perhaps we can later remove the the_bfd field from each symbol.
* syms.c (struct symbol_cache_entry): Remove unused field
app_data. Add comment noting that the_bfd is almost redundant,
but not quite.
* aoutx.h, coff-a29k.c, coff-i386.c, coff-i960.c, coffcode.h:
Use new macros bfd_asymbol_bfd and bfd_asymbol_flavour.
* hppa.c (fill_spaces): Make slightly more rebust.
* configure.in: Allow std-host as the "default" host.
* Patches from Minh Tran-le <mtranle@paris.intellicorp.com>.
* configure.in (i386-*-isc*, i386-*-aix*): New targets.
* configure.host (i386-*-isc*, i386-*-aix*): New hosts.
* hosts/i386isc.h, config/i386isc.mh: New files for Interactive
Unix.
* hosts/i386aix.h, config/i386aix.mh: New files for AIX on PS/2.
* aix386-core.c: New file for handling core files on AIX on PS/2.
* targets.c: if AIX386_CORE, use aix386_core_vec.
* coffcode.h (coff_real_object_p): check for I386SVMAGIC as well
as I386MAGIC.
to host support file names for bfd, binutils, opcodes.
* configure.in: Use it.
* i386aout.c: Cleanup, dump TARGET_IS_LITTLE_ENDIAN_P.
* i386bsd.c: Cleanup, reformat.
* config/i386-bsd.mt: Comment changes.
* config/i386bsd.mh: New file for core file support.
* hosts/i386bsd.h: Merge changes from Peter Schauer.
* bout.c (ALIGN): Rename to ALIGNER, since system header files
on BSD 4.4 define ALIGN (sigh!).
* aoutx.h (some_aout_object_p): Restore old aout_data value if this type
doesn't match. Don't lose if file sections have already been created.
(set_arch_mach): Set reloc_entry_size.
(slurp_symbol_table): Use bfd_h_get_{16,8} for reaeding symbol data.
* hosts/i386bsd.h: New file.
* configure.in: Recognize i[34]86-*-bsd host.
* aout-target.h (callback, write_object_contents): Delete unused variables.
* aoutx.h (reloc_type_lookup): New function.
* aout-target.h (MY_reloc_howto_type_lookup): Use it as default.
* aoutf1.h (sunos4_reloc_type_lookup): Deleted.
(MY_reloc_howto_type_lookup): Don't define it.
* aoutx.h (adjust_sizes_and_vmas): Don't bother with padding for OMAGIC files.
(slurp_symbol_table): Use header byte order, not target byte order, for reading
symbol data.
* aout-adobe.c: New file. So far, only reads a.out.adobe. FIXME.
* config/adobe.mt: Add.
* configure.in (*-adobe-* target): Add.
* targets.c (a_out_adobe_vec): Add.
* Makefile.in: add aout-adobe.c.
* configure.in: Put two dashes in all entries to be matched.
Add comments to remind people to do this.
Reorder all entries that match manufacturer names, to occur
last, so they will only be matched if no more specific match
occurs. Remove manufacturers `aout', `bout', `coff', and `elf'.
Tue Aug 18 12:57:45 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in: added FLAGS_TO_PASS, and used it for all recursive
invocations of make. Also, always create installation
directories.
* config/apollov68.mh: removed -g from CC definition.
* configure.in: Rewrite target parsing to use simple format.
Handle sparc-sun-solaris2 configuration.
* aout64.h: Avoid ANSI C brain death warning.
* elf.c: Avoid trigraph (???) or /* in comments.
* configure.in: now h8 is a coff target
* cpu-h8300.c: fix various disassembly problems
* libcoff.h: took out some code which has been #0ed for a long
time.
* targets.c: added h8 coff
* coff-a29k.c, coff-i386.c, coff-i960.c, coff-m68k.c, coff-m88k.c
added new macro RTYPE2HOWTO to take a load of #ifdefs out of
coffcode.h
* coffcode.h: Started to change the way machine dependencies are
handled, from the nest of #ifdefs to macros defined in the
including coff-<foo>.c
* include/sys/h-*.h: Move to bfd/hosts/h-*.h.
* configure.in: Revise to symlink sysdep.h to hosts/h-xxx.h.
Change some config names to match other dirs.
* *.c: Include bfd.h before sysdep.h, so ansidecl and PROTO()
get defined first.
* Makefile.in: Use -I. to get sysdep.h.
* trad-core.c: Don't disable the whole file if SUN4_SYS.
* config/: Rename some config files to match up h-*.h names.
Remove all the HOST_SYS definitions from the config files.
* hosts/h-amix.h, h-i386v.h: Define POSIX_UTIME, not USG.
* hosts/h-hp9000.h: Remove USG comment.
* hosts/h-rs6000.h: Include <stdlib.h> for malloc.
* hosts/h-news.h, h-sparc-64.h: New config files that had
previously been kludged in the <sysdep.h> file.
* cpu-a29k.c, cpu-i386.c, cpu-m68k.c, cpu-mips.c, cpu-vax.c,
cpu-h8300.c, cpu-i960.c, cpu-m88k.c, cpu-sparc.c: added. These
files will eventually contain processor specific bits for bfd,
like strange relocation information and dis/assembly. So far only
the H8 has been even partially done. This work also ties in with
the change in handling architectures.
* aout-f1.h: (choose_reloc_size) now calls bfd_get_arch to
discover the architecture of the bfd. (sunos4_callback) calls the
function bfd_set_arch_mach rather than stuffing stuff directly
into the bfd. (sunos4_write_object_contents), changed names of
accessor functions.
* aoutx.h: (set_arch_mach) now calls bfd_default_set_arch_mach to
setup the environment.
* archive.c: (bfd_slurp_coff_armap) coff archives always have the
headers in big endian format, regardless of the endianess of the
host or target.
* archures.c: totally changed. Now an architecture is represented
with a pointer to an info structure rather than an enumerated type
and a long. The old info is available as two elements in the
structure. Future enhancements to architecure support will
involve pointers to methods being placed into the info structure.
* bfd.c: changed the definition of the bfd structure for the new
architecture stuff.
* bout.c: (b_out_set_arch_mach) changed to use the new
architecture mechanism.
* coffcode.h: (coff_set_arch_mach, coff_set_flags) changed to use
the new architecture mechanism.
* configure.in: added h8 stuff.
* ieee.c: too many changes to note. Now ieee files written with
bfd gas and ld can be read by gld and ieee only linkers and
simulators.
* libbfd.c, libbfd.h: changed prototype of bfd_write.
* newsos3.c: (newos3_callback) now calls bfd_set_arch_mach rather
than fixing the structure directly.
* oasys.c: (oasys_object_p) now calls bfd_default_set_arch_mach rather
than fixing the structure directly.
* opncls.c: (new_bfd) makes sure that bfd_init has been called
before opening a bfd.
* srec.c: (srec_set_arch_mach) now calls bfd_default_set_arch_mach
rather than fixing the structure directly.
* targets.c: (target_vector) now by defining SELECT_VECS (perhaps
in the t/hmake file) a user can select which backends they want
linked with bfd without changing the source.
* init.c: new, looks after initializing modules.
* howto.c: for future use, will allow an application to work out
what cookie to use as a handle on a relcoatio howto.
Ken Raeburn
Per Bothner
Ian Lance Taylor
John Gilmore
Mark Eichin
Michael Tiemann
Fred Fish
Stu Grossman
David D. Zuhn
Sean Eric Fagan
Steve Chamberlain
Steve Chamberlain
K. Richard Pixley