 prefixes, instead of 3, before mov instruction in 64-bit and
generate a 5-byte nop, instead of 4-byte, before mov instruction in
32-bit. Since linker may convert
call *__tls_get_addr@GOTPCREL(%rip)
to
addr32 call __tls_get_addr
when producing static executable, both patterns are recognized.
bfd/
* elf64-x86-64.c (elf_x86_64_link_hash_entry): Add tls_get_addr.
(elf_x86_64_link_hash_newfunc): Initialize tls_get_addr to 2.
(elf_x86_64_check_tls_transition): Check indirect call and
direct call with the addr32 prefix for general and local dynamic
models. Set the tls_get_addr feild.
(elf_x86_64_convert_load_reloc): Always use addr32 prefix for
indirect __tls_get_addr call via GOT.
(elf_x86_64_relocate_section): Handle GD->LE, GD->IE and LD->LE
transitions with indirect call and direct call with the addr32
prefix.
ld/
* testsuite/ld-x86-64/pass.out: New file.
* testsuite/ld-x86-64/tls-def1.c: Likewise.
* testsuite/ld-x86-64/tls-gd1.S: Likewise.
* testsuite/ld-x86-64/tls-ld1.S: Likewise.
* testsuite/ld-x86-64/tls-main1.c: Likewise.
* testsuite/ld-x86-64/tls.exp: Likewise.
* testsuite/ld-x86-64/tlsbin2-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlsbin2.dd: Likewise.
* testsuite/ld-x86-64/tlsbin2.rd: Likewise.
* testsuite/ld-x86-64/tlsbin2.sd: Likewise.
* testsuite/ld-x86-64/tlsbin2.td: Likewise.
* testsuite/ld-x86-64/tlsbinpic2.s: Likewise.
* testsuite/ld-x86-64/tlsgd10.dd: Likewise.
* testsuite/ld-x86-64/tlsgd10.s: Likewise.
* testsuite/ld-x86-64/tlsgd11.dd: Likewise.
* testsuite/ld-x86-64/tlsgd11.s: Likewise.
* testsuite/ld-x86-64/tlsgd12.d: Likewise.
* testsuite/ld-x86-64/tlsgd12.s: Likewise.
* testsuite/ld-x86-64/tlsgd13.d: Likewise.
* testsuite/ld-x86-64/tlsgd13.s: Likewise.
* testsuite/ld-x86-64/tlsgd14.dd: Likewise.
* testsuite/ld-x86-64/tlsgd14.s: Likewise.
* testsuite/ld-x86-64/tlsgd5c.s: Likewise.
* testsuite/ld-x86-64/tlsgd6c.s: Likewise.
* testsuite/ld-x86-64/tlsgd9.dd: Likewise.
* testsuite/ld-x86-64/tlsgd9.s: Likewise.
* testsuite/ld-x86-64/tlsld4.dd: Likewise.
* testsuite/ld-x86-64/tlsld4.s: Likewise.
* testsuite/ld-x86-64/tlsld5.dd: Likewise.
* testsuite/ld-x86-64/tlsld5.s: Likewise.
* testsuite/ld-x86-64/tlsld6.dd: Likewise.
* testsuite/ld-x86-64/tlsld6.s: Likewise.
* testsuite/ld-x86-64/tlspic2-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlspic2.dd: Likewise.
* testsuite/ld-x86-64/tlspic2.rd: Likewise.
* testsuite/ld-x86-64/tlspic2.sd: Likewise.
* testsuite/ld-x86-64/tlspic2.td: Likewise.
* testsuite/ld-x86-64/tlspic3.s: Likewise.
* testsuite/ld-x86-64/tlspie2.s: Likewise.
* testsuite/ld-x86-64/tlspie2a.d: Likewise.
* testsuite/ld-x86-64/tlspie2b.d: Likewise.
* testsuite/ld-x86-64/tlspie2c.d: Likewise.
* testsuite/ld-x86-64/tlsgd5.dd: Updated.
* testsuite/ld-x86-64/tlsgd6.dd: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run libtlspic2.so, tlsbin2,
tlsgd5b, tlsgd6b, tlsld4, tlsld5, tlsld6, tlsgd9, tlsgd10,
tlsgd11, tlsgd14, tlsgd12, tlsgd13, tlspie2a, tlspie2b and
tlspie2c.
The values are always members of the enum, except the two places -1 is assigned
only to playcate -Wuninitialized because gcc isn't or at least didn't used to
be smart enough to figure out its only used if it was set.
gas/ChangeLog:
2016-06-05 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-sh.c (parse_reg): Change type of mode argument to
sh_arg_type.
(get_operand): Adjust.
(insert): Change type of how to bfd_reloc_code_real_type.
(insert4): Likewise.
* config/tc-sh64.c (shmedia_get_operand): Adjust.
(shmedia_parse_reg): Change type of mode to shmedia_arg_type.
it points to the result of strchr on a const char *, so it aliases
something that is const. Further its only passed to a function that expects a
const char *, so there's no reason for it to not be const.
gas/ChangeLog:
2016-06-05 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-nds32.c (nds32_parse_option): Make the type of ptr_arg
const char *.
bfd/
* coff-z8k.c (extra_case): Fix range check for R_JR relocation.
ld/
* ld/testsuite/ld-z8k/0filler.s: New file.
* ld/testsuite/ld-z8k/branch-target.s: New file.
* ld/testsuite/ld-z8k/branch-target2.s: New file.
* ld/testsuite/ld-z8k/calr-back-8001.d: New file.
* ld/testsuite/ld-z8k/calr-back-8002.d: New file.
* ld/testsuite/ld-z8k/calr-back-fail-8001.d: New file.
* ld/testsuite/ld-z8k/calr-back-fail-8002.d: New file.
* ld/testsuite/ld-z8k/calr-forw-8001.d: New file.
* ld/testsuite/ld-z8k/calr-forw-8002.d: New file.
* ld/testsuite/ld-z8k/calr-forw-fail-8001.d: New file.
* ld/testsuite/ld-z8k/calr-forw-fail-8002.d: New file.
* ld/testsuite/ld-z8k/calr-opcode.s: New file.
* ld/testsuite/ld-z8k/dbjnz-forw-8001.d: New file.
* ld/testsuite/ld-z8k/dbjnz-forw-8002.d: New file.
* ld/testsuite/ld-z8k/dbjnz-forw-fail-8001.d: New file.
* ld/testsuite/ld-z8k/dbjnz-forw-fail-8002.d: New file.
* ld/testsuite/ld-z8k/dbjnz-opcode.s: New file.
* ld/testsuite/ld-z8k/djnz-back-8001.d: New file.
* ld/testsuite/ld-z8k/djnz-back-8002.d: New file.
* ld/testsuite/ld-z8k/djnz-back-fail-8001.d: New file.
* ld/testsuite/ld-z8k/djnz-back-fail-8002.d: New file.
* ld/testsuite/ld-z8k/djnz-forw-8001.d: New file.
* ld/testsuite/ld-z8k/djnz-forw-8002.d: New file.
* ld/testsuite/ld-z8k/djnz-forw-fail-8001.d: New file.
* ld/testsuite/ld-z8k/djnz-forw-fail-8002.d: New file.
* ld/testsuite/ld-z8k/djnz-opcode.s: New file.
* ld/testsuite/ld-z8k/filler.s: New file.
* ld/testsuite/ld-z8k/jr-back-8001.d: New file.
* ld/testsuite/ld-z8k/jr-back-8002.d: New file.
* ld/testsuite/ld-z8k/jr-back-fail-8001.d: New file.
* ld/testsuite/ld-z8k/jr-back-fail-8002.d: New file.
* ld/testsuite/ld-z8k/jr-forw-8001.d: New file.
* ld/testsuite/ld-z8k/jr-forw-8002.d: New file.
* ld/testsuite/ld-z8k/jr-forw-fail-8001.d: New file.
* ld/testsuite/ld-z8k/jr-forw-fail-8002.d: New file.
* ld/testsuite/ld-z8k/jr-opcode.s: New file.
* ld/testsuite/ld-z8k/ldr-back-8001.d: New file.
* ld/testsuite/ld-z8k/ldr-back-8002.d: New file.
* ld/testsuite/ld-z8k/ldr-back-fail-8001.d: New file.
* ld/testsuite/ld-z8k/ldr-back-fail-8002.d: New file.
* ld/testsuite/ld-z8k/ldr-forw-8001.d: New file.
* ld/testsuite/ld-z8k/ldr-forw-8002.d: New file.
* ld/testsuite/ld-z8k/ldr-forw-fail-8001.d: New file.
* ld/testsuite/ld-z8k/ldr-forw-fail-8002.d: New file.
* ld/testsuite/ld-z8k/ldr-opcode.s: New file.
* ld/testsuite/ld-z8k/ldrb-forw-8001.d: New file.
* ld/testsuite/ld-z8k/ldrb-forw-8002.d: New file.
* ld/testsuite/ld-z8k/ldrb-forw-fail-8001.d: New file.
* ld/testsuite/ld-z8k/ldrb-forw-fail-8002.d: New file.
* ld/testsuite/ld-z8k/ldrb-opcode.s: New file.
* ld/testsuite/ld-z8k/ldrb-opcode2.s: New file.
* ld/testsuite/ld-z8k/other-file.s: New file.
* ld/testsuite/ld-z8k/reloc.dd: New file.
* ld/testsuite/ld-z8k/reloc.ld: New file.
* ld/testsuite/ld-z8k/relocseg.dd: New file.
* ld/testsuite/ld-z8k/relocseg.ld: New file.
* ld/testsuite/ld-z8k/relocseg1.dd: New file.
* ld/testsuite/ld-z8k/test-ld.sh: New file.
* ld/testsuite/ld-z8k/this-file.s: New file.
* ld/testsuite/ld-z8k/z8k.exp: New file.
AMD64 spec and Intel64 spec differ in indirect branches in 64-bit mode.
AMD64 supports indirect branches with 16-bit address via the data size
prefix while the data size prefix is ignored by Intel64.
gas/
PR binutis/18386
* testsuite/gas/i386/i386.exp: Run x86-64-branch-4.
* testsuite/gas/i386/x86-64-branch.d: Updated.
* testsuite/gas/i386/ilp32/x86-64-branch.d: Likewise.
* testsuite/gas/i386/x86-64-branch-4.l: New file.
* testsuite/gas/i386/x86-64-branch-4.s: Likewise.
opcodes/
PR binutis/18386
* i386-dis.c (indirEv): Replace stack_v_mode with indir_v_mode.
(indir_v_mode): New.
Add comments for '&'.
(reg_table): Replace "{T|}" with "{&|}" on call and jmp.
(putop): Handle '&'.
(intel_operand_size): Handle indir_v_mode.
(OP_E_register): Likewise.
* i386-opc.tbl: Mark 64-bit indirect call/jmp as AMD64. Add
64-bit indirect call/jmp for AMD64.
* i386-tbl.h: Regenerated
gdb/ChangeLog:
2016-06-02 Jon Turney <jon.turney@dronecode.org.uk>
* windows-nat.c (handle_output_debug_string): Return type of
gdb_signal_from_host() is gdb_signal, not an int.
(windows_get_exec_module_filename): Add pointer casts for C++.
gdb/gdbserver/ChangeLog:
2016-06-02 Jon Turney <jon.turney@dronecode.org.uk>
* win32-low.c (win32_create_inferior): Add pointer casts for C++.
This fixes PR python/18984.
The bug is that gdbpy_solib_name uses GDB_PY_LL_ARG, whereas it should
use GDB_PY_LLU_ARG to avoid overflow.
Built and tested on x86-64 Fedora 23.
2016-06-02 Tom Tromey <tom@tromey.com>
PR python/18984:
* python/python.c (gdbpy_solib_name): Use GDB_PY_LLU_ARG.
2016-06-02 Tom Tromey <tom@tromey.com>
PR python/18984:
* gdb.python/py-shared.exp: Add solib_name test.
gas * config/tc-arc.c (parse_opcode_flags): New function.
(find_opcode_match): Move flag parsing code out to new function.
Ignore operands marked IGNORE.
(build_fake_opcode_hash_entry): New function.
(find_special_case_long_opcode): New function.
(find_special_case): Lookup long opcodes.
* testsuite/gas/arc/nps400-7.d: New file.
* testsuite/gas/arc/nps400-7.s: New file.
include * opcode/arc.h (MAX_INSN_ARGS): Increase to 16.
(struct arc_long_opcode): New structure.
(arc_long_opcodes): Declare.
(arc_num_long_opcodes): Declare.
opcodes * arc-dis.c (struct arc_operand_iterator): New structure.
(find_format_from_table): All the old content from find_format,
with some minor adjustments, and parameter renaming.
(find_format_long_instructions): New function.
(find_format): Rewritten.
(arc_insn_length): Add LSB parameter.
(extract_operand_value): New function.
(operand_iterator_next): New function.
(print_insn_arc): Use new functions to find opcode, and iterator
over operands.
* arc-opc.c (insert_nps_3bit_dst_short): New function.
(extract_nps_3bit_dst_short): New function.
(insert_nps_3bit_src2_short): New function.
(extract_nps_3bit_src2_short): New function.
(insert_nps_bitop1_size): New function.
(extract_nps_bitop1_size): New function.
(insert_nps_bitop2_size): New function.
(extract_nps_bitop2_size): New function.
(insert_nps_bitop_mod4_msb): New function.
(extract_nps_bitop_mod4_msb): New function.
(insert_nps_bitop_mod4_lsb): New function.
(extract_nps_bitop_mod4_lsb): New function.
(insert_nps_bitop_dst_pos3_pos4): New function.
(extract_nps_bitop_dst_pos3_pos4): New function.
(insert_nps_bitop_ins_ext): New function.
(extract_nps_bitop_ins_ext): New function.
(arc_operands): Add new operands.
(arc_long_opcodes): New global array.
(arc_num_long_opcodes): New global.
* arc-nps400-tbl.h: Add comments referencing arc_long_opcodes.
This reverts the pr16467 change, which was incorrect due to faulty
analysis of the pr16467 testcase. The failure was not due to a
mismatch in symbol type (ifunc/non-ifunc) but due to a symbol loop
being set up.
See https://sourceware.org/ml/binutils/2016-06/msg00013.html for some
rambling on versioned symbols and ELF shared library symbol overriding
that explain this patch.
bfd/
PR ld/20159
PR ld/16467
* elflink.c (_bfd_elf_merge_symbol): Revert PR16467 change.
(_bfd_elf_add_default_symbol): Don't indirect to/from defined
symbol given a version by a script different to the version
of the symbol being added.
(elf_link_add_object_symbols): Use _bfd_elf_strtab_save and
_bfd_elf_strtab_restore. Don't fudge dynstr references.
* elf-strtab.c (_bfd_elf_strtab_restore_size): Delete.
(struct strtab_save): New.
(_bfd_elf_strtab_save, _bfd_elf_strtab_restore): New functions.
* elf-bfd.h (_bfd_elf_strtab_restore_size): Delete.
(_bfd_elf_strtab_save, _bfd_elf_strtab_restore): Declare.
This seems a little easier to understand than using a sentinal, and will
hopefully let the compiler optimize the loop better. It also has the effect
that we stop initializing a field of the sentinal that is an enum with zero.
gas/ChangeLog:
2016-06-01 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-avr.c (avr_parse_cons_expression): Replace iteration to
sentinal with iteration to array size.