`cols' before the __GO32__-specific code. Move the closing brace
outside the #ifdef __GO32__..#endif block.
[__GO32__]: Use `rows' and `cols' to avoid compiler warnings.
* utils.c (align_up, align_down): New functions.
* defs.h (align_up, align_down): Declare.
* ppc-sysv-tdep.c (align_up, align_down): Delete functions.
* s390-tdep.c: Replace "round_up" and "round_down" with "align_up"
and "align_down".
(round_up, round_down): Delete functions.
* mips-tdep.c: Replace ROUND_UP and ROUND_DOWN with "align_up" and
"align_down".
(ROUND_DOWN, ROUND_UP): Delete macros.
(mips_dump_tdep): Do not print "ROUND_UP" or "ROUND_DOWN".
* h8300-tdep.c: Replace "round_up" and "round_down" with
"align_up" and "align_down".
(round_up, round_down): Delete macros.
* frv-tdep.c: Replace ROUND_UP and ROUND_DOWN with "align_up" and
"align_down".
(ROUND_UP, ROUND_DOWN): Delete macros.
(set_screen_size): New prototype.
(init_page_info): Simplify by fetching the screen size from
Readline. Call set_screen_size.
(set_screen_size): New function.
(set_width): Add missing whitespace in comment.
(set_width_command): Call set_screen_size.
(set_height_command): New function.
(initialize_utils): Fix formatting. Make "set height" command
call set_height_command. Remove redundant code that turns off
pagination if output isn't a terminal. Remove redundant call to
set_width_command.
* utils.c (internal_vproblem): Print the problem to a reason
buffer and then pass to query. Make the msg variable more local.
VS: ----------------------------------------------------------------------
* symtab.c (lookup_partial_symbol): Use strcmp_iw_ordered to
do the comparison, not strcmp.
* symfile.c (compare_psymbols): Ditto.
* defs.h: Declare strcmp_iw_ordered.
* utils.c (strcmp_iw_ordered): New function.
* utils.c (streq): New function.
* dwarf2read.c (new_symbol): Use SYMBOL_SET_NAMES instead of
SYMBOL_NAME and SYMBOL_INIT_DEMANGLED_NAME.
* mdebugread.c (new_symbol): Likewise.
* stabsread.c (define_symbol): Likewise.
* coffread.c (process_coff_symbol): Likewise.
* dwarfread.c (new_symbol): Likewise.
* minsyms.c (prim_record_minimal_symbol_and_info): Use
SYMBOL_SET_NAMES instead of setting SYMBOL_NAME. Set the language
here.
(install_minimal_symbols): Don't set SYMBOL_LANGUAGE or call
SYMBOL_INIT_DEMANGLED_NAME.
* objfiles.c: Include "hashtab.h".
(allocate_objfile): Call htab_set_functions_ex for the
demangled_names_hash.
(free_objfile): Call htab_delete for the demangled_names_hash.
* objfiles.h (struct htab): Add declaration.
(struct objfile): Add demangled_names_hash.
* symfile.c: Include "hashtab.h".
(reread_symbols): Call htab_delete for the demangled_names_hash.
(add_psymbol_to_list): Use SYMBOL_SET_NAMES instead of putting
SYMBOL_NAME in the bcache.
* symtab.c: Include "hashtab.h". Update comments.
(create_demangled_names_hash, symbol_set_names): New functions.
(symbol_find_demangled_name): New function, broken out from
symbol_init_demangled_names.
(symbol_init_demangled_names): Use it.
* symtab.h (SYMBOL_INIT_DEMANGLED_NAME): Add missing parentheses.
(SYMBOL_SET_NAMES): New macro.
(symbol_set_names): Add prototype.
2003-01-23 Alexander Larsson <alexl@redhat.com>
Jim Blandy <jimb@redhat.com>
Add support for executables whose debug info has been separated
out into a separate file, leaving only a link behind.
* objfiles.h (struct objfile): New fields: separate_debug_objfile
and separate_debug_objfile_backlink.
(put_objfile_before): New declaration.
* symfile.c: #include "filenames.h".
(symbol_file_add_with_addrs_or_offsets): If this objfile has its
debug info in a separate file, read that, too. Save the addrs
argument, so we can use it again to read the separated debug info;
syms_from_objfile modifies the table we pass it.
(reread_symbols): After re-reading an objfile, call
reread_separate_symbols to refresh its separate debug info
objfile, if it has one.
(reread_separate_symbols, find_separate_debug_file,
get_debug_link_info, separate_debug_file_exists): New functions.
(debug_file_directory): New global var.
(_initialize_symfile): Initialize debug_file_directory, and
provide the new `set debug-file-directory' command to let the user
change it.
* objfiles.c (free_objfile): If this objfile has its debug info in
a separate objfile, free that one too. If this is itself a
separate debug info objfile, clear our parent's backlink.
(put_objfile_before): New function.
* utils.c (gnu_debuglink_crc32): New function.
* defs.h (gnu_debuglink_crc32): New declaration.
* Makefile.in (symfile.o): Note dependency on "filenames.h".
* configure.in: Handle --with-separate-debug-dir config option.
* acinclude.m4 (AC_DEFINE_DIR): New macro.
* acconfig.h (DEBUGDIR): New macro.
* configure, aclocal.m4, config.in: Regenerated.
gdb/doc/ChangeLog:
2003-01-23 Jim Blandy <jimb@redhat.com>
* gdb.texinfo (Separate Debug Files): New section.
* exec.c (xfer_memory): Replace boolean with int.
* p-exp.y: Use 0 instead of false.
* corelow.c (gdb_check_format): Change return type to int from
boolean.
* utils.c: Don't include <curses.h> or <term.h> first.
* utils.c (gdb_realpath): Rewrite. Try, in order: realpath() with
a constant buffer; cannonicalize_file_name(); realpath() with a
pathconf() defined buffer, xstrdup().
* utils.c (string_to_core_addr): After turning string into
a number, convert to a CORE_ADDR using INTEGER_TO_ADDRESS
which will do necessary sign-extension, etc.
* utils.c (prompt_for_continue): Use gdb_readline_wrapper.
* tracepoint.c (read_actions): Use gdb_readline_wrapper.
* top.c (gdb_readline_wrapper): New function.
(command_line_input): Use it.
canonicalize_file_name Regenerated.
* config.in, configure: Regenerated.
* utils.c: (gdb_realpath) If HAVE_CANONICALIZE_FILE_NAME is
defined use canonicalize_file_name.
(warning_begin): Delete declaration.
* utils.c (vwarning): New function.
(warning): Call vwarning.
(warning_begin): Delete function.
* rs6000-nat.c (vmap_ldinfo): Use the function warning to print
the warning message.
* d10v-tdep.c (d10v_address_to_pointer) [0]: Delete call to
warning_begin.
* configure.in: Check for realpath.
* defs.h (gdb_realpath): Declare.
* symtab.h (partial_symtab): Added fullname field.
* source.c (openp): Use gdb_realpath.
(forget_cached_source_info): Clear full name of each partial
symtab.
* utils.c (gdb_realpath): New function.
* symtab.c (lookup_symtab): Removed.
(lookup_symtab_1): Renamed to lookup_symtab.
(lookup_symtab): Look for real path.
(lookup_partial_symtab): Likewise.
* top.c (command_loop): Remove tui insert_mode hacks; don't call
tuiCleanUp because this must be made with atexit by tui.
* symfile.c (symbol_file_command): Remove call to TUIDO
* stack.c (show_and_print_stack_frame_stub): Remove tui check;
not necessary when using the selected frame hooks.
(print_stack_frame_stub): Likewise.
(print_frame_info_base): Likewise.
(print_frame_info): Likewise.
(up_silently_command): Likewise.
(down_silently_command): Likewise.
(show_stack_frame): Likewise for TUIDO.
(select_frame): Likewise.
(select_and_print_frame): Likewise.
(stack_publish_stopped_with_no_frame): Remove.
(select_and_maybe_print_frame): Remove.
* main.c (captured_main): Remove tui_fileopen and tuiInit; tui
must use the initialize ui hook.
* infrun.c (normal_stop): Remove call to TUIDO; tui must use the
selected frame hooks.
* event-top.c (command_handler): Remove tui insert_mode hack.
* defs.h: Remove TUIDO; Only include tui.h.
* breakpoint.c (mention): Remove calls to TUIDO.
(delete_breakpoint): Remove tui hacks; tui must install
the breakpoint hooks.
xmrealloc): Move existing declarations to the one place and
re-order to be consistent.
(xmcalloc, xmfree): Declare.
(xmmalloc, xmrealoc): Assume ISO-C - use size_t and void* in
declaration.
* utils.c (size_t): Delete #ifdef defining size_t.
(mmalloc, mrealloc, mcalloc, mfree): Re-order.
(mmalloc, mrealloc, mcalloc): Document as only calls in GDB
corresponding malloc, realloc, calloc.
(mfree): Call free directly.
(xmmalloc, xmrealloc): Clean up. Assume ISO-C.
(xmcalloc, xmfree): New functions. Copy old xcalloc and xfree
function bodies to here.
(xcalloc, xfree): Call xmcalloc and xmfree respectfully.
floatformat_is_nan and floatformat_mantissa.
* utils.c: Include "gdb_assert.h".
(floatformat_is_negative): New function.
(floatformat_is_nan): New function.
(floatformat_mantissa): New function.
* valprint.c: Include "floatformat.h".
(print_floating): Get rid of the Linux-specific
TARGET_ANALYZE_FLOATING macro and rewrite NaN detection with the
help these new functions. Print NaN's in a format conforming to
ISO C99.
allocated buffer.
(save_inferior_pid): Restore the PID from that tempoary
buffer. Delete the buffer.
* utils.c (make_cleanup_close, do_close_cleanup): Ditto for FD.
void*.
From Philippe De Muyter <phdm@macqel.be>:
* printcmd.c (print_address_symbolic): Call `make_cleanup' with
`(free_current_contents, &x)', not `(free, x)'.
* utils.c (free_current_contents): Do not `free (NULL)'.
* printcmd.c (print_address_symbolic): Cleanup after a failed
call to build_address_symbolic.
* defs.h (struct continuation_arg): make 'data' a union, to avoid
casting problems when int and pointer are not the same size.
* event-top.c (command_handler): use data as a union.
(command_line_handler_continuation): ditto.
* infcmd.c (step_1_continuation): use data as a union. Re-indent.
(step_once): ditto. (finish_command_continuation): ditto.
(finish_command): ditto.
* breakpoint.c (until_break_command): use data as a union.
(until_break_command_continuation): ditto.
* utils.c (add_intermediate_continuation): fix typo in comment.
* utils.c: <readline/readline.h> instead of "readline/readline.h".
* configure.in (TERM_LIB): Search for the appropriate term library
on the host system.
* configure: Regenerated.
* Makefile.in (TERMCAP): Set based on autoconf check.
* config/*/*.mh: Don't override TERMCAP setting.
* monitor.c (monitor_debug): Move to utils.c, rename to puts_debug.
(monitor_write_memory, monitor_read_memory, monitor_insert_breakpoint,
monitor_remove_breakpoint): Remove useless address bits if current
monitor has MO_ADDR_BITS_REMOVE flag.
* monitor.h (MO_ADDR_BITS_REMOVE): Define.
* utils.c (puts_debug): Formerly monitor_debug from monitor.c;
move here and make public. Add better support for carriage returns.
* defs.h (puts_debug): Declare.
* dsrec.c (load_srec): Use puts_debug to print remotedebug information.
Output header record correctly.
(make_srec): Output a header record instead of a termination record
if sect is non-NULL (value is ignored), but abfd is NULL.
* config/mips/tm-tx39.h (DEFAULT_MIPS_TYPE): Remove definition.
(REGISTER_NAMES): Define to add R3900-specific registers.
* config/mips/tm-tx39l.h: Ditto.
* config/mips/tx39.mt (TDEPFILES): Add dve3900-rom.o and support files.
* config/mips/tx39l.mt: Ditto.
that directory.
* defs.h utils.c (error warning): Make message be const.
* main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr
to hook. Otherwise send it to fputs.
* monitor.c monitor.h (monitor_get_dev_name): New function. Does
the obvious.
* remote-e7000.c: Remove debugify stuff. Change printf, fprintf
to _filtered forms to make output appear in GUIs. Replace all
uses of SERIAL_READCHAR with readchar, which has better error
checking.
* (e7000_parse_device): Add prototype.
* (readchar): Improve doc. Handle random serial errors.
* (expect): Disable notice_quit code. It's busted. Remove
serial error handling (it's now handled in readchar). Remove
remote_debug echoing. That's handled in readchar as well.
* (e7000_parse_device): Remove serial_flag arg. It's not
necessary.
* (e7000_open): Split into two pieces. Second part is
e7000_start_remote, and is error protected. Now, when we connect
to the target, we setup the initial frame and registers so that
the user gets an immediate indication of where the target is.
* (gch): Remove debug output. That's handled by readchar.
* (e7000_read_inferior_memory): Handle errors better.
* (_initialize_remote_e7000): Get rid of `<xxx>' things from
command names. They show up when doing completion and confuse
things horribly.
* ser-e7kpc.c: Remove the last seven months of brain damage. Get
rid of the DLL's since we can access the device directly from Win32s
and Win95. Get rid of debugify crud.
* serial.c: Remove debugify cruft.
* (serial_logchar serial_log_command serial_write serial_readchar
serial_send_break serial_close): Merge common functionality into
serial_logchar. Clean up rest of routines.
* sparclet-rom.c: Disembowel. Leave only download routine.
Download routine now switches to remote target automatically.
* top.c (disconnect): Only define if SIGHUP is defined. Cleans
up MSVC/Win32 problem.
* utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout
or gdb_stderr.
* config/sh/tm-sh.h: Define TARGET_SH for WinGDB.
* config/sparc/tm-sparclet.h: Remove override for prompt.
config/mips/tm-mips.h: Add/fix bugs for 64-bit mips support.
* defs.h: Cleanup; add prototypess
* corefile.c: Change FIXME #ifdef
* win32-nat.c: Include windefs instead of windows.h.
* utils.c: Add routines for printing addresses and registers
based on type size.
and MMALLOC_CHECK macros, and add comment indicating how host dependent
makefile fragment should modify MMALLOC_CFLAGS to not use mmalloc, or
to use it but to not do heap corruption checking.
* gdbserver/Makefile.in: Ditto.
* utils.c (init_malloc): Replace warning() use with direct call of
fprintf_unfiltered, since current_target has not yet been set and thus
we cannot use warning(). If we try to use mmcheck and it fails,
suggest that this configuration needs NO_MMCHECK or MMCHECK_FORCE
defined. Other small mmalloc related cleanups.
* config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1.
* config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Set to -DNO_MMCHECK.
* config/sparc/xm-sun4os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/i386/xm-i386v4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/i386/xm-linux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/m68k/xm-hp300hpux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/m68k/xm-m68kv4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT);
* config/m68k/xm-sun3os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/pa/xm-hppah.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/sparc/xm-sun4sol2.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
Remove obsolete defines.
* config/alpha/alpha-linux.mh (MMALLOC_DISABLE):
* config/alpha/alpha-osf1.mh (MMALLOC_DISABLE):
* config/rs6000/rs6000.mh (MMALLOC_DISABLE):
* config/rs6000/aix4.mh (MMALLOC_DISABLE):
* config/powerpc/aix4.mh (MMALLOC_DISABLE):
* config/powerpc/aix.mh (MMALLOC_DISABLE):
* config/ns32k/ns32km3.mh (MMALLOC_DISABLE):
* config/mips/mipsm3.mh (MMALLOC_DISABLE):
* config/mips/decstation.mh (MMALLOC_DISABLE):
* config/m88k/cxux.mh (MMALLOC_DISABLE):
* config/i386/i386mk.mh (MMALLOC_DISABLE):
* config/i386/i386m3.mh (MMALLOC_DISABLE):
* config/i386/i386gnu.mh (MMALLOC_DISABLE):
Use MMALLOC_CFLAGS instead.
user can attach to a previously running program.
* (nindy_fetch_registers nindy_store_registers): Get rid of fp
conversion code. That's all handled in {extract store}_floating
now.
* utils.c (floatformat_to_double): Don't bias exponent when
handling zero's, denorms or NaNs.
* config/i960/tm-i960.h (REGISTER_CONVERT_TO_VIRTUAL
REGISTER_CONVERT_TO_RAW): Change to using DOUBLST and
FLOATFORMAT_TO/FROM_DOUBLEST macros.
* config/i960/tm-nindy960.h: Undefine
REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW, and
REGISTER_CONVERTIBLE. These are no longer necessary now that all
the magic happens in extract/store_floating.
* (dcache_peek dcache_fetch dcache_poke): Make dcache_fetch and
dcache_poke call dcache_xfer_memory directly in order to fix
problems with turning off dcache. dcache_peek is now unnecessary,
so it goes away.
* defs.h: Define new macros HOST_{FLOAT DOUBLE LONG_DOUBLE}_FORMAT
and TARGET_{FLOAT DOUBLE LONG_DOUBLE}_FORMAT to specify a pointer
to a struct floatformat. This allows for better handling of
targets whose floating point formats differ from the host by more
than just byte order.
* (floatformat_to_long_double floatformat_from_long_double):
Prototypes for new functions in utils.c.
* (floatformat_to_doublest floatformat_from_doublest): Prototypes
for pointers to floating point conversion functions. The actual
function uses either double or long double if the host supports it.
* findvar.c (floatformat_to_doublest floatformat_from_doublest):
Initialize to point at correct function depending on HAVE_LONG_DOUBLE.
* (extract_floating store_floating): Rewrite. Now, if host fp
format is the same as the target, we just do a copy. Otherwise,
we call floatformat_{to from}_doublest.
* remote-nindy.c (nindy_xfer_inferior_memory): Change param
`write' to `should_write'.
* utils.c (floatformat_to_long_double
floatformat_from_long_double): New routines that implement long
double versions of functions in libiberty/floatformat.c.
* config/i960/tm-i960.h (TARGET_LONG_DOUBLE_FORMAT): Define this for
i960 extended real (80 bit) numbers.
* nindy-share/nindy.c (ninMemGet ninMemPut): Return number of bytes
actually read or written.
* defs.h: Test on name __WIN32__ rather than WIN32.
* inflow.c (new_tty): Likewise
* terminal.h: Likewise.
* utils.c (initialize_utils): Likewise.
* win32-nat.c (child_create_inferiror): Print error code when failing.
* config/i386/win32.mh (XM_CLIBS): Need -lkernel32.
around calls to create_longjmp_breakpoint. Why install the
breakpoints if we can't find the longjmp target?
* infrun.c (wait_for_inferior): Cleanup comments near call test.
* remote-mips.c: Fixed a bunch of prototypes to avoid char/int
complaint from picky compilers. Add comment to mips_expect.
Replace all instances of sr_get_debug with remote_debug.
* (mips_readchar): Don't jam init string to monitor.
mips_initialize() handles that.
* (mips_receive_header): Print better message when we get too
much garbage.
* (mips_request): Allow caller to pass in buff to allow them to
analyze the returned message.
* (mips_initialize): Re-do initialization to try sending a BREAK,
a ^C, and then a download escape sequence. Cleanup protocol
startup. Eliminate sleeps. Clear breakpoints (if using monitor
breakpoints). Re-init frame.
* (mips_detach): Close down target.
start-sanitize-gm
* (mips_resume): Pass signal down to target.
* (mips_create_inferior): Start target with TARGET_SIGNAL_PWR.
end-sanitize-gm
* (mips_wait): Handle return status with registers, or breakpoint stuff.
* (mips_kill): Add ^C handling.
* (mips_insert_breakpoint mips_remove_breakpoint): Call new
breakpoint stuff if enabled.
* (calculate_mask remote_mips_set_watchpoint
remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint):
Hardware watchpoint/breakpoint stuff.
* (common_breakpoint): Common code for new monitor breakpoint commands.
* (mips_load): Don't use `prompt'. It's a global variable.
* top.c (dont_repeat_command): New command for use in
user-defined commands to suppress auto-repeat (by hittin return key).
start-sanitize-gm
* utils.c (request_quit): Call target_kill here. Good idea.
Needs a better implementation.
end-sanitize-gm
* valops.c: Add start of auto function-call abandonment capability.
start-sanitize-gm
* c-exp.y: Add code (currently disabled) to handle GM dynamic
structures (it conflicts with @!).
* eval.c (evaluate_subexp_standard): ditto.
* expprint.c (print_subexp dump_expression): ditto.
* expression.h (enum exp_opcode): ditto.
* parse.c (length_of_subexp): ditto.
* configure, configure.in: Add mip*-*-magic* target.
* magic.c magic.h: Special routines to handle GM stuff (like
stepping through dispatcher).
end-sanitize-gm
* callback.[ch]: New files.
* remote-rdp.c: Support for the ARM RDP monitor.
* Makefile: Update.
* arm-tdep.c (arm_othernames): New.
(_initialize_arm_tdep): install 'othernames' command.
(arm_nullified_insn, shifted_reg_val, arm_get_next_pc): New.
* configure.in: Check for termios.h, termio.h and sgtty.h.
(i[345]86-*-win32*): New host.
* configure: Regenerated.
* inflow.c: Clean up inclusions.
* main.c (main): Check for WINGDB, not WIN32.
* printcmd.c (do_examine): Put QUIT test in loop.
* remote-hms.c (e7000_load): Delete.
(hms_ops): Point to generic_load instead.
* remote-hms.c (hms_ops): Point to generic_load.
* remote-sim.c (sim_callback_write_stdout): Becomes
gdbsim_write_stdout.
(gdbsim_load): Call generic_load.
* remote-utils.c (gr_load_image): Delete.
* ser-unix.c (terminal.h): Include instead of havig
own #if tree.
(hardwire_flush_input): Reset input buffer too.
* source.c (openp): If WIN32 then open file in binary mode.
* terminal.h: Configure IO mechanism using autoconf defines if available and
not overriden.
* utils.c (quit, pollquit, notice_quit): WIN32 check becomes WINGDB check.
* config/arm/arm.mt (TDEPFILES): Add remote-rdp.o
* config/arm/tm-arm.h (TARGET_BYTE_ORDER): becomes TARGET_BYTE_ORDER_SELECTABLE.
(ADDR_BITS_REMOVE): New.
(ORIGINAL_REGISTER_NAMES, ADDITIONAL_REGISTER_NAMES): New.
(INST_xx): New
(FRAME_FIND_SAVED_REGS): Pass the right argument.
(arm_get_next_pc): Declare.
* mswin/prebuilt/*/bfdtarget.h (SELECT_ARCHITECTURES): Need leading &.
* monitor.c: Turn on caching.
(monitor_printf): If a ^C was sent, don't expect to see its
echo.
(monitor_open): Enable caching.
(monitor_resume, monitor_load): Flush cache.
(monitor_xfer_memory): Call cache routine.
(monitor_dump_regs): New.
(monitor_fetch_registers): If monitor_dump_regs available
then use it.
(monitor_load): Don't ref exec_bfd if it's NULL.
(monitor_load_srec): Use new monitor_make_srec calling convention.
(monitor_make_srec): Rewrite to cope with two, three and four byte
addresses.
* remote-hms.c (hms_cmds): Initialze end-of-command delim.
* dcache.h, dcache.h: Rewritten.
* remote.c: Reenable caching.
(getpkt): Reduce MAX_TRIES to 3.
(remote_xfer_memory): Use dcache_xfer_memory.
* defs.h (error_hook): New.
* top.c (error_hook): New definition.
* utils.c (error): Use error_hook if initialized.
* sparcl-tdep.c (HAVE_SOCKETS): Don't define if GO32 or WIN32. Use
HAVE_SOCKETS in place of #ifndef GO32.
consistency with error_begin. Also print warning_pre_print.
Document it better.
* utils.c (warning): Use it.
* utils.c (error_begin): Doc fix.
* rs6000-nat.c (vmap_ldinfo): If symfile_objfile is not part of
any vmap, nuke it.
argument be an int, not a char. Using a prototype followed by an
old-style function definition in a case where an argument is
widened is a GCC-ism not supported by the native AIX compiler.
* Add rule for annotate.o to keep Sun make happy.
* configure.in: Add config for powerpc/Netware.
* partial-stab.h (near N_SO): Don't call START_PSYMTAB with null
filename. This speeds up handling of trailing N_SO stabs (they
mark the end of a .o file).
* target.c, target.h: Change the way pushing and popping of
targets work to support target overlays and inheritance.
* corelow.c, hppa-tdep.c, inflow.c, remote-nindy.c, utils.c:
Fixup references to current_target, due to previous changes.
* config/i386/tm-i386nw.h: Enable longjmp support. More work is
needed to get the address of longjmp out of the target.
fputs_unfiltered and exit directly, rather than fatal. The latter
calls vfprintf_unfiltered!
* gdbtypes.h, gdbtypes.c (can_dereference): New function.
* value.h, printcmd.c (print_value_flags): Move from here...
* annotate.c: ...to here, and make it use can_dereference.
* inflow.c (job_control, attach_flag, generic_mourn_inferior):
Remove, needed for both native and cross.
* target.c (attach_flag, generic_mourn_inferior): Put here.
* utils.c (job_control): Put here.
(terminal.h): Don't include anymore.
BROKEN_LARGE_ALLOCA. Do the cleanup before returning, rather than
leaving it on the chain. Reindent much of this function.
* config/sparc/{xm-sun4sol2.h,xm-sun4os4.h},
config/i386/{xm-sun386.h,xm-i386m3.h,xm-i386mach.h},
config/m68k/{sun3os4.h,xm-news.h,xm-hp300hpux.h},
config/ns32k/xm-ns32km3.h: Remove all references to
BROKEN_LARGE_ALLOCA; with the above change it is no longer needed.
* main.c, fork-child.c, many config files: Remove all
SET_STACK_LIMIT_HUGE code; with the above changes it should no
longer be needed.
* symtab.c (lookup_partial_symbol): Use if and abort, not assert.
This avoids __eprintf troubles.
* main.c (main): Surround in #ifndef MAIN_OVERRIDE. Move
initialization code which needs to be called even if we bypass the
command line stuff into gdb_init.
* utils.c (fputs_unfiltered): Surround in #ifndef
FPUTS_UNFILTERED_OVERRIDE.
* Makefile.in (libgdb.a): New target.
* utils.c: Rearrange I/O stuff a bit so that all output goes
through fputs_unfiltered. Use vasprintf; removes arbitrary limit
which made %s not work with arbitrarily large strings.
* printcmd.c (printf_command): Use printf_filtered, not
printf_unfiltered and printf, now that arbitrary limit is gone.
Thu May 12 17:04:58 1994 Stan Shebs (shebs@andros.cygnus.com)
* mpw-make.in (INCLUDE_CFLAGS): Add readline source dir.
(READLINE_CFLAGS, READLINE_SRC, READLINE_DIR): Uncomment.
(TSOBS): Don't compile inflow.c.
(all, install): Add MacGDB.
* main.c (main): Do Mac-specific init and command loop if a
standalone app, skip full option help message if compiling
with MPW C.
(gdb_readline): If MPW, add a newline after the (gdb) prompt.
* utils.c (_initialize_utils): If MPW, don't try to use termcap to
compute the window size.
* config/m68k/xm-mpw.h (printf, fprintf, fputs, fputc, putc,
fflush): Define as macros that expand into hacked_... versions.
(StandAlone, mac_app): Declare.
* macgdb.r (SIZE): Set the default partition to 4000K.
* mac-xdep.c (readline.h, history.h): Include.
(terminal.h): Don't include.
(mac_app): Define.
(gdb_has_a_terminal): Define Mac-specific version.
(do_keyboard_command): Simplify search for command string.
(readline): Define as gdb_readline.
Add other history/readline stubs to make main gdb link.
(hacked_fprintf, hacked_printf, hacked_vfprintf, hacked_fputs,
hacked_fputc, hacked_fflush): New functions, intercept output to
stdout and stderr, send to console window.
(quit): Print annotation before printing the error message.
* main.c (return_to_top_level): Print annotation before doing the
longjmp.
* symtab.c (decode_line_1): Call error not warning and then
return_to_top_level. Call error_begin and printf_unfiltered
rather calling warning (before calls to return_to_top_level).
* core.c (memory_error): Use error_begin, printf_unfiltered,
print_address_numeric and return_to_top_level instead of error.
Cleans up a FIXME-32x64.
* language.c (type_error, range_error): Call error_begin
not just target_terminal_ours.
Change all references to stdout/stderr to gdb_stdout/gdb_stderr.
Replace all calls to stdio output functions with calls to
corresponding _unfiltered functions (`fprintf_unfiltered')
Replaced calls to fopen for output to gdb_fopen.
Added sufficient goo to utils.c and defs.h to make the above work.
The net effect is that stdio output functions are only directly used
in utils.c. Elsewhere, the _unfiltered and _filtered functions and
GDB_FILE type are used.
In the near future, GDB_FILE will stop being equivalant to FILE.
The semantics of some commands has changed in a very subtle way:
called in the right context, they may cause new occurences of
prompt_for_continue() behavior. The testsuite doesn't notice anything
like this, though.
Please respect this change by not reintroducing stdio output
dependencies in the main body of gdb code. All output from commands
should go to a GDB_FILE.
Target-specific code can still use stdio directly to communicate with
targets.
add a language parameter that is used to select the demangling
algorithm.
* defs.h (enum language): Move further up in file so enum can
be used in prototypes.
* defs.h (fputs_demangled): Update prototype to add lang arg.
* c-typeprint.c (cp_type_print_method_args): Add language arg
to fputs_demangled calls, remove DMGL_PARAMS flag.
* stack.c (print_frame_info): Remove obsolete code so we don't
have to update fputs_demangled usage in it.
* stack.c (print_frame_info, frame_info): Add language variable
to pass to fputs_demangled and initialize it from the symbol's
language. Call fputs_demangled with language arg.
* symtab.c (find_methods): Add language arg to fputs_demangled
call.
* defs.h (demangle_and_match): Remove prototype.
* dwarfread.c (STREQ, STREQN): Remove macros, replaced with STREQ
and STREQN defined in defs.h.
* dwarfread.c (set_cu_language): For completely unknown languages,
try to deduce the language from the filename. Retain behavior
that for known languages we don't know how to handle, we use
language_unknown.
* dwarfread.c (enum_type, symthesize_typedef): Initialize language
and demangled name fields in symbol.
* dwarfread.c, mipsread.c, partial-stab.h: For all usages of
ADD_PSYMBOL_TO_LIST, add language and objfile parameters.
* dwarfread.c (new_symbol): Attempt to demangle C++ symbol names
and cache the results in SYMBOL_DEMANGLED_NAME for the symbol.
* elfread.c (STREQ): Remove macro, use STREQ defined in defs.h.
Replace usages throughout.
* elfread.c (demangle.h): Include.
* elfread.c (record_minimal_symbol): Remove prototype and function.
* gdbtypes.h, symtab.h (B_SET, B_CLR, B_TST, B_TYPE, B_BYTES,
B_CLRALL): Moved from symtab.h to gdbtypes.h.
* infcmd.c (jump_command): Remove code to demangle name and add
it to a cleanup list. Now just use SYMBOL_DEMANGLED_NAME.
* minsyms.c (demangle.h): Include.
* minsyms.c (lookup_minimal_symbol): Indent comment to match code.
* minsyms.c (install_minimal_symbols): Attempt to demangle symbol
names as C++ names, and cache them in SYMBOL_DEMANGLED_NAME.
* mipsread.c (psymtab_language): Add static variable.
* stabsread.c (demangle.h): Include.
* stabsread.c (define_symbol): Attempt to demangle C++ symbol
names and cache them in the SYMBOL_DEMANGLED_NAME field.
* stack.c (return_command): Remove explicit demangling of name
and use of cleanups. Just use SYMBOL_DEMANGLED_NAME.
* symfile.c (demangle.h): Include.
* symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list): Fix
to match macros in symfile.h and allow them to be compiled
if INLINE_ADD_PSYMBOL is not true.
* symfile.h (INLINE_ADD_PSYMBOL): Default to true if not set.
* symfile.h (ADD_PSYMBOL_*): Add language and objfile parameters.
Add code to demangle and cache C++ symbol names. Use macro form
if INLINE_ADD_PSYMBOL is true, otherwise use C function form.
* symmisc.c (add_psymbol_to_list, add_psymbol_addr_to_list):
Remove, also defined in symfile.c, which we already fixed.
* symtab.c (expensive_mangler): Remove prototype and function.
* symtab.c (find_methods): Remove physnames parameter and fix
prototype to match.
* symtab.c (completion_list_add_symbol): Name changed to
completion_list_add_name.
* symtab.c (COMPLETION_LIST_ADD_SYMBOL): New macro, adds both
the normal symbol name and the cached C++ demangled name.
* symtab.c (lookup_demangled_partial_symbol,
lookup_demangled_block_symbol): Remove prototypes and functions.
* symtab.c (lookup_symbol): Remove use of expensive_mangler,
use lookup_block_symbol instead of lookup_demangled_block_symbol.
Remove code to try demangling names and matching them.
* symtab.c (lookup_partial_symbol, lookup_block_symbol):
Fix to try matching the cached demangled name if no match is
found using the regular symbol name.
* symtab.c (find_methods): Remove unused physnames array.
* symtab.c (name_match, NAME_MATCH): Remove function and macro,
replaced with SYMBOL_MATCHES_REGEXP from symtab.h.
* symtab.c (completion_list_add_symbol): Rewrite to use cached
C++ demangled symbol names.
* symtab.h: Much reformatting of structures and such to add
whitespace to make them more readable, and make them more
consistent with other gdb structure definitions.
* symtab.h (general_symbol_info): New struct containing fields
common to all symbols.
* symtab.h (SYMBOL_LANGUAGE, SYMBOL_DEMANGLED_NAME,
SYMBOL_SOURCE_NAME, SYMBOL_LINKAGE_NAME, SYMBOL_MATCHES_NAME,
SYMBOL_MATCHES_REGEXP, MSYMBOL_INFO, MSYMBOL_TYPE): New macros.
* symtab. (struct minimal_symbol, struct partial_symbol, struct
symbol): Use general_symbol_info struct.
* utils.c (demangle_and_match): Remove, no longer used.
* valops.c (demangle.h): Include.
* xcoffexec.c (eq): Remove macro, replace usages with STREQ.
* blockframe.c, breakpoint.c, c-exp.y, c-valprint.c, dbxread.c,
infcmd.c, m2-exp.y, minsyms.c, objfiles.h, solib.c, stack.c,
symmisc.c, symtab.c, valops.c: Replace references to minimal
symbol fields with appropriate macros.
* breakpoint.c, buildsym.c, c-exp.y, c-typeprint.c, c-valprint.c,
coffread.c, command.c, convex-tdep.c, cp-valprint.c, dbxread.c,
demangle.c, elfread.c, energize.c, environ.c, exec.c,
gdbtypes.c, i960-tdep.c, infrun.c, infrun-hacked.c, language.c,
main.c, minsyms.c, mipsread.c, partial-stab.h, remote-es1800.c,
remote-nindy.c, remote-udi.c, rs6000-tdep.c, solib.c, source.c,
sparc-pinsn.c, stabsread.c, standalone.c, state.c, stuff.c,
symfile.c, symmisc.c, symtab.c, symtab.h, tm-sysv4.h,
tm-ultra3.h, values.c, xcoffexec.c, xcoffread.c: Replace strcmp
and strncmp usages with STREQ, STREQN, or STRCMP as appropriate.
* breakpoint.c, buildsym.c, c-typeprint.c, expprint.c, findvar.c,
mipsread.c, printcmd.c, source.c, stabsread.c, stack.c,
symmisc.c, tm-29k.h, valops.c, values.c: Replace SYMBOL_NAME
references with SYMBOL_SOURCE_NAME or SYMBOL_LINKAGE_NAME as
appropriate.
* buildsym.c (start_subfile, patch_subfile_names): Default the
source language to what can be deduced from the filename.
* buildsym.c (end_symtab): Update the source language in the
allocated symtab to match what we have been using.
* buildsym.h (struct subfile): Add a language field.
* c-typeprint.c (c_print_type): Remove code to do explicit
demangling.
* dbxread.c (psymtab_language): Add static variable.
* dbxread.c (start_psymtab): Initialize psymtab_language using
deduce_language_from_filename.
* complaints.c (complain): Made into a varargs function.
* complaints.h: New file, code moved from symfile.h.
* Makefile.in (SFILES_MAINDIR): Add complaints.c.
* Makefile.in (HFILES): Add complaints.h.
* Makefile.in (OBS): Add complaints.o.
* symfile.c (complaint_root, stop_whining, complaint_series,
complain, clear_complaints, add_show_from_set for stop_whining):
Moved to complaints.c.
* symfile.h (struct complaint, complaint_root decl, complain
prototype, clear_complaints prototype): Moved to complaints.h.
* buildsym.c, coffread.c, dbxread.c, dwarfread.c, elfread.c,
gdbtypes.c, mipsread.c, stbsread.c, symfile.c: Include
complaints.h. Remove casts from arguments to complain(),
which is now a varargs function, and remove unnecessary
placeholder zero args.
* defs.h (begin_line): Add prototype.
* defs.h (vprintf_filtered): Add prototype.
* dwarfread.c (varargs.h): Remove, no longer needed.
* dwarfread.c (dwarfwarn): Remove prototype and function.
* dwarfread.c (complaints): Define a bunch of complaints.
* dwarfread.c (SQUAWK): Remove macro defs, convert all
usages to standard complain() calls.
* utils.c (begin_line): New function that ensures that
whatever gets filter-printed next starts on its own line.
* utils.c (vprintf_filtered): New func, like vfprintf_filtered,
but to stdout (calls vfprintf_filtered internally).
before printing anything, and again afterward. Fix comments.
(vfprintf_filtered): Eliminate static buffer; use auto buffer,
or alloca() if needed.
* rs6000-xdep.c: Use correct conditional (IBM6000_TARGET) to
detect native versus cross-host.
Fix from Jim Williams.
* stack.c (return_command): Evaluate expression *before* popping
off the stack frames! Fix inspired by Jim Williams.
(up_silently_command, down_silently_command): No sel frame is error.
* defs.h (memcpy, memset): Conditionalize decls on
#ifndef MEM_FNS_DECLARED, since DECstation differs.
(alloca): Break out the STDC and non-STDC alloca cases, to make
it work on old preprocessors as well as "picky ANSI" ones.
* xm-mips.h (memcpy, memset): Declare, and set MEM_FNS_DECLARED.
* mips-tdep.c (heuristic_proc_start): Zero arg produces zero.
* utils.c (fputs_demangled): Rename SLOP since DECstation system
header files define it!
symtab.h, tm-i386v4.h, valprint.c, values.c: Lint.
* breakpoint.c, c-exp.y, coffread.c, command.c, environ.c, eval.c,
findvar.c, infcmd.c, infptrace.c, infrun.c, m2-exp.y, parse.c,
putenv.c, solib.c, sparc-xdep.c, symtab.c, tm-i386v.h, tm-sparc.h,
utils.c, valarith.c, valops.c, valprint.c, values.c:
Replace bcopy() use with memcpy(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
* breakpoint.c, buildsym.c, coffread.c, dbxread.c, i386-tdep.c,
ieee-float.c, infcmd.c, sparc-tdep.c, stack.c, symtab.c, symtab.h,
target.c, values.c:
Replace bzero() use with memset(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
* i386-tdep.c, main.c, valprint.c:
Replace bcmp() use with memcmp(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
It gets permanently stuck in many OSes.
* breakpoint.c, infcmd.c, infrun.c, utils.c: Change many printfs
to printf_filtered.
* breakpoint.c: Improve help text for info breakpoints.
libiberty/strsignal.c. Widespread changes to use libiberty/strerror.c
functions for errno manipulations and libiberty/strsignal.c for signo
(signals) manipulations.
* All GDB files that #include defs.h: Removed stdio.h.
(defs.h): #include stdio.h.
This has been tested by building GDBs for all targets hosted on Sun4.
None of the build problems were related to stdio.h inclusion. (n.b.
many configurations don't build for other reasons.)
to make prototypes for all functions declared here.
* cplus-dem.c: Avoid declaring xmalloc and xrealloc.
* c-exp.y: Rename SIGNED, OR, and AND to avoid conflict.
* environ.c: Include <stdio.h> before defs.h. Minor cleanup.
* ieee-float.h: Use PARAMS for prototypes; make some params const.
* ieee-float.c, valarith.c: Include <stdio.h>. Lint. b*=>mem*.
* m2-exp.y: Remove unused CONST; Rename OR and AND.
* utils.c: Avoid declaring malloc and realloc. Lint.
(request_quit): Accept signal-number parameter.
Change svr4 references to sysv4.
* source.c: Move declaration of external function index to
front of file so it is in scope for all references.
* utils.c (error, fatal): Make definitions consistent with
defs.h declarations (declared as "volatile void").
rather than jumping back to command level. Modules that want to print
their own warnings without calling warning() can call warning_setup() to
handle the terminal compatibly with warning() and error().
first.
* main.c (main, print_gnu_advertisement, print_gdb_version):
Reformat legalese so it always prints, but acts as an "I'm here"
message while symbols are being read. If any errors occur,
print a few newlines to set off the message and start it at the
left margin. Remove mention of "help" command, and don't yak about
symbol reading.
(catch_errors): Error string is now printed first in case of
error, not last.
* command.c (undef_cmd_error, lookup_cmd): On undefined command,
suggest the "help" command.
* Makefile.in (VERSION): Set to 4.0.2.
* core.c (core_open): Open file ourselves, read or r/w, depending on
write_files. Use bfd_fdopenr.
* gdbcore.h (write_files): New variable.
* exec.c (write_files): Define variable, add set&show for it.
(exec_file_command): Use write_files to open for read or r/write.
Make shared library reading happen automatically. These changes
are mostly from Peter Schauer <pes@regent.e-technik.tu-muenchen.de>.
* inferior.h (stop_soon_quietly): Add to exported variables.
* infrun.c (child_create_inferior): call solib hook, if defined.
(child_attach): call solib hook, if defined.
* solib.c: Include inferior.h. Add from_tty to so_list as kludge.
(find_solib): Use lookup_misc_func rather than hand-rolled.
(symbol_add_stub): New stub for catch_errors.
(solib_add): Avoid output if !from_tty. Catch errors rather
than just calling symbol_file_add and bombing.
(solib_create_inferior_hook): Interface with the target process
to let it read and alloc shared libs, then figure out what it did.
* core.c (validate_files): Fix typo, soften warning.
(Fix from Hiroto Kagotani <kagotani@cs.titech.ac.jp>.)
* utils.c (fputs_demangled): Avoid duplicate printing if
demangling is off. (Fix from J.T. Conklin <jtc@cayenne.com>.)
* infrun.c (proceed): Cast -1 to (CORE_ADDR) before comparing.
(Fix from pierre@la.tce.com (Pierre Willard).)
* main.c (catch_errors): Change argument to a char * from an int,
since a char * can point to a struct full of glop, but an int
is not guaranteed to be able to hold a pointer.
* breakpoint.c (breakpoint_cond_eval, bpstat_stop_status,
breakpoint_re_set_one, breakpoint_re_set): Adapt.
* core.c (core_open, solib_add_stub): Adapt.
* remote-vx.c (symbol_stub, add_symbol_stub, callers): Adapt.
* tm-sparc.h (PC_ADJUST): Avoid calling error() from this;
it causes recursive calls to error() when used in cleanups.
To do so requires that we make it a function, so we do.
* sparc-tdep.c (sparc_pc_adjust): New implem of PC_ADJUST.
* utils.c (do_cleanups): Remove the current cleanup from the
chain *before* calling it, in case error() is called from it.
The result won't be pretty, but won't be an infinite loop either.
(long_options): Terminate with a zero element.
[Bugfix from Atsuo Kawaguchi <atsuo@hark86.harl.hitachi.co.jp>.]
(gdb_readline): Make call-compatible with readline.
(init_signals): Improve comments re vfork vs. signal.
* utils.c (prompt_for_continue): Use new gdb_readline().
If we prompt for continuation, we don't let CR repeat the previous
command, once we get back to a prompt. It's too easy to keep
hitting CR, expecting "--more--" prompts, and have some long
command start repeating on you.
Andrew Cagney