RECORD_IS_USED and record_full_open look at current_target.to_stratum
to determine whether a record target is in use. This is wrong because
arch_stratum is greater than record_stratum, so if an arch_stratum
target is pushed, RECORD_IS_USED and record_full_open will miss it.
To fix this, we can use the existing find_record_target instead, which
looks up for a record stratum target across the target stack. Since
that means exporting find_record_target in record.h, RECORD_IS_USED
ends up redundant, so the patch eliminates it.
That exercise then reveals other issues:
- adjust_pc_after_break is gating record_full_... calls based on
RECORD_IS_USED. But, record_full_ calls shouldn't be made when
recording with the record-btrace target. So this adds a new
record_full_is_used predicate to be used in that spot.
- record_full_open says "Process record target already running", even
if the recording target is record-btrace ("process record" is the
original complete name of the record-full target). record_btrace_open
only says "The process is already being recorded." and does not
suggest "record stop", like record-full does. The patch factors out
and merges that error to a new record_preopen function that all record
targets call in their open routine.
Tested on x86_64 Fedora 17.
gdb/
2014-01-14 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
* infrun.c (use_displaced_stepping): Use find_record_target
instead of RECORD_IS_USED.
(adjust_pc_after_break): Use record_full_is_used instead of
RECORD_IS_USED.
* record-btrace.c (record_btrace_open): Call record_preopen
instead of checking RECORD_IS_USED.
* record-full.c (record_full_shortname)
(record_full_core_shortname): New globals.
(record_full_is_used): New function.
(find_full_open): Call record_preopen instead of checking
RECORD_IS_USED.
(init_record_full_ops): Set the target's shortname to
record_full_shortname.
(init_record_full_core_ops): Set the target's shortname to
record_full_core_shortname.
* record-full.h (record_full_is_used): Declare.
* record.c (find_record_target): Make extern.
(record_preopen): New function.
* record.h (RECORD_IS_USED): Delete macro.
(find_record_target, record_preopen): Declare functions.
This patch adds a typedef target_xfer_partial_ftype. When we change
the signature of xfer_partial functions (for example, adding a new
parameter), we don't have to modify all of their declarations.
This patch also updates the type of parameters of target_xfer_partial
from "void *" to "gdb_byte *".
gdb:
2013-12-18 Yao Qi <yao@codesourcery.com>
* target.h (target_xfer_partial_ftype): New typedef.
(target_xfer_partial): Update declaration.
* auxv.h (memory_xfer_auxv): Likewise.
* ia64-hpux-nat.c (super_xfer_partial): Likewise.
* ia64-linux-nat.c (super_xfer_partial): Likewise.
* linux-nat.c (super_xfer_partial): Likewise.
* procfs.c (procfs_xfer_partial): Likewise.
* record-full.c (record_full_beneath_to_xfer_partial):
(tmp_to_xfer_partial): Likewise.
* sparc-nat.c (inf_ptrace_xfer_partial): Likewise.
* target.c (default_xfer_partial): Likewise.
(current_xfer_partial): Likewise.
(target_xfer_partial): Change parameter type to 'gdb_byte *'.
"info threads" changes the default source for "break" and "list", to
whatever the location of the first/bottom thread in the thread list
is...
(gdb) b start
(gdb) c
...
(gdb) list
*lists "start"*
(gdb) b 23
Breakpoint 3 at 0x400614: file test.c, line 23.
(gdb) info threads
Id Target Id Frame
* 2 Thread 0x7ffff7fcb700 (LWP 1760) "test" start (arg=0x0) at test.c:23
1 Thread 0x7ffff7fcc740 (LWP 1748) "test" 0x000000323dc08e60 in pthread_join (threadid=140737353922304, thread_return=0x0) at pthread_join.c:93
(gdb) b 23
Breakpoint 4 at 0x323dc08d90: file pthread_join.c, line 23.
^^^^^^^^^^^^^^^
(gdb) list
93 lll_wait_tid (pd->tid);
94
95
96 /* Restore cancellation mode. */
97 CANCEL_RESET (oldtype);
98
99 /* Remove the handler. */
100 pthread_cleanup_pop (0);
101
102
The issue is that print_stack_frame always sets the current sal to the
frame's sal. print_frame_info (which print_stack_frame calls to do
most of the work) also sets the last displayed sal, but only if
print_what isn't LOCATION. Now the call in question, from within
thread.c:print_thread_info, does pass in LOCATION as print_what, but
print_stack_frame doesn't have the same check print_frame_info has.
We could consider adding it, but setting these globals depending on
print_what isn't very clean, IMO. What we have is two logically
distinct operations mixed in the same function(s):
#1 - print frame, in the format specified by {print_what,
print_level and print_args}.
#2 - We're displaying a frame to the user, and I want the default
sal to point here, because the program stopped here, or the user
did some context-changing command (up, down, etc.).
So I added a new parameter to print_stack_frame & friends for point
#2, and went through all calls in the tree adjusting as necessary.
Tested on x86_64 Fedora 17.
gdb/
2013-09-17 Pedro Alves <palves@redhat.com>
PR gdb/15911
* ada-tasks.c (task_command_1): Adjust call to print_stack_frame.
* bsd-kvm.c (bsd_kvm_open, bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd):
* corelow.c (core_open):
* frame.h (print_stack_frame, print_frame_info): New
'set_current_sal' parameter.
* infcmd.c (finish_command, kill_command): Adjust call to
print_stack_frame.
* inferior.c (inferior_command): Likewise.
* infrun.c (normal_stop): Likewise.
* linux-fork.c (linux_fork_context): Likewise.
* record-full.c (record_full_goto_entry, record_full_restore):
Likewise.
* remote-mips.c (common_open): Likewise.
* stack.c (print_stack_frame): New 'set_current_sal' parameter.
Use it.
(print_frame_info): New 'set_current_sal' parameter. Set the last
displayed sal depending on the new paremeter instead of looking at
print_what.
(backtrace_command_1, select_and_print_frame, frame_command)
(current_frame_command, up_command, down_command): Adjust call to
print_stack_frame.
* thread.c (print_thread_info, restore_selected_frame)
(do_captured_thread_select): Adjust call to print_stack_frame.
* tracepoint.c (tfind_1): Likewise.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames)
(mi_cmd_stack_info_frame): Likewise.
* mi/mi-interp.c (mi_on_normal_stop): Likewise.
* mi/mi-main.c (mi_cmd_exec_return, mi_cmd_trace_find): Likewise.
gdb/testsuite/
* gdb.threads/info-threads-cur-sal-2.c: New file.
* gdb.threads/info-threads-cur-sal.c: New file.
* gdb.threads/info-threads-cur-sal.exp: New file.
Bookmarks are opaque to the core code -- by design, the target is free
to use any sort of blob as bookmark identifier.
The record target chooses to use strings for bookmarks. This adds
casts following that direction, fixing -Wpointer-sign warnings.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* record-full.c (record_full_get_bookmark): Change local 'ret'
type to char * and add cast to gdb_byte *.
(record_full_goto_bookmark): Handle 'bookmark' argument as a
string.
* reverse.c (goto_bookmark_command): Add casts to gdb_byte *.
Currently, several commands take "0" or "-1" to mean "unlimited".
"show" knows when to print "unlimited":
(gdb) show height
Number of lines gdb thinks are in a page is 45.
(gdb) set height 0
(gdb) show height
Number of lines gdb thinks are in a page is unlimited.
However, the user can't herself specify "unlimited" directly:
(gdb) set height unlimited
No symbol table is loaded. Use the "file" command.
(gdb)
This patch addresses that, by adjusting the set handler for all
integer/uinteger/zuinteger_unlimited commands to accept literal
"unlimited". It also installs a completer. Presently, we complete on
symbols by default, and at
<http://sourceware.org/ml/gdb-patches/2013-03/msg00864.html> I've
shown a WIP prototype that tried to keep that half working in these
commands. In the end, it turned out to be more complicated than
justifiable, IMO. It's super rare to want to pass the value of a
variable/symbol in the program to a GDB set/show knob. That'll still
work, it's just that we won't assist with completion anymore. This
patch just sticks with the simple, and completes on "unlimited", and
nothing else. This simplification means that
"set he<tab><tab>"
is all it takes to get to:
"set height unlimited"
The patch then goes through all integer/uinteger/zuinteger_unlimited
commands in the tree, and updates both the online help and the manual
to mention that "unlimited" is accepted in addition to 0/-1. In the
cases where the command had no online help text at all, this adds it.
I've tried to make the texts read in a way that "unlimited" is
suggested before "0" or "-1" is.
Tested on x86_64 Fedora 17.
gdb/
2013-04-10 Pedro Alves <palves@redhat.com>
* cli/cli-decode.c (integer_unlimited_completer): New function.
(add_setshow_integer_cmd, add_setshow_uinteger_cmd)
(add_setshow_zuinteger_unlimited_cmd): Install the "unlimited"
completer.
* cli/cli-setshow.c: Include "cli/cli-utils.h".
(is_unlimited_literal): New function.
(do_set_command): Handle literal "unlimited" arguments.
* frame.c (_initialize_frame) <set backtrace limit>: Document
"unlimited".
* printcmd.c (_initialize_printcmd) <set print
max-symbolic-offset>: Add help text.
* record-full.c (_initialize_record_full) <set record full
insn-number-max>: Likewise.
* record.c (_initialize_record) <set record
instruction-history-size, set record function-call-history-size>:
Add help text.
* ser-tcp.c (_initialize_ser_tcp) <set tcp connect-timeout>: Add
help text.
* tracepoint.c (_initialize_tracepoint) <set trace-buffer-size>:
Likewise.
* source.c (_initialize_source) <set listsize>: Add help text.
* utils.c (initialize_utils) <set height, set width>: Likewise.
<set pagination>: Mention "set height unlimited".
* valprint.c (_initialize_valprint) <set print elements, set print
repeats>: Document "unlimited".
gdb/doc/
2013-04-10 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Process Record and Replay): Document that "set
record full insn-number-max", "set record
instruction-history-size" and "set record
function-call-history-size" accept "unlimited".
(Backtrace): Document that "set backtrace limit" accepts
"unlimited".
(List): Document that "set listsize" accepts "unlimited".
(Print Settings)" Document that "set print max-symbolic-offset",
"set print elements" and "set print repeats" accept "unlimited".
(Starting and Stopping Trace Experiments): Document that "set
trace-buffer-size" accepts "unlimited".
(Remote Configuration): Document that "set tcp connect-timeout"
accepts "unlimited".
(Command History): Document that "set history size" accepts
"unlimited".
(Screen Size): Document that "set height" and "set width" accepts
"unlimited". Adjust "set pagination"'s description to suggest
"set height unlimited" instead of "set height 0".
gdb/testsuite/
2013-04-10 Pedro Alves <palves@redhat.com>
* gdb.base/completion.exp: Test "set height", "set listsize" and
"set trace-buffer-size" completion.
* gdb.base/setshow.exp: Test "set height unlimited".
* gdb.trace/trace-buffer-size.exp: Test "set trace-buffer-size
unlimited".
The "set record full insn-number-max" command is an uinteger command.
If the variable that holds the maximum count of logged instructions is
unsigned, it's better if the variable that holds the current number of
logged instructions is also unsigned. Looking over the code, there's
no case the variable could end up negative.
Then, tests like "if (record_full_insn_max_num)" are always true,
because being a uinteger command means that "set record full
insn-number-max 0" is actually mapped to UINT_MAX internally. IOW,
the command's variable is never 0. The checks might make some sense
if 0 wasn't mapped to UINT_MAX, and 0 meant unlimited, but, that's not
how things work.
Tested on x86_64 Fedora 17.
gdb/
2013-03-26 Pedro Alves <palves@redhat.com>
* record-full.c (record_full_insn_num): Make it unsigned.
(record_full_check_insn_num, record_full_message)
(record_full_registers_change, record_full_xfer_partial): Remove
record_full_insn_max_num check (it's always != 0).
(record_full_info, record_full_restore): Use %u as format string.
(): Use %u as format string.
(set_record_full_insn_max_num): Remove record_full_insn_max_num
check (it's always != 0).
between different record targets.
gdb/
* record.h (record_disconnect): New.
(record_detach): New.
(record_mourn_inferior): New.
(record_kill): New.
* record-full.c (record_disconnect, record_detach,
record_mourn_inferior, record_kill): Move to...
* record.c: ...here.
(DEBUG): New.
(record_stop): New.
(record_unpush): New.
(cmd_record_stop): Call record_stop. Replace unpush_target
call with record_unpush call.
(record_disconnect, record_detach): Assert that the target
is of record stratum. Call record_unpush, record_stop, and
DEBUG.
(record_mourn_inferior, record_kill): Assert that the target
is of record stratum. Call record_unpush and DEBUG.
gdb/
* record-full.h, record-full.c (record_memory_query): Rename
to ...
(record_full_memory_query): ...this. Update all users.
(record_arch_list_add_reg): Rename to ...
(record_full_arch_list_add_reg): ...this. Update all users.
(record_arch_list_add_mem): Rename to ...
(record_full_arch_list_add_mem): ...this. Update all users.
(record_arch_list_add_end): Rename to ...
(record_full_arch_list_add_end): ...this. Update all users.
(record_gdb_operation_disable_set): Rename to ...
(record_full_gdb_operation_disable_set): ...this.
Update all users.