* expr.h (expressionS): New field X_unsigned.
* expr.c (operand): Initialize X_unsigned to 1. Set it to 0 for
unary minus case.
(expr) Fix typo resultP to right if missing operand. Set
X_unsigned to 1 when building new expression.
* read.c (potable): Make "octa" and "quad" call cons, not
big_cons.
(cons): Handle bignums. If given an O_constant (small integer) to
fill a big space, turn it into a bignum.
(parse_bitfield_cons): Set X_unsigned field.
(bignum_low, bignum_limit, bignum_high, grow_bignum, big_cons):
Removed.
* read.h (big_cons): Remove prototype.
* symbols.c (resolve_symbol_value): Don't give a warning if a
symbol in expr_section can not be resolved.
(S_SET_VALUE): Clear X_unsigned.
* write.c (write_object_file): If resolve_symbol_value failed on a
symbol we are writing out, give a warning.
* config/tc-h8500.c (parse_reglist): Set X_unsigned.
* config/tc-hppa.c (md_pseudo_table): Change "octa" and "quad" to
call pa_cons, not pa_big_cons.
(pa_big_cons): Remove.
* config/tc-hppa.h (pa_big_cons): Remove declaration.
* config/tc-i960.c (md_pseudo_table): Change "quad" to call cons,
not big_cons.
as the value of a symbol.
* struc-symbol.h (struct symbol): Removed sy_forward field. Added
sy_resolved and sy_resolving single bit fields.
* symbols.c (symbol_new): Don't initialize sy_forward field.
(resolve_symbol_value): New function to adjust symbol value by
fragment address, using recursion to resolve forward symbols.
* symbols.h: Added prototype for new function.
* read.c (pseudo_set): Set symbolP->sy_value to an undefined
expression rather than setting symbolP->sy_forward.
* write.c (write_object_file): Use resolve_symbol_value on
symbols, keeping the common case (the old behaviour) inline.
* config/obj-aout.c (obj_aout_frob_symbol): Removed sy_forward
handling (subsumed by write.c change).
* config/obj-coff.c, config/obj-coffbfd.c (obj_coff_val): Set
sy_value rather than sy_forward.
* config/obj-coffbfd.c (obj_coff_endef, yank_symbols): Check
expression segment rather than sy_forward.
(yank_symbols): Use resolve_symbol_value.
(crawl_symbols): Removed extra pass over symbols.
* config/obj-aout.c, config/obj-bout.c, config/obj-coff.c,
config/obj-vms.c (obj_crawl_symbol_chain): Removed extra pass over
symbols which handled sy_forward; use resolve_symbol_value
instead.
* config/obj-coff.h, config/obj-coffbfd.h (obj_frob_forward_symbol):
Define.
* config/obj-elf.c (obj_elf_stab_generic): Check expression
segment rather than sy_forward.
* config/obj-vms.c (VMS_Check_For_Main): Don't initialize
sy_forward; do initialize sy_resolved and sy_resolving.
* config/tc-hppa.h (STAB_FIXUP): Use sy_value, not sy_forward.
just a longword:
* struc-symbol.h: New field sy_value.
* as.h: Include expr.h before struc-symbol.h.
* expr.h: Use struct symbol rather than symbolS.
* symbols.c (S_GET_VALUE, S_SET_VALUE): Rewrote to retrieve value
of sy_value field; compile unconditionally, not just if
BFD_ASSEMBLER.
* symbols.h: Compile S_{SG}ET_VALUE prototypes unconditionally.
* write.c (write_object_file): Set BFD symbol value to gas symbol
value.
* config/obj-aout.h, config/obj-bout.h, config/obj-coff.h,
config/obj-coffbfd.h, config/obj-generic.h, config/obj-vms.h
(S_GET_VALUE, S_SET_VALUE): Removed macro definitions.
* config/obj-ieee.c (S_GET_VALUE, S_SET_VALUE): Removed.
* config/obj-coff.h, obj-coffbfd.h: Rewrote several macros to use
S_GET_VALUE rather than ost_entry.n_value.
* config/obj-aout.c (obj_symbol_to_chars), config/obj-bout.c
(obj_symbol_to_chars), config/obj-coff.c (obj_symbol_to_chars),
config/obj-coffbfd.c (symbol_to_chars): Get value to write out
using S_GET_VALUE--don't assume it is already set.
* config/obj-ieee.c (do_symbols): Set BFD symbol value to gas
symbol value.
* config/obj-vms.c (various): Don't assign directly to
S_GET_VALUE; use S_SET_VALUE instead.
Supply prototype for bfd_alloc for now.
(fixup_segment): Local add_number is now valueT. Fix some range-checking bugs.
(relax_align): Type `int' should be sufficient for the exponent.
(fix_new): Argument offset is offsetT. Locals size and newsize are valueT.
the section contents.
* config/obj-ecoff.h, config/obj-ecoff.c: Numerous changes to get
symbol table and values right.
* config/tc-mips.h (LOCAL_LABEL): If OBJ_ECOFF, any label starting
with $L is local.
* config/tc-mips.c (tc_gen_reloc): If OBJ_ECOFF, adjust the addend
by the section vma.
* config/z8k.mt (TARG_CPU_DEPENDENTS): The relevant file is
z8k-opc.h, not z8k.h.
* app.c, config/tc-*.c: Don't include read.h, since it is already
included by as.h.
* These are based on patches from Minh Tran-le
<mtranle@paris.intellicorp.com>.
* configure.in (i[34]86-ibm-aix*): Accept i486 for host. Use
obj_format coffbfd and gas_target i386coff for target.
(i[34]86-*-isc*): New host (uses sysv).
* config/i386aix.mt: Removed (no longer used).
* config/mh-i386aix (RANLIB): Use true rather than /bin/true.
(MINUS_G): Removed.
(LDFLAGS): Added, defined as -shlib.
* config/te-i386aix.h (REVERSE_SORT_RELOCS): Undefine.
* config/te-sco386.h (LOCAL_LABEL): Don't define.
(DOT_LABEL_PREFIX): Define.
* expr.c (operand): If DOT_LABEL_PREFIX, use .L0\001 as a label
name rather than L0\001.
* read.c (s_lcomm): Make a frag in SEG_BSS rather than using
local_bss_counter.
* symbols.c, symbols.h (local_bss_counter): Removed.
* write.c (write_object_file): bss no longer uses
local_bss_counter. Pass correct data and bss size to
VMS_write_object_file.
* config/obj-vms.c (VMS_write_object_file): Accept bss size as
argument, rather than using local_bss_counter.
* config/tc-m88k.c (s_bss): Don't use local_bss_counter.
* config/tc-sparc.c (s_reserve): Don't use local_bss_counter.
* config/obj-coffbfd.c (had_lineno, had_reloc): Removed.
(size_section): Restored sanity check.
(do_relocs_for): Base section address on s_paddr rather than
computing it. Adjust a29k R_IHIHALF special case to account for
section paddr (used to require paddr to be zero). If there are no
reclos, set s_relptr to 0. Set relocation size in object_headers.
(fill_section): Always set s_vaddr here, removing
ZERO_BASED_SEGMENTS case. Force s_scnptr for bss to 0. Don't set
NOLOAD for i386 .bss, because it confuses the SVR3 native linker.
Set STYP_INFO for .comment.
(coff_header_append): Use object headers and H_{SET,GET}_* macros.
Make aouthdr writing depend on OBJ_COFF_OMIT_OPTIONAL_HEADER.
(crawl_symbols): Handle 8 character section name correctly. Use
H_{SET,GET}_* macros.
(do_linenos_for): Set lineno size in object_headers.
(write_object_file): Use H_{SET,GET}_* macros. Don't bother to
set s_vaddr here. If string_byte_count remains 4, set it back to
0, and only write strings out if there are some. Call
fill_section before do_relocs_for and do_linenos_for.
(obj_coff_section): Handle optional quoted second argument giving
section characteristics.
(obj_coff_bss): Added to handle .bss.
(obj_coff_ident): Added to handle .ident (puts string in .comment
section).
(obj_coff_lcomm): Put common symbols in .bss, not .data.
(fixup_mdeps): Change to segment. Call frag_wane after
md_convert_frag.
(fixup_segment): Explicitly check S_IS_COMMON before making 386
adjustment (already happened only for common symbols, but this is
clearer).
* config/obj-coffbfd.h (OBJ_COFF_OMIT_OPTIONAL_HEADER): Define.
* config/tc-i386.c (s_bss): Don't use if I386COFF.
(md_pseudo_table): Ignore .optim and .noopt.
(tc_coff_sizemachdep): New function.
* config/tc-i386.h (REVERSE_SORT_RELOCS): Undef, for SVR3
compatibility.
(LOCAL_LABEL): Removed definition.
(DOT_LABEL_PREFIX): Defined.
Deleted some unused code.
Fixed some declarations to use PARAMS macro.
Fixed up configure.in for new targets.
Some whitespace/comment fixes.
Merged config/ChangeLog.
as data0_frchainP
* write.c (write_object_file): various changes to handle data in
the BSS segment in much the same was as stuff in the DATA segment.
* subsegs.c (subseg_change): allow and handle a change into SEG_BSS.
* expr.c(expr): allow SEG_REGISTER in expressions.
* read.c(pseudo_set): register expressions can be the source of a
set.
* subsegs.c (subseg_new): Now -R forces all changes to SEG_DATA to
goto SEG_TEXT (if a.out)
* write.c (write_object_file): If a.out don't use the old way for
-R.
* config/obj-a.out (s_sect): complain if the user tries to use a
subsegment with a value which might interfere with out -R hackery.
* config/tc-m68k.c (m68k_reg_parse): lookup names in symbol table
rather than use ugly if tree. (init_regtable): insert register
names into symbol table.
* as.c: fix typo recently introduced.
* as.h : Don't include aout/reloc.h - it's not right for COFF!
* expr.c: Much rewriting, to accomodate MRI syntax for
expressions. Also easier to read now.
* listing.c: Put back defuns
* read.c: modified to accept MRI syntax, put back listing pseudo
ops so that an assembler built with NO_LISTING ignores list ops
rather than pukes.
* write.c, write.h: fixs - only keep a reloc type in a fix if the target
machine is a SPARC or a 29K.
* config/obj-aout.c: added s_sect pseudo op
* config/obj-coffbfd.c: lints, set the filehdr flags right and
fill in the timestamp.
* config/obj-coffbfd.h: Since we don't include aout/reloc.h
anymore, define all the relocs which the tc-<x> bit will use so we
can translate from them to the coff types.
* config/tc-a29k.c: reloc_type isn't ane enum any more
* config/tc-m68k.c: Added NO_RELOC definition.
Now compiles for sparc aout, 68k aout (MRI and MIT syntax),
29k coff.
So far works as replacement for sparc and 68k /bin/as.
* read.c: Use xmalloc, not malloc.
* expr.c, input-scrub.c, write.c: Avoid "know" macros
that cover more than one line, since this causes char strings
with embedded newlines.
