around calls to create_longjmp_breakpoint. Why install the
breakpoints if we can't find the longjmp target?
* infrun.c (wait_for_inferior): Cleanup comments near call test.
* remote-mips.c: Fixed a bunch of prototypes to avoid char/int
complaint from picky compilers. Add comment to mips_expect.
Replace all instances of sr_get_debug with remote_debug.
* (mips_readchar): Don't jam init string to monitor.
mips_initialize() handles that.
* (mips_receive_header): Print better message when we get too
much garbage.
* (mips_request): Allow caller to pass in buff to allow them to
analyze the returned message.
* (mips_initialize): Re-do initialization to try sending a BREAK,
a ^C, and then a download escape sequence. Cleanup protocol
startup. Eliminate sleeps. Clear breakpoints (if using monitor
breakpoints). Re-init frame.
* (mips_detach): Close down target.
start-sanitize-gm
* (mips_resume): Pass signal down to target.
* (mips_create_inferior): Start target with TARGET_SIGNAL_PWR.
end-sanitize-gm
* (mips_wait): Handle return status with registers, or breakpoint stuff.
* (mips_kill): Add ^C handling.
* (mips_insert_breakpoint mips_remove_breakpoint): Call new
breakpoint stuff if enabled.
* (calculate_mask remote_mips_set_watchpoint
remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint):
Hardware watchpoint/breakpoint stuff.
* (common_breakpoint): Common code for new monitor breakpoint commands.
* (mips_load): Don't use `prompt'. It's a global variable.
* top.c (dont_repeat_command): New command for use in
user-defined commands to suppress auto-repeat (by hittin return key).
start-sanitize-gm
* utils.c (request_quit): Call target_kill here. Good idea.
Needs a better implementation.
end-sanitize-gm
* valops.c: Add start of auto function-call abandonment capability.
start-sanitize-gm
* c-exp.y: Add code (currently disabled) to handle GM dynamic
structures (it conflicts with @!).
* eval.c (evaluate_subexp_standard): ditto.
* expprint.c (print_subexp dump_expression): ditto.
* expression.h (enum exp_opcode): ditto.
* parse.c (length_of_subexp): ditto.
* configure, configure.in: Add mip*-*-magic* target.
* magic.c magic.h: Special routines to handle GM stuff (like
stepping through dispatcher).
end-sanitize-gm
arg, it is a value not a symbol.
gcc -Wall lint:
* eval.c: Move declaration of evaluate_subexp_with_coercion from here..
* expression.h: ..to here.
* expression.h: Include value.h.
* ch-lang.c (evaluate_subexp_chill): Add default case in switch.
* c-lang.c (c_language_defn, cplus_language_defn, asm_langauge_defn),
f-lang.c (f_language_defn), language.c (unknown_language_defn,
auto_language_defn, local_language_defn), m2-lang.c (m2_language_defn):
Set evaluate_exp to evaluate_subexp_standard.
* ch-lang.c (evaluate_subexp_chill): New function. Chill-specific
support for MULTI_SUBSCRIPT.
(chill_language_defn): Set evaluate_exp to evaluate_subexp_chill.
* eval.c (enum noside): Move from here ....
* expression.h (enum noside): ... to here.
(evaluate_subexp_standard): New prototype.
* eval.c (evaluate_subexp): Renamed to evaluate_subexp_standard.
Removed lo-longer-needed test for chill_varying_type.
(evaluate_subexp): New. Calls exp->language_defn->evaluate_exp.
OP_UNDETERMINED_ARGLIST (no backtracking, more general).
* f-valprint.c (f_val_print): Print TYPE_CODE_STRING using
LA_PRINT_STRING, and not val_print_string (which reads from inferior).
* ch-lang.c (chill_is_varying_struct), ch-lang.h: Remve function
duplicate function made redundant by chill_varying_type.
Re-write of f77 string and complex number support:
* language.h (struct language_defn): New fields string_lower_bound
and string_char_type.
* c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn),
language.c (unknown_language_defn, auto_language_defn,
local_language_defn), m2-lang.c (m2_language_defn), f-lang.c
(f_language_defn), ch-lang.c (chill_language_defn): Set new fields.
* gdbtypes.c (create_string_type): Use new string_char_type field.
* valops.c (value_string): Use new string_lower_bound field.
* defs.h (TARGET_COMPLEX_BIT, TARGET_DOUBLE_COMPLEX_BIT): Removed.
* f-lang.c (f_create_fundamental_type, _initialize_f_language),
m2-lang.c (m2_create_fundamental_type),
gdbtypes.c (_initialize_gdbtypes): Set TYPE_TARGET_TYPE of complex
types. Set their TYPE_CODEs to TYPE_CODE_COMPLEX.
* mdebugread.c (mdebug_type_complex, mdebug_type_double_complex):
Removed. Use builtin_type_complex and builtin_type_double_complex.
* gdbtypes.h (enum type_code): Removed TYPE_CODE_LITERAL_STRING
and TYPE_CODE_LITERAL_COMPLEX.
* c-typeprint.c, f-typeprint.c, f-valprint.c, eval.c: Removed uses of
TYPE_CODE_LITERAL_STRING and TYPE_CODE_LITERAL_COMPLEX.
* gdbtypes.c, gdbtypes.h (f77_create_literal_complex_type,
f77_create_literal_string_type): Removed.
* value.h (VALUE_LITERAL_DATA, VALUE_SUBSTRING_MEMADDR,
VALUE_SUBSTRING_MYADDR): Removed.
* expression.h (enum exp_opcode): Rename OP_F77_LITERAL_COMPLEX to
OP_COMPLEX.
* parse.c: Update accordingly.
* f-valprint.c (f77_print_cmplx): Removed.
(f_val_print case TYPE_CODE_COMPLEX): Re-write to use print_floating.
* f-exp.y (STRING_LITERAL): Use OP_STRING instead of OP_ARRAY.
* eval.c (evaluate_subexp): For case OP_ARRAY, don't call
f77_value_literal_string.
* valops.c, value.h (f77_value_literal_string, f77_value_substring,
f77_assign_from_literal_string, f77_assign_from_literal_complex):
Removed.
(value_assign): No longer need to handle literal types.
* valops.c (f77_value_literal_complex), value.h: Re-written and
renamed to value_literal_complex. Last arg is now a (complex) type.
* valops.c (f77_cast_into_complex): Re-written and renamed to
cast_into_complex.
* eval.c (evaluate_subexp): Update accordingly.
start_element, left_element, right_element, slice_size,
lower_element, upper_element, first_element): Removed.
(value_string_slice, value_array_slice): Replaced by ...
(slice): New non-terminal, with working slice support.
(primitive_value_lparen, rparen): New non-terminals.
(maybe_tuple_elements): New non-terminal, to allow empty tuples.
(idtokentab): Added "up".
* value.h (COERCE_VARYING_ARRAY): New macro.
* valarith.c (value_subscript): Use it.
* valops.c (value_cast): Likewise. Also, do nothing if already
correct type, and allow converting from/to range to/from scalar.
* valops.c, value.h (varying_to_slice, value_slice): New functions.
* eval.c (OP_ARRAY): Add cast for array element.
* expression.h (TERNOP_SLICE, TERNOP_SLICE_COUNT): New exp_opcodes.
* valops.c (chill_varying_type): Moved function frp, here ...
* gdbtypes.c (chill_varying_type), gdbtypes.h: ... to here.
* parse.c (length_of_subexp, prefixify_subexp): Add support
for TERNOP_SLICE, TERNOP_SLICE_COUNT.
* expprint.c (print_subexp, dump_expression): Likewise.
* eval.c (evaluate_subexp): Likewise.
* eval.c (evaluate_subexp case MULTI_SUBSCRIPT): Don't call
value_x_binop on a Chill varying string.
* eval.c (evaluate_subexp): Handle new BINOP_MOD.
* expprint.c (dump_expression): Handle new BINOP_MOD.
* language.c (binop_type_check): Handle new BINOP_MOD.
* main.c (float_handler): Re-enable float handler when hit.
* valarith.c (language.h): Include, need current_language.
* valarith.c (TRUNCATION_TOWARDS_ZERO): Define default macro
for integer divide truncates towards zero for negative results.
* valarith.c (value_x_binop): Handle BINOP_MOD if seen.
* valarith.c (value_binop): Allow arithmetic operations on
TYPE_CODE_CHAR variables. Add case to handle new BINOP_MOD.
**** start-sanitize-chill ****
* ch-exp.y (operand_4): Add useful actions for MOD and REM.
* ch-exp.y (tokentab3): Add MOD and REM.
* ch-exp.y (yylex): Set innermost_block for symbols found
in local scopes. Return LOCATION_NAME for local symbols.
* ch-lang.c (chill_op_print_tab): Fix MOD entry to use
BINOP_MOD instead of BINOP_REM. Add REM entry, using BINOP_REM.
**** end-sanitize-chill ****
* expprint.c (print_subexp): Rename BINOP_MULTI_SUBSCRIPT to
MULTI_SUBSCRIPT.
* expprint.c (dump_expression): New function for dumping
expression vectors during gdb debugging.
* expression.h (BINOP_MULTI_SUBSCRIPT): Name changed to
MULTI_SUBSCRIPT and moved out of BINOP range.
* expression.h (DUMP_EXPRESSION): New macro that calls
dump_expression if DEBUG_EXPRESSIONS is defined.
* m2-exp.y (BINOP_MULTI_SUBSCRIPT): Changed to MULTI_SUBSCRIPT.
* parse.c (length_of_subexp, prefixify_subexp): Change
BINOP_MULTI_SUBSCRIPT to MULTI_SUBSCRIPT.
* parse.c (parse_exp_1): Call DUMP_EXPRESSION before and after
prefixify'ing the expression.
* printcmd.c (print_command_1): Add comment.
**** start-sanitize-chill ****
* ch-exp.y (expression_list): Add useful actions.
* ch-exp.y (value_array_element): Add useful actions.
* ch-exp.y (array_primitive_value): Add production.
* ch-exp.y (yylex): Recognize ',' as a token.
**** end-sanitize-chill ****
Jason Molenda