Code stolen from arm.cc.
PR 17566
* powerpc.cc (Target_powerpc::Scan::local): Use add_local_section
when adding dynamic relocations against section symbols.
Remove native-only core file handling on Sparc Solaris. Instead,
enable the sparc target generic core regset logic on Solaris by
providing appropriate register offset maps.
Thanks to Joel Brobecker for testing!
gdb/
* config/sparc/sol2.mh (NATDEPFILES): Remove core-regset.o.
* sparc-sol2-tdep.c: Include "regset.h".
(sparc32_sol2_supply_core_gregset): New function.
(sparc32_sol2_collect_core_gregset): Likewise.
(sparc32_sol2_supply_core_fpregset): Likewise.
(sparc32_sol2_collect_core_fpregset): Likewise.
(sparc32_sol2_gregset, sparc32_sol2_fpregset): New variables.
(sparc32_sol2_init_abi): Set tdep->gregset/sizeof_gregset and
tdep->fpregset/sizeof_fpregset.
* sparc64-sol2-tdep.c: Include "regset.h".
(sparc64_sol2_supply_core_gregset): New function.
(sparc64_sol2_collect_core_gregset): Likewise.
(sparc64_sol2_supply_core_fpregset): Likewise.
(sparc64_sol2_collect_core_fpregset): Likewise.
(sparc64_sol2_gregset, sparc64_sol2_fpregset): New variables.
(sparc64_sol2_init_abi): Set tdep->gregset/sizeof_gregset and
tdep->fpregset/sizeof_fpregset.
The definition does not use the typedef for the dtor function pointer
type that the declaration uses. It's a cosmetic-only change.
ChangeLog:
* common/cleanups.c (make_cleanup_dtor): Use typedef for dtor
type.
On Windows, a recent gnulib update imported the lstat module, and
this caused a remote-sim.c build failure in struct host_callback_struct:
In file included from /[...]/gdb/remote-sim.c:34:0:
/[...]/gdb/../include/gdb/callback.h:93:9: error: duplicate member '_stati64'
int (*lstat) (host_callback *, const char *, struct stat *);
^
What happens it that gnulib's stat.h makes the following defines:
/* Large File Support on native Windows. */
#if 1
# define stat _stati64
#endif
and then:
#if 1
# if ! 0
/* mingw does not support symlinks, therefore it does not have lstat. But
without links, stat does just fine. */
# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
# define lstat stat
# endif
So, the following fields in struct host_callback_struct...
int (*stat) (host_callback *, const char *, struct stat *);
int (*fstat) (host_callback *, int, struct stat *);
int (*lstat) (host_callback *, const char *, struct stat *);
... get translated to...
int (*_stati64) (host_callback *, const char *, struct _stati64 *);
int (*_fstati64) (host_callback *, int, struct _stati64 *);
int (*_stati64) (host_callback *, const char *, struct _stati64 *);
... which causes two fields to have the same name.
This patch fixes the issue by renaming the stat-related fields
by adding a "to_" prefix, similar to what is done in GDB's
target_ops vector.
include/gdb/ChangeLog:
* callback.h (struct host_callback_struct) <to_stat>: Renamed
from "stat".
<to_fstat>: Renamed from "fstat".
<to_lstat>: Renamed from "lstat".
sim/common/ChangeLog:
* sim-io.c (sim_io_stat, sim_io_fstat): Adjust calls to "stat"
and "fstat" callbacks by calls to "to_stat" and "to_fstat" (resp)
callbacks following renaming in callback.h.
* syscall.c (cb_syscall): Likewise. Adjust calls to "lstat"
callback by call to "to_lstat" callback
sim/cris/ChangeLog:
* traps.c (cris_break_13_handler): Adjust call to "fstat" callback
by call to "to_fstat" following renaming in callback.h.
sim/h8300/ChangeLog:
* compile.c (sim_resume): Adjust calls to "stat" and "fstat"
callbacks by calls to "to_stat" and "to_fstat" (resp) callbacks
following renaming in callback.h.
This patch reverts the addition of cplus_specific added here:
2010-07-16 Sami Wagiaalla <swagiaal@redhat.com>
* symtab.h (symbol_set_demangled_name): Now takes an optional objfile*
argument.
(cplus_specific): New struct.
* symtab.c (symbol_set_demangled_name): Updated.
Use cplus_specific for cplus symbols.
(symbol_get_demangled_name): Retrive the name from the cplus_specific
struct for cplus symbols.
(symbol_init_language_specific): Set cplus_specific for cplus symbols.
(symbol_set_names): Pass objfile to symbol_set_demangled_name.
* symtab.c (symbol_init_cplus_specific): New function.
It was added in anticipation of improved template support:
https://sourceware.org/ml/gdb-patches/2010-05/msg00594.htmlhttps://sourceware.org/ml/gdb-patches/2010-07/msg00284.html
However, minsyms pay the price for this space too.
For my standard benchmark this patch gets back 44MB of memory
when gdb starts. [There's still ~440MB of memory used
by the demangled ELF symbols of this benchmark, but that's another topic.]
When the improved templated support is added,
I wonder if this can be moved to struct symbol.
Hmmm, we already have a special version of
struct symbol for templates (struct template_symbol).
gdb/ChangeLog:
* symtab.c (symbol_init_cplus_specific): Delete.
(symbol_set_demangled_name): Remove special c++ support.
(symbol_get_demangled_name, symbol_set_language): Ditto.
* symtab.h (struct cplus_specific): Delete.
(struct general_symbol_info) <language_specific>: Remove
cplus_specific.
This patch reverts the change in elf_x86_64_check_relocs and the partial
change in elf_x86_64_adjust_dynamic_symbol. Instead, we discard space
in PIE for relocs against symbols which turn out to need copy relocs.
* elf64-x86-64.c (elf_x86_64_check_relocs): Revert the last
change.
(elf_x86_64_adjust_dynamic_symbol): Don't check !info->shared
with ELIMINATE_COPY_RELOCS.
(elf_x86_64_allocate_dynrelocs): For PIE, discard space for
relocs against symbols which turn out to need copy relocs.
This patch allows copy relocs for non-GOT pc-relative relocation in PIE.
bfd/
* elf64-x86-64.c (elf_x86_64_create_dynamic_sections): Always
allow copy relocs for building executables.
(elf_x86_64_check_relocs): Allow copy relocs for non-GOT
pc-relative relocation in shared object.
(elf_x86_64_adjust_dynamic_symbol): Allocate copy relocs for
PIE.
(elf_x86_64_relocate_section): Don't copy a pc-relative
relocation into the output file if the symbol needs copy reloc.
ld/testsuite/
* ld-x86-64/copyreloc-lib.c: New file.
* ld-x86-64/copyreloc-main.c: Likewise.
* ld-x86-64/copyreloc-main.out: Likewise.
* ld-x86-64/copyreloc-main1.rd: Likewise.
* ld-x86-64/copyreloc-main2.rd: Likewise.
* ld-x86-64/x86-64.exp: Run copyreloc tests.
The test case builds two copies of the program, one with the compile
option "ldflags=-Wl,-Ttext=0x1000000" and the other with the address
changed to 0x2000000. However, when linking with ld.bfd, the
resulting executables crash early in ld.so on S390 and i386.
Analysis of the crash: The default linker script establishes a certain
order of loadable sections, and the option "-Ttext" effectively splits
these into an "unaffected" lot (everything before .text) and an
"affected" lot. The affected lot is placed at the given address,
whereas the unaffected lot stays at its default address. The
unaffected lot starts at an aligned address plus Elf header sizes,
which is good if it is the first LOAD segment (like on AMD64). But if
the affected lot comes first instead (like on S390 and i386), the PHDR
doesn't fit there and is placed *outside* any LOAD segments. Then the
PHDR is not mapped when the loader gets control, and the loader runs
into a segmentation fault while trying to access it.
Since we are lucky about the order of segments on AMD64, the test
succeeds there, but the resulting binaries are unusually large -- 2.1M
each, with lots of padding within.
When replacing '-Ttext' by '-Ttext-segment', the linker moves all
segments consistently, the binaries have normal sizes, and the test
case succeeds on all mentioned platforms.
Since old versions of the gold linker don't support '-Ttext-segment',
the patch also adds logic for falling back to '-Ttext'.
gdb/testsuite/ChangeLog:
* gdb.base/execl-update-breakpoints.exp: Specify the link address
with '-Ttext-segment' instead of '-Ttext'. Fall back to '-Ttext'
if the linker doesn't understand this.
In MIPS the relocation calculation only ignores the overflow checks for undefined
weak symbols on relocations associated with j/jal. This patch extends this to
the relocations used by the: b* instructions; pc/gp relative symbol offsets; and the
lwpc/ldpc MIPS r6 instructions.
bfd/
* elfxx-mips.c (mips_elf_calculate_relocation): Only check for overflow
on non-weak undefined symbols.
ld/testsuite/
* ld-mips-elf/mips-elf.exp: Add in undefined weak overflow tests for
o32, n32 and n64.
* ld-mips-elf/undefweak-overflow.s: New test.
* ld-mips-elf/undefweak-overflow.d: New test.
* ld-mips-elf/undefweak-overflow-n32.d: New test.
* ld-mips-elf/undefweak-overflow-n64.d: New test.
This patch sorts .opd relocs (see pr17666) and allows .opd sections
with a mix of 16 and 24 byte entries to be edited.
* elf64-ppc.c (OPD_NDX): Define. Use throughout for sizing/indexing
_opd_sec_data array, halving required memory.
(sort_r_offset): New function.
(ppc64_elf_edit_opd): Sort incoming relocs. Accept .opd
sections with a mix of 16 and 24 byte OPD entries. Don't
attempt to honour --non-overlapping-opd for .opd sections with
unexpected relocs. Simplify opd entry size calculations by
first finding the reloc for the next entry. Make edit loop
handle one opd entry per iteration, with an inner loop
handling relocs per entry.
Fix a typo in the expedited registers for s390-te-linux64.
gdb/ChangeLog:
* features/Makefile (s390-te-linux64-expedite): Replace
non-existant r14 and r15 by r14l and r15l, respectively.
* regformats/s390-te-linux64.dat: Regenerate.
gold/
* layout.cc (Layout::finish_dynamic_section): When '-z global'
is specified set DF_1_GLOBAL in DT_FLAGS_1 flags.
* options.h (General_options): New -z option (global).
PR gold/17578 notes that gold will print a warning about an executable stack
when the -z execstack option is given, even when there is no --warn_execstack
option. The warning is completely useless and unexpected, since the user
explicitly requested an executable stack, and did not even ask for warnings.
This patch fixes that, and adds an extra warning when --warn_execstack
and -z noexecstack are both given and an input file requires an executable
stack.
gold/
PR gold/17578
* layout.cc (Layout::layout_gnu_stack): Don't warn when -z execstack
is given.
(Layout::create_executable_stack_info): Warn when -z noexecstack is
given but some inputs require executable stack.
PR binutils/17512
* dwarf.h (struct dwarf_section): Add user_data field.
* dwarf.c (frame_need_space): Check for an over large register
number.
(display_debug_frames): Check the return value from
frame_need_space. Check for a CFA expression that is so long the
start address wraps around.
(debug_displays): Initialise the user_data field.
* objdump.c (load_specific_debug_section): Save the BFD section
pointer in the user_data field of the dwarf_section structure.
(free_debug_section): Update BFD section data when freeing section
contents.
* readelf.c (load_specific_debug_section): Initialise the
user_data field.
* archive.c (do_slurp_coff_armap): Add range checks to prevent
running off the end of the string table.
* compress.c (bfd_get_full_section_contents): Return a NULL
pointer for zero sized sections. Do not attempt to copy a buffer
onto itself.
* elf-attrs.c (_bfd_elf_parse_attributes): Check for an empty
header. Add range checks to avoid running off the end of the
section.
* elf.c (bfd_elf_get_str_section): Seek before allocating so that
if the seek fails, no memory is allocated.
(bfd_elf_string_from_elf_section): Do not allocate a string from a
non string section. It only leads to trouble later on.
(_bfd_elf_print_private_bfd_data): Check for there being too
little external dynamic data.
(bfd_section_from_shdr): Replace assertion with a failure mode.
(bfd_section_from_shdr): When walking a loaded group section use
the internal structure size, not the external size. Check for the
group section being empty.
* elf32-i386.c (elf_i386_rtype_to_howto): Replace assertion with a
failure mode.
* elfcode.h (elf_slurp_reloc_table): Likewise.
* reloc.c (bfd_perform_relocation): Avoid seg-fault if the howto
parameter is NULL.
The message displayed when using help() changed a bit with time, so this
adjusts the test accordingly.
gdb/testsuite/ChangeLog:
* gdb.python/python.exp: Change expected reply to help().
Remove native-only core file handling on GNU Hurd. Instead, enable the
x86 target generic core regset logic on the Hurd by providing an
appropriate register offset map.
Thanks to Samuel Thibault for testing!
gdb/
* config/i386/i386gnu.mh (NATDEPFILES): Remove core-regset.o.
* i386gnu-nat.c: Do not include <sys/procfs.h> or "gregset.h".
(CREG_OFFSET, creg_offset, CREG_ADDR): Remove.
(supply_gregset, supply_fpregset): Remove.
* i386gnu-tdep.c (i386gnu_gregset_reg_offset): New variable.
(i386gnu_init_abi): Set tdep->gregset_reg_offset, gregset_num_regs,
and sizeof_gregset.
PR binutils/17531
* dwarf.c (process_cu_tu_index): Check for an out of range row
index.
* elfcomm.c (adjust_relative_path): Change name_len parameter to
an unsigned long. Check for path length overflow.
(process_archive_index_and_symbols): Check for invalid header
size.
(setup_archive): Add checks for invalid archives.
(get_archive_member_name): Add range checks.
* elfcomm.h (adjust_relative_path): Update prototyoe.
* readelf.c (process_archive): Add range checks.
When I skim configure.ac and Makefile.in in gdb/testsuite, I happen to
see that directory gdb.gdbtk is added to subdirs, however it doesn't
exist. gdb/testsuite/gdb.gdbtk was removed by the patch below,
[rfa] git repo fixup: delete gdb/testsuite/gdb.gdbtk
http://thread.gmane.org/gmane.comp.gdb.patches/61489
and we should cleanup configure.ac accordingly.
gdb/testsuite:
2014-12-01 Yao Qi <yao@codesourcery.com>
* configure.ac: Remove AC_ARG_ENABLE for gdbtk. Don't invoke
AC_CONFIG_SUBDIRS(gdb.gdbtk).
* configure: Re-generated.
There is already "add-auto-load-safe-path" which works
like "set auto-load safe-path" but in append mode.
There was missing an append equivalent for "set auto-load scripts-directory".
ABRT has directory /var/cache/abrt-di/ as an alternative one
to /usr/lib/debug/ . Therefore ABRT needs to use -iex parameters to add this
/var/cache/abrt-di/ directory as a first-class debuginfo directory.
Using absolute "set auto-load scripts-directory" would hard-code the path
possibly overriding local system directory additions; besides it would not be
nice anyway.
gdb/ChangeLog
2014-11-30 Jan Kratochvil <jan.kratochvil@redhat.com>
Add add-auto-load-scripts-directory.
* NEWS (Changes since GDB 7.8): Add add-auto-load-scripts-directory.
* auto-load.c (add_auto_load_dir): New function.
(_initialize_auto_load): Install it.
gdb/doc/ChangeLog
2014-11-30 Jan Kratochvil <jan.kratochvil@redhat.com>
Add add-auto-load-scripts-directory.
* gdb.texinfo (Auto-loading): Add add-auto-load-scripts-directory link.
(objfile-gdbdotext file): Add add-auto-load-scripts-directory.
I noticed in frame_id_eq() we were checking for the "l" frame_id being
invalid twice instead of checking both "l" and "r", so this patch
corrects it.
gdb/ChangeLog:
* frame.c (frame_id_eq): Fix the check for FID_STACK_INVALID.
On further reading of ISA manual it appears gas should have been
treating mftb and mftbu as extended mnemonics for mfspr, for ISA 2.03
and later.
opcodes/
* ppc-opc.c (powerpc_opcodes): Make mftb* generate mfspr for
power4 and later.
gas/testsuite/
* gas/ppc/a2.d: Update for mftb change.
* gas/ppc/476.d: Likewise.
PR 16452, 16457
* elflink.c (_bfd_elf_link_find_version_dependencies): Exclude
symbols from libraries that won't be listed in DT_NEEDED.
(elf_link_output_extsym): Don't output verdefs for such symbols.
This fixes a regression introduced by 6c659fc2c7.
gdb/ChangeLog:
* eval.c (evaluate_subexp): Check that thread stack temporaries
are not already enabled before enabling them.
I find local variables framereg and framesize is only used when cache
isn't NULL. This patch to move the code into "if (cache)" block.
gdb:
2014-11-29 Yao Qi <yao@codesourcery.com>
* arm-tdep.c (arm_analyze_prologue): Move local variables
'framereg' and 'framesize' to inner block. Move code to
inner block too.
gdb/ChangeLog:
* eval.c: Include gdbthread.h.
(evaluate_subexp): Enable thread stack temporaries before
evaluating a complete expression and clean them up after the
evaluation is complete.
* gdbthread.h: Include common/vec.h.
(value_ptr): New typedef.
(VEC (value_ptr)): New vector type.
(value_vec): New typedef.
(struct thread_info): Add new fields stack_temporaries_enabled
and stack_temporaries.
(enable_thread_stack_temporaries)
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary)
(value_in_thread_stack_temporaries): Declare.
* gdbtypes.c (class_or_union_p): New function.
* gdbtypes.h (class_or_union_p): Declare.
* infcall.c (call_function_by_hand): Store return values of class
type as temporaries on stack.
* thread.c (enable_thread_stack_temporaries): New function.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary): Likewise.
(value_in_thread_stack_temporaries): Likewise.
* value.c (value_force_lval): New function.
* value.h (value_force_lval): Declare.
gdb/testsuite/ChangeLog:
* gdb.cp/chained-calls.cc: New file.
* gdb.cp/chained-calls.exp: New file.
* gdb.cp/smartp.exp: Remove KFAIL for "p c2->inta".