Nowadays, TARGET_XFER_E_UNAVAILABLE isn't regarded as an error in
to_xfer_partial interface, so _E_ looks odd. This patch is to
replace TARGET_XFER_E_UNAVAILABLE with TARGET_XFER_UNAVAILABLE,
and change its value from -2 to 2. Since there is no comparison
on the value of 'enum target_xfer_status', so it should be safe.
gdb:
2014-02-24 Yao Qi <yao@codesourcery.com>
* target.h (enum target_xfer_status)
<TARGET_XFER_E_UNAVAILABLE>: Rename it to ...
<TARGET_XFER_UNAVAILABLE>: ... it with setting value 2
explicitly. New.
* corefile.c (memory_error_message): User updated.
* exec.c (section_table_read_available_memory): Likewise.
* record-btrace.c (record_btrace_xfer_partial): Likewise.
* target.c (target_xfer_status_to_string): Likewise.
(raw_memory_xfer_partial): Likewise.
(memory_xfer_partial_1, target_xfer_partial): Likewise.
* valops.c (read_value_memory): Likewise.
* exec.h: Update comments.
This patch removes macro TARGET_XFER_STATUS_ERROR_P, as Pedro pointed
out during patches review that TARGET_XFER_STATUS_ERROR_P tends to
be unnecessary.
gdb:
2014-02-24 Yao Qi <yao@codesourcery.com>
* target.h (TARGET_XFER_STATUS_ERROR_P): Remove.
* corefile.c (read_memory): Adjusted.
* target.c (target_write_with_progress): Adjusted.
This patch does the conversion of to_xfer_partial from
LONGEST (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len);
to
enum target_xfer_status (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len, ULONGEST *xfered_len);
It changes to_xfer_partial return the transfer status and the transfered
length by *XFERED_LEN. Generally, the return status has three stats,
- TARGET_XFER_OK,
- TARGET_XFER_EOF,
- TARGET_XFER_E_XXXX,
See the comments to them in 'enum target_xfer_status'. Note that
Pedro suggested not name TARGET_XFER_DONE, as it is confusing,
compared with "TARGET_XFER_OK". We finally name it TARGET_XFER_EOF.
With this change, GDB core can handle unavailable data in a convenient
way.
The rationale behind this change was mentioned here
https://sourceware.org/ml/gdb-patches/2013-10/msg00761.html
Consider an object/value like this:
0 100 150 200 512
DDDDDDDDDDDxxxxxxxxxDDDDDD...DDIIIIIIIIIIII..III
where D is valid data, and xxx is unavailable data, and I is beyond
the end of the object (Invalid). Currently, if we start the
xfer at 0, requesting, say 512 bytes, we'll first get back 100 bytes.
The xfer machinery then retries fetching [100,512), and gets back
TARGET_XFER_E_UNAVAILABLE. That's sufficient when you're either
interested in either having the whole of the 512 bytes available,
or erroring out. But, in this scenario, we're interested in
the data at [150,512). The problem is that the last
TARGET_XFER_E_UNAVAILABLE gives us no indication where to
start the read next. We'd need something like:
get me [0,512) >>>
<<< here's [0,100), *xfered_len is 100, returns TARGET_XFER_OK
get me [100,512) >>> (**1)
<<< [100,150) is unavailable, *xfered_len is 50, return TARGET_XFER_E_UNAVAILABLE.
get me [150,512) >>>
<<< here's [150,200), *xfered_len is 50, return TARGET_XFER_OK.
get me [200,512) >>>
<<< no more data, return TARGET_XFER_EOF.
This naturally implies pushing down the decision of whether
to return TARGET_XFER_E_UNAVAILABLE or something else
down to the target. (Which kinds of leads back to tfile
itself reading from RO memory from file (though we could
export a function in exec.c for that that tfile delegates to,
instead of re-adding the old code).
Beside this change, we also add a macro TARGET_XFER_STATUS_ERROR_P to
check whether a status is an error or not, to stop using "status < 0".
This patch also eliminates the comparison between status and 0.
No target implementations to to_xfer_partial adapts this new
interface. The interface still behaves as before.
gdb:
2014-02-11 Yao Qi <yao@codesourcery.com>
* target.h (enum target_xfer_error): Rename to ...
(enum target_xfer_status): ... it. New. All users updated.
(enum target_xfer_status) <TARGET_XFER_OK>, <TARGET_XFER_EOF>:
New.
(TARGET_XFER_STATUS_ERROR_P): New macro.
(target_xfer_error_to_string): Remove declaration.
(target_xfer_status_to_string): Declare.
(target_xfer_partial_ftype): Adjust it.
(struct target_ops) <to_xfer_partial>: Return
target_xfer_status. Add argument xfered_len. Update
comments.
* target.c (target_xfer_error_to_string): Rename to ...
(target_xfer_status_to_string): ... it. New. All callers
updated.
(target_read_live_memory): Likewise. Call target_xfer_partial
instead of target_read.
(memory_xfer_live_readonly_partial): Return
target_xfer_status. Add argument xfered_len.
(raw_memory_xfer_partial): Likewise.
(memory_xfer_partial_1): Likewise.
(memory_xfer_partial): Likewise.
(target_xfer_partial): Likewise. Check *XFERED_LEN is set
properly. Update debug message.
(default_xfer_partial, current_xfer_partial): Likewise.
(target_write_partial): Likewise.
(target_read_partial): Likewise. All callers updated.
(read_whatever_is_readable): Likewise.
(target_write_with_progress): Likewise.
(target_read_alloc_1): Likewise.
* aix-thread.c (aix_thread_xfer_partial): Likewise.
* auxv.c (procfs_xfer_auxv): Likewise.
(ld_so_xfer_auxv, memory_xfer_auxv): Likewise.
* bfd-target.c (target_bfd_xfer_partial): Likewise.
* bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
* bsd-uthread.c (bsd_uthread_xfer_partia): Likewise.
* corefile.c (read_memory): Adjust.
* corelow.c (core_xfer_partial): Likewise.
* ctf.c (ctf_xfer_partial): Likewise.
* darwin-nat.c (darwin_read_dyld_info): Likewise. All callers
updated.
(darwin_xfer_partial): Likewise.
* exec.c (section_table_xfer_memory_partial): Likewise. All
callers updated.
(exec_xfer_partial): Likewise.
* exec.h (section_table_xfer_memory_partial): Update
declaration.
* gnu-nat.c (gnu_xfer_memory): Likewise. Assert 'res' is not
negative.
(gnu_xfer_partial): Likewise.
* ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise.
(ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise.
(ia64_hpux_xfer_solib_got): Likewise.
* inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. Change
type of 'partial_len' to ULONGEST.
* inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
* linux-nat.c (linux_xfer_siginfo ): Likewise.
(linux_nat_xfer_partial): Likewise.
(linux_proc_xfer_partial, linux_xfer_partial): Likewise.
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise.
* monitor.c (monitor_xfer_memory): Likewise.
(monitor_xfer_partial): Likewise.
* procfs.c (procfs_xfer_partial): Likewise.
* record-btrace.c (record_btrace_xfer_partial): Likewise.
* record-full.c (record_full_xfer_partial): Likewise.
(record_full_core_xfer_partial): Likewise.
* remote-sim.c (gdbsim_xfer_memory): Likewise.
(gdbsim_xfer_partial): Likewise.
* remote.c (remote_write_bytes_aux): Likewise. All callers
updated.
(remote_write_bytes, remote_read_bytes): Likewise. All
callers updated.
(remote_flash_erase): Likewise. All callers updated.
(remote_write_qxfer): Likewise. All callers updated.
(remote_read_qxfer): Likewise. All callers updated.
(remote_xfer_partial): Likewise.
* rs6000-nat.c (rs6000_xfer_partial): Likewise.
(rs6000_xfer_shared_libraries): Likewise.
* sol-thread.c (sol_thread_xfer_partial): Likewise.
(sol_thread_xfer_partial): Likewise.
* sparc-nat.c (sparc_xfer_wcookie): Likewise.
(sparc_xfer_partial): Likewise.
* spu-linux-nat.c (spu_proc_xfer_spu): Likewise. All callers
updated.
(spu_xfer_partial): Likewise.
* spu-multiarch.c (spu_xfer_partial): Likewise.
* tracepoint.c (tfile_xfer_partial): Likewise.
* windows-nat.c (windows_xfer_memory): Likewise.
(windows_xfer_shared_libraries): Likewise.
(windows_xfer_partial): Likewise.
* valprint.c: Replace 'target_xfer_error' with
'target_xfer_status' in comments.
This patch adds a local variable exception of type 'enum errors' and
pass it to throw_error, because 'err' is of type
'enum target_xfer_error', and we're abusing it to store an 'enum errors'.
gdb:
2014-02-07 Yao Qi <yao@codesourcery.com>
* corefile.c (memory_error): Get 'exception' from ERR and pass
'exception' to throw_error.
GDB is able to cache memory accesses requested in target_read_code,
so target_read_code is more efficient than general target_read_memory.
This patch uses target_read_code and its variants to read target
memory in the functions related to i386_skip_prologue. It improves
the performance when doing 'b foo' (foo is a function) in remote
debugging.
Nowadays, when we set a breakpoint on function f1, GDB will fetch the
code in f1 to determine the start of the function body (say skip the
prologue), it requests read from target many times. With this patch
applied, the number of RSP 'm' packets are reduced.
gdb:
2013-12-10 Yao Qi <yao@codesourcery.com>
* corefile.c (read_code): New function.
(read_code_integer): New function.
(read_code_unsigned_integer): New function.
* gdbcore.h (read_code): Declare.
(read_code_integer): Declare.
(read_code_unsigned_integer): Declare.
* i386-tdep.c (i386_follow_jump): Call target_read_code instead
of target_read_memory. Call read_code_unsigned_integer instead
of read_memory_unsigned_integer.
(i386_analyze_struct_return): Likewise.
(i386_skip_probe): Likewise.
(i386_analyze_stack_align): Likewise.
(i386_match_pattern): Likewise.
(i386_skip_noop): Likewise.
(i386_analyze_frame_setup): Likewise.
(i386_analyze_register_saves): Likewise.
(i386_skip_prologue): Likewise.
(i386_skip_main_prologue): Likewise.
(i386_frame_cache_1): Likewise.
This patch is purely mechanical. It removes gdb_stat.h and changes
the code to use sys/stat.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_stat.h: Remove.
* ada-lang.c: Use sys/stat.h, not gdb_stat.h.
* common/filestuff.c: Use sys/stat.h, not gdb_stat.h.
* common/linux-osdata.c: Use sys/stat.h, not gdb_stat.h.
* corefile.c: Use sys/stat.h, not gdb_stat.h.
* ctf.c: Use sys/stat.h, not gdb_stat.h.
* darwin-nat.c: Use sys/stat.h, not gdb_stat.h.
* dbxread.c: Use sys/stat.h, not gdb_stat.h.
* dwarf2read.c: Use sys/stat.h, not gdb_stat.h.
* exec.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/linux-low.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/remote-utils.c: Use sys/stat.h, not gdb_stat.h.
* inf-child.c: Use sys/stat.h, not gdb_stat.h.
* jit.c: Use sys/stat.h, not gdb_stat.h.
* linux-nat.c: Use sys/stat.h, not gdb_stat.h.
* m68klinux-nat.c: Use sys/stat.h, not gdb_stat.h.
* main.c: Use sys/stat.h, not gdb_stat.h.
* mdebugread.c: Use sys/stat.h, not gdb_stat.h.
* mi/mi-cmd-env.c: Use sys/stat.h, not gdb_stat.h.
* nto-tdep.c: Use sys/stat.h, not gdb_stat.h.
* objfiles.c: Use sys/stat.h, not gdb_stat.h.
* procfs.c: Use sys/stat.h, not gdb_stat.h.
* remote-fileio.c: Use sys/stat.h, not gdb_stat.h.
* remote-mips.c: Use sys/stat.h, not gdb_stat.h.
* remote.c: Use sys/stat.h, not gdb_stat.h.
* rs6000-nat.c: Use sys/stat.h, not gdb_stat.h.
* sol-thread.c: Use sys/stat.h, not gdb_stat.h.
* solib-spu.c: Use sys/stat.h, not gdb_stat.h.
* source.c: Use sys/stat.h, not gdb_stat.h.
* symfile.c: Use sys/stat.h, not gdb_stat.h.
* symmisc.c: Use sys/stat.h, not gdb_stat.h.
* symtab.c: Use sys/stat.h, not gdb_stat.h.
* top.c: Use sys/stat.h, not gdb_stat.h.
* xcoffread.c: Use sys/stat.h, not gdb_stat.h.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
target_read_memory & friends build on top of target_read (thus on top
of the target_xfer machinery), but turn all errors to EIO, an errno
value. I think we'd better convert all these to return a
target_xfer_error too, like target_xfer_partial in a previous patch.
The patch starts by doing that.
(The patch does not add a enum target_xfer_error value for '0'/no
error, and likewise does not change the return type of several of
these functions to enum target_xfer_error, because different functions
return '0' with different semantics.)
I audited the tree for memory_error calls, EIO checks, places where
GDB hardcodes 'errno = EIO', and also for strerror calls. What I
found is that nowadays there's really no need to handle random errno
values, other than the EIOs gdb itself hardcodes. No doubt errno
values would appear in common code back in the day when
target_xfer_memory was the main interface to access memory, but
nowadays, any errno value that deprecated interface could return is
just absorved by default_xfer_partial:
else if (xfered == 0 && errno == 0)
/* "deprecated_xfer_memory" uses 0, cross checked against
ERRNO as one indication of an error. */
return 0;
else
return -1;
There are two places in the code that check for EIO and print "out of
bounds", and defer to strerror for other errors. That's
c-lang.c:c_get_string, and valprint.c.:val_print_string. AFAICT, the
strerror branch can never be reached nowadays, as the only error
possible to get at those points is EIO, given that it's GDB itself
that set that errno value (in target_read_memory, etc.).
breakpoint.c:insert_bp_location always prints the error val as if an
errno, returned by target_insert_breakpoint, with strerr. Now the
error here is either always EIO for mem-break.c targets (again
hardcoded by the target_read_memory/target_write_memory functions), so
this always prints "Input/output error" or similar (depending on
host), or, for remote targets (and probably others), this gem:
Error accessing memory address 0x80200400: Unknown error -1.
This patch makes these 3 places print the exact same error
memory_error prints. This changes output, but I think this is better,
for making memory error output consistent with other commands, and, it
means we have a central place to tweak for memory errors.
E.g., this changes:
Cannot insert breakpoint 1.
Error accessing memory address 0x5fc660: Input/output error.
to:
Cannot insert breakpoint 1.
Cannot access memory at address 0x5fc660
Which I find pretty much acceptable.
Surprisingly, only py-prettyprint.exp had a regression, for needing an
adjustment. I also grepped the testsuite for the old errors, and
found no other hits.
Now that errno values aren't used anywhere in any of these memory
access related routines, I made memory_error itself take a
target_xfer_error instead of an errno. The new
target_xfer_memory_error function added recently is no longer
necessary, and is thus removed.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2013-10-09 Pedro Alves <palves@redhat.com>
* breakpoint.c (insert_bp_location): Use memory_error_message to
build the memory error string.
* c-lang.c: Include "gdbcore.h".
(c_get_string): Use memory_error to throw error.
(target_xfer_memory_error): Delete.
(memory_error_message): New, factored out from
target_xfer_memory_error.
(memory_error): Change parameter type to target_xfer_error.
Rewrite.
(read_memory): Use memory_error instead of
target_xfer_memory_error.
* gdbcore.h: Include "target.h".
(memory_error): Change parameter type to target_xfer_error.
(memory_error_message): Declare function.
* target.c (target_read_memory, target_read_stack)
(target_write_memory, target_write_raw_memory): Return
TARGET_XFER_E_IO on error. Adjust comments.
(get_target_memory): Pass TARGET_XFER_E_IO to memory_error,
instead of EIO.
* target.h (target_read, target_insert_breakpoint)
(target_remove_breakpoint): Adjust comments.
* valprint.c (partial_memory_read): Rename parameter, and adjust
comment.
(val_print_string): Use memory_error_message to build the memory
error string.
gdb/testsuite/
2013-10-09 Pedro Alves <palves@redhat.com>
* gdb.python/py-prettyprint.exp (run_lang_tests): Adjust expected
output.
In entry-values.exp, we have a test where the entry value of 'j' is
unavailable, so it is expected that printing j@entry yields
"<unavailable>". However, the actual output is:
(gdb) frame
#0 0x0000000000400540 in foo (i=0, i@entry=2, j=2, j@entry=<error reading variable: Cannot access memory at address 0x6009e8>)
The error is thrown here:
#0 throw_it (reason=RETURN_ERROR, error=MEMORY_ERROR, fmt=0x8cd550 "Cannot access memory at address %s", ap=0x7fffffffc8e8) at ../../src/gdb/exceptions.c:373
#1 0x00000000005e2f9c in throw_error (error=MEMORY_ERROR, fmt=0x8cd550 "Cannot access memory at address %s") at ../../src/gdb/exceptions.c:422
#2 0x0000000000673a5f in memory_error (status=5, memaddr=6293992) at ../../src/gdb/corefile.c:204
#3 0x0000000000673aea in read_memory (memaddr=6293992, myaddr=0x7fffffffca60 "\200\316\377\377\377\177", len=4) at ../../src/gdb/corefile.c:223
#4 0x00000000006784d1 in dwarf_expr_read_mem (baton=0x7fffffffcd50, buf=0x7fffffffca60 "\200\316\377\377\377\177", addr=6293992, len=4) at ../../src/gdb/dwarf2loc.c:334
#5 0x000000000067645e in execute_stack_op (ctx=0x1409480, op_ptr=0x7fffffffce87 "\237<\005@", op_end=0x7fffffffce88 "<\005@") at ../../src/gdb/dwarf2expr.c:1045
#6 0x0000000000674e29 in dwarf_expr_eval (ctx=0x1409480, addr=0x7fffffffce80 "\003\350\t`", len=8) at ../../src/gdb/dwarf2expr.c:364
#7 0x000000000067c5b2 in dwarf2_evaluate_loc_desc_full (type=0x10876d0, frame=0xd8ecc0, data=0x7fffffffce80 "\003\350\t`", size=8, per_cu=0xf24c40, byte_offset=0)
at ../../src/gdb/dwarf2loc.c:2236
#8 0x000000000067cc65 in dwarf2_evaluate_loc_desc (type=0x10876d0, frame=0xd8ecc0, data=0x7fffffffce80 "\003\350\t`", size=8, per_cu=0xf24c40)
at ../../src/gdb/dwarf2loc.c:2407
#9 0x000000000067a5d4 in dwarf_entry_parameter_to_value (parameter=0x13a7960, deref_size=18446744073709551615, type=0x10876d0, caller_frame=0xd8ecc0, per_cu=0xf24c40)
at ../../src/gdb/dwarf2loc.c:1160
#10 0x000000000067a962 in value_of_dwarf_reg_entry (type=0x10876d0, frame=0xd8de70, kind=CALL_SITE_PARAMETER_DWARF_REG, kind_u=...) at ../../src/gdb/dwarf2loc.c:1310
#11 0x000000000067aaca in value_of_dwarf_block_entry (type=0x10876d0, frame=0xd8de70, block=0xf1c2d4 "Q", block_len=1) at ../../src/gdb/dwarf2loc.c:1363
#12 0x000000000067e7c9 in locexpr_read_variable_at_entry (symbol=0x13a7540, frame=0xd8de70) at ../../src/gdb/dwarf2loc.c:3326
#13 0x00000000005daab6 in read_frame_arg (sym=0x13a7540, frame=0xd8de70, argp=0x7fffffffd0e0, entryargp=0x7fffffffd100) at ../../src/gdb/stack.c:362
#14 0x00000000005db384 in print_frame_args (func=0x13a7470, frame=0xd8de70, num=-1, stream=0xea3890) at ../../src/gdb/stack.c:669
#15 0x00000000005dc338 in print_frame (frame=0xd8de70, print_level=1, print_what=SRC_AND_LOC, print_args=1, sal=...) at ../../src/gdb/stack.c:1199
#16 0x00000000005db8ee in print_frame_info (frame=0xd8de70, print_level=1, print_what=SRC_AND_LOC, print_args=1) at ../../src/gdb/stack.c:851
#17 0x00000000005da2bb in print_stack_frame (frame=0xd8de70, print_level=1, print_what=SRC_AND_LOC) at ../../src/gdb/stack.c:169
#18 0x00000000005de236 in frame_command (level_exp=0x0, from_tty=1) at ../../src/gdb/stack.c:2265
dwarf2_evaluate_loc_desc_full (frame #7) knows to handle
NOT_AVAILABLE_ERROR errors, but read_memory always throws
a generic error.
Presently, only the value machinery knows to handle unavailable
memory. We need to push the awareness down to the target_xfer layer,
making it return a finer grained error indication. We can only return
a generic -1 nowadays, which leaves the upper layers with no clue on
why the xfer failed. Use target_xfer_partial directly, rather than
propagating the error through target_read_memory so as to get a better
address to display in the error message.
(target_read_memory & friends build on top of target_read (thus the
target_xfer machinery), but turn all errors to EIO, an errno value. I
think this is a mistake, and we'd better convert all these to return a
target_xfer_error too, but that can be done separately. I looked
around a bit over memory_error calls, and the need to handle random
errno values, other than the EIOs gdb itself hardcodes, probably comes
(only) from deprecated_xfer_memory, which uses errno for error
indication, but I didn't look exhaustively. We should really get rid
of deprecated_xfer_memory and of passing down errno values as error
indication in target_read & friends methods).
Tested on x86_64 Fedora 17, native and gdbserver. Fixes the test in
the PR, which will be added to the testsuite later.
gdb/
2013-08-22 Pedro Alves <palves@redhat.com>
PR gdb/15871
* corefile.c (target_xfer_memory_error): New function.
(memory_error): Defer EIO to target_memory_error.
(read_memory): Use target_xfer_partial, and handle finer-grained
target xfer errors.
* target.c (target_xfer_error_to_string): New function.
(memory_xfer_partial_1): If memory is known to be
unavailable, return TARGET_XFER_E_UNAVAILABLE instead of -1.
(target_xfer_partial): Make extern.
* target.h (enum target_xfer_error): New enum.
(target_xfer_error_to_string): Declare function.
(target_xfer_partial): Declare function.
(struct target_ops) <xfer_partial>: Adjust describing comment.
This is sort of a continuation of Keith's parse_exp_1 constification
patch. It started out by undoing these bits:
@@ -754,9 +754,12 @@ validate_actionline (char **line, struct
tmp_p = p;
for (loc = t->base.loc; loc; loc = loc->next)
{
- p = tmp_p;
- exp = parse_exp_1 (&p, loc->address,
+ const char *q;
+
+ q = tmp_p;
+ exp = parse_exp_1 (&q, loc->address,
block_for_pc (loc->address), 1);
+ p = (char *) q;
and progressively making more things const upwards, fixing fallout,
rinse repeat, until GDB built again (--enable-targets=all).
That ended up constifying lookup_cmd/add_cmd and (lots of) friends,
and the completers.
I didn't try to constify the command hooks themselves, because I know
upfront there are commands that write to the command string argument,
and I think I managed to stop at a nice non-hacky split point already.
I think the only non-really-super-obvious changes are
tracepoint.c:validate_actionline, and tracepoint.c:trace_dump_actions.
The rest is just mostly about 'char *' => 'const char *', 'char **'=>
'const char **', and the occasional (e.g., deprecated_cmd_warning)
case of 'char **'=> 'const char *', where/when I noticed that nothing
actually cares about the pointer to pointer output.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2013-03-13 Pedro Alves <palves@redhat.com>
* ada-lang.c (struct add_partial_datum) <text, text0, word>: Make
fields const.
(ada_make_symbol_completion_list): Make "text0" parameter const.
* ax-gdb.c (agent_eval_command_one): Make "exp" parameter const.
* breakpoint.c (condition_completer): Make "text" and "word"
parameters const. Adjust.
(check_tracepoint_command): Adjust to validate_actionline
prototype change.
(catch_syscall_completer): Make "text" and "word" parameters
const.
* cli/cli-cmds.c (show_user): Make "comname" local const.
(valid_command_p): Make "command" parameter const.
(alias_command): Make "alias_prefix" and "command_prefix" locals
const.
* cli/cli-decode.c (add_cmd): Make "name" parameter const.
(add_alias_cmd): Make "name" and "oldname" parameters const.
Adjust. No longer make copy of OLDNAME.
(add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd)
(add_setshow_cmd_full, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_string_noescape_cmd)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd)
(delete_cmd, add_info, add_info_alias, add_com, add_com_alias):
Make "name" parameter const.
(help_cmd): Rename "command" parameter to "arg". New const local
"command".
(find_cmd): Make "command" parameter const.
(lookup_cmd_1): Make "text" parameter pointer to const. Adjust to
deprecated_cmd_warning prototype change.
(undef_cmd_error): Make "cmdtype" parameter const.
(lookup_cmd): Make "line" parameter const.
(deprecated_cmd_warning): Change type of "text" parameter to
pointer to const char, from pointer to pointer to char. Adjust.
(lookup_cmd_composition): Make "text" parameter const.
(complete_on_cmdlist, complete_on_enum): Make "text" and "word"
parameters const.
* cli/cli-decode.h (struct cmd_list_element) <name>: Make field
const.
* cli/cli-script.c (validate_comname): Make "tem" local const.
(define_command): New const local "tem_c". Use it in calls to
lookup_cmd.
(document_command): Make "tem" and "comfull" locals const.
(show_user_1): Make "prefix" and "name" parameters const.
* cli-script.h (show_user_1): Make "prefix" and "name" parameters
const.
* command.h (add_cmd, add_alias_cmd, add_prefix_cmd)
(add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1)
(deprecated_cmd_warning, lookup_cmd_composition, add_com)
(add_com_alias, add_info, add_info_alias, complete_on_cmdlist)
(complete_on_enum, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_string_noescape_cmd)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
Change prototypes, constifying strings.
* completer.c (noop_completer, filename_completer): Make "text"
and "prefix" parameters const.
(location_completer, expression_completer)
(complete_line_internal): Make "text" and "prefix" parameters
const and adjust.
(command_completer, signal_completer): Make "text" and "prefix"
parameters const.
* completer.h (noop_completer, filename_completer)
(expression_completer, location_completer, command_completer)
(signal_completer): Change prototypes.
* corefile.c (complete_set_gnutarget): Make "text" and "word"
parameters const.
* cp-abi.c (cp_abi_completer): Likewise.
* expression.h (parse_expression_for_completion): Change
prototype.
* f-lang.c (f_make_symbol_completion_list): Make "text" and "word"
parameters const.
* infcmd.c (_initialize_infcmd): Make "cmd_name" local const.
* infrun.c (handle_completer): Make "text" and "word" parameters
const.
* interps.c (interpreter_completer): Make "text" and "word"
parameters const.
* language.h (struct language_defn)
<la_make_symbol_completion_list>: Make "text" and "word"
parameters const.
* parse.c (parse_exp_1): Move const hack to parse_exp_in_context.
(parse_exp_in_context): Rename to ...
(parse_exp_in_context_1): ... this.
(parse_exp_in_context): Reimplement, with const hack from
parse_exp_1.
(parse_expression_for_completion): Make "string" parameter const.
* printcmd.c (decode_format): Make "string_ptr" parameter pointer
to pointer to const char. Adjust.
(print_command_1): Make "exp" parameter const.
(output_command): Rename to ...
(output_command_const): ... this. Make "exp" parameter const.
(output_command): Reimplement.
(x_command): Adjust.
(display_command): Rename "exp" parameter to "arg". New "exp"
local, const version of "arg".
* python/py-auto-load.c (gdbpy_initialize_auto_load): Make
"cmd_name" local const.
* python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree
call.
(cmdpy_completer): Make "text" and "word" parameters const.
(gdbpy_parse_command_name): Make "prefix_text2" local const.
* python/py-param.c (add_setshow_generic): Make "tmp_name" local
const.
* remote.c (_initialize_remote): Make "cmd_name" local const.
* symtab.c (language_search_unquoted_string): Make "text" and "p"
parameters const. Adjust.
(completion_list_add_fields): Make "sym_text", "text" and "word"
parameters const.
(struct add_name_data) <sym_text, text, word>: Make fields const.
(default_make_symbol_completion_list_break_on): Make "text" and
"word" parameters const. Adjust locals.
(default_make_symbol_completion_list)
(make_symbol_completion_list, make_symbol_completion_type)
(make_symbol_completion_list_fn): Make "text" and "word"
parameters const.
(make_file_symbol_completion_list): Make "text", "word" and
"srcfile" parameters const. Adjust locals.
(add_filename_to_list): Make "text" and "word" parameters const.
(struct add_partial_filename_data) <text, word>: Make fields
const.
(make_source_files_completion_list): Make "text" and "word"
parameters const.
* symtab.h (default_make_symbol_completion_list_break_on)
(default_make_symbol_completion_list, make_symbol_completion_list)
(make_symbol_completion_type enum type_code)
(make_symbol_completion_list_fn make_file_symbol_completion_list)
(make_source_files_completion_list): Change prototype.
* top.c (execute_command): Adjust to pass pointer to pointer to
const char to lookup_cmd, and to deprecated_cmd_warning prototype
change.
(set_verbose): Make "cmdname" local const.
* tracepoint.c (decode_agent_options): Make "exp" parameter const,
and adjust.
(validate_actionline): Make "line" parameter a pointer to const
char, and adjust.
(encode_actions_1): Make "action_exp" local const, and adjust.
(encode_actions): Adjust.
(replace_comma): Delete.
(trace_dump_actions): Make "action_exp" and "next_comma" locals
const, and adjust. Don't frob the action string while splitting
it at commas. Instead, make a copy of each split substring in
turn.
(trace_dump_command): Adjust to validate_actionline prototype
change.
* tracepoint.h (decode_agent_options, decode_agent_options)
(encode_actions, validate_actionline): Change prototypes.
* valprint.h (output_command): Delete declaration.
(output_command_const): Declare.
* value.c (function_destroyer): Cast const away in xfree call.
$ make WERROR_CFLAGS="-Wpointer-sign -Werror" corefile.o -k 2>&1 1>/dev/null
../../src/gdb/corefile.c: In function ‘read_memory_string’:
../../src/gdb/corefile.c:334:7: error: pointer targets in passing argument 2 of ‘read_memory’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/corefile.c:217:1: note: expected ‘gdb_byte *’ but argument is of type ‘char *’
Functions that take or return ascii-ish string arguments usually use
char* for parameters/return. That means that at points we call into
target methods that work with binary blobs, we need casts to
gdb_byte*.
gdb/
2013-03-07 Pedro Alves <palves@redhat.com>
* corefile.c (read_memory_string): Cast pointer to gdb_byte* in
call.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
The body of this function has been commented out since Jul 1999, and
thus seems unnecessary. While at it, remove some commented out code
that seems to be related to the function being deleted.
gdb/ChangeLog:
* corefile.c (close_exec_file): Delete.
(reopen_exec_file): Remove commented out code that seems related
to close_exec_file, which is being deleted here.
* inferior.h (close_exec_file): Delete.
* fork-child.c (fork_inferior): Remove call to fork_inferior.
Make core files the process_stratum.
* corefile.c (core_target): New variable.
(core_file_command): Remove variable t, use core_target.
* corelow.c (core_ops): Make it static.
(init_core_ops): Change to process_stratum. Initialize CORE_TARGET.
* defs.h (make_cleanup_unpush_target): New prototype.
* gdbarch.h: Regenerate.
* gdbarch.sh (core_pid_to_str): Remove core_stratum from its comment.
* gdbcore.h (core_target): New declaration.
* inf-ptrace.c (inf_ptrace_create_inferior, inf_ptrace_attach): New
variables ops_already_pushed and back_to. Use push_target,
make_cleanup_unpush_target and discard_cleanups calls.
* record.c (record_open): Replace core_stratum by a core_bfd check.
* target.c (target_is_pushed): New function.
(find_core_target): Remove.
* target.h (enum strata) <core_stratum>: Remove.
(target_is_pushed): New declaration.
(find_core_target): Remove declaration.
* tracepoint.c (init_tfile_ops) <to_stratum>: Remove comment.
* utils.c (do_unpush_target, make_cleanup_unpush_target): New functions.
gdb/doc/
Make core files the process_stratum.
* gdb.texinfo (Active Targets): Remove core_stratum. Include
record_stratum example.
gdb/testsuite/
Make core files the process_stratum.
* gdb.base/corefile.exp (run: load core again)
(run: sanity check we see the core file, run: with core)
(run: core file is cleared, attach: load core again)
(attach: sanity check we see the core file, attach: with core)
(attach: core file is cleared): New tests.
* gdb.base/coremaker.c (main): New parameters. Implement "sleep" argv.
* charset.c: White space.
* c-lang.c: White space.
* cli-out.c: White space.
* coffread.c: White space.
* complaints.c: White space.
* completer.c: White space.
* corefile.c: White space.
* corelow.c: White space.
* cp-abi.c: White space.
* cp-namespace.c: White space.
* cp-support.c: White space.
* cp-valprint.c: White space.
* c-typeprint.c: White space.
* c-valprint.c: White space.
* NEWS: Add note on new "set stack-cache" option.
* corefile.c (read_stack): New function.
* dcache.c (dcache_struct): New member ptid.
(dcache_enable_p): Mark as obsolete.
(show_dcache_enabled_p): Flag option as deprecated.
(dcache_invalidate): Update ptid.
(dcache_invalidate_line): New function.
(dcache_read_line): No longer check cacheable attribute, stack
accesses get cached despite attribute.
(dcache_init): Set ptid.
(dcache_xfer_memory): Flush cache if from different ptid than before.
Update cache after write.
(dcache_update): New function.
(dcache_info): Report ptid.
(_initialize_dcache): Update text for `remotecache' to indicate it
is obsolete.
* dcache.h (dcache_update): Declare.
* dwarf2loc.c (dwarf2_evaluate_loc_desc): Mark values on stack with
set_value_stack.
* frame-unwind.c (frame_unwind_got_memory): Ditto.
* gdbcore.h (read_stack): Declare.
* memattr.c (mem_enable_command): Call target_dcache_invalidate
instead of dcache_invalidate.
(mem_disable_command, mem_delete_command): Ditto.
* target.c (stack_cache_enabled_p_1): New static global.
(stack_cache_enabled_p): New static global.
(set_stack_cache_enabled_p): New function.
(show_stack_cache_enabled_p): New function.
(target_dcache): Make static.
(target_dcache_invalidate): New function.
(target_load, target_resume): Call target_dcache_invalidate
instead of dcache_invalidate.
(memory_xfer_partial): New arg object, all callers updated.
Check for existing inferior before calling dcache routines.
When writing non-TARGET_OBJECT_STACK_MEMORY, notify dcache.
(target_xfer_partial): Call memory_xfer_partial for
TARGET_OBJECT_STACK_MEMORY.
(target_read_stack): New function.
(initialize_targets): Install new option `stack-cache'.
* target.h: Remove #include of dcache.h.
(enum target_object): New value TARGET_OBJECT_STACK_MEMORY.
(target_dcache): Delete.
(target_dcache_invalidate): Declare.
(target_read_stack): Declare.
* top.c (prepare_execute_command): New function.
(execute_command): Call prepare_execute_command
instead of free_all_values.
* top.h (prepare_execute_command): Declare.
* valops.c (get_value_at): New function.
(value_at): Guts moved to get_value_at.
(value_at_lazy): Similarly.
(value_fetch_lazy): Call read_stack for stack values.
* value.c (struct value): New member `stack'.
(value_stack, set_value_stack): New functions.
* value.h (value_stack, set_value_stack): Declare.
* mi/mi-main.c (mi_cmd_execute): Call prepare_execute_command
instead of free_all_values.
doc/
* gdb.texinfo (Caching Data of Remote Targets): Update text.
Mark `set/show remotecache' options as obsolete.
Document new `set/show stack-cache' option.
Update text for `info dcache'.
* varobj.c (varobj_invalidate): Unconditionally free
all_rootvarobj.
* symfile.c (syms_from_objfile): Free local_addr when returning
normally.
* exec.c (exec_file_attach): Do cleanups before returning.
(exec_file_command): Likewise.
* corefile.c (reopen_exec_file): Do cleanups before returning.
* breakpoint.c (insert_breakpoint_locations): Do cleanups before
returning.
(do_vec_free): New function.
(update_global_location_list): Make a cleanup for old_locations.
Do cleanups before returning. Remove unused variable 'e'.
(find_condition_and_thread): Free result of parsing the
expression.
(print_it_typical): Do cleanups before returning.
(breakpoint_re_set_one): Always free sals.sals.
* corefile.c (reopen_exec_file): Use exec_bfd_mtime.
* exec.c (exec_bfd_mtime): Define.
(exec_close): Clear it.
(exec_file_attach): Set it.
* gdbcore.h (exec_bfd_mtime): Declare.
* source.c (find_source_lines): Do not use bfd_get_mtime.
* corefile.c (reopen_exec_file): Only check for an open exec file.
Use exec_file_attach.
* exec.c (exec_open): Make static.
(exec_file_command): Don't use target_preopen. Query directly about
changing the file.
* gdbcore.h (exec_open): Remove prototype.
gdb/testsuite/
* gdb.base/completion.exp: Update for change in "file" behavior.
* gdb.stabs/weird.exp: Likewise.
* lib/mi-support.exp (mi_gdb_file_cmd): Likewise.
* lib/gdb.exp (gdb_file_cmd): Likewise. Kill the program explicitly.
Yao Qi