t_double_values to initialize the FPU before inferior calls are made.
* gdb.base/callfuncs.exp: Test for register preservation after calling
inferior functions. Add tests for continuining, finishing and
returning from a stop in a call dummy.
* config/gdbserver.exp: Rewritten from the ground up, to make it
compatible with the current dejagnu tree, and to make it work with
the new "gdbserver" in libremote.
* lib/gdb.exp (gdb_skip_float_test): New proc. Skip test if
no floating point support.
(gdb_skip_stdio_test): New proc. Skip test if no stdio support.
* gdb.base/call-ar-st.exp: Use above procs to skip tests.
* gdb.base/call-rt-st.exp: Ditto.
* gdb.base/call-strs.exp: Ditto.
* gdb.base/sizeof.exp (check_sizeof): Skip if no printf support.
* gdb.base/varargs.exp: Skip entire test if no printf support.
* gdb.base/ending-run.exp (Step to return): Skip if no printf supt.
* gdb.base/shlib-call.exp: Skip several tests if no printf support.
* gdb.base/recurse.exp: Run tests for all targets.
* gdb.base/so-impl-ld.exp: Added wildcard to handle the
gnu-oldld case on ARM.
* gdb.base/watchpoint.exp (test_stepping): Clear xfail
for ARM targets.
spelling.
(test_enums): New procedure. Move enum tests from end of script
to here. Set breakpoint on function name instead of line number.
* gdb.c++/misc.cc (ClassWithEnum): Move past Foo definitions.
(enums2): New marker function.
(enums1): New function.
(main): Call enums1(). Move enum tests to enums1().
* gdb.base/annota1.exp (run until main breakpoint): Loosen up
the regular expression: accept an (almost) arbitrary sequence of
"frames-invalid" and "breakpoints-invalid" messages both before
and after the "starting" message.
* gdb.base/break.exp (bp on small function, optimized file):
Add a second pass pattern. The behavior differs here between stabs
and dwarf for one-line functions. Stabs preserves two line symbols
(one before the prologue and one after) with the same line number,
but dwarf regards these as duplicates and discards one of them.
Therefore the address after the prologue (where the breakpoint is)
has no exactly matching line symbol, and GDB reports the breakpoint
as if it were in the middle of a line rather than at the beginning.
* gdb.base/call-ar-st.exp: Bail out if target is sparclet.
This test depends on parsing the printf output from the target.
Since the sparclet stub doesn't do stdio, this will never work.
* gdb.base/call-rt-st.exp: ditto.
* gdb.base/call-strs: ditto.
* gdb.base/miscexprs.exp: make sizeof long array test portable.
* gdb.base/ending-run.exp: After connecting to a remote target,
but before running, the target will appear to be in a random
location. Specify both a file and a line for breakpoints.
Also, the function that calls main may be called 'init'
rather than 'start'.
Change to rely on PIDGET etc.
* config/i386/nm-i386sol2.h (TARGET_HAS_WATCHPOINTS,
TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_CONTINUABLE_WATCHPOINT,
STOPPED_BY_WATCHPOINT, target_[insert/remove]_watchpoint):
define. Allow target to use procfs hardware watchpoints.
* config/sparc/nm-sun4sol2.h: ditto.
* config/i386/tm-i386sol2.h (PIDGET, TIDGET, MERGEPID): modify
definitions to use 16 bits for the pid, 15 bits for the tid, and
1 bit for the flag.
* config/sparc/tm-sun4sol2.h: ditto.
(SOFTWARE_SINGLE_STEP, SOFTWARE_SINGLE_STEP_P): undefine.
* testsuite/gdb.threads/pthreads.exp (all_threads_running): Allow
for more than 15 thread increments.
values that can be represented exactly.
* gdb.base/call-ar-st.exp (print print_small_structs): Fixed to match
above change, and to not check against the directory part of the source
file name.
(step into print_long_arg_list): Likewise.
(print print_small_structs from print_long_arg_list): Likewise.
(print print_long_arg_list): Likewise.
* eval.c (evaluate_subexp_with_coercion): Add call to
check_typedef, to handle typedeffed vars correctly.
* gdb.base/printcmds.c: Add typedeffed arrays.
* gdb.base/printcmds.exp (test_print_typedef_arrays): New
procedure to test arrays that are typedef'd.
Add support for a variable object that tries to evaluate itself in
the currently selected frame, rather than in a fixed frame.
* wrapper.c,h (gdb_parse_exp_1): Added a wrapper for
gdb_parse_exp_1.
* varobj.h: Added USE_CURRENT_FRAME to varobj_type & changed def'n
of varobj_create.
* varobj.c (varobj_list): Return type indicates whether the
variable's type has changed (for current frame variables).
(varobj_update): Handle the case where the variable's type has
changed.
(delete_variable_1): Allow for deletion of variables that have not
been installed yet.
(new_root_variable): Initialize use_selected_frame variable.
(value_of_root): This is where most of the work to handle "current
frame" variables was added. Most of the complexity involves
handling the case where the type of the variable has changed.
(varobj_create): Add a "type" argument, to tell if the
variable is one of these "current frame" variables. Also protect
call to parse_exp_1 from long jumping.
* mi-var-block.exp: The error report from varobj_create changed
since I am now trapping parse_exp_1 errors. Change the tests to
match the new error message.
* mi-var-child.exp: Ditto.
* mi-var-cmd.exp: Ditto.
* lib/gdb.exp: Fix the gdbtk_start routine to correctly find all
the library directories.
* gdbtk-varobj.c (variable_create): Pass the correct
"how_specified" flag to the varobj_create routine.
* gdb.base/long_long.exp: Correct test suite failure when printing
a long long value as a double on ARM platforms.
ARM doubles use a hybrid endian format. It is not strictly little or big
endian. It is little endian with the words swapped.
* mi-disassemble.exp: Don't assume numbers for the offset
values. They can be different depending on the architecture.
* mi-watch.exp (test_watchpoint_triggering): In same cases the
type can be 'hw wathcpoint' not just 'watchpoint'. Adjust for that.
* basics.c (callee4): Make the function return something,
otherwise the return value is undefined.
* gdb/config/i386/windows.mh,
gdb/doc/GDBvn.texi, gdb/doc/remote.texi,
gdb/testsuite/gdb.base/README, gdb/testsuite/gdb.base/crossload.exp,
gdb/testsuite/gdb.base/i486-elf.u, gdb/testsuite/gdb.base/i860-elf.u,
gdb/testsuite/gdb.base/m68k-aout.u,
gdb/testsuite/gdb.base/m68k-aout2.u,
gdb/testsuite/gdb.base/m68k-elf.u, gdb/testsuite/gdb.base/mips-ecoff.u,
gdb/testsuite/gdb.base/sparc-aout.u,
gdb/testsuite/gdb.base/sparc-elf.u,
gdb/tui/Makefile,
readline/ChangeLog: These files have been removed over the course
of the last year, but weren't cvs removed from the old GDB repository
on sourceware.
* gdb.base/miscexprs.exp: Change patterns to match GDB's
actual output formatting.
* gdb.base/smoke.exp: GDB removes leading 0's.
* gdb.base/volatile.exp: Don't check type of remuneration;
that variable is no longer defined in constvars.c.
* gdb.base/step-test.c (main): Exit with explicit exit code.
* gdb.base/step-test.exp: Remove two nexti checks--they are
not portable.
* gdb.base/help.exp ("help delete display"): Fix test to match
gdb's output.
* gdb.base/long_long.c (known_types): Initialize values to zero.
* gdb.base/long_long.exp: Step one more line
so 'dec' is initialized in "get to known place". GDB doesn't
prepend unnecessary zeros to the front of numbers. Explicitly
ask for hex formatting. Use unique test case names.
* srcwin.test (click): New function that generates an event
at a location.
(srcwin-4.4): New test. Simulate a click on a line and
check for breakpoint set.
(srcwin-4.5): New test. Right-click on a line and select "Continue
to Here" from popup.
* srcwin.exp: Source srcwin3.test, which will test source window
assembly debugging on executables built without "-g".
so-thresh.linkopts, so-thresh.mk: Move to gdb.hp from gdb.base
(shortening names from solib_threshold.exp etc), won't run on
anything but HP-UX for the foreseeable future.
* gdb.hp/Makefile.in, gdb.base/Makefile.in (clean): Adjust to
reflect move.
* gdbtk.c (gdbtk_init): Create tcl warp_pointer command
for use with testing.
* gdbtk-cmds.c (gdb_loc): Fix for case where there are only
minimal symbols. Also make gdb_loc return the shared library
the location is in, if it is in one.
scope.exp, langs.exp, list.exp -- compile one file at a time, then link.
default.exp -- change expected messages for catch and info catch tests to
reflect hp merge changes.
to delete on clean.
(EXECUTABLES): update to reflect new additions.
* gdb.base/commands.exp: update message expected.
* gdb.base/default.exp: add copyright notice.
* gdb.base/funcargs.exp (timeout): if hpux, increase timeout.
* gdb.base/help.exp: update messages to reflect current text.
* gdb.base/recurse.exp: add hpppa*-*-bsd* to 'list' of enabled
targets for recurse tests.
* gdb.base/watchpoint.exp: if on hpux and not gcc compiled, then
skip this file.
* gdb.c++/classes.exp: Change all regular expressions to match
arbitrary combinations of newline/carriage-return, so that they
will work equally well on Unix and Windows.
* gdb.c++/inherit.exp: ditto.
* gdb.c++/virtfunc.exp: ditto.
* configure.in: Add options for gdbtk testsuite.
* configure: Regenerate.
* gdb.gdbtk: New directory to hold gdbtk tests.
* gdb.gdbtk/console.{exp, test}: New console window tests.
Peter Schauer
Michael Snyder
Jimmy Guo
Scott Bambrough
Anthony Green
Andrew Cagney
Nicholas Duffek
Elena Zannoni
Daniel Berlin
Kevin Buettner
Fernando Nasser
J.T. Conklin
Philippe De Muyter
Jonathan Larmour
Jim Ingham
Jim Blandy
Jason Molenda
Stan Shebs
Jeff Law
Martin Hunt
Brendan Kehoe
Keith Seitz
Felix Lee
David Taylor
Nick Clifton
Dawn Perchik