This patch adds additional comments about the conversion of addresses to
pointers and vice-versa on AVR.
Special conversion needs to be done when dealing with an address in the
flash address space, where both code and read-only data can be stored.
Code and data pointers to flash are not addressed the same way:
A code pointer is 16 bit addressed. A data pointer is 8 bit addressed,
even if the data is in flash.
2014-07-25 Pierre Langlois <pierre.langlois@embecosm.com>
* avr-tdep.c (avr_address_to_pointer): Clarify the conversion in the
comments.
(avr_pointer_to_address): Likewise.
Jan pointed out in
<https://sourceware.org/ml/gdb-patches/2014-07/msg00553.html> that
these testcases have racy results:
gdb.base/double-prompt-target-event-error.exp
gdb.base/paginate-after-ctrl-c-running.exp
gdb.base/paginate-bg-execution.exp
gdb.base/paginate-execution-startup.exp
gdb.base/paginate-inferior-exit.exp
This is easily reproducible with "read1" from:
[reproducer for races of expect incomplete reads]
http://sourceware.org/bugzilla/show_bug.cgi?id=12649
The '-notransfer -re "<return>" { exp_continue }' trick in the current
tests doesn't actually work.
The issue that led to the -notransfer trick was that
"---Type <return> to continue, or q <return> to quit---"
has two "<return>"s. If one wants gdb_test_multiple to not hit the
built-in "<return>" match that results in FAIL, one has to expect the
pagination prompt in chunks, first up to the first "<return>", then
again, up to the second. Something around these lines:
gdb_test_multiple "" $test {
-re "<return>" {
exp_continue
}
-re "to quit ---" {
pass $test
}
}
The intent was for -notransfer+exp_continue to make expect fetch more
input, and rerun the matches against the now potentially fuller
buffer, and then eventually the -re that includes the full pagination
prompt regex would match instead (because it's listed higher up, it
would match first). But, once that "<return>" -notransfer -re
matches, it keeps re-matching forever. It seems like with
exp_continue, expect immediately retries matching, instead of first
reading in more data into the buffer, if available.
Fix this like I should have done in the first place. There's actually
no good reason for gdb_test_multiple to only match "<return>". We can
make gdb_test_multiple expect the whole pagination prompt text
instead, which is store in the 'pagination_prompt' global (similar to
'gdb_prompt'). Then a gdb_test_multiple caller that doesn't want the
default match to trigger, because it wants to see one pagination
prompt, does simply:
gdb_test_multiple "" $test {
-re "$pagination_prompt$" {
pass $test
}
}
which is just like when we don't want the default $gdb_prompt match
within gdb_test_multiple to trigger, like:
gdb_test_multiple "" $test {
-re "$gdb_prompt $" {
pass $test
}
}
Tested on x86_64 Fedora 20. In addition, I've let the racy tests run
all in parallel in a loop for 30 minutes, and they never failed.
gdb/testsuite/
2014-07-25 Pedro Alves <palves@redhat.com>
* gdb.base/double-prompt-target-event-error.exp
(cancel_pagination_in_target_event): Remove '-notransfer <return>'
match.
(cancel_pagination_in_target_event): Rework double prompt
detection.
* gdb.base/paginate-after-ctrl-c-running.exp
(test_ctrlc_while_target_running_paginates): Remove '-notransfer
<return>' match.
* gdb.base/paginate-bg-execution.exp
(test_bg_execution_pagination_return)
(test_bg_execution_pagination_cancel): Remove '-notransfer
<return>' matches.
* gdb.base/paginate-execution-startup.exp
(test_fg_execution_pagination_return)
(test_fg_execution_pagination_cancel): Remove '-notransfer
<return>' matches.
* gdb.base/paginate-inferior-exit.exp
(test_paginate_inferior_exited): Remove '-notransfer <return>'
match.
* lib/gdb-utils.exp (string_to_regexp): Move here from lib/gdb.exp.
* lib/gdb.exp (pagination_prompt): Run text through
string_to_regexp.
(gdb_test_multiple): Match $pagination_prompt instead of
"<return>".
(string_to_regexp): Move to lib/gdb-utils.exp.
This constifies deprecate_cmd and the "replacement" field in struct
cmd_list_element.
2014-07-24 Tom Tromey <tromey@redhat.com>
* cli/cli-decode.c (deprecate_cmd): Make "replacement" const.
* cli/cli-decode.h (struct cmd_list_element) <replacement>: Now
const.
* command.h (deprecate_cmd): Update.
* maint.c (maintenance_do_deprecate): Add casts.
This constifies a couple of functions in stack.c.
2014-07-24 Tom Tromey <tromey@redhat.com>
* stack.c (up_silently_base, down_silently_base): Make argument
const.
This constifies the "pattern" argument to solib_add.
2014-07-24 Tom Tromey <tromey@redhat.com>
* solib.c (solib_add): Make "pattern" const.
* solib.h (solib_add): Update.
This does some more constification in remote.c.
2014-07-24 Tom Tromey <tromey@redhat.com>
* remote.c (remote_serial_open, print_packet, putpkt)
(putpkt_binary): Constify.
* remote.h (putpkt): Update.
This constifies an argument to monitor_open.
2014-07-24 Tom Tromey <tromey@redhat.com>
* monitor.c (monitor_open): Make "args" const.
* monitor.h (monitor_open): Update.
This does a bit of constification in maint.c, making
print_bfd_section_info a bit cleaner in the process.
2014-07-24 Tom Tromey <tromey@redhat.com>
* maint.c (match_bfd_flags): Make "string" const.
(print_bfd_section_info): Remove casts.
(print_objfile_section_info): Make "string" const.
This constifies an argument to inf_child_open_target.
2014-07-24 Tom Tromey <tromey@redhat.com>
* inf-child.c (inf_child_open_target): Make "arg" const.
* inf-child.h (inf_child_open_target): Update.
This constifies an argument to unset_in_environ.
2014-07-24 Tom Tromey <tromey@redhat.com>
* environ.c (unset_in_environ): Make "var" const.
* environ.h (unset_in_environ): Update.
This does some minor constification in cli-dump.c.
2014-07-24 Tom Tromey <tromey@redhat.com>
* cli/cli-dump.c (scan_expression_with_cleanup): Return const.
Make "cmd" const.
(scan_filename_with_cleanup): Likewise.
(dump_memory_to_file, dump_value_to_file, restore_binary_file):
Make arguments const.
(restore_command): Update.
The TUI currently crashes when the user types <return> in response to
a pagination prompt:
$ gdb --tui ...
*the TUI is now active*
(gdb) set height 2
(gdb) help
List of classes of commands:
Program received signal SIGSEGV, Segmentation fault.
strlen () at ../sysdeps/x86_64/strlen.S:106
106 movdqu (%rax), %xmm12
(top-gdb) bt
#0 strlen () at ../sysdeps/x86_64/strlen.S:106
#1 0x000000000086be5f in xstrdup (s=0x0) at ../src/libiberty/xstrdup.c:33
#2 0x00000000005163f9 in tui_prep_terminal (notused1=1) at ../src/gdb/tui/tui-io.c:296
#3 0x000000000077a7ee in _rl_callback_newline () at ../src/readline/callback.c:82
#4 0x000000000077a853 in rl_callback_handler_install (prompt=0x0, linefunc=0x618b60 <command_line_handler>) at ../src/readline/callback.c:102
#5 0x0000000000718a5c in gdb_readline_wrapper_cleanup (arg=0xfd14d0) at ../src/gdb/top.c:788
#6 0x0000000000596d08 in do_my_cleanups (pmy_chain=0xcf0b38 <cleanup_chain>, old_chain=0x1043d10) at ../src/gdb/cleanups.c:155
#7 0x0000000000596d75 in do_cleanups (old_chain=0x1043d10) at ../src/gdb/cleanups.c:177
#8 0x0000000000718bd9 in gdb_readline_wrapper (prompt=0x7fffffffcfa0 "---Type <return> to continue, or q <return> to quit---")
at ../src/gdb/top.c:835
#9 0x000000000071cf74 in prompt_for_continue () at ../src/gdb/utils.c:1894
#10 0x000000000071d434 in fputs_maybe_filtered (linebuffer=0x1043db0 "List of classes of commands:\n\n", stream=0xf72e20, filter=1)
at ../src/gdb/utils.c:2111
#11 0x000000000071da0f in vfprintf_maybe_filtered (stream=0xf72e20, format=0x89aef8 "List of classes of %scommands:\n\n", args=0x7fffffffd118, filter=1)
at ../src/gdb/utils.c:2339
#12 0x000000000071da4a in vfprintf_filtered (stream=0xf72e20, format=0x89aef8 "List of classes of %scommands:\n\n", args=0x7fffffffd118)
at ../src/gdb/utils.c:2347
#13 0x000000000071dc72 in fprintf_filtered (stream=0xf72e20, format=0x89aef8 "List of classes of %scommands:\n\n") at ../src/gdb/utils.c:2399
#14 0x00000000004f90ab in help_list (list=0xe6d100, cmdtype=0x89ad8c "", class=all_classes, stream=0xf72e20)
at ../src/gdb/cli/cli-decode.c:1038
#15 0x00000000004f8dba in help_cmd (arg=0x0, stream=0xf72e20) at ../src/gdb/cli/cli-decode.c:946
Git 0017922 added:
@@ -776,6 +777,12 @@ gdb_readline_wrapper_cleanup (void *arg)
gdb_assert (input_handler == gdb_readline_wrapper_line);
input_handler = cleanup->handler_orig;
+
+ /* Reinstall INPUT_HANDLER in readline, without displaying a
+ prompt. */
+ if (async_command_editing_p)
+ rl_callback_handler_install (NULL, input_handler);
and tui_prep_terminal simply misses handling the case of a NULL
rl_prompt.
I also checked that readline's sources do similar checks.
gdb/
2014-07-24 Pedro Alves <palves@redhat.com>
* tui/tui-io.c (tui_prep_terminal): Handle NULL rl_prompt.
This patch removes some GDBSERVER checks from nat/linux-ptrace.c.
Currently the code uses a compile-time check to decide whether some
flags should be used. This changes the code to instead let users of
the module specify an additional set of flags; and then changes gdb's
linux-nat.c to call this function. At some later date, when the back
ends are fully merged, we will be able to remove this function again.
gdb/
2014-07-24 Tom Tromey <tromey@redhat.com>
Gary Benson <gbenson@redhat.com>
* nat/linux-ptrace.c (additional_flags): New global.
(linux_test_for_tracesysgood, linux_test_for_tracefork): Use
additional_flags; don't check GDBSERVER.
(linux_ptrace_set_additional_flags): New function.
* nat/linux-ptrace.h (linux_ptrace_set_additional_flags):
Declare.
* linux-nat.c (_initialize_linux_nat): Call
linux_ptrace_set_additional_flags.
gdbserver defines CORE_ADDR to be signed. This seems erroneous to
me; and furthermore likely to cause problems in common/, as it is
different from gdb's definition.
gdb/gdbserver/
2014-07-24 Tom Tromey <tromey@redhat.com>
Gary Benson <gbenson@redhat.com>
* server.h (CORE_ADDR): Now unsigned.
The target debug methods are inconsistently maintained. Most to_*
methods have some kind of targetdebug awareness, but not all of them
do. The ones that do vary in the quantity and quality of output they
generate.
This patch changes most of the target debug methods to be
automatically generated. All the arguments are printed, and separate
lines are printed for entering and existing the outermost call to the
target stack.
For example now you'd see:
-> multi-thread->to_terminal_ours (...)
-> multi-thread->to_is_async_p (...)
<- multi-thread->to_is_async_p (0x1ebb580) = 1
<- multi-thread->to_terminal_ours (0x1ebb580)
-> multi-thread->to_thread_address_space (...)
<- multi-thread->to_thread_address_space (0x1ebb580, 26802) = 1
In this case you can see nested calls. The "multi-thread" on the left
hand side is the topmost target's shortname.
There are some oddities with this patch. I'm on the fence about it
all, I really just wrote it on a whim.
It's not simple to convert every possible method, since a few don't
participate in target delegation.
Printing is done by type, so I introduced some new
debug-printing-specific typedefs to handle cases where it is nicer to
do something else.
On the plus side, this lays the groundwork for making targetdebug
affect every layer of the target stack. The idea would be to wrap
each target_ops in the stack with its own debug_target, and then you
could see calls propagate down the stack and back up; I suppose with
indentation to make it prettier. (That said there are some gotchas
lurking in this idea due to target stack introspection.)
Regtested on x86-64 Fedora 20.
2014-07-24 Tom Tromey <tromey@redhat.com>
* make-target-delegates (munge_type, write_debugmethod): New
functions.
(debug_names): New global.
($TARGET_DEBUG_PRINTER): New global.
(write_function_header): Strip TARGET_DEBUG_PRINTER from the type
name.
Write debug methods. Generate init_debug_target.
* target-debug.h: New file.
* target-delegates.c: Rebuild.
* target.c: Include target-debug.h.
(debug_target): Hoist definition.
(target_kill, target_get_section_table, target_memory_map)
(target_flash_erase, target_flash_done, target_detach)
(target_disconnect, target_wait, target_resume)
(target_pass_signals, target_program_signals, target_follow_fork)
(target_mourn_inferior, target_search_memory)
(target_thread_address_space, target_close)
(target_find_new_threads, target_core_of_thread)
(target_verify_memory, target_insert_mask_watchpoint)
(target_remove_mask_watchpoint): Remove targetdebug code.
(debug_to_post_attach, debug_to_prepare_to_store)
(debug_to_files_info, debug_to_insert_breakpoint)
(debug_to_remove_breakpoint, debug_to_can_use_hw_breakpoint)
(debug_to_region_ok_for_hw_watchpoint)
(debug_to_can_accel_watchpoint_condition)
(debug_to_stopped_by_watchpoint, debug_to_stopped_data_address)
(debug_to_watchpoint_addr_within_range)
(debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint)
(debug_to_insert_watchpoint, debug_to_remove_watchpoint)
(debug_to_terminal_init, debug_to_terminal_inferior)
(debug_to_terminal_ours_for_output, debug_to_terminal_ours)
(debug_to_terminal_save_ours, debug_to_terminal_info)
(debug_to_load, debug_to_post_startup_inferior)
(debug_to_insert_fork_catchpoint)
(debug_to_remove_fork_catchpoint)
(debug_to_insert_vfork_catchpoint)
(debug_to_remove_vfork_catchpoint)
(debug_to_insert_exec_catchpoint)
(debug_to_remove_exec_catchpoint, debug_to_has_exited)
(debug_to_can_run, debug_to_thread_architecture, debug_to_stop)
(debug_to_rcmd, debug_to_pid_to_exec_file): Remove.
(setup_target_debug): Call init_debug_target.
* target.h (TARGET_DEBUG_PRINTER): New macro.
(struct target_ops) <to_resume, to_wait, to_pass_signals,
to_program_signals>: Use TARGET_DEBUG_PRINTER.
GDB and gdbserver have functions named "fatal" that are used in
completely different ways. In gdbserver "fatal" is used to handle
critical errors: it differs from "error" in that "fatal" causes
gdbserver to exit whereas "error" does not. In GDB "fatal" is used
to abort the current operation and return to the command level.
This is implemented by throwing a non-error "RETURN_QUIT" exception.
This commit removes GDB's "fatal" and "vfatal" functions entirely.
The exception-throwing function "throw_vfatal" is renamed as
"throw_vquit", and a new convenience function "throw_quit" is added.
The small number of calls to "fatal" are replaced with calls to
"throw_quit", making what is happening more obvious.
This commit also modifies GDB's "throw_error" to call "throw_verror"
rather than calling "throw_it" directly. This change means the
assignment of RETURN_ERROR as the exception type now happens in
precisely one place in GDB rather than two.
gdb/
2014-07-24 Gary Benson <gbenson@redhat.com>
* exceptions.h (throw_vfatal): Renamed to...
(throw_vquit): New declaration.
(throw_quit): Likewise.
* exceptions.c (throw_vfatal): Renamed to...
(throw_vquit): New function.
(throw_quit): Likewise.
(throw_error): Call throw_verror rather than throw_it.
* utils.h (vfatal): Removed.
(fatal): Likewise.
* utils.c (vfatal): Removed.
(fatal): Likewise.
(internal_verror): Replaced call to fatal with call to throw_quit.
(quit): Replaced calls to fatal with calls to throw_quit.
microblaze_fetch instruction in order to use cache memory accesses
requested in target_read_code.
ChangeLog:
2014-06-17 Ajit Agarwal <ajitkum@xilinx.com>
* microblaze-tdep.c (microblaze_fetch_instruction): Use of
target_read_code.
also check whether less than zero -- for 'reg' is type 'int', and sizeof
(dwarf2_to_reg_map) is less than 0x7fff.
It is quoted in gdb_assert(), so need check 'reg' whether less than zero.
And the related warning (with '-W'):
../../binutils-gdb/gdb/microblaze-tdep.c:667:3: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]
ChangeLog:
* microblaze-tdep.c (microblaze_dwarf2_reg_to_regnum): Check whether
less tha zero in conditional expression.
This patch rewrites the make-target-delegates matching code a little
bit. The result is functionally the same (the output has some small
whitespace differences), but the new code is more forgiving regarding
the formatting of target.h. In particular now there's no need to
ensure that the return type and the method name appear on the same
line.
2014-07-23 Tom Tromey <tromey@redhat.com>
* make-target-delegates ($ARGS_PART): Match trailing close paren.
($INTRO_PART): Don't match whitespace.
($METHOD_TRAILER): Move earlier. Remove trailing semicolon and
argument matching.
($METHOD): Add $METHOD_TRAILER.
(trim): Rewrite.
(scan_target_h): New sub.
Change main loop not to collect state.
* target-delegates.c: Rebuild.
This commit fixes the build on systems without sigaltstack.
gdb/
2014-07-23 Gary Benson <gbenson@redhat.com>
* cp-support.c (gdb_demangle): Fix build on systems without
sigaltstack.
I cannot reproduce any wrong case having the code removed.
I just do not find it correct to have it disabled. But at the same time I do
like much / I do not find correct the code myself. It is a bit problematic to
have struct value describing a memory content which is no longer present
there.
What happens there:
------------------------------------------------------------------------------
volatile int vv;
static __attribute__((noinline)) int
bar (int &ref) {
ref = 20;
vv++; /* break-here */
return ref;
}
int main (void) {
int var = 10;
return bar (var);
}
------------------------------------------------------------------------------
<4><c7>: Abbrev Number: 13 (DW_TAG_GNU_call_site_parameter)
<c8> DW_AT_location : 1 byte block: 55 (DW_OP_reg5 (rdi))
<ca> DW_AT_GNU_call_site_value: 2 byte block: 91 74 (DW_OP_fbreg: -12)
<cd> DW_AT_GNU_call_site_data_value: 1 byte block: 3a (DW_OP_lit10)
------------------------------------------------------------------------------
gdb -ex 'b value_addr' -ex r --args ../gdb ./1 -ex 'watch vv' -ex r -ex 'p &ref@entry'
->
6 return ref;
bar (ref=@0x7fffffffd944: 20, ref@entry=@0x7fffffffd944: 10) at 1.C:25
------------------------------------------------------------------------------
At /* break-here */ struct value variable 'ref' is TYPE_CODE_REF.
With FSF GDB HEAD:
(gdb) x/gx arg1.contents
0x6004000a4ad0: 0x00007fffffffd944
(gdb) p ((struct value *)arg1.location.computed.closure).lval
$1 = lval_memory
(gdb) p/x ((struct value *)arg1.location.computed.closure).location.address
$3 = 0x7fffffffd944
With your #if0-ed code:
(gdb) x/gx arg1.contents
0x6004000a4ad0: 0x00007fffffffd944
(gdb) p ((struct value *)arg1.location.computed.closure).lval
$8 = not_lval
(gdb) p/x ((struct value *)arg1.location.computed.closure).location.address
$9 = 0x0
I do not see how to access
((struct value *)arg1.location.computed.closure).location.address
from GDB CLI. Trying
(gdb) p &ref@entry
will invoke value_addr()'s:
if (TYPE_CODE (type) == TYPE_CODE_REF)
/* Copy the value, but change the type from (T&) to (T*). We
keep the same location information, which is efficient, and
allows &(&X) to get the location containing the reference. */
and therefore the address gets fetched already from
arg1.contents
and not from
((struct value *)arg1.location.computed.closure).location.address
.
And for any other type than TYPE_CODE_REF this code you removed does not get
executed at all. This DW_AT_GNU_call_site_data_value DWARF was meant
primarily for Fortran but with -O0 entry values do not get produced
and with -Og and higher Fortran always optimizes out the passing by reference.
If you do not like the removed code there I am OK with removing it as I do not
know how to make it's use reproducible for user anyway. In the worst case
- if there really is some way how to exploit it - one should just get
Attempt to take address of value not located in memory.
instead of some wrong value and it may be easy to fix then.
gdb/
2014-07-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2loc.c (value_of_dwarf_reg_entry): Remove setting value address
for reference entry value target data value.
Message-ID: <20140720150727.GA18488@host2.jankratochvil.net>
The tests at
<https://sourceware.org/ml/gdb-patches/2014-07/msg00277.html> show
that comparing a fully optimized out value's contents with a value
that has not been optimized out, or is partially optimized out crashes
GDB:
(gdb) bt
#0 __memcmp_sse4_1 () at ../sysdeps/x86_64/multiarch/memcmp-sse4.S:816
#1 0x00000000005a1914 in memcmp_with_bit_offsets (ptr1=0x202b2f0 "\n", offset1_bits=0, ptr2=0x0, offset2_bits=0, length_bits=32)
at /home/pedro/gdb/mygit/build/../src/gdb/value.c:678
#2 0x00000000005a1a05 in value_available_contents_bits_eq (val1=0x2361ad0, offset1=0, val2=0x23683b0, offset2=0, length=32)
at /home/pedro/gdb/mygit/build/../src/gdb/value.c:717
#3 0x00000000005a1c09 in value_available_contents_eq (val1=0x2361ad0, offset1=0, val2=0x23683b0, offset2=0, length=4)
at /home/pedro/gdb/mygit/build/../src/gdb/value.c:769
#4 0x00000000006033ed in read_frame_arg (sym=0x1b78d20, frame=0x19bca50, argp=0x7fff4aba82b0, entryargp=0x7fff4aba82d0)
at /home/pedro/gdb/mygit/build/../src/gdb/stack.c:416
#5 0x0000000000603abb in print_frame_args (func=0x1b78cb0, frame=0x19bca50, num=-1, stream=0x1aea450) at /home/pedro/gdb/mygit/build/../src/gdb/stack.c:671
#6 0x0000000000604ae8 in print_frame (frame=0x19bca50, print_level=0, print_what=SRC_AND_LOC, print_args=1, sal=...)
at /home/pedro/gdb/mygit/build/../src/gdb/stack.c:1205
#7 0x0000000000604050 in print_frame_info (frame=0x19bca50, print_level=0, print_what=SRC_AND_LOC, print_args=1, set_current_sal=1)
at /home/pedro/gdb/mygit/build/../src/gdb/stack.c:857
#8 0x00000000006029b3 in print_stack_frame (frame=0x19bca50, print_level=0, print_what=SRC_AND_LOC, set_current_sal=1)
at /home/pedro/gdb/mygit/build/../src/gdb/stack.c:169
#9 0x00000000005fc4b8 in print_stop_event (ws=0x7fff4aba8790) at /home/pedro/gdb/mygit/build/../src/gdb/infrun.c:6068
#10 0x00000000005fc830 in normal_stop () at /home/pedro/gdb/mygit/build/../src/gdb/infrun.c:6214
The 'ptr2=0x0' in frame #1 is val2->contents, and since git 4f14910f:
gdb/ChangeLog
2013-11-26 Andrew Burgess <aburgess@broadcom.com>
* value.c (allocate_optimized_out_value): Mark value as non-lazy.
... a fully optimized-out value can have it's value contents buffer
NULL.
As a spotgap fix, revert 4f14910f, with a comment. A full fix would
be too invasive for 7.8.
gdb/
2014-07-22 Pedro Alves <palves@redhat.com>
* value.c (allocate_optimized_out_value): Don't mark value as
non-lazy.
2014-07-21 Sriraman Tallam <tmsriram@google.com>
* object.cc (Relobj::is_section_name_included): Add
".rodata.nptl_version" to not garbage collect this section.
TERNOP_SLICE was added for language Chill, but it is used for Ada and D later.
Since language Chill was removed from GDB, TERNOP_SLICE is only used for
Ada and D. This patch is to update its comments.
gdb:
2014-07-20 Yao Qi <yao@codesourcery.com>
* std-operator.def: Update comments to TERNOP_SLICE.
BINOP_RANGE was added by the following commit for chill language.
commit badefd2800
Author: Per Bothner <per@bothner.com>
Date: Wed Nov 29 22:59:31 1995 +0000
* expression.h (enum exp_opcode): Add BINOP_RANGE.
* expprint.c (dump_expression): Support BINOP_RANGE.
* eval.c (evaluate_subexp_standard): Handle BINOP_RANGE (as error).
(case MULTI_SUBSCRIPT): Fix broken f77 value->int ad hoc conversion.
* ch-lang.c (chill_op_print_tab): Support BINOP_RANGE.
(evaluate_subexp_chill): Error on BINOP_COMMA.
Chill language is no longer supported, so we can remove BINOP_RANGE too.
This patch is to remove BINOP_RANGE.
gdb:
2014-07-20 Yao Qi <yao@codesourcery.com>
* std-operator.def: Remove BINOP_RANGE.
* breakpoint.c (watchpoint_exp_is_const): Update.
* expprint.c (dump_subexp_body_standard): Likewise.
* eval.c (init_array_element): Remove dead code.
(evaluate_subexp_standard): Likewise.
Chill language support was removed several years ago, and BINOP_IN
isn't used for Pascal. This patch is to remove BINOP_IN.
gdb:
2014-07-20 Yao Qi <yao@codesourcery.com>
* std-operator.def: Remove BINOP_IN.
* breakpoint.c (watchpoint_exp_is_const): Update.
* eval.c (evaluate_subexp_standard): Likewise.
* expprint.c (dump_subexp_body_standard): Likewise.
Even though the opcodes were defined for these instructions,
the actual instruction definitions were lacking.
cpu/
* or1korbis.cpu (l-msync, l-psync, l-csync): New instructions.
opcodes/
* or1k-desc.c, * or1k-desc.h, * or1k-opc.c, * or1k-opc.h,
* or1k-opinst.c: Regenerate.
Prior to version MicroBlaze v8.10.a,EDK 13.1, XMD's gdbserver stub returned 57
registers in response to GDB's G request. Starting with version MicroBlaze
v8.10.a, EDK 13.1, XMD added the slr and shr register, for a count of 59
registers. This patch adds these registers to the expected G response. This patch
fixes the above problem for baremetal and also supports the backward compatibility.
ChangeLog:
2014-07-02 Ajit Agarwal <ajitkum@xilinx.com>
* microblaze-tdep.c (microblaze_register_names): Add
the rshr and rslr register names.
(microblaze_gdbarch_init): Use of tdesc_has_registers.
Use of tdesc_find_feature. Use of tdesc_data_alloc.
Use of tdesc_numbered_register. Use of
microblaze_register_g_packet_guesses. Use of
tdesc_use_registers. Use of set_gdbarch_register_type.
(microblaze_register_g_packet_guesses): New.
* microblaze-tdep.h (microblaze_reg_num): Add
field MICROBLAZE_SLR_REGNUM MICROBLAZE_SHR_REGNUM
MICROBLAZE_NUM_REGS and MICROBLAZE_NUM_CORE_REGS.
(microblaze_frame_cache): Use of MICROBLAZE_NUM_REGS.
* features/microblaze-core.xml: New file.
* features/microblaze-stack-protect.xml: New file.
* features/microblaze-with-stack-protect.c: New file.
* features/microblaze-with-stack-protect.xml: New file.
* features/microblaze.xml: New file.
* features/microblaze.c: New file.
* features/Makefile (microblaze-with-stack-protect): Add
microblaze-with-stack-protect microblaze and
microblaze-expedite.
* regformats/microblaze-with-stack-protect.dat: New file.
* regformats/microblaze.dat: New file.
* doc/gdb.texinfo (MicroBlaze Features): New.
Signed-off-by:Ajit Agarwal ajitkum@xilinx.com
