This fixes PR symtab/14604, PR symtab/14605, and Jan's test at
https://sourceware.org/ml/gdb-patches/2014-07/msg00158.html, in a tree
with bddbbed reverted:
2014-07-22 Pedro Alves <palves@redhat.com>
* value.c (allocate_optimized_out_value): Don't mark value as
non-lazy.
The PRs are about variables described by the DWARF as being split over
multiple registers using DWARF piece information, but some of those
registers being marked as optimised out (not saved) by a later frame.
GDB currently incorrectly mishandles these partially-optimized-out
values.
Even though we can usually tell from the debug info whether a local or
global is optimized out, handling the case of a local living in a
register that was not saved in a frame requires fetching the variable.
GDB also needs to fetch a value to tell whether parts of it are
"<unavailable>". Given this, it's not worth it to try to avoid
fetching lazy optimized-out values based on debug info alone.
So this patch makes GDB track which chunks of a value's contents are
optimized out like it tracks <unavailable> contents. That is, it
makes value->optimized_out be a bit range vector instead of a boolean,
and removes the struct lval_funcs check_validity and check_any_valid
hooks.
Unlike Andrew's series which this is based on (at
https://sourceware.org/ml/gdb-patches/2013-08/msg00300.html, note some
pieces have gone in since), this doesn't merge optimized out and
unavailable contents validity/availability behind a single interface,
nor does it merge the bit range vectors themselves (at least yet).
While it may be desirable to have a single entry point that returns
existence of contents irrespective of what may make them
invalid/unavailable, several places want to treat optimized out /
unavailable / etc. differently, so each spot that potentially could
use it will need to be careful considered on case-by-case basis, and
best done as a separate change.
This fixes Jan's test, because value_available_contents_eq wasn't
considering optimized out value contents. It does now, and because of
that it's been renamed to value_contents_eq.
A new intro comment is added to value.h describing "<optimized out>",
"<not saved>" and "<unavailable>" values.
gdb/
PR symtab/14604
PR symtab/14605
* ada-lang.c (coerce_unspec_val_to_type): Use
value_contents_copy_raw.
* ada-valprint.c (val_print_packed_array_elements): Adjust.
* c-valprint.c (c_val_print): Use value_bits_any_optimized_out.
* cp-valprint.c (cp_print_value_fields): Let the common printing
code handle optimized out values.
(cp_print_value_fields_rtti): Use value_bits_any_optimized_out.
* d-valprint.c (dynamic_array_type): Use
value_bits_any_optimized_out.
* dwarf2loc.c (entry_data_value_funcs): Remove check_validity and
check_any_valid fields.
(check_pieced_value_bits): Delete and inline ...
(check_pieced_synthetic_pointer): ... here.
(check_pieced_value_validity): Delete.
(check_pieced_value_invalid): Delete.
(pieced_value_funcs): Remove check_validity and check_any_valid
fields.
(read_pieced_value): Use mark_value_bits_optimized_out.
(write_pieced_value): Switch to use
mark_value_bytes_optimized_out.
(dwarf2_evaluate_loc_desc_full): Copy the value contents instead
of assuming the whole value is optimized out.
* findvar.c (read_frame_register_value): Remove special handling
of optimized out registers.
(value_from_register): Use mark_value_bytes_optimized_out.
* frame-unwind.c (frame_unwind_got_optimized): Use
mark_value_bytes_optimized_out.
* jv-valprint.c (java_value_print): Adjust.
(java_print_value_fields): Let the common printing code handle
optimized out values.
* mips-tdep.c (mips_print_register): Remove special handling of
optimized out registers.
* opencl-lang.c (lval_func_check_validity): Delete.
(lval_func_check_any_valid): Delete.
(opencl_value_funcs): Remove check_validity and check_any_valid
fields.
* p-valprint.c (pascal_object_print_value_fields): Let the common
printing code handle optimized out values.
* stack.c (read_frame_arg): Remove special handling of optimized
out values. Fetch both VAL and ENTRYVAL before comparing
contents. Adjust to value_available_contents_eq rename.
* valprint.c (valprint_check_validity)
(val_print_scalar_formatted): Use value_bits_any_optimized_out.
(val_print_array_elements): Adjust.
* value.c (struct value) <optimized_out>: Now a VEC(range_s).
(value_bits_any_optimized_out): New function.
(value_entirely_covered_by_range_vector): New function, factored
out from value_entirely_unavailable.
(value_entirely_unavailable): Reimplement.
(value_entirely_optimized_out): New function.
(insert_into_bit_range_vector): New function, factored out from
mark_value_bits_unavailable.
(mark_value_bits_unavailable): Reimplement.
(struct ranges_and_idx): New struct.
(find_first_range_overlap_and_match): New function, factored out
from value_available_contents_bits_eq.
(value_available_contents_bits_eq): Rename to ...
(value_contents_bits_eq): ... this. Check both unavailable
contents and optimized out contents.
(value_available_contents_eq): Rename to ...
(value_contents_eq): ... this.
(allocate_value_lazy): Remove reference to the old optimized_out
boolean.
(allocate_optimized_out_value): Use
mark_value_bytes_optimized_out.
(require_not_optimized_out): Adjust to check whether the
optimized_out vec is empty.
(ranges_copy_adjusted): New function, factored out from
value_contents_copy_raw.
(value_contents_copy_raw): Also copy the optimized out ranges.
Assert the destination ranges aren't optimized out.
(value_contents_copy): Update comment, remove call to
require_not_optimized_out.
(value_contents_equal): Adjust to check whether the optimized_out
vec is empty.
(set_value_optimized_out, value_optimized_out_const): Delete.
(mark_value_bytes_optimized_out, mark_value_bits_optimized_out):
New functions.
(value_entirely_optimized_out, value_bits_valid): Delete.
(value_copy): Take a VEC copy of the 'optimized_out' field.
(value_primitive_field): Remove special handling of optimized out.
(value_fetch_lazy): Assert that lazy values have no unavailable
regions. Use value_bits_any_optimized_out. Remove some special
handling for optimized out values.
* value.h: Add intro comment about <optimized out> and
<unavailable>.
(struct lval_funcs): Remove check_validity and check_any_valid
fields.
(set_value_optimized_out, value_optimized_out_const): Remove.
(mark_value_bytes_optimized_out, mark_value_bits_optimized_out):
New declarations.
(value_bits_any_optimized_out): New declaration.
(value_bits_valid): Delete declaration.
(value_available_contents_eq): Rename to ...
(value_contents_eq): ... this, and extend comments.
gdb/testsuite/
PR symtab/14604
PR symtab/14605
* gdb.dwarf2/dw2-op-out-param.exp: Remove kfail branches and use
gdb_test.
echo 'void f(char *s){}main(){f((char *)1);}'|gcc -g -x c -;../gdb ./a.out -ex 'b f' -ex r
====ERROR: AddressSanitizer: heap-buffer-overflow on address 0x6020000aaccf at pc 0x96eea7 bp 0x7fff75bdbc90 sp 0x7fff75bdbc80
READ of size 1 at 0x6020000aaccf thread T0
#0 0x96eea6 in extract_unsigned_integer .../gdb/findvar.c:108
#1 0x9df02b in val_print_string .../gdb/valprint.c:2513
[...]
0x6020000aaccf is located 1 bytes to the left of 8-byte region [0x6020000aacd0,0x6020000aacd8)
allocated by thread T0 here:
#0 0x7f45fad26b97 in malloc (/lib64/libasan.so.1+0x57b97)
#1 0xdb3409 in xmalloc common/common-utils.c:45
#2 0x9d8cf9 in read_string .../gdb/valprint.c:1845
#3 0x9defca in val_print_string .../gdb/valprint.c:2502
[..]
====ABORTING
gdb/
2014-08-18 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix -fsanitize=address on unreadable inferior strings.
* valprint.c (val_print_string): Fix access before BUFFER.
This commit moves the inclusion of errno.h to common-defs.h and
removes all other inclusions. Note that prior to this commit
server.h included errno.h protected by "#ifdef HAVE_ERRNO_H".
This protection was added with the Windows CE port, which is
currently broken. Since no other platform needs this, I have
removed the protection and the configury to support it.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include errno.h.
* defs.h: Do not include errno.h.
* ada-typeprint.c: Likewise.
* c-typeprint.c: Likewise.
* core-regset.c: Likewise.
* corefile.c: Likewise.
* corelow.c: Likewise.
* event-loop.c: Likewise.
* f-typeprint.c: Likewise.
* gnu-nat.c: Likewise.
* go32-nat.c: Likewise.
* i386gnu-nat.c: Likewise.
* m2-typeprint.c: Likewise.
* nat/linux-btrace.c: Likewise.
* p-typeprint.c: Likewise.
* procfs.c: Likewise.
* remote-sim.c: Likewise.
* rs6000-nat.c: Likewise.
* target.c: Likewise.
* typeprint.c: Likewise.
* ui-file.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* configure.ac (AC_CHECK_HEADERS): Remove errno.h.
* configure: Regenerate.
* config.in: Likewise.
* server.h: Do not include errno.h.
* event-loop.c: Likewise.
* hostio-errno.c: Likewise.
* linux-low.c: Likewise.
* remote-utils.c: Likewise.
* spu-low.c: Likewise.
* utils.c: Likewise.
* gdbreplay.c: Unconditionally include errno.h.
Currently there are many calls to help_list that pass the constant -1
as the "class" value. However, the parameter is declared as being of
type enum command_class, and uses of the constant violate this
abstraction.
This patch fixes the error everywhere it occurs in the gdb sources.
Tested by rebuilding.
2014-06-13 Tom Tromey <tromey@redhat.com>
* cp-support.c (maint_cplus_command): Pass all_commands, not -1,
to help_list.
* guile/guile.c (info_guile_command): Pass all_commands, not -1,
to help_list.
* tui/tui-win.c (tui_command): Pass all_commands, not -1, to
help_list.
* tui/tui-regs.c (tui_reg_command): Pass all_commands, not -1, to
help_list.Pass all_commands, not -1, to help_list.
* cli/cli-dump.c (dump_command, append_command)
(srec_dump_command, ihex_dump_command, tekhex_dump_command)
(binary_dump_command, binary_append_command): Pass all_commands,
not -1, to help_list.
* cli/cli-cmds.c (info_command, set_debug): Pass all_commands, not
-1, to help_list.
* valprint.c (set_print, set_print_raw): Pass all_commands, not
-1, to help_list.
* typeprint.c (set_print_type): Pass all_commands, not -1, to
help_list.
* top.c (set_history): Pass all_commands, not -1, to help_list.
* target-descriptions.c (set_tdesc_cmd, unset_tdesc_cmd): Pass
all_commands, not -1, to help_list.
* symfile.c (overlay_command): Pass all_commands, not -1, to
help_list.
* spu-tdep.c (info_spu_command): Pass all_commands, not -1, to
help_list.
* serial.c (serial_set_cmd): Pass all_commands, not -1, to
help_list.
* ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Pass all_commands, not
-1, to help_list.
* remote.c (remote_command, set_remote_cmd): Pass all_commands,
not -1, to help_list.
* ravenscar-thread.c (set_ravenscar_command): Pass all_commands,
not -1, to help_list.
* maint.c (maintenance_command, maintenance_info_command)
(maintenance_print_command, maintenance_set_cmd): Pass
all_commands, not -1, to help_list.
* macrocmd.c (macro_command): Pass all_commands, not -1, to
help_list.
* language.c (set_check): Pass all_commands, not -1, to help_list.
* infcmd.c (unset_command): Pass all_commands, not -1, to
help_list.
* frame.c (set_backtrace_cmd): Pass all_commands, not -1, to
help_list.
* dwarf2read.c (set_dwarf2_cmd): Pass all_commands, not -1, to
help_list.
* dcache.c (set_dcache_command): Pass all_commands, not -1, to
help_list.
* breakpoint.c (save_command): Pass all_commands, not -1, to
help_list.
* ada-lang.c (maint_set_ada_cmd, set_ada_command): Pass
all_commands, not -1, to help_list.
Pierre proposed this patch
https://sourceware.org/ml/gdb-patches/2013-10/msg00011.html and
Tom gave a suggestion that it's better to do check \t in print_wchar
<https://sourceware.org/ml/gdb-patches/2013-11/msg00148.html>
However, I don't see the follow-up to this discussion.
We encounter two fails in printcmds.exp on mingw host, and Pierre's
patch fixes them. I pick it up, update a little per Tom's
comments, and post it here for review. This patch fixes these fails
below on mingw32 host.
FAIL: gdb.base/charset.exp: print string in ASCII
FAIL: gdb.base/charset.exp: try printing '\t' in ASCII
FAIL: gdb.base/charset.exp: print string in ISO-8859-1
FAIL: gdb.base/charset.exp: try printing '\t' in ISO-8859-1
FAIL: gdb.base/charset.exp: print string in UTF-32
FAIL: gdb.base/charset.exp: try printing '\t' in UTF-32
FAIL: gdb.base/printcmds.exp: p ctable1[9]
FAIL: gdb.base/printcmds.exp: p &ctable1[1*8]
Also regression tested on x86_64-linux. Is it OK?
gdb:
2014-05-16 Pierre Muller <muller@sourceware.org>
Yao Qi <yao@codesourcery.com>
* valprint.c (print_wchar): Move the code on checking whether
W is a printable wide char to the default branch of switch
statement below. Call wchar_printable instead of gdb_iswprint.
* gdbtypes.c (create_static_range_type): Renamed from create_range_type.
* gdbtypes.h (create_static_range_type): Renamed from create_range_type.
* ada-lang.c: All uses of create_range_type updated.
* coffread.c: All uses of create_range_type updated.
* dwarf2read.c: All uses of create_range_type updated.
* f-exp.y: All uses of create_range_type updated.
* m2-valprint.c: All uses of create_range_type updated.
* mdebugread.c: All uses of create_range_type updated.
* stabsread.c: All uses of create_range_type updated.
* valops.c: All uses of create_range_type updated.
* valprint.c: All uses of create_range_type updated.
This patch does the conversion of to_xfer_partial from
LONGEST (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len);
to
enum target_xfer_status (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len, ULONGEST *xfered_len);
It changes to_xfer_partial return the transfer status and the transfered
length by *XFERED_LEN. Generally, the return status has three stats,
- TARGET_XFER_OK,
- TARGET_XFER_EOF,
- TARGET_XFER_E_XXXX,
See the comments to them in 'enum target_xfer_status'. Note that
Pedro suggested not name TARGET_XFER_DONE, as it is confusing,
compared with "TARGET_XFER_OK". We finally name it TARGET_XFER_EOF.
With this change, GDB core can handle unavailable data in a convenient
way.
The rationale behind this change was mentioned here
https://sourceware.org/ml/gdb-patches/2013-10/msg00761.html
Consider an object/value like this:
0 100 150 200 512
DDDDDDDDDDDxxxxxxxxxDDDDDD...DDIIIIIIIIIIII..III
where D is valid data, and xxx is unavailable data, and I is beyond
the end of the object (Invalid). Currently, if we start the
xfer at 0, requesting, say 512 bytes, we'll first get back 100 bytes.
The xfer machinery then retries fetching [100,512), and gets back
TARGET_XFER_E_UNAVAILABLE. That's sufficient when you're either
interested in either having the whole of the 512 bytes available,
or erroring out. But, in this scenario, we're interested in
the data at [150,512). The problem is that the last
TARGET_XFER_E_UNAVAILABLE gives us no indication where to
start the read next. We'd need something like:
get me [0,512) >>>
<<< here's [0,100), *xfered_len is 100, returns TARGET_XFER_OK
get me [100,512) >>> (**1)
<<< [100,150) is unavailable, *xfered_len is 50, return TARGET_XFER_E_UNAVAILABLE.
get me [150,512) >>>
<<< here's [150,200), *xfered_len is 50, return TARGET_XFER_OK.
get me [200,512) >>>
<<< no more data, return TARGET_XFER_EOF.
This naturally implies pushing down the decision of whether
to return TARGET_XFER_E_UNAVAILABLE or something else
down to the target. (Which kinds of leads back to tfile
itself reading from RO memory from file (though we could
export a function in exec.c for that that tfile delegates to,
instead of re-adding the old code).
Beside this change, we also add a macro TARGET_XFER_STATUS_ERROR_P to
check whether a status is an error or not, to stop using "status < 0".
This patch also eliminates the comparison between status and 0.
No target implementations to to_xfer_partial adapts this new
interface. The interface still behaves as before.
gdb:
2014-02-11 Yao Qi <yao@codesourcery.com>
* target.h (enum target_xfer_error): Rename to ...
(enum target_xfer_status): ... it. New. All users updated.
(enum target_xfer_status) <TARGET_XFER_OK>, <TARGET_XFER_EOF>:
New.
(TARGET_XFER_STATUS_ERROR_P): New macro.
(target_xfer_error_to_string): Remove declaration.
(target_xfer_status_to_string): Declare.
(target_xfer_partial_ftype): Adjust it.
(struct target_ops) <to_xfer_partial>: Return
target_xfer_status. Add argument xfered_len. Update
comments.
* target.c (target_xfer_error_to_string): Rename to ...
(target_xfer_status_to_string): ... it. New. All callers
updated.
(target_read_live_memory): Likewise. Call target_xfer_partial
instead of target_read.
(memory_xfer_live_readonly_partial): Return
target_xfer_status. Add argument xfered_len.
(raw_memory_xfer_partial): Likewise.
(memory_xfer_partial_1): Likewise.
(memory_xfer_partial): Likewise.
(target_xfer_partial): Likewise. Check *XFERED_LEN is set
properly. Update debug message.
(default_xfer_partial, current_xfer_partial): Likewise.
(target_write_partial): Likewise.
(target_read_partial): Likewise. All callers updated.
(read_whatever_is_readable): Likewise.
(target_write_with_progress): Likewise.
(target_read_alloc_1): Likewise.
* aix-thread.c (aix_thread_xfer_partial): Likewise.
* auxv.c (procfs_xfer_auxv): Likewise.
(ld_so_xfer_auxv, memory_xfer_auxv): Likewise.
* bfd-target.c (target_bfd_xfer_partial): Likewise.
* bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
* bsd-uthread.c (bsd_uthread_xfer_partia): Likewise.
* corefile.c (read_memory): Adjust.
* corelow.c (core_xfer_partial): Likewise.
* ctf.c (ctf_xfer_partial): Likewise.
* darwin-nat.c (darwin_read_dyld_info): Likewise. All callers
updated.
(darwin_xfer_partial): Likewise.
* exec.c (section_table_xfer_memory_partial): Likewise. All
callers updated.
(exec_xfer_partial): Likewise.
* exec.h (section_table_xfer_memory_partial): Update
declaration.
* gnu-nat.c (gnu_xfer_memory): Likewise. Assert 'res' is not
negative.
(gnu_xfer_partial): Likewise.
* ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise.
(ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise.
(ia64_hpux_xfer_solib_got): Likewise.
* inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. Change
type of 'partial_len' to ULONGEST.
* inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
* linux-nat.c (linux_xfer_siginfo ): Likewise.
(linux_nat_xfer_partial): Likewise.
(linux_proc_xfer_partial, linux_xfer_partial): Likewise.
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise.
* monitor.c (monitor_xfer_memory): Likewise.
(monitor_xfer_partial): Likewise.
* procfs.c (procfs_xfer_partial): Likewise.
* record-btrace.c (record_btrace_xfer_partial): Likewise.
* record-full.c (record_full_xfer_partial): Likewise.
(record_full_core_xfer_partial): Likewise.
* remote-sim.c (gdbsim_xfer_memory): Likewise.
(gdbsim_xfer_partial): Likewise.
* remote.c (remote_write_bytes_aux): Likewise. All callers
updated.
(remote_write_bytes, remote_read_bytes): Likewise. All
callers updated.
(remote_flash_erase): Likewise. All callers updated.
(remote_write_qxfer): Likewise. All callers updated.
(remote_read_qxfer): Likewise. All callers updated.
(remote_xfer_partial): Likewise.
* rs6000-nat.c (rs6000_xfer_partial): Likewise.
(rs6000_xfer_shared_libraries): Likewise.
* sol-thread.c (sol_thread_xfer_partial): Likewise.
(sol_thread_xfer_partial): Likewise.
* sparc-nat.c (sparc_xfer_wcookie): Likewise.
(sparc_xfer_partial): Likewise.
* spu-linux-nat.c (spu_proc_xfer_spu): Likewise. All callers
updated.
(spu_xfer_partial): Likewise.
* spu-multiarch.c (spu_xfer_partial): Likewise.
* tracepoint.c (tfile_xfer_partial): Likewise.
* windows-nat.c (windows_xfer_memory): Likewise.
(windows_xfer_shared_libraries): Likewise.
(windows_xfer_partial): Likewise.
* valprint.c: Replace 'target_xfer_error' with
'target_xfer_status' in comments.
* configure.ac (libpython checking): Remove all but python.o from
CONFIG_OBS. Remove all but python.c from CONFIG_SRCS.
* configure: Regenerate.
* Makefile.in (SFILES): Add extension.c.
(HFILES_NO_SRCDIR): Add extension.h, extension-priv.h
(COMMON_OBS): Add extension.o.
* extension.h: New file.
* extension-priv.h: New file.
* extension.c: New file.
* python/python-internal.h: #include "extension.h".
(gdbpy_auto_load_enabled): Declare.
(gdbpy_apply_val_pretty_printer): Declare.
(gdbpy_apply_frame_filter): Declare.
(gdbpy_preserve_values): Declare.
(gdbpy_breakpoint_cond_says_stop): Declare.
(gdbpy_breakpoint_has_cond): Declare.
(void source_python_script_for_objfile): Delete.
* python/python.c: #include "extension-priv.h".
Delete inclusion of "observer.h".
(extension_language_python): Moved here and renamed from
script_language_python in py-auto-load.c.
Redefined to be of type extension_language_defn.
(python_extension_script_ops): New global.
(python_extension_ops): New global.
(struct python_env): New member previous_active.
(restore_python_env): Call restore_active_ext_lang.
(ensure_python_env): Call set_active_ext_lang.
(gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static.
New arg extlang.
(gdbpy_set_quit_flag): Renamed from set_quit_flag, made static.
New arg extlang.
(gdbpy_check_quit_flag): Renamed from check_quit_flag, made static.
New arg extlang.
(gdbpy_eval_from_control_command): Renamed from
eval_python_from_control_command, made static. New arg extlang.
(gdbpy_source_script) Renamed from source_python_script, made static.
New arg extlang.
(gdbpy_before_prompt_hook): Renamed from before_prompt_hook. Change
result to int. New arg extlang.
(gdbpy_source_objfile_script): Renamed from
source_python_script_for_objfile, made static. New arg extlang.
(gdbpy_start_type_printers): Renamed from start_type_printers, made
static. New args extlang, extlang_printers. Change result type to
"void".
(gdbpy_apply_type_printers): Renamed from apply_type_printers, made
static. New arg extlang. Rename arg printers to extlang_printers
and change type to ext_lang_type_printers *.
(gdbpy_free_type_printers): Renamed from free_type_printers, made
static. Replace argument arg with extlang, extlang_printers.
(!HAVE_PYTHON, eval_python_from_control_command): Delete.
(!HAVE_PYTHON, source_python_script): Delete.
(!HAVE_PYTHON, gdbpy_should_stop): Delete.
(!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete.
(!HAVE_PYTHON, start_type_printers): Delete.
(!HAVE_PYTHON, apply_type_printers): Delete.
(!HAVE_PYTHON, free_type_printers): Delete.
(_initialize_python): Delete call to observer_attach_before_prompt.
(finalize_python): Set/restore active extension language.
(gdbpy_finish_initialization) Renamed from
finish_python_initialization, made static. New arg extlang.
(gdbpy_initialized): New function.
* python/python.h: #include "extension.h". Delete #include
"value.h", "mi/mi-cmds.h".
(extension_language_python): Declare.
(GDBPY_AUTO_FILE_NAME): Delete.
(enum py_bt_status): Moved to extension.h and renamed to
ext_lang_bt_status.
(enum frame_filter_flags): Moved to extension.h.
(enum py_frame_args): Moved to extension.h and renamed to
ext_lang_frame_args.
(finish_python_initialization): Delete.
(eval_python_from_control_command): Delete.
(source_python_script): Delete.
(apply_val_pretty_printer): Delete.
(apply_frame_filter): Delete.
(preserve_python_values): Delete.
(gdbpy_script_language_defn): Delete.
(gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete.
(start_type_printers, apply_type_printers, free_type_printers): Delete.
* auto-load.c: #include "extension.h".
(GDB_AUTO_FILE_NAME): Delete.
(auto_load_gdb_scripts_enabled): Make public. New arg extlang.
(script_language_gdb): Delete, moved to extension.c and renamed to
extension_language_gdb.
(source_gdb_script_for_objfile): Delete.
(auto_load_pspace_info): New member unsupported_script_warning_printed.
(loaded_script): Change type of language member to
struct extension_language_defn *.
(init_loaded_scripts_info): Initialize
unsupported_script_warning_printed.
(maybe_add_script): Make static. Change type of language arg to
struct extension_language_defn *.
(clear_section_scripts): Reset unsupported_script_warning_printed.
(auto_load_objfile_script_1): Rewrite to use extension language API.
(auto_load_objfile_script): Make public. Remove support-compiled-in
and auto-load-enabled checks, moved to auto_load_scripts_for_objfile.
(source_section_scripts): Rewrite to use extension language API.
(load_auto_scripts_for_objfile): Rewrite to use
auto_load_scripts_for_objfile.
(collect_matching_scripts_data): Change type of language member to
struct extension_language_defn *.
(auto_load_info_scripts): Change type of language arg to
struct extension_language_defn *.
(unsupported_script_warning_print): New function.
(script_not_found_warning_print): Make static.
(_initialize_auto_load): Rewrite construction of scripts-directory
help.
* auto-load.h (struct objfile): Add forward decl.
(struct script_language): Delete.
(struct auto_load_pspace_info): Add forward decl.
(struct extension_language_defn): Add forward decl.
(maybe_add_script): Delete.
(auto_load_objfile_script): Declare.
(script_not_found_warning_print): Delete.
(auto_load_info_scripts): Update prototype.
(auto_load_gdb_scripts_enabled): Declare.
* python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from
auto_load_python_scripts_enabled and made public.
(script_language_python): Delete, moved to python.c.
(gdbpy_script_language_defn): Delete.
(info_auto_load_python_scripts): Update to use
extension_language_python.
* breakpoint.c (condition_command): Replace call to
gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang.
(bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop
with call to breakpoint_ext_lang_cond_says_stop.
* python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed
from gdbpy_should_stop. Change result type to enum scr_bp_stop.
New arg slang. Return SCR_BP_STOP_UNSET if py_bp_object is NULL.
(gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond.
New arg slang.
(local_setattro): Print name of extension language with existing
stop condition.
* valprint.c (val_print, value_print): Update to call
apply_ext_lang_val_pretty_printer.
* cp-valprint.c (cp_print_value): Update call to
apply_ext_lang_val_pretty_printer.
* python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON.
(gdbpy_apply_val_pretty_printer): Renamed from
apply_val_pretty_printer. New arg extlang.
(!HAVE_PYTHON, apply_val_pretty_printer): Delete.
* cli/cli-cmds.c (source_script_from_stream): Rewrite to use
extension language API.
* cli/cli-script.c (execute_control_command): Update to call
eval_ext_lang_from_control_command.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use
enum ext_lang_bt_status values. Update call to
apply_ext_lang_frame_filter.
(mi_cmd_stack_list_locals): Ditto.
(mi_cmd_stack_list_args): Ditto.
(mi_cmd_stack_list_variables): Ditto.
* mi/mi-main.c: Delete #include "python/python-internal.h".
Add #include "extension.h".
(mi_cmd_list_features): Replace reference to python internal variable
gdb_python_initialized with call to ext_lang_initialized_p.
* stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status.
Update to use enum ext_lang_frame_args. Update to call
apply_ext_lang_frame_filter.
* python/py-framefilter.c (extract_sym): Update to use enum
ext_lang_bt_status.
(extract_value, py_print_type, py_print_value): Ditto.
(py_print_single_arg, enumerate_args, enumerate_locals): Ditto.
(py_mi_print_variables, py_print_locals, py_print_args): Ditto.
(py_print_frame): Ditto.
(gdbpy_apply_frame_filter): Renamed from apply_frame_filter.
New arg extlang. Update to use enum ext_lang_bt_status.
* top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to
finish_python_initialization. Replace with call to
finish_ext_lang_initialization.
* typeprint.c (do_free_global_table): Update to call
free_ext_lang_type_printers.
(create_global_typedef_table): Update to call
start_ext_lang_type_printers.
(find_global_typedef): Update to call apply_ext_lang_type_printers.
* typeprint.h (struct ext_lang_type_printers): Add forward decl.
(type_print_options): Change type of global_printers from "void *"
to "struct ext_lang_type_printers *".
* value.c (preserve_values): Update to call preserve_ext_lang_values.
* python/py-value.c: Remove #ifdef HAVE_PYTHON.
(gdbpy_preserve_values): Renamed from preserve_python_values.
New arg extlang.
(!HAVE_PYTHON, preserve_python_values): Delete.
* utils.c (quit_flag): Delete, moved to extension.c.
(clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to
extension.c.
* eval.c: Delete #include "python/python.h".
* main.c: Delete #include "python/python.h".
* defs.h: Update comment.
testsuite/
* gdb.python/py-breakpoint.exp (test_bkpt_eval_funcs): Update expected
output.
* gdb.gdb/python-interrupts.exp: New file.
Doing "info frame" in the outermost frame, when that was indicated by
the next frame saying the unwound PC is undefined/not saved, results
in error and incomplete output:
(gdb) bt
#0 thread_function0 (arg=0x0) at threads.c:63
#1 0x00000034cf407d14 in start_thread (arg=0x7ffff7fcb700) at pthread_create.c:309
#2 0x000000323d4f168d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:115
(gdb) frame 2
#2 0x000000323d4f168d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:115
115 call *%rax
(gdb) info frame
Stack level 2, frame at 0x0:
rip = 0x323d4f168d in clone (../sysdeps/unix/sysv/linux/x86_64/clone.S:115); saved rip Register 16 was not saved
(gdb)
Not saved register values are treated as optimized out values
internally throughout. stack.c:frame_info is handing unvailable
values, but not optimized out ones. The patch deletes the
frame_unwind_caller_pc_if_available wrapper function and instead lets
errors propagate to frame_info (it's only user).
As frame_unwind_pc now needs to be able to handle and cache two
different error scenarios, the prev_pc.p variable is replaced with an
enumeration.
(FWIW, I looked into making gdbarch_unwind_pc or a variant return
struct value's instead, but it results in lots of boxing and unboxing
for no real gain -- e.g., the mips and arm implementations need to do
computation on the unboxed PC value. Might as well throw an error on
first attempt to get at invalid contents.)
After the patch, we get:
(gdb) info frame
Stack level 2, frame at 0x0:
rip = 0x323d4f168d in clone (../sysdeps/unix/sysv/linux/x86_64/clone.S:115); saved rip = <not saved>
Outermost frame: outermost
caller of frame at 0x7ffff7fcafc0
source language asm.
Arglist at 0x7ffff7fcafb8, args:
Locals at 0x7ffff7fcafb8, Previous frame's sp is 0x7ffff7fcafc8
(gdb)
A new test is added. It's based off dw2-reg-undefined.exp, and tweaked to
mark the return address (rip) of "stop_frame" as undefined.
Tested on x86_64 Fedora 17.
gdb/
2013-12-06 Pedro Alves <palves@redhat.com>
* frame.c (enum cached_copy_status): New enum.
(struct frame_info) <prev_pc.p>: Change type to enum
cached_copy_status.
(fprint_frame): Handle not saved and unavailable prev_pc values.
(frame_unwind_pc_if_available): Delete and merge contents into ...
(frame_unwind_pc): ... here. Handle OPTIMIZED_OUT_ERROR. Adjust
to use enum cached_copy_status.
(frame_unwind_caller_pc_if_available): Delete.
(create_new_frame): Adjust.
* frame.h (frame_unwind_caller_pc_if_available): Delete
declaration.
* stack.c (frame_info): Use frame_unwind_caller_pc instead of
frame_unwind_caller_pc_if_available, and handle
NOT_AVAILABLE_ERROR and OPTIMIZED_OUT_ERROR errors.
* valprint.c (val_print_optimized_out): Use val_print_not_saved.
(val_print_not_saved): New function.
* valprint.h (val_print_not_saved): Declare.
gdb/testsuite/
2013-12-06 Pedro Alves <palves@redhat.com>
* gdb.dwarf2/dw2-undefined-ret-addr.S: New file.
* gdb.dwarf2/dw2-undefined-ret-addr.c: New file.
* gdb.dwarf2/dw2-undefined-ret-addr.exp: New file.
When printing an entirely optimized out structure/class/union, we
print a single <optimized out> instead of printing <optimized out> for
each field.
This patch makes an entirely unavailable structure/class/union be
likewise displayed with a single "<unavailable>" rather than the whole
object with all fields <unavailable>.
This seems good because this way the user can quickly tell whether the
whole value is unavailable, rather than having to skim all fields.
Consistency with optimized out values also seems to be a good thing to
have.
A few updates to gdb.trace/unavailable.exp where required.
Tested on x86_64 Fedora 17, native gdbserver.
gdb/
2013-11-28 Andrew Burgess <aburgess@broadcom.com>
Pedro Alves <palves@redhat.com>
* valprint.c (value_check_printable): If the value is entirely
unavailable, print a single "<unavailable>" instead of printing
all subfields.
gdb/testsuite/
2013-11-28 Andrew Burgess <aburgess@broadcom.com>
* gdb.trace/unavailable.exp (gdb_collect_args_test): Update
expected results.
(gdb_collect_locals_test): Likewise.
(gdb_collect_globals_test): Likewise.
PR gdb/16196:
* valprint.c (read_string): Set new variable fetchlen based on
fetchlimit and size. Use it in call to partial_memory_read.
Update comment.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
target_read_memory & friends build on top of target_read (thus on top
of the target_xfer machinery), but turn all errors to EIO, an errno
value. I think we'd better convert all these to return a
target_xfer_error too, like target_xfer_partial in a previous patch.
The patch starts by doing that.
(The patch does not add a enum target_xfer_error value for '0'/no
error, and likewise does not change the return type of several of
these functions to enum target_xfer_error, because different functions
return '0' with different semantics.)
I audited the tree for memory_error calls, EIO checks, places where
GDB hardcodes 'errno = EIO', and also for strerror calls. What I
found is that nowadays there's really no need to handle random errno
values, other than the EIOs gdb itself hardcodes. No doubt errno
values would appear in common code back in the day when
target_xfer_memory was the main interface to access memory, but
nowadays, any errno value that deprecated interface could return is
just absorved by default_xfer_partial:
else if (xfered == 0 && errno == 0)
/* "deprecated_xfer_memory" uses 0, cross checked against
ERRNO as one indication of an error. */
return 0;
else
return -1;
There are two places in the code that check for EIO and print "out of
bounds", and defer to strerror for other errors. That's
c-lang.c:c_get_string, and valprint.c.:val_print_string. AFAICT, the
strerror branch can never be reached nowadays, as the only error
possible to get at those points is EIO, given that it's GDB itself
that set that errno value (in target_read_memory, etc.).
breakpoint.c:insert_bp_location always prints the error val as if an
errno, returned by target_insert_breakpoint, with strerr. Now the
error here is either always EIO for mem-break.c targets (again
hardcoded by the target_read_memory/target_write_memory functions), so
this always prints "Input/output error" or similar (depending on
host), or, for remote targets (and probably others), this gem:
Error accessing memory address 0x80200400: Unknown error -1.
This patch makes these 3 places print the exact same error
memory_error prints. This changes output, but I think this is better,
for making memory error output consistent with other commands, and, it
means we have a central place to tweak for memory errors.
E.g., this changes:
Cannot insert breakpoint 1.
Error accessing memory address 0x5fc660: Input/output error.
to:
Cannot insert breakpoint 1.
Cannot access memory at address 0x5fc660
Which I find pretty much acceptable.
Surprisingly, only py-prettyprint.exp had a regression, for needing an
adjustment. I also grepped the testsuite for the old errors, and
found no other hits.
Now that errno values aren't used anywhere in any of these memory
access related routines, I made memory_error itself take a
target_xfer_error instead of an errno. The new
target_xfer_memory_error function added recently is no longer
necessary, and is thus removed.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2013-10-09 Pedro Alves <palves@redhat.com>
* breakpoint.c (insert_bp_location): Use memory_error_message to
build the memory error string.
* c-lang.c: Include "gdbcore.h".
(c_get_string): Use memory_error to throw error.
(target_xfer_memory_error): Delete.
(memory_error_message): New, factored out from
target_xfer_memory_error.
(memory_error): Change parameter type to target_xfer_error.
Rewrite.
(read_memory): Use memory_error instead of
target_xfer_memory_error.
* gdbcore.h: Include "target.h".
(memory_error): Change parameter type to target_xfer_error.
(memory_error_message): Declare function.
* target.c (target_read_memory, target_read_stack)
(target_write_memory, target_write_raw_memory): Return
TARGET_XFER_E_IO on error. Adjust comments.
(get_target_memory): Pass TARGET_XFER_E_IO to memory_error,
instead of EIO.
* target.h (target_read, target_insert_breakpoint)
(target_remove_breakpoint): Adjust comments.
* valprint.c (partial_memory_read): Rename parameter, and adjust
comment.
(val_print_string): Use memory_error_message to build the memory
error string.
gdb/testsuite/
2013-10-09 Pedro Alves <palves@redhat.com>
* gdb.python/py-prettyprint.exp (run_lang_tests): Adjust expected
output.
Currently, in some scenarios, GDB prints <optimized out> when printing
outer frame registers. An <optimized out> register is a confusing
concept. What this really means is that the register is
call-clobbered, or IOW, not saved by the callee. This patch makes GDB
say that instead.
Before patch:
(gdb) p/x $rax $1 = <optimized out>
(gdb) info registers rax
rax <optimized out>
After patch:
(gdb) p/x $rax
$1 = <not saved>
(gdb) info registers rax
rax <not saved>
However, if for some reason the debug info describes a variable as
being in such a register (**), we still want to print <optimized out>
when printing the variable. IOW, <not saved> is reserved for
inspecting registers at the machine level. The patch uses
lval_register+optimized_out to encode the not saved registers, and
makes it so that optimized out variables always end up in
!lval_register values.
** See <https://sourceware.org/ml/gdb-patches/2012-08/msg00787.html>.
Current/recent enough GCC doesn't mark variables/arguments as being in
call-clobbered registers in the ranges corresponding to function
calls, while older GCCs did. Newer GCCs will just not say where the
variable is, so GDB will end up realizing the variable is optimized
out.
frame_unwind_got_optimized creates not_lval optimized out registers,
so by default, in most cases, we'll see <optimized out>.
value_of_register is the function eval.c uses for evaluating
OP_REGISTER (again, $pc, etc.), and related bits. It isn't used for
anything else. This function makes sure to return lval_register
values. The patch makes "info registers" and the MI equivalent use it
too. I think it just makes a lot of sense, as this makes it so that
when printing machine registers ($pc, etc.), we go through a central
function.
We're likely to need a different encoding at some point, if/when we
support partially saved registers. Even then, I think
value_of_register will still be the spot to tag the intention to print
machine register values differently.
value_from_register however may also return optimized out
lval_register values, so at a couple places where we're computing a
variable's location from a dwarf expression, we convert the resulting
value away from lval_register to a regular optimized out value.
Tested on x86_64 Fedora 17
gdb/
2013-10-02 Pedro Alves <palves@redhat.com>
* cp-valprint.c (cp_print_value_fields): Adjust calls to
val_print_optimized_out.
* jv-valprint.c (java_print_value_fields): Likewise.
* p-valprint.c (pascal_object_print_value_fields): Likewise.
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full)
<DWARF_VALUE_REGISTER>: If the register was not saved, return a
new optimized out value.
* findvar.c (address_from_register): Likewise.
* frame.c (put_frame_register): Tweak error string to say the
register was not saved, rather than optimized out.
* infcmd.c (default_print_one_register_info): Adjust call to
val_print_optimized_out. Use value_of_register instead of
get_frame_register_value.
* mi/mi-main.c (output_register): Use value_of_register instead of
get_frame_register_value.
* valprint.c (valprint_check_validity): Likewise.
(val_print_optimized_out): New value parameter. If the value is
lval_register, print <not saved> instead.
(value_check_printable, val_print_scalar_formatted): Adjust calls
to val_print_optimized_out.
* valprint.h (val_print_optimized_out): New value parameter.
* value.c (struct value) <optimized_out>: Extend comment.
(error_value_optimized_out): New function.
(require_not_optimized_out): Use it. Use a different string for
lval_register values.
* value.h (error_value_optimized_out): New declaration.
* NEWS: Mention <not saved>.
gdb/testsuite/
2013-10-02 Pedro Alves <palves@redhat.com>
* gdb.dwarf2/dw2-reg-undefined.exp <pattern_rax_rbx_rcx_print,
pattern_rax_rbx_rcx_info>: Set to "<not saved>".
* gdb.mi/mi-reg-undefined.exp (opt_out_pattern): Delete.
(not_saved_pattern): New.
Replace use of the former with the latter.
gdb/doc/
2013-10-02 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Registers): Expand description of saved registers
in frames. Explain <not saved>.
This is the patch to add new option '--skip-unavailable' to MI
commands '-stack-list-{locals, arguments, variables}'. This patch
extends list_args_or_locals to add a new parameter 'skip_unavailable',
and don't list locals or arguments if values are unavailable and
'skip_unavailable' is true.
This is inspecting a trace frame (tfind mode), where only a few
locals have been collected.
-stack-list-locals, no switch vs new switch:
-stack-list-locals --simple-values
^done,locals=[{name="array",type="unsigned char [2]"},{name="i",type="int",value="<unavailable>"}]
-stack-list-locals --skip-unavailable --simple-values
^done,locals=[{name="array",type="unsigned char [2]"}]
-stack-list-arguments, no switch vs new switch:
-stack-list-arguments --simple-values
^done,stack-args=[frame={level="0",args=[{name="j",type="int",value="4"},{name="s",type="char *",value="<unavailable>"}]},frame={level="1",args=[]}]
-stack-list-arguments --skip-unavailable --simple-values
^done,stack-args=[frame={level="0",args=[{name="j",type="int",value="4"}]},frame={level="1",args=[]}]
-stack-list-variables, no switch vs new switch:
-stack-list-variables --simple-values
^done,variables=[{name="j",arg="1",type="int",value="4"},{name="s",arg="1",type="char *",value="<unavailable>"},{name="array",type="unsigned char [2]"},{name="i",type="int",value="<unavailable>"}]
-stack-list-variables --skip-unavailable --simple-values
^done,variables=[{name="j",arg="1",type="int",value="4"},{name="array",type="unsigned char [2]"}]
tests are added to test these new options.
gdb:
2013-08-27 Pedro Alves <pedro@codesourcery.com>
Yao Qi <yao@codesourcery.com>
* mi/mi-cmd-stack.c (list_args_or_locals): Adjust prototype.
(parse_no_frames_option): Remove.
(mi_cmd_stack_list_locals): Handle --skip-unavailable.
(mi_cmd_stack_list_args): Adjust.
(mi_cmd_stack_list_variables): Handle --skip-unavailable.
(list_arg_or_local): Add new parameter 'skip_unavailable'. Return
early if SKIP_UNAVAILABLE is true and ARG->val is unavailable.
Caller update.
(list_args_or_locals): New parameter 'skip_unavailable'.
Handle it.
* valprint.c (scalar_type_p): Rename to ...
(val_print_scalar_type_p): ... this. Make extern.
(val_print, value_check_printable): Adjust.
* valprint.h (val_print_scalar_type_p): Declare.
* value.c (value_entirely_unavailable): New function.
* value.h (value_entirely_unavailable): Declare.
* NEWS: Mention the new option "--skip-unavailable" to MI
commands '-stack-list-locals', '-stack-list-arguments' and
'-stack-list-variables'.
gdb/doc:
2013-08-27 Pedro Alves <pedro@codesourcery.com>
Yao Qi <yao@codesourcery.com>
* gdb.texinfo (GDB/MI Stack Manipulation) <-stack-list-locals>:
Document new --skip-unavailable option.
<-stack-list-variables>: Document new --skip-unavailable option.
gdb/testsuite:
2013-08-27 Yao Qi <yao@codesourcery.com>
* gdb.trace/entry-values.exp: Test unavailable entry value is
not shown when option '--skip-unavailable' is specified.
* gdb.trace/mi-trace-unavailable.exp (test_trace_unavailable):
Add tests for new option '--skip-unavailable'.
Enum values rename as well. All uses updated.
* valprint.h (value_print_options): Rename member pretty to
pretty format. Rename member prettyprint_arrays to
prettyformat_arrays. Rename member prettyprint_structs to
prettyformat_structs. All uses updated.
(get_no_prettyformat_print_options): Renamed from
get_raw_print_options.
* valprint.c (get_no_prettyformat_print_options): Renamed from
get_raw_print_options. All callers updated.
(show_prettyformat_structs): Renamed from show_prettyprint_structs.
All callers updated.
(show_prettyformat_arrays): Renamed from show_prettyprint_arrays.
All callers updated.
(_initialize_valprint): Improve help text for "set print pretty" and
"set print arrays".
testsuite/
* gdb.base/default.exp: Update expected output of "show print array"
and "show print pretty".
Currently, several commands take "0" or "-1" to mean "unlimited".
"show" knows when to print "unlimited":
(gdb) show height
Number of lines gdb thinks are in a page is 45.
(gdb) set height 0
(gdb) show height
Number of lines gdb thinks are in a page is unlimited.
However, the user can't herself specify "unlimited" directly:
(gdb) set height unlimited
No symbol table is loaded. Use the "file" command.
(gdb)
This patch addresses that, by adjusting the set handler for all
integer/uinteger/zuinteger_unlimited commands to accept literal
"unlimited". It also installs a completer. Presently, we complete on
symbols by default, and at
<http://sourceware.org/ml/gdb-patches/2013-03/msg00864.html> I've
shown a WIP prototype that tried to keep that half working in these
commands. In the end, it turned out to be more complicated than
justifiable, IMO. It's super rare to want to pass the value of a
variable/symbol in the program to a GDB set/show knob. That'll still
work, it's just that we won't assist with completion anymore. This
patch just sticks with the simple, and completes on "unlimited", and
nothing else. This simplification means that
"set he<tab><tab>"
is all it takes to get to:
"set height unlimited"
The patch then goes through all integer/uinteger/zuinteger_unlimited
commands in the tree, and updates both the online help and the manual
to mention that "unlimited" is accepted in addition to 0/-1. In the
cases where the command had no online help text at all, this adds it.
I've tried to make the texts read in a way that "unlimited" is
suggested before "0" or "-1" is.
Tested on x86_64 Fedora 17.
gdb/
2013-04-10 Pedro Alves <palves@redhat.com>
* cli/cli-decode.c (integer_unlimited_completer): New function.
(add_setshow_integer_cmd, add_setshow_uinteger_cmd)
(add_setshow_zuinteger_unlimited_cmd): Install the "unlimited"
completer.
* cli/cli-setshow.c: Include "cli/cli-utils.h".
(is_unlimited_literal): New function.
(do_set_command): Handle literal "unlimited" arguments.
* frame.c (_initialize_frame) <set backtrace limit>: Document
"unlimited".
* printcmd.c (_initialize_printcmd) <set print
max-symbolic-offset>: Add help text.
* record-full.c (_initialize_record_full) <set record full
insn-number-max>: Likewise.
* record.c (_initialize_record) <set record
instruction-history-size, set record function-call-history-size>:
Add help text.
* ser-tcp.c (_initialize_ser_tcp) <set tcp connect-timeout>: Add
help text.
* tracepoint.c (_initialize_tracepoint) <set trace-buffer-size>:
Likewise.
* source.c (_initialize_source) <set listsize>: Add help text.
* utils.c (initialize_utils) <set height, set width>: Likewise.
<set pagination>: Mention "set height unlimited".
* valprint.c (_initialize_valprint) <set print elements, set print
repeats>: Document "unlimited".
gdb/doc/
2013-04-10 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Process Record and Replay): Document that "set
record full insn-number-max", "set record
instruction-history-size" and "set record
function-call-history-size" accept "unlimited".
(Backtrace): Document that "set backtrace limit" accepts
"unlimited".
(List): Document that "set listsize" accepts "unlimited".
(Print Settings)" Document that "set print max-symbolic-offset",
"set print elements" and "set print repeats" accept "unlimited".
(Starting and Stopping Trace Experiments): Document that "set
trace-buffer-size" accepts "unlimited".
(Remote Configuration): Document that "set tcp connect-timeout"
accepts "unlimited".
(Command History): Document that "set history size" accepts
"unlimited".
(Screen Size): Document that "set height" and "set width" accepts
"unlimited". Adjust "set pagination"'s description to suggest
"set height unlimited" instead of "set height 0".
gdb/testsuite/
2013-04-10 Pedro Alves <palves@redhat.com>
* gdb.base/completion.exp: Test "set height", "set listsize" and
"set trace-buffer-size" completion.
* gdb.base/setshow.exp: Test "set height unlimited".
* gdb.trace/trace-buffer-size.exp: Test "set trace-buffer-size
unlimited".
Trimmed for brevity:
$ make WERROR_CFLAGS="-Wpointer-sign -Werror" c-lang.o expprint.o utils.o valprint.o varobj.o -k 2>&1 1>/dev/null
../../src/gdb/c-lang.c: In function ‘parse_one_string’:
../../src/gdb/c-lang.c:540:8: error: pointer targets in passing argument 3 of ‘convert_between_encodings’ differ in signedness [-Werror=pointer-sign]
In file included from ../../src/gdb/c-lang.c:30:0:
../../src/gdb/charset.h:64:6: note: expected ‘const gdb_byte *’ but argument is of type ‘char *’
../../src/gdb/expprint.c: In function ‘print_subexp_standard’:
../../src/gdb/expprint.c:205:2: error: pointer targets in passing argument 3 of ‘current_language->la_printstr’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/expprint.c:205:2: note: expected ‘const gdb_byte *’ but argument is of type ‘char *’
cc1: all warnings being treated as errors
make: *** [expprint.o] Error 1
../../src/gdb/utils.c: In function ‘host_char_to_target’:
../../src/gdb/utils.c:1474:9: error: pointer targets in passing argument 3 of ‘convert_between_encodings’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/varobj.c: In function ‘value_get_print_value’:
../../src/gdb/varobj.c:2934:8: error: pointer targets in return differ in signedness [-Werror=pointer-sign]
../../src/gdb/varobj.c:2968:12: error: pointer targets in assignment differ in signedness [-Werror=pointer-sign]
../../src/gdb/varobj.c:2971:3: error: pointer targets in return differ in signedness [-Werror=pointer-sign]
cc1: all warnings being treated as errors
make: *** [varobj.o] Error 1
As with the previous patch, the encoding conversion code works with
gdb_byte arrays as the generic buffers that hold strings of any
encoding/width. This patch adds casts where appropriate.
gdb/
2013-03-07 Pedro Alves <palves@redhat.com>
* c-lang.c (parse_one_string): Cast argument to gdb_byte *.
* expprint.c (print_subexp_standard): Likewise.
* utils.c (host_char_to_target): Likewise.
* valprint.c (generic_emit_char, generic_printstr): Likewise.
* varobj.c (value_get_print_value): Change type of local to char*.
Cast it gdb_byte * in call to language printer.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
* c-valprint.c (c_val_print): For character arrays
with "print null" option on, print ellipses if
the output is truncated and the next character is not \000.
* valprint.c (MAX_WCHARS): Define.
(WCHAR_BUFLEN): Likewise.
(WCHAR_BUFLEN_MAX): Likewise.
(struct converted_character): New structure.
(count_next_character): New function.
(print_converted_chars_to_obstack): New function.
(generic_printstr): Rewrite using count_next_character
and print_converted_chars_to_obstack.
* gdb.base/printcmds.c: Add invalid_XXX globals
for repeated byte tests.
* gdb.base/printcmds.exp (test_repeat_bytes): New procedure.
* gdb.base/wchar.c (main): Add and construct a wchar_t
array with repeated characters.
* gdb.base/wchar.exp: Add repeated character tests.
* p-valprint.c (pascal_val_print) <TYPE_CODE_PTR>: Optionally
print space before string or vtbl.
* m2-valprint.c (print_unpacked_pointer): Optionally print space
before string.
* jv-valprint.c (java_value_print): Print space before string.
* go-valprint.c (print_go_string): Print space before string.
* f-valprint.c (f_val_print) <TYPE_CODE_PTR>: Optionally print
space before string.
* c-valprint.c (c_val_print) <TYPE_CODE_PTR>: Optionally print
space before string or vtbl.
* auxv.c (fprint_target_auxv): Print space after address.
PR symtab/7259:
* ada-exp.y (convert_char_literal): Use TYPE_FIELD_ENUMVAL.
* ada-lang.c (ada_discrete_type_high_bound)
(ada_discrete_type_low_bound): Use TYPE_FIELD_ENUMVAL for
TYPE_CODE_ENUM.
(ada_identical_enum_types_p): Use TYPE_FIELD_ENUMVAL.
(pos_atr, value_val_atr): Use TYPE_FIELD_ENUMVAL for TYPE_CODE_ENUM.
* ada-typeprint.c (print_enum_type): Change variable lastval to LONGEST.
Use TYPE_FIELD_ENUMVAL.
* ada-valprint.c (print_optional_low_bound, ada_print_scalar)
(ada_val_print_1): Use TYPE_FIELD_ENUMVAL for TYPE_CODE_ENUM.
* c-typeprint.c (c_type_print_base): Move variable lastval to inner
block, change it to LONGEST. Use TYPE_FIELD_ENUMVAL for
TYPE_CODE_ENUM.
* coffread.c (coff_read_enum_type): Use SET_FIELD_ENUMVAL.
* dwarf2read.c (process_enumeration_scope): Likewise.
* gdb-gdb.py (TypeFlagsPrinter): Use field.enumval instead of
field.bitpos.
(class StructMainTypePrettyPrinter): Support also
FIELD_LOC_KIND_ENUMVAL.
* gdbtypes.c (get_discrete_bounds): Use TYPE_FIELD_ENUMVAL for
TYPE_CODE_ENUM.
(recursive_dump_type): Use TYPE_FIELD_ENUMVAL for TYPE_CODE_ENUM.
(copy_type_recursive): Support also FIELD_LOC_KIND_ENUMVAL.
* gdbtypes.h (enum field_loc_kind): New FIELD_LOC_KIND_ENUMVAL.
(struct main_type.flds_bnds.fields.loc): Adjust bitpos comment. New
field enumval.
(struct main_type.flds_bnds.bields): Adjust loc_kind and bitsize to
accommodate enumval.
(struct call_site): Adjust loc_kind to accommodate enumval.
(FIELD_ENUMVAL, FIELD_ENUMVAL_LVAL, SET_FIELD_ENUMVAL)
(TYPE_FIELD_ENUMVAL): New macros.
* m2-typeprint.c (m2_enum): Use TYPE_FIELD_ENUMVAL.
* mdebugread.c (parse_symbol): Use TYPE_FIELD_ENUMVAL for
TYPE_CODE_ENUM.
* p-typeprint.c (pascal_type_print_base): Likewise.
* python/lib/gdb/printing.py (class FlagEnumerationPrinter): Use
enumval.
* python/lib/gdb/types.py (make_enum_dict): Likewise.
* python/py-type.c (convert_field): New variable addrstring. Use
TYPE_FIELD_ENUMVAL for TYPE_CODE_ENUM.
(check_types_equal): Support also FIELD_LOC_KIND_ENUMVAL.
* stabsread.c (read_enum_type): Use SET_FIELD_ENUMVAL.
* typepint.c (print_type_scalar): Use TYPE_FIELD_ENUMVAL for
TYPE_CODE_ENUM.
* valprint.c (generic_val_print): Likewise.
gdb/testsuite/
PR symtab/7259:
* gdb.base/enumval.c: New test case.
* gdb.base/enumval.exp: New test case.
* gdb.python/py-type.exp (test_enums): Use field.enumval instead of
field.bitpos.
* valprint.c (value_check_printable): Add one parameter OPTIONS.
Honor OPTIONS and VAL's type.
(common_val_print, value_print): Update to pass one more parameter.
* valprint.c (val_print_array_elements): Fixed poor performance
of printing very large arrays with repeat_count_threshold set
to unlimited. New comment.
* exceptions.h (NOT_AVAILABLE_ERROR): New error.
* value.c: Include "exceptions.h".
(require_available): Throw NOT_AVAILABLE_ERROR instead of a
generic error.
* cp-abi.c: Include gdb_assert.h.
(baseclass_offset): Add `embedded_offset' and `val' parameters.
Assert the method is implemented. Wrap NOT_AVAILABLE_ERROR
errors.
* cp-abi.h (baseclass_offset): Add `embedded_offset' and `val'
parameters. No longer returns -1 on error.
(struct cp_abi_ops) <baseclass_offset>: Add `embedded_offset' and
`val' parameters.
* cp-valprint.c: Include exceptions.h.
(cp_print_value): Handle NOT_AVAILABLE_ERROR errors when fetching
the baseclass_offset. Handle unavailable base classes. Use
val_print_invalid_address.
* p-valprint.c: Include exceptions.h.
(pascal_object_print_value): Handle NOT_AVAILABLE_ERROR errors
when fetching the baseclass_offset. No longer expect
baseclass_offset returning -1. Handle unavailable base classes.
Use val_print_invalid_address.
* valops.c (dynamic_cast_check_1): Rename `contents' parameter to
`valaddr' parameter, and change its type to gdb_byte pointer. Add
`embedded_offset' and `val' parameters. Adjust.
(dynamic_cast_check_2): Rename `contents' parameter to `valaddr'
parameter, and change its type to gdb_byte pointer. Add
`embedded_offset' and `val' parameters. Adjust. No longer expect
baseclass_offset returning -1.
(value_dynamic_cast): Use value_contents_for_printing rather than
value_contents. Adjust.
(search_struct_field): No longer expect baseclass_offset returning
-1.
(search_struct_method): If reading memory from the target is
necessary, wrap it in a new value to pass to baseclass_offset. No
longer expect baseclass_offset returning -1.
(find_method_list): No longer expect baseclass_offset returning
-1. Use value_contents_for_printing rather than value_contents.
* valprint.c (val_print_invalid_address): New function.
* valprint.h (val_print_invalid_address): Declare.
* gdbtypes.c (is_unique_ancestor_worker): New `embedded_offset'
and `val' parameters. No longer expect baseclass_offset returning
-1. Adjust.
* gnu-v2-abi.c: Include "exceptions.h".
(gnuv2_baseclass_offset): Add `embedded_offset' and `val'
parameters. Handle unavailable memory. Recurse through
gnuv2_baseclass_offset directly, rather than through
baseclass_offset. No longer returns -1 on not found, instead
throw an error.
* gnu-v3-abi.c (gnuv3_baseclass_offset): Add `embedded_offset' and
`val' parameters. Adjust.
gdb/testsuite/
* gdb.trace/unavailable.cc (class Base, class Middle, class
Derived): New types.
(derived_unavail, derived_partial, derived_whole): New globals.
(virtual_partial): New global.
(virtualp): Point at virtual_partial.
* gdb.trace/unavailable.exp (gdb_collect_globals_test): Add tests
related to unavailable vptr.
gdb/
* value.h (value_bytes_available): Declare.
(mark_value_bytes_unavailable): Declare.
* value.c (struct range): New struct.
(range_s): New typedef.
(ranges_overlap): New function.
(range_lessthan): New function.
(ranges_contain_p): New function.
(struct value) <unavailable>: New field.
(value_bytes_available): New function.
(mark_value_bytes_unavailable): New function.
(require_not_optimized_out): Constify parameter.
(require_available): New function.
(value_contents_all, value_contents): Require all bytes be
available.
(value_free): Free `unavailable'.
(value_copy): Copy `unavailable'.
* valprint.h (val_print_unavailable): Declare.
* valprint.c (valprint_check_validity): Rename `offset' parameter
to `embedded_offset'. If printing a scalar, check whether the
value chunk is available.
(val_print_unavailable): New.
(val_print_scalar_formatted): Check whether the value is
available.
* python/py-prettyprint.c (apply_val_pretty_printer): Refuse
pretty-printing unavailable values.
Don't lose embedded_offset in printing routines throughout.
gdb/
* valprint.h (val_print_array_elements): Change prototype.
* valprint.c (val_print_array_elements): Add `embedded_offset'
parameter, and adjust to pass it down to val_print, while passing
`valaddr' or `address' unmodified. Take embedded_offset into
account when checking repetitions.
* c-valprint.c (c_val_print): Pass embedded_offset to
val_print_array_elements instead of adjusting `valaddr' and
`address'.
* m2-valprint.c (m2_print_array_contents, m2_val_print): Pass
embedded_offset to val_print_array_elements instead of adjusting
`valaddr'.
* p-lang.h (pascal_object_print_value_fields): Adjust prototype.
* p-valprint.c (pascal_val_print): Pass embedded_offset to
val_print_array_elements and pascal_object_print_value_fields
instead of adjusting `valaddr'.
(pascal_object_print_value_fields): Add `offset' parameter, and
adjust to use it.
(pascal_object_print_value): Add `offset' parameter, and adjust to
use it.
(pascal_object_print_static_field): Use
value_contents_for_printing/value_embedded_offset, rather than
value_contents.
* ada-valprint.c (val_print_packed_array_elements): Add `offset'
parameter, and adjust to use it. Use
value_contents_for_printing/value_embedded_offset, rather than
value_contents.
(ada_val_print): Rename `valaddr0' parameter to `valaddr'.
(ada_val_print_array): Add `offset' parameter, and adjust to use
it.
(ada_val_print_1): Rename `valaddr0' parameter to `valaddr', and
`embedded_offset' to `offset'. Don't re-adjust `valaddr'.
Instead work with offsets. Use
value_contents_for_printing/value_embedded_offset, rather than
value_contents. Change `defer_val_int' local type to CORE_ADDR,
and use value_from_pointer to extract a target pointer, rather
than value_from_longest.
(print_variant_part): Add `offset' parameter. Replace
`outer_valaddr' parameter by a new `outer_offset' parameter.
Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
(ada_value_print): Use
value_contents_for_printing/value_embedded_offset, rather than
value_contents.
(print_record): Add `offset' parameter, and adjust to pass it
down.
(print_field_values): Add `offset' parameter. Replace
`outer_valaddr' parameter by a new `outer_offset' parameter.
Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
Use value_contents_for_printing/value_embedded_offset, rather than
value_contents.
* d-valprint.c (dynamic_array_type): Use
value_contents_for_printing/value_embedded_offset, rather than
value_contents.
* jv-valprint.c (java_print_value_fields): Add `offset' parameter.
Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
(java_print_value_fields): Take `offset' into account. Don't
re-adjust `valaddr'. Instead pass down adjusted offsets.
(java_val_print): Take `embedded_offset' into account. Pass it to
java_print_value_fields.
* f-valprint.c (f77_print_array_1): Add `embedded_offset'
parameter. Don't re-adjust `valaddr' or `address'. Instead pass
down adjusted offsets.
(f77_print_array): Add `embedded_offset' parameter. Pass it down.
(f_val_print): Take `embedded_offset' into account.
gdb/testsuite/
* gdb.base/printcmds.c (some_struct): New struct and instance.
* gdb.base/printcmds.exp (test_print_repeats_embedded_array): New
procedure.
<global scope>: Call it.
This patch should fix the following regression:
(gdb) print my_table
-$1 = ()
-(gdb) PASS: gdb.ada/null_array.exp: print my_table
+$1 = (warning: unable to get bounds of array, assuming null array
+)
+(gdb) FAIL: gdb.ada/null_array.exp: print my_table
The problem was introduced by a change in val_print_array_elements
which removed a check for the case where the array's high bound
is smaller than the array's low bound (empty array).
This change restores the check and forces the len to zero in that case.
Looking at the patch that caused the regression, I suspect that we may
have other parts that might have been broken (non-zero array low bound?).
gdb/ChangeLog:
* valprint.c (val_print_array_elements): Put back handling of
empty arrays.
* dwarf2read.c (read_array_type): Read the DW_AT_byte_size from the
DIE and set the length of the type.
* gdbtypes.h (get_array_bounds): Move here from valprint.h.
* gdbtypes.c (get_array_bounds): Move here from valprint.c and
return 0 if the corresponding bounds of the type are undefined.
* valprint.h (get_array_bounds): Move declaration to gdbtypes.h.
* valprint.c (get_array_bounds): Move implementation to gdbtypes.c.
(val_print_array_elements): Use get_array_bounds to compute the number
of array elements instead of dividing the length of the array by the
length of the element types.
* valarith.c (vector_binop): Likewise.
* valops.c (value_cast): Likewise.
* c-valprint.c (c_val_print): Likewise.
* c-typeprint.c (c_type_print_varspec_suffix): Likewise.
gdb/testsuite:
* gdb.base/gnu_vector.exp: Adjust expect messages.
* valprint.c (val_print_string): Pass 'encoding' to
LA_PRINT_STRING.
gdb/testsuite
* gdb.python/py-prettyprint.exp (run_lang_tests): Test encoding
argument to lazy_string.
* gdb.python/py-prettyprint.py (pp_ls_encoding): New global.
(pp_ls.to_string): Use it.
* gdb.python/py-prettyprint.c (main): Move declarations to top.
Add "estring2" local.
* valarith.c: White space.
* valops.c: White space.
* valprint.c: White space.
* value.c: White space.
* varobj.c: White space.
* xcoffread.c: White space.
* xml-support.c: White space.
* xml-tdesc.c: White space.
The problem is printing the wrong value for dynamic local variables
when using the "info locals" command. Consider the following code:
procedure Print (I1 : Positive; I2 : Positive) is
type My_String is array (I1 .. I2) of Character;
I : My_String := (others => 'A');
S : String (1 .. I2 + 3) := (others => ' ');
begin
S (I1 .. I2) := String (I); -- BREAK
Put_Line (S);
end Print;
After the debugger stopped at BREAK, we try printing all local variables.
Here is what we get:
(gdb) info locals
i = "["00"]["00"]"
s = "["00"]["00"]["00"]["00"]["00"]["00"]["00"]["00"]"
Curiously, printing their value using the "print" command works:
(gdb) print i
$1 = "AA"
(gdb) print s
$2 = " "
We traced the problem to trying to get the contents of a variable
(call to value_contents) before "fix'ing" it. For those not familiar
with the Ada language support, "fixing" a value consists of swapping
the value's dynamic type with a static version that is appropriate
for our actual value. As a result, the dynamic type was used to
determine the value size, which is zero, and thus the value contents
was empty.
gdb/ChangeLog:
* valprint.c (common_val_print): Fix the value before extracting
its contents.
* ada-lang.c (ada_to_fixed_value): Make this function extern.
* ada-lang.h (ada_to_fixed_value): New function declaration.
* ada-valprint.c (ada_value_print): Use ada_to_fixed_value
to avoid code duplication and fix a bug in the handling of
fixed types contents.
gdb/testsuite/ChangeLog:
* gdb.ada/dyn_loc: New testcase.
smash_to_memberptr_type, lookup_array_range_type, check_stub_method):
Use type architecture instead of current_gdbarch.
* gdbtypes.h (address_space_name_to_int, address_space_int_to_name):
Add GDBARCH paramter.
* gdbtypes.c (address_space_name_to_int, address_space_int_to_name):
Add GDBARCH parameter. Use it instead of current_gdbarch.
* c-typeprint.c (c_type_print_modifier): Update call.
* parse.c (push_type_address_space): Likewise.
* findvar.c (extract_typed_address, store_typed_address): Use type
architecture instead of current_gdbarch.
* value.c (value_as_address, unpack_field_as_long): Use type architecture
instead of current_gdbarch.
* doublest.c (floatformat_from_length): Add GDBARCH argument. Use it
instead of current_gdbarch.
(floatformat_from_type): Pass type architecture.
* infcall.c (find_function_addr): Use type architecture instead
of current_gdbarch.
* valarith.c (value_bitstring_subscript, value_x_binop, value_neg,
value_bit_index): Use type architecture instead of current_gdbarch.
* valops.c (value_cast, value_slice): Likewise.
* value.h (modify_field): Add TYPE argument.
* value.c (modify_field): Add TYPE argument. Use type architecture
instead of current_gdbarch.
(set_internalvar_component): Likewise.
* eval.c (evaluate_struct_tuple): Update call.
* valops.c (value_assign): Likewise.
* ada-lang.c (modify_general_field): Likewise. Add TYPE argument.
(make_array_descriptor): Update calls.
(move_bits): Add BITS_BIG_ENDIAN_P argument. Use it instead of
current_gdbarch.
(ada_value_assign, value_assign_to_component): Update calls.
(decode_packed_array, ada_value_primitive_packed_val, ada_value_assign,
value_assign_to_component): Use type arch instead of current_gdbarch.
* printcmd.c (float_type_from_length): Remove GDBARCH argument,
use type architecture instead.
(print_scalar_formatted, printf_command): Update calls. Use type
architecture instead of current_gdbarch.
* valprint.c (val_print_type_code_int): Use type architecture
instead of current_gdbarch.
* varobj.c (value_get_print_value): Likewise.
* python/python-prettyprint.c (print_string_repr): Add GDBARCH
argument. Use it instead of current_gdbarch.
(apply_val_pretty_printer): Update call.
* ada-valprint.c (ada_val_print_1): Use type architecture instead
of current_gdbarch.
* c-valprint.c (print_function_pointer_address): Add GDBARCH argument.
Use it instead of current_gdbarch.
(c_val_print): Update calls passing type architecture.
* f-valprint.c (f_val_print): Use type architecture instead of
current_gdbarch.
* jv-valprint (java_value_print): Likewise.
* m2-valprint.c (print_function_pointer_address): Add GDBARCH argument.
Use it instead of current_gdbarch.
(print_unpacked_pointer): Update calls passing type architecture.
* scm-valprint.c (scm_scmval_print): Use type architecture instead of
current_gdbarch.
* gnu-v3-abi.c (get_class_arch): Remove.
(gnuv3_rtti_type): Use get_type_arch instead of get_class_arch. Remove
special-case check for Java classes.
(gnuv3_virtual_fn_field, gnuv3_baseclass_offset, gnuv3_print_method_ptr,
gnuv3_method_ptr_size, gnuv3_make_method_ptr, gnuv3_method_ptr_to_value):
Use get_type_arch instead of get_class_arch.
* language.h (language_dfn): Add la_get_string member.
(LA_GET_STRING): New macro.
(default_get_string): New prototype.
* language.c (default_get_string): New function.
(unknown_language_defn, auto_language_defn, local_language_defn): Use
default_get_string for la_get_string.
* c-lang.c (c_get_string): New function.
(c_language_defn, cplus_language_defn, asm_language_defn): Use
c_get_string for la_get_string.
(minimal_language_defn): Likewise
* ada-lang.c (ada_language_defn): Likewise.
* f-lang.c (f_language_defn): Use default_get_string for
la_get_string.
* jv-lang.c (java_language_defn): Likewise.
* m2-lang.c (m2_language_defn): Likewise.
* objc-lang.c (objc_language_defn): Likewise.
* p-lang.c (p_language_defn): Likewise.
* scm-lang.c (scm_language_defn): Likewise.
* typeprint.c (type_to_string): New function.
* value.h (type_to_string): New prototype.
* valprint.c (val_print_string): Factor out code for reading string
from the inferior into its own function. Put 2 spaces after period
in comments.
(read_string): New function.
* valprint.h (read_string): New prototype.
* cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
* cli/cli-setshow.c (do_setshow_command): Handle it.
* command.h (enum var_types): Add var_zuinteger.
(add_setshow_zuinteger_cmd): Declare.
* valprint.c (_initialize_valprint): Change the set input-radix
and set output-radix commands to zuinteger type.
2009-01-23 Pedro Alves <pedro@codesourcery.com>
* gdb.base/radix.exp: Add tests to ensure that that set
input-radix 0 and set output-radix 0 are really rejected.
PR gdb/7536:
* valprint.c (input_radix_1): New static global.
(set_input_radix): Use it instead of "input_radix".
(set_input_radix_1): Always leave input_radix_1 set to
input_radix.
(output_radix_1): New static global.
(set_output_radix): Use it instead of "output_radix".
(set_output_radix_1): Always leave output_radix_1 set to
output_radix.
(_initialize_valprint): Use "input_radix_1" instead of
"input_radix" with the "input-radix" command. Use
"output_radix_1" instead of "output_radix" with the "output-radix"
command.
2008-12-29 Pedro Alves <pedro@codesourcery.com>
PR gdb/7536:
* gdb.base/radix.exp: Add tests to ensure invalid input radices
and unsupported output radices are really rejected.
* valprint.c (get_array_bounds): Renames get_array_low_bound.
Return the proper bound value if the array index type is an
enumerated type. Compute the high bound if requested.
(val_print_array_elements): Handle the case when the array
element has a null size.
* ada-valprint.c (print_optional_low_bound): Add handling
for empty arrays or arrays of zero-size elements.
(ada_val_print_array): New function, extracted out from
ada_val_print_1 case TYPE_CODE_ARRAY, and enhanced to
handle empty arrays and arrays of zero-size elements.
(ada_val_print_1)[case TYPE_CODE_ARRAY]: Replace extracted-out
code by call to ada_val_print_array.
(ada_value_print): Remove handling of null array. The handling
was incomplete and is now better handled by ada_val_print_array.
print_binary_chars, print_char_chars): Add byte_order parameter and
replace gdbarch_byte_order.
(print_decimal_chars): Replace START_P, NOT_END_P and NEXT_P by their
expressions and remove them. Remove unused TWO_TO_FOURTH.
(val_print_type_code_int): Introduce gdbarch_byte_order to get at the
endianness. Update call to print_hex_chars.
* valprint.h (print_hex_chars, print_octal_chars, print_decimal_chars,
print_binary_chars, print_char_chars): Add byte_order parameter.
* printcmd.c (print_scalar_formatted): Introduce gdbarch_byte_order to
get at the endianness. Update print_*_char calls to use byte_order.
Thiago Jung Bauermann <bauerman@br.ibm.com>
* c-lang.c (c_create_fundamental_type): Create fundamental
types for DFP.
* c-typeprint.c (c_type_print_varspec_prefix): Add
TYPE_CODE_DECFLOAT to no prefix needed case.
(c_type_print_varspec_suffix): Add TYPE_CODE_DECFLOAT to no
suffix needed case.
* c-valprint.c (c_val_print): Call print_decimal_floating to
print DFP values.
* dwarf2read.c (read_base_type): Read DW_ATE_decimal_float
attribute code and return TYPE_CODE_DECFLOAT.
(dwarf_base_type): Set dwarf2_fundamental_type for DFP values.
* gdbtypes.c (gdbtypes_post_init): Initialize builtin_decfloat,
builtin_decdouble and builtin_declong.
* gdbtypes.h (enum type_code): Add TYPE_CODE_DECFLOAT as a
type code for DFP.
(FT_DECFLOAT, FT_DBL_PREC_DECFLOAT, FT_EXT_PREC_DECFLOAT): New
types, for decimal floating point.
(FT_NUM_MEMBERS): Increment, new types added.
(struct builtin_type): Add builtin_decfloat, builtin_decdouble
and builtin_declong.
* valprint.c (print_decimal_floating): New function to print DFP
values.
* value.h (print_decimal_floating): Prototype.
(printf_command): Use gdb_byte.
* symfile.c (separate_debug_file_exists): Use gdb_byte.
(load_section_callback, read_target_long_array): Likewise.
(simple_read_overlay_table, simple_read_overlay_region_table)
(simple_overlay_update_1): Correct calls to read_target_long_array.
* valprint.c (partial_memory_read): Change MYADDR to a gdb_byte *.
Also change local pointers.
(val_print_string): Use gdb_byte.