This patch starts from the desire to eliminate
make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file &
friends a real C++ class hierarchy, and switches temporary
ui_file-like objects to stack-based allocation.
- mem_fileopen -> string_file
mem_fileopen is replaced with a new string_file class that is treated
as a value class created on the stack. This alone eliminates most
make_cleanup_ui_file_delete calls, and, simplifies code a whole lot
(diffstat shows around 1k loc dropped.)
string_file's internal buffer is a std::string, thus the "string" in
the name. This simplifies the implementation much, compared to
mem_fileopen, which managed growing its internal buffer manually.
- ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone
The new string_file class has a string() method that provides direct
writable access to the internal std::string buffer. This replaced
ui_file_as_string, which forced a copy of the same data the stream had
inside. With direct access via a writable reference, we can instead
move the string out of the string_stream, avoiding deep string
copying.
Related, ui_file_xstrdup calls are replaced with xstrdup'ping the
stream's string, and ui_file_obsavestring is replaced by
obstack_copy0.
With all those out of the way, getting rid of the weird ui_file_put
mechanism was possible.
- New ui_file::printf, ui_file::puts, etc. methods
These simplify / clarify client code. I considered splitting
client-code changes, like these, e.g.:
- stb = mem_fileopen ();
- fprintf_unfiltered (stb, "%s%s%s",
- _("The valid values are:\n"),
- regdesc,
- _("The default is \"std\"."));
+ string_file stb;
+ stb.printf ("%s%s%s",
+ _("The valid values are:\n"),
+ regdesc,
+ _("The default is \"std\"."));
In two steps, with the first step leaving fprintf_unfiltered (etc.)
calls in place, and only afterwards do a pass to change all those to
call stb.printf etc.. I didn't do that split, because (when I tried),
it turned out to be pointless make-work: the first pass would have to
touch the fprintf_unfiltered line anyway, to replace "stb" with
"&stb".
- gdb_fopen replaced with stack-based objects
This avoids the need for cleanups or unique_ptr's. I.e., this:
struct ui_file *file = gdb_fopen (filename, "w");
if (filename == NULL)
perror_with_name (filename);
cleanups = make_cleanup_ui_file_delete (file);
// use file.
do_cleanups (cleanups);
is replaced with this:
stdio_file file;
if (!file.open (filename, "w"))
perror_with_name (filename);
// use file.
- odd contorsions in null_file_write / null_file_fputs around when to
call to_fputs / to_write eliminated.
- Global null_stream object
A few places that were allocating a ui_file in order to print to
"nowhere" are adjusted to instead refer to a new 'null_stream' global
stream.
- TUI's tui_sfileopen eliminated. TUI's ui_file much simplified
The TUI's ui_file was serving a dual purpose. It supported being used
as string buffer, and supported being backed by a stdio FILE. The
string buffer part is gone, replaced by using of string_file. The
'FILE *' support is now much simplified, by making the TUI's ui_file
inherit from stdio_file.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* ada-lang.c (type_as_string): Use string_file.
* ada-valprint.c (ada_print_floating): Use string_file.
* ada-varobj.c (ada_varobj_scalar_image)
(ada_varobj_get_value_image): Use string_file.
* aix-thread.c (aix_thread_extra_thread_info): Use string_file.
* arm-tdep.c (_initialize_arm_tdep): Use string_printf.
* breakpoint.c (update_inserted_breakpoint_locations)
(insert_breakpoint_locations, reattach_breakpoints)
(print_breakpoint_location, print_one_detail_ranged_breakpoint)
(print_it_watchpoint): Use string_file.
(save_breakpoints): Use stdio_file.
* c-exp.y (oper): Use string_file.
* cli/cli-logging.c (set_logging_redirect): Use ui_file_up and
tee_file.
(pop_output_files): Use delete.
(handle_redirections): Use stdio_file and tee_file.
* cli/cli-setshow.c (do_show_command): Use string_file.
* compile/compile-c-support.c (c_compute_program): Use
string_file.
* compile/compile-c-symbols.c (generate_vla_size): Take a
'string_file &' instead of a 'ui_file *'.
(generate_c_for_for_one_variable): Take a 'string_file &' instead
of a 'ui_file *'. Use string_file.
(generate_c_for_variable_locations): Take a 'string_file &'
instead of a 'ui_file *'.
* compile/compile-internal.h (generate_c_for_for_one_variable):
Take a 'string_file &' instead of a 'ui_file *'.
* compile/compile-loc2c.c (push, pushf, unary, binary)
(print_label, pushf_register_address, pushf_register)
(do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a
'ui_file *'. Adjust.
* compile/compile.c (compile_to_object): Use string_file.
* compile/compile.h (compile_dwarf_expr_to_c)
(compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a
'ui_file *'.
* cp-support.c (inspect_type): Use string_file and obstack_copy0.
(replace_typedefs_qualified_name): Use string_file and
obstack_copy0.
* disasm.c (gdb_pretty_print_insn): Use string_file.
(gdb_disassembly): Adjust reference the null_stream global.
(do_ui_file_delete): Delete.
(gdb_insn_length): Use null_stream.
* dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file.
* dwarf2loc.c (dwarf2_compile_property_to_c)
(locexpr_generate_c_location, loclist_generate_c_location): Take a
'string_file &' instead of a 'ui_file *'.
* dwarf2loc.h (dwarf2_compile_property_to_c): Likewise.
* dwarf2read.c (do_ui_file_peek_last): Delete.
(dwarf2_compute_name): Use string_file.
* event-top.c (gdb_setup_readline): Use stdio_file.
* gdbarch.sh (verify_gdbarch): Use string_file.
* gdbtypes.c (safe_parse_type): Use null_stream.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use
string_file.
* guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a
'string_file *' instead of a 'ui_file *'.
(gdbscm_arch_disassemble): Use string_file.
* guile/scm-frame.c (frscm_print_frame_smob): Use string_file.
* guile/scm-ports.c (class ioscm_file_port): Now a class that
inherits from ui_file.
(ioscm_file_port_delete, ioscm_file_port_rewind)
(ioscm_file_port_put): Delete.
(ioscm_file_port_write): Rename to ...
(ioscm_file_port::write): ... this. Remove file_port_magic
checks.
(ioscm_file_port_new): Delete.
(ioscm_with_output_to_port_worker): Use ioscm_file_port and
ui_file_up.
* guile/scm-type.c (tyscm_type_name): Use string_file.
* guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print):
Use string_file.
* infcmd.c (print_return_value_1): Use string_file.
* infrun.c (print_target_wait_results): Use string_file.
* language.c (add_language): Use string_file.
* location.c (explicit_to_string_internal): Use string_file.
* main.c (captured_main_1): Use null_file.
* maint.c (maintenance_print_architecture): Use stdio_file.
* mi/mi-cmd-stack.c (list_arg_or_local): Use string_file.
* mi/mi-common.h (struct mi_interp) <out, err, log, targ,
event_channel>: Change type to mi_console_file pointer.
* mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush)
(mi_console_file_delete): Delete.
(struct mi_console_file): Delete.
(mi_console_file_magic): Delete.
(mi_console_file_new): Delete.
(mi_console_file::mi_console_file): New.
(mi_console_file_delete): Delete.
(mi_console_file_fputs): Delete.
(mi_console_file::write): New.
(mi_console_raw_packet): Delete.
(mi_console_file::flush): New.
(mi_console_file_flush): Delete.
(mi_console_set_raw): Rename to ...
(mi_console_file::set_raw): ... this.
* mi/mi-console.h (class mi_console_file): New class.
(mi_console_file_new, mi_console_set_raw): Delete.
* mi/mi-interp.c (mi_interpreter_init): Use mi_console_file.
(mi_set_logging): Use delete and tee_file. Adjust.
* mi/mi-main.c (output_register): Use string_file.
(mi_cmd_data_evaluate_expression): Use string_file.
(mi_cmd_data_read_memory): Use string_file.
(mi_cmd_execute, print_variable_or_computed): Use string_file.
* mi/mi-out.c (mi_ui_out::main_stream): New.
(mi_ui_out::rewind): Use main_stream and
string_file.
(mi_ui_out::put): Use main_stream and string_file.
(mi_ui_out::mi_ui_out): Remove 'stream' parameter.
Allocate a 'string_file' instead.
(mi_out_new): Don't allocate a mem_fileopen stream here.
* mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter.
(mi_ui_out::main_stream): Declare method.
* printcmd.c (eval_command): Use string_file.
* psymtab.c (maintenance_print_psymbols): Use stdio_file.
* python/py-arch.c (archpy_disassemble): Use string_file.
* python/py-breakpoint.c (bppy_get_commands): Use string_file.
* python/py-frame.c (frapy_str): Use string_file.
* python/py-framefilter.c (py_print_type, py_print_single_arg):
Use string_file.
* python/py-type.c (typy_str): Use string_file.
* python/py-unwind.c (unwind_infopy_str): Use string_file.
* python/py-value.c (valpy_str): Use string_file.
* record-btrace.c (btrace_insn_history): Use string_file.
* regcache.c (regcache_print): Use stdio_file.
* reggroups.c (maintenance_print_reggroups): Use stdio_file.
* remote.c (escape_buffer): Use string_file.
* rust-lang.c (rust_get_disr_info): Use string_file.
* serial.c (serial_open_ops_1): Use stdio_file.
(do_serial_close): Use delete.
* stack.c (print_frame_arg): Use string_file.
(print_frame_args): Remove local mem_fileopen stream, not used.
(print_frame): Use string_file.
* symmisc.c (maintenance_print_symbols): Use stdio_file.
* symtab.h (struct symbol_computed_ops) <generate_c_location>:
Take a 'string_file *' instead of a 'ui_file *'.
* top.c (new_ui): Use stdio_file and stderr_file.
(free_ui): Use delete.
(execute_command_to_string): Use string_file.
(quit_confirm): Use string_file.
* tracepoint.c (collection_list::append_exp): Use string_file.
* tui/tui-disasm.c (tui_disassemble): Use string_file.
* tui/tui-file.c: Don't include "ui-file.h".
(enum streamtype, struct tui_stream): Delete.
(tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen)
(tui_file_isatty, tui_file_rewind, tui_file_put): Delete.
(tui_file::tui_file): New method.
(tui_file_fputs): Delete.
(tui_file_get_strbuf): Delete.
(tui_file::puts): New method.
(tui_file_adjust_strbuf): Delete.
(tui_file_flush): Delete.
(tui_file::flush): New method.
* tui/tui-file.h: Tweak intro comment.
Include ui-file.h.
(tui_fileopen, tui_sfileopen, tui_file_get_strbuf)
(tui_file_adjust_strbuf): Delete declarations.
(class tui_file): New class.
* tui/tui-io.c (tui_initialize_io): Use tui_file.
* tui/tui-regs.c (tui_restore_gdbout): Use delete.
(tui_register_format): Use string_stream.
* tui/tui-stack.c (tui_make_status_line): Use string_file.
(tui_get_function_from_frame): Use string_file.
* typeprint.c (type_to_string): Use string_file.
* ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete.
(null_stream): New global.
(ui_file_delete): Delete.
(ui_file::ui_file): New.
(null_file_isatty): Delete.
(ui_file::~ui_file): New.
(null_file_rewind): Delete.
(ui_file::printf): New.
(null_file_put): Delete.
(null_file_flush): Delete.
(ui_file::putstr): New.
(null_file_write): Delete.
(ui_file::putstrn): New.
(null_file_read): Delete.
(ui_file::putc): New.
(null_file_fputs): Delete.
(null_file_write_async_safe): Delete.
(ui_file::vprintf): New.
(null_file_delete): Delete.
(null_file::write): New.
(null_file_fseek): Delete.
(null_file::puts): New.
(ui_file_data): Delete.
(null_file::write_async_safe): New.
(gdb_flush, ui_file_isatty): Adjust.
(ui_file_put, ui_file_rewind): Delete.
(ui_file_write): Adjust.
(ui_file_write_for_put): Delete.
(ui_file_write_async_safe, ui_file_read): Adjust.
(ui_file_fseek): Delete.
(fputs_unfiltered): Adjust.
(set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind)
(set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe)
(set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek)
(set_ui_file_data): Delete.
(string_file::~string_file, string_file::write)
(struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup)
(do_ui_file_as_string, ui_file_as_string): Delete.
(do_ui_file_obsavestring, ui_file_obsavestring): Delete.
(struct mem_file): Delete.
(mem_file_new): Delete.
(stdio_file::stdio_file): New.
(mem_file_delete): Delete.
(stdio_file::stdio_file): New.
(mem_fileopen): Delete.
(stdio_file::~stdio_file): New.
(mem_file_rewind): Delete.
(stdio_file::set_stream): New.
(mem_file_put): Delete.
(stdio_file::open): New.
(mem_file_write): Delete.
(stdio_file_magic, struct stdio_file): Delete.
(stdio_file_new, stdio_file_delete, stdio_file_flush): Delete.
(stdio_file::flush): New.
(stdio_file_read): Rename to ...
(stdio_file::read): ... this. Adjust.
(stdio_file_write): Rename to ...
(stdio_file::write): ... this. Adjust.
(stdio_file_write_async_safe): Rename to ...
(stdio_file::write_async_safe) ... this. Adjust.
(stdio_file_fputs): Rename to ...
(stdio_file::puts) ... this. Adjust.
(stdio_file_isatty): Delete.
(stdio_file_fseek): Delete.
(stdio_file::isatty): New.
(stderr_file_write): Rename to ...
(stderr_file::write) ... this. Adjust.
(stderr_file_fputs): Rename to ...
(stderr_file::puts) ... this. Adjust.
(stderr_fileopen, stdio_fileopen, gdb_fopen): Delete.
(stderr_file::stderr_file): New.
(tee_file_magic): Delete.
(struct tee_file): Delete.
(tee_file::tee_file): New.
(tee_file_new): Delete.
(tee_file::~tee_file): New.
(tee_file_delete): Delete.
(tee_file_flush): Rename to ...
(tee_file::flush): ... this. Adjust.
(tee_file_write): Rename to ...
(tee_file::write): ... this. Adjust.
(tee_file::write_async_safe): New.
(tee_file_fputs): Rename to ...
(tee_file::puts): ... this. Adjust.
(tee_file_isatty): Rename to ...
(tee_file::isatty): ... this. Adjust.
* ui-file.h (struct obstack, struct ui_file): Don't
forward-declare.
(ui_file_new, ui_file_flush_ftype, set_ui_file_flush)
(ui_file_write_ftype)
(set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs)
(ui_file_write_async_safe_ftype, set_ui_file_write_async_safe)
(ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype)
(set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind)
(ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put)
(ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype)
(set_ui_file_fseek): Delete.
(ui_file_data, ui_file_delete, ui_file_rewind)
(struct ui_file): New.
(ui_file_up): New.
(class null_file): New.
(null_stream): Declare.
(ui_file_write_for_put, ui_file_put): Delete.
(ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring):
Delete.
(ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen)
(gdb_fopen, tee_file_new): Delete.
(struct string_file): New.
(struct stdio_file): New.
(stdio_file_up): New.
(struct stderr_file): New.
(class tee_file): New.
* ui-out.c (ui_out::field_stream): Take a 'string_file &' instead
of a 'ui_file *'. Adjust.
* ui-out.h (class ui_out) <field_stream>: Likewise.
* utils.c (do_ui_file_delete, make_cleanup_ui_file_delete)
(null_stream): Delete.
(error_stream): Take a 'string_file &' instead of a 'ui_file *'.
Adjust.
* utils.h (struct ui_file): Delete forward declaration..
(make_cleanup_ui_file_delete, null_stream): Delete declarations.
(error_stream): Take a 'string_file &' instead of a
'ui_file *'.
* varobj.c (varobj_value_get_print_value): Use string_file.
* xtensa-tdep.c (xtensa_verify_config): Use string_file.
* gdbarch.c: Regenerate.
This changes gdbpy_breakpoint_cond_says_stop to use gdbpy_ref rather
than explicit reference management.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Use
gdbpy_ref.
Change py-breakpoint.c to use gdbpy_enter.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Use
gdbpy_enter.
(gdbpy_breakpoint_has_cond): Likewise.
This changes the event code in the Python layer to use
gdbpy_ref, simplifying the logic in many places.
It also changes evpy_emit_event not to steal a reference to its
argument. This is simpler to do now that gdbpy_ref is in use;
it's also a reasonable cleanup in its own right. While doing this I
realized that evpy_emit_event should not be calling gdbpy_print_stack
(all the outermost callers do this if needed), so I removed this as
well.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-threadevent.c (create_thread_event_object): Use
gdbpy_ref.
* python/py-stopevent.c (create_stop_event_object): Simplify.
(emit_stop_event): Use gdbpy_ref.
* python/py-signalevent.c (create_signal_event_object): Use
gdbpy_ref.
* python/py-newobjfileevent.c (create_new_objfile_event_object)
(emit_new_objfile_event, create_clear_objfiles_event_object)
(emit_clear_objfiles_event): Use gdbpy_ref.
* python/py-infevents.c (create_inferior_call_event_object)
(create_register_changed_event_object)
(create_memory_changed_event_object, emit_inferior_call_event)
(emit_memory_changed_event, emit_register_changed_event): Use
gdbpy_ref.
* python/py-exitedevent.c (create_exited_event_object)
(emit_exited_event): Use gdbpy_ref.
* python/py-event.h (evpy_emit_event): Remove
CPYCHECKER_STEALS_REFERENCE_TO_ARG annotation.
* python/py-event.c (evpy_emit_event): Use gdbpy_ref.
* python/py-continueevent.c (emit_continue_event): Use
gdbpy_ref.
* python/py-breakpoint.c (gdbpy_breakpoint_created)
(gdbpy_breakpoint_deleted, gdbpy_breakpoint_modified): Use
gdbpy_ref.
* python/py-bpevent.c (create_breakpoint_event_object): Use
gdbpy_ref.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
In https://sourceware.org/ml/gdb-patches/2016-07/msg00152.html,
Yao noted that a patch of mine was missing a newline.
I thought I had fixed this but when looking today I realized it was
not fixed. This patch adds it.
I'm checking this in as obvious.
2016-07-14 Tom Tromey <tom@tromey.com>
* python/py-breakpoint.c (gdbpy_breakpoint_deleted): Add missing
newline.
This patch adds some breakpoint events to Python. In particular,
there is a creation event that is emitted when a breakpoint is
created; a modification event that is emitted when a breakpoint
changes somehow; and a deletion event that is emitted when a
breakpoint is deleted.
In this patch, the event's payload is the breakpoint itself. I
considered making a new event type to hold the breakpoint, but I
didn't see a need. Still, I thought I would mention this as a spot
where some other choice is possible.
Built and regtested on x86-64 Fedora 23.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/15620, PR python/18620:
* python/py-evts.c (gdbpy_initialize_py_events): Call
add_new_registry for new events.
* python/py-events.h (events_object) <breakpoint_created,
breakpoint_deleted, breakpoint_modified>: New fields.
* python/py-breakpoint.c (gdbpy_breakpoint_created): Emit the
breakpoint changed event.
(gdbpy_breakpoint_deleted): Emit the breakpoint deleted event.
(gdbpy_breakpoint_modified): New function.
(gdbpy_initialize_breakpoints): Attach to the breakpoint modified
observer.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/15620, PR python/18620:
* python.texi (Events In Python): Document new breakpoint events.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/15620, PR python/18620:
* gdb.python/py-breakpoint.exp (connect_event, check_last_event)
(test_bkpt_events): New procs.
This patch adds a "pending" attribute to gdb.Breakpoint.
Built and regtested on x86-64 Fedora 23.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/17698:
* NEWS: Update.
* python/py-breakpoint.c (bppy_get_pending): New function.
(breakpoint_object_getset): Add entry for "pending".
* breakpoint.h (pending_breakpoint_p): Declare.
* breakpoint.c (pending_breakpoint_p): New function.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/17698:
* python.texi (Breakpoints In Python): Document
Breakpoint.pending.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/17698:
* gdb.python/py-breakpoint.exp (test_bkpt_basic): Add "pending"
test.
(test_watchpoints): Likewise.
(test_bkpt_pending): New proc.
I noticed that bppy_get_visibility and gdbpy_breakpoint_created
implemented their own visibility checks, but subtly different from
user_breakpoint_p. I think the latter is more correct, and so changed
the Python code to use it.
I suspect there isn't a decent way to test this, so no new test.
Built and regtested on x86-64 Fedora 23.
2016-07-13 Tom Tromey <tom@tromey.com>
* python/py-breakpoint.c (bppy_get_visibility)
(gdbpy_breakpoint_created): Use user_breakpoint_p.
When a Python script tries to create a breakpoint but fails to do so,
gdb.Breakpoint.__init__ raises an exception and the breakpoint does not
exist anymore in the Python interpreter. However, GDB still keeps a
reference to the Python object to be used for a later hook, which is
wrong.
This commit adds the necessary cleanup code so that there is no stale
reference to this Python object. It also adds a new testcase to
reproduce the bug and check the fix.
2016-06-25 Pierre-Marie de Rodat <derodat@adacore.com>
gdb/
* python/py-breakpoint.c (bppy_init): Clear bppy_pending_object
when there is an error during the breakpoint creation.
gdb/testsuite
* gdb.python/py-breakpoint-create-fail.c,
gdb.python/py-breakpoint-create-fail.exp,
gdb.python/py-breakpoint-create-fail.py: New testcase.
PR python/17981 notes that gdb.breakpoints() returns None when there
are no breakpoints; whereas an empty list or tuple would be more in
keeping with Python and the documentation.
This patch fixes the bug by changing the no-breakpoint return to make
an empty tuple.
Built and regtested on x86-64 Fedora 23.
2016-05-23 Tom Tromey <tom@tromey.com>
PR python/17981:
* python/py-breakpoint.c (gdbpy_breakpoints): Return a new tuple
when there are no breakpoints.
2016-05-23 Tom Tromey <tom@tromey.com>
* python.texi (Basic Python): Document gdb.breakpoints return.
2016-05-23 Tom Tromey <tom@tromey.com>
PR python/17981:
* gdb.python/py-breakpoint.exp (test_bkpt_basic): Add test for
no-breakpoint case.
gdb/ChangeLog:
* python/py-utils.c (host_string_to_python_string): New function.
* python/python-internal.h (host_string_to_python_string): Declare it.
* python/py-*.c (*): Update all calls to
PyString_Decode (str, strlen (str), host_charset (), NULL);
to use host_string_to_python_string instead.
Now that "legacy" linespecs benefit from consolidated support in
string_to_event_location_basic, python's Breakpoint command should use this
function to turn strings into event locations.
As a result, this patch fixes python/19506. Before:
(gdb) python gdb.Breakpoint("*main")
Traceback (most recent call last):
File "<string>", line 1, in <module>
RuntimeError: Function "*main" not defined.
Error while executing Python code.
After:
(gdb) python gdb.Breakpoint("*main")
Breakpoint 1 at 0x4005fb: file ../../../src/gdb/testsuite/gdb.python/py-breakpoint.c, line 32.
gdb/ChangeLog
PR python/19506
* python/py-breakpoint.c (bppy_init): Use
string_to_event_location_basic instead of new_linespec_location.
gdb/testsuite/ChangeLog
PR python/19506
* gdb.python/py-breakpoint.exp (test_bkpt_address): New procedure.
(toplevel): Call test_bkpt_address.
This commit changes GDB to track thread numbers per-inferior. Then,
if you're debugging multiple inferiors, GDB displays
"inferior-num.thread-num" instead of just "thread-num" whenever it
needs to display a thread:
(gdb) info inferiors
Num Description Executable
1 process 6022 /home/pedro/gdb/tests/threads
* 2 process 6037 /home/pedro/gdb/tests/threads
(gdb) info threads
Id Target Id Frame
1.1 Thread 0x7ffff7fc2740 (LWP 6022) "threads" (running)
1.2 Thread 0x7ffff77c0700 (LWP 6028) "threads" (running)
1.3 Thread 0x7ffff7fc2740 (LWP 6032) "threads" (running)
2.1 Thread 0x7ffff7fc1700 (LWP 6037) "threads" (running)
2.2 Thread 0x7ffff77c0700 (LWP 6038) "threads" (running)
* 2.3 Thread 0x7ffff7fc2740 (LWP 6039) "threads" (running)
(gdb)
...
(gdb) thread 1.1
[Switching to thread 1.1 (Thread 0x7ffff7fc2740 (LWP 8155))]
(gdb)
...
etc.
You can still use "thread NUM", in which case GDB infers you're
referring to thread NUM of the current inferior.
The $_thread convenience var and Python's InferiorThread.num attribute
are remapped to the new per-inferior thread number. It's a backward
compatibility break, but since it only matters when debugging multiple
inferiors, I think it's worth doing.
Because MI thread IDs need to be a single integer, we keep giving
threads a global identifier, _in addition_ to the per-inferior number,
and make MI always refer to the global thread IDs. IOW, nothing
changes from a MI frontend's perspective.
Similarly, since Python's Breakpoint.thread and Guile's
breakpoint-thread/set-breakpoint-thread breakpoint methods need to
work with integers, those are adjusted to work with global thread IDs
too. Follow up patches will provide convenient means to access
threads' global IDs.
To avoid potencially confusing users (which also avoids updating much
of the testsuite), if there's only one inferior and its ID is "1",
IOW, the user hasn't done anything multi-process/inferior related,
then the "INF." part of thread IDs is not shown. E.g,.:
(gdb) info inferiors
Num Description Executable
* 1 process 15275 /home/pedro/gdb/tests/threads
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
(gdb) add-inferior
Added inferior 2
(gdb) info threads
Id Target Id Frame
* 1.1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
(gdb)
No regressions on x86_64 Fedora 20.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention that thread IDs are now per inferior and global
thread IDs.
* Makefile.in (SFILES): Add tid-parse.c.
(COMMON_OBS): Add tid-parse.o.
(HFILES_NO_SRCDIR): Add tid-parse.h.
* ada-tasks.c: Adjust to use ptid_to_global_thread_id.
* breakpoint.c (insert_breakpoint_locations)
(remove_threaded_breakpoints, bpstat_check_breakpoint_conditions)
(print_one_breakpoint_location, set_longjmp_breakpoint)
(check_longjmp_breakpoint_for_call_dummy)
(set_momentary_breakpoint): Adjust to use global IDs.
(find_condition_and_thread, watch_command_1): Use parse_thread_id.
(until_break_command, longjmp_bkpt_dtor)
(breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust
to use global IDs.
* dummy-frame.c (pop_dummy_frame_bpt): Adjust to use
ptid_to_global_thread_id.
* elfread.c (elf_gnu_ifunc_resolver_stop): Likewise.
* gdbthread.h (struct thread_info): Rename field 'num' to
'global_num. Add new fields 'per_inf_num' and 'inf'.
(thread_id_to_pid): Rename thread_id_to_pid to
global_thread_id_to_ptid.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(find_thread_id): Rename to ...
(find_thread_global_id): ... this.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare.
(print_thread_info): Add comment.
* tid-parse.h: New file.
* tid-parse.c: New file.
* infcmd.c (step_command_fsm_prepare)
(step_command_fsm_should_stop): Adjust to use the global thread
ID.
(until_next_command, until_next_command)
(finish_command_fsm_should_stop): Adjust to use the global thread
ID.
(attach_post_wait): Adjust to check the inferior number too.
* inferior.h (struct inferior) <highest_thread_num>: New field.
* infrun.c (handle_signal_stop)
(insert_exception_resume_breakpoint)
(insert_exception_resume_from_probe): Adjust to use the global
thread ID.
* record-btrace.c (record_btrace_open): Use global thread IDs.
* remote.c (process_initial_stop_replies): Also consider the
inferior number.
* target.c (target_pre_inferior): Clear the inferior's highest
thread num.
* thread.c (clear_thread_inferior_resources): Adjust to use the
global thread ID.
(new_thread): New inferior parameter. Adjust to use it. Set both
the thread's global ID and the thread's per-inferior ID.
(add_thread_silent): Adjust.
(find_thread_global_id): New.
(find_thread_id): Make static. Adjust to rename.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(thread_id_to_pid): Rename to ...
(global_thread_id_to_ptid): ... this. Adjust.
(first_thread_of_process): Adjust.
(do_captured_list_thread_ids): Adjust to use global thread IDs.
(should_print_thread): New function.
(print_thread_info): Rename to ...
(print_thread_info_1): ... this, and add new show_global_ids
parameter. Handle it. Iterate over inferiors.
(print_thread_info): Reimplement as wrapper around
print_thread_info_1.
(show_inferior_qualified_tids): New function.
(print_thread_id): Use it.
(tp_array_compar): Compare inferior numbers too.
(thread_apply_command): Use tid_range_parser.
(do_captured_thread_select): Use parse_thread_id.
(thread_id_make_value): Adjust.
(_initialize_thread): Adjust "info threads" help string.
* varobj.c (struct varobj_root): Update comment.
(varobj_create): Adjust to use global thread IDs.
(value_of_root_1): Adjust to use global_thread_id_to_ptid.
* windows-tdep.c (display_tib): No longer accept an argument.
* cli/cli-utils.c (get_number_trailer): Make extern.
* cli/cli-utils.h (get_number_trailer): Declare.
(get_number_const): Adjust documentation.
* mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global
thread IDs.
* mi/mi-interp.c (mi_new_thread, mi_thread_exit)
(mi_on_normal_stop, mi_output_running_pid, mi_on_resume):
* mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise.
* guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x):
Likewise.
* python/py-breakpoint.c (bppy_set_thread): Likewise.
* python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
* python/py-infthread.c (thpy_get_num): Add comment and return the
per-inferior thread ID.
(thread_object_getset): Update comment of "num".
gdb/testsuite/ChangeLog:
2016-01-07 Pedro Alves <palves@redhat.com>
* gdb.base/break.exp: Adjust to output changes.
* gdb.base/hbreak2.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/watch_thread_num.exp: Likewise.
* gdb.linespec/keywords.exp: Likewise.
* gdb.multi/info-threads.exp: Likewise.
* gdb.threads/thread-find.exp: Likewise.
* gdb.multi/tids.c: New file.
* gdb.multi/tids.exp: New file.
gdb/doc/ChangeLog:
2016-01-07 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads): Document per-inferior thread IDs,
qualified thread IDs, global thread IDs and thread ID lists.
(Set Watchpoints, Thread-Specific Breakpoints): Adjust to refer to
thread IDs.
(Convenience Vars): Document the $_thread convenience variable.
(Ada Tasks): Adjust to refer to thread IDs.
(GDB/MI Async Records, GDB/MI Thread Commands, GDB/MI Ada Tasking
Commands, GDB/MI Variable Objects): Update to mention global
thread IDs.
* guile.texi (Breakpoints In Guile)
<breakpoint-thread/set-breakpoint-thread breakpoint>: Mention
global thread IDs instead of thread IDs.
* python.texi (Threads In Python): Adjust documentation of
InferiorThread.num.
(Breakpoint.thread): Mention global thread IDs instead of thread
IDs.
This patch converts the code base to use the new struct event_location
API being introduced. This patch preserves the current functionality and
adds no new features.
The "big picture" API usage introduced by this patch may be illustrated
with a simple exmaple. Where previously developers would write:
void
my_command (char *arg, int from_tty)
{
create_breakpoint (..., arg, ...);
...
}
one now uses:
void
my_command (char *arg, int from_tty)
{
struct event_locaiton *location;
struct cleanup *back_to;
location = string_to_event_locaiton (&arg, ...);
back_to = make_cleanup_delete_event_location (location);
create_breakpoint (..., location, ...);
do_cleanups (back_to);
}
Linespec-decoding functions (now called location-decoding) such as
decode_line_full no longer skip argument pointers over processed input.
That functionality has been moved into string_to_event_location as
demonstrated above.
gdb/ChangeLog
* ax-gdb.c: Include location.h.
(agent_command_1) Use linespec location instead of address
string.
* break-catch-throw.c: Include location.h.
(re_set_exception_catchpoint): Use linespec locations instead
of address strings.
* breakpoint.c: Include location.h.
(create_overlay_event_breakpoint, create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint, update_breakpoints_after_exec):
Use linespec location instead of address string.
(print_breakpoint_location): Use locations and
event_location_to_string.
Print extra_string for pending locations for non-MI streams.
(print_one_breakpoint_location): Use locations and
event_location_to_string.
(init_raw_breakpoint_without_location): Initialize b->location.
(create_thread_event_breakpoint): Use linespec location instead of
address string.
(init_breakpoint_sal): Likewise.
Only save extra_string if it is non-NULL and not the empty string.
Use event_location_to_string instead of `addr_string'.
Constify `p' and `endp'.
Use skip_spaces_const/skip_space_const instead of non-const versions.
Copy the location into the breakpoint.
If LOCATION is NULL, save the breakpoint address as a linespec location
instead of an address string.
(create_breakpoint_sal): Change `addr_string' parameter to a struct
event_location. All uses updated.
(create_breakpoints_sal): Likewise for local variable `addr_string'.
(parse_breakpoint_sals): Use locations instead of address strings.
Remove check for empty linespec with conditional.
Refactor.
(decode_static_tracepoint_spec): Make argument const and update
function.
(create_breakpoint): Change `arg' to a struct event_location and
rename.
Remove `copy_arg' and `addr_start'.
If EXTRA_STRING is empty, set it to NULL.
Don't populate `canonical' for pending breakpoints.
Pass `extra_string' to find_condition_and_thread.
Clear `extra_string' if `rest' was NULL.
Do not error with "garbage after location" if setting a dprintf
breakpoint.
Copy the location into the breakpoint instead of an address string.
(break_command_1): Use string_to_event_location and pass this to
create_breakpoint instead of an address string.
Check against `arg_cp' for a probe linespec.
(dprintf_command): Use string_to_event_location and pass this to
create_breakpoint instead of an address string.
Throw an exception if no format string was specified.
(print_recreate_ranged_breakpoint): Use event_location_to_string
instead of address strings.
(break_range_command, until_break_command)
(init_ada_exception_breakpoint): Use locations instead
of address strings.
(say_where): Print out extra_string for pending locations.
(base_breakpoint_dtor): Delete `location' and `location_range_end' of
the breakpoint.
(base_breakpoint_create_sals_from_location): Use struct event_location
instead of address string.
Remove `addr_start' and `copy_arg' parameters.
(base_breakpoint_decode_location): Use struct event_location instead of
address string.
(bkpt_re_set): Use locations instead of address strings.
Use event_location_empty_p to check for unset location.
(bkpt_print_recreate): Use event_location_to_string instead of
an address string.
Print out extra_string for pending locations.
(bkpt_create_sals_from_location, bkpt_decode_location)
(bkpt_probe_create_sals_from_location): Use struct event_location
instead of address string.
(bkpt_probe_decode_location): Use struct event_location instead of
address string.
(tracepoint_print_recreate): Use event_location_to_string to
recreate the tracepoint.
(tracepoint_create_sals_from_location, tracepoint_decode_location)
(tracepoint_probe_create_sals_from_location)
(tracepoint_probe_decode_location): Use struct event_location
instead of address string.
(dprintf_print_recreate): Use event_location_to_string to recreate
the dprintf.
(dprintf_re_set): Remove check for valid/missing format string.
(strace_marker_create_sals_from_location)
(strace_marker_create_breakpoints_sal, strace_marker_decode_location)
(update_static_tracepoint): Use struct event_location instead of
address string.
(location_to_sals): Likewise.
Pass `extra_string' to find_condition_and_thread.
For newly resolved pending breakpoint locations, clear the location's
string representation.
Assert that the breakpoint's condition string is NULL when
condition_not_parsed.
(breakpoint_re_set_default, create_sals_from_location_default)
(decode_location_default, trace_command, ftrace_command)
(strace_command, create_tracepoint_from_upload): Use locations
instead of address strings.
* breakpoint.h (struct breakpoint_ops) <create_sals_from_location>:
Use struct event_location instead of address string.
Update all uses.
<decode_location>: Likewise.
(struct breakpoint) <addr_string>: Change to struct event_location
and rename `location'.
<addr_string_range_end>: Change to struct event_location and rename
`location_range_end'.
(create_breakpoint): Use struct event_location instead of address
string.
* cli/cli-cmds.c: Include location.h.
(edit_command, list_command): Use locations instead of address strings.
* elfread.c: Include location.h.
(elf_gnu_ifunc_resolver_return_stop): Use event_location_to_string.
* guile/scm-breakpoint.c: Include location.h.
(bpscm_print_breakpoint_smob): Use event_location_to_string.
(gdbscm_register_breakpoint): Use locations instead of address
strings.
* linespec.c: Include location.h.
(struct ls_parser) <stream>: Change to const char *.
(PARSER_STREAM): Update.
(lionespec_lexer_lex_keyword): According to find_condition_and_thread,
keywords must be followed by whitespace.
(canonicalize_linespec): Save a linespec location into `canonical'.
Save a canonical linespec into `canonical'.
(parse_linespec): Change `argptr' to const char * and rename `arg'.
All uses updated.
Update function description.
(linespec_parser_new): Initialize `parser'.
Update initialization of parsing stream.
(event_location_to_sals): New function.
(decode_line_full): Change `argptr' to a struct event_location and
rename it `location'.
Use locations instead of address strings.
Call event_location_to_sals instead of parse_linespec.
(decode_line_1): Likewise.
(decode_line_with_current_source, decode_line_with_last_displayed)
Use locations instead of address strings.
(decode_objc): Likewise.
Change `argptr' to const char * and rename `arg'.
(destroy_linespec_result): Delete the linespec result's location
instead of freeing the address string.
* linespec.h (struct linespec_result) <addr_string>: Change to
struct event_location and rename to ...
<location>: ... this.
(decode_line_1, decode_line_full): Change `argptr' to struct
event_location. All callers updated.
* mi/mi-cmd-break.c: Include language.h, location.h, and linespec.h.
(mi_cmd_break_insert_1): Use locations instead of address strings.
Throw an error if there was "garbage" at the end of the specified
linespec.
* probe.c: Include location.h.
(parse_probes): Change `argptr' to struct event_location.
Use event locations instead of address strings.
* probe.h (parse_probes): Change `argptr' to struct event_location.
* python/py-breakpoint.c: Include location.h.
(bppy_get_location): Constify local variable `str'.
Use event_location_to_string.
(bppy_init): Use locations instead of address strings.
* python/py-finishbreakpoint.c: Include location.h.
(bpfinishpy_init): Remove local variable `addr_str'.
Use locations instead of address strings.
* python/python.c: Include location.h.
(gdbpy_decode_line): Use locations instead of address strings.
* remote.c: Include location.h.
(remote_download_tracepoint): Use locations instead of address
strings.
* spu-tdep.c: Include location.h.
(spu_catch_start): Remove local variable `buf'.
Use locations instead of address strings.
* tracepoint.c: Include location.h.
(scope_info): Use locations instead of address strings.
(encode_source_string): Constify parameter `src'.
* tracepoint.h (encode_source_string): Likewise.
gdb/testsuite/ChangeLog
* gdb.base/dprintf-pending.exp: Update dprintf "without format"
test.
Add tests for missing ",FMT" and ",".
All these were caught by actually making TRY/CATCH use try/catch
behind the scenes, which then resulted in the build failing (on x86_64
Fedora 20) because there was code between the try and catch blocks.
gdb/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
* breakpoint.c (save_breakpoints): Adjust to avoid code between
TRY and CATCH.
* gdbtypes.c (safe_parse_type): Remove empty line.
(types_deeply_equal):
* guile/scm-frame.c (gdbscm_frame_name):
* linux-thread-db.c (find_new_threads_once):
* python/py-breakpoint.c (bppy_get_commands):
* record-btrace.c (record_btrace_insert_breakpoint)
(record_btrace_remove_breakpoint, record_btrace_start_replaying)
(record_btrace_start_replaying): Adjust to avoid code between TRY
and CATCH.
This patch splits the TRY_CATCH macro into three, so that we go from
this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ERROR)
{
}
if (ex.reason < 0)
{
}
~~~
to this:
~~~
TRY
{
}
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
~~~
Thus, we'll be getting rid of the local volatile exception object, and
declaring the caught exception in the catch block.
This allows reimplementing TRY/CATCH in terms of C++ exceptions when
building in C++ mode, while still allowing to build GDB in C mode
(using setjmp/longjmp), as a transition step.
TBC, after this patch, is it _not_ valid to have code between the TRY
and the CATCH blocks, like:
TRY
{
}
// some code here.
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
Just like it isn't valid to do that with C++'s native try/catch.
By switching to creating the exception object inside the CATCH block
scope, we can get rid of all the explicitly allocated volatile
exception objects all over the tree, and map the CATCH block more
directly to C++'s catch blocks.
The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was
done with a script, rerun from scratch at every rebase, no manual
editing involved. After the mechanical conversion, a few places
needed manual intervention, to fix preexisting cases where we were
using the exception object outside of the TRY_CATCH block, and cases
where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH
after this patch]. The result was folded into this patch so that GDB
still builds at each incremental step.
END_CATCH is necessary for two reasons:
First, because we name the exception object in the CATCH block, which
requires creating a scope, which in turn must be closed somewhere.
Declaring the exception variable in the initializer field of a for
block, like:
#define CATCH(EXCEPTION, mask) \
for (struct gdb_exception EXCEPTION; \
exceptions_state_mc_catch (&EXCEPTION, MASK); \
EXCEPTION = exception_none)
would avoid needing END_CATCH, but alas, in C mode, we build with C90,
which doesn't allow mixed declarations and code.
Second, because when TRY/CATCH are wired to real C++ try/catch, as
long as we need to handle cleanup chains, even if there's no CATCH
block that wants to catch the exception, we need for stop at every
frame in the unwind chain and run cleanups, then rethrow. That will
be done in END_CATCH.
After we require C++, we'll still need TRY/CATCH/END_CATCH until
cleanups are completely phased out -- TRY/CATCH in C++ mode will
save/restore the current cleanup chain, like in C mode, and END_CATCH
catches otherwise uncaugh exceptions, runs cleanups and rethrows, so
that C++ cleanups and exceptions can coexist.
IMO, this still makes the TRY/CATCH code look a bit more like a
newcomer would expect, so IMO worth it even if we weren't considering
C++.
gdb/ChangeLog.
2015-03-07 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (struct catcher) <exception>: No
longer a pointer to volatile exception. Now an exception value.
<mask>: Delete field.
(exceptions_state_mc_init): Remove all parameters. Adjust.
(exceptions_state_mc): No longer pop the catcher here.
(exceptions_state_mc_catch): New function.
(throw_exception): Adjust.
* common/common-exceptions.h (exceptions_state_mc_init): Remove
all parameters.
(exceptions_state_mc_catch): Declare.
(TRY_CATCH): Rename to ...
(TRY): ... this. Remove EXCEPTION and MASK parameters.
(CATCH, END_CATCH): New.
All callers adjusted.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH
instead.
* configure.ac (libpython checking): Remove all but python.o from
CONFIG_OBS. Remove all but python.c from CONFIG_SRCS.
* configure: Regenerate.
* Makefile.in (SFILES): Add extension.c.
(HFILES_NO_SRCDIR): Add extension.h, extension-priv.h
(COMMON_OBS): Add extension.o.
* extension.h: New file.
* extension-priv.h: New file.
* extension.c: New file.
* python/python-internal.h: #include "extension.h".
(gdbpy_auto_load_enabled): Declare.
(gdbpy_apply_val_pretty_printer): Declare.
(gdbpy_apply_frame_filter): Declare.
(gdbpy_preserve_values): Declare.
(gdbpy_breakpoint_cond_says_stop): Declare.
(gdbpy_breakpoint_has_cond): Declare.
(void source_python_script_for_objfile): Delete.
* python/python.c: #include "extension-priv.h".
Delete inclusion of "observer.h".
(extension_language_python): Moved here and renamed from
script_language_python in py-auto-load.c.
Redefined to be of type extension_language_defn.
(python_extension_script_ops): New global.
(python_extension_ops): New global.
(struct python_env): New member previous_active.
(restore_python_env): Call restore_active_ext_lang.
(ensure_python_env): Call set_active_ext_lang.
(gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static.
New arg extlang.
(gdbpy_set_quit_flag): Renamed from set_quit_flag, made static.
New arg extlang.
(gdbpy_check_quit_flag): Renamed from check_quit_flag, made static.
New arg extlang.
(gdbpy_eval_from_control_command): Renamed from
eval_python_from_control_command, made static. New arg extlang.
(gdbpy_source_script) Renamed from source_python_script, made static.
New arg extlang.
(gdbpy_before_prompt_hook): Renamed from before_prompt_hook. Change
result to int. New arg extlang.
(gdbpy_source_objfile_script): Renamed from
source_python_script_for_objfile, made static. New arg extlang.
(gdbpy_start_type_printers): Renamed from start_type_printers, made
static. New args extlang, extlang_printers. Change result type to
"void".
(gdbpy_apply_type_printers): Renamed from apply_type_printers, made
static. New arg extlang. Rename arg printers to extlang_printers
and change type to ext_lang_type_printers *.
(gdbpy_free_type_printers): Renamed from free_type_printers, made
static. Replace argument arg with extlang, extlang_printers.
(!HAVE_PYTHON, eval_python_from_control_command): Delete.
(!HAVE_PYTHON, source_python_script): Delete.
(!HAVE_PYTHON, gdbpy_should_stop): Delete.
(!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete.
(!HAVE_PYTHON, start_type_printers): Delete.
(!HAVE_PYTHON, apply_type_printers): Delete.
(!HAVE_PYTHON, free_type_printers): Delete.
(_initialize_python): Delete call to observer_attach_before_prompt.
(finalize_python): Set/restore active extension language.
(gdbpy_finish_initialization) Renamed from
finish_python_initialization, made static. New arg extlang.
(gdbpy_initialized): New function.
* python/python.h: #include "extension.h". Delete #include
"value.h", "mi/mi-cmds.h".
(extension_language_python): Declare.
(GDBPY_AUTO_FILE_NAME): Delete.
(enum py_bt_status): Moved to extension.h and renamed to
ext_lang_bt_status.
(enum frame_filter_flags): Moved to extension.h.
(enum py_frame_args): Moved to extension.h and renamed to
ext_lang_frame_args.
(finish_python_initialization): Delete.
(eval_python_from_control_command): Delete.
(source_python_script): Delete.
(apply_val_pretty_printer): Delete.
(apply_frame_filter): Delete.
(preserve_python_values): Delete.
(gdbpy_script_language_defn): Delete.
(gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete.
(start_type_printers, apply_type_printers, free_type_printers): Delete.
* auto-load.c: #include "extension.h".
(GDB_AUTO_FILE_NAME): Delete.
(auto_load_gdb_scripts_enabled): Make public. New arg extlang.
(script_language_gdb): Delete, moved to extension.c and renamed to
extension_language_gdb.
(source_gdb_script_for_objfile): Delete.
(auto_load_pspace_info): New member unsupported_script_warning_printed.
(loaded_script): Change type of language member to
struct extension_language_defn *.
(init_loaded_scripts_info): Initialize
unsupported_script_warning_printed.
(maybe_add_script): Make static. Change type of language arg to
struct extension_language_defn *.
(clear_section_scripts): Reset unsupported_script_warning_printed.
(auto_load_objfile_script_1): Rewrite to use extension language API.
(auto_load_objfile_script): Make public. Remove support-compiled-in
and auto-load-enabled checks, moved to auto_load_scripts_for_objfile.
(source_section_scripts): Rewrite to use extension language API.
(load_auto_scripts_for_objfile): Rewrite to use
auto_load_scripts_for_objfile.
(collect_matching_scripts_data): Change type of language member to
struct extension_language_defn *.
(auto_load_info_scripts): Change type of language arg to
struct extension_language_defn *.
(unsupported_script_warning_print): New function.
(script_not_found_warning_print): Make static.
(_initialize_auto_load): Rewrite construction of scripts-directory
help.
* auto-load.h (struct objfile): Add forward decl.
(struct script_language): Delete.
(struct auto_load_pspace_info): Add forward decl.
(struct extension_language_defn): Add forward decl.
(maybe_add_script): Delete.
(auto_load_objfile_script): Declare.
(script_not_found_warning_print): Delete.
(auto_load_info_scripts): Update prototype.
(auto_load_gdb_scripts_enabled): Declare.
* python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from
auto_load_python_scripts_enabled and made public.
(script_language_python): Delete, moved to python.c.
(gdbpy_script_language_defn): Delete.
(info_auto_load_python_scripts): Update to use
extension_language_python.
* breakpoint.c (condition_command): Replace call to
gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang.
(bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop
with call to breakpoint_ext_lang_cond_says_stop.
* python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed
from gdbpy_should_stop. Change result type to enum scr_bp_stop.
New arg slang. Return SCR_BP_STOP_UNSET if py_bp_object is NULL.
(gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond.
New arg slang.
(local_setattro): Print name of extension language with existing
stop condition.
* valprint.c (val_print, value_print): Update to call
apply_ext_lang_val_pretty_printer.
* cp-valprint.c (cp_print_value): Update call to
apply_ext_lang_val_pretty_printer.
* python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON.
(gdbpy_apply_val_pretty_printer): Renamed from
apply_val_pretty_printer. New arg extlang.
(!HAVE_PYTHON, apply_val_pretty_printer): Delete.
* cli/cli-cmds.c (source_script_from_stream): Rewrite to use
extension language API.
* cli/cli-script.c (execute_control_command): Update to call
eval_ext_lang_from_control_command.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use
enum ext_lang_bt_status values. Update call to
apply_ext_lang_frame_filter.
(mi_cmd_stack_list_locals): Ditto.
(mi_cmd_stack_list_args): Ditto.
(mi_cmd_stack_list_variables): Ditto.
* mi/mi-main.c: Delete #include "python/python-internal.h".
Add #include "extension.h".
(mi_cmd_list_features): Replace reference to python internal variable
gdb_python_initialized with call to ext_lang_initialized_p.
* stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status.
Update to use enum ext_lang_frame_args. Update to call
apply_ext_lang_frame_filter.
* python/py-framefilter.c (extract_sym): Update to use enum
ext_lang_bt_status.
(extract_value, py_print_type, py_print_value): Ditto.
(py_print_single_arg, enumerate_args, enumerate_locals): Ditto.
(py_mi_print_variables, py_print_locals, py_print_args): Ditto.
(py_print_frame): Ditto.
(gdbpy_apply_frame_filter): Renamed from apply_frame_filter.
New arg extlang. Update to use enum ext_lang_bt_status.
* top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to
finish_python_initialization. Replace with call to
finish_ext_lang_initialization.
* typeprint.c (do_free_global_table): Update to call
free_ext_lang_type_printers.
(create_global_typedef_table): Update to call
start_ext_lang_type_printers.
(find_global_typedef): Update to call apply_ext_lang_type_printers.
* typeprint.h (struct ext_lang_type_printers): Add forward decl.
(type_print_options): Change type of global_printers from "void *"
to "struct ext_lang_type_printers *".
* value.c (preserve_values): Update to call preserve_ext_lang_values.
* python/py-value.c: Remove #ifdef HAVE_PYTHON.
(gdbpy_preserve_values): Renamed from preserve_python_values.
New arg extlang.
(!HAVE_PYTHON, preserve_python_values): Delete.
* utils.c (quit_flag): Delete, moved to extension.c.
(clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to
extension.c.
* eval.c: Delete #include "python/python.h".
* main.c: Delete #include "python/python.h".
* defs.h: Update comment.
testsuite/
* gdb.python/py-breakpoint.exp (test_bkpt_eval_funcs): Update expected
output.
* gdb.gdb/python-interrupts.exp: New file.
* breakpoint.h (gdbpy_breakpoint_object): Renamed from
breakpoint_object. All uses updated.
* python/python-internal.h (gdbpy_breakpoint_object): Renamed from
breakpoint_object. All uses updated.
* python.c (*): All uses of breakpoint_object updated.
* python.h (*): All uses of breakpoint_object updated.
* python/py-breakpoint.c (*): All uses of breakpoint_object updated.
* python/py-finishbreakpoint.c (*): Ditto.
* python/py-breakpoint.c (bppy_get_temporary): New function.
(bppy_init): New keyword: temporary. Parse it and set breakpoint
to temporary if True.
2013-11-07 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-breakpoint.exp: Add temporary breakpoint tests.
2013-11-07 Phil Muldoon <pmuldoon@redhat.com>
* gdb.texinfo (Breakpoints In Python): Document temporary
option in breakpoint constructor, and add documentation to the
temporary attribute.
The checker does not understand the idiom
if (except.reason < 0) {
do_cleanups (whatever);
GDB_PY_HANDLE_EXCEPTION (except);
}
because it doesn't realize that the nested 'if' actually has the same
condition.
This fixes instances of this to be more explicit.
* python/py-breakpoint.c (bppy_get_commands): Use
explicit, unconditional return.
* python/py-frame.c (frapy_read_var): Likewise.
* python/python.c (gdbpy_decode_line): Likewise.
One return path in bppy_get_commands was missing a do_cleanups call.
* python/py-breakpoint.c (bppy_get_commands): Call do_cleanups
along all return paths.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
* NEWS: Mention Python 3 support.
* varobj.c (value_get_print_value): Use
python_string_to_target_string.
* python/py-block.c: Use PyVarObject_HEAD_INIT in initialization
of type objects.
* python/py-breakpoint.c: Ditto.
* python/py-cmd.c: Ditto.
* python/py-event.c: Ditto.
* python/py-event.h: Ditto.
* python/py-evtregistry.c: Ditto.
* python/py-finishbreakpoint.c: Ditto.
* python/py-frame.c: Ditto.
* python/py-function.c: Ditto.
* python/py-infthread.c: Ditto.
* python/py-lazy-string.c: Ditto.
* python/py-progspace.c: Ditto.
* /python/py-symbol.c: Ditto.
* python/py-evts.c: (gdbpy_initialize_py_events): Add module
initialization for Python 3.
* python/py-inferior.c: Use PyVarObject_HEAD_INIT in initialization
of type objects.
(infpy_read_memory): Return memoryview object if Python 3.
(infpy_write_memory): Use "s*" operand parsing code for Python 3.
(infpy_search_memory): Ditto.
(get_buffer): New function for Python 3.
* python/py-objfile.c: Use PyVarObject_HEAD_INIT in initialization
of type objects.
(objfpy_dealloc): Use Py_TYPE to call tp_free.
* python/py-param.c: Use PyVarObject_HEAD_INIT in initialization
of type objects.
(get_attr): Use PyUnicode_CompareWithASCIIString if Python 3.
(set_attr): Ditto.
* python/py-prettyprint.c (print_string_repr): use PyBytes methods
instead of PyString methods if Python 3.
(print_children): Skip push_dummy_python_frame call if Python 3.
* python/py-symtab.c: Use PyVarObject_HEAD_INIT in initialization
of type objects.
(salpy_dealloc): Use Py_TYPE to call tp_free.
* python/py-type.c: Use PyVarObject_HEAD_INIT in initialization
of type objects.
(field_dealloc): Use Py_TYPE to call tp_free.
(typy_dealloc): Ditto.
(type_object_as_number): Adjust struct initializations for
differences in layout for Python 2 vs. Python 3.
* python/py-utils.c (python_string_to_unicode): Omit non-Unicode
string case for Python 3.
(unicode_to_encoded_python_string): Shorten code (no functional
change).
(python_string_to_target_python_string): Comment that in Python 3
returned value is a Python "bytes" type.
(gdbpy_is_string): Omit non-Unicode string check in Python 3.
(gdb_py_object_from_longest): Omit non-long integer case in Python
3.
(gdb_py_object_from_ulongest): Ditto.
* python/py-value.c: Use PyVarObject_HEAD_INIT in initialization
of type objects.
(valpy_dealloc): Use Py_TYPE to call tp_free.
(valpy_int): Omit function if Python 3.
(convert_value_from_python): Use "%S" format (Python object as a
string) if Python 3.
(value_object_as_number): Adjust struct initializations for
differences in layout for Python 2 vs. Python 3.
* python/python-config.py: Adjust syntax for Python 3
compatibility.
Include "sys.abiflags" string as part of python library name, if
that attribute exists (Python 3).
* python/python-internal.h (IS_PY3): Define if Python 3.
(Py_TPFLAGS_HAVE_ITER, Py_TPFLAGS_CHECKTYPES): Define with
placeholder value if Python 3.
(PyInt_Check, PyInt_FromLong, PyInt_AsLong, PyString_FromString,
PyString_Decode, PyString_FromFormat, PyString_Check): Define as
analogous Python 3 API function if Python 3.
(PyVarObject_HEAD_INIT): Define if not already defined.
(Py_TYPE): Ditto.
* python/python.c (eval_python_command): Omit Py_FlushLine call if
Python 3.
Check return values of all Python API calls for error.
Supply dummy "python" and "python-interactive" commands if Python
initialization failed.
(_initialize_python): Convert argc to wchar_t** if Python 3.
Add module initialization for Python 3.
(finish_python_initialization): Pass wchar_t * argument to
PySys_SetPath if Python 3.
* python/lib/gdb/__init__.py: Define "reload" if Python 3.
(_GdbFile): New class for common output file behavior.
(GdbOutFile): Subclass from _GdbFile.
(GdbOutputErrorFile): Ditto.
(auto_load_packages): Adjust syntax for Python 3 compatibility.
* python/lib/gdb/printing.py: Define basestr and int if Python 3.
* python/lib/gdb/prompt.py: Use sorted() function rather than
sort() method.
* python/lib/gdb/command/explore.py: Define raw_input if Python 3.
Adjust syntax for Python 3 compatibility.
* python/lib/gdb/command/pretty_printers.py: Use sorted() function
rather than sort() method.
Adjust syntax for Python 3 compatibility.
* python/lib/gdb/command/type_printers.py: Ditto.
* doc/gdb.texinfo (Inferior.read_memory): Mention that the return
value is a memoryview object if Python 3.
* python/py-breakpoint.c: Include python.h.
* python/py-continueevent.c (create_continue_event_object): Make
static.
* python/py-lazy-string.c (stpy_get_type): Make static.
* python/py-newobjfileevent.c (create_new_objfile_event_object):
Make static.
* python/py-utils.c (unicode_to_target_python_string): Make
static.
* python/py-value.c: Include python.h.
* Makefile.in (SUBDIR_PYTHON_OBS): Add py-finishbreakpoint.o.
(SUBDIR_PYTHON_SRCS): Add python/py-finishbreakpoint.c.
Add build rule for this file.
* infcmd.c (print_return_value): Split to create get_return_value.
(get_return_value): New function based on print_return_value. Handle
case where stop_registers are not set.
* inferior.h (get_return_value): New prototype.
* python/py-breakpoint.c (bppy_pending_object): Make non-static.
(gdbpy_breakpoint_created): Set is_py_finish_bp is necessary.
(struct breakpoint_object): Move to python-internal.h
(BPPY_REQUIRE_VALID): Likewise.
(BPPY_SET_REQUIRE_VALID): Likewise.
(gdbpy_breakpoint_created): Initialize is_finish_bp.
(gdbpy_should_stop): Add pre/post hooks before/after calling stop
method.
* python/python-internal.h (breakpoint_object_type): Add as extern.
(bppy_pending_object): Likewise.
(typedef struct breakpoint_object) Removed.
(struct breakpoint_object): Moved from py-breakpoint.c.
Add field is_finish_bp.
(BPPY_REQUIRE_VALID): Moved from py-breakpoint.c.
(BPPY_SET_REQUIRE_VALID): Likewise.
(frame_object_to_frame_info): New prototype.
(gdbpy_initialize_finishbreakpoints): New prototype.
(bpfinishpy_is_finish_bp): Likewise.
(bpfinishpy_pre_stop_hook): Likewise.
(bpfinishpy_post_stop_hook): Likewise.
* python/py-finishbreakpoint.c: New file.
* python/py-frame.c(frame_object_to_frame_info): Make non-static and
accept PyObject instead of frame_object.
(frapy_is_valid): Don't cast to frame_object.
(frapy_name): Likewise.
(frapy_type): Likewise.
(frapy_unwind_stop_reason): Likewise.
(frapy_pc): Likewise.
(frapy_block): Likewise.
(frapy_function): Likewise.
(frapy_older): Likewise.
(frapy_newer): Likewise.
(frapy_find_sal): Likewise.
(frapy_read_var): Likewise.
(frapy_select): Likewise.
* python/python.c (gdbpy_is_stopped_at_finish_bp): New noop function.
(_initialize_python): Add gdbpy_initialize_finishbreakpoints.
* python/python.h: Include breakpoint.h
(gdbpy_is_stopped_at_finish_bp): New prototype.
doc/
* gdb.texinfo (Finish Breakpoints in Python): New subsection.
(Python API): Add menu entry for Finish Breakpoints.
testsuite/
* Makefile.in (EXECUTABLES): Add py-finish-breakpoint and
py-finish-breakpoint2
(MISCALLANEOUS): Add py-events-shlib.so and py-events-shlib-nodebug.so
* gdb.python/py-breakpoint.exp (mult_line): Define and use variable
instead of line number.
* gdb.python/py-finish-breakpoint.c: New file.
* gdb.python/py-finish-breakpoint.exp: New file.
* gdb.python/py-finish-breakpoint.py: New file.
* gdb.python/py-finish-breakpoint2.cc: New file.
* gdb.python/py-finish-breakpoint2.exp: New file.
* gdb.python/py-finish-breakpoint2.py: New file.
Implement most breakpoint_ops methods for all breakpoint types,
and move the default handlings to the proper callbacks.
gdb/
* breakpoint.c (update_watchpoint): Always call the breakpoint's
works_in_software_mode method.
(insert_bp_location): Go through breakpoint_ops->insert_location
for software and hardware watchpoints.
(create_internal_breakpoint): Pass bkpt_breakpoint_ops as
breakpoint_ops.
(remove_breakpoint_1): Go through breakpoint_ops->remove_location
for software and hardware watchpoints.
(print_it_typical): Delete.
(print_bp_stop_message): Always call the breakpoint_ops->print_it
method.
(watchpoint_check): Adjust comment.
(bpstat_check_location): Simply always call the breakpoint's
breakpoint_hit method.
(bpstat_stop_status): Always call the breakpoint's check_status
method. Remove special cases for watchpoints and internal event
breakpoints from here (moved to the check_status implementations).
(print_one_breakpoint_location): Assume b->ops is never NULL.
Remove static tracepoint marker id printing from here (moved to
the print_one_detail callback implementation of tracepoints).
(init_bp_location): Assert OPS is never NULL.
(allocate_bp_location): Always call the breakpoint's
allocate_location method, and remove the default code from here.
(free_bp_location): Always call the location's dtor method, and
remove the default code from here.
(init_raw_breakpoint_without_location): Assert OPS is never NULL.
(set_raw_breakpoint_without_location): Add new breakpoint_ops
parameter. Pass it down.
(set_raw_breakpoint): Ditto.
(print_it_catch_fork): Adjust to take a bpstat as argument.
(catch_fork_breakpoint_ops): Install methods.
(print_it_catch_vfork): Adjust to take a bpstat as argument.
(catch_vfork_breakpoint_ops): Install methods.
(dtor_catch_syscall): Call the base dtor.
(print_it_catch_syscall): Adjust to take a bpstat as argument.
(catch_syscall_breakpoint_ops): Install methods.
(dtor_catch_exec): Call the base dtor.
(print_it_catch_exec): Adjust to take a bpstat as argument.
(catch_exec_breakpoint_ops): Install methods.
(hw_breakpoint_used_count, hw_watchpoint_used_count): Always call
the breakpoint's resources_needed method, and remove the default
code from here.
(set_momentary_breakpoint): Pass bkpt_breakpoint_ops as
breakpoint_ops.
(clone_momentary_breakpoint): Clone the original's ops.
(mention): Always call the breakpoint's print_mention method, and
remove the default code from here.
(create_breakpoint_sal): Adjust to pass the ops to
set_raw_breakpoint rather than setting it manually.
(create_breakpoint): Assert ops is never NULL. Adjust to pass the
ops to set_raw_breakpoint_without_location rather than setting it
manually.
(break_command_1): Pass bkpt_breakpoint_ops as breakpoint_ops.
(print_it_ranged_breakpoint): Adjust to take a bpstat as argument.
(ranged_breakpoint_ops): Install methods.
(break_range_command): Adjust to pass the ops to
set_raw_breakpoint rather than setting it manually.
(re_set_watchpoint, breakpoint_hit_watchpoint)
(check_status_watchpoint, resources_needed_watchpoint)
(works_in_software_mode_watchpoint, print_it_watchpoint)
(print_mention_watchpoint, print_recreate_watchpoint): New
functions.
(watchpoint_breakpoint_ops): Install new methods.
(print_it_masked_watchpoint): New function.
(masked_watchpoint_breakpoint_ops): Install new methods.
(watch_command_1): Adjust to pass the right breakpoint_ops to
set_raw_breakpoint_without_location rather than setting it
manually later. Record the current pspace.
(print_it_exception_catchpoint): Adjust to take a bpstat as
argument.
(gnu_v3_exception_catchpoint_ops): Install new methods.
(say_where): New function.
(null_re_set, null_check_status, null_works_in_software_mode)
(null_resources_needed, null_print_one_detail, bp_location_dtor):
New functions.
(bp_location_ops): New global.
(bkpt_dtor, bkpt_allocate_location, bkpt_re_set)
(bkpt_insert_location, bkpt_remove_location, bkpt_breakpoint_hit)
(bkpt_check_status, bkpt_resources_needed)
(bkpt_works_in_software_mode, bkpt_print_it, bkpt_print_mention)
(bkpt_print_recreate): New functions.
(bkpt_breakpoint_ops): New global.
(tracepoint_re_set, tracepoint_insert_location)
(tracepoint_remove_location, tracepoint_breakpoint_hit)
(tracepoint_check_status, tracepoint_works_in_software_mode)
(tracepoint_print_it, tracepoint_print_one_detail)
(tracepoint_print_mention, tracepoint_print_recreate): New
functions.
(tracepoint_breakpoint_ops): New global.
(delete_breakpoint): Always call the breakpoint's dtor method, and
remove the default handling from here.
(breakpoint_re_set_default): Make static.
(breakpoint_re_set_one): Always call the breakpoints re_set
method, and remove the default handling from here.
(trace_command, ftrace_command, strace_command)
(create_tracepoint_from_upload): Pass appropriate breakpoints_ops
to create_breakpoint.
(save_breakpoints): Always call the breakpoint's print_recreate
method, and remove the default handling from here.
* ada-lang.c (dtor_exception): Call the base dtor.
(re_set_exception): Call the base method.
(print_it_exception, print_it_catch_exception): Adjust to take a
bpstat as argument.
(catch_exception_breakpoint_ops): Install methods.
(print_it_catch_exception_unhandled): Adjust to take a bpstat as
argument.
(catch_exception_unhandled_breakpoint_ops): Install methods.
(print_it_catch_assert): Adjust to take a bpstat as argument.
(catch_assert_breakpoint_ops): Install methods.
* breakpoint.h (struct breakpoint_ops): Adjust the print_it method
to take a bpstat as argument.
(enum print_stop_action): Add describing comments to each enum
value.
(breakpoint_re_set_default): Delete declaration.
(null_re_set, null_works_in_software_mode, null_resources_needed)
(null_check_status, null_print_one_detail): Declare.
(bkpt_breakpoint_ops): Declare.
(bkpt_dtor, bkpt_allocate_location, bkpt_re_set)
(bkpt_insert_location, bkpt_remove_location, bkpt_breakpoint_hit)
(bkpt_check_status, bkpt_resources_needed)
(bkpt_works_in_software_mode, bkpt_print_it)
(null_print_one_detail, bkpt_print_mention, bkpt_print_recreate):
Declare.
* mi/mi-cmd-break.c (mi_cmd_break_insert): Adjust to pass
bkpt_breakpoint_ops.
* python/py-breakpoint.c (bppy_init): Ditto.
Pedro Alves
Tom Tromey
Joel Brobecker
Simon Marchi
Pierre-Marie de Rodat
Doug Evans
Keith Seitz
Gary Benson
Doug Evans
Phil Muldoon
Tom Tromey
Joel Brobecker
Paul Koning
Stan Shebs
Kevin Pouget
Eli Zaretskii