260 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Will Newton
|
4b7d1f7fb4 |
gdb/elfread.c: Enable ifunc support on ARM.
There are two failures in the gnu-ifunc.exp test on ARM. These are due to the failure to resolve the correct target function when attempting to breakpoint a GNU ifunc resolved function: (gdb) break gnu_ifunc Breakpoint 4 at gnu-indirect-function resolver at 0x2aacb5a2 when gnu_ifunc has been resolved this should actually be: (gdb) break gnu_ifunc Breakpoint 4 at 0x868c There are two reasons for this. The first is that ARM does not have a separate .got.plt section so looking this up will always fail. The second is that the Thumb bit needs to be stripped from the address to allow it to be reliably compared when inserting into the ifunc cache. Tested with no regressions on arm-linux-gnueabihf and x86_64-unknown-linux-gnu. gdb/ChangeLog: 2014-02-10 Will Newton <will.newton@linaro.org> * elfread.c (elf_rel_plt_read): Look for a .got section if looking up .got.plt fails. (elf_gnu_ifunc_resolve_by_got): Call gdbarch_addr_bits_remove on address passed to elf_gnu_ifunc_record_cache. (elf_gnu_ifunc_resolve_addr): Likewise. (elf_gnu_ifunc_resolver_return_stop): Likewise. |
|
Tom Tromey
|
fc270c357a |
replace XCALLOC with XCNEWVEC or XCNEW
This removes XCALLOC and replaces it either with XCNEWVEC, or, if the number of elements being requested was 1, with XCNEW. 2014-01-13 Tom Tromey <tromey@redhat.com> * defs.h (XCALLOC): Remove. * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC. (print_bcache_statistics): Use XCNEWVEC, not XCALLOC. * dwarf2loc.c (allocate_piece_closure): Likewise. * elfread.c (elf_symfile_segments): Likewise. (elf_symfile_segments): Likewise. * gdbtypes.c (copy_type_recursive): Likewise. * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC. * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC. * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not XCALLOC. * mt-tdep.c (mt_gdbarch_init): Likewise. * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not XCALLOC. * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC. * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC. * registry.c (registry_alloc_data): Likewise. * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * serial.c (serial_fdopen_ops): Likewise. * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not XCALLOC. * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC. * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC, not XCALLOC. |
|
|
Tom Tromey
|
41bf6acad7 |
replace XZALLOC with XCNEW
This replaces XZALLOC with XCNEW and removes XZALLOC. This change is purely mechanical. 2014-01-13 Tom Tromey <tromey@redhat.com> * defs.h (XZALLOC): Remove. * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC. * ada-tasks.c (get_ada_tasks_pspace_data): Likewise. (get_ada_tasks_inferior_data): Likewise. * auto-load.c (get_auto_load_pspace_data): Likewise. * auxv.c (get_auxv_inferior_data): Likewise. * bfd-target.c (target_bfd_reopen): Likewise. * breakpoint.c (get_catch_syscall_inferior_data): Likewise. (deprecated_insert_raw_breakpoint): Likewise. * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise. * corelow.c (core_open): Likewise. * darwin-nat.c (darwin_check_new_threads): Likewise. (darwin_attach_pid): Likewise. * dummy-frame.c (dummy_frame_push): Likewise. * dwarf2-frame.c (dwarf2_frame_cache): Likewise. * dwarf2loc.c (allocate_piece_closure): Likewise. * elfread.c (elf_symfile_segments): Likewise. * eval.c (ptrmath_type_p): Likewise. * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise. * gdbtypes.c (alloc_type_arch): Likewise. (alloc_type_instance): Likewise. * hppa-tdep.c (hppa_gdbarch_init): Likewise. * inf-child.c (inf_child_can_use_agent): Likewise. * inflow.c (get_inflow_inferior_data): Likewise. * infrun.c (save_infcall_suspend_state): Likewise. * jit.c (jit_reader_load): Likewise. (get_jit_objfile_data): Likewise. (get_jit_program_space_data): Likewise. (jit_object_open_impl): Likewise. (jit_symtab_open_impl): Likewise. (jit_block_open_impl): Likewise. (jit_frame_sniffer): Likewise. * linux-fork.c (add_fork): Likewise. * maint.c (make_command_stats_cleanup): Likewise. * objfiles.c (get_objfile_pspace_data): Likewise. * opencl-lang.c (struct lval_closure): Likewise. * osdata.c (osdata_start_osdata): Likewise. * progspace.c (new_address_space): Likewise. (add_program_space): Likewise. * remote-sim.c (get_sim_inferior_data): Likewise. * sh-tdep.c (sh_gdbarch_init): Likewise. * skip.c (Ignore): Likewise. (skip_delete_command): Likewise. * solib-aix.c (get_solib_aix_inferior_data): Likewise. (library_list_start_library): Likewise. (solib_aix_current_sos): Likewise. * solib-darwin.c (get_darwin_info): Likewise. (darwin_current_sos): Likewise. * solib-dsbt.c (get_dsbt_info): Likewise. * solib-ia64-hpux.c (new_so_list): Likewise. (ia64_hpux_get_solib_linkage_addr): Likewise. * solib-spu.c (append_ocl_sos): Likewise. (spu_current_sos): Likewise. * solib-svr4.c (get_svr4_info): Likewise. (svr4_keep_data_in_core): Likewise. (library_list_start_library): Likewise. (svr4_default_sos): Likewise. (svr4_read_so_list): Likewise. * solib-target.c (library_list_start_library): Likewise. (solib_target_current_sos): Likewise. * sparc-tdep.c (sparc32_gdbarch_init): Likewise. * symfile-debug.c (install_symfile_debug_logging): Likewise. * symfile.c (default_symfile_segments): Likewise. * target-descriptions.c (tdesc_data_init): Likewise. (tdesc_create_reg): Likewise. (struct tdesc_type *): Likewise. (tdesc_create_vector): Likewise. (tdesc_set_struct_size): Likewise. (struct tdesc_type *): Likewise. (tdesc_free_feature): Likewise. (tdesc_create_feature): Likewise. * windows-nat.c (windows_add_thread): Likewise. (windows_make_so): Likewise. * xml-support.c (gdb_xml_body_text): Likewise. (gdb_xml_create_parser_and_cleanup): Likewise. (xml_process_xincludes): Likewise. * xml-syscall.c (allocate_syscalls_info): Likewise. (syscall_create_syscall_desc): Likewise. |
|
Joel Brobecker
|
ecd75fc8ee | Update Copyright year range in all files maintained by GDB. | |
|
Tom Tromey
|
37fbcad0be |
remove some sym_probe_fns methods
While looking into the probe API, it seemed to me that there were a number of methods in sym_probe_fns that were not needed. This patch removes them. Specifically, it seems to me that sym_probe_fns ought to be concerned with the API for constructing the probes. Any method relating to some aspect of an individual probe can be handled via the probe's own vtable. That is, the double indirection here doesn't seem useful -- it certainly isn't in fact used, but also I couldn't think of a potential use. 2013-12-06 Tom Tromey <tromey@redhat.com> * break-catch-throw.c (fetch_probe_arguments): Use get_probe_argument_count and evaluate_probe_argument. * elfread.c (elf_get_probe_argument_count) (elf_can_evaluate_probe_arguments, elf_evaluate_probe_argument) (elf_compile_to_ax): Remove. (elf_probe_fns): Update. * probe.c (get_probe_argument_count, can_evaluate_probe_arguments) (evaluate_probe_argument): Call method on probe, not via sym functions. * stap-probe.c (compute_probe_arg): Use get_probe_argument_count, evaluate_probe_argument. (compile_probe_arg): Use get_probe_argument_count. Call method on probe, not via sym functions. * symfile-debug.c (debug_sym_get_probe_argument_count) (debug_can_evaluate_probe_arguments) (debug_sym_evaluate_probe_argument, debug_sym_compile_to_ax): Remove. (debug_sym_probe_fns): Remove. * symfile.h (struct sym_probe_fns) <sym_get_probe_argument_count, can_evaluate_probe_arguments, sym_evaluate_probe_argument, sym_compile_to_ax>: Remove fields. |
|
|
Tom Tromey
|
0e9f083f4c |
remove gdb_string.h
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
|
|
|
Tom Tromey
|
5c4c8a5911 |
remove unused field from struct elfinfo
I noticed that one field in elfread.c:struct elfinfo is unused. This patch removes it. * elfread.c (struct elfinfo) <stabindexsect>: Remove. (elf_locate_sections): Update. |
|
|
Tom Tromey
|
dc294be54c |
fix PR symtab/15597
This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs. |
|
Doug Evans
|
8fb8eb5ca4 |
New option "set debug symfile on".
* NEWS: Mention "set debug symfile". * Makefile.in (SFILES): Add symfile-debug.c. (COMMON_OBS): Add symfile-debug.o. * elfread.c (elf_symfile_read): Use objfile_set_sym_fns to set the objfile's symbol functions. * objfiles.h (objfile_set_sym_fns): Declare. * symfile-debug.c: New file. * symfile.c (syms_from_objfile_1): Use objfile_set_sym_fns to set the objfile's symbol functions. (reread_symbols): Ditto. |
|
|
Doug Evans
|
c256e17165 |
* symfile.h (struct sym_fns): Delete member "sym_flavour".
All uses updated. (add_symtab_fns): Update prototype. * symfile.c (sym_fns_ptr): Delete. Replace with ... (registered_sym_fns): ... this. (symtab_fns): Update. (add_symtab_fns): New arg "flavour". All callers updated. (find_sym_fns): Rewrite to use new sym_fns registry. |
|
Jan Kratochvil
|
24ba069af8 |
Keep objfile original filename
gdb/ 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com> Pass down original filename for objfile. * coffread.c (coff_symfile_read): Update symbol_file_add_separate call. * elfread.c (elf_symfile_read): Likewise. * jit.c (jit_object_close_impl): Update allocate_objfile call, no longer set ORIGINAL_NAME. (jit_bfd_try_read_symtab): Update symbol_file_add_from_bfd call. * jv-lang.c (get_dynamics_objfile): Update allocate_objfile call. * machoread.c (macho_add_oso_symfile): Add parameter name. Update symbol_file_add_from_bfd call. (macho_symfile_read_all_oso): Update two macho_add_oso_symfile calls. (macho_check_dsym): Add parameter filenamep. Change function comment. Set *filenamep. (macho_symfile_read): New variable dsym_filename. Update macho_check_dsym call. Use it for symbol_file_add_separate. * objfiles.c (allocate_objfile): Add parameter name. New comment for it. Use it for objfile->original_name. (objfile_name): Return OBFD's filename, if available. * objfiles.h (allocate_objfile): Add new parameter name. * solib.c (solib_read_symbols): Update symbol_file_add_from_bfd call. * symfile-mem.c (symbol_file_add_from_memory): Update symbol_file_add_from_bfd call. * symfile.c (read_symbols): Update symbol_file_add_separate call, new comment for it. (symbol_file_add_with_addrs): New parameter name, add function comment for it. Remove variable name. Update allocate_objfile call. (symbol_file_add_separate): New parameter name, add function comment for it. Update symbol_file_add_with_addrs call. (symbol_file_add_from_bfd): New parameter name. Update symbol_file_add_with_addrs call. (symbol_file_add): Update symbol_file_add_from_bfd call. (reread_symbols): New variable original_name. Save objfile->original_name by it. * symfile.h (symbol_file_add_from_bfd, symbol_file_add_separate): Add second parameter. |
|
|
Jan Kratochvil
|
4262abfb98 |
Code cleanup: Add objfile_name accessor
gdb/ 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com> Code cleanup: Add objfile_name accessor function. * ada-lang.c (is_known_support_routine): Use objfile_name. * auto-load.c (source_gdb_script_for_objfile) (auto_load_objfile_script): Likewise. * coffread.c (coff_symtab_read, read_one_sym): Likewise. * dbxread.c (dbx_symfile_read): Likewise. * dwarf2-frame.c (dwarf2_build_frame_info): Likewise. * dwarf2loc.c (locexpr_describe_location_piece): Likewise. * dwarf2read.c (dwarf2_get_dwz_file, dwarf2_read_index) (dw2_symtab_iter_next, dw2_expand_symtabs_matching) (lookup_dwp_signatured_type, lookup_dwo_unit) (dwarf2_build_psymtabs_hard, scan_partial_symbols, process_queue) (fixup_go_packaging, process_imported_unit_die, dwarf2_physname) (read_import_statement, create_dwo_cu, open_and_init_dwp_file) (lookup_dwo_cutu, read_call_site_scope, dwarf2_ranges_read) (dwarf2_record_block_ranges, read_common_block, read_typedef) (read_subrange_type, load_partial_dies, read_partial_die) (read_addr_index_1, read_str_index, dwarf_decode_lines_1) (die_containing_type, build_error_marker_type, lookup_die_type) (follow_die_ref_or_sig, follow_die_ref, dwarf2_fetch_die_loc_sect_off) (dwarf2_fetch_constant_bytes, follow_die_sig, get_signatured_type) (get_DW_AT_signature_type, write_psymtabs_to_index) (save_gdb_index_command): Likewise. * elfread.c (find_separate_debug_file_by_buildid, elf_symfile_read): Likewise. * expprint.c (dump_subexp_body_standard): Likewise. * gdbtypes.c (type_name_no_tag_or_error): Likewise. * jit.c (jit_object_close_impl): Use the objfile field name renamed to original_name. * linux-thread-db.c (try_thread_db_load_from_pdir_1): New variable obj_name, use objfile_name for it, use the variable. (try_thread_db_load_from_pdir, has_libpthread, thread_db_new_objfile): Use objfile_name. * machoread.c (macho_symtab_read, macho_check_dsym) (macho_symfile_relocate): Likewise. * maint.c (maintenance_translate_address): Likewise. * minidebug.c (find_separate_debug_file_in_section): Likewise. * minsyms.c (install_minimal_symbols): Likewise. * objfiles.c (allocate_objfile): Use the objfile field name renamed to original_name. (filter_overlapping_sections): Use objfile_name. (objfile_name): New function. * objfiles.h (struct objfile): Rename field name to original_name. (objfile_name): New prototype. * printcmd.c (sym_info, address_info): Use objfile_name. * probe.c (parse_probes, collect_probes, compare_probes) (info_probes_for_ops): Likewise. * progspace.c (clone_program_space): Likewise. * psymtab.c (require_partial_symbols, dump_psymtab, allocate_psymtab) (maintenance_info_psymtabs): Likewise. * python/py-auto-load.c (gdbpy_load_auto_script_for_objfile) (source_section_scripts): Likewise. * python/py-objfile.c (objfpy_get_filename): Likewise. * python/py-progspace.c (pspy_get_filename): Likewise. * solib-aix.c (solib_aix_get_toc_value): Likewise. * solib-som.c (match_main, som_solib_section_offsets): Likewise. * solib.c (solib_read_symbols): Likewise. * stabsread.c (scan_file_globals): Likewise. * stap-probe.c (handle_stap_probe): Likewise. * symfile.c (symbol_file_clear, separate_debug_file_exists) (find_separate_debug_file_by_debuglink): Likewise. (reread_symbols): Likewise. Use the objfile field name renamed to original_name. (allocate_symtab): Use objfile_name. * symmisc.c (print_symbol_bcache_statistics, print_objfile_statistics) (dump_objfile, dump_msymbols, dump_symtab_1) (maintenance_print_msymbols, maintenance_print_objfiles) (maintenance_info_symtabs, maintenance_check_symtabs): Likewise. * target.c (target_translate_tls_address, target_info): Likewise. * xcoffread.c (xcoff_initial_scan): Make variable name const. Use objfile_name. |
|
|
Doug Evans
|
4f00dda370 |
* elfread.c (elf_symfile_read): Move "Done reading minimal symbols"
debugging printf to better location. |
|
|
Tom Tromey
|
df6d544176 |
move gdbarch object from objfile to per-BFD
This moves the "gdbarch" field from the objfile into the BFD. This field's value is derived from the BFD and is immutable over the lifetime of the BFD. This makes it a reasonable candidate for pushing into the per-BFD object. This is part of the long-term objfile splitting project. In the long run I think this patch will make it simpler to moves types from the objfile to the per-BFD object; but the patch makes sense as a minor cleanup by itself. Built and regtested on x86-64 Fedora 18. * cp-namespace.c (cp_lookup_symbol_imports_or_template): Use get_objfile_arch. * elfread.c (elf_rel_plt_read, elf_gnu_ifunc_record_cache) (elf_gnu_ifunc_resolve_by_got): Use get_objfile_arch. * jit.c (jit_object_close_impl): Update. * jv-lang.c (get_dynamics_objfile): Update. * linespec.c (add_minsym): Use get_dynamics_objfile. * objfiles.c (get_objfile_bfd_data): Initialize 'gdbarch' field. (allocate_objfile): Don't initialize 'gdbarch' field. (get_objfile_arch): Update. * objfiles.h (struct objfile_per_bfd_storage) <gdbarch>: New field, moved from... (struct objfile) <gdbarch>: ... here. Remove. * stap-probe.c (stap_can_evaluate_probe_arguments): Use get_objfile_arch. * symfile.c (init_entry_point_info): Use get_objfile_arch. |
|
Sergio Durigan Junior
|
25f9533e51 |
2013-07-24 Sergio Durigan Junior <sergiodj@redhat.com>
* breakpoint.c (create_longjmp_master_breakpoint): Check if probe interface can evaluate arguments. Fallback to the old mode if it cannot. (create_exception_master_breakpoint): Likewise. * elfread.c (elf_can_evaluate_probe_arguments): New function. (struct sym_probe_fns elf_probe_fns): Export function above to the probe interface. * probe.c (can_evaluate_probe_arguments): New function. * probe.h (struct probe_ops) <can_evaluate_probe_arguments>: New function pointer. (can_evaluate_probe_arguments): New function prototype. * solib-svr4.c (svr4_create_solib_event_breakpoints): Check if probe interface can evaluate arguments. Fallback to the old mode if it cannot. * stap-probe.c (stap_get_probe_argument_count): Check if probe interface can evaluate arguments. Warning the user if it cannot. (stap_can_evaluate_probe_arguments): New function. (struct probe_ops stap_probe_ops): Export function above to the probe interface. * symfile.h (struct sym_probe_fns) <can_evaluate_probe_arguments>: New function pointer. |
|
|
Doug Evans
|
3189cb1297 |
* dbxread.c (process_one_symbol): Constify section_offsets parameter.
* stabsread.h (process_one_symbol): Update declaration. * dwarf2read.c (dw2_relocate): Constify new_offsets, delta parameters. * elfread.c (elf_symfile_relocate_probe): Ditto. * psymtab.c (relocate_psymtabs): Ditto. * objfiles.c (objfile_relocate1): Constify new_offsets parameter. (objfile_relocate): Ditto. * objfiles.h (objfile_relocate): Update declaration. * symfile.c (relative_addr_info_to_section_offsets): Constify addrs parameter. (default_symfile_offsets): Ditto. (syms_from_objfile_1): Constify offsets parameter. (syms_from_objfile): Ditto. (symbol_file_add_with_addrs_or_offsets): Ditto. (symfile_map_offsets_to_segments): Constify data parameter. * symfile.h (struct quick_symbol_functions): Constify new_offsets, delta parameters of member relocate. (struct sym_probe_fns): Constify new_offsets, delta parameters of member sym_relocate_probe. (struct sym_fns): Constify section_addr_info parameter of member sym_offsets. (relative_addr_info_to_section_offsets): Update declaration. (default_symfile_offsets): Ditto. (syms_from_objfile): Ditto. (symfile_map_offsets_to_segments): Ditto. |
|
|
Tom Tromey
|
715c6909e2 |
* elfread.c (elf_symtab_read): Install versioned symbol under
unversioned name as well. |
|
|
Tom Tromey
|
e27d198cc4 |
PR symtab/8424:
* blockframe.c (find_pc_partial_function_gnu_ifunc): Check SYMBOL_SECTION, not SYMBOL_OBJ_SECTION. * breakpoint.c (resolve_sal_pc): Update. * elfread.c (elf_gnu_ifunc_record_cache): Update. * findvar.c (struct minsym_lookup_data) <objfile>: New field. (minsym_lookup_iterator_cb): Use it. (default_read_var_value): Update. * hppa-hpux-tdep.c (hppa64_hpux_in_solib_call_trampoline): Update. * infcmd.c (jump_command): Update. * linespec.c (minsym_found): Update. * maint.c (maintenance_translate_address): Update. * minsyms.c (lookup_minimal_symbol_by_pc_section_1): Update. (prim_record_minimal_symbol_full): Don't set SYMBOL_OBJ_SECTION. * parse.c (write_exp_msymbol): Update. * printcmd.c (address_info): Update. * psymtab.c (find_pc_sect_psymbol): Update. (fixup_psymbol_section): Check SYMBOL_SECTION, not SYMBOL_OBJ_SECTION. (add_psymbol_to_bcache): Correctly initialize SYMBOL_SECTION. Don't initialize SYMBOL_OBJ_SECTION. * spu-tdep.c (spu_catch_start): Update. * stabsread.c (define_symbol): Don't set SYMBOL_SECTION. * symmisc.c (dump_msymbols, print_symbol): Update. * symtab.c (fixup_section): Don't set 'obj_section'. Change how fallback section is computed. (fixup_symbol_section): Update. (find_pc_sect_symtab, find_function_start_sal, skip_prologue_sal): Update. (allocate_symbol, initialize_symbol, allocate_template_symbol): Initialize SYMBOL_SECTION. * symtab.h (struct general_symbol_info) <section>: Update comment. <obj_section>: Remove. (SYMBOL_OBJ_SECTION): Add 'objfile' argument. Rewrite. (SYMBOL_OBJFILE): New macro. |
|
|
Tom Tromey
|
e6dc44a8f5 |
* coffread.c (record_minimal_symbol): Update.
* dbxread.c (record_minimal_symbol): Update. * elfread.c (record_minimal_symbol): Update. * machoread.c (macho_symtab_add_minsym): Update. * mdebugread.c (record_minimal_symbol, parse_partial_symbols): Update. * minsyms.c (prim_record_minimal_symbol): Update. (prim_record_minimal_symbol_full): Remove 'bfd_section' argument. (prim_record_minimal_symbol_and_info): Likewise. * minsyms.h (prim_record_minimal_symbol_full) (prim_record_minimal_symbol_and_info): Update. * symtab.c (allocate_symbol, initialize_symbol) (allocate_template_symbol): Initialize SYMBOL_SECTION. * xcoffread.c (record_minimal_symbol, scan_xcoff_symtab): Update. |
|
|
Tom Tromey
|
65cf356359 |
* coffread.c (cs_to_section): Use gdb_bfd_section_index.
* elfread.c (record_minimal_symbol, elf_symtab_read): Use gdb_bfd_section_index. * gdb_bfd.c (gdb_bfd_section_index, gdb_bfd_count_sections): New functions. * gdb_bfd.h (gdb_bfd_section_index, gdb_bfd_count_sections): Declare. * machoread.c (macho_symtab_add_minsym, macho_symfile_offsets): Update. * objfiles.c (add_to_objfile_sections_full): New function. (add_to_objfile_sections): Use it. (build_section_table): Rewrite. (objfile_relocate1): Use gdb_bfd_section_index. Update. * objfiles.h (obj_section_offset): Use gdb_bfd_section_index. (struct objfile) <sections>: Update comment. (ALL_OBJFILE_OSECTIONS): Skip sections where the_bfd_section is NULL. (ALL_OBJSECTIONS): Use it. * solib-dsbt.c (dsbt_relocate_main_executable): Update. * solib-frv.c (frv_relocate_main_executable): Update. * solib-target.c (solib_target_relocate_section_addresses): Use gdb_bfd_section_index. * symfile.c (build_section_addr_info_from_section_table): Use gdb_bfd_section_index. (build_section_addr_info_from_bfd, place_section): Likewise. * symtab.c (fixup_section): Update. * xcoffread.c (find_targ_sec): Use gdb_bfd_section_index. |
|
|
Tom Tromey
|
7cbd4a934e |
* minsyms.h (struct bound_minimal_symbol): New.
(lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol. Remove objfile argument. (lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc): Return bound_minimal_symbol. * minsyms.c (lookup_minimal_symbol_by_pc_1) (lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc): Return bound_minimal_symbol. (in_gnu_ifunc_stub): Update. (lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol. Remove 'objfile_p' argument. (lookup_solib_trampoline_symbol_by_pc): Update. * ada-tasks.c, amd64-windows-tdep.c, arm-tdep.c, arm-wince-tdep.c, block.c, blockframe.c, breakpoint.c, btrace.c, c-valprint.c, dwarf2loc.c, elfread.c, frame.c, frv-tdep.c, glibc-tdep.c, gnu-v2-abi.c, gnu-v3-abi.c, hppa-hpux-tdep.c, i386-tdep.c, ia64-tdep.c, infcall.c, infcmd.c, jit.c, linux-fork.c, m32c-tdep.c, m68hc11-tdep.c, maint.c, mips-tdep.c, p-valprint.c, parse.c, ppc-linux-tdep.c, ppc-sysv-tdep.c, printcmd.c, rs6000-tdep.c, sh64-tdep.c, stack.c, symtab.c, tui/tui-disasm.c: Update. |
|
|
Sergio Durigan Junior
|
bb869963da |
From: Sergio Durigan Junior <sergiodj@redhat.com>
Subject: [PATCH] Fix for PR c++/15203 and PR c++/15210
Date: Sat, 09 Mar 2013 02:50:49 -0300 (5 days, 4 hours, 57 minutes ago)
Message-ID: <m3a9qdnmti.fsf@redhat.com>
Hi,
This bug was reported internally at our Bugzilla, along with a proposed
fix. After talking to Keith about it, he investigated and came up with
another patch needed to really fix the issue on CVS HEAD.
The first part of the fix is the patch to cp-namespace.c. It handles
the case when we are accessing a static variable inside a function
(inside a class) by the full linespec (is it right, Keith?). E.g.:
class foo
{
public:
int bar()
{
static int var = 0;
}
};
And then, printing the value of `var':
(gdb) print 'foo::bar()::var'
GDB would fall in an internal_error:
gdb/cp-namespace.c:816: internal-error: cp_lookup_nested_symbol called on a non-aggregate type.
This is because `cp_lookup_nested_symbol' is not handling the case when
TYPE_CODE is either _FUNC or _METHOD. This patch fixes it by returning
NULL in this case.
The second part of the fix is the patch to elfread.c. It is needed
because the BSF_GNU_UNIQUE flag was added to some symbols in
<http://sourceware.org/ml/binutils/2009-06/msg00016.html>. Because of
that, (still) the command:
(gdb) print 'foo::bar()::var'
where `var' is a static variable returns:
"No symbol "foo::bar()::var" in current context."
So with the second patch applied the command finally DTRT:
(gdb) print 'foo::bar()::var'
$1 = 0
This may not be the ideal solution, according to Keith it would be good
to implement productions on c-exp.y in order to recognize
CLASS::FUNCTION::VARIABLE, but it is a solution which works with what we
have today.
I regtested it in Fedora 17 x86_64 with -m64 and -m32, including
gdbserver, without regressions.
gdb/:
2013-03-14 Keith Seitz <keiths@redhat.com>
Alan Matsuoka <alanm@redhat.com>
PR c++/15203
PR c++/15210
* cp-namespace.c (cp_lookup_nested_symbol): Handle TYPE_CODE_FUNC and
TYPE_CODE_METHOD.
* elfread.c (elf_symtab_read): Handle BSF_GNU_UNIQUE for certain
symbols.
gdb/testsuite/:
2013-03-14 Sergio Durigan Junior <sergiodj@redhat.com>
PR c++/15203
PR c++/15210
* gdb.cp/m-static.cc (keepalive_int): New function.
(gnu_obj_1::method): New variable `sintvar', call `keepalive_int'.
* gdb.cp/m-static.exp: New test for `sintvar'.
|
|
|
Doug Evans
|
7b6c814ed7 |
* elfread.c (elf_symfile_read): Move debugging printf to more
logical location. |
|
Alan Modra
|
24c274a133 |
* elfread.c (elf_symtab_read): Do not use udata.p here to find
symbol size. * ppc64-tdep.c (ppc64_elf_make_msymbol_special): New function. * ppc64-tdep.h (ppc64_elf_make_msymbol_special): Declare. * ppc-linux-tdep.c (ppc_linux_init_abi): Set up to use the above. * ppcfbsd-tdep.c (ppcfbsd_init_abi): Likewise. |
|
|
Jan Kratochvil
|
bfada1897a |
gdb/
Code cleanup. * elfread.c (build_id_bfd_get): Make the return type const. (build_id_verify): Make the check parameter const. (build_id_to_debug_filename): Make the build_id parameter and variable data const. (find_separate_debug_file_by_buildid): Make the variable build_id const. |
|
|
Alan Modra
|
c03551323c |
bfd/
* elf-bfd.h (struct elf_build_id): Extracted from.. (struct elf_build_id_info): ..here. Delete. (struct output_elf_obj_tdata): New, extracted from.. (struct elf_obj_tdata): ..here. Reorganize for better packing. Add "o" field. (elf_program_header_size): Reference tdata->o. (elf_seg_map, elf_next_file_pos, elf_eh_frame_hdr, elf_linker, elf_stack_flags, elf_shstrtab, elf_strtab_sec, elf_shstrtab_sec, elf_section_syms, elf_num_section_syms, elf_flags_init): Likewise. * elf.c (bfd_elf_allocate_object): Allocate output_elf_obj_tdata when opening bfd in any mode that might write. (_bfd_elf_write_object_contents): Use build_id field in output_elf_obj_tdata. (_bfd_elf_close_and_cleanup): Tweak elf_shstrtab test. (elfobj_grok_gnu_build_id): Adjust for elf_tdata changes. gdb/ * elfread.c (build_id_bfd_get): Adjust for elf_tdata changes. ld/ * emultempl/elf32.em (write_build_id, setup_build_id): Adjust for elf_tdata changes. |
|
|
Alan Modra
|
30e8ee25e3 |
include/
* bfdlink.h (struct bfd_link_info): Delete emit_note_gnu_build_id.
bfd/
* configure.in: Bump version to 2.23.52.
* elf-bfd.h (struct elf_build_id_info): New.
(struct elf_obj_tdata): Delete after_write_object_contents,
after_write_object_contents_info and build_id_size. Make build_id
a pointer to struct elf_build_id_info.
* elf.c (_bfd_elf_write_object_contents): Style. Update
after_write_ibject_contents invocation.
(elfobj_grok_gnu_build_id): Update for new build_id struct. Don't
allow zero size notes.
* configure: Regenerate.
gdb/
* elfread.c (struct build_id): Delete. Use struct elf_build_id
throughout file instead.
(build_id_bfd_get): Update to use new elf_tdata build_id field.
Don't xmalloc return value.
(build_id_verify): Similarly. Don't xfree.
(build_id_to_debug_filename): Update.
(find_separate_debug_file_by_buildid): Update, don't xfree.
ld/
* emultempl/elf32.em (emit_note_gnu_build_id): New static var.
Replace all info->emit_note_gnu_build_id refs.
(id_note_section_size): Rename from
gld${EMULATION_NAME}_id_note_section_size.
(struct build_id_info): Delete.
(write_build_id): Rename from
gld${EMULATION_NAME}_write_build_id_section.
Update elf_tdata usage. Style, formatting.
(setup_build_id): New function.
(gld${EMULATION_NAME}_after_open): Use setup_build_id.
|
|
|
Jan Kratochvil
|
8a92335bfc |
gdb/
* elfread.c (elf_symfile_read): Limit separate debug info additions to
files with no separate debug info.
* objfiles.c (add_separate_debug_objfile): Add gdb_assert calls.
* symfile.c (read_symbols): Call find_separate_debug_file_in_section
only for files with no separate debug info.
gdb/testsuite/
* gdb.base/gnu-debugdata.exp): Create ${binfile}.debug,
${binfile}.mini_debuginfo-debuglink, add -k to xz, use now
${binfile}.mini_debuginfo-debuglink and
${binfile}.mini_debuginfo-debuglink.xz.
|
|
Joel Brobecker
|
28e7fd6234 |
Update years in copyright notice for the GDB files.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
|
|
Tom Tromey
|
d2f4b8feb9 |
* coffread.c (coff_symfile_init): Use set_objfile_data.
(coff_symfile_read): Use DBX_SYMFILE_INFO. * dbxread.c (dbx_objfile_data_key): New global. (dbx_symfile_init): Use set_objfile_data. (dbx_symfile_finish): Don't free deprecated_sym_stab_info. (dbx_free_symfile_info): New function. (coffstab_build_psymtabs, elfstab_build_psymtabs): Use DBX_SYMFILE_INFO. (stabsect_build_psymtabs): Use set_objfile_data. (_initialize_dbxreadb): Initialize dbx_objfile_data_key. * elfread.c (elf_symtab_read): Use DBX_SYMFILE_INFO, set_objfile_data. (free_elfinfo): Use DBX_SYMFILE_INFO. (elf_symfile_finish): Don't free deprecated_sym_stab_info. (elfstab_offset_sections): Use DBX_SYMFILE_INFO. * gdb-stabs.h (dbx_objfile_data_key): Declare. (DBX_SYMFILE_INFO): Rewrite to use objfile_data. * objfiles.h (struct objfile) <deprecated_sym_stab_info>: Remove. * somread.c (som_symfile_finish): Don't free deprecated_sym_stab_info. |
|
Yao Qi
|
85ddcc7021 |
gdb/
2012-11-21 Yao Qi <yao@codesourcery.com> PR tdep/7438 * gdbarch.sh (smash_text_address): Remove. * gdbarch.c, gdbarch.h: Regenerate. * arm-tdep.c (arm_smash_text_address): Remove. (arm_gdbarch_init): Don't call set_gdbarch_smash_text_address. * hppa-tdep.c (hppa_smash_text_address): Remove. (hppa_addr_bits_remove): Rename from hppa_smash_text_address. (hppa_gdbarch_init): Don't call set_gdbarch_smash_text_address. Caller update. * coffread.c (coff_symtab_read): Caller update. * dbxread.c (process_one_symbol): Likewise. * elfread.c (record_minimal_symbol): Likewise. * somread.c (som_symtab_read): Likewise. |
|
|
Joel Brobecker
|
d9eaeb59a4 |
Name of symbol missing when printing global variable's address
The build_address_symbolic funnction filters out data symbols if
their size is set to zero. But the problem is that the COFF symbol
table (for instance) does not provide any size information, leaving
the size to its default value of zero, thus always triggering
the filter.
This shows up when trying to print the address of a global variable
when debugging a Windows executable, for instance.
gdb/ChangeLog:
* symtab.h (struct minimal_symbol) [has_size]: New field.
(MSYMBOL_SIZE): Adjust to forbid macro from being used as lvalue.
(SET_MSYMBOL_SIZE, MSYMBOL_HAS_SIZE): New macros.
* printcmd.c (build_address_symbolic): Only filter out zero-sized
minimal symbols if the symbol's size is actually known.
* minsyms.c (prim_record_minimal_symbol_full): Adjust setting
of msymbol's size field. Add comment.
* elfread.c (elf_symtab_read, elf_rel_plt_read): Use
SET_MSYMBOL_SIZE to set the minimal symbol size.
|
|
|
Tom Tromey
|
706e37059f |
* elfread.c (elf_symtab_read): Update.
* objfiles.c (objfiles_bfd_data): New global. (get_objfile_bfd_data, free_objfile_per_bfd_storage) (objfile_bfd_data_free, set_objfile_per_bfd): New functions. (allocate_objfile, free_objfile): Update. (_initialize_objfiles): Initialize objfiles_bfd_data. * objfiles.h (struct objfile_per_bfd_storage): New. (struct objfile) <per_bfd>: New field. <filename_cache>: Remove. (set_objfile_per_bfd): Declare. * symfile.c (reread_symbols): Update. Call set_objfile_per_bfd. (allocate_symtab): Update. * symmisc.c (print_symbol_bcache_statistics): Update. (print_objfile_statistics): Print the size of the BFD obstack. gdb/testsuite * gdb.base/maint.exp: Update. |
|
|
Tom Tromey
|
08d2cd740c |
* symfile.c (separate_debug_file_exists): Update.
(gdb_bfd_open_maybe_remote): Rename from bfd_open_maybe_remote. (reread_symbols): Update. * elfread.c (build_id_verify): Update. * symfile.h (gdb_bfd_open_maybe_remote): Rename from bfd_open_maybe_remote. |
|
|
Tom Tromey
|
8ac244b433 |
* coffread.c (coff_symfile_read): Make a cleanup for 'debugfile'
and 'abfd'. * elfread.c (elf_symfile_read): Make a cleanup for 'debugfile' and 'abfd'. * jit.c (jit_bfd_try_read_symtab): Make a cleanup for 'nbfd'. * machoread.c (macho_add_oso_symfile): Make a cleanup for 'abfd'. (macho_symfile_read): Make a cleanup for 'dsym_bfd'. * objfiles.c (allocate_objfile): Acquire a new reference. * rs6000-nat.c (add_vmap): Don't acquire a BFD reference. * solib.c (solib_read_symbols): Don't acquire a BFD reference. * spu-linux-nat.c (spu_symbol_file_add_from_memory): Make a cleanup for 'nbfd'. * symfile-mem.c (symbol_file_add_from_memory): Make a cleanup for 'nbfd'. * symfile.c (symbol_file_add_with_addrs_or_offsets): Don't make a cleanup for 'abfd'. (symbol_file_add): Make a BFD cleanup. |
|
|
Tom Tromey
|
cbb099e886 |
* dwarf2read.c (try_open_dwo_file): Use gdb_bfd_ref and
gdb_bfd_unref. (free_dwo_file): Use gdb_bfd_unref. * cli/cli-dump.c: Include gdb_bfd.h. (bfd_openw_with_cleanup): Use gdb_bfd_ref. (bfd_openr_with_cleanup): Likewise. * windows-nat.c (windows_make_so): Use gdb_bfd_ref, gdb_bfd_unref. * utils.c: Include gdb_bfd.h. (do_bfd_close_cleanup): Use gdb_bfd_unref. * symfile.c: Include gdb_bfd.h. (separate_debug_file_exists): Use gdb_bfd_unref. (bfd_open_maybe_remote): Use gdb_bfd_ref. (symfile_bfd_open): Use gdb_bfd_ref, gdb_bfd_unref. (generic_load): Use gdb_bfd_ref. (reread_symbols): Use gdb_bfd_unref. * symfile-mem.c: Include gdb_bfd.h. (symbol_file_add_from_memory): Use make_cleanup_bfd_close. * spu-linux-nat.c (spu_bfd_open): Use gdb_bfd_ref, gdb_bfd_unref. * solib.c: Include gdb_bfd.h. (solib_bfd_fopen): Use gdb_bfd_ref. (solib_bfd_open): Use gdb_bfd_unref. (free_so_symbols): Use gdb_bfd_unref. (reload_shared_libraries_1): Use gdb_bfd_unref. * solib-spu.c: Include gdb_bfd.h. (spu_bfd_fopen): Use gdb_bfd_ref, gdb_bfd_unref. * solib-pa64.c (pa64_solib_create_inferior_hook): Use gdb_bfd_ref, gdb_bfd_unref. * solib-frv.c: Include gdb_bfd.h. (enable_break2): Use gdb_bfd_unref. * solib-dsbt.c: Include gdb_bfd.h. (enable_break2): Use gdb_bfd_unref. * solib-darwin.c: Include gdb_bfd.h. (darwin_solib_get_all_image_info_addr_at_init): Use gdb_bfd_ref, gdb_bfd_unref. (darwin_bfd_open): Use gdb_bfd_unref. * rs6000-nat.c (add_vmap): Use gdb_bfd_ref, gdb_bfd_unref. * remote-mips.c: Include gdb_bfd.h. (mips_load_srec): Use gdb_bfd_ref. (pmon_load_fast): Use gdb_bfd_ref. * remote-m32r-sdi.c: Include gdb_bfd.h. (m32r_load): Use gdb_bfd_ref. * record.c: Include gdb_bfd.h. (record_save_cleanups): Use gdb_bfd_unref. (cmd_record_save): Use gdb_bfd_unref. * procfs.c (insert_dbx_link_bpt_in_file): Use gdb_bfd_ref, gdb_bfd_unref. * objfiles.h (gdb_bfd_close_or_warn): Remove. (gdb_bfd_ref, gdb_bfd_unref): Move to gdb_bfd.h. * objfiles.c: Include gdb_bfd.h. (free_objfile): Use gdb_bfd_unref. (gdb_bfd_close_or_warn, gdb_bfd_ref, gdb_bfd_unref): Move to gdb_bfd.c. * machoread.c (macho_add_oso_symfile): Use gdb_bfd_unref. (macho_symfile_read_all_oso): Use gdb_bfd_ref, gdb_bfd_unref. (macho_check_dsym): Likewise. * m32r-rom.c: Include gdb_bfd.h. (m32r_load): Use gdb_bfd_ref. (m32r_upload_command): Use gdb_bfd_ref. * jit.c: Include gdb_bfd.h. (jit_bfd_try_read_symtab): Use gdb_bfd_ref, gdb_bfd_unref. * gdb_bfd.h: New file. * gdb_bfd.c: New file. * gcore.c: Include gdb_bfd.h. (create_gcore_bfd): Use gdb_bfd_ref. (do_bfd_delete_cleanup): Use gdb_bfd_unref. (gcore_command): Use gdb_bfd_unref. * exec.c: Include gdb_bfd.h. (exec_close): Use gdb_bfd_unref. (exec_close_1): Use gdb_bfd_unref. (exec_file_attach): Use gdb_bfd_ref. * elfread.c: Include gdb_bfd.h. (build_id_verify): Use gdb_bfd_unref. * dsrec.c: Include gdb_bfd.h. (load_srec): Use gdb_bfd_ref. * corelow.c: Include gdb_bfd.h. (core_close): Use gdb_bfd_unref. (core_open): Use gdb_bfd_ref. * bfd-target.c: Include gdb_bfd.h. (target_bfd_xclose): Use gdb_bfd_unref. (target_bfd_reopen): Use gdb_bfd_ref. * Makefile.in (SFILES): Add gdb_bfd.c. (HFILES_NO_SRCDIR): Add gdb_bfd.h. (COMMON_OBS): Add gdb_bfd.o. |
|
|
Sergio Durigan Junior
|
6bac747387 |
2012-07-18 Sergio Durigan Junior <sergiodj@redhat.com>
* elfread.c (elf_get_probe_argument_count): Remove `objfile' argument. (elf_compile_to_ax): Likewise. * infrun.c (insert_exception_resume_from_probe): Likewise. (check_exception_resume): Remove `objfile' variable. * probe.c (find_probe_by_pc): Remove `objfile' argument. (struct probe_and_objfile, probe_and_objfile_s): Delete. (collect_probes): Adjust return value to `VEC (probe_p) *'. (compare_entries): Rename to... (compare_probes): ...this. Adjust function to work with `struct probe *'. Rename variables `ea' and `eb' to `pa' and `pb' respectively. (gen_ui_out_table_header_info): Adjust `probes' argument to be `VEC (probe_p) *'. (print_ui_out_info): Adjust argument to be `struct probe *'. (info_probes_for_ops): Adjust internal computations to use `VEC (probe_p) *'. (probe_safe_evaluate_at_pc): Refactor to not pass `objfile' anymore. * probe.h (struct probe_ops) <get_probe_argument_count, compile_to_ax, gen_info_probes_table_values>: Remove `objfile' argument. (struct probe) <objfile>: New field. (find_probe_by_pc): Remove `objfile' argument. * stap-probe.c (stap_parse_probe_arguments): Likewise. (stap_get_probe_argument_count): Likewise. (stap_get_arg): Likewise. (stap_evaluate_probe_argument): Likewise. (stap_compile_to_ax): Likewise. (compile_probe_arg): Refactor not to pass `objfile' anymore. (handle_stap_probe): Fill `objfile' field from `struct probe'. (stap_gen_info_probes_table_header): Remove `objfile' argument. * symfile.h (struct sym_probe_fns) <sym_evaluate_probe_argument, sym_compile_to_ax>: Likewise. |
|
|
Doug Evans
|
45cfd46896 |
* NEWS: Mention new options "set debug dwarf2-read" and
"set debug symtab-create". * dwarf2read.c (dwarf2_read_debug): New static global. (dwarf2_build_psymtabs_hard): Add debugging printfs. (process_queue): Ditto. (process_full_comp_unit): Ditto. (_initialize_dwarf2_read): Add new option "set debug dwarf2-read". * elfread.c (elf_symfile_read): Add debugging printf. * minsyms.c (install_minimal_symbols): Ditto. * psymtab.c (allocate_psymtab): Ditto. * symfile.c (allocate_symtab): Ditto. * symtab.c (symtab_create_debug): New global. (_initialize_symtab): Add new option "set debug symtab-create". * symtab.h (symtab_create_debug): Declare. doc/ * gdb.texinfo (Debugging Output): Document debug options dwarf2-read and symtab-create. |
|
|
Doug Evans
|
422d65e705 |
* symtab.h (minimal_symbol): New member created_by_gdb.
* elfread.c (elf_symtab_read): Set created_by_gdb for @plt minsym created by gdb. * symtab.c (lookup_symbol_in_objfile_from_linkage_name): New function. (search_symbols): Call it instead of lookup_symbol. Skip symbols created by gdb. Only scan minsyms if nfiles == 0. testsuite: * gdb.base/info-fun.exp: New file. * gdb.base/info-fun.c: New file. * gdb.base/info-fun-solib.c: New file. |
|
|
Sergio Durigan Junior
|
22e048c9dd |
2012-05-18 Sergio Durigan Junior <sergiodj@redhat.com>
* ada-lang.c: * ada-tasks.c: * ada-varobj.c: * amd64-darwin-tdep.c: * arm-symbian-tdep.c: * arm-tdep.c: * avr-tdep.c: * ax-gdb.c: * bfin-linux-tdep.c: * breakpoint.c: * c-valprint.c: * cli/cli-cmds.c: * coffread.c: * cp-support.c: * cris-tdep.c: * dwarf2-frame-tailcall.c: * dwarf2-frame.c: * dwarf2expr.c: * dwarf2loc.c: * dwarf2read.c: * elfread.c: * eval.c: * expprint.c: * f-valprint.c: * frv-tdep.c: * h8300-tdep.c: * hppa-hpux-tdep.c: * hppa-tdep.c: * hppanbsd-tdep.c: * i386-nto-tdep.c: * i386-tdep.c: * i387-tdep.c: * ia64-tdep.c: * jit.c: * linespec.c: * linux-tdep.c: * lm32-tdep.c: * m2-valprint.c: * m32c-tdep.c: * m32r-rom.c: * m32r-tdep.c: * m68k-tdep.c: * m68klinux-tdep.c: * mi/mi-main.c: * microblaze-tdep.c: * mips-linux-tdep.c: * mips-tdep.c: * mn10300-tdep.c: * p-valprint.c: * parse.c: * ppc-linux-tdep.c: * ppc-sysv-tdep.c: * printcmd.c: * python/py-finishbreakpoint.c: * python/py-inferior.c: * python/py-infthread.c: * python/py-type.c: * python/python.c: * remote-fileio.c: * remote-m32r-sdi.c: * remote-mips.c: * reverse.c: * rl78-tdep.c: * rs6000-aix-tdep.c: * rs6000-tdep.c: * s390-tdep.c: * score-tdep.c: * sh64-tdep.c: * skip.c: * solib-darwin.c: * solib-dsbt.c: * solib-frv.c: * sparc-tdep.c: * spu-multiarch.c: * spu-tdep.c: * stack.c: * symfile.c: * symtab.c: * tic6x-tdep.c: * tracepoint.c: * v850-tdep.c: * valarith.c: * valprint.c: * value.c: * xcoffread.c: * xtensa-tdep.c: * ada-lang.c: * ada-tasks.c: * ada-varobj.c: * amd64-darwin-tdep.c: * arm-symbian-tdep.c: * arm-tdep.c: Delete unused variables. |
|
Maciej W. Rozycki
|
6a3a010ba6 |
gdb/
* breakpoint.h (bp_location): Add related_address member. * inferior.h (get_return_value): Take a pointer to struct value instead of struct type for the function requested. * value.h (using_struct_return): Likewise. * gdbarch.sh (return_value): Take a pointer to struct value instead of struct type for the function requested. * breakpoint.c (set_breakpoint_location_function): Initialize related_address for bp_gnu_ifunc_resolver breakpoints. * elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the requested function's address to gdbarch_return_value. * eval.c (evaluate_subexp_standard): Pass the requested function's address to using_struct_return. * infcall.c (call_function_by_hand): Pass the requested function's address to using_struct_return and gdbarch_return_value. * infcmd.c (get_return_value): Take a pointer to struct value instead of struct type for the function requested. (print_return_value): Update accordingly. (finish_command_continuation): Likewise. * stack.c (return_command): Pass the requested function's address to using_struct_return and gdbarch_return_value. * value.c (using_struct_return): Take a pointer to struct value instead of struct type for the function requested. Pass the requested function's address to gdbarch_return_value. * python/py-finishbreakpoint.c (finish_breakpoint_object): New function_value member, replacing function_type. (bpfinishpy_dealloc): Update accordingly. (bpfinishpy_pre_stop_hook): Likewise. (bpfinishpy_init): Likewise. Record the requested function's address. * mips-tdep.c (mips_fval_reg): New enum. (mips_o32_push_dummy_call): For MIPS16 FP doubles do not swap words put in GP registers. (mips_o64_push_dummy_call): Update a comment. (mips_o32_return_value): Take a pointer to struct value instead of struct type for the function requested and use it to check if using the MIPS16 calling convention. Return the designated general purpose registers for floating-point values returned in MIPS16 mode. (mips_o64_return_value): Likewise. * ppc-tdep.h (ppc_sysv_abi_return_value): Update prototype. (ppc_sysv_abi_broken_return_value): Likewise. (ppc64_sysv_abi_return_value): Likewise. * alpha-tdep.c (alpha_return_value): Take a pointer to struct value instead of struct type for the function requested. * amd64-tdep.c (amd64_return_value): Likewise. * amd64-windows-tdep.c (amd64_windows_return_value): Likewise. * arm-tdep.c (arm_return_value): Likewise. * avr-tdep.c (avr_return_value): Likewise. * bfin-tdep.c (bfin_return_value): Likewise. * cris-tdep.c (cris_return_value): Likewise. * frv-tdep.c (frv_return_value): Likewise. * h8300-tdep.c (h8300_return_value): Likewise. (h8300h_return_value): Likewise. * hppa-tdep.c (hppa32_return_value): Likewise. (hppa64_return_value): Likewise. * i386-tdep.c (i386_return_value): Likewise. * ia64-tdep.c (ia64_return_value): Likewise. * iq2000-tdep.c (iq2000_return_value): Likewise. * lm32-tdep.c (lm32_return_value): Likewise. * m32c-tdep.c (m32c_return_value): Likewise. * m32r-tdep.c (m32r_return_value): Likewise. * m68hc11-tdep.c (m68hc11_return_value): Likewise. * m68k-tdep.c (m68k_return_value): Likewise. (m68k_svr4_return_value): Likewise. * m88k-tdep.c (m88k_return_value): Likewise. * mep-tdep.c (mep_return_value): Likewise. * microblaze-tdep.c (microblaze_return_value): Likewise. * mn10300-tdep.c (mn10300_return_value): Likewise. * moxie-tdep.c (moxie_return_value): Likewise. * mt-tdep.c (mt_return_value): Likewise. * ppc-linux-tdep.c (ppc_linux_return_value): Likewise. * ppc-sysv-tdep.c (ppc_sysv_abi_return_value): Likewise. (ppc_sysv_abi_broken_return_value): Likewise. (ppc64_sysv_abi_return_value): Likewise. * ppcnbsd-tdep.c (ppcnbsd_return_value): Likewise. * rl78-tdep.c (rl78_return_value): Likewise. * rs6000-aix-tdep.c (rs6000_return_value): Likewise. * rx-tdep.c (rx_return_value): Likewise. * s390-tdep.c (s390_return_value): Likewise. * score-tdep.c (score_return_value): Likewise. * sh-tdep.c (sh_return_value_nofpu): Likewise. (sh_return_value_fpu): Likewise. * sh64-tdep.c (sh64_return_value): Likewise. * sparc-tdep.c (sparc32_return_value): Likewise. * sparc64-tdep.c (sparc64_return_value): Likewise. * spu-tdep.c (spu_return_value): Likewise. * tic6x-tdep.c (tic6x_return_value): Likewise. * v850-tdep.c (v850_return_value): Likewise. * vax-tdep.c (vax_return_value): Likewise. * xstormy16-tdep.c (xstormy16_return_value): Likewise. * xtensa-tdep.c (xtensa_return_value): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. gdb/testsuite/ * gdb.base/return-nodebug.exp: Also test float and double types. |
|
|
Alan Modra
|
45dfa85a1e |
Replace all uses of bfd_abs_section, bfd_com_section, bfd_und_section
and bfd_ind_section with their _ptr variants, or use corresponding bfd_is_* macros. |
|
|
Sergio Durigan Junior
|
55aa24fb2e |
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com>
Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value. |
|
|
Jan Kratochvil
|
e4ab2fad14 |
gdb/
Code cleanup. * charset.c (find_charset_names): Remove variables ix and elt. Use free_char_ptr_vec. * elfread.c (build_id_to_debug_filename): New variables debugdir_vec, back_to and ix. Use dirnames_to_char_ptr_vec. Remove variable debugdir_end. New variable debugdir_len. * gdb_vecs.h (free_char_ptr_vec, make_cleanup_free_char_ptr_vec) (dirnames_to_char_ptr_vec_append, dirnames_to_char_ptr_vec): New declarations. * progspace.c (clear_program_space_solib_cache): Remove variables ix and elt. Use free_char_ptr_vec. * source.c (add_path): Remove variables argv, arg and argv_index. New variables dir_vec, back_to, ix and name. Use dirnames_to_char_ptr_vec_append. Use freeargv instead of make_cleanup_freeargv. Remove variable separator. Simplify the code no longer expecting DIRNAME_SEPARATOR. (openp): Remove variable p, p1 and len. New variables dir_vec, back_to, ix and dir. Use dirnames_to_char_ptr_vec. Simplify the code no longer expecting DIRNAME_SEPARATOR. * symfile.c (find_separate_debug_file): New variables debugdir_vec, back_to and ix. Use dirnames_to_char_ptr_vec. Remove variable debugdir_end. * utils.c (free_char_ptr_vec, do_free_char_ptr_vec) (make_cleanup_free_char_ptr_vec, dirnames_to_char_ptr_vec_append) (dirnames_to_char_ptr_vec): New functions. |
|
|
Jan Kratochvil
|
c70a6932bb |
gdb/
* arm-linux-tdep.c (arm_linux_copy_svc): Reset stale FRAME. * breakpoint.c (until_break_command): Likewise. * elfread.c (elf_gnu_ifunc_resolver_stop): Likewise. * infcall.c (call_function_by_hand): Likewise. * infcmd.c (finish_forward): Likewise. * infrun.c (insert_exception_resume_breakpoint): Likewise. |
|
|
Doug Evans
|
28ee876ac0 | * elfread.c (elf_symfile_segments): Fix warning text. | |
|
Doug Evans
|
2c02bd7290 |
* blockframe.c (find_pc_partial_function_gnu_ifunc): Change type of
"name" parameter to const char ** from char **. All callers updated. (find_pc_partial_function): Ditto. (cache_pc_function_name): Change type to const char * from char *. * symtab.h ((find_pc_partial_function_gnu_ifunc): Update. (find_pc_partial_function): Update. * alpha-tdep.h (struct gdbarch_tdep, member pc_in_sigtramp): Change type of "name" parameter to const char * from char *. All uses updated. * arch-utils.c (generic_in_solib_return_trampoline): Change type of "name" parameter to const char * from char *. * arch-utils.h (generic_in_solib_return_trampoline): Update. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Change type of "name" parameter to const char * from char *. * gdbarch.sh (in_solib_return_trampoline): Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Update. * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Update. * m32r-linux-tdep.c (m32r_linux_pc_in_sigtramp): Change type of "name" parameter to const char * from char *. * skip.c (skip_function_pc): Ditto. * sparc-sol2-tdep.c (sparc_sol2_pc_in_sigtramp): Ditto. * sparc-tdep.h (sparc_sol2_pc_in_sigtramp): Update. * sparc64fbsd-tdep.c (sparc64fbsd_pc_in_sigtramp): Ditto. * sparc64nbsd-tdep.c (sparc64nbsd_pc_in_sigtramp): Ditto. * sparc64obsd-tdep.c (sparc64obsd_pc_in_sigtramp): Ditto. * sparcnbsd-tdep.c (sparc32nbsd_pc_in_sigtramp): Ditto. * sparcobsd-tdep.c (sparc32obsd_pc_in_sigtramp): Ditto. * nbsd-tdep.c (nbsd_pc_in_sigtramp): Similary for "func_name". * nbsd-tdep.h (nbsd_pc_in_sigtramp): Update. |
|
|
Joel Brobecker
|
0b30217134 |
Copyright year update in most files of the GDB Project.
gdb/ChangeLog:
Copyright year update in most files of the GDB Project.
|
|
|
Tom Tromey
|
0af1e9a54b |
* elfread.c (elf_symtab_read): Put the filename in the filename
bcache. |
|
|
Joel Brobecker
|
828cfa8d0b |
try ignoring bad PLT entries in ELF symbol tables
Comment says it all:
/* On ia64-hpux, we have discovered that the system linker
adds undefined symbols with nonzero addresses that cannot
be right (their address points inside the code of another
function in the .text section). This creates problems
when trying to determine which symbol corresponds to
a given address.
We try to detect those buggy symbols by checking which
section we think they correspond to. Normally, PLT symbols
are stored inside their own section, and the typical name
for that section is ".plt". So, if there is a ".plt"
section, and yet the section name of our symbol does not
start with ".plt", we ignore that symbol. */
gdb/ChangeLog:
* elfread.c (elf_symtab_read): Ignore undefined symbols with
nonzero addresses if they do not correspond to a .plt section
when one is available in the objfile.
|