The ARI script flagged the use of the __func__ variable, which
is normally not allowed (not defined in C90). However, this particular
use is OK, as the reference is only made when __STDC_VERSION__ >=
199901L. So, add an "ARI:" comment to explicitly OK this use.
gdb/ChangeLog:
* common/common-utils.h: Add "ARI:" comment beside __func__
reference.
While looking at this macro, I noticed that it wasn't always necessarily
defined. That prompted me to search the current sources to make sure
that all uses were adequately protected, which they were. But to help
prevent future uses to be made unprotected, this patch expands the
current macro documentation a bit.
gdb/ChangeLog:
* common/common-utils.h (FUNCTION_NAME): Expand the macro's
documentation a bit.
* common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New
function, contents of dirnames_to_char_ptr_vec_append moved here.
(delim_string_to_char_ptr_vec): New function.
(dirnames_to_char_ptr_vec_append): Rewrite.
* common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare.
Read branch trace data incrementally and extend the current trace rather than
discarding it and reading the entire trace buffer each time.
If the branch trace buffer overflowed, we can't extend the current trace so we
discard it and start anew by reading the entire branch trace buffer.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
Support delta reads.
(linux_disable_btrace): Change return type.
* common/linux-btrace.h (linux_read_btrace): Change parameters
and return type to allow error reporting. Update users.
(linux_disable_btrace): Change return type. Update users.
* common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
New.
(btrace_error): New.
(btrace_block) <begin>: Comment on BEGIN == 0.
* btrace.c (btrace_compute_ftrace): Start from the end of
the current trace.
(btrace_stitch_trace, btrace_clear_history): New.
(btrace_fetch): Read delta trace, return if replaying.
(btrace_clear): Move clear history code to btrace_clear_history.
(parse_xml_btrace): Throw an error if parsing failed.
* target.h (struct target_ops) <to_read_btrace>: Change parameters
and return type to allow error reporting.
(target_read_btrace): Change parameters and return type to allow
error reporting.
* target.c (target_read_btrace): Update.
* remote.c (remote_read_btrace): Support delta reads. Pass
errors on.
* NEWS: Announce it.
gdbserver/
* target.h (target_ops) <read_btrace>: Change parameters and
return type to allow error reporting.
* server.c (handle_qxfer_btrace): Support delta reads. Pass
trace reading errors on.
* linux-low.c (linux_low_read_btrace): Pass trace reading
errors on.
(linux_low_disable_btrace): New.
Try to allocate as much buffer as we can for each thread with a maximum
of 64KB.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* common/linux-btrace.c (linux_enable_btrace): Enlarge buffer.
When it takes more than one iteration to read the BTS trace, the trace from the
previous iteration is leaked. Fix it.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* common/linux-btrace.c (linux_read_btrace): Free trace from
previous iteration.
Not all systems supporting getrlimit also support RLIMIT_NOFILE
(Eg. All LynxOS systems appear to be lacking support for this).
So check its existance before using it.
gdb/ChangeLog:
* common/filestuff.c (fdwalk): Add "defined(RLIMIT_NOFILE)"
preprocessor check.
The MPX patch has broken the I386_XSTATE_SIZE macro. For AVX machines,
it ends up returning I386_XSTATE_SSE_SIZE. Where it first reads
I386_XSTATE_AVX_SIZE, it should have read I386_XSTATE_AVX:
#define I386_XSTATE_SIZE(XCR0) \
(((XCR0) & I386_XSTATE_BNDCFG) != 0 ? I386_XSTATE_BNDCFG_SIZE \
: (((XCR0) & I386_XSTATE_BNDREGS) != 0 ? I386_XSTATE_BNDCFG_SIZE \
- : (((XCR0) & I386_XSTATE_AVX_SIZE) != 0 ? I386_XSTATE_AVX_SIZE \
+ : (((XCR0) & I386_XSTATE_AVX) != 0 ? I386_XSTATE_AVX_SIZE \
: I386_XSTATE_SSE_SIZE)))
The patch goes a step further and improves readability of the macro,
by adding a couple other auxiliary macros.
2013-11-26 Walfred Tedeschi <walfred.tedeschi@intel.com>
* i386-xstate.h (I386_XSTATE_MPX): New Macro.
(I386_XSTATE_MPX_MASK): Makes use of I386_XSTATE_MPX.
(HAS_MPX): New macro.
(HAS_AVX): New macro.
(I386_XSTATE_SIZE): Uses HAS_MPX and HAS_AVX.
2013-11-20 Walfred Tedeschi <walfred.tedeschi@intel.com>
* i386-linux-nat.c (GETXSTATEREGS_SUPPLIES): Add MPX
registers on the range of registers to be read from
xsave buffer.
(i386_linux_read_description): Add case for MPX.
* i386-linux-tdep.c: Include features/i386/i386-mpx-linux.c.
(i386_linux_gregset_reg_offset): Add MPX registers.
(i386_linux_core_read_description): Initialize also MPX.
(_initialize_i386_linux_tdep): Add mpx initialization.
* i386-tdep.h (gdbarch_tdep): Add fields bnd0r_regnum, bnd0_regnum,
mpx_register_names.
(i386_regnum): Add MPX registers.
(I386_MPX_NUM_REGS): New macro.
(i386_bnd_regnum_p): New function.
* i386-linux-tdep.h (I386_LINUX_NUM_REGS): Set
number of registers to be the number of BNDSTATUS.
(tdesc_i386_mpx_linux): Add description for MPX Linux registers.
* i386-tdep.c: Include features/i386/i386-mpx.c.
(i386_mpx_names): Add MPX register names array.
(i386_bnd_names): Add bnd pseudo register names array.
(i386_bndr_regnum_p): Lookup register numbers for bnd raw
registers.
(i386_bndr_regnum_p): Lookup register numbers for bnd raw registers.
(386_mpx_ctrl_regnum_p): Lookup register numbers for MPX control
registers.
(i386_bnd_type): New function.
(i386_pseudo_register_type): Use i386_bnd_type for bnd pseudo
register types.
(i386_pseudo_register_read_into_value): Add bnd case.
(i386_pseudo_register_write): Add bnd pseudo registers.
(i386_register_reggroup_p): Add MPX register to the group all.
(i386_validate_tdesc_p): Add MPX to the target description
validation.
(i386_pseudo_register_name): Add bnd pseudo registers.
(i386_gdbarch_init): Add MPX for architecture initialization.
(_initia_initialize_i386_tdep): Add mpx initialization.
* i387-tdep.c (xsave_mpx_offset): New vector for MPX offsets on
XSAVE buffer.
(XSAVE_MPX_ADDR): New macro.
(i387_supply_xsave): Add MPX case.
(i387_collect_xsave): Add MPX case.
* i387-tdep.h (I387_BND0R_REGNUM): New macro.
(I387_BNDCFGU_REGNUM): New macro.
(I387_NUM_MPX_REGS): New macro.
(I387_NUM_BND_REGS): New macro.
(I387_NUM_MPX_CTRL_REGS): New macro.
(I387_MPXEND_REGNUM): New macro.
* common/i386-xstate.h (I386_XSTATE_BNDREGS): New macro.
(I386_XSTATE_BNDCFG): Likewise.
(I386_XSTATE_MPX_MASK): Likewise.
(I386_XSTATE_ALL_MASK): New macro represents flags for all states.
(I386_XSTATE_BNDREGS_SIZE): New macro.
(I386_XSTATE_BNDCFG_SIZE): Likewise.
(I386_XSTATE_SIZE): Adapt for MPX.
(I386_XSTATE_MAX_SIZE): Likewise.
Change-Id: I9ddb7d49434d86fa18eb6b99515203d7c567aefd
Signed-off-by: Walfred Tedeschi <walfred.tedeschi@intel.com>
Conflicts:
gdb/ChangeLog
This patch is purely mechanical. It removes gdb_stat.h and changes
the code to use sys/stat.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_stat.h: Remove.
* ada-lang.c: Use sys/stat.h, not gdb_stat.h.
* common/filestuff.c: Use sys/stat.h, not gdb_stat.h.
* common/linux-osdata.c: Use sys/stat.h, not gdb_stat.h.
* corefile.c: Use sys/stat.h, not gdb_stat.h.
* ctf.c: Use sys/stat.h, not gdb_stat.h.
* darwin-nat.c: Use sys/stat.h, not gdb_stat.h.
* dbxread.c: Use sys/stat.h, not gdb_stat.h.
* dwarf2read.c: Use sys/stat.h, not gdb_stat.h.
* exec.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/linux-low.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/remote-utils.c: Use sys/stat.h, not gdb_stat.h.
* inf-child.c: Use sys/stat.h, not gdb_stat.h.
* jit.c: Use sys/stat.h, not gdb_stat.h.
* linux-nat.c: Use sys/stat.h, not gdb_stat.h.
* m68klinux-nat.c: Use sys/stat.h, not gdb_stat.h.
* main.c: Use sys/stat.h, not gdb_stat.h.
* mdebugread.c: Use sys/stat.h, not gdb_stat.h.
* mi/mi-cmd-env.c: Use sys/stat.h, not gdb_stat.h.
* nto-tdep.c: Use sys/stat.h, not gdb_stat.h.
* objfiles.c: Use sys/stat.h, not gdb_stat.h.
* procfs.c: Use sys/stat.h, not gdb_stat.h.
* remote-fileio.c: Use sys/stat.h, not gdb_stat.h.
* remote-mips.c: Use sys/stat.h, not gdb_stat.h.
* remote.c: Use sys/stat.h, not gdb_stat.h.
* rs6000-nat.c: Use sys/stat.h, not gdb_stat.h.
* sol-thread.c: Use sys/stat.h, not gdb_stat.h.
* solib-spu.c: Use sys/stat.h, not gdb_stat.h.
* source.c: Use sys/stat.h, not gdb_stat.h.
* symfile.c: Use sys/stat.h, not gdb_stat.h.
* symmisc.c: Use sys/stat.h, not gdb_stat.h.
* symtab.c: Use sys/stat.h, not gdb_stat.h.
* top.c: Use sys/stat.h, not gdb_stat.h.
* xcoffread.c: Use sys/stat.h, not gdb_stat.h.
This removes gdb_dirent.h and updates the code to use dirent.h
instead. It also removes the now-useless configure checks.
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/common.m4 (GDB_AC_COMMON): Don't use AC_HEADER_DIRENT.
* common/gdb_dirent.h: Remove.
* common/filestuff.c: Use dirent.h.
* common/linux-osdata.c: Use dirent.h.
(NAMELEN): Define.
* config.in: Rebuild.
* configure: Rebuild.
* configure.ac: Don't use AC_HEADER_DIRENT.
* linux-fork.c: Use dirent.h
* linux-nat.c: Use dirent.h.
* nto-procfs.c: Use dirent.h.
* procfs.c: Use dirent.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* config.in: Rebuild.
* configure: Rebuild.
* configure.ac: Don't use AC_HEADER_DIRENT.
Now that we are using the gnulib string.h module, we don't need to
check for string.h or strings.h. This removes the last few checks
from the source and from the configure scripts.
2013-11-18 Tom Tromey <tromey@redhat.com>
* configure: Rebuild.
* common/common.m4 (GDB_AC_COMMON): Don't check for string.h or
strings.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* server.h: Don't check HAVE_STRING_H.
* gdbreplay.c: Don't check HAVE_STRING_H.
* configure: Rebuild.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
It has bothered me for a while that files in common/ use macros
defined via autoconf checks, but rely on each configure.ac doing the
proper checks independently.
This patch introduces common/common.m4 which consolidates the checks
assumed by code in common.
The rule I propose is that if something is needed or used by common,
it should be checked for by common.m4. However, if the check is also
needed by gdb or gdbserver, then it should be duplicated there.
Built and regtested on x86-64 Fedora 18 (though this is hardly the
most strenuous case) and using the Fedora 18 mingw cross compilers. I
also examined the config.in diffs to ensure that symbols did not go
missing.
2013-11-08 Tom Tromey <tromey@redhat.com>
* acinclude.m4: Include common.m4.
* common/common.m4: New file.
* configure, config.in: Rebuild.
* configure.ac: Use GDB_AC_COMMON.
2013-11-08 Tom Tromey <tromey@redhat.com>
* acinclude.m4: Include common.m4, codeset.m4.
* configure, config.in: Rebuild.
* configure.ac: Use GDB_AC_COMMON.
The other day while debugging something related to random signals, I
got confused with "set debug infrun 1" output, for it said:
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x323d4e8b94
infrun: random signal 20
On GNU/Linux, 20 is SIGTSTP. For some reason, it took me a few
minutes to realize that 20 is actually a GDB signal number, not a
target signal number (duh!). In any case, I propose making GDB's
output clearer here:
One way would be to use gdb_signal_to_name, like already used
elsewhere:
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x323d4e8b94
infrun: random signal SIGCHLD (20)
but I think that might confuse someone too ("20? Why does GDB believe
SIGCHLD is 20?"). So I thought of printing the enum string instead:
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x323d4e8b94
infrun: random signal GDB_SIGNAL_CHLD (20)
Looking at a more complete infrun debug log, we had actually printed
the (POSIX) signal name name a bit before:
infrun: target_wait (-1, status) =
infrun: 9300 [Thread 0x7ffff7fcb740 (LWP 9300)],
infrun: status->kind = stopped, signal = SIGCHLD
...
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x323d4e8b94
infrun: random signal 20
So I'm now thinking that it'd be even better to make infrun output
consistently use the enum symbol string, like so:
infrun: clear_proceed_status_thread (Thread 0x7ffff7fca700 (LWP 25663))
infrun: clear_proceed_status_thread (Thread 0x7ffff7fcb740 (LWP 25659))
- infrun: proceed (addr=0xffffffffffffffff, signal=144, step=1)
+ infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT, step=1)
- infrun: resume (step=1, signal=0), trap_expected=0, current thread [Thread 0x7ffff7fcb740 (LWP 25659)] at 0x400700
+ infrun: resume (step=1, signal=GDB_SIGNAL_0), trap_expected=0, current thread [Thread 0x7ffff7fcb740 (LWP 25659)] at 0x400700
infrun: wait_for_inferior ()
infrun: target_wait (-1, status) =
infrun: 25659 [Thread 0x7ffff7fcb740 (LWP 25659)],
- infrun: status->kind = stopped, signal = SIGCHLD
+ infrun: status->kind = stopped, signal = GDB_SIGNAL_CHLD
infrun: infwait_normal_state
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x400700
- infrun: random signal 20
+ infrun: random signal (GDB_SIGNAL_CHLD)
infrun: random signal, keep going
- infrun: resume (step=1, signal=20), trap_expected=0, current thread [Thread 0x7ffff7fcb740 (LWP 25659)] at 0x400700
+ infrun: resume (step=1, signal=GDB_SIGNAL_CHLD), trap_expected=0, current thread [Thread 0x7ffff7fcb740 (LWP 25659)] at 0x400700
infrun: prepare_to_wait
infrun: target_wait (-1, status) =
infrun: 25659 [Thread 0x7ffff7fcb740 (LWP 25659)],
- infrun: status->kind = stopped, signal = SIGTRAP
+ infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: infwait_normal_state
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x400704
infrun: stepi/nexti
infrun: stop_stepping
GDB's signal numbers are public and hardcoded (see
include/gdb/signals.h), so there's really no need to clutter the
output with numeric values in some places while others not. Replacing
the magic "144" with GDB_SIGNAL_DEFAULT in "proceed"'s debug output
(see above) I think is quite nice.
I posit that all this makes it clearer to newcomers that GDB has its
own signal numbering (and that there must be some mapping going on).
Tested on x86_64 Fedora 17.
gdb/
2013-10-23 Pedro Alves <palves@redhat.com>
* common/gdb_signals.h (gdb_signal_to_symbol_string): Declare.
* common/signals.c: Include "gdb_assert.h".
(signals): New field 'symbol'.
(SET): Use the 'symbol' parameter.
(gdb_signal_to_symbol_string): New function.
* infrun.c (handle_inferior_event) <random signal>: In debug
output, print the random signal enum as string in addition to its
number.
* target/waitstatus.c (target_waitstatus_to_string): Print the
signal's enum value as string instead of the (POSIX) signal name.
In the first hunk, the format string was off-by-one for cmd, and cmd
itself was larger than the maximum size required. cmd was reduced in
size and the format string adjusted.
In the second hunk, the format string was off-by-one for local_address,
remote_address and extra, although the buffers for the two addresses
were large enough for this not to matter. The specifiers for the two
addresses was corrected, and a number of unused variables including
extra were suppressed from parsing.
In the third hunk, the format string was off-by-one for name,
dependencies and status. This code was rewritten using strtok since
dependencies can be arbitrarily long.
gdb/
2013-10-23 Gary Benson <gbenson@redhat.com>
PR 16013
* common/linux-osdata.c (command_from_pid): Reduced size of cmd
from 32 to 18. Adjusted fscanf format string accordingly.
(Avoids leaving cmd unterminated.)
(print_sockets): Do not parse tlen, inode, sl, timeout, txq, rxq,
trun, retn or extra. (Avoids leaving extra unterminated.) Check
that local_address and remote_address will not overflow.
(linux_xfer_osdata_modules): Parse lines using strtok to avoid
leaving dependencies unterminated. Parse size as "%u" to match
definition.
- The Mach exception/signals escaped the TARGET_ -> GDB_ prefix change
done a while ago, but there's no real reason for that. I grepped
for TARGET_EXC and fixed all found, which unsurprisingly, means
darwin-nat.c needed fixing. I think the change there is as obvious
and trivial as it can get, so I'd be quite surprised if this broke
anything there somehow.
- GDB_SIGNAL_LAST's description string was unnecessarily inconsistent
with the enum name.
Built on x86_64 Fedora 17.
gdb/
2013-10-22 Pedro Alves <palves@redhat.com>
* include/gdb/signals.def (TARGET_EXC_BAD_ACCESS): Rename to
GDB_EXC_BAD_ACCESS.
(TARGET_EXC_BAD_INSTRUCTION): Rename to GDB_EXC_BAD_INSTRUCTION.
(TARGET_EXC_ARITHMETIC): Rename to GDB_EXC_ARITHMETIC.
(TARGET_EXC_EMULATION): Rename to GDB_EXC_EMULATION.
(TARGET_EXC_SOFTWARE): Rename to GDB_EXC_SOFTWARE.
(TARGET_EXC_BREAKPOINT): Rename to GDB_EXC_BREAKPOINT.
(GDB_SIGNAL_LAST): Change description string.
* common/signals.c (gdb_signal_from_host, do_gdb_signal_to_host):
Adjust to signal renaming.
* darwin-nat.c (darwin_decode_message): Likewise.
gdb/
2013-10-09 Jan Kratochvil <jan.kratochvil@redhat.com>
* common/filestuff.c (gdb_fopen_cloexec): Remove initialization of
result variable. Rename variable fopen_e_ever_failed to
fopen_e_ever_failed_einval. Retry fopen only for errno EINVAL.
The ptid_t contructors, accessors and predicates are documented in
_three_ places, and each place uses a different wording.
E.g, the descriptions in the .c file of the new ptid_lwp_p, ptid_tid_p
weren't updated in the final revision like the descriptions in the .h
file were. Clearly, switching to a style that has a single central
description avoids such issues.
Worse, some of the existing descriptions are plain wrong, such as:
/* Attempt to find and return an existing ptid with the given PID, LWP,
and TID components. If none exists, create a new one and return
that. */
ptid_t ptid_build (int pid, long lwp, long tid);
The function does nothing that complicated. It's just a simple
constructor.
So this gets rid of all the unnecessary descriptions, leaving only the
ones near the function declarations in the header file, and
fixes/clarifies those that remain.
gdb/
2013-10-04 Pedro Alves <palves@redhat.com>
* common/ptid.c (null_ptid, minus_one_ptid, ptid_build)
(pid_to_ptid, ptid_get_pid, ptid_get_lwp, ptid_get_tid)
(ptid_equal, ptid_is_pid, ptid_lwp_p, ptid_tid_p): Replace
describing comments with references to ptid.h.
* common/ptid.h: Remove intro description of constructors,
accessors and predicates.
(struct ptid): Reformat.
(minus_one_ptid, ptid_build, pid_to_ptid, ptid_get_pid)
(ptid_get_lwp, ptid_get_tid, ptid_equal, ptid_is_pid): Change
describing comments.
If enabling PTRACE_O_TRACEFORK fails, we never test for
PTRACE_O_TRACESYSGOOD support. Before PTRACE_O_TRACESYSGOOD is checked,
we have:
/* First, set the PTRACE_O_TRACEFORK option. If this fails, we
know for sure that it is not supported. */
ret = ptrace (PTRACE_SETOPTIONS, child_pid, (PTRACE_TYPE_ARG3) 0,
(PTRACE_TYPE_ARG4) PTRACE_O_TRACEFORK);
if (ret != 0)
{
ret = ptrace (PTRACE_KILL, child_pid, (PTRACE_TYPE_ARG3) 0,
(PTRACE_TYPE_ARG4) 0);
if (ret != 0)
{
warning (_("linux_check_ptrace_features: failed to kill child"));
return;
}
ret = my_waitpid (child_pid, &status, 0);
if (ret != child_pid)
warning (_("linux_check_ptrace_features: failed "
"to wait for killed child"));
else if (!WIFSIGNALED (status))
warning (_("linux_check_ptrace_features: unexpected "
"wait status 0x%x from killed child"), status);
return; <<<<<<<<<<<<<<<<<
}
Note that early return. If PTRACE_O_TRACEFORK isn't supported, we're
not checking PTRACE_O_TRACESYSGOOD. This didn't use to be a problem
before the unification of this whole detection business in
linux-ptrace.c. Before, the sysgood detection was completely
separate:
static void
linux_test_for_tracesysgood (int original_pid)
{
int ret;
sigset_t prev_mask;
/* We don't want those ptrace calls to be interrupted. */
block_child_signals (&prev_mask);
linux_supports_tracesysgood_flag = 0;
ret = ptrace (PTRACE_SETOPTIONS, original_pid, 0, PTRACE_O_TRACESYSGOOD);
if (ret != 0)
goto out;
linux_supports_tracesysgood_flag = 1;
out:
restore_child_signals_mask (&prev_mask);
}
So we need to get back the decoupling somehow. I think it's cleaner
to split the seperate feature detections to separate functions. This
patch does that. The new functions are named for their counterparts
that existed before this code was moved to linux-ptrace.c.
Note I've used forward declarations for the new functions to make the
patch clearer, as otherwise the patch would look like I'd be adding a
bunch of new code. A reorder can be done in a follow up patch.
Tested on x86_64 Fedora 17.
gdb/
2013-10-03 Pedro Alves <palves@redhat.com>
* common/linux-ptrace.c (linux_check_ptrace_features): Factor out
the PTRACE_O_TRACESYSGOOD and PTRACE_O_TRACEFORK to separate
functions. Always test for PTRACE_O_TRACESYSGOOD even if
PTRACE_O_TRACEFORK is not supported.
(linux_test_for_tracesysgood): New function.
(linux_test_for_tracefork): New function, factored out from
linux_check_ptrace_features, and also don't kill child_pid here.
It is possible to have a build of glibc where SYS_perf_event_open is not
defined (because when the glibc was compiled, the syscall did not exist),
but have newer kernel headers installed so that linux/perf_event.h is
available. In this setup, you get a build failure:
./common/linux-btrace.c: In function 'kernel_supports_btrace':
./common/linux-btrace.c:316:23: error: 'SYS_perf_event_open' undeclared (first use in this function)
Update the ifdef check to also see if the syscall is available.
URL: https://bugs.gentoo.org/473522
Reported-by: William Throwe <wtt6@cornell.edu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
As uintptr_t is used stdint.h must be included on all architectures.
2013-08-28 Will Newton <will.newton@linaro.org>
* common/linux-ptrace.c: Include stdint.h unconditionally.
* Makefile.in (SFILES): Remove common/target-common.c and
add target/waitstatus.c.
(HFILES_NO_SRCDIR): Remove common/target-common.h and add
target/resume.h, target/wait.h and target/waitstatus.h.
(COMMON_OBS): Remove target-common.o and add
waitstatus.o.
(target-common.o): Remove.
(waitstatus.o): New target object file.
* common/target-common.c: Move contents to
target/waitstatus.c and remove.
* common/target-common.h: Move contents to other files and
remove.
(enum resume_kind: Move to target/resume.h.
(TARGET_WNOHANG): Move to target/wait.h.
(enum target_waitkind): Move to target/waitstatus.h.
(struct target_waitstatus): Likewise.
* target.h: Do not include target-common.h and
include target/resume.h, target/wait.h and
target/waitstatus.h.
* target/resume.h: New file.
* target/wait.h: New file.
* target/waitstatus.h: New file.
* target/waitstatus.c: New file.
gdb/gdbserver/
* Makefile.in (INCLUDE_CFLAGS): Include -I$(srcdir)/../.
(SFILES): Remove $(srcdir)/common/target-common.c and
add $(srcdir)/target/waitstatus.c.
(OBS): Remove target-common.o and add waitstatus.o.
(server_h): Remove $(srcdir)/../common/target-common.h and
add $(srcdir)/../target/resume.h, $(srcdir)/../target/wait.h
and $(srcdir)/../target/waitstatus.h.
(target-common.o): Remove.
(waitstatus.o): New target object file.
* target.h: Do not include target-common.h and
include target/resume.h, target/wait.h and
target/waitstatus.h.
http://sourceware.org/ml/gdb-patches/2013-08/msg00340.html
gdb/ChangeLog
* common/format.c (parse_format_string): Don't allow '#' flag for
pointer arguments in format string.
gdb/testsuite/ChangeLog
* gdb.base/printcmds.exp (test_printf): Add test for printf of
pointer with various flags.
http://sourceware.org/ml/gdb-patches/2013-07/msg00322.html
gdb/ChangeLog
* common/format.c (parse_format_string): Add checks for NULL
character before calling strchr.
gdb/testsuite/ChangeLog
* gdb.base/printcmds.exp (test_printf): Add tests for format
strings with missing format specifier.
2013-07-04 Yao Qi <yao@codesourcery.com>
Revert:
2013-06-27 Yao Qi <yao@codesourcery.com>
* common/create-version.sh: Update comments. Handle the case
that TARGET_ALIAS is empty.
gdb/gdbserver/
2013-07-04 Yao Qi <yao@codesourcery.com>
* Makefile.in (host_alias): Use @host_noncanonical@.
(target_alias): Use @target_noncanonical@.
* configure.ac: Use ACX_NONCANONICAL_TARGET and
ACX_NONCANONICAL_HOST.
* configure: Regenerated.
Revert:
2013-06-28 Mircea Gherzan <mircea.gherzan@intel.com>
* configure.ac (version_host, version_target): Set and AC_SUBST them.
* configure: Rebuild.
* Makefile.in (version_host, version_target): Get from configure.
(version.c): Use $(version_host) and $(version_target).
This reverts part of the earlier version.in change. It moves
version.in back to the gdb directory. This works around the CVS bug
we've found.
gdb
* Makefile.in (version.c): Use version.in, not
common/version.in.
* common/create-version.sh: Likewise.
* common/version.in: Move...
* version.in: ...here.
gdb/doc
* Makefile.in (version.subst): Use version.in, not
common/version.in.
* gdbint.texinfo (Versions and Branches, Releasing GDB):
Likewise.
gdb/gdbserver
* Makefile.in (version.c): Use version.in, not
common/version.in.
sim/common
* Make-common.in (version.c): Use version.in, not
common/version.in.
* create-version.sh: Likewise.
sim/ppc:
* Make-common.in (version.c): Use version.in, not
common/version.in.
2013-06-26 Pedro Alves <pedro@codesourcery.com>
Yao Qi <yao@codesourcery.com>
* ctf.c (ctf_traceframe_info): Push trace state variables
present in the trace data into the traceframe info object.
* breakpoint.c (DEF_VEC_I): Remove.
* common/filestuff.c (DEF_VEC_I): Likewise.
* dwarf2loc.c (DEF_VEC_I): Likewise.
* mi/mi-main.c (DEF_VEC_I): Likewise.
* common/gdb_vecs.h (DEF_VEC_I): Define vector for int.
* features/traceframe-info.dtd: Add tvar element and its
attributes.
* tracepoint.c (free_traceframe_info): Free vector 'tvars'.
(build_traceframe_info): Push trace state variables present in the
trace data into the traceframe info object.
(traceframe_info_start_tvar): New function.
(tvar_attributes): New.
(traceframe_info_children): Add "tvar" element.
* tracepoint.h (struct traceframe_info) <tvars>: New field.
* NEWS: Mention the change in GDB and GDBserver.
gdb/doc:
2013-06-26 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (Traceframe Info Format): Document tvar element and
its attributes.
gdb/gdbserver:
2013-06-26 Pedro Alves <pedro@codesourcery.com>
* tracepoint.c (build_traceframe_info_xml): Output trace state
variables present in the trace buffer.
This new script has one small snafoo, which prevented the $host_alias
and $target_alias from being expanded during the generation of the
version.c file. As a result, the version info yields:
This GDB was configured as "--host=$host_alias --target=$target_alias".
^^^^^^^^^^^ ^^^^^^^^^^^^^
This patch fixes this issue.
gdb/ChangeLog:
* common/create-version.sh: Fix expansion of $host_alias
and $target_alias in generation of HOST_NAME and TARGET_NAME
(resp.).
Right now there are two nightly commits to update a file in the tree
with the current date. One commit is for BFD, one is for gdb.
It seems unnecessary to me to do this twice. We can make do with a
single such commit.
This patch changes gdb in a minimal way to reuse the BFD date -- it
extracts it from bfd/version.h and changes version.in to use the
placeholder string "DATE" for those times when a date is wanted.
I propose removing the cron job that updates the version on trunk, and
then check in this patch.
For release branches, we can keep the cron job, but just tell it to
rewrite bfd/version.h. I believe this is a simple change in the
crontab -- the script will work just fine on this file.
This also moves version.in and version.h into common/, to reflect
their shared status; and updates gdbserver to use version.h besides.
* common/create-version.sh: New file.
* Makefile.in (version.c): Use bfd/version.h, common/version.in,
create-version.sh.
(HFILES_NO_SRCDIR): Use common/version.h.
* version.in: Move to ...
* common/version.in: ... here. Replace date with "DATE".
* version.h: Move to ...
* common/version.h: ... here.
gdbserver:
* Makefile.in (version.c): Use bfd/version.h, common/version.in,
create-version.sh.
(version.o): Remove.
* gdbreplay.c: Include version.h.
(version, host_name): Don't declare.
* server.h: Include version.h.
(version, host_name): Don't declare.
doc:
* Makefile.in (POD2MAN1, POD2MAN5): Use version.subst.
(GDBvn.texi): Use version.subst.
(version.subst): New target.
(mostlyclean): Remove version.subst.
We've currently got 3 files doing open coded implementations of cpuid.
Each has its own set of workarounds and varying levels of how well
they're written and are generally hardcoded to specific cpuid functions.
If you try to build the latest gdb as a PIE on an i386 system, the build
will fail because one of them lacks PIC workarounds (wrt ebx).
Specifically, we have:
common/linux-btrace.c:
two copies of cpuid asm w/specific args, one has no workarounds
while the other implicitly does to avoid memcpy
go32-nat.c:
two copies of cpuid asm w/specific args, one has workarounds to
avoid memcpy
gdb/testsuite/gdb.arch/i386-cpuid.h:
one general cpuid asm w/many workarounds copied from older gcc
Fortunately, that last header there is pretty damn good -- it handles
lots of edge cases, the code is nice & tight (uses gcc asm operands
rather than manual movs), and is already almost a general library type
header. It's also the basis of what is now the public cpuid.h that is
shipped with gcc-4.3+.
So what I've done is pull that test header out and into gdb/common/
(not sure if there's a better place), synced to the version found in
gcc-4.8.0, put a wrapper API around it, and then cut over all the
existing call points to this new header.
Since the func already has support for "is cpuid supported on this proc",
it makes it trivial to push the i386/x86_64 ifdefs down into this wrapper
API too. Now it can be safely used for all targets and gcc will elide
the unused code for us.
I've verified the gdb.arch testsuite still passes, and this code compiles
for an armv7a host as well as x86_64. The go32-nat code has been left
ifdef-ed out until someone can test & verify the new stuff works (and if
it doesn't, figure out how to make the new code work).
URL: https://bugs.gentoo.org/467806
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Building gdb with --host=i586-pc-msdosdjgpp ends up with:
i586-pc-msdosdjgpp-gcc -g -O2 -I../../src/gdb/config/djgpp -I. -I../../src/gdb -I../../src/gdb/common -I../../src/gdb/config -DLOCALEDIR="\"/usr/local/share/locale\"" -DHAVE_CONFIG_H -I../../src/gdb/../include/opcode -I../../src/gdb/../opcodes/.. -I../../src/gdb/../readline/.. -I../bfd -I../../src/gdb/../bfd -I../../src/gdb/../include -I../libdecnumber -I../../src/gdb/../libdecnumber -I./../intl -I../../src/gdb/gnulib/import -Ibuild-gnulib/import -Wall -Wdeclaration-after-statement -Wpointer-arith -Wformat-nonliteral -Wpointer-sign -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wmissing-prototypes -Wdeclaration-after-statement -Wempty-body -Werror -c -o filestuff.o -MT filestuff.o -MMD -MP -MF .deps/filestuff.Tpo ../../src/gdb/common/filestuff.c
../../src/gdb/common/filestuff.c:38:24: fatal error: sys/socket.h: No such file or directory
There are no sockets on djgpp. This #ifdef's out the bits in the file
that use sockets, depending on whether winsock or sys/socket.h is
available.
As alternative approach, given ser-tcp.c, ser-pipe.c, etc. are split
into separate files, and which to use is selected by configure.ac:
dnl Figure out which of the many generic ser-*.c files the _host_ supports.
SER_HARDWIRE="ser-base.o ser-unix.o ser-pipe.o ser-tcp.o"
case ${host} in
*go32* ) SER_HARDWIRE=ser-go32.o ;;
*djgpp* ) SER_HARDWIRE=ser-go32.o ;;
*mingw32*) SER_HARDWIRE="ser-base.o ser-tcp.o ser-mingw.o" ;;
esac
AC_SUBST(SER_HARDWIRE)
... I considered splitting filestuff.c similarly. But I quickly gave
up on the idea, as it looked like a lot more complication over this
approach, for no real gain. Plus, there are uses of these functions
outside the ser*.c framework.
gdbserver's configure.ac is already checking for sys/socket.h.
gdb/
2013-05-23 Pedro Alves <palves@redhat.com>
* common/filestuff.c [USE_WIN32API]: Define HAVE_SOCKETS.
[HAVE_SYS_SOCKET_H]: Define HAVE_SOCKETS.
(socket_mark_cloexec, gdb_socketpair_cloexec, gdb_socket_cloexec):
Only define if HAVE_SOCKETS is defined.
* configure.ac: Check for sys/socket.h.
* config.in, configure: Regenerate.
Tom Tromey <tromey@redhat.com>
* common/filestuff.c (mark_fd_no_cloexec, unmark_fd_no_cloexec):
New functions.
* common/filestuff.c (mark_fd_no_cloexec, unmark_fd_no_cloexec):
Declare.
* darwin-nat.c (darwin_pre_ptrace): Use mark_fd_no_cloexec.
(darwin_ptrace_him): Use unmark_fd_no_cloexec.
* inf-ttrace.c (do_cleanup_pfds): Use unmark_fd_no_cloexec.
(inf_ttrace_prepare): Use mark_fd_no_cloexec.
Joel Brobecker
Doug Evans
Markus Metzger
Yao Qi
Walfred Tedeschi
Tom Tromey
Pedro Alves
Gary Benson
Jan Kratochvil
Luis Machado
Mike Frysinger
Pierre Muller
Will Newton
Andrew Burgess
Joel Brobecker