* monitor.c: Turn on caching.
(monitor_printf): If a ^C was sent, don't expect to see its
echo.
(monitor_open): Enable caching.
(monitor_resume, monitor_load): Flush cache.
(monitor_xfer_memory): Call cache routine.
(monitor_dump_regs): New.
(monitor_fetch_registers): If monitor_dump_regs available
then use it.
(monitor_load): Don't ref exec_bfd if it's NULL.
(monitor_load_srec): Use new monitor_make_srec calling convention.
(monitor_make_srec): Rewrite to cope with two, three and four byte
addresses.
* remote-hms.c (hms_cmds): Initialze end-of-command delim.
* dcache.h, dcache.h: Rewritten.
* remote.c: Reenable caching.
(getpkt): Reduce MAX_TRIES to 3.
(remote_xfer_memory): Use dcache_xfer_memory.
* defs.h (error_hook): New.
* top.c (error_hook): New definition.
* utils.c (error): Use error_hook if initialized.
* sparcl-tdep.c (HAVE_SOCKETS): Don't define if GO32 or WIN32. Use
HAVE_SOCKETS in place of #ifndef GO32.
(INSTRUCTION_NULLIFIED): Allow specific targets to override.
* config/pa/tm-hppao.h (INSTRUCTION_NULLIFIED): Define to work
around losing mach kernel behavior.
* (create_file_win create_asm_win build_framework): Create null
bindings for meta keys to keep window from dropping down to
insertion point when meta is pressed by itself. New bindings:
Up/Down - Scroll up/down one line at a time
Next/Prior - Scroll up/down one page at a time
Home/End - Warp to current pc/end of file
* (build_framework): Turn on breakpoint menu.
* (create_command_window): Implement tab completion. Add binding
for ^C to stop target.
Don't assume the first entry on dld's library list is the main
program. Don't load the same library more than once and don't
consider the main program a shared library.
(som_solib_sharedlibrary_command): New function
(_initialize_som_solib): Add "sharedlibrary" command.
mentor-7135
* remote-hms.c (hms_open): Make static.
* mpw-config.in (MacSerial.h): Copy from version in {CIncludes},
not {MPW}Interfaces:CIncludes.
* ser-mac.c (mac_baud_rate_table): Fix value for 38400 baud.
* expression.h (enum exp_opcode): Added UNOP_LOWER, UNOP_UPPER,
UNUP_LENGTH.
* expprint.c (dump_expression): Handle the new exp_opcodes.
(print_subexp): Handle PREC_BUILTIN_FUNCTION.
(print_simple_m2_func): Removed.
(print_subexp): Remove support for Modula2 builtin functions.
* m2-lang.c (m2_op_print_tab): Add support for builtin functions.
* ch-exp.y: Parse LOWER, UPPER, and LENGTH builtins.
(write_lower_upper_value): Convenience function for LOWER and UPPER.
(upper_lower_argument, length_argument): Removed non-terminals.
* ch-lang.c (chill_op_print_tab): Entries for UPPER, LOWER, LENGTH.
(type_lower_upper): New function. Calculate LOWER/UPPER of type.
(value_chill_length): New function. Calcalate LENGTH of ARRAY/STRING.
(evaluate_subexp_chill): Handle UNOP_LOWER, UNOP_UPPER, UNOP_LENGTH.
This fixes PR 5015 (and 5826 which is a duplicate).
* defs.h: Don't declare strchr and friends if WIN32.
(DIRNAME_SEPARATOR): Move here from source.c.
(SLASH_P, SLASH_CHAR, SLASH_STRING, ROOTED_P): New macros,
symbolic definitions for filename bits.
* top.c (cd_command): Use these.
* source.c (mod_path, openp): Ditto.
* terminal.h: Disable termio/sgtty definitions if WIN32.
* findvar.c (registers_changed): Call registers_changed_hook
if it is defined.
for `watchdog' variable. This allows the user to put an upper
limit on the amount of time that GDB will wait for the target to
return from a step or continue operation. This will primarily be
used for the testsuite, where it is difficult to come up with a
reasonable timeout for things like function calls, which can take
as long as three minutes under some circumstances. If the
watchdog timer expires, GDB will generate an error that looks like
`Watchdog has expired.', and will detach from the target.
* remote-mips.c (mips_open): Setup initial frame from target.
Print it out so that user is told where the program is stopped
when they attach.
* remote-nrom.c: Loads of cleanups. Use serial code to open
network connections. Use expect() to wait for response to
download command.
* ser-tcp.c (tcp_open): Retry connection if we get ECONNREFUSED.
* serial.c serial.h (serial_open serial_fdopen serial_close):
Allow users to open the same device multiple times. They all get
to share the same serial_t. This is about the only way to have
multiple active targets use the same device (for download and
debug).
* sparcl-tdep.c: Keep #include <unistd.h> away from GO32.
* target.c: Add `targetdebug' variable. If this is non-zero,
then a special target is put at the top of the target stack which
will cause all calls through the target vector to have their args
and results printed out.
(codestream_fill): Handle byte order differences.
(setup_prologue_scan): Don't read stdarg function's "sub sp,sp,N".
(arc_get_frame_setup): Read it here.
(arc_frame_saved_pc): And here.
(arc_print_insn): New function.
(arc_set_cpu_type): Set arc_bfd_mach_type. Don't set tm_print_insn.
(_initialize_arc_tdep): Set tm_print_insn to arc_print_insn.
cpufile. Awk is not a utility required by the GNU coding
standards. This change also fixes the rigid whitespace
requirements that were required for awk.
stream for i/o with target board.
Use #error if HAVE_TERMIOS is not defined.
* sparclite/{Makefile.in, configure.in}: Converted to use
autoconf.
* sparclite/configure: New file, generated with autoconf 2.3.
hostfile, targetfile and nativefile. Awk is not a utility
required by the GNU coding standards. This change also
fixes the rigid whitespace requirements that were required
for awk.
* configure: regenerated.
target.h.
* target.h: Macros from breakpoint.c. Conditionalize based on
TARGET_HAS_HARDWARE_WATCHPOINTS.
* i386v-nat.c procfs.c: Use TARGET_HAS_HARDWARE_WATCHPOINTS
instead of TARGET_CAN_USE_HARDWARE_WATCHPOINT to enable watchpoint
code.
* config/i386/nm-linux.h, config/mips/nm-irix4.h,
config/pa/nm-hppab.h, config/sparc/tm-sparclite.h: #define
TARGET_HAS_HARDWARE_WATCHPOINTS to enable watchpoint code.
and stop_pc, and STOPPED_BY_WATCHPOINT code, back where they
were--after the switch statement on w.kind. You can't read the
registers of an inferior which has exited. Use a goto in the
STOPPED_BY_WATCHPOINT code.
* infrun.c (wait_for_inferior): Reinstate
HAVE_STEPPABLE_WATCHPOINT and HAVE_CONTINUABLE_WATCHPOINT code.
remote-mips.c, remote-os9k.c, remote-st.c: Conditionalize use of
stdarg rather than varargs on ANSI_PROTOTYPES not __STDC__; it
must match the definition of PARAMS.
start-sanitize-gdbtk
* gdbtk.c: Likewise.
end-sanitize-gdbtk
* xcoffsolib.c (sharedlibrary_command): New command.
* xcoffsolib.c (solib_info): Call xcoff_relocate_symtab.
* xcoffsolib.c: Miscellaneous cleanups.
* partial-stab.h: Ignore symbol descriptor '-' (for local
variables with negative type numbers) without complaint.
* rs6000-nat.c (vmap_ldinfo): Use bfd_stat rather than our own
local emulation thereof. Remove unused variable ostart.
error message to work with pre-ansi compilers.
(monitor_load_srec): reduced length of s-records from 128 to 32
bytes so download is more reliable with the rom68k monitor.
* rom68k-rom.c: Added trailing space to prompt string.
* config/i386/xm-i386sco.h (HAVE_STRSTR): Removed.
* config/i386/xm-go32.h, mswin/xm.h (SYS_SIGLIST_MISSING):
Removed.
* defs.h, config/{xm-lynx.h, xm-nbsd.h},
config/i386/{xm-i386bsd.h, xm-linux.h},
config/m68k/xm-hp300bsd.h, config/mips/xm-irix4.h,
config/ns32k/xm-ns32km3.h, doc/gdbint.texinfo
(PSIGNAL_IN_SIGNAL_H): Removed.
symbols, their value is the displacement from the procedure address.
* top.c (init_main): Add missing newlines to help strings for
`if' and `while' commands, fix help string for `show commands'.
target.h. Use BP_TEMPFLAG and BP_HARDWAREFLAG instead of
constants.
* infrun.c (wait_for_inferior): Enhance comment near
STOPPED_BY_WATCHPOINT.
* target.h: Macros from breakpoint.c.
config/m68k/m68kv4.mh, config/mips/{irix4.mh, irix5.mh,
mipsv4.mh}, config/sparc/sun4so2.mh (INSTALL): Removed, figured
out by autoconf.
* config/apollo68v.mh (RANLIB): Removed, figured out by autoconf.
* Makefile.in, configure.in: Converted to use autoconf
* aclocal.m4: New file, local autoconf macro definitions.
* configure: New file, generated with autoconf 2.3.
into a variable (__WINSIZE) so that it can be controlled via the
.h file.
* sparclite/sparclite.h: Add SL933 #ifdef to set __WINSIZE to 6
for the 933 board.
trap_expected_after_continue.
* (wait_for_inferior): Fix for remote watchpoints. Don't try to
insert breakpoints while target is running (this only works on
*some* native targets). This may also speed up native watchpoints
considerably.
* symfile.c, symfile.h (init_psymbol_list): New function;
consolidate duplicated copies from os9kread.c, dbxread.c
and dwarfread.c.
* defs.h: Declare info_verbose.
* xcoffread.c: Extensive changes to support psymtabs.
Jeff Law
Steve Chamberlain
Stan Shebs
Stu Grossman
Per Bothner
J.T. Conklin
Michael Meissner
David Edelsohn
Angela Marie Thomas
Jim Kingdon
Peter Schauer