* target.h (struct target_ops): New field to_auxv_parse.
* auxv.c (default_auxv_parse): New, renamed from previous
target_auxv_parse.
(target_auxv_parse): Try to call target method. Fallback to
default_auxv_parse if not found.
* procfs.c (procfs_auxv_parse): New.
(init_procfs_ops): On Solaris, in 64-bit mode, install
procfs_auxv_parse.
* gdbthread.h (add_thread_with_info): New.
* linux-thread-db.c: Add some documentation.
(GET_LWP, GET_PID, GET_THREAD, is_lwp, is_thread, BUILD_LWP): Delete.
(struct private_thread_info): Remove th_valid and ti_valid.
Replace ti with tid.
(thread_get_info_callback): Do not add TID to the new ptid. Do
not cache th or ti.
(thread_db_map_id2thr, lwp_from_thread): Delete functions.
(thread_from_lwp): Assert that the LWP is set. Do not add TID to the
new PTID.
(attach_thread): Handle an already-existing thread. Use
add_thread_with_info. Cache the th and tid.
(detach_thread): Verify that private was set. Remove verbose
argument and printing. Update caller.
(thread_db_detach): Do not adjust inferior_ptid.
(clear_lwpid_callback, thread_db_resume, thread_db_kill): Delete.
(check_event, find_new_threads_callback): Do not add TID to the new PTID.
(thread_db_wait): Do not use lwp_from_thread.
(thread_db_pid_to_str): Use the cached TID.
(thread_db_extra_thread_info): Check that private is set.
(same_ptid_callback): Delete.
(thread_db_get_thread_local_address): Do not use it or check
is_thread. Check that private is set. Assume that the thread
handle is already cached.
(init_thread_db_ops): Remove to_resume and to_kill.
* thread.c (add_thread_with_info): New.
(add_thread): Use it.
* linux-nat.c (find_thread_from_lwp): Delete.
(exit_lwp): Do not use it. Check print_thread_events. Print before
deleting the thread.
(GET_PID, GET_LWP, BUILD_LWP, is_lwp): Move to...
* linux-nat.h (GET_PID, GET_LWP, BUILD_LWP, is_lwp): ...here.
* inf-ttrace.c (inf_ttrace_wait): Use print_thread_events and
printf_unfiltered for thread exits.
* procfs.c (procfs_wait): Likewise.
2008-03-21 Pedro Alves <pedro@codesourcery.com>
* gdb.threads/fork-child-threads.exp: Test next over fork.
* thread.c (add_thread_silent): Renamed
from add_thread.
(print_thread_events): New variable definition.
(show_print_thread_events): New function.
(_initialize_thread): Add "set print thread-events" and
"show print thread-events" commands.
(add_thread): Announce new thread.
* gdbthread.h (add_thread_silent): Declare.
(print_thread_events): New variable declaration.
* inf-ttrace.c (inf_ttrace_wait): Don't
inform about new thread, as add_thread is always
called too, and will take care of that.
* infrun.c (handle_inferior_event): Likewise.
* procfs.c (procfs_wait): Likewise.
* remote.c (remote_currthread): Likewise.
* sol-thread.c (sol_thread_wait): Likewise.
* win32-nat.c (get_win32_debug_event): Likewise.
* linux-thread-db.c (attach_thread): Likewise.
Remove the verbose parameter.
(check_event): Make detach_thread be verbose
only if print_thread_events is set.
* linux-nat.c (lin_lwp_attach_lwp): Don't inform
about new thread. This is called only from
linux-thread-db.c:attach_thread, which will take care.
Remove the verbose parameter.
* linux-nat.h (lin_lwp_attach_lwp): Adjust prototype.
Joseph Myers <joseph@codesourcery.com>
* configure.ac: Check for *-*-solaris2.1[[0-9]]* instead of
*-*-solaris2.1[[0-9]].
* configure: Regenerate.
* procfs.c (proc_set_current_signal): If redelivering a signal,
reuse the current siginfo if possible.
testsuite:
* gdb.base/siginfo-addr.exp, gdb.base/siginfo-addr.c: New.
(dbx_link_shadow_contents): New static global variable.
(procfs_wait, case <PR_SYSEXIT>): Handle syssgi events.
(procfs_wait, case <FLTBPT>): Remove the __dbx_link brekapoint
if we just hit it.
(procfs_init_inferior): Enable syssgi() syscall trace if appropriate.
Reset dbx_link_bpt_addr as the address of __dbx_link() may change
from run to run.
(procfs_create_inferior): Remove syssgi syscall-exit notifications
after the inferior has been forked.
(remove_dbx_link_breakpoint): New function.
(dbx_link_addr): New function.
(insert_dbx_link_bpt_in_file): New function.
(insert_dbx_link_bpt_in_region): New function.
(insert_dbx_link_breakpoint): New function.
(proc_trace_syscalls_1): New function, extracted from
proc_trace_syscalls.
(proc_trace_syscalls): Replace extract code by call to
proc_trace_syscalls_1.
* solib-irix.c (disable_break): Remove stop_pc assertion, as it
is no longer valid.
* procfs.c (procfs_init_inferior): Assume that
START_INFERIOR_TRAPS_EXPECTED is defined.
* config/ns32k/nbsdaout.mt (TM_FILE): Set to tm-ns32k.h.
* config/ns32k/tm-nbsd.h: Delete file,
START_INFERIOR_TRAPS_EXPECTED already defined as 2.
* procfs.c (procfs_xfer_partial): New function.
(init_procfs_ops): Use that for procfs_ops.to_xfer_partial.
* Makefile.in (procfs.o): Add $(auxv_h) dep.
* procfs.c (procfs_make_note_section): If we can read
TARGET_OBJECT_AUXV data, add an NT_AUXV note containing it.
* linux-proc.c (linux_make_note_section): Likewise.
* gcore.c (gcore_command): Use gcore_default_target instead of NULL.
(default_gcore_mach): Just return 0, work around a problem in bfd.
(default_gcore_target): OK to return NULL if exec_bfd is null.
(make_mem_sec): Use a cast, avoid a warning.
* procfs.c (find_memory_regions_callback): Use a cast instead of
calling host_pointer_to_address (which complains if
sizeof (host pointer) != sizeof (target pointer)).
(procfs_make_note_section): Avoid overflow in psargs string.
* procfs.c (procfs_make_note_section): Make the default
implementation return an error.
2002-02-13 Rodney Brown <rbrown64@csc.com.au>
* procfs.c (procfs_make_note_section): Provide a default definition
(for alpha-dec-osf4.0f). Fix typos.
2002-02-11 Michael Snyder <msnyder@redhat.com>
* procfs.c: Include elf-bfd.h (for elfcore_write functions).
(gcore section): Ifdef for Solaris and Unixware only.
(procfs_do_thread_registers): Unixware needs one lwpstatus
per thread (not one prstatus or pstatus).
(procfs_make_note_section): Iterate only over kernel threads (lwps),
not over all gdb threads. For unixware, call elfcore_write_pstatus
once before iterating over threads.
Implement a "generate-core-file" command in gdb, save target state.
* gcore.c: New file. Implement new command 'generate-core-file'.
Save a corefile image of the current state of the inferior.
* linux-proc.c: Add linux-specific code for saving corefiles.
* target.h (struct target_ops): Add new target vectors for saving
corefiles; to_find_memory_regions and to_make_corefile_notes.
(target_find_memory_regions): New macro.
(target_make_corefile_notes): New macro.
* target.c (update_current_target): Inherit new target methods.
(dummy_find_memory_regions): New place-holder method.
(dummy_make_corefile_notes): New place-holder method.
(init_dummy_target): Initialize new dummy target vectors.
* exec.c (exec_set_find_memory_regions): New function.
Allow the exec_ops vector for memory regions to be taken over.
(exec_make_note_section): New function, target vector method.
* defs.h (exec_set_find_memory_regions): Export prototype.
* procfs.c (proc_find_memory_regions): New function, corefile method.
(procfs_make_note_section): New function, corefile method.
(init_procfs_ops): Set new target vector pointers.
(find_memory_regions_callback): New function.
(procfs_do_thread_registers): New function.
(procfs_corefile_thread_callback): New function.
* sol-thread.c (sol_find_memory_regions): New function.
(sol_make_note_section): New function.
(init_sol_thread_ops): Initialize new target vectors.
* inftarg.c (inftarg_set_find_memory_regions): New function.
Allow to_find_memory_regions vector to be taken over.
(inftarg_set_make_corefile_notes): New function.
Allow to_make_corefile_notes vector to be taken over.
* thread-db.c (thread_db_new_objfile): Don't activate thread-db
interface layer if not target_has_execution (may be a corefile).
* config/i386/linux.mh: Add gcore.o to NATDEPFILES.
* config/sparc/sun4sol2.mh: Ditto.
* config/alpha/alpha-linux.mh: Ditto.
* config/arm/linux.mh: Ditto.
* config/i386/x86-64linux.mh: Ditto.
* config/ia64/linux.mh: Ditto.
* config/m68k/linux.mh: Ditto.
* config/mips/linux.mh: Ditto.
* config/powerpc/linux.mh: Ditto.
* config/sparc/linux.mh: Ditto.
Abstract the functionality of iterating over mapped memory
regions into a general purpose iterator function.
* procfs.c (iterate_over_mappings): New function, general purpose
iterator for memory sections.
(proc_iterate_over_mappings): Reimplement using iterate_over_mappings.
(solib_mappings_callback): New function, callback for above.
(info_proc_mappings): Reimpliment using iterate_over_mappings.
(info_mappings_callback): New function, callback for above.
* procfs.c (proc_set_watchpoint): Add cast to suppress warning.
* procfs.c (info_proc_cmd): Add the 'mappings' sub-command that
was dropped a few years ago, when procfs.c was rewritten.
(info_proc_mappings): New function, implement 'info proc mappings'.
(mappingflags): New function.
(_initialize_procfs): Document new option to 'info proc' command.
From Adam Mirowski <Adam.Mirowski@Sun.COM>
Fixed Insight on Solaris. It was not possible to debug a process
because of EINTR "errors".
* procfs.c: (procfs_wait): if proc_wait_for_stop() fails
with EINTR, retry the call.
* gregset.h: New file. Typedefs for gdb_gregset_t and
gdb_fpregset_t, prototypes for supply_gregset and friends.
* procfs.c: Include gregset.h. Delete local prototypes for
supply_gregset etc., and local typedef gdb_gregset_t etc.
* sol-thread.c: Include gregset.h, delete local prototypes,
add appropriate casts to gdb_gregset_t.
* uw-thread.c, lin-thread.c, core-sol2.c, core-regset.c,
sparc-tdep.c, ptx4-nat.c, ppc-linux-nat.c, mipsv4-nat.c,
m88k-nat.c, m68klinux-nat.c, m68k-tdep.c, irix5-nat.c,
irix4-nat.c, ia64-linux-nat.c, i386v4-nat.c, cxux-nat.c,
arm-linux-nat.c, alpha-nat.c: Include gregset.h.
* config/nm-linux.h: Define GDB_GREGSET_T, GDB_FPREGET_T.
* config/sparc/tm-sun4sol2.h: Ditto.
* gdbarch.sh: Add FP0_REGNUM to list of multi-arched register numbers.
* gdbarch.c, gdbarch.h: Regenerate.
* core-regset.c: Change FP0_REGNUM to a runtime test.
* procfs.c: Ditto.
* sun3-nat.c: Ditto.
* sparc-tdep.c: Ditto.
* i386mach-nat.c: Remove unnecessary ifdef for FP0_REGNUM.
* ptx4-nat.c: Ditto.
* sol-thread.c (sol_thread_create_inferior): only add the thread
to the thread list if it is not already in there.
(prototypes for thread_db func ptrs): pretty up formatting.
* procfs.c: Cleanup of procfs tracing. Move defines and
prototypes to proc-utils.h
* proc-utils.h: Define tracing macros. Declare trace functions.
* proc-api.c: Make procfs tracing a runtime option.
(prepare_to_trace): New function, abstracted out of several
places. Open a trace file if one is required.
(ioctl_with_trace, write_with_trace, open_with_trace,
close_with_trace, wait_with_trace, lseek_with_trace):
Report errno if an error occurs in a system call.
(write_with_trace): Make 2nd arg void *, to agree with write.
* procfs.c (many functions): change int cmd; to long cmd;
Solaris /proc API calls this parameter a long, and requires it
for 64-bit hosts (where sizeof(long) != sizeof(int)). UnixWare
calls it an int, but on existing UnixWare hosts, int and long
are the same size. So long it must be. If a future UnixWare
version has problems with this, we'll have to use autoconf.
* proc-api.c (write_with_trace): use long instead of int.
* procfs.c (comments): Eliminate "???" in comments, which GCC
wants to interpret as a trigraph. (fill_gregset, supply_gregset,
fill_fpregset, supply_fpregset): declare.
(procfs_wait): Sysargs is a long, change printf format to match.
(test-mapping, mapping_test, test_mapping_cmd) Remove (test only).
init only nonzero fields, leave to_require_attach and
to_require_detach empty, not needed for /proc systems yet.
(_initialize_procfs): Call init_procfs_ops.
* infrun.c (set/show scheduler-locking) New command. Set a
mode bit that will control how GDB attempts to control thread
scheduling for step, continue, etc. (resume): make use of
the schedule-locking mode.
* target.h (struct target_ops): new field to_has_thread_control.
* sol-thread.c: initialize target_ops to_has_thread_control.
* procfs.c: ditto.
* target.c: ditto.
* m3-nat.c: ditto.
* remote.c: ditto.
* hpux-thread.c: ditto.
* procfs.c: Added replacement macros for LWP stuff. Fixed support
for UnixWare / SVR4.2MP targets and any targets which use
multi-file /proc entries. Fixed support for hardware watchpoints.
* solib.c: SCO needs some of the same code as SunOS. Change
preprocessor conditionals.
* config/i386/i386sco5.mt: New file.
* config/i386/tm-i386sco5.h: New file.
* config/i386/i386sco5.mh (NATDEPFILES): add i386v-nat.o.
* config/i386/nm-i386v42mp.h
(TARGET_HAS_HARDWARE_WATCHPOINTS): define.
Add other macros for hardware assisted watchpoints.
* config/i386/nm-i386sco5.h: Correct attributions.
(TARGET_HAS_HARDWARE_WATCHPOINTS): define.
* config/i386/nm-linux.h (target_remote_watchpoint): Pass
'type' through to i386_insert_watchpoint.
Mon Apr 20 14:12:30 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* infrun.c (wait_for_inferior): Don't add signalled processes
as new threads.
* procfs.c (wait_fd): Note if LWP has exited.
(procfs_wait): use GETPID to get process ID.
NOTE: I didn't commit Kean's changes to configure.host/configure.tgt
yet because they are kind of bogus and I'm punting back to him to let
him figure out what he's trying to do. So configuring for UnixWare
may not work just yet.
Update support for x86 Solaris 2.
* config/i386/tm-i386sol2.h, nm-i386sol2.h: New configuration
files for x86 Solaris 2.
* config/i386/i386sol2.mt, i386sol2.mh: Use them.
* config/sparc/tm-sun4sol2.h (PROCFS_GET_CARRY): New macro, extract
carry flag from a given regset.
(IS_STATIC_TRANSFORM_NAME): New macro, check if a symbol name
is a SunPro transformed name.
* i386-tdep.c (sunpro_static_transform_name): New function to
extract the source name from a SunPro transformed name.
* inferior.h (procfs_first_available, procfs_get_pid_fd):
Add prototypes.
* infrun.c (wait_for_inferior): Handle breakpoint hit in
signal handler without intervening stop in sigtramp.
* procfs.c (procfs_lwp_creation_handler): Use PROCFS_GET_CARRY
instead of direct access to the status register.
(procfs_get_pid_fd): New function, returns procfs fd for a given pid.
* sol-thread.c (ps_lgetLDT): New function, returns LDT for a given
lwpid.
(sol_find_new_threads): Handle failed libthread_db initialization
gracefully.
* stabsread.c (define_symbol): Use IS_STATIC_TRANSFORM_NAME
to check for a SunPro transformed symbol name.
unconditionally_kill_inferior): Undo Oct 26 1996 and Apr 26 1997
changes to trace PRFS_STOPTERM and handle PR_DEAD.
These changes tried to work around a problem with an early DU 4.0
release, but they trigger subtle timing dependent kernel bugs
in older OSF/1 releases.
* procfs.c (init_procinfo): new function, abstracts some code
shared by create_procinfo and do_attach;
(procfs_set_inferior_syscall_traps): new function, abstracts
some code needed by procfs_init_inferior, do_attach, and
procfs_lwp_creation_handler; (procfs_first_available): new
function, find any LWP that's runnable; (procfs_thread_alive):
replace stub function with real implementation;
(procfs_lwp_creation_handler): fix bug starting new child
threads; (info_proc): bug fixes and enhancements for the
"INFO PROCESSES" command; (close_procinfo_file): call new
function "delete_thread" to cleanup GDB's thread database;
(proc_init_failed): add new argument "kill", to control whether
process is killed (so this function can be shared by
create_procinfo and do_attach); (procfs_exit_handler): handle
exit from an attached process, and cleanup procinfo handles
when the process exits; (procfs_resume, procfs_wait): cleanup
after a thread when it exits; (do_attach, do_detach): handle
attached processes with multiple threads; plus some general
improvements in the diagnostic output.
* sol-thread.c (sol_thread_alive): replace stub with real
implementation; (thread_to_lwp, lwp_to_thread): enhance to
handle threads that may have exited; (sol_thread_attach): add
startup setup stuff; (sol_thread_detach): add unpush_target
call; (sol_thread_mourn_inferior): add unpush_target call;
(sol_thread_wait, sol_thread_resume): enhance to deal with
thread exit cleanly; (sol_thread_new_objfile,
sol_thread_pid_to_str): detect unsuccessful startup and
don't crash; plus some general cleanup.
* thread.c (delete_thread): new function, allows targets to
notify gdb when a thread is no longer valid.
* infrun.c (wait_for_inferior): don't try to detect a new
thread on receiving a TARGET_EXITED event.
* procfs.c: Minor changes to make pre-ANSI compilers happy.
(procfs_notice_signals): Copy traced signal set back to
pi->prrun.pr_trace.
(unconditionally_kill_inferior): If PR_DEAD is defined,
rerun inferior after killing it.
* procfs.c: Substantial (but incomplete) changes to support
sysv4.2mp procfs as implemented in UnixWare 2.1. The procinfo
struct now has substructs like struct flt_ctl instead of
just a fltset_t and has a ctl_fd, status_fd, as_fd, and
map_fd instead of a single fd. Non-sysv4.2mp procfs models
still have the structs and multiple fds, but don't use the
entire struct and the four fds all point to the same thing.
We use PROCFS_USE_READ_WRITE to decide whether to talk to
procfs with reads/writes or use ioctl instead. We use
HAVE_MULTIPLE_PROC_FDS to determine whether procfs really has
multiple fds or not. PROC_NAME_FMT is split out into
CTL_PROC_NAME_FMT, AS_PROC_NAME_FMT, MAP_PROC_NAME_FMT,
STATUS_PROC_NAME_FMT.
(procfs_notice_signals): now a necessary wrapper around
(notice_signals): which are the new guts for noticing signals
(open_proc_file): gets a new flag arg used in sysv4.2mp to
determine whether or not to attempt to open the ctl_fd.
(procfs_read_status): new local function, reads procfs status
(procfs_write_pcwstop): new local function, writes a PCWSTOP
(procfs_write_pckill): new local function, writes a PCKILL
(unconditionally_kill_inferior): remove signo since we now
just call procfs_write_pckill().
(procfs_xfer_memory): call lseek with SEEK_SET rather than 0
(proc_iterate_over_mappings): the whole function is ifdefed
on UNIXWARE to keep things readable.
Expanded the syscall_table to include new potential sysv4.2mp
members. Note that all ifdefs of UNIXWARE should be eliminated
if possible or renamed to describe what's being selected for a
bit better. Sysv4.2mp and IRIX both have SYS_sproc so the
IRIX specific code now also checks it's not UNIXWARE.
* config/i386/tm-i386v42mp.h: also define HAVE_PSTATUS_T,
HAVE_NO_PRRUN_T, PROCFS_USE_READ_WRITE, and UNIXWARE
* config/mips/nm-irix4.h: set CTL_PROC_NAME_FMT et al to
"/debug/%d" as PROC_NAME_FMT used to be
* procfs.c (wait_fd): Handle EINTR error return from poll
by restarting the poll.
* defs.h (PIDGET): Define a default version that just
returns its argument unchanged.
* inflow.c (terminal_init_inferior): Eliminate #ifdef
of PIDGET and fold both alternatives into common code.
(pass_signal): Use PIDGET for pid passed to kill().
the entry to the exit system call to detect termination of the
inferior stopped working. Trace termination of the inferior via
PRFS_STOPTERM instead.
(procfs_init_inferior): Do not trace entry to exit system call
if PIOCSSPCACT is defined.
(procfs_wait): Handle PR_DEAD event, which signals the termination
of the inferior if PRFS_STOPTERM is set.
* mdebugread.c (parse_partial_symbols): Ignore stNil section
start address symbols.
* sparc-tdep.c (get_saved_register): Get saved PC from the
frame info if not in innermost frame.
* (procfs_pid_to_str): New routine to print out thread id's in an
intelligible manner.
* sol-thread.c (sol_thread_fetch_registers): Re-order manner in
which supply_register is called to fix bug with writing writing
individual regs.
* config/sparc/tm-sun4sol2.h: Define default for
target_pid_to_str in case host lacks libthread_db.
config/sparc/nm-sun4sol2.h config/sparc/sun4sol2.mh
config/sparc/tm-sun4sol2.h: Use autoconf to config Solaris thread
and pthread support, since pre-2.5 systems don't come with
libthread_db.so.1.
* procfs.c (info_proc): Use int instead of id_t. Old versions of
Irix don't see to define this.
infrun.c, mac-nat.c, procfs.c, remote.c, sol-thread.c, thread.c,
win32-nat.c, config/nm-lynx.h: Rename thread.h to gdbthread.h to
avoid conflict with Solaris /usr/include/thread.h.
returns a possibly modified pid.
* inftarg.c (ptrace_him): Now returns pid;
* m3-nat.c (m3_trace_him): Now returns pid;
* infcmd.c (run_command): Minor cleanup.
* infrun.c (wait_for_inferior): Add another check for one_stepped
near where we read the pc to avoid erroneously setting
random_signal for multi-threaded support.
* procfs.c: Add support for Solaris LWPs. Remove def of
LOSING_POLL. Many cleanups... Several workarounds for Solaris
lossage. System call entry and exit are now handled by
dynamically registered handlers.
* (syscallname): Don't barf when handed an unknown syscall
number.
* (info_proc_syscalls): Ditto.
* sol-thread.c: New file. Implements Solaris thread support.
* symfile.c (symbol_file_add): Add call to target_new_objfile to
notify target-dependent code about new symbol tables.
* (clear_symtab_users): Call target_new_objfile to notify it of
the removal of all symbol tables.
* target.c (push_target): Make sure that to_close is non-zero
before calling it.
* target.h (target_new_objfile): Provide default.
* config/alpha/nm-osf2.h: Define LOSING_POLL because this version
of OSF can't hack using poll with /proc.
* config/sparc/nm-sun4sol2.h (target_new_objfile): Define to be
sol-thread-new-objfile.
* config/sparc/sun4sol2.mh: Add sol-thread.o to NATDEFFILES, and
add libthread_db.so.1 to NAT_CLIBS.
* config/sparc/tm-sun4sol2.h: Define PIDGET, TIDGET, and
target_pid_to_str.
AT_name tag is missing.
* procfs.c (procfs_stopped_by_watchpoint): Fix logic when
FLTWATCH and FLTKWATCH are defined.
* remote.c (remote_read_bytes): Advance memaddr for transfers,
return number of bytes transferred for partial reads.
* top.c (init_signals): Reset SIGTRAP to SIG_DFL.
target.h.
* target.h: Macros from breakpoint.c. Conditionalize based on
TARGET_HAS_HARDWARE_WATCHPOINTS.
* i386v-nat.c procfs.c: Use TARGET_HAS_HARDWARE_WATCHPOINTS
instead of TARGET_CAN_USE_HARDWARE_WATCHPOINT to enable watchpoint
code.
* config/i386/nm-linux.h, config/mips/nm-irix4.h,
config/pa/nm-hppab.h, config/sparc/tm-sparclite.h: #define
TARGET_HAS_HARDWARE_WATCHPOINTS to enable watchpoint code.
with the real source file name.
* dbxread.c (end_psymtab): Handle static functions in the
SOFUN_ADDRESS_MAYBE_MISSING case by passing pst->filename
to lookup_minimal_symbol.
(process_one_symbol): Ignore extra outermost context from
SunPRO cc and acc.
* stabsread.c (define_symbol): Do not complain for SunPRO
static variable encoding if STATIC_TRANSFORM_NAME is defined.
* sparc-tdep.c, config/sparc/tm-sun4sol2.h
(sunpro_static_transform_name): Renamed from
solaris_static_transform_name.
* config/sparc/tm-sun4os4.h (STATIC_TRANSFORM_NAME):
Define to sunpro_static_transform_name for acc 3.0 compiled
executables.
* procfs.c, config/alpha/nm-osf2.h (PROCFS_DONT_TRACE_FAULTS):
Renamed from PROCFS_DONT_TRACE_IFAULT, don't trace any faults
if defined.
* procfs.c (info_proc_siginfo): Cast sip->si_addr to
`unsigned long' and use `lx' format for printing it.
that contains a static instance of the class.
* cp-valprint.c (dont_print_vb_obstack): Renamed from
dont_print_obstack, made static.
(dont_print_statmem_obstack): New obstack, controls printing
of static member classes.
(_initialize_cp_valprint): Initialize it.
(cp_print_static_field): New function, handles printing of
static members.
(cp_print_value_fields): New parameter dont_print_statmem to
handle recursive printing of static member classes, use
cp_print_static_field to handle printing of static members.
* c-valprint.c (cp_print_value_fields): Update prototype and
call to include additional dont_print_statmem parameter.
* c-valprint.c, f-valprint.c (dont_print_obstack): Remove unused
extern declaration.
* alpha-tdep.c, findvar.c, infptrace.c: Include <string.h>.
* config/alpha/tm-alpha.h (FRAME_FIND_SAVED_REGS): Call
alpha_find_saved_regs if fi->saved_regs is still NULL.
* elfread.c (elf_symtab_read): Ensure that the filename field
of a minsym is nonempty. Ignore solib trampoline symbols from
the main symbol table, they might have a bogus value.
* procfs.c (set_proc_siginfo), config/alpha/alpha-osf2.mh:
Fix typos in comments.
Add procfs support for Alpha OSF/1-2.x.
* config/alpha/nm-osf.h: Renamed from nm-alpha.h, generic
OSF/1 native support.
* config/alpha/alpha-osf1.mh (NAT_FILE): Changed accordingly.
(MUNCH_DEFINE): Removed.
* config/alpha/alpha-osf2.mh, config/alpha/nm-osf2.h: New files
for procfs support.
* configure.in (alpha-dec-osf*): Use alpha-osf2.mh for OSF/1
release 2.x and higher, else alpha-osf1.mh, as the procfs support
in release 1.x is incomplete.
* Makefile.in (ALLCONFIG): Add config/alpha/alpha-osf2.mh.
* alpha-nat.c (supply_gregset, fill_gregset, supply_fpgregset,
fill_fpgregset): New routines for procfs support.
* inftarg.c (_initialize_inftarg): Don't add ptrace support
if we have an optional procfs and /proc is accessible.
* procfs.c: Include sys/fault.h and sys/syscall.h before
including sys/procfs.h.
(unconditionally_kill_inferior): If PROCFS_NEED_PIOCSSIG_FOR_KILL
is defined, additionally perform a PIOCSSIG to really terminate
the inferior.
(create_procinfo): Always return a result.
(create_procinfo, do_attach): Don't trace T_IFAULT faults if
PROCFS_DONT_TRACE_IFAULT is defined.
(procfs_init_inferior): Use START_INFERIOR_TRAPS_EXPECTED as
argument to startup_inferior if it is defined.
(proc_set_exec_trap): If PIOCSSPCACT is defined, use it instead
of tracing exits from exec system calls. Needed for the user level
loader under Alpha OSF/1.
(do_detach): Clear any pending signal if we want to detach from
a process without a signal.
(set_proc_siginfo): If PROCFS_DONT_PIOCSSIG_CURSIG is defined,
don't issue a PIOCSSIG if pr_cursig already contains the signal we
intend to set.
(info_proc_signals): If PROCFS_SIGPEND_OFFSET is defined, the
pending signals are numbered from 1 instead of 0.
(info_proc_mappings): Increase size of output format for addresses
if BFD_HOST_64_BIT is defined.
(procfs_stop): Renamed from child_stop.
(_initialize_procfs): Don't add procfs support if we have an
optional procfs and /proc is not accessible.
core_ops to current_target after adding the shared libraries.
* partial-stab.h (N_EXCL), dbxread.c (add_old_header_file,
find_corresponding_bincl_psymtab): Change `repeated header not seen'
error to a complaint, simplify complaint.
* procfs.c (signalname, errnoname): Make `name' const.
* symfile.c (reread_symbols): Use filename from old BFD to
reopen the objfile.
* values.c (record_latest_value): Don't record value in the
history chain until we are sure there won't be an error.
attach_flag (this check was performed by the callers). Also check
inferior_thisrun_terminal.
* inftarg.c (child_wait), lynx-nat.c (child_wait),
procfs.c (wait_fd), symm-nat.c (child_wait): Don't check
attach_flag in deciding whether to call set_sigint_trap and
clear_sigint_trap.
detection of new processes.
* procfs.c (create_procinfo): Return pointer to new procinfo
structure.
* (do_detach): Spacing & formatting cleanup.
* (procfs_wait): Move wait_again label to ensure that we really
wait again. On exit from fork, release new child from gdbs'
clutches.
* (procfs_set_sproc_trap): Enable trapping of fork and vfork.
(NORETURN): Define as "volatile" only for older GCCs.
(ATTR_NORETURN): Define for newer GCCs.
* procfs.c (proc_init_filed): Add ATTR_NORETURN to declaration.
Move "no debugging symbols found" test to symfile.c.
* symfile.c (syms_from_objfile, reread_symbols): Add
"no debugging symbols found" test.
* coffread.c (init_stringtab): Handle stripped files with a
stringtab offset of zero gracefully.
* osfsolib.c (solib_create_inferior_hook): Use DYNAMIC flag from
BFD instead of stop_pc heuristic to determine if it is a dynamically
linked object file.
* procfs.c (wait_fd): Handle ENOENT error return from PIOCWSTOP
ioctl, it indicates that the process has exited.
bp_watchpoint_scope breakpoints.
(struct breakpoint): Add val_chain and related_breakpoint fields
for use by watchpoints.
* breakpoint.c (within_scope): Delete. No longer used.
(TARGET_CAN_USE_HARDWARE_WATCHPOINT): Provide default definition.
(target_{remove,insert}_watchpoint): Likewise.
(can_use_hardware_watchpoint): New function.
(remove_breakpoint): New function to remove a single breakpoint
or hardware watchpoint.
(insert_breakpoints): Handle insertion of hardware watchpoints.
Store a copy of the value chain derived from the watchpoint
expression.
(remove_breakpoints): Simplify by using remove_breakpoint.
(delete_breakpoint): Likewise.
(watchpoint_check): Delete the watchpoint and watchpoint scope
breakpoints when the watchpoint goes out of scope. Save & restore
the current frame after checking watchpoints.
(breakpoint_init_inferior): Likewise (restarting the program
makes all local watchpoints go out of scope).
(bpstat_stop_status): Handle hardware watchpoints much like normal
watchpoints. Delete the watchpoint and watchpoint scope breakpoint
when the watchpoint goes out of scope. Remove and reinsert all
breakpoints before returning if we stopped when a hardware watchpoint
fired.
(watch_command): Use a hardware watchpoint when possible. If
watching a local expression, build a scope breakpoint too.
(map_breakpoint_numbers): Also call given function for any
related breakpoints.
(disable_breakpoint): Never disable a scope breakpoint.
(enable_breakpoint): Handle hardware breakpoints much like normal
breakpoints, but recompute the watchpoint_scope breakpoint's
frame and address (if we have an associated scope breakpoint).
(read_memory_nobpt): Handle hardware watchpoints like normal
watchpoints. When necessary handle watchpoint_scope breakpoints.
(print_it_normal, bpstat_what, breakpoint_1, mention): Likewise.
(clear_command, breakpoint_re_set_one, enable_command): Likewise.
(disable_command): Likewise.
* blockframe.c (find_frame_addr_in_frame_chain): New function.
Extern prototype added to frame.h
* infrun.c (wait_for_inferior): Set current_frame and select
a frame before checking if we stopped due to a hardare watchpoint
firing. Handle stepping over hardware watchpoints.
(normal_stop): Remove unnecessary call to select_frame.
* value.h (value_release_to_mark): Declare.
* values.c (value_release_to_mark): New function.
* procfs.c (procfs_wait): Add cases for hardware watchpoints.
(procfs_set_watchpoint, procfs_stopped_by_watchpoint): New functions.
* hppab-nat.c (hppa_set_watchpoint): New function.
* config/pa/nm-hppab.h (STOPPED_BY_WATCHPOINT): Define.
(HAVE_STEPPABLE_WATCHPOINT): Define.
(TARGET_CAN_USE_HARDWARE_WATCHPOINT): Define.
(target_{insert,delete}_watchpoint): Define.
Pedro Alves
Vladimir Prus
Daniel Jacobowitz
Joel Brobecker
Michael Snyder
Joseph Myers
Markus Deuling
Ulrich Weigand
Eli Zaretskii
Andrew Cagney
Mark Kettenis
Roland McGrath
Stephane Carrez
Kevin Buettner
Fernando Nasser
Jason Molenda
Stan Shebs
Mark Alexander
David Taylor
Felix Lee
Peter Schauer
Geoffrey Noer
Fred Fish
Stu Grossman
J.T. Conklin
Jeff Law
Jim Kingdon
Thomas Lord