Changes in v4:
- Replaced phex call with hex_string.
Changes in v3:
- Addressed comments by Pedro.
- Output of memory region size now in hex format.
- Misc formatting fixups.
- Addressed Simon's comments on formatting.
- Adjusted command text in the manual entry.
- Fixed up ChangeLog.
- Renamed flash_erase_all_command to flash_erase_command.
Changes in v2:
- Added NEWS entry.
- Fixed long lines.
- Address printing with paddress.
Years ago we contributed flash programming patches upstream. The following
patch is a leftover one that complements that functionality by adding a new
command to erase all reported flash memory blocks.
The command is most useful when we're dealing with flash-enabled targets
(mostly bare-metal) and we need to reset the board for some reason.
The wiping out of flash memory regions should help the target come up with a
known clean state from which the user can load a new image and resume
debugging. It is convenient enough to do this from the debugger, and there is
also an MI command to expose this functionality to the IDE's.
gdb/doc/ChangeLog:
2017-01-20 Mike Wrighton <mike_wrighton@codesourcery.com>
Luis Machado <lgustavo@codesourcery.com>
* gdb.texinfo (-target-flash-erase): New MI command description.
(flash-erase): New CLI command description.
gdb/ChangeLog:
2017-01-20 Mike Wrighton <mike_wrighton@codesourcery.com>
Luis Machado <lgustavo@codesourcery.com>
* NEWS (New commands): Mention flash-erase.
(New MI commands): Mention target-flash-erase.
* mi/mi-cmds.c (mi_cmd_target_flash_erase): Add target-flash-erase MI
command.
* mi/mi-cmds.h (mi_cmd_target_flash_erase): New declaration.
* mi/mi-main.c (mi_cmd_target_flash_erase): New function.
* target.c (flash_erase_command): New function.
(initialize_targets): Add new flash-erase command.
* target.h (flash_erase_command): New declaration.
This has been tested for the n64 and o32 ABIs. Signal frame unwinders for
both ABIs are provided. FreeBSD/mips requires custom linkmap offsets since
it contains an additional l_off member in 'struct link_map' that other
FreeBSD platforms do not have. Support for collecting and supplying
general purpose and floating point register sets are provided. Common
routines for working with native format register sets are exported for
use by the native target.
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Add mips-fbsd-tdep.o.
(ALLDEPFILES): Add mips-fbsd-tdep.c.
* NEWS: Mention new FreeBSD/mips target.
* configure.tgt: Add mips*-*-freebsd*.
* mips-fbsd-tdep.c: New file.
* mips-fbsd-tdep.h: New file.
gdb/doc/ChangeLog:
* gdb.texinfo (Contributors): Add SRI International and University
of Cambridge for FreeBSD/mips.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
New in v2:
- A few adjustments / simplifications were possible now that we
require C++11:
. Use std::unique_ptr to make the user_args_stack std::vector own
its elements:
static std::vector<std::unique_ptr<user_args>> user_args_stack;
. use vector::emplace_back to construct elements directly in the
corresponding vectors.
. use std::to_string instead of adding a gdb::to_string
replacement.
- Now includes a test.
Docs/NEWS are unchanged from v1 and have already been approved.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I recently wrote a user-defined command that could benefit from
supporting an unlimited number of arguments:
http://palves.net/list-active-signal-handlers-with-gdb/
E.g., 'info signal-dispositions 1 2 3 4 5 6 7 8 9 10 11'
However, we currently only support up to 10 arguments passed to
user-defined commands ($arg0..$arg9).
I can't find a good reason for that, other than "old code with hard
coded limits". This patch removes that limit and modernizes the code
along the way:
- Makes the user_args struct a real C++ class that uses std::vector
for storage.
- Removes the "next" pointer from within user_args and uses a
std::vector to maintain a stack instead.
- Adds a new RAII-based scoped_user_args_level class to help
push/pop user args in the stack instead of using a cleanup.
gdb/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
* NEWS: Mention that user commands now accept an unlimited number
of arguments.
* cli/cli-script.c: Include <vector>.
(struct string_view): New type.
(MAXUSERARGS): Delete.
(struct user_args): Now a C++ class.
(user_args_stack): New.
(struct scoped_user_args_level): New type.
(execute_user_command): Use scoped_user_args_level.
(arg_cleanup): Delete.
(setup_user_args): Deleted, and refactored as ...
(user_args::user_args): ... this new constructor. Limit of number
of arguments removed.
(insert_user_defined_cmd_args): Defer to user_args_stack.
(user_args::insert_args): New, bits based on old
insert_user_defined_cmd_args with limit of number of arguments
eliminated.
gdb/doc/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
* gdb.texinfo (User-defined Commands): Limit on number of
arguments passed to user-defined commands removed; update.
gdb/testsuite/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
* gdb.base/commands.exp (user_defined_command_manyargs_test): New
procedure.
(top level): Call it.
It'd be handy to be able to iterate over command arguments in
user-defined commands, in order to support optional arguments
($arg0..$argN).
I thought I could make it work with "eval", but alas, it doesn't work
currently. E.g., with:
define test
set $i = 0
while $i < $argc
eval "print $arg%d", $i
set $i = $i + 1
end
end
we get:
(gdb) test 1
$1 = void
(gdb) test 1 2 3
$2 = void
$3 = void
$4 = void
(gdb)
The problem is that "eval" doesn't do user-defined command arguments
substitution after expanding its own argument. This patch fixes that,
which makes the example above work:
(gdb) test 1
$1 = 1
(gdb) test 1 2 3
$2 = 1
$3 = 2
$4 = 3
(gdb)
New test included, similar the above, but also exercises expanding
$argc.
I think this is likely to simplify many scripts out there, so I'm
adding an example to the manual and mentioning it in NEWS as well.
gdb/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
PR cli/20559
* NEWS: Mention "eval" expands user-defined command arguments.
* cli/cli-script.c (execute_control_command): Adjust to rename.
(insert_args): Rename to ...
(insert_user_defined_cmd_args): ... this, and make extern.
* cli/cli-script.h (insert_user_defined_cmd_args): New
declaration.
* printcmd.c: Include "cli/cli-script.h".
(eval_command): Call insert_user_defined_cmd_args.
gdb/doc/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
PR cli/20559
* gdb.texinfo (Define): Add example of using "eval" to process a
variable number of arguments.
(Output) <eval>: Add anchor.
gdb/testsuite/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
PR cli/20559
* gdb.base/commands.exp (user_defined_command_args_eval): New
procedure.
(top level): Call it.
Since we don't use suffix rules nor implicit rules in gdb, we can
disable them. The advantage is a slightly faster make [1].
Here are some numbers about the speedup. I ran this on my trusty old
Intel Q6600, so the time numbers are probably higher than what you'd get
on any recent hardware. I ran "make" in the gdb/ directory of an
already built repository (configured with --enable-targets=all). I
recorded the time of execution (average of 5). I then ran "make -d" and
recorded the number of printed lines, which gives a rough idea of the
number of operations done.
I compared the following configurations, to see the impact of both the
empty .SUFFIXES target and the empty pattern rules, as well as running
"make -r", which can be considered the "ideal" case.
A - baseline
B - baseline + .SUFFIXES
C - baseline + pattern rules
D - baseline + .SUFFIXES + pattern rules
E - baseline + make -r
config | time (s) | "make -d"
-----------------------------
A | 5.74 | 2396643
B | 1.19 | 298469
C | 2.81 | 1266573
D | 1.13 | 245489
E | 1.01 | 163914
We can see that the empty .SUFFIXES target has a bigger impact than the
empty pattern rules, but still it doesn't hurt to disable the implicit
pattern rules as well.
There are still some mentions of implicit rules I can't get rid of in
the "make -d" output. For example, it's trying to build .c files from
.w files:
Looking for an implicit rule for '/home/simark/src/binutils-gdb/gdb/infrun.c'.
Trying pattern rule with stem 'infrun'.
Trying implicit prerequisite '/home/simark/src/binutils-gdb/gdb/infrun.w'.
and trying to build Makefile.in from a bunch of extensions:
Looking for an implicit rule for 'Makefile.in'.
Trying pattern rule with stem 'Makefile.in'.
Trying implicit prerequisite 'Makefile.in.o'.
Trying pattern rule with stem 'Makefile.in'.
Trying implicit prerequisite 'Makefile.in.c'.
Trying pattern rule with stem 'Makefile.in'.
Trying implicit prerequisite 'Makefile.in.cc'.
... many more ...
If somebody knows how to disable them, we can do it, but at this point
the returns are minimal, so it is not that important.
I verified that both in-tree and out-of-tree builds work.
[1] Switching from explicit rules to pattern rules for files in
subdirectories actually made it slower, so this is kind of a way to
redeem myself. But it the end it's faster than it was previously,
so it was all worth it. :)
gdb/ChangeLog:
* disable-implicit-rules.mk: New file.
* Makefile.in: Include disable-implicit-rules.mk.
* data-directory/Makefile.in: Likewise.
* gnulib/Makefile.in: Likewise.
gdb/doc/ChangeLog:
* Makefile.in: Likewise.
gdb/gdbserver/ChangeLog:
* Makefile.in: Include disable-implicit-rules.mk.
gdb/testsuite/ChangeLog:
* Makefile.in: Include disable-implicit-rules.mk.
Discussion with qemu folks suggests that the vCont description could
be even simpler and clearer. Given we now say:
For each inferior thread, the leftmost action with a matching
thread-id is applied.
There's really no need to even talk about "default" actions, which
raises doubts about whether "default" is special in some way (it's
not).
See <https://lists.gnu.org/archive/html/qemu-devel/2016-10/msg06944.html>.
gdb/doc/ChangeLog:
2016-10-29 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Packets) <vCont>: Remove mention of default
actions.
Specifically, what happens with multiple actions that could match a
thread, and what happens when we get a vCont action that matches a
thread that was already running. E.g., what does:
"vCont;s:2"
"vCont;s:1;c"
mean for thread 2.
(Thread 2 continues stepping.)
gdb/doc/ChangeLog:
2016-10-26 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Packets): Clarify vCont packets with multiple
actions that match a thread, and what happens when an action
matches a thread that is already running.
The -trace-save MI command supports saving the trace in the CTF format,
as its CLI counterpart, but it's not documented.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Tracepoint Commands): Document -ctf switch
of -trace-save.
Newer gdbservers may be talking to older gdbs,
and older gdbs will flag a missing "end" as an error.
So just make "end" required again, and for compatibility
change the default field type to "bool".
gdb/ChangeLog:
2016-10-06 Doug Evans <dje@google.com>
* features/aarch64-core.xml (cpsr_flags): Elide "type" and specify
"end" in all fields.
* features/aarch64.c: Regenerate.
* features/i386/32bit-mpx.xml (_bndcfgu): Specify type of "preserved"
and "enabled" fields. Correct size of "enabled" field.
* features/i386/64bit-mpx.xml (_bndcfgu): Specify type of "preserved"
and "enabled" fields.
* features/i386/i386-avx-mpx-linux.c: Regenerate.
* features/i386/i386-avx-mpx.c: Regenerate.
* features/i386/i386-avx512-linux.c: Regenerate.
* features/i386/i386-avx512.c: Regenerate.
* features/i386/i386-mpx-linux.c: Regenerate.
* features/i386/i386-mpx.c: Regenerate.
* features/arc-arcompact.c: Regenerate.
* features/arc-v2.c: Regenerate.
* xml-tdesc.c (tdesc_start_field): Require "end" spec. Single bit
fields default to "bool" type.
Revert 2016-03-15 Doug Evans <dje@google.com>
* features/i386/32bit-core.xml (i386_eflags): Remove "end" spec.
* features/i386/32bit-sse.xml (i386_eflags): Ditto.
* features/i386/64bit-core.xml (i386_eflags): Ditto.
* features/i386/64bit-sse.xml (i386_eflags): Ditto.
* features/i386/x32-core.xml (i386_eflags): Ditto.
gdb/doc/ChangeLog:
2016-10-06 Doug Evans <dje@google.com>
* gdb.texinfo (Target Description Format): Update docs on "end"
field spec and field default type.
gdb/testsuite/ChangeLog:
2016-10-06 Doug Evans <dje@google.com>
* gdb.xml/extra-regs.xml: Update, end field now required, default type
for single bitfields is bool.
* gdb.xml/tdesc-regs.exp: Ditto.
With this patch, when an inferior, thread or frame is explicitly
selected by the user, notifications will appear on all CLI and MI UIs.
When a GDB console is integrated in a front-end, this allows the
front-end to follow a selection made by the user ont he CLI, and it
informs the user about selection changes made behind the scenes by the
front-end.
This patch addresses PR gdb/20487.
In order to communicate frame changes to the front-end, this patch adds
a new field to the =thread-selected event for the selected frame. The
idea is that since inferior/thread/frame can be seen as a composition,
it makes sense to send them together in the same event. The vision
would be to eventually send the inferior information as well, if we find
that it's needed, although the "=thread-selected" event would be
ill-named for that job.
Front-ends need to handle this new field if they want to follow the
frame selection changes that originate from the console. The format of
the frame attribute is the same as what is found in the *stopped events.
Here's a detailed example for each command and the events they generate:
thread
------
1. CLI command:
thread 1.3
MI event:
=thread-selected,id="3",frame={...}
2. MI command:
-thread-select 3
CLI event:
[Switching to thread 1.3 ...]
3. MI command (CLI-in-MI):
thread 1.3
MI event/reply:
&"thread 1.3\n"
~"#0 child_sub_function () ...
=thread-selected,id="3",frame={level="0",...}
^done
frame
-----
1. CLI command:
frame 1
MI event:
=thread-selected,id="3",frame={level="1",...}
2. MI command:
-stack-select-frame 1
CLI event:
#1 0x00000000004007f0 in child_function...
3. MI command (CLI-in-MI):
frame 1
MI event/reply:
&"frame 1\n"
~"#1 0x00000000004007f9 in ..."
=thread-selected,id="3",frame={level="1"...}
^done
inferior
--------
Inferior selection events only go from the console to MI, since there's
no way to select the inferior in pure MI.
1. CLI command:
inferior 2
MI event:
=thread-selected,id="3"
Note that if the user selects an inferior that is not started or exited,
the MI doesn't receive a notification. Since there is no threads to
select, the =thread-selected event does not apply...
2. MI command (CLI-in-MI):
inferior 2
MI event/reply:
&"inferior 2\n"
~"[Switching to inferior 2 ...]"
=thread-selected,id="4",frame={level="0"...}
^done
Internal implementation detail: this patch makes it possible to suppress
notifications caused by a CLI command, like what is done in mi-interp.c.
This means that it's now possible to use the
add_com_suppress_notification function to register a command with some
event suppressed. It is used to implement the select-frame command in
this patch.
The function command_notifies_uscc_observer was added to extract
the rather complicated logical expression from the if statement. It is
also now clearer what that logic does: if the command used by the user
already notifies the user_selected_context_changed observer, there is
not need to notify it again. It therefore protects again emitting the
event twice.
No regressions, tested on ubuntu 14.04 x86 with target boards unix and
native-extended-gdbserver.
gdb/ChangeLog:
YYYY-MM-DD Antoine Tremblay <antoine.tremblay@ericsson.com>
YYYY-MM-DD Simon Marchi <simon.marchi@ericsson.com>
PR gdb/20487
* NEWS: Mention new frame field of =thread-selected event.
* cli/cli-decode.c (add_cmd): Initialize c->suppress_notification.
(add_com_suppress_notification): New function definition.
(cmd_func): Set and restore the suppress_notification flag.
* cli/cli-deicode.h (struct cmd_list_element)
<suppress_notification>: New field.
* cli/cli-interp.c (cli_suppress_notification): New global variable.
(cli_on_user_selected_context_changed): New function.
(_initialize_cli_interp): Attach to user_selected_context_changed
observer.
* command.h (struct cli_suppress_notification): New structure.
(cli_suppress_notification): New global variable declaration.
(add_com_suppress_notification): New function declaration.
* defs.h (enum user_selected_what_flag): New enum.
(user_selected_what): New enum flag type.
* frame.h (print_stack_frame_to_uiout): New function declaration.
* gdbthread.h (print_selected_thread_frame): New function declaration.
* inferior.c (print_selected_inferior): New function definition.
(inferior_command): Remove printing of inferior/thread/frame switch
notifications, notify user_selected_context_changed observer.
* inferior.h (print_selected_inferior): New function declaration.
* mi/mi-cmds.c (struct mi_cmd): Add user_selected_context
suppression to stack-select-frame and thread-select commands.
* mi/mi-interp.c (struct mi_suppress_notification)
<user_selected_context>: Initialize.
(mi_user_selected_context_changed): New function definition.
(_initialize_mi_interp): Attach to user_selected_context_changed.
* mi/mi-main.c (mi_cmd_thread_select): Print thread selection reply.
(mi_execute_command): Handle notification suppression. Notify
user_selected_context_changed observer on thread change instead of printing
event directly. Don't send it if command already sends the notification.
(command_notifies_uscc_observer): New function.
(mi_cmd_execute): Don't handle notification suppression.
* mi/mi-main.h (struct mi_suppress_notification)
<user_selected_context>: New field.
* stack.c (print_stack_frame_to_uiout): New function definition.
(select_frame_command): Notify user_selected_context_changed
observer.
(frame_command): Call print_selected_thread_frame if there's no frame
change or notify user_selected_context_changed observer if there is.
(up_command): Notify user_selected_context_changed observer.
(down_command): Likewise.
(_initialize_stack): Suppress user_selected_context notification for
command select-frame.
* thread.c (thread_command): Notify
user_selected_context_changed if the thread has changed, print
thread info directly if it hasn't.
(do_captured_thread_select): Do not print thread switch event.
(print_selected_thread_frame): New function definition.
* tui/tui-interp.c (tui_on_user_selected_context_changed):
New function definition.
(_initialize_tui_interp): Attach to user_selected_context_changed
observer.
gdb/doc/ChangeLog:
PR gdb/20487
* gdb.texinfo (Context management): Update mention of frame
change notifications.
(gdb/mi Async Records): Document frame field in
=thread-select event.
* observer.texi (GDB Observers): New user_selected_context_changed
observer.
gdb/testsuite/ChangeLog:
PR gdb/20487
* gdb.mi/mi-pthreads.exp (check_mi_thread_command_set): Adapt
=thread-select-event check.
I was reading the gdb RSP manual recently and I found a number of
small problems in the documentation. This patch attempts to improve
these areas. Specfically:
* The term "memory breakpoint" is used only in this section of the
manual, and there inconsistently. I found this term confusing --
initially I thought it might be a watchpoint. This patch changes it
to use the term "software breakpoint", which is used in the rest of
the manual.
* The z0 packet didn't document how "kind" was written. And, it had a
stray link to the architecture-specific protocol details node. This
patch moves this link to a better spot.
* The z1 patch didn't document that it accepts cmd_list.
* I couldn't find any text saying what response is given to a command
like vCont in non-stop mode. The answer is that OK is sent, and
then a stop reply is sent as a notification. This patch adds a note
about this.
* The "create" stop reply did not document that the "R" argument is
ignored.
* The "W", "X", and "w" packets did not document how the "AA" part is
formatted.
* The %Stop notification example said "%%Stop", but I think this is
incorrect.
2016-09-28 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Packets) <z0>: Use "software breakpoint" rather
than "memory breakpoint". Further document "kind". Move
protocol-details link earlier.
<z1>: Document the cmd_list argument. Fix typo.
<g>: Remove incorrect sentence.
(Stop Reply Packets): Document "OK" response to requests when in
non-stop mode.
<swbreak>: Use "software breakpoint" rather than "memory
breakpoint".
<create>: Document that "R" is ignored.
<W, X, w>: Document formatting of "AA".
(Notification Packets): Use "%Stop", not "%%Stop".
ARC is a family of licensable processors developed by Synopsys.
This is an initial patch that doesn't yet support some of the features, that
are already available in Synopsys' fork of GDB, namely:
* longjmp support
* signal frame handling
* prologue analysis
* Linux targets support
* native Linux support
ARC cores are configurable and extensible, which means from debugger
perspective that some registers and debug capabilities are optional, therefore
it is up to the GDB stub to determine exact list of register available on
target and supply it to GDB via XML target descriptions. List of registers
that is known to GDB and is required is intentionally kept small to simplify
requirements to GDB stub and implementation of a GDB client.
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Add arc-tdep.o.
(HFILES_NO_SRCDIR): Add arc-tdep.h.
(ALLDEPFILES): Add arc-tdep.c.
* NEWS: Mention new ARC port.
* configure.tgt: Add ARC.
* arc-tdep.c: New file.
* arc-tdep.h: New file.
* features/Makefile (XMLTOC): Add arc-v2.xml and arc-arcompact.xml.
* features/arc-v2.xml: New file.
* features/arc-v2.c: New file (generated).
* features/arc-arcompact.xml: New file.
* features/arc-arcompact.c: New file (generated).
gdb/doc/ChangeLog:
* gdb.texinfo (Embedded Processors): Document ARC.
(Synopsys ARC): New section.
(Standard Target Features): Document ARC features.
(ARC Features): New section.
gdb/testsuite/ChangeLog:
* gdb.xml/tdesc-regs.exp: set core-regs for arc*-*-elf32.
This patch adds a bunch of generated files to gdb's gitignore files.
There are still a bunch of "stamp" files that are not ignored, but I
think the rule for them should be put in the top-level gitignore.
Users and developers are encouraged to build out-of-tree, but some
people prefer the simplicity to build in-tree, so it should be useful
for them.
gdb/ChangeLog:
* .gitignore: Ignore more files.
* data-directory/.gitignore: Likewise.
gdb/doc/ChangeLog:
* .gitignore: New file.
gdb/gdbserver/ChangeLog:
* .gitinore: Ignore more files.
gdb/testsuite/ChangeLog:
* .gitignore: New file.
This patch allows the user to set the inferior-tty to "empty", in order
to come back to the default behaviour of using the same tty as gdb is
using.
This is already supported in MI (and tested in gdb.mi/mi-basics.exp).
I added a new test, set-inferior-tty.exp, where I test only the setting
and unsetting of the parameter. It would be nice to actually test that
the inferior output properly goes to the separate tty, but that will be
for another day.
gdb/ChangeLog:
* infcmd.c (set_inferior_io_terminal): Set inferior terminal to
NULL if terminal_name is an empty string.
(_initialize_infcmd): Make the argument of "set inferior-tty"
optional, mention it in the help doc.
gdb/doc/ChangeLog:
* gdb.texinfo (Input/Output): Mention possibility to unset
inferior-tty.
gdb/testsuite/ChangeLog:
* gdb.base/set-inferior-tty.exp: New file.
* gdb.base/set-inferior-tty.c: New file.
This patch allows gdbserver to continue recording after disconnect. On
reconnect, the recorded data is accessible to gdb as if no disconnect happened.
A possible application for this feature is remotely examine bugs that occur
at irregular intervals, where maintaining a gdb connection is inconvenient.
This also fixes the issue mentioned here:
https://sourceware.org/ml/gdb-patches/2015-11/msg00424.html
Signed-off-by: Tim Wiederhake <tim.wiederhake@intel.com>
gdb/ChangeLog:
* NEWS: Resume btrace on reconnect.
* record-btrace.c: Added record-btrace.h include.
(record_btrace_open): Split into this and ...
(record_btrace_push_target): ... this.
(record_btrace_disconnect): New function.
(init_record_btrace_ops): Use record_btrace_disconnect.
* record-btrace.h: New file.
* remote.c: Added record-btrace.h include.
(remote_start_remote): Check recording status.
(remote_btrace_maybe_reopen): New function.
gdb/doc/ChangeLog:
* gdb.texinfo: Resume btrace on reconnect.
gdb/testsuite/ChangeLog:
* gdb.btrace/reconnect.c: New file.
* gdb.btrace/reconnect.exp: New file.
Change-Id: I95e8b0ab8a89e58591aba0e63818cee82fd211bc
Implement support to add catchpoints for a group of related syscalls
using the syntax:
(gdb) catch syscall group:<group>
or
(gdb) catch syscall g:<group>
Several groups are predefined in the xml files for all architectures
supported by GDB over Linux. They are based on the groups defined by
strace.
gdb/
* xml-syscall.c (get_syscalls_by_group): New.
(get_syscall_group_names): New.
(struct syscall_group_desc): New structure to store group data.
(struct syscalls_info): Include field to store the group list.
(sysinfo_free_syscall_group_desc): New.
(free_syscalls_info): Free group list.
(syscall_group_create_syscall_group_desc): New.
(syscall_group_add_syscall): New.
(syscall_create_syscall_desc): Add syscall to its groups.
(syscall_start_syscall): Load group attribute.
(syscall_group_get_group_by_name): New.
(xml_list_syscalls_by_group): New.
(xml_list_of_groups): New.
* xml-syscall.h (get_syscalls_by_group): Export function
to retrieve a list of syscalls filtered by the group name.
(get_syscall_group_names): Export function to retrieve the list
of syscall groups.
* break-catch-syscall.c (catch_syscall_split_args): Verify if
argument is a syscall group and expand it to a list of syscalls
when creating catchpoints.
(catch_syscall_completer): Add word completion for system call
groups.
* configure.ac: Include dependency for xsltproc when building
in maintainer-mode.
* break-catch-syscall.c (_initialize_breakpoint): Update catch
syscall command documentation.
* NEWS: Include section about catching groups of syscalls.
* configure: Regenerate.
* data-directory/Makefile.in: Generate syscall xml when building
in maintainer mode.
* syscalls/gdb-syscalls.dtd: Include group attribute to the
syscall element.
* syscalls/apply-defaults.xsl: New.
* syscalls/linux-defaults.xml.in: New.
* syscalls/aarch64-linux.xml: Rename to aarch64-linux.xml.in.
* syscalls/amd64-linux.xml: Rename to amd64-linux.xml.in.
* syscalls/arm-linux.xml: Rename to arm-linux.xml.in.
* syscalls/bfin-linux.xml: Rename to bfin-linux.xml.in.
* syscalls/i386-linux.xml: Rename to i386-linux.xml.in.
* syscalls/mips-n32-linux.xml: Rename to mips-n32-linux.xml.in.
* syscalls/mips-n64-linux.xml: Rename to mips-n64-linux.xml.in.
* syscalls/mips-o32-linux.xml: Rename to mips-o32-linux.xml.in.
* syscalls/ppc-linux.xml: Rename to ppc-linux.xml.in.
* syscalls/ppc64-linux.xml: Rename to ppc64-linux.xml.in.
* syscalls/s390-linux.xml: Rename to s390-linux.xml.in.
* syscalls/s390x-linux.xml: Rename to s390x-linux.xml.in.
* syscalls/sparc-linux.xml: Rename to sparc-linux.xml.in.
* syscalls/sparc64-linux.xml: Rename to sparc64-linux.xml.in.
* syscalls/aarch64-linux.xml: Regenerate.
* syscalls/amd64-linux.xml: Regenerate.
* syscalls/arm-linux.xml: Regenerate.
* syscalls/i386-linux.xml: Regenerate.
* syscalls/mips-n32-linux.xml: Regenerate.
* syscalls/mips-n64-linux.xml: Regenerate.
* syscalls/mips-o32-linux.xml: Regenerate.
* syscalls/ppc-linux.xml: Regenerate.
* syscalls/ppc64-linux.xml: Regenerate.
* syscalls/s390-linux.xml: Regenerate.
* syscalls/s390x-linux.xml: Regenerate.
* syscalls/sparc-linux.xml: Regenerate.
* syscalls/sparc64-linux.xml: Regenerate.
gdb/testsuite/
* gdb.base/catch-syscall.exp (do_syscall_tests): Add call
to test_catch_syscall_group.
(test_catch_syscall_group): New.
gdb/doc/
* gdb.texinfo (Set Catchpoints): Add 'group' argument to catch
syscall.
This patch adds some breakpoint events to Python. In particular,
there is a creation event that is emitted when a breakpoint is
created; a modification event that is emitted when a breakpoint
changes somehow; and a deletion event that is emitted when a
breakpoint is deleted.
In this patch, the event's payload is the breakpoint itself. I
considered making a new event type to hold the breakpoint, but I
didn't see a need. Still, I thought I would mention this as a spot
where some other choice is possible.
Built and regtested on x86-64 Fedora 23.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/15620, PR python/18620:
* python/py-evts.c (gdbpy_initialize_py_events): Call
add_new_registry for new events.
* python/py-events.h (events_object) <breakpoint_created,
breakpoint_deleted, breakpoint_modified>: New fields.
* python/py-breakpoint.c (gdbpy_breakpoint_created): Emit the
breakpoint changed event.
(gdbpy_breakpoint_deleted): Emit the breakpoint deleted event.
(gdbpy_breakpoint_modified): New function.
(gdbpy_initialize_breakpoints): Attach to the breakpoint modified
observer.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/15620, PR python/18620:
* python.texi (Events In Python): Document new breakpoint events.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/15620, PR python/18620:
* gdb.python/py-breakpoint.exp (connect_event, check_last_event)
(test_bkpt_events): New procs.
This patch adds a "pending" attribute to gdb.Breakpoint.
Built and regtested on x86-64 Fedora 23.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/17698:
* NEWS: Update.
* python/py-breakpoint.c (bppy_get_pending): New function.
(breakpoint_object_getset): Add entry for "pending".
* breakpoint.h (pending_breakpoint_p): Declare.
* breakpoint.c (pending_breakpoint_p): New function.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/17698:
* python.texi (Breakpoints In Python): Document
Breakpoint.pending.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/17698:
* gdb.python/py-breakpoint.exp (test_bkpt_basic): Add "pending"
test.
(test_watchpoints): Likewise.
(test_bkpt_pending): New proc.
I noticed that the Python breakpoint documentation was ordered a bit
oddly. It documented the constructor; then the stop method; then the
watchpoint constants (used for the constructor); then various other
methods and attributes; then the other constants used by the
constructor; and then finally some more methods and attributes.
This patch rearranges the node a little to move the constants to just
after the constructor and before the other methods and attributes.
2016-07-13 Tom Tromey <tom@tromey.com>
* python.texi (Breakpoints In Python): Move table of types and
table of watchpoint types earlier in node.
PR python/19293 notes that when a Python unwinder is disabled, the
frame cache is not invalidated. This means that disabling an unwinder
doesn't have any immediate effect -- but in my experience it's often
the case that I want to enable or disable an unwinder in order to see
what happens.
This patch adds a new gdb.invalidate_cached_frames function and
arranges for the relevant bits of library code to call it. I've only
partially documented this function, considering a warning sufficient
without going into all the reasons ordinary code should not call it.
The name of the new function was taken from a comment in frame.h next
to reinit_frame_cache.
No new test as I think the updates to the existing test are sufficient
to show that the code is working as intended.
Built and regtested on x86-64 Fedora 23.
2016-07-12 Tom Tromey <tom@tromey.com>
PR python/19293:
* python/lib/gdb/command/unwinders.py (do_enable_unwinder): Call
gdb.invalidate_cached_frames.
* python/lib/gdb/unwinder.py (register_unwinder): Call
gdb.invalidate_cached_frames.
* python/python.c (gdbpy_invalidate_cached_frames): New function.
(python_GdbMethods): Add entry for invalidate_cached_frames.
2016-07-12 Tom Tromey <tom@tromey.com>
PR python/19293:
* python.texi (Frames In Python): Document
gdb.invalidate_cached_frames.
2016-07-12 Tom Tromey <tom@tromey.com>
PR python/19293:
* gdb.python/py-unwind-maint.exp: Update tests.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* NEWS: Mention support for running interpreters on separate
UIs and the new new-ui command.
gdb/doc/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Interpreters): Update intepreter-exec section,
document new-ui and explain use case.
This change adds support for specifying a negative repeat count to
all the formats of the 'x' command to examine memory backward.
A new testcase 'examine-backward' is added to cover this new feature.
Here's the example output from the new feature:
<format 'i'>
(gdb) bt
#0 Func1 (n=42, p=0x40432e "hogehoge") at main.cpp:5
#1 0x00000000004041fa in main (argc=1, argv=0x7fffffffdff8) at main.cpp:19
(gdb) x/-4i 0x4041fa
0x4041e5 <main(int, char**)+11>: mov %rsi,-0x10(%rbp)
0x4041e9 <main(int, char**)+15>: lea 0x13e(%rip),%rsi
0x4041f0 <main(int, char**)+22>: mov $0x2a,%edi
0x4041f5 <main(int, char**)+27>: callq 0x404147
<format 'x'>
(gdb) x/-4xw 0x404200
0x4041f0 <main(int, char**)+22>: 0x00002abf 0xff4de800 0x76e8ffff 0xb8ffffff
(gdb) x/-4
0x4041e0 <main(int, char**)+6>: 0x7d8910ec 0x758948fc 0x358d48f0 0x0000013e
gdb/ChangeLog:
* NEWS: Mention that GDB now supports a negative repeat count in
the 'x' command.
* printcmd.c (decode_format): Allow '-' in the parameter
"string_ptr" to accept a negative repeat count.
(find_instruction_backward): New function.
(read_memory_backward): New function.
(integer_is_zero): New function.
(find_string_backward): New function.
(do_examine): Use new functions to examine memory backward.
(_initialize_printcmd): Mention that 'x' command supports a negative
repeat count.
gdb/doc/ChangeLog:
* gdb.texinfo (Examining Memory): Document negative repeat
count in the 'x' command.
gdb/testsuite/ChangeLog:
* gdb.base/examine-backward.c: New file.
* gdb.base/examine-backward.exp: New file.
Eclipse CDT now supports enabling execution recording using two methods
(full and btrace) and both formats for btrace (bts and pt). In the
event that recording is enabled behind the back of the GUI (by the user
on the command line, or a script), we need to know which method/format
are being used, so it can be correctly reflected in the interface. This
patch adds this information to the =record-started async record.
Before:
=record-started,thread-group="i1"
After:
=record-started,thread-group="i1",method="btrace",format="bts"
=record-started,thread-group="i1",method="btrace",format="pt"
=record-started,thread-group="i1",method="full"
The "format" field is only present when the current method supports
multiple formats (only the btrace method as of now).
gdb/ChangeLog:
* NEWS: Mention the new fields in =record-started.
* common/btrace-common.h (btrace_format_short_string): New function
declaration.
* common/btrace-common.c (btrace_format_short_string): New
function.
* mi/mi-interp.c (mi_record_changed): Output method and format
fields in the =record-started record.
* record-btrace.c (record_btrace_open): Adapt record_changed
notification.
* record-full.c (record_full_open): Likewise.
* record.c (cmd_record_stop): Likewise.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Async Records): Document method and
format fields in =record-started.
* observer.texi (record_changed): Add method and format
parameters.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-record-changed.exp: Adjust =record-started output
matching.
gdb/doc/ChangeLog:
* gdb.texinfo (General Query Packets): Move the description of the
response before the long list of the specific 'read' and 'write'
requests.
PR python/17981 notes that gdb.breakpoints() returns None when there
are no breakpoints; whereas an empty list or tuple would be more in
keeping with Python and the documentation.
This patch fixes the bug by changing the no-breakpoint return to make
an empty tuple.
Built and regtested on x86-64 Fedora 23.
2016-05-23 Tom Tromey <tom@tromey.com>
PR python/17981:
* python/py-breakpoint.c (gdbpy_breakpoints): Return a new tuple
when there are no breakpoints.
2016-05-23 Tom Tromey <tom@tromey.com>
* python.texi (Basic Python): Document gdb.breakpoints return.
2016-05-23 Tom Tromey <tom@tromey.com>
PR python/17981:
* gdb.python/py-breakpoint.exp (test_bkpt_basic): Add test for
no-breakpoint case.
PR gdb/19194 points out a typo in the documentation. I'm checking
this in as obvious.
2016-05-24 Tom Tromey <tom@tromey.com>
PR gdb/19194:
* gdb.texinfo (gdb man): Fix typo.
This patch adds documentation for the new Rust support in gdb.
2016-05-17 Tom Tromey <tom@tromey.com>
* NEWS: Add Rust item.
2016-05-17 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Supported Languages): Mention Rust. Update menu.
(Rust): New node.
I wanted to unit test the Rust lexer, so I added a simple unit testing
command to gdb.
The intent is that self tests will only be compiled into gdb in
development mode. In release mode they simply won't exist. So, this
exposes $development to C code as GDB_SELF_TEST.
In development mode, test functions are registered with the self test
module. A test function is just a function that does some checks, and
throws an exception on failure.
Then this adds a new "maint selftest" command which invokes the test
functions, and a new dejagnu test case that invokes it.
2016-05-17 Tom Tromey <tom@tromey.com>
* NEWS: Add "maint selftest" entry.
* selftest.h: New file.
* selftest.c: New file.
* maint.c: Include selftest.h.
(maintenance_selftest): New function.
(_initialize_maint_cmds): Add "maint selftest" command.
* configure.ac (GDB_SELF_TEST): Maybe define.
* config.in, configure: Rebuild.
* Makefile.in (SFILES): Add selftest.c.
(COMMON_OBS): Add selftest.o.
2016-05-17 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Maintenance Commands): Document "maint selftest".
2016-05-17 Tom Tromey <tom@tromey.com>
* gdb.gdb/unittest.exp: New file.
Hi,
command "tfind" will find the first trace snapshot if no trace
snapshot is selected, but this behavior isn't documented.
This patch completes the doc of command "tfind" without argument.
gdb/doc:
2016-04-27 Yao Qi <yao.qi@linaro.org>
* gdb.texinfo (tfind): Complete doc about tfind without
argument.
This patch fixes the documentation for the zero_ext bytecode description.
It removes parts that seemed like a copy/paste from ext, since zero_ext
zeros the bits to the left.
gdb/doc/ChangeLog:
* agentexpr.texi (zero_ext): Fix zero_ext description.
This removes support for:
| target | source |
|-------------------+-----------------------|
| target m32rsdi | gdb/remote-m32r-sdi.c |
| target mips | gdb/remote-mips.c |
| target pmon | gdb/remote-mips.c |
| target ddb | gdb/remote-mips.c |
| target rockhopper | gdb/remote-mips.c |
| target lsi | gdb/remote-mips.c |
That is:
- Remote M32R debugging over SDI.
- Debugging boards using the MIPS remote debugging protocol
over a serial line, PMON, and a few variants.
These are the last non-"target remote" remote targets in the tree, if
you don't count "target sim".
Refs:
https://sourceware.org/ml/gdb/2016-03/msg00004.htmlhttps://sourceware.org/ml/gdb-patches/2016-03/msg00580.html
gdb/ChangeLog:
2016-03-31 Pedro Alves <palves@redhat.com>
* NEWS: Mention that support for "target m32rsdi", "target mips",
"target pmon", "target ddb", "target rockhopper", and "target lsi"
was removed.
* Makefile.in (ALL_TARGET_OBS): Remove remote-m32r-sdi.o and
remote-mips.o.
(ALLDEPFILES): Remove remote-m32r-sdi.c and remote-mips.c.
* configure.tgt: Remove all references to remote-m32r-sdi.o and
remote-mips.o.
* mips-tdep.c (deprecated_mips_set_processor_regs_hack): Delete
function.
* mips-tdep.h (deprecated_mips_set_processor_regs_hack): Delete
declaration.
* remote-m32r-sdi.c, remote-mips.c: Delete files.
* symfile.c (generic_load, generic_load): Remove comments.
gdb/doc/ChangeLog:
2016-03-31 Pedro Alves <palves@redhat.com>
* gdb.texinfo (M32R/SDI): Delete node.
(MIPS Embedded): Remove references to the MIPS remote debugging
protocol, PMON and variants, and the associated commands.
gdb/doc/ChangeLog:
2016-03-15 Pedro Alves <palves@redhat.com>
Andreas Arnez <arnez@linux.vnet.ibm.com>
Marcin Kościelnicki <koriakin@0x04.net>
* gdb.texinfo (Tracepoint Actions): Document possible
unreliability of '$_ret'.
Add a new command 'maint info line-table' to display the contents of
GDB's internal line table structure. Useful when trying to understand
problems (within gdb) relating to line tables.
gdb/ChangeLog:
* symmisc.c (maintenance_info_line_tables): New function.
(maintenance_print_one_line_table): New function.
(_initialize_symmisc): Register 'maint info line-table' command.
* NEWS: Mention new command.
gdb/doc/ChangeLog:
* gdb.texinfo (Symbols): Document new 'maint info line-table'
command.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: New tests for 'maint info line-table'.
This patch is a follow-up to "Add printf format specifier for printing
enumerator":
https://sourceware.org/ml/gdb-patches/2016-02/msg00144.html
Instead of having a solution specific to the printf command, Pedro
suggested adding a general purpose function $_as_string() that would
cover this use case and more.
So, in order to print the textual label of an enum, one can use:
(gdb) printf "Visiting node of type %s\n", $_as_string(node)
Visiting node of type NODE_INTEGER
gdb/ChangeLog:
* data-directory/Makefile.in (PYTHON_FILE_LIST): Install
gdb/function/as_string.py.
* python/lib/gdb/function/as_string.py: New file.
* NEWS: Mention the new $_as_string function.
gdb/testsuite/ChangeLog:
* gdb.python/py-as-string.exp: New file.
* gdb.python/py-as-string.c: New file.
gdb/doc/ChangeLog:
* gdb.texinfo (Convenience Functions): Document $_as_string.
gdb/ChangeLog:
Extend "skip" command to support -file, -gfile, -function, -rfunction.
* NEWS: Document new features.
* skip.c: #include "fnmatch.h", "gdb_regex.h".
(skiplist_entry) <file>: Renamed from filename.
<function>: Renamed from function_name.
<file_is_glob, function_is_regexp>: New members.
<compiled_function_regexp, compiled_function_regexp_is_valid>:
New members.
(make_skip_entry): New function.
(free_skiplist_entry, free_skiplist_entry_cleanup): New functions.
(make_free_skiplist_entry_cleanup): New function.
(skip_file_command): Update.
(skip_function, skip_function_command): Update.
(compile_skip_regexp): New functions.
(skip_command): Add support for new options.
(skip_info): Update.
(skip_file_p, skip_gfile_p): New functions.
(skip_function_p, skip_rfunction_p): New functions.
(function_name_is_marked_for_skip): Update and simplify.
(_initialize_step_skip): Update.
* symtab.c: #include "fnmatch.h".
(compare_glob_filenames_for_search): New function.
* symtab.h (compare_glob_filenames_for_search): Declare.
* utils.c (count_path_elements): New function.
(strip_leading_path_elements): New function.
* utils.h (count_path_elements): Declare.
(strip_leading_path_elements): Declare.
gdb/doc/ChangeLog:
* gdb.texinfo (Skipping Over Functions and Files): Document new
options to "skip" command. Update docs of output of "info skip".
gdb/testsuite/ChangeLog:
* gdb.base/skip.c (test_skip): New function.
(end_test_skip_file_and_function): New function.
(test_skip_file_and_function): New function.
* gdb.base/skip1.c (test_skip): New function.
(skip1_test_skip_file_and_function): New function.
* gdb.base/skip.exp: Add tests for new skip options.
* gdb.base/skip-solib.exp: Update expected output.
* gdb.perf/skip-command.cc: New file.
* gdb.perf/skip-command.exp: New file.
* gdb.perf/skip-command.py: New file.
With Intel Memory Protection Extensions it was introduced the concept of
boundary violation. A boundary violations is presented to the inferior as
a segmentation fault having SIGCODE 3. This patch adds a
handler for a boundary violation extending the information displayed
when a bound violation is presented to the inferior. In the stop mode
case the debugger will also display the kind of violation: "upper" or
"lower", bounds and the address accessed.
On no stop mode the information will still remain unchanged. Additional
information about bound violations are not meaningful in that case user
does not know the line in which violation occurred as well.
When the segmentation fault handler is stop mode the out puts will be
changed as exemplified below.
The usual output of a segfault is:
Program received signal SIGSEGV, Segmentation fault
0x0000000000400d7c in upper (p=0x603010, a=0x603030, b=0x603050,
c=0x603070, d=0x603090, len=7) at i386-mpx-sigsegv.c:68
68 value = *(p + len);
In case it is a bound violation it will be presented as:
Program received signal SIGSEGV, Segmentation fault
Upper bound violation while accessing address 0x7fffffffc3b3
Bounds: [lower = 0x7fffffffc390, upper = 0x7fffffffc3a3]
0x0000000000400d7c in upper (p=0x603010, a=0x603030, b=0x603050,
c=0x603070, d=0x603090, len=7) at i386-mpx-sigsegv.c:68
68 value = *(p + len);
In mi mode the output of a segfault is:
*stopped,reason="signal-received",signal-name="SIGSEGV",
signal-meaning="Segmentation fault", frame={addr="0x0000000000400d7c",
func="upper",args=[{name="p", value="0x603010"},{name="a",value="0x603030"}
,{name="b",value="0x603050"}, {name="c",value="0x603070"},
{name="d",value="0x603090"},{name="len",value="7"}],
file="i386-mpx-sigsegv.c",fullname="i386-mpx-sigsegv.c",line="68"},
thread-id="1",stopped-threads="all",core="6"
in the case of a bound violation:
*stopped,reason="signal-received",signal-name="SIGSEGV",
signal-meaning="Segmentation fault",
sigcode-meaning="Upper bound violation",
lower-bound="0x603010",upper-bound="0x603023",bound-access="0x60302f",
frame={addr="0x0000000000400d7c",func="upper",args=[{name="p",
value="0x603010"},{name="a",value="0x603030"},{name="b",value="0x603050"},
{name="c",value="0x603070"},{name="d",value="0x603090"},
{name="len",value="7"}],file="i386-mpx-sigsegv.c",
fullname="i386-mpx-sigsegv.c",line="68"},thread-id="1",
stopped-threads="all",core="6"
2016-02-18 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/ChangeLog:
* NEWS: Add entry for bound violation.
* amd64-linux-tdep.c (amd64_linux_init_abi_common):
Add handler for segmentation fault.
* gdbarch.sh (handle_segmentation_fault): New.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* i386-linux-tdep.c (i386_linux_handle_segmentation_fault): New.
(SIG_CODE_BONDARY_FAULT): New define.
(i386_linux_init_abi): Use i386_mpx_bound_violation_handler.
* i386-linux-tdep.h (i386_linux_handle_segmentation_fault) New.
* i386-tdep.c (i386_mpx_enabled): Add as external.
* i386-tdep.c (i386_mpx_enabled): Add as external.
* infrun.c (handle_segmentation_fault): New function.
(print_signal_received_reason): Use handle_segmentation_fault.
gdb/testsuite/ChangeLog:
* gdb.arch/i386-mpx-sigsegv.c: New file.
* gdb.arch/i386-mpx-sigsegv.exp: New file.
* gdb.arch/i386-mpx-simple_segv.c: New file.
* gdb.arch/i386-mpx-simple_segv.exp: New file.
gdb/doc/ChangeLog:
* gdb.texinfo (Signals): Add bound violation display hints for
a SIGSEGV.
tfile_fetch_registers currently wrongly fetches registers using
gdb order instead of g packet order. On x86_64 with AVX, this causes
problems with ymm*h and orig_rax registers: gdb has ymm*h first, while
g packet has orig_rax first.
gdb/ChangeLog:
* tracefile-tfile.c (tfile_fetch_registers): Use g packet order
instead of gdb order.
gdb/doc/ChangeLog:
* gdb.texinfo (Trace File Format): Remove misleading information
about register block ordering.
For languages with dynamic types, an incorrect program, or uninitialised
variables within a program, could result in an incorrect, overly large
type being associated with a value. Currently, attempting to print such
a variable will result in gdb trying to allocate an overly large buffer.
If this large memory allocation fails then the result can be gdb either
terminating, or (due to memory contention) becoming unresponsive for the
user.
A new user visible variable in gdb helps guard against such problems,
two new commands are available:
set max-value-size
show max-value-size
The 'max-value-size' is the maximum size of memory in bytes that gdb
will allocate for the contents of a value. Any attempt to allocate a
value with a size greater than this will result in an error. The
initial default for this limit is set at 64k, this is based on a similar
limit that exists within the ada specific code.
It is possible for the user to set max-value-size to unlimited, in which
case the old behaviour is restored.
gdb/ChangeLog:
* value.c (max_value_size): New variable.
(MIN_VALUE_FOR_MAX_VALUE_SIZE): New define.
(show_max_value_size): New function.
(check_type_length_before_alloc): New function.
(allocate_value_contents): Call check_type_length_before_alloc.
(set_value_enclosing_type): Likewise.
(_initialize_values): Add set/show handler for max-value-size.
* NEWS: Mention new set/show command.
gdb/doc/ChangeLog:
* gdb.texinfo (Value Sizes): New section.
(Data): Add the 'Value Sizes' node to the menu.
gdb/testsuite/ChangeLog:
* gdb.base/max-value-size.c: New file.
* gdb.base/max-value-size.exp: New file.
* gdb.base/huge.exp: Disable max-value-size for this test.
Older versions of FreeBSD supported userland threading via a pure
user-space threading library (N threads scheduled on 1 process) and
a N:M model (N threads scheduled on M LWPs). However, modern FreeBSD
versions only support a M:M threading model where each user thread is
backed by a dedicated LWP. This thread target only supports this
threading model. It also uses ptrace to query and alter LWP state
directly rather than using libthread_db to simplify the implementation.
FreeBSD recently gained support for reporting LWP events (birth and death
of LWPs). GDB will use LWP events when present. For older systems it
fetches the list of LWPs in the to_update_thread_list target op to update
the list of threads on each stop.
This target supports scheduler locking by using ptrace to suspend
individual LWPs as necessary before resuming a process.
gdb/ChangeLog:
* configure.ac: Check for support for LWP names on FreeBSD.
* fbsd-nat.c [PT_LWPINFO] New variable debug_fbsd_lwp.
[TDP_RFPPWAIT || HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]
(fbsd_fetch_kinfo_proc): Move function earlier.
[PT_LWPINFO] (fbsd_thread_alive): New function.
[PT_LWPINFO] (fbsd_pid_to_str): New function.
[HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME] (fbsd_thread_name): New function.
[PT_LWP_EVENTS] (fbsd_enable_lwp_events): New function.
[PT_LWPINFO] (fbsd_add_threads): New function.
[PT_LWPINFO] (fbsd_update_thread_list): New function.
[PT_LWPINFO] New variable super_resume.
[PT_LWPINFO] (resume_one_thread_cb): New function.
[PT_LWPINFO] (resume_all_threads_cb): New function.
[PT_LWPINFO] (fbsd_resume): New function.
(fbsd_remember_child): Save full ptid instead of plain pid.
(fbsd_is_child_pending): Return ptid of saved child process.
(fbsd_wait): Include lwp in returned ptid and switch to LWP ptid on
first stop.
[PT_LWP_EVENTS] Handle LWP events.
[TDP_RFPPWAIT] Include LWP in child ptid.
(fbsd_post_startup_inferior) [PT_LWP_EVENTS]: Enable LWP events.
(fbsd_post_attach) [PT_LWP_EVENTS]: Enable LWP events.
Add threads for existing processes.
(fbsd_nat_add_target) [PT_LWPINFO]: Set "to_thread_alive" to
"fbsd_thread_alive".
Set "to_pid_to_str" to "fbsd_pid_to_str".
[HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]: Set "to_thread_name" to
"fbsd_thread_name".
[PT_LWPINFO]: Set "to_update_thread_list" to "fbsd_update_thread_list".
Set "to_has_thread_control" to "tc_schedlock".
Set "to_resume" to "fbsd_resume".
(_initialize_fbsd_nat): New function.
* configure: Regenerate.
* config.in: Regenerate.
gdb/doc/ChangeLog:
* gdb.texinfo (Debugging Output): Document "set/show debug fbsd-lwp".
This commit changes GDB like this:
- Program received signal SIGINT, Interrupt.
+ Thread 1 "main" received signal SIGINT, Interrupt.
- Breakpoint 1 at 0x40087a: file threads.c, line 87.
+ Thread 3 "bar" hit Breakpoint 1 at 0x40087a: file threads.c, line 87.
... once the program goes multi-threaded. Until GDB sees a second
thread spawn, the output is still the same as before, per the
discussion back in 2012:
https://www.sourceware.org/ml/gdb/2012-11/msg00010.html
This helps non-stop mode, where you can't easily tell which thread hit
a breakpoint or received a signal:
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 19362) "main" (running)
2 Thread 0x7ffff7fc0700 (LWP 19366) "foo" (running)
3 Thread 0x7ffff77bf700 (LWP 19367) "bar" (running)
(gdb)
Program received signal SIGUSR1, User defined signal 1.
0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
92 lll_wait_tid (pd->tid);
(gdb) b threads.c:87
Breakpoint 1 at 0x40087a: file threads.c, line 87.
(gdb)
Breakpoint 1, thread_function1 (arg=0x1) at threads.c:87
87 usleep (1); /* Loop increment. */
The best the user can do is run "info threads" and try to figure
things out.
It actually also affects all-stop mode, in case of "handle SIG print
nostop":
...
Program received signal SIGUSR1, User defined signal 1.
Program received signal SIGUSR1, User defined signal 1.
Program received signal SIGUSR1, User defined signal 1.
Program received signal SIGUSR1, User defined signal 1.
...
The above doesn't give any clue that these were different threads
getting the SIGUSR1 signal.
I initially thought of lowercasing "breakpoint" in
"Thread 3 hit Breakpoint 1"
but then after trying it I realized that leaving "Breakpoint"
uppercase helps the eye quickly find the relevant information. It's
also easier to implement not showing anything about threads until the
program goes multi-threaded this way.
Here's a larger example session in non-stop mode:
(gdb) c -a&
Continuing.
(gdb) interrupt -a
(gdb)
Thread 1 "main" stopped.
0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
92 lll_wait_tid (pd->tid);
Thread 2 "foo" stopped.
0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
Thread 3 "bar" stopped.
0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
b threads.c:87
Breakpoint 4 at 0x40087a: file threads.c, line 87.
(gdb) b threads.c:67
Breakpoint 5 at 0x400811: file threads.c, line 67.
(gdb) c -a&
Continuing.
(gdb)
Thread 3 "bar" hit Breakpoint 4, thread_function1 (arg=0x1) at threads.c:87
87 usleep (1); /* Loop increment. */
Thread 2 "foo" hit Breakpoint 5, thread_function0 (arg=0x0) at threads.c:68
68 (*myp) ++;
info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 31957) "main" (running)
2 Thread 0x7ffff7fc0700 (LWP 31961) "foo" thread_function0 (arg=0x0) at threads.c:68
3 Thread 0x7ffff77bf700 (LWP 31962) "bar" thread_function1 (arg=0x1) at threads.c:87
(gdb) shell kill -SIGINT 31957
(gdb)
Thread 1 "main" received signal SIGINT, Interrupt.
0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
92 lll_wait_tid (pd->tid);
info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 31957) "main" 0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
2 Thread 0x7ffff7fc0700 (LWP 31961) "foo" thread_function0 (arg=0x0) at threads.c:68
3 Thread 0x7ffff77bf700 (LWP 31962) "bar" thread_function1 (arg=0x1) at threads.c:87
(gdb) t 2
[Switching to thread 2, Thread 0x7ffff7fc0700 (LWP 31961)]
#0 thread_function0 (arg=0x0) at threads.c:68
68 (*myp) ++;
(gdb) catch syscall
Catchpoint 6 (any syscall)
(gdb) c&
Continuing.
(gdb)
Thread 2 "foo" hit Catchpoint 6 (call to syscall nanosleep), 0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
I'll work on documentation next if this looks agreeable.
This patch applies on top of the star wildcards thread IDs series:
https://sourceware.org/ml/gdb-patches/2016-01/msg00291.html
For convenience, I've pushed this to the
users/palves/show-which-thread-caused-stop branch.
gdb/doc/ChangeLog:
2016-01-18 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads): Mention that GDB displays the ID and name
of the thread that hit a breakpoint or received a signal.
gdb/ChangeLog:
2016-01-18 Pedro Alves <palves@redhat.com>
* NEWS: Mention that GDB now displays the ID and name of the
thread that hit a breakpoint or received a signal.
* break-catch-sig.c (signal_catchpoint_print_it): Use
maybe_print_thread_hit_breakpoint.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
* break-catch-throw.c (print_it_exception_catchpoint): Likewise.
* breakpoint.c (maybe_print_thread_hit_breakpoint): New function.
(print_it_catch_fork, print_it_catch_vfork, print_it_catch_solib)
(print_it_catch_exec, print_it_ranged_breakpoint)
(print_it_watchpoint, print_it_masked_watchpoint, bkpt_print_it):
Use maybe_print_thread_hit_breakpoint.
* breakpoint.h (maybe_print_thread_hit_breakpoint): Declare.
* gdbthread.h (show_thread_that_caused_stop): Declare.
* infrun.c (print_signal_received_reason): Print which thread
received signal.
* thread.c (show_thread_that_caused_stop): New function.
gdb/testsuite/ChangeLog:
2016-01-18 Pedro Alves <palves@redhat.com>
* gdb.base/async-shell.exp: Adjust expected output.
* gdb.base/dprintf-non-stop.exp: Adjust expected output.
* gdb.base/siginfo-thread.exp: Adjust expected output.
* gdb.base/watchpoint-hw-hit-once.exp: Adjust expected output.
* gdb.java/jnpe.exp: Adjust expected output.
* gdb.threads/clone-new-thread-event.exp: Adjust expected output.
* gdb.threads/continue-pending-status.exp: Adjust expected output.
* gdb.threads/leader-exit.exp: Adjust expected output.
* gdb.threads/manythreads.exp: Adjust expected output.
* gdb.threads/pthreads.exp: Adjust expected output.
* gdb.threads/schedlock.exp: Adjust expected output.
* gdb.threads/siginfo-threads.exp: Adjust expected output.
* gdb.threads/signal-command-multiple-signals-pending.exp: Adjust
expected output.
* gdb.threads/signal-delivered-right-thread.exp: Adjust expected
output.
* gdb.threads/sigthread.exp: Adjust expected output.
* gdb.threads/watchpoint-fork.exp: Adjust expected output.
Add support for specifying "all threads of inferior N", by writing "*"
as thread number/range in thread ID lists.
E.g., "info threads 2.*" or "thread apply 2.* bt".
gdb/ChangeLog:
2016-01-15 Pedro Alves <palves@redhat.com>
* NEWS: Mention star wildcard ranges.
* cli/cli-utils.c (get_number_or_range): Check state->in_range first.
(number_range_setup_range): New function.
* cli/cli-utils.h (number_range_setup_range): New declaration.
* thread.c (thread_apply_command): Support star TID ranges.
* tid-parse.c (tid_range_parser_finished)
(tid_range_parser_string, tid_range_parser_skip)
(get_tid_or_range, get_tid_or_range): Handle
TID_RANGE_STATE_STAR_RANGE.
(tid_range_parser_star_range): New function.
* tid-parse.h (enum tid_range_state) <TID_RANGE_STATE_STAR_RANGE>:
New value.
(tid_range_parser_star_range): New declaration.
gdb/doc/ChangeLog:
2016-01-15 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads) <thread ID lists>: Document star ranges.
gdb/testsuite/ChangeLog:
2016-01-15 Pedro Alves <palves@redhat.com>
* gdb.multi/tids.exp: Test star wildcard ranges.
This commit adds a new $_gthread convenience variable, that is like
$_thread, but holds the current thread's global thread id.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention $_gthread.
* gdbthread.h (struct thread_info) <global_num>: Mention
$_gthread.
* thread.c (thread_num_make_value_helper): New function.
(thread_id_make_value): Delete.
(thread_id_per_inf_num_make_value, global_thread_id_make_value):
New.
(thread_funcs): Adjust.
(gthread_funcs): New.
(_initialize_thread): Register $_gthread variable.
gdb/testsuite/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* gdb.base/default.exp: Expect $_gthread as well.
* gdb.multi/tids.exp: Test $_gthread.
* gdb.threads/thread-specific.exp: Test $_gthread.
gdb/doc/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads): Document the $_gthread convenience
variable.
(Convenience Vars): Likewise.
This commit adds a new Python InferiorThread.global_num attribute.
This can be used to pass the correct thread ID to Breakpoint.thread,
which takes a global thread ID, not a per-inferior thread number.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention InferiorThread.global_num.
* python/py-infthread.c (thpy_get_global_num): New function.
(thread_object_getset): Register "global_num".
gdb/testsuite/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* gdb.multi/tids.exp: Test InferiorThread.global_num and
Breakpoint.thread.
* gdb.python/py-infthread.exp: Test InferiorThread.global_num.
gdb/doc/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* python.texi (Breakpoints In Python) <Breakpoint.thread>: Add
anchor.
(Threads In Python): Document new InferiorThread.global_num
attribute.
This commit changes GDB to track thread numbers per-inferior. Then,
if you're debugging multiple inferiors, GDB displays
"inferior-num.thread-num" instead of just "thread-num" whenever it
needs to display a thread:
(gdb) info inferiors
Num Description Executable
1 process 6022 /home/pedro/gdb/tests/threads
* 2 process 6037 /home/pedro/gdb/tests/threads
(gdb) info threads
Id Target Id Frame
1.1 Thread 0x7ffff7fc2740 (LWP 6022) "threads" (running)
1.2 Thread 0x7ffff77c0700 (LWP 6028) "threads" (running)
1.3 Thread 0x7ffff7fc2740 (LWP 6032) "threads" (running)
2.1 Thread 0x7ffff7fc1700 (LWP 6037) "threads" (running)
2.2 Thread 0x7ffff77c0700 (LWP 6038) "threads" (running)
* 2.3 Thread 0x7ffff7fc2740 (LWP 6039) "threads" (running)
(gdb)
...
(gdb) thread 1.1
[Switching to thread 1.1 (Thread 0x7ffff7fc2740 (LWP 8155))]
(gdb)
...
etc.
You can still use "thread NUM", in which case GDB infers you're
referring to thread NUM of the current inferior.
The $_thread convenience var and Python's InferiorThread.num attribute
are remapped to the new per-inferior thread number. It's a backward
compatibility break, but since it only matters when debugging multiple
inferiors, I think it's worth doing.
Because MI thread IDs need to be a single integer, we keep giving
threads a global identifier, _in addition_ to the per-inferior number,
and make MI always refer to the global thread IDs. IOW, nothing
changes from a MI frontend's perspective.
Similarly, since Python's Breakpoint.thread and Guile's
breakpoint-thread/set-breakpoint-thread breakpoint methods need to
work with integers, those are adjusted to work with global thread IDs
too. Follow up patches will provide convenient means to access
threads' global IDs.
To avoid potencially confusing users (which also avoids updating much
of the testsuite), if there's only one inferior and its ID is "1",
IOW, the user hasn't done anything multi-process/inferior related,
then the "INF." part of thread IDs is not shown. E.g,.:
(gdb) info inferiors
Num Description Executable
* 1 process 15275 /home/pedro/gdb/tests/threads
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
(gdb) add-inferior
Added inferior 2
(gdb) info threads
Id Target Id Frame
* 1.1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
(gdb)
No regressions on x86_64 Fedora 20.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention that thread IDs are now per inferior and global
thread IDs.
* Makefile.in (SFILES): Add tid-parse.c.
(COMMON_OBS): Add tid-parse.o.
(HFILES_NO_SRCDIR): Add tid-parse.h.
* ada-tasks.c: Adjust to use ptid_to_global_thread_id.
* breakpoint.c (insert_breakpoint_locations)
(remove_threaded_breakpoints, bpstat_check_breakpoint_conditions)
(print_one_breakpoint_location, set_longjmp_breakpoint)
(check_longjmp_breakpoint_for_call_dummy)
(set_momentary_breakpoint): Adjust to use global IDs.
(find_condition_and_thread, watch_command_1): Use parse_thread_id.
(until_break_command, longjmp_bkpt_dtor)
(breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust
to use global IDs.
* dummy-frame.c (pop_dummy_frame_bpt): Adjust to use
ptid_to_global_thread_id.
* elfread.c (elf_gnu_ifunc_resolver_stop): Likewise.
* gdbthread.h (struct thread_info): Rename field 'num' to
'global_num. Add new fields 'per_inf_num' and 'inf'.
(thread_id_to_pid): Rename thread_id_to_pid to
global_thread_id_to_ptid.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(find_thread_id): Rename to ...
(find_thread_global_id): ... this.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare.
(print_thread_info): Add comment.
* tid-parse.h: New file.
* tid-parse.c: New file.
* infcmd.c (step_command_fsm_prepare)
(step_command_fsm_should_stop): Adjust to use the global thread
ID.
(until_next_command, until_next_command)
(finish_command_fsm_should_stop): Adjust to use the global thread
ID.
(attach_post_wait): Adjust to check the inferior number too.
* inferior.h (struct inferior) <highest_thread_num>: New field.
* infrun.c (handle_signal_stop)
(insert_exception_resume_breakpoint)
(insert_exception_resume_from_probe): Adjust to use the global
thread ID.
* record-btrace.c (record_btrace_open): Use global thread IDs.
* remote.c (process_initial_stop_replies): Also consider the
inferior number.
* target.c (target_pre_inferior): Clear the inferior's highest
thread num.
* thread.c (clear_thread_inferior_resources): Adjust to use the
global thread ID.
(new_thread): New inferior parameter. Adjust to use it. Set both
the thread's global ID and the thread's per-inferior ID.
(add_thread_silent): Adjust.
(find_thread_global_id): New.
(find_thread_id): Make static. Adjust to rename.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(thread_id_to_pid): Rename to ...
(global_thread_id_to_ptid): ... this. Adjust.
(first_thread_of_process): Adjust.
(do_captured_list_thread_ids): Adjust to use global thread IDs.
(should_print_thread): New function.
(print_thread_info): Rename to ...
(print_thread_info_1): ... this, and add new show_global_ids
parameter. Handle it. Iterate over inferiors.
(print_thread_info): Reimplement as wrapper around
print_thread_info_1.
(show_inferior_qualified_tids): New function.
(print_thread_id): Use it.
(tp_array_compar): Compare inferior numbers too.
(thread_apply_command): Use tid_range_parser.
(do_captured_thread_select): Use parse_thread_id.
(thread_id_make_value): Adjust.
(_initialize_thread): Adjust "info threads" help string.
* varobj.c (struct varobj_root): Update comment.
(varobj_create): Adjust to use global thread IDs.
(value_of_root_1): Adjust to use global_thread_id_to_ptid.
* windows-tdep.c (display_tib): No longer accept an argument.
* cli/cli-utils.c (get_number_trailer): Make extern.
* cli/cli-utils.h (get_number_trailer): Declare.
(get_number_const): Adjust documentation.
* mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global
thread IDs.
* mi/mi-interp.c (mi_new_thread, mi_thread_exit)
(mi_on_normal_stop, mi_output_running_pid, mi_on_resume):
* mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise.
* guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x):
Likewise.
* python/py-breakpoint.c (bppy_set_thread): Likewise.
* python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
* python/py-infthread.c (thpy_get_num): Add comment and return the
per-inferior thread ID.
(thread_object_getset): Update comment of "num".
gdb/testsuite/ChangeLog:
2016-01-07 Pedro Alves <palves@redhat.com>
* gdb.base/break.exp: Adjust to output changes.
* gdb.base/hbreak2.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/watch_thread_num.exp: Likewise.
* gdb.linespec/keywords.exp: Likewise.
* gdb.multi/info-threads.exp: Likewise.
* gdb.threads/thread-find.exp: Likewise.
* gdb.multi/tids.c: New file.
* gdb.multi/tids.exp: New file.
gdb/doc/ChangeLog:
2016-01-07 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads): Document per-inferior thread IDs,
qualified thread IDs, global thread IDs and thread ID lists.
(Set Watchpoints, Thread-Specific Breakpoints): Adjust to refer to
thread IDs.
(Convenience Vars): Document the $_thread convenience variable.
(Ada Tasks): Adjust to refer to thread IDs.
(GDB/MI Async Records, GDB/MI Thread Commands, GDB/MI Ada Tasking
Commands, GDB/MI Variable Objects): Update to mention global
thread IDs.
* guile.texi (Breakpoints In Guile)
<breakpoint-thread/set-breakpoint-thread breakpoint>: Mention
global thread IDs instead of thread IDs.
* python.texi (Threads In Python): Adjust documentation of
InferiorThread.num.
(Breakpoint.thread): Mention global thread IDs instead of thread
IDs.
So a script can easily get at a thread's inferior and its number.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention InferiorThread.inferior.
* python/py-infthread.c (thpy_get_inferior): New.
(thread_object_getset): Register "inferior".
gdb/testsuite/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* gdb.python/py-infthread.exp: Test InferiorThread.inferior.
gdb/doc/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* python.texi (Threads In Python): Document
InferiorThread.inferior.
This adds a new QCatchSyscalls packet to enable 'catch syscall', and new
stop reasons "syscall_entry" and "syscall_return" for those events. It
is currently only supported on Linux x86 and x86_64.
gdb/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS (Changes since GDB 7.10): Mention QCatchSyscalls and the
syscall_entry and syscall_return stop reasons. Mention GDB
support for remote catch syscall.
* remote.c (PACKET_QCatchSyscalls): New enum.
(remote_set_syscall_catchpoint): New function.
(remote_protocol_features): New element for QCatchSyscalls.
(remote_parse_stop_reply): Parse syscall_entry/return stops.
(init_remote_ops): Install remote_set_syscall_catchpoint.
(_initialize_remote): Config QCatchSyscalls.
* linux-nat.h (struct lwp_info) <syscall_state>: Comment typo.
gdb/doc/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Remote Configuration): List the QCatchSyscalls packet.
(Stop Reply Packets): List the syscall entry and return stop reasons.
(General Query Packets): Describe QCatchSyscalls, and add it to the
table and the detailed list of stub features.
gdb/gdbserver/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* inferiors.h: Include "gdb_vecs.h".
(struct process_info): Add syscalls_to_catch.
* inferiors.c (remove_process): Free syscalls_to_catch.
* remote-utils.c (prepare_resume_reply): Report syscall_entry and
syscall_return stops.
* server.h (UNKNOWN_SYSCALL, ANY_SYSCALL): Define.
* server.c (handle_general_set): Handle QCatchSyscalls.
(handle_query): Report support for QCatchSyscalls.
* target.h (struct target_ops): Add supports_catch_syscall.
(target_supports_catch_syscall): New macro.
* linux-low.h (struct linux_target_ops): Add get_syscall_trapinfo.
(struct lwp_info): Add syscall_state.
* linux-low.c (handle_extended_wait): Mark syscall_state as an entry.
Maintain syscall_state and syscalls_to_catch across exec.
(get_syscall_trapinfo): New function, proxy to the_low_target.
(linux_low_ptrace_options): Enable PTRACE_O_TRACESYSGOOD.
(linux_low_filter_event): Toggle syscall_state entry/return for
syscall traps, and set it ignored for all others.
(gdb_catching_syscalls_p): New function.
(gdb_catch_this_syscall_p): New function.
(linux_wait_1): Handle SYSCALL_SIGTRAP.
(linux_resume_one_lwp_throw): Add PTRACE_SYSCALL possibility.
(linux_supports_catch_syscall): New function.
(linux_target_ops): Install it.
* linux-x86-low.c (x86_get_syscall_trapinfo): New function.
(the_low_target): Install it.
gdb/testsuite/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/catch-syscall.c (do_execve): New variable.
(main): Conditionally trigger an execve.
* gdb.base/catch-syscall.exp: Enable testing for remote targets.
(test_catch_syscall_execve): New, check entry/return across execve.
(do_syscall_tests): Call test_catch_syscall_execve.
The GNU Coding Standards say:
"Please do not include any trademark acknowledgements in GNU
software packages or documentation."
gdb/ChangeLog:
2016-01-12 Pedro Alves <palves@redhat.com>
Remove use of the registered trademark symbol throughout.
gdb/gdbserver/ChangeLog:
2016-01-12 Pedro Alves <palves@redhat.com>
Remove use of the registered trademark symbol throughout.
gdb/doc/ChangeLog:
2016-01-12 Pedro Alves <palves@redhat.com>
Remove use of the registered trademark symbol throughout.
This patch changes the document that interrupt (ctrl-c) is not ignored
when the program is stopped.
When the interrupt was supported in remote target, people thought interrupt
is meaningless when the program is stopped. See
https://www.sourceware.org/ml/gdb/2005-11/msg00349.htmlhttps://www.sourceware.org/ml/gdb-patches/2005-11/msg00307.html
recently we find it is hard to preserve this feature "ignore interrupt
while program is stopped" when we fix some other bugs. See
https://sourceware.org/ml/gdb-patches/2016-01/msg00039.html
so we think we can go to the simpler approach "not ignoring ctrl-c when
program is stopped". As a result, we tweak the documentation here.
gdb/doc:
2016-01-12 Yao Qi <yao.qi@linaro.org>
* gdb.texinfo (Interrupts): Update the document on handling
interrupt when program is stopped.
[This reapplies a change that was accidentally reverted with c0ecb95f3d.]
Before:
(gdb) info threads
Id Target Id Frame
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
After:
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
gdb/doc/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.texinfo (Inferiors and Programs): Adjust "maint info
program-spaces" example to ascending order listing.
(Threads): Adjust "info threads" example to ascending order
listing.
(Forks): Adjust "info inferiors" example to ascending order
listing.
gdb/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* inferior.c (add_inferior_silent): Append the new inferior to the
end of the list.
* progspace.c (add_program_space): Append the new pspace to the
end of the list.
* thread.c (new_thread): Append the new thread to the end of the
list.
gdb/testsuite/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.base/foll-exec-mode.exp: Adjust to GDB listing inferiors and
threads in ascending order.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/multi-forks.exp: Likewise.
* gdb.mi/mi-nonstop.exp: Likewise.
* gdb.mi/mi-nsintrall.exp: Likewise.
* gdb.multi/base.exp: Likewise.
* gdb.multi/multi-arch.exp: Likewise.
* gdb.python/py-inferior.exp: Likewise.
* gdb.threads/break-while-running.exp: Likewise.
* gdb.threads/execl.exp: Likewise.
* gdb.threads/gcore-thread.exp: Likewise.
* gdb.threads/info-threads-cur-sal.exp: Likewise.
* gdb.threads/kill.exp: Likewise.
* gdb.threads/linux-dp.exp: Likewise.
* gdb.threads/multiple-step-overs.exp: Likewise.
* gdb.threads/next-bp-other-thread.exp: Likewise.
* gdb.threads/step-bg-decr-pc-switch-thread.exp: Likewise.
* gdb.threads/step-over-lands-on-breakpoint.exp: Likewise.
* gdb.threads/step-over-trips-on-watchpoint.exp: Likewise.
* gdb.threads/thread-find.exp: Likewise.
* gdb.threads/tls.exp: Likewise.
* lib/mi-support.exp (mi_reverse_list): Delete.
(mi_check_thread_states): No longer reverse list.
I was getting
gu (print arg0)^M
= 0x7fffffffdafb
"/unsafebuild-x86_64-redhat-linux-gnu/gdb/testsuite.unix.-m64/outputs/gdb.guile/scm-value/scm-"...^M
(gdb) FAIL: gdb.guile/scm-value.exp: verify dereferenced value
python print (arg0)^M
0x7fffffffdafd
"/unsafebuild-x86_64-redhat-linux-gnu/gdb/testsuite.unix.-m64/outputs/gdb.python/py-value/py-v"...^M
(gdb) FAIL: gdb.python/py-value.exp: verify dereferenced value
and also:
(gdb) p argv[0]^M
$2 = 0x7fffffffd832 "/home/jkratoch/redhat/gdb-test-", 'x' <repeats 169
times>...^M
(gdb) FAIL: gdb.guile/scm-value.exp: argv[0] should be available on this
target
gdb/testsuite/ChangeLog
2016-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.guile/scm-value.exp (test_value_in_inferior): Set print elements
and repeats to unlimited.
* gdb.python/py-value.exp: Likewise.
* lib/gdb.exp (gdb_has_argv0): Save and temporarily set print elements
and repeats to unlimited.
This patch implements documentation updates for target remote mode fork and
exec events. A summary of the rationale for the changes made here:
* Connecting to a remote target -- explain that the two protocols exist.
* Connecting in target remote mode -- explain invoking gdbserver for target
remote mode, and move remote-specific text from original "Connecting to a
remote target" section.
* Connecting in target extended-remote mode -- promote this section from
"Using the gdbserver Program | Running gdbserver | Multi-Process Mode for
gdbserver". Put it next to the target remote mode section.
* Host and target files -- collect paragraphs dealing with how to locate
symbol files from original sections "Connecting to a remote target" and
"Using the gdbserver program | Connecting to gdbserver".
* Steps for connecting to a remote target -- used to be "Using the
gdbserver program | Connecting to gdbserver"
* Remote connection commands -- used to be the bulk of "Connecting to a
remote target". Added "target extended-remote" commands and information.
gdb/ChangeLog:
* NEWS: Announce fork and exec event support for target remote.
gdb/doc/ChangeLog:
* gdb.texinfo (Forks): Correct Linux kernel version where
fork and exec events are supported, add notes about support
of these events in target remote mode.
(Connecting): Reorganize and clarify distinctions between
target remote, extended-remote, and multiprocess.
Reorganize related text from separate sections into new
sections.
(Server): Note effects of target extended-remote mode.
Delete section on Multi-Process Mode for gdbserver.
Move some text to "Connecting" node.
This warning is a few years out of date -- there's always a thread
nowadays.
gdb/doc/ChangeLog:
* gdb.texinfo (Threads): Replace warning with explanation
about single-threaded programs.
HP-UX and SGI/IRIX are no longer supported. Remove references
throughout.
AFAICS from the sources, "catch fork" seems to be supported in
multiple Unix systems -- just remove the "only works on xxx" remarks.
Update the list of supported shared library types.
gdb/doc/ChangeLog:
* gdb.texinfo (Threads): Remove mention of SGI.
(Forks): Remove mention of HP-UX.
(Breakpoints): Remove mention of HP-UX.
(Set Watchpoints) <hardware watchpoints>: Don't mention HP-UX.
Reword in terms of architectures.
(Set Catchpoints) <catch exec, catch fork, catch vfork>: Don't
mention supported systems.
(Convenience Vars): Don't mention HP-UX.
(Jumping): Remove mention of HP-UX in comment.
(Files) <shared libraries>: Update supported shared library types
list. Remove mention of HP-UX.
(Native): Remove HP-UX subsection.
(SVR4 Process Information): Remove mention of HP-UX.
Commit fc58fa65d4 (gdb/doc: Restructure frame command documentation)
reordered the sections in the 'Examining the Stack' chapter, but
missed updating the menu:
src/gdb/doc/gdb.texinfo:6968: warning: node next `Backtrace' in menu `Frame Filter Management' and in sectioning `Selection' differ
src/gdb/doc/gdb.texinfo:7167: warning: node prev `Selection' in menu `Frame Filter Management' and in sectioning `Backtrace' differ
src/gdb/doc/gdb.texinfo:7252: warning: node `Frame Filter Management' is next for `Frame Info' in sectioning but not in menu
src/gdb/doc/gdb.texinfo:7317: warning: node `Selection' is next for `Frame Filter Management' in menu but not in sectioning
src/gdb/doc/gdb.texinfo:7317: warning: node prev `Frame Filter Management' in menu `Backtrace' and in sectioning `Frame Info' differ
gdb/doc/ChangeLog:
2015-12-10 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Stack): Reorder menu.
This set of patches add support for the zero-padded hexadecimal format for
varobj's, defined as "zero-hexadecimal". We currently only support regular
non-zero-padded hexadecimal.
Talking with IDE developers, they would like to have this option that is
already available to GDB's print/x commands, in the CLI, as 'z'.
gdb/ChangeLog:
2015-12-09 Luis Machado <lgustavo@codesourcery.com>
* gdb/mi/mi-cmd-var.c (mi_parse_format): Handle new "zero-hexadecimal"
format.
* gdb/varobj.c (varobj_format_string): Add "zero-hexadecimal" entry.
(format_code): Add 'z' entry.
(varobj_set_display_format): Handle FORMAT_ZHEXADECIMAL.
* gdb/varobj.h (varobj_display_formats) <FORMAT_ZHEXADECIMAL>: New enum
field.
* NEWS: Add new note to MI changes citing the new zero-hexadecimal
format for -var-set-format.
gdb/doc/ChangeLog:
2015-12-09 Luis Machado <lgustavo@codesourcery.com>
* gdb.texinfo (GDB/MI Variable Objects): Update text to mention
-var-set-format's new zero-hexadecimal format.
gdb/testsuite/ChangeLog:
2015-12-09 Luis Machado <lgustavo@codesourcery.com>
* gdb.mi/mi-var-display.exp: Add new checks for the zero-hexadecimal
format and change test names to make them unique.
gdb/ChangeLog:
* NEWS: Announce this enhancement and the corresponding new
option.
gdb/doc/ChangeLog:
* gdb.texinfo (Ada Mode Into): Move overloading support
description to its own node.
(Overloading support for Ada): New node.
Testing with "maint set target-non-stop on" causes regressions in
tests that rely on TARGET_WAITKIND_NO_RESUMED, which isn't modelled on
the RSP. In real all-stop, gdbserver detects the situation and
reporst error to GDB, and so the tests (e.g.,
gdb.threads/no-unwaited-for-left.exp) at fail quickly. But with
"maint set target-non-stop on", GDB instead hangs forever waiting for
a stop reply that never comes, and so the tests take longer to time
out.
This adds a new "N" stop reply packet that maps 1-1 to
TARGET_WAITKIND_NO_RESUMED.
gdb/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
PR 14618
* NEWS (New remote packets): Mention the N stop reply.
* remote.c (remote_protocol_features): Add "no-resumed" entry.
(remote_query_supported): Report no-resumed+ support.
(remote_parse_stop_reply): Handle 'N'.
(process_stop_reply): Handle TARGET_WAITKIND_NO_RESUMED.
(remote_wait_as): Handle 'N' / TARGET_WAITKIND_NO_RESUMED.
(_initialize_remote): Register "set/show remote
no-resumed-stop-reply" commands.
gdb/doc/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
PR 14618
* gdb.texinfo (Stop Reply Packets): Document the N stop reply.
(Remote Configuration): Add the "set/show remote
no-resumed-stop-reply" to the available settings table.
(General Query Packets): Document the "no-resumed" qSupported
feature.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
PR 14618
* linux-low.c (linux_wait_1): If the last resumed thread is gone,
report TARGET_WAITKIND_NO_RESUMED.
* remote-utils.c (prepare_resume_reply): Handle
TARGET_WAITKIND_NO_RESUMED.
* server.c (report_no_resumed): New global.
(handle_query) <qSupported>: Handle "no-resumed+". Report
"no-resumed+" support.
(resume): When the target reports TARGET_WAITKIND_NO_RESUMED, only
return error if the client doesn't support no-resumed events.
(push_stop_notification): New function.
(handle_target_event): Use it. Report TARGET_WAITKIND_NO_RESUMED
events if the client supports them.
gdb/testsuite/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.threads/no-unwaited-for-left.exp: Remove setup_kfail calls.
When testing with "maint set target-non-stop on", a few
threading-related tests expose an issue that requires new RSP packets.
Say there are 3 threads running, 1-3. If GDB tries to stop thread 1,
2 and 3, and then waits for their stops, but meanwhile say, thread 2
exits, GDB hangs forever waiting for a stop for thread 2 that won't
ever happen.
This patch fixes the issue by adding support for thread exit events to
the protocol. However, we don't want these always enabled, as they're
useless most of the time, and would slow down remote debugging. So I
made it so that GDB can enable/disable them, and then made gdb do that
around the cases that need it, which currently is only
infrun.c:stop_all_threads.
In turn, if we have thread exit events, then the extra "thread x
exited" traffic slows down attach-many-short-lived-threads.exp enough
that gdb has trouble keeping up with new threads that are spawned
while gdb tries to stop existing ones. To fix that I added support
for the counterpart thread created events too. Enabling those when we
try to stop threads ensures that new threads never get a chance to
themselves start new threads, killing the race.
gdb/doc/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Remote Configuration): List "set/show remote
thread-events" command in configuration table.
(Stop Reply Packets): Document "T05 create" stop
reason and 'w' stop reply.
(General Query Packets): Document QThreadEvents packet. Document
QThreadEvents qSupported feature.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* linux-low.c (handle_extended_wait): Assert that the LWP's
waitstatus is TARGET_WAITKIND_IGNORE. If GDB wants to hear about
thread create events, leave the new child's status pending.
(linux_low_filter_event): If GDB wants to hear about thread exit
events, leave the LWP marked dead and don't delete it.
(linux_wait_for_event_filtered): Don't check for thread exit.
(filter_exit_event): New function.
(linux_wait_1): Use it, when returning an exit event.
(linux_resume_one_lwp_throw): Assert that the LWP's
waitstatus is TARGET_WAITKIND_IGNORE.
* remote-utils.c (prepare_resume_reply): Handle
TARGET_WAITKIND_THREAD_CREATED and TARGET_WAITKIND_THREAD_EXITED.
* server.c (report_thread_events): New global.
(handle_general_set): Handle QThreadEvents.
(handle_query) <qSupported>: Handle and report QThreadEvents+;
(handle_target_event): Handle TARGET_WAITKIND_THREAD_CREATED and
TARGET_WAITKIND_THREAD_EXITED.
* server.h (report_thread_events): Declare.
gdb/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* NEWS (New commands): Mention "set/show remote thread-events"
commands.
(New remote packets): Mention thread created/exited stop reasons
and QThreadEvents packet.
* infrun.c (disable_thread_events): New function.
(stop_all_threads): Disable/enable thread create/exit events.
Handle TARGET_WAITKIND_THREAD_EXITED.
(handle_inferior_event_1): Handle TARGET_WAITKIND_THREAD_CREATED
and TARGET_WAITKIND_THREAD_EXITED.
* remote.c (remove_child_of_pending_fork): Also remove threads of
threads that have TARGET_WAITKIND_THREAD_EXITED events.
(remote_parse_stop_reply): Handle "create" magic register. Handle
'w' stop reply.
(initialize_remote): Install remote_thread_events as
to_thread_events target hook.
(remote_thread_events): New function.
* target-delegates.c: Regenerate.
* target.c (target_thread_events): New function.
* target.h (struct target_ops) <to_thread_events>: New field.
(target_thread_events): Declare.
* target/waitstatus.c (target_waitstatus_to_string): Handle
TARGET_WAITKIND_THREAD_CREATED and TARGET_WAITKIND_THREAD_EXITED.
* target/waitstatus.h (enum target_waitkind)
<TARGET_WAITKIND_THREAD_CREATED, TARGET_WAITKIND_THREAD_EXITED):
New values.
There's currently no non-stop equivalent of the all-stop ^C (\003)
"packet" that GDB sends when a ctrl-c is pressed while a foreground
command is active. There's vCont;t, but that's defined to cause a
"signal 0" stop.
This fixes many tests that type ^C, when testing with extended-remote
with "maint set target-non-stop on". E.g.:
Continuing.
talk to me baby
PASS: gdb.base/interrupt.exp: process is alive
a
a
PASS: gdb.base/interrupt.exp: child process ate our char
^C
[Thread 22730.22730] #1 stopped.
0x0000003615ee6650 in __read_nocancel () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
(gdb) FAIL: gdb.base/interrupt.exp: send_gdb control C
p func1 ()
gdb/
2015-11-30 Pedro Alves <palves@redhat.com>
* NEWS (New remote packets): Mention vCtrlC.
* remote.c (PACKET_vCtrlC): New enum value.
(async_remote_interrupt): Call target_interrupt instead of
target_stop.
(remote_interrupt_as): Remove 'ptid' parameter.
(remote_interrupt_ns): New function.
(remote_stop): Adjust.
(remote_interrupt): If the target is in non-stop mode, try
interrupting with vCtrlC.
(initialize_remote): Install set remote ctrl-c packet.
gdb/doc/
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Bootstrapping): Add "interrupting remote targets"
anchor.
(Packets): Document vCtrlC.
gdb/gdbserver/
2015-11-30 Pedro Alves <palves@redhat.com>
* server.c (handle_v_requests): Handle vCtrlC.
This patch adds support for thread names in the remote protocol, and
updates gdb/gdbserver to use it. The information is added to the XML
description sent in response to the qXfer:threads:read packet.
gdb/ChangeLog:
* linux-nat.c (linux_nat_thread_name): Replace implementation by call
to linux_proc_tid_get_name.
* nat/linux-procfs.c (linux_proc_tid_get_name): New function,
implementation inspired by linux_nat_thread_name.
* nat/linux-procfs.h (linux_proc_tid_get_name): New declaration.
* remote.c (struct private_thread_info) <name>: New field.
(free_private_thread_info): Free name field.
(remote_thread_name): New function.
(thread_item_t) <name>: New field.
(clear_threads_listing_context): Free name field.
(start_thread): Get name xml attribute.
(thread_attributes): Add "name" attribute.
(remote_update_thread_list): Copy name field.
(init_remote_ops): Assign remote_thread_name callback.
* target.h (target_thread_name): Update comment.
* NEWS: Mention remote thread name support.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_target_ops): Use linux_proc_tid_get_name.
* server.c (handle_qxfer_threads_worker): Refactor to include thread
name in reply.
* target.h (struct target_ops) <thread_name>: New field.
(target_thread_name): New macro.
gdb/doc/ChangeLog:
* gdb.texinfo (Thread List Format): Mention thread names.
Before:
(gdb) info threads
Id Target Id Frame
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
After:
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
gdb/doc/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.texinfo (Inferiors and Programs): Adjust "maint info
program-spaces" example to ascending order listing.
(Threads): Adjust "info threads" example to ascending order
listing.
(Forks): Adjust "info inferiors" example to ascending order
listing.
gdb/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* inferior.c (add_inferior_silent): Append the new inferior to the
end of the list.
* progspace.c (add_program_space): Append the new pspace to the
end of the list.
* thread.c (new_thread): Append the new thread to the end of the
list.
gdb/testsuite/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.base/foll-exec-mode.exp: Adjust to GDB listing inferiors and
threads in ascending order.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/multi-forks.exp: Likewise.
* gdb.mi/mi-nonstop.exp: Likewise.
* gdb.mi/mi-nsintrall.exp: Likewise.
* gdb.multi/base.exp: Likewise.
* gdb.multi/multi-arch.exp: Likewise.
* gdb.python/py-inferior.exp: Likewise.
* gdb.threads/break-while-running.exp: Likewise.
* gdb.threads/execl.exp: Likewise.
* gdb.threads/gcore-thread.exp: Likewise.
* gdb.threads/info-threads-cur-sal.exp: Likewise.
* gdb.threads/kill.exp: Likewise.
* gdb.threads/linux-dp.exp: Likewise.
* gdb.threads/multiple-step-overs.exp: Likewise.
* gdb.threads/next-bp-other-thread.exp: Likewise.
* gdb.threads/step-bg-decr-pc-switch-thread.exp: Likewise.
* gdb.threads/step-over-lands-on-breakpoint.exp: Likewise.
* gdb.threads/step-over-trips-on-watchpoint.exp: Likewise.
* gdb.threads/thread-find.exp: Likewise.
* gdb.threads/tls.exp: Likewise.
* lib/mi-support.exp (mi_reverse_list): Delete.
(mi_check_thread_states): No longer reverse list.
Add support for the /s modifier of the "record instruction-history" command. It
behaves exactly like /m and prints disassembled instructions in the order in
which they were recorded with interleaved sources. We accept /s in addition
to /m to align with the "disassemble" command.
The "record instruction-history" modifiers were not documented. Document
all of them.
gdb/
* record.c (get_insn_history_modifiers): Set DISASSEMBLY_SOURCE
instead of DISASSEMBLY_SOURCE_DEPRECATED. Also accept /s.
(_initialize_record): Document the /s modifier.
* NEWS: Announce record instruction-history's new /s modifier.
doc/
* gdb.texinfo (Process Record and Replay): Document "record
instruction-history" modifiers.
The 'frame' command is documented in two places. The 'select-frame'
command is only mentioned in one of these places.
Of the two places, having the description of 'frame' and 'select-frame'
in the section 'Selecting a Frame' seems like the most obvious choice,
which is where things like 'up' and 'down' are also documented.
This commit moves the documentation of 'frame' and 'select-frame' into
the 'Selecting a Frame' section, and removes the duplicate documentation
of the 'frame' command.
At the same time I have reordered the sections in the 'Examining the
Stack' chapter, moving the discussion of frame filters to the end of the
chapter; it feels odd that we talk about frame filters before such basic
things like navigating the stack, or examining stack frames in general.
gdb/doc/ChangeLog:
* gdb.texinfo (Frames): Remove 'frame' and 'select-frame'
description.
(Frame Filter Management): Move to later in the 'Examining the
Stack' chapter.
(Selection): Add entry for 'select-frame'.
gdb/doc/ChangeLog:
* gdb.texinfo (Process Record and Replay): Fix syntax of
"record instruction-history begin, end" and
"record function-call-history begin, end".
Record targets behave as if scheduler-locking were on in replay mode. Add a
new scheduler-locking option "replay" to make this implicit behaviour explicit.
It behaves like "on" in replay mode and like "off" in record mode.
By making the current behaviour a scheduler-locking option, we allow the user
to change it. Since it is the current behaviour, this new option is also
the new default.
One caveat is that when resuming a thread that is at the end of its execution
history, record btrace implicitly stops replaying other threads and resumes
the entire process. This is a convenience feature to not require the user
to explicitly move all other threads to the end of their execution histories
before being able to resume the process.
We mimick this behaviour with scheduler-locking replay and move it from
record-btrace into infrun. With all-stop on top of non-stop, we can't do
this in record-btrace anymore.
Record full does not really support multi-threading and is therefore not
impacted. If it were extended to support multi-threading, it would 'benefit'
from this change. The good thing is that all record targets will behave the
same with respect to scheduler-locking.
I put the code for this into clear_proceed_status. It also sends the
about_to_proceed notification.
gdb/
* NEWS: Announce new scheduler-locking mode.
* infrun.c (schedlock_replay): New.
(scheduler_enums): Add schedlock_replay.
(scheduler_mode): Change default to schedlock_replay.
(user_visible_resume_ptid): Handle schedlock_replay.
(clear_proceed_status_thread): Stop replaying if resumed thread is
not replaying.
(schedlock_applies): Handle schedlock_replay.
(_initialize_infrun): Document new scheduler-locking mode.
* record-btrace.c (record_btrace_resume): Remove code to stop other
threads when not replaying the resumed thread.
doc/
* gdb.texinfo (All-Stop Mode): Describe new scheduler-locking mode.
The previous manual change was wrong. The vfork parent thread ID
should be reported with the usual "thread" magic register:
Sending packet: $vCont;c:p7260.7260#1e...Packet received: OK
- Notification received: Stop:T05vforkdone:;
+ Notification received: Stop:T05vforkdone:;thread:p7260.7260
^^^^^^^^^^^^^^^^^
This is already how the parent is reported in the vfork/fork events,
and is actually what the fix made gdbserver do. Following the
documentation change, the event would have been reported like this
instead:
Notification received: Stop:T05vforkdone:p7260.7260
gdb/doc/ChangeLog:
2015-09-15 Pedro Alves <palves@redhat.com>
PR remote/18965
* gdb.texinfo (Stop Reply Packets): Revert previous change to
the vforkdone description.
The vforkdone stop reply misses indicating the thread ID of the vfork
parent which the event relates to:
@cindex vfork events, remote reply
@item vfork
The packet indicates that @code{vfork} was called, and @var{r}
is the thread ID of the new child process. Refer to
@ref{thread-id syntax} for the format of the @var{thread-id}
field. This packet is only applicable to targets that support
vfork events.
@cindex vforkdone events, remote reply
@item vforkdone
The packet indicates that a child process created by a vfork
has either called @code{exec} or terminated, so that the
address spaces of the parent and child process are no longer
shared. The @var{r} part is ignored. This packet is only
applicable to targets that support vforkdone events.
Unfortunately, this is not just a documentation issue. GDBserver
is really not specifying the thread ID. I noticed because
in non-stop mode, gdb complains:
[Thread 6089.6089] #1 stopped.
#0 0x0000003615a011f0 in ?? ()
0x0000003615a011f0 in ?? ()
(gdb) set debug remote 1
(gdb) c
Continuing.
Sending packet: $QPassSignals:e;10;14;17;1a;1b;1c;21;24;25;2c;4c;#5f...Packet received: OK
Sending packet: $vCont;c:p17c9.17c9#88...Packet received: OK
Notification received: Stop:T05vfork:p17ce.17ce;06:40d7ffffff7f0000;07:30d7ffffff7f0000;10:e4c9eb1536000000;thread:p17c9.17c9;core:2;
Sending packet: $vStopped#55...Packet received: OK
Sending packet: $D;17ce#af...Packet received: OK
Sending packet: $vCont;c:p17c9.17c9#88...Packet received: OK
Notification received: Stop:T05vforkdone:;
No process or thread specified in stop reply: T05vforkdone:;
(gdb)
This is not non-stop-mode-specific, however. Consider e.g., that in
all-stop, you may be debugging more than one process at the same time.
You continue, and both processes vfork. So when you next get a
T05vforkdone, there's no way to tell which of the parent processes is
done with the vfork.
Tests will be added later.
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-09-15 Pedro Alves <palves@redhat.com>
PR remote/18965
* remote-utils.c (prepare_resume_reply): Merge
TARGET_WAITKIND_VFORK_DONE switch case with the
TARGET_WAITKIND_FORKED case.
gdb/doc/ChangeLog:
2015-09-15 Pedro Alves <palves@redhat.com>
PR remote/18965
* gdb.texinfo (Stop Reply Packets): Explain that vforkdone's 'r'
part indicates the thread ID of the parent process.
Nowadays, GDB only knows whether architecture supports hardware single
step or software single step (through gdbarch hook software_single_step),
and for a given instruction or instruction sequence, GDB knows how to
do single step (hardware or software). However, GDB doesn't know whether
the target supports hardware single step. It is possible that the
architecture doesn't support hardware single step, such as arm, but
the target supports, such as simulator. This was discussed in this
thread https://www.sourceware.org/ml/gdb/2009-12/msg00033.html before.
I encounter this problem for aarch64 multi-arch support. When aarch64
debugs arm program, gdbarch is arm, so software single step is still
used. However, the underneath linux kernel does support hardware
single step, so IWBN to use it.
This patch is to add a new target_ops hook to_can_do_single_step, and
only use it in arm_linux_software_single_step to decide whether or not
to use hardware single step. On the native aarch64 linux target, 1 is
returned. On other targets, -1 is returned. On the remote target, if
the target supports s and S actions in the vCont? reply, then target
can do single step. However, old GDBserver will send s and S in the
reply to vCont?, which will confuse new GDB. For example, old GDBserver
on arm-linux will send s and S in the reply to vCont?, but it doesn't
support hardware single step. On the other hand, new GDBserver, on
arm-linux for example, will not send s and S in the reply to vCont?,
but old GDB thinks it doesn't support vCont packet at all. In order
to address this problem, I add a new qSupported feature vContSupported,
which indicates GDB wants to know the supported actions in the reply
to vCont?, and qSupported response contains vContSupported if the
stub is able tell supported vCont actions in the reply of vCont?.
If the patched GDB talks with patched GDBserver on x86, the RSP traffic
is like this:
-> $qSupported:...+;vContSupported+
<- ...+;vContSupported+
...
-> $vCont?
<- vCont;c;C;t;s;S;r
then, GDB knows the stub can do single step, and may stop using software
single step even the architecture doesn't support hardware single step.
If the patched GDB talks with patched GDBserver on arm, the last vCont?
reply will become:
<- vCont;c;C;t
GDB thinks the target doesn't support single step, so it will use software
single step.
If the patched GDB talks with unpatched GDBserver, the RSP traffic is like
this:
-> $qSupported:...+;vContSupported+
<- ...+
...
-> $vCont?
<- vCont;c;C;t;s;S;r
although GDBserver returns s and S, GDB still thinks GDBserver may not
support single step because it doesn't support vContSupported.
If the unpatched GDB talks with patched GDBserver on x86, the RSP traffic
is like:
-> $qSupported:...+;
<- ...+;vContSupported+
...
-> $vCont?
<- vCont;c;C;t;s;S;r
Since GDB doesn't sent vContSupported in the qSupported feature, GDBserver
sends s and S regardless of the support of hardware single step.
gdb:
2015-09-15 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-nat.c (aarch64_linux_can_do_single_step): New
function.
(_initialize_aarch64_linux_nat): Install it to to_can_do_single_step.
* arm-linux-tdep.c (arm_linux_software_single_step): Return 0
if target_can_do_single_step returns 1.
* remote.c (struct vCont_action_support) <s, S>: New fields.
(PACKET_vContSupported): New enum.
(remote_protocol_features): New element for vContSupported.
(remote_query_supported): Append "vContSupported+".
(remote_vcont_probe): Remove support_s and support_S, use
rs->supports_vCont.s and rs->supports_vCont.S instead. Disable
vCont packet if c and C actions are not supported.
(remote_can_do_single_step): New function.
(init_remote_ops): Install it to to_can_do_single_step.
(_initialize_remote): Call add_packet_config_cmd.
* target.h (struct target_ops) <to_can_do_single_step>: New field.
(target_can_do_single_step): New macro.
* target-delegates.c: Re-generated.
gdb/gdbserver:
2015-09-15 Yao Qi <yao.qi@linaro.org>
* server.c (vCont_supported): New global variable.
(handle_query): Set vCont_supported to 1 if "vContSupported+"
matches. Append ";vContSupported+" to own_buf.
(handle_v_requests): Append ";s;S" to own_buf if target supports
hardware single step or vCont_supported is false.
(capture_main): Set vCont_supported to zero.
gdb/doc:
2015-09-15 Yao Qi <yao.qi@linaro.org>
* gdb.texinfo (General Query Packets): Add vContSupported to
tables of 'gdbfeatures' and 'stub features' supported in the
qSupported packet, as well as to the list containing stub
feature details.
This patch adds documentation of support for exec events on
extended-remote Linux targets.
gdb/ChangeLog:
* NEWS: Announce new remote packets for the exec-events
feature and the exec-events feature and associated commands.
gdb/doc/ChangeLog:
* gdb.texinfo (Remote Configuration): Add exec event
feature to table of packet settings.
(Stop Reply Packets): Add exec events to the list of stop
reasons.
(General Query Packets): Add exec events to tables of
'gdbfeatures' and 'stub features' supported in the qSupported
packet, as well as to the list containing stub feature
details.
Being able to force-disable the RSP multiprocess extensions is useful
for testing.
gdb/ChangeLog:
2015-08-24 Pedro Alves <palves@redhat.com>
* NEWS (New commands): Mention set/show remote
multiprocess-extensions-packet.
* remote.c (remote_query_supported): Only tell the server to use
the multiprocess extensions if the user hasn't force-disabled them
with "set remote multiprocess-extensions-packet off".
gdb/doc/ChangeLog:
2015-08-24 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Remote Configuration): Document the "set/show
remote multiprocess-extensions-packet" commands.
Support for target dbug/picobug/dink32/m32r/mon2000/ppcbug was just
removed, but support for ARM RDI, Sparclet, Sparclite, Z8000, target
r3900, target array, target sds, target op50n and target w89k had
already been removed many years ago. Drop it all in one go.
gdb/doc/ChangeLog:
2015-08-24 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Embedded Processors) <ARM>: Remove references to RDI.
<M32R>: Remove references to M32R/D.
<M68K>: Remove references to target dbug.
<MIPS Embedded>: Remove references to target r3900 and target
array.
<PowerPC Embedded>: Remove references to target dink32 and target
ppcbug, target sds
<PA, Sparclet, Sparclite, Z8000>: Delete nodes.
In commit 18989b3c56 I broke the creation
of gdb's info manual; I added a new section without adding a suitable
menu entry.
This commit adds the missing menu entry and fixes the build of gdb's
info manual.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB Files): Add 'File Caching' menu entry.
This patch adds a new debug flag bfd-cache, which when set to non-zero
produces debugging log messages relating to gdb's bfd cache.
gdb/ChangeLog:
* gdb_bfd.c (debug_bfd_cache): New variable.
(show_bfd_cache_debug): New function.
(gdb_bfd_open): Add debug logging.
(gdb_bfd_ref): Likewise.
(gdb_bfd_unref): Likewise.
(_initialize_gdb_bfd): Add new set/show command.
* NEWS: Mention new command.
gdb/doc/ChangeLog:
* gdb.texinfo (File Caching): Document "set/show debug bfd-cache".
In some rare maintainer cases it is desirable to be able to disable bfd
sharing. This patch adds new commands maintenance set/show commands for
bfd-sharing, allowing gdb's bfd cache to be turned off.
gdb/ChangeLog:
* gdb_bfd.c (bfd_sharing): New variable.
(show_bfd_sharing): New function.
(gdb_bfd_open): Check bfd_sharing variable.
(_initialize_gdb_bfd): Add new set/show command.
* NEWS: Mention new command.
gdb/doc/ChangeLog:
* gdb.texinfo (Maintenance Commands): Move documentation of "main
info bfds" to...
(File Caching): A New section. Outline bfd caching, and add new
description for "main set/show bfd-sharing".
The "source centric" /m option to the disassemble command is often
unhelpful, e.g., in the presence of optimized code.
This patch adds a /s modifier that is better.
For one, /m only prints instructions from the originating source file,
leaving out instructions from e.g., inlined functions from other files.
gdb/ChangeLog:
PR gdb/11833
* NEWS: Document new /s modifier for the disassemble command.
* cli/cli-cmds.c (disassemble_command): Add support for /s.
(_initialize_cli_cmds): Update online docs of disassemble command.
* disasm.c: #include "source.h".
(struct deprecated_dis_line_entry): Renamed from dis_line_entry.
All uses updated.
(dis_line_entry): New struct.
(hash_dis_line_entry, eq_dis_line_entry): New functions.
(allocate_dis_line_table): New functions.
(maybe_add_dis_line_entry, line_has_code_p): New functions.
(dump_insns): New arg end_pc. All callers updated.
(do_mixed_source_and_assembly_deprecated): Renamed from
do_mixed_source_and_assembly. All callers updated.
(do_mixed_source_and_assembly): New function.
(gdb_disassembly): Handle /s (DISASSEMBLY_SOURCE).
* disasm.h (DISASSEMBLY_SOURCE_DEPRECATED): Renamed from
DISASSEMBLY_SOURCE. All uses updated.
(DISASSEMBLY_SOURCE): New macro.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): New modes 4,5.
gdb/doc/ChangeLog:
* gdb.texinfo (Machine Code): Update docs for mixed source/assembly
disassembly.
(GDB/MI Data Manipulation): Update docs for new disassembly modes.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-disassemble.exp: Update.
* gdb.base/disasm-optim.S: New file.
* gdb.base/disasm-optim.c: New file.
* gdb.base/disasm-optim.h: New file.
* gdb.base/disasm-optim.exp: New file.
This patch adds documentation for explicit locations to both the
User Manual and gdb's online help system.
gdb/ChangeLog:
* NEWS: Mention explicit locations.
* breakpoint.c [LOCATION_HELP_STRING]: New macro.
[BREAK_ARGS_HELP]: Use LOCATION_HELP_STRING.
(_initialize_breakpoint): Update documentation for
"clear", "break", "trace", "strace", "ftrace", and "dprintf".
gdb/doc/ChangeLog:
* gdb.texinfo (Thread-Specific Breakpoints, Printing Source Lines):
Use "location(s)"instead of "linespec(s)".
(Specifying a Location): Rewrite.
Add subsections describing linespec, address, and explicit locations.
Add node/menu for each subsection.
(Source and Machine Code, C Preprocessor Macros)
(Create and Delete Trace points)
(Extensions for Ada Tasks): Use "location(s)" instead of "linespec(s)".
(Continuing at a Different Address): Remove "linespec" examples.
Add reference to "Specify a Location"
(The -break-insert Command): Rewrite. Add anchor.
Add reference to appropriate manual section discussing locations.
(The -dprintf-insert Command): Refer to -break-insert for
specification of 'location'.
gdb/testsuite/ChangeLog:
* gdb.base/help.exp: Update help_breakpoint_text.
This finally implements user-visible all-stop mode running with the
target_ops backend always in non-stop mode. This is a stepping stone
towards finer-grained control of threads, being able to do interesting
things like thread groups, associating groups with breakpoints, etc.
From the user's perspective, all-stop mode is really just a special
case of being able to stop and resume specific sets of threads, so it
makes sense to do this step first.
With this, even in all-stop, the target is no longer in charge of
stopping all threads before reporting an event to the core -- the core
takes care of it when it sees fit. For example, when "next"- or
"step"-ing, we can avoid stopping and resuming all threads at each
internal single-step, and instead only stop all threads when we're
about to present the stop to the user.
The implementation is almost straight forward, as the heavy lifting
has been done already in previous patches. Basically, we replace
checks for "set non-stop on/off" (the non_stop global), with calls to
a new target_is_non_stop_p function. In a few places, if "set
non-stop off", we stop all threads explicitly, and in a few other
places we resume all threads explicitly, making use of existing
methods that were added for teaching non-stop to step over breakpoints
without displaced stepping.
This adds a new "maint set target-non-stop on/off/auto" knob that
allows both disabling the feature if we find problems, and
force-enable it for development (useful when teaching a target about
this. The default is "auto", which means the feature is enabled if a
new target method says it should be enabled. The patch implements the
method in linux-nat.c, just for illustration, because it still returns
false. We'll need a few follow up fixes before turning it on by
default. This is a separate target method from indicating regular
non-stop support, because e.g., while e.g., native linux-nat.c is
close to regression free with all-stop-non-stop (with following
patches will fixing the remaining regressions), remote.c+gdbserver
will still need more fixing, even though it supports "set non-stop
on".
Tested on x86_64 Fedora 20, native, with and without "set displaced
off", and with and without "maint set target-non-stop on"; and also
against gdbserver.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* NEWS: Mention "maint set/show target-non-stop".
* breakpoint.c (update_global_location_list): Check
target_is_non_stop_p instead of non_stop.
* infcmd.c (attach_command_post_wait, attach_command): Likewise.
* infrun.c (show_can_use_displaced_stepping)
(can_use_displaced_stepping_p, start_step_over_inferior):
Likewise.
(internal_resume_ptid): New function.
(resume): Use it.
(proceed): Check target_is_non_stop_p instead of non_stop. If in
all-stop mode but the target is always in non-stop mode, start all
the other threads that are implicitly resumed too.
(for_each_just_stopped_thread, fetch_inferior_event)
(adjust_pc_after_break, stop_all_threads): Check
target_is_non_stop_p instead of non_stop.
(handle_inferior_event): Likewise. Handle detach-fork in all-stop
with the target always in non-stop mode.
(handle_signal_stop) <random signal>: Check target_is_non_stop_p
instead of non_stop.
(switch_back_to_stepped_thread): Check target_is_non_stop_p
instead of non_stop.
(keep_going_stepped_thread): Use internal_resume_ptid.
(stop_waiting): If in all-stop mode, and the target is in non-stop
mode, stop all threads.
(keep_going_pass): Likewise, when starting a new in-line step-over
sequence.
* linux-nat.c (get_pending_status, select_event_lwp)
(linux_nat_filter_event, linux_nat_wait_1, linux_nat_wait): Check
target_is_non_stop_p instead of non_stop.
(linux_nat_always_non_stop_p): New function.
(linux_nat_stop): Check target_is_non_stop_p instead of non_stop.
(linux_nat_add_target): Install linux_nat_always_non_stop_p.
* target-delegates.c: Regenerate.
* target.c (target_is_non_stop_p): New function.
(target_non_stop_enabled, target_non_stop_enabled_1): New globals.
(maint_set_target_non_stop_command)
(maint_show_target_non_stop_command): New functions.
(_initilize_target): Install "maint set/show target-non-stop"
commands.
* target.h (struct target_ops) <to_always_non_stop_p>: New field.
(target_non_stop_enabled): New declaration.
(target_is_non_stop_p): New declaration.
gdb/doc/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Maintenance Commands): Document "maint set/show
target-non-stop".
Indicate speculatively executed instructions with a leading '?'. We use the
space that is normally used for the PC prefix. In the case where the
instruction at the current PC had been executed speculatively before, the PC
prefix will be partially overwritten resulting in "?> ".
As a side-effect, the /p modifier to omit the PC prefix in the "record
instruction-history" command now uses a 3-space PC prefix " " in order to
have enough space for the speculative execution indication.
gdb/
* btrace.c (btrace_compute_ftrace_bts): Clear insn flags.
(pt_btrace_insn_flags): New.
(ftrace_add_pt): Call pt_btrace_insn_flags.
* btrace.h (btrace_insn_flag): New.
(btrace_insn) <flags>: New.
* record-btrace.c (btrace_insn_history): Print insn prefix.
* NEWS: Announce it.
doc/
* gdb.texinfo (Process Record and Replay): Document prefixing of
speculatively executed instructions in the "record instruction-history"
command.
testsuite/
* gdb.btrace/instruction_history.exp: Update.
* gdb.btrace/tsx.exp: New.
* gdb.btrace/tsx.c: New.
* lib/gdb.exp (skip_tsx_tests, skip_btrace_pt_tests): New.