This removes save_inferior_ptid, a cleanup function, in favor of
scoped_restore.
This also fixes a possible (it seems unlikely that it could happen in
practice) memory leak -- save_inferior_ptid should have used
make_cleanup_dtor, because it allocated memory.
I tested this on the buildbot. However, there are two caveats to
this. First, sometimes it seems I misread the results. Second, I
think this patch touches some platforms that can't be tested by the
buildbot. So, extra care seems warranted.
ChangeLog
2017-08-18 Tom Tromey <tom@tromey.com>
Pedro Alves <palves@redhat.com>
* spu-multiarch.c (parse_spufs_run): Use scoped_restore.
* sol-thread.c (sol_thread_resume, sol_thread_wait)
(sol_thread_xfer_partial, rw_common): Use scoped_restore.
* procfs.c (procfs_do_thread_registers): Use scoped_restore.
* proc-service.c (ps_xfer_memory): Use scoped_restore.
* linux-tdep.c (linux_corefile_thread): Remove a cleanup.
(linux_get_siginfo_data): Add "thread" argument. Use
scoped_restore.
* linux-nat.c (linux_child_follow_fork)
(check_stopped_by_watchpoint): Use scoped_restore.
* infrun.c (displaced_step_prepare_throw, write_memory_ptid)
(THREAD_STOPPED_BY, handle_signal_stop): Use scoped_restore.
(restore_inferior_ptid, save_inferior_ptid): Remove.
* btrace.c (btrace_fetch): Use scoped_restore.
* bsd-uthread.c (bsd_uthread_fetch_registers)
(bsd_uthread_store_registers): Use scoped_restore.
* breakpoint.c (reattach_breakpoints, detach_breakpoints): Use
scoped_restore.
* aix-thread.c (aix_thread_resume, aix_thread_wait)
(aix_thread_xfer_partial): Use scoped_restore.
* inferior.h (save_inferior_ptid): Remove.
Obvious fix for:
aix-thread.c: In function 'char* pd_status2str(int)':
aix-thread.c:163:33: error: deprecated conversion from string constant to 'char*' [-Werror=write-strings]
case PTHDB_SUCCESS: return "SUCCESS";
^
gdb/ChangeLog:
* aix-thread.c (pd_status2str): Change return type to const char *.
This patch starts from the desire to eliminate
make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file &
friends a real C++ class hierarchy, and switches temporary
ui_file-like objects to stack-based allocation.
- mem_fileopen -> string_file
mem_fileopen is replaced with a new string_file class that is treated
as a value class created on the stack. This alone eliminates most
make_cleanup_ui_file_delete calls, and, simplifies code a whole lot
(diffstat shows around 1k loc dropped.)
string_file's internal buffer is a std::string, thus the "string" in
the name. This simplifies the implementation much, compared to
mem_fileopen, which managed growing its internal buffer manually.
- ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone
The new string_file class has a string() method that provides direct
writable access to the internal std::string buffer. This replaced
ui_file_as_string, which forced a copy of the same data the stream had
inside. With direct access via a writable reference, we can instead
move the string out of the string_stream, avoiding deep string
copying.
Related, ui_file_xstrdup calls are replaced with xstrdup'ping the
stream's string, and ui_file_obsavestring is replaced by
obstack_copy0.
With all those out of the way, getting rid of the weird ui_file_put
mechanism was possible.
- New ui_file::printf, ui_file::puts, etc. methods
These simplify / clarify client code. I considered splitting
client-code changes, like these, e.g.:
- stb = mem_fileopen ();
- fprintf_unfiltered (stb, "%s%s%s",
- _("The valid values are:\n"),
- regdesc,
- _("The default is \"std\"."));
+ string_file stb;
+ stb.printf ("%s%s%s",
+ _("The valid values are:\n"),
+ regdesc,
+ _("The default is \"std\"."));
In two steps, with the first step leaving fprintf_unfiltered (etc.)
calls in place, and only afterwards do a pass to change all those to
call stb.printf etc.. I didn't do that split, because (when I tried),
it turned out to be pointless make-work: the first pass would have to
touch the fprintf_unfiltered line anyway, to replace "stb" with
"&stb".
- gdb_fopen replaced with stack-based objects
This avoids the need for cleanups or unique_ptr's. I.e., this:
struct ui_file *file = gdb_fopen (filename, "w");
if (filename == NULL)
perror_with_name (filename);
cleanups = make_cleanup_ui_file_delete (file);
// use file.
do_cleanups (cleanups);
is replaced with this:
stdio_file file;
if (!file.open (filename, "w"))
perror_with_name (filename);
// use file.
- odd contorsions in null_file_write / null_file_fputs around when to
call to_fputs / to_write eliminated.
- Global null_stream object
A few places that were allocating a ui_file in order to print to
"nowhere" are adjusted to instead refer to a new 'null_stream' global
stream.
- TUI's tui_sfileopen eliminated. TUI's ui_file much simplified
The TUI's ui_file was serving a dual purpose. It supported being used
as string buffer, and supported being backed by a stdio FILE. The
string buffer part is gone, replaced by using of string_file. The
'FILE *' support is now much simplified, by making the TUI's ui_file
inherit from stdio_file.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* ada-lang.c (type_as_string): Use string_file.
* ada-valprint.c (ada_print_floating): Use string_file.
* ada-varobj.c (ada_varobj_scalar_image)
(ada_varobj_get_value_image): Use string_file.
* aix-thread.c (aix_thread_extra_thread_info): Use string_file.
* arm-tdep.c (_initialize_arm_tdep): Use string_printf.
* breakpoint.c (update_inserted_breakpoint_locations)
(insert_breakpoint_locations, reattach_breakpoints)
(print_breakpoint_location, print_one_detail_ranged_breakpoint)
(print_it_watchpoint): Use string_file.
(save_breakpoints): Use stdio_file.
* c-exp.y (oper): Use string_file.
* cli/cli-logging.c (set_logging_redirect): Use ui_file_up and
tee_file.
(pop_output_files): Use delete.
(handle_redirections): Use stdio_file and tee_file.
* cli/cli-setshow.c (do_show_command): Use string_file.
* compile/compile-c-support.c (c_compute_program): Use
string_file.
* compile/compile-c-symbols.c (generate_vla_size): Take a
'string_file &' instead of a 'ui_file *'.
(generate_c_for_for_one_variable): Take a 'string_file &' instead
of a 'ui_file *'. Use string_file.
(generate_c_for_variable_locations): Take a 'string_file &'
instead of a 'ui_file *'.
* compile/compile-internal.h (generate_c_for_for_one_variable):
Take a 'string_file &' instead of a 'ui_file *'.
* compile/compile-loc2c.c (push, pushf, unary, binary)
(print_label, pushf_register_address, pushf_register)
(do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a
'ui_file *'. Adjust.
* compile/compile.c (compile_to_object): Use string_file.
* compile/compile.h (compile_dwarf_expr_to_c)
(compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a
'ui_file *'.
* cp-support.c (inspect_type): Use string_file and obstack_copy0.
(replace_typedefs_qualified_name): Use string_file and
obstack_copy0.
* disasm.c (gdb_pretty_print_insn): Use string_file.
(gdb_disassembly): Adjust reference the null_stream global.
(do_ui_file_delete): Delete.
(gdb_insn_length): Use null_stream.
* dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file.
* dwarf2loc.c (dwarf2_compile_property_to_c)
(locexpr_generate_c_location, loclist_generate_c_location): Take a
'string_file &' instead of a 'ui_file *'.
* dwarf2loc.h (dwarf2_compile_property_to_c): Likewise.
* dwarf2read.c (do_ui_file_peek_last): Delete.
(dwarf2_compute_name): Use string_file.
* event-top.c (gdb_setup_readline): Use stdio_file.
* gdbarch.sh (verify_gdbarch): Use string_file.
* gdbtypes.c (safe_parse_type): Use null_stream.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use
string_file.
* guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a
'string_file *' instead of a 'ui_file *'.
(gdbscm_arch_disassemble): Use string_file.
* guile/scm-frame.c (frscm_print_frame_smob): Use string_file.
* guile/scm-ports.c (class ioscm_file_port): Now a class that
inherits from ui_file.
(ioscm_file_port_delete, ioscm_file_port_rewind)
(ioscm_file_port_put): Delete.
(ioscm_file_port_write): Rename to ...
(ioscm_file_port::write): ... this. Remove file_port_magic
checks.
(ioscm_file_port_new): Delete.
(ioscm_with_output_to_port_worker): Use ioscm_file_port and
ui_file_up.
* guile/scm-type.c (tyscm_type_name): Use string_file.
* guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print):
Use string_file.
* infcmd.c (print_return_value_1): Use string_file.
* infrun.c (print_target_wait_results): Use string_file.
* language.c (add_language): Use string_file.
* location.c (explicit_to_string_internal): Use string_file.
* main.c (captured_main_1): Use null_file.
* maint.c (maintenance_print_architecture): Use stdio_file.
* mi/mi-cmd-stack.c (list_arg_or_local): Use string_file.
* mi/mi-common.h (struct mi_interp) <out, err, log, targ,
event_channel>: Change type to mi_console_file pointer.
* mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush)
(mi_console_file_delete): Delete.
(struct mi_console_file): Delete.
(mi_console_file_magic): Delete.
(mi_console_file_new): Delete.
(mi_console_file::mi_console_file): New.
(mi_console_file_delete): Delete.
(mi_console_file_fputs): Delete.
(mi_console_file::write): New.
(mi_console_raw_packet): Delete.
(mi_console_file::flush): New.
(mi_console_file_flush): Delete.
(mi_console_set_raw): Rename to ...
(mi_console_file::set_raw): ... this.
* mi/mi-console.h (class mi_console_file): New class.
(mi_console_file_new, mi_console_set_raw): Delete.
* mi/mi-interp.c (mi_interpreter_init): Use mi_console_file.
(mi_set_logging): Use delete and tee_file. Adjust.
* mi/mi-main.c (output_register): Use string_file.
(mi_cmd_data_evaluate_expression): Use string_file.
(mi_cmd_data_read_memory): Use string_file.
(mi_cmd_execute, print_variable_or_computed): Use string_file.
* mi/mi-out.c (mi_ui_out::main_stream): New.
(mi_ui_out::rewind): Use main_stream and
string_file.
(mi_ui_out::put): Use main_stream and string_file.
(mi_ui_out::mi_ui_out): Remove 'stream' parameter.
Allocate a 'string_file' instead.
(mi_out_new): Don't allocate a mem_fileopen stream here.
* mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter.
(mi_ui_out::main_stream): Declare method.
* printcmd.c (eval_command): Use string_file.
* psymtab.c (maintenance_print_psymbols): Use stdio_file.
* python/py-arch.c (archpy_disassemble): Use string_file.
* python/py-breakpoint.c (bppy_get_commands): Use string_file.
* python/py-frame.c (frapy_str): Use string_file.
* python/py-framefilter.c (py_print_type, py_print_single_arg):
Use string_file.
* python/py-type.c (typy_str): Use string_file.
* python/py-unwind.c (unwind_infopy_str): Use string_file.
* python/py-value.c (valpy_str): Use string_file.
* record-btrace.c (btrace_insn_history): Use string_file.
* regcache.c (regcache_print): Use stdio_file.
* reggroups.c (maintenance_print_reggroups): Use stdio_file.
* remote.c (escape_buffer): Use string_file.
* rust-lang.c (rust_get_disr_info): Use string_file.
* serial.c (serial_open_ops_1): Use stdio_file.
(do_serial_close): Use delete.
* stack.c (print_frame_arg): Use string_file.
(print_frame_args): Remove local mem_fileopen stream, not used.
(print_frame): Use string_file.
* symmisc.c (maintenance_print_symbols): Use stdio_file.
* symtab.h (struct symbol_computed_ops) <generate_c_location>:
Take a 'string_file *' instead of a 'ui_file *'.
* top.c (new_ui): Use stdio_file and stderr_file.
(free_ui): Use delete.
(execute_command_to_string): Use string_file.
(quit_confirm): Use string_file.
* tracepoint.c (collection_list::append_exp): Use string_file.
* tui/tui-disasm.c (tui_disassemble): Use string_file.
* tui/tui-file.c: Don't include "ui-file.h".
(enum streamtype, struct tui_stream): Delete.
(tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen)
(tui_file_isatty, tui_file_rewind, tui_file_put): Delete.
(tui_file::tui_file): New method.
(tui_file_fputs): Delete.
(tui_file_get_strbuf): Delete.
(tui_file::puts): New method.
(tui_file_adjust_strbuf): Delete.
(tui_file_flush): Delete.
(tui_file::flush): New method.
* tui/tui-file.h: Tweak intro comment.
Include ui-file.h.
(tui_fileopen, tui_sfileopen, tui_file_get_strbuf)
(tui_file_adjust_strbuf): Delete declarations.
(class tui_file): New class.
* tui/tui-io.c (tui_initialize_io): Use tui_file.
* tui/tui-regs.c (tui_restore_gdbout): Use delete.
(tui_register_format): Use string_stream.
* tui/tui-stack.c (tui_make_status_line): Use string_file.
(tui_get_function_from_frame): Use string_file.
* typeprint.c (type_to_string): Use string_file.
* ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete.
(null_stream): New global.
(ui_file_delete): Delete.
(ui_file::ui_file): New.
(null_file_isatty): Delete.
(ui_file::~ui_file): New.
(null_file_rewind): Delete.
(ui_file::printf): New.
(null_file_put): Delete.
(null_file_flush): Delete.
(ui_file::putstr): New.
(null_file_write): Delete.
(ui_file::putstrn): New.
(null_file_read): Delete.
(ui_file::putc): New.
(null_file_fputs): Delete.
(null_file_write_async_safe): Delete.
(ui_file::vprintf): New.
(null_file_delete): Delete.
(null_file::write): New.
(null_file_fseek): Delete.
(null_file::puts): New.
(ui_file_data): Delete.
(null_file::write_async_safe): New.
(gdb_flush, ui_file_isatty): Adjust.
(ui_file_put, ui_file_rewind): Delete.
(ui_file_write): Adjust.
(ui_file_write_for_put): Delete.
(ui_file_write_async_safe, ui_file_read): Adjust.
(ui_file_fseek): Delete.
(fputs_unfiltered): Adjust.
(set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind)
(set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe)
(set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek)
(set_ui_file_data): Delete.
(string_file::~string_file, string_file::write)
(struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup)
(do_ui_file_as_string, ui_file_as_string): Delete.
(do_ui_file_obsavestring, ui_file_obsavestring): Delete.
(struct mem_file): Delete.
(mem_file_new): Delete.
(stdio_file::stdio_file): New.
(mem_file_delete): Delete.
(stdio_file::stdio_file): New.
(mem_fileopen): Delete.
(stdio_file::~stdio_file): New.
(mem_file_rewind): Delete.
(stdio_file::set_stream): New.
(mem_file_put): Delete.
(stdio_file::open): New.
(mem_file_write): Delete.
(stdio_file_magic, struct stdio_file): Delete.
(stdio_file_new, stdio_file_delete, stdio_file_flush): Delete.
(stdio_file::flush): New.
(stdio_file_read): Rename to ...
(stdio_file::read): ... this. Adjust.
(stdio_file_write): Rename to ...
(stdio_file::write): ... this. Adjust.
(stdio_file_write_async_safe): Rename to ...
(stdio_file::write_async_safe) ... this. Adjust.
(stdio_file_fputs): Rename to ...
(stdio_file::puts) ... this. Adjust.
(stdio_file_isatty): Delete.
(stdio_file_fseek): Delete.
(stdio_file::isatty): New.
(stderr_file_write): Rename to ...
(stderr_file::write) ... this. Adjust.
(stderr_file_fputs): Rename to ...
(stderr_file::puts) ... this. Adjust.
(stderr_fileopen, stdio_fileopen, gdb_fopen): Delete.
(stderr_file::stderr_file): New.
(tee_file_magic): Delete.
(struct tee_file): Delete.
(tee_file::tee_file): New.
(tee_file_new): Delete.
(tee_file::~tee_file): New.
(tee_file_delete): Delete.
(tee_file_flush): Rename to ...
(tee_file::flush): ... this. Adjust.
(tee_file_write): Rename to ...
(tee_file::write): ... this. Adjust.
(tee_file::write_async_safe): New.
(tee_file_fputs): Rename to ...
(tee_file::puts): ... this. Adjust.
(tee_file_isatty): Rename to ...
(tee_file::isatty): ... this. Adjust.
* ui-file.h (struct obstack, struct ui_file): Don't
forward-declare.
(ui_file_new, ui_file_flush_ftype, set_ui_file_flush)
(ui_file_write_ftype)
(set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs)
(ui_file_write_async_safe_ftype, set_ui_file_write_async_safe)
(ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype)
(set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind)
(ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put)
(ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype)
(set_ui_file_fseek): Delete.
(ui_file_data, ui_file_delete, ui_file_rewind)
(struct ui_file): New.
(ui_file_up): New.
(class null_file): New.
(null_stream): Declare.
(ui_file_write_for_put, ui_file_put): Delete.
(ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring):
Delete.
(ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen)
(gdb_fopen, tee_file_new): Delete.
(struct string_file): New.
(struct stdio_file): New.
(stdio_file_up): New.
(struct stderr_file): New.
(class tee_file): New.
* ui-out.c (ui_out::field_stream): Take a 'string_file &' instead
of a 'ui_file *'. Adjust.
* ui-out.h (class ui_out) <field_stream>: Likewise.
* utils.c (do_ui_file_delete, make_cleanup_ui_file_delete)
(null_stream): Delete.
(error_stream): Take a 'string_file &' instead of a 'ui_file *'.
Adjust.
* utils.h (struct ui_file): Delete forward declaration..
(make_cleanup_ui_file_delete, null_stream): Delete declarations.
(error_stream): Take a 'string_file &' instead of a
'ui_file *'.
* varobj.c (varobj_value_get_print_value): Use string_file.
* xtensa-tdep.c (xtensa_verify_config): Use string_file.
* gdbarch.c: Regenerate.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
We currently get:
../../src/gdb/aix-thread.c: In function 'int pdc_read_data(pthdb_user_t, void*, pthdb_addr_t, size_t)':
../../src/gdb/aix-thread.c:465:46: error: invalid conversion from 'void*' to 'gdb_byte* {aka unsigned char*}' [-fpermissive]
status = target_read_memory (addr, buf, len);
^
../../src/gdb/aix-thread.c: In function 'void aix_thread_resume(target_ops*, ptid_t, int, gdb_signal)':
../../src/gdb/aix-thread.c:1010:46: error: invalid conversion from 'void*' to 'int*' [-fpermissive]
gdb_signal_to_host (sig), (void *) tid);
^
../../src/gdb/aix-thread.c:243:1: error: initializing argument 5 of 'int ptrace64aix(int, int, long long int, int, int*)' [-fpermissive]
ptrace64aix (int req, int id, long long addr, int data, int *buf)
../../src/gdb/rs6000-nat.c: In function 'gdb_byte* rs6000_ptrace_ldinfo(ptid_t)':
../../src/gdb/rs6000-nat.c:596:36: error: invalid conversion from 'void*' to 'gdb_byte* {aka unsigned char*}' [-fpermissive]
gdb_byte *ldi = xmalloc (ldi_size);
^
../../src/gdb/rs6000-nat.c:615:36: error: invalid conversion from 'void*' to 'gdb_byte* {aka unsigned char*}' [-fpermissive]
ldi = xrealloc (ldi, ldi_size);
^
(and more instances of the same).
gdb/ChangeLog:
2016-04-21 Pedro Alves <palves@redhat.com>
* aix-thread.c (pdc_read_data, pdc_write_data): Add cast.
(aix_thread_resume): Use PTRACE_TYPE_ARG5.
* rs6000-nat.c (rs6000_ptrace64): Use PTRACE_TYPE_ARG5.
(rs6000_ptrace_ldinfo): Change type of 'ldi' local to void
pointer, and cast return to gdb_byte pointer.
record-btrace was the only target making use of this, and it no longer
uses it.
gdb/ChangeLog:
2015-03-04 Pedro Alves <palves@redhat.com>
* target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
(target_decr_pc_after_break): Delete declaration.
* target.c (default_target_decr_pc_after_break)
(target_decr_pc_after_break): Delete.
* linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
* linux-thread-db.c (check_event): Likewise.
* infrun.c (adjust_pc_after_break): Likewise.
* darwin-nat.c (cancel_breakpoint): Likewise.
* aix-thread.c (aix_thread_wait): Likewise.
* target-delegates.c: Regenerate.
This patch renames symbols that happen to have names which are
reserved keywords in C++.
Most of this was generated with Tromey's cxx-conversion.el script.
Some places where later hand massaged a bit, to fix formatting, etc.
And this was rebased several times meanwhile, along with re-running
the script, so re-running the script from scratch probably does not
result in the exact same output. I don't think that matters anyway.
gdb/
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
Rename symbols whose names are reserved C++ keywords throughout.
gdb/gdbserver/
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
Rename symbols whose names are reserved C++ keywords throughout.
A patch in the target cleanup series caused a regression when using
record with target-async. Version 4 of the patch is here:
https://sourceware.org/ml/gdb-patches/2014-03/msg00159.html
The immediate problem is that record supplies to_can_async_p and
to_is_async_p methods, but does not supply a to_async method. So,
when target-async is set, record claims to support async -- but if the
underlying target does not support async, then the to_async method
call will end up in that method's default implementation, namely
tcomplain.
This worked previously because the record target used to provide a
to_async method; one that (erroneously, only at push time) checked the
other members of the target stack, and then simply dropped to_async
calls in the "does not implement async" case.
My first thought was to simply drop tcomplain as the default for
to_async. This works, but Pedro pointed out that the only reason
record has to supply to_can_async_p and to_is_async_p is that these
default to using the find_default_run_target machinery -- and these
defaults are only needed by "run" and "attach".
So, a nicer solution presents itself: change run and attach to
explicitly call into the default run target when needed; and change
to_is_async_p and to_can_async_p to default to "return 0". This makes
the target stack simpler to use and lets us remove the method
implementations from record. This is also in harmony with other plans
for the target stack; namely trying to reduce the impact of
find_default_run_target. This approach makes it clear that
find_default_is_async_p is not needed -- it is asking whether a target
that may not even be pushed is actually async, which seems like a
nonsensical question.
While an improvement, this approach proved to introduce the same bug
when using the core target. Looking a bit deeper, the issue is that
code in "attach" and "run" may need to use either the current target
stack or the default run target -- but different calls into the target
API in those functions could wind up querying different targets.
This new patch makes the target to use more explicit in "run" and
"attach". Then these commands explicitly make the needed calls
against that target. This ensures that a single target is used for
all relevant operations. This lets us remove a couple find_default_*
functions from various targets, including the dummy target. I think
this is a decent understandability improvement.
One issue I see with this patch is that the new calls in "run" and
"attach" are not very much like the rest of the target API. I think
fundamentally this is due to bad factoring in the target API, which
may need to be fixed for multi-target. Tackling that seemed ambitious
for a regression fix.
While working on this I noticed that there don't seem to be any test
cases that involve both target-async and record, so this patch changes
break-precsave.exp to add some. It also changes corefile.exp to add
some target-async tests; these pass with current trunk and with this
patch applied, but fail with the v1 patch.
This patch differs from v4 in that it moves initialization of
to_can_async_p and to_supports_non_stop into inf-child, adds some
assertions to complete_target_initialization, and adds some comments
to target.h.
Built and regtested on x86-64 Fedora 20.
2014-03-12 Tom Tromey <tromey@redhat.com>
* inf-child.c (return_zero): New function.
(inf_child_target): Set to_can_async_p, to_supports_non_stop.
* aix-thread.c (aix_thread_inferior_created): New function.
(aix_thread_attach): Remove.
(init_aix_thread_ops): Don't set to_attach.
(_initialize_aix_thread): Register inferior_created observer.
* corelow.c (init_core_ops): Don't set to_attach or
to_create_inferior.
* exec.c (init_exec_ops): Don't set to_attach or
to_create_inferior.
* infcmd.c (run_command_1): Use find_run_target. Make direct
target calls.
(attach_command): Use find_attach_target. Make direct target
calls.
* record-btrace.c (init_record_btrace_ops): Don't set
to_create_inferior.
* record-full.c (record_full_can_async_p, record_full_is_async_p):
Remove.
(init_record_full_ops, init_record_full_core_ops): Update. Don't
set to_create_inferior.
* target.c (complete_target_initialization): Add assertion.
(target_create_inferior): Remove.
(find_default_attach, find_default_create_inferior): Remove.
(find_attach_target, find_run_target): New functions.
(find_default_is_async_p, find_default_can_async_p)
(target_supports_non_stop, target_attach): Remove.
(init_dummy_target): Don't set to_create_inferior or
to_supports_non_stop.
* target.h (struct target_ops) <to_attach>: Add comment. Remove
TARGET_DEFAULT_FUNC.
<to_create_inferior>: Add comment.
<to_can_async_p, to_is_async_p, to_supports_non_stop>: Use
TARGET_DEFAULT_RETURN.
<to_can_async_p, to_supports_non_stop, to_can_run>: Add comments.
(find_attach_target, find_run_target): Declare.
(target_create_inferior): Remove.
(target_has_execution_1): Update comment.
(target_supports_non_stop): Remove.
* target-delegates.c: Rebuild.
2014-03-12 Tom Tromey <tromey@redhat.com>
* gdb.base/corefile.exp (corefile_test_run, corefile_test_attach):
New procs. Add target-async tests.
* gdb.reverse/break-precsave.exp (precsave_tests): New proc.
Add target-async tests.
This patch does the conversion of to_xfer_partial from
LONGEST (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len);
to
enum target_xfer_status (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len, ULONGEST *xfered_len);
It changes to_xfer_partial return the transfer status and the transfered
length by *XFERED_LEN. Generally, the return status has three stats,
- TARGET_XFER_OK,
- TARGET_XFER_EOF,
- TARGET_XFER_E_XXXX,
See the comments to them in 'enum target_xfer_status'. Note that
Pedro suggested not name TARGET_XFER_DONE, as it is confusing,
compared with "TARGET_XFER_OK". We finally name it TARGET_XFER_EOF.
With this change, GDB core can handle unavailable data in a convenient
way.
The rationale behind this change was mentioned here
https://sourceware.org/ml/gdb-patches/2013-10/msg00761.html
Consider an object/value like this:
0 100 150 200 512
DDDDDDDDDDDxxxxxxxxxDDDDDD...DDIIIIIIIIIIII..III
where D is valid data, and xxx is unavailable data, and I is beyond
the end of the object (Invalid). Currently, if we start the
xfer at 0, requesting, say 512 bytes, we'll first get back 100 bytes.
The xfer machinery then retries fetching [100,512), and gets back
TARGET_XFER_E_UNAVAILABLE. That's sufficient when you're either
interested in either having the whole of the 512 bytes available,
or erroring out. But, in this scenario, we're interested in
the data at [150,512). The problem is that the last
TARGET_XFER_E_UNAVAILABLE gives us no indication where to
start the read next. We'd need something like:
get me [0,512) >>>
<<< here's [0,100), *xfered_len is 100, returns TARGET_XFER_OK
get me [100,512) >>> (**1)
<<< [100,150) is unavailable, *xfered_len is 50, return TARGET_XFER_E_UNAVAILABLE.
get me [150,512) >>>
<<< here's [150,200), *xfered_len is 50, return TARGET_XFER_OK.
get me [200,512) >>>
<<< no more data, return TARGET_XFER_EOF.
This naturally implies pushing down the decision of whether
to return TARGET_XFER_E_UNAVAILABLE or something else
down to the target. (Which kinds of leads back to tfile
itself reading from RO memory from file (though we could
export a function in exec.c for that that tfile delegates to,
instead of re-adding the old code).
Beside this change, we also add a macro TARGET_XFER_STATUS_ERROR_P to
check whether a status is an error or not, to stop using "status < 0".
This patch also eliminates the comparison between status and 0.
No target implementations to to_xfer_partial adapts this new
interface. The interface still behaves as before.
gdb:
2014-02-11 Yao Qi <yao@codesourcery.com>
* target.h (enum target_xfer_error): Rename to ...
(enum target_xfer_status): ... it. New. All users updated.
(enum target_xfer_status) <TARGET_XFER_OK>, <TARGET_XFER_EOF>:
New.
(TARGET_XFER_STATUS_ERROR_P): New macro.
(target_xfer_error_to_string): Remove declaration.
(target_xfer_status_to_string): Declare.
(target_xfer_partial_ftype): Adjust it.
(struct target_ops) <to_xfer_partial>: Return
target_xfer_status. Add argument xfered_len. Update
comments.
* target.c (target_xfer_error_to_string): Rename to ...
(target_xfer_status_to_string): ... it. New. All callers
updated.
(target_read_live_memory): Likewise. Call target_xfer_partial
instead of target_read.
(memory_xfer_live_readonly_partial): Return
target_xfer_status. Add argument xfered_len.
(raw_memory_xfer_partial): Likewise.
(memory_xfer_partial_1): Likewise.
(memory_xfer_partial): Likewise.
(target_xfer_partial): Likewise. Check *XFERED_LEN is set
properly. Update debug message.
(default_xfer_partial, current_xfer_partial): Likewise.
(target_write_partial): Likewise.
(target_read_partial): Likewise. All callers updated.
(read_whatever_is_readable): Likewise.
(target_write_with_progress): Likewise.
(target_read_alloc_1): Likewise.
* aix-thread.c (aix_thread_xfer_partial): Likewise.
* auxv.c (procfs_xfer_auxv): Likewise.
(ld_so_xfer_auxv, memory_xfer_auxv): Likewise.
* bfd-target.c (target_bfd_xfer_partial): Likewise.
* bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
* bsd-uthread.c (bsd_uthread_xfer_partia): Likewise.
* corefile.c (read_memory): Adjust.
* corelow.c (core_xfer_partial): Likewise.
* ctf.c (ctf_xfer_partial): Likewise.
* darwin-nat.c (darwin_read_dyld_info): Likewise. All callers
updated.
(darwin_xfer_partial): Likewise.
* exec.c (section_table_xfer_memory_partial): Likewise. All
callers updated.
(exec_xfer_partial): Likewise.
* exec.h (section_table_xfer_memory_partial): Update
declaration.
* gnu-nat.c (gnu_xfer_memory): Likewise. Assert 'res' is not
negative.
(gnu_xfer_partial): Likewise.
* ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise.
(ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise.
(ia64_hpux_xfer_solib_got): Likewise.
* inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. Change
type of 'partial_len' to ULONGEST.
* inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
* linux-nat.c (linux_xfer_siginfo ): Likewise.
(linux_nat_xfer_partial): Likewise.
(linux_proc_xfer_partial, linux_xfer_partial): Likewise.
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise.
* monitor.c (monitor_xfer_memory): Likewise.
(monitor_xfer_partial): Likewise.
* procfs.c (procfs_xfer_partial): Likewise.
* record-btrace.c (record_btrace_xfer_partial): Likewise.
* record-full.c (record_full_xfer_partial): Likewise.
(record_full_core_xfer_partial): Likewise.
* remote-sim.c (gdbsim_xfer_memory): Likewise.
(gdbsim_xfer_partial): Likewise.
* remote.c (remote_write_bytes_aux): Likewise. All callers
updated.
(remote_write_bytes, remote_read_bytes): Likewise. All
callers updated.
(remote_flash_erase): Likewise. All callers updated.
(remote_write_qxfer): Likewise. All callers updated.
(remote_read_qxfer): Likewise. All callers updated.
(remote_xfer_partial): Likewise.
* rs6000-nat.c (rs6000_xfer_partial): Likewise.
(rs6000_xfer_shared_libraries): Likewise.
* sol-thread.c (sol_thread_xfer_partial): Likewise.
(sol_thread_xfer_partial): Likewise.
* sparc-nat.c (sparc_xfer_wcookie): Likewise.
(sparc_xfer_partial): Likewise.
* spu-linux-nat.c (spu_proc_xfer_spu): Likewise. All callers
updated.
(spu_xfer_partial): Likewise.
* spu-multiarch.c (spu_xfer_partial): Likewise.
* tracepoint.c (tfile_xfer_partial): Likewise.
* windows-nat.c (windows_xfer_memory): Likewise.
(windows_xfer_shared_libraries): Likewise.
(windows_xfer_partial): Likewise.
* valprint.c: Replace 'target_xfer_error' with
'target_xfer_status' in comments.
When I verify my changes to target.h doesn't break build on aix, I get
the following build error on a clean GDB checkout.
../../binutils-gdb/gdb/aix-thread.c: In function 'pdc_read_regs':
../../binutils-gdb/gdb/aix-thread.c:366:4: error: passing argument 3 of 'ptrace32' makes integer from pointer without a cast [-Werror]
if (!ptrace32 (PTT_READ_GPRS, tid, gprs32, 0, NULL))
^
../../binutils-gdb/gdb/aix-thread.c:263:1: note: expected 'long long int' but argument is of type 'uint32_t *'
ptrace32 (int req, int id, addr_ptr addr, int data, int *buf)
^
../../binutils-gdb/gdb/aix-thread.c:375:42: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
if (!ptrace32 (PTT_READ_FPRS, tid, (addr_ptr) fprs, 0, NULL))
^
../../binutils-gdb/gdb/aix-thread.c:392:39: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
if (!ptrace32 (PTT_READ_SPRS, tid, (addr_ptr) &sprs32, 0, NULL))
GCC uses -maix32 in default, so the 'long long' is 64 bit and address
is 32 bit. Such warnings should go away if -maix64 is used.
In this patch, I cast the parameter to uintptr_t first, and then cast
to addr_ptr.
gdb:
2014-01-07 Yao Qi <yao@codesourcery.com>
Joel Brobecker <brobecker@adacore.com>
* aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t.
(pdc_write_regs): Likewise.
(fetch_regs_kernel_thread): Likewise.
(store_regs_kernel_thread): Likewise.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
This patch constifies the target_ops method to_detach.
This is a small cleanup, but also, I think, a bug-prevention fix,
since gdb already acts as if the "args" argument here was const.
In particular, top.c:quit_force calls kill_or_detach via
iterate_over_inferiors. kill_or_detach calls target_detach, passing
the same argument each time. So, if one of these methods was not
const-correct, then kill_or_detach would change its behavior in a
strange way.
I could not build every target I modified in this patch. I've
inspected them all by hand, though. Many targets do not use the
"args" parameter; a couple pass it to atoi; and a few pass it on to
the to_detach method of the target beneath. The only code that
required a real change was in linux-nat.c, and that only needed the
introduction of a temporary variable for const-correctness.
2013-11-08 Tom Tromey <tromey@redhat.com>
* aix-thread.c (aix_thread_detach): Update.
* corelow.c (core_detach): Update.
* darwin-nat.c (darwin_detach): Update.
* dec-thread.c (dec_thread_detach): Update.
* gnu-nat.c (gnu_detach): Update.
* go32-nat.c (go32_detach): Update.
* inf-ptrace.c (inf_ptrace_detach): Update.
* inf-ttrace.c (inf_ttrace_detach): Update.
* linux-fork.c (linux_fork_detach): Update.
* linux-fork.h (linux_fork_detach): Update.
* linux-nat.c (linux_nat_detach): Update. Introduce "tem"
local for const-correctness.
* linux-thread-db.c (thread_db_detach): Update.
* monitor.c (monitor_detach): Update.
* nto-procfs.c (procfs_detach): Update.
* procfs.c (procfs_detach): Update.
* record.c (record_detach): Update.
* record.h (record_detach): Update.
* remote-m32r-sdi.c (m32r_detach): Update.
* remote-mips.c (mips_detach): Update.
* remote-sim.c (gdbsim_detach): Update.
* remote.c (remote_detach_1, remote_detach)
(extended_remote_detach): Update.
* sol-thread.c (sol_thread_detach): Update.
* target.c (target_detach): Make "args" const.
(init_dummy_target): Update.
* target.h (struct target_ops) <to_detach>: Make argument const.
(target_detach): Likewise.
* windows-nat.c (windows_detach): Update.
This patch fixes a small typo after the BUILD_THREAD -> ptid_build
conversion.
gdb/ChangeLog:
* aix-thread.c (sync_threadlists): Add missing ')' in call
to ptid_build.
We're casting "addr" into "addr_ptr", but this variable is actually
a parameter with that very same type...
gdb/ChangeLog:
* aix-thread.c (ptrace32): Remove cast to addr_ptr.
Ulrich Weigand <uweigand@de.ibm.com>
* aixthread.c: Call ptrace64 instead of ptracex if defined.
Call ptrace64 instead of ptrace if defined.
Add macro addr_ptr to take care of ptrace address argument.
(pdc_read_regs): Likewise.
(pdc_write_regs): Likewise.
(aix_thread_resume): Likewise.
(fetch_regs_kernel_thread): Likewise.
(store_regs_kernel_thread): Likewise.
This removes a few more erroneous calls to add_target. These calls
end up installing the target in a user-visible way; but these targets
are all auto-activated and, I think, should never be explicitly
requested.
I have no way to test these.
* aix-thread.c (_initialize_aix_thread): Use
complete_target_initialization.
* bsd-uthread.c (_initialize_bsd_uthread): Use
complete_target_initialization.
* dec-thread.c (_initialize_dec_thread): Use
complete_target_initialization.
* ravenscar-thread.c (_initialize_ravenscar): Use
complete_target_initialization.
* sol-thread.c (_initialize_sol_thread): Use
complete_target_initialization.
* spu-multiarch.c (_initialize_spu_multiarch): Use
complete_target_initialization.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
This is a minor cleanup that makes supply_fprs more consistent with
how fill_fprs was written.
gdb/ChangeLog:
* aix-thread.c (supply_fprs): Make more consistent with fill_fprs.
gdb/
2012-03-08 Chris January <chris.january@allinea.com>
* aix-thread.c (fill_sprs): Store the floating point registers
at the correct offsets into vals.
On newer versions of AIX (6.x and later), this function is actually
declared in procinfo.h, thus causing a compilation warning when we
re-declare it ourselves. This patch adds a configure check for that
function allowing us to declare the function only if the declaration
isn't already present in one of procinfo system header.
gdb/ChangeLog:
PR gdb/12116:
* configure.ac: Add getthrds declaration check.
* configure, config.in: Regenerate.
* aix-thread.c (getthrds): Declare only if not already declared
in procinfo.h. More declaration out of get_signaled_thread to
global scope.
John Baldwin
Tom Tromey
Simon Marchi
Pedro Alves
Simon Marchi
Joel Brobecker
Gary Benson
Tom Tromey
Yao Qi
Markus Metzger
Joel Brobecker
Luis Machado
Ulrich Weigand
Michael Snyder
Pierre Muller