These targets use the ELF format according to `bfd/config.bfd'.
binutils/
* testsuite/lib/binutils-common.exp (is_elf_format): Also return
1 for `*-*-lynxos*' and `*-*-symbianelf*' targets.
Fixes these fails:
nds32le-linux +FAIL: binutils-all/strip-14
nds32le-linux +FAIL: binutils-all/strip-15
pru-elf +FAIL: binutils-all/strip-14
pru-elf +FAIL: binutils-all/strip-15
strip-13 fails on nds32 due to an assertion failure and out of bounds
access to nds32_elf_howto_table.
* testsuite/binutils-all/objcopy.exp (strip-14, strip-15): Choose
reloc=11 for pru and reloc=50 for nds32.
* testsuite/binutils-all/strip-15.d: Accept 0xb reloc number.
Verify that `strip' completes successfully and a correct relocation
entry is copied for a relocation encountered with the STN_UNDEF symbol
index.
binutils/
* testsuite/binutils-all/strip-15.d: New test.
* testsuite/binutils-all/strip-15rel.s: New test source.
* testsuite/binutils-all/strip-15rela.s: New test source.
* testsuite/binutils-all/strip-15mips64.s: New test source.
* testsuite/binutils-all/objcopy.exp: Run the new test.
Verify that `strip' terminates gracefully and a correct error message is
produced for a relocation encountered with an invalid symbol index. No
single relocation number is valid across all targets we support, so pick
a few numbers to choose from depending on the target.
binutils/
* testsuite/binutils-all/strip-14.d: New test.
* testsuite/binutils-all/strip-14rel.s: New test source.
* testsuite/binutils-all/strip-14rela.s: New test source.
* testsuite/binutils-all/strip-14mips64.s: New test source.
* testsuite/binutils-all/objcopy.exp: Run the new test.
I happened to notice that objdump was not printing "Rust" when showing
the DW_AT_language for a CU:
<10> DW_AT_language : 28 (Unknown: 1c)
This patch adds all the new language constants from DWARF 5 to
binutils/dwarf.c.
2018-04-06 Tom Tromey <tom@tromey.com>
* dwarf.c (read_and_display_attr_value): Add missing DW_LANG
constants from DWARF 5.
config/plugins.m4 has
if test "$plugins" = "yes"; then
AC_SEARCH_LIBS([dlopen], [dl])
fi
Plugin uses dlsym, but libasan.so only intercepts dlopen, not dlsym:
[hjl@gnu-tools-1 binutils-text]$ nm -D /lib64/libasan.so.4| grep " dl"
0000000000038580 W dlclose
U dl_iterate_phdr
000000000004dc50 W dlopen
U dlsym
U dlvsym
[hjl@gnu-tools-1 binutils-text]$
Testing dlopen for libdl leads to false negative when -fsanitize=address
is used. It results in link failure:
../bfd/.libs/libbfd.a(plugin.o): undefined reference to symbol 'dlsym@@GLIBC_2.16'
dlsym should be used to check if libdl is needed for plugin.
bfd/
PR gas/22318
* configure: Regenerated.
binutils/
PR gas/22318
* configure: Regenerated.
gas/
PR gas/22318
* configure: Regenerated.
gprof/
PR gas/22318
* configure: Regenerated.
ld/
PR gas/22318
* configure: Regenerated.
Fix a typo: `.dc.w' -> `.dc.l' in `strip-13mips64.s', correcting a bug
from commit 2f8ceb3899 ("binutils/testsuite: Support REL and MIPS64
reloc formats with `strip-13'"). For relocation format correctness only
as there is no observable change in test results due to the lack of
connection between the second relocation entry affected and the examined
error message produced.
binutils/
* testsuite/binutils-all/strip-13mips64.s: Use `.dc.l' rather
than `.dc.w' in second relocation.
Avoid false positives and actually verify both that an `unsupported
relocation type 0x8f' message is produced and that no other message is,
except for the final `bad value', in the `strip-13' test. This ensures
that it is a relocation processing error and not a different issue that
has caused `strip' to terminate unsuccessfully, and that the number
representing the unsupported relocation has not been clobbered.
binutils/
* testsuite/binutils-all/strip-13.d: Also expect `unsupported
relocation type 0x8f' error message.
Add source variants for the `strip-13' test that produce relocations in
the REL and MIPS64 formats, fixing a failure for the `mips64el-openbsd'
target. This also corrects output for `i*86-*', `i960-*', `m6812-*' and
`m68hc12-*', o32 `mips*-*', and `score*-*' targets, which however does
not show up as a test result change due to lax error message matching
causing `bad value' previously produced by `strip' as a result of input
file rejection to be accepted as a test pass.
For `m6811-*' aka `m68hc11-*' targets this causes a phantom regression,
because they use 16-bit addressing and therefore `.dc.a' emits 16-bit
quantities causing relocation data constructed in assembly not to be as
expected. Previously input was rejected by `strip' with a `bad value'
message and now it is accepted, however due to the relocation data error
the relocation number is not one of the unsupported ones and the tool
completes successfully, which scores as a test failure.
Disable the test case for `m6811-*' and `m68hc11-*' targets then, as it
is a test case bug rather than a problem with the relevant backend. A
separate change to the test case is required to correct this problem, at
which point the test case can be enabled for the affected targets.
binutils/
* testsuite/binutils-all/strip-13.s: Rename to...
* testsuite/binutils-all/strip-13rela.s: ... this.
* testsuite/binutils-all/strip-13rel.s: New test source.
* testsuite/binutils-all/strip-13mips64.s: New test source.
* testsuite/binutils-all/strip-13.d: Remove `arm-*', `d10v-*',
`dlx-*' and `xgate-*' from `not-target' list. Add `m6811-*' and
`m68hc11-*' to `not-target' list.
* testsuite/binutils-all/objcopy.exp: Switch between sources for
`strip-13'.
Based on relocations defined in include/elf/*.h files we have relocation
numbers: 143, 159, 214 and 215 currently not used by any of our ELF
targets. Use 143 then instead of 241 to enable the `strip-13' test for
`hppa*-*' targets. It has a side effect with some targets of verifying
that unused relocations whose numbers are below the respective R_*_max
value are handled correctly.
binutils/
* testsuite/binutils-all/strip-13.s: Use 143 (0x8f) rather than
241 (0xf1) for the relocation number and RELA addend.
* testsuite/binutils-all/strip-13.d: Remove `hppa*-*' from the
`not-target' list.
* readelf.c (get_symbol_for_build_attribute): Skip ARM mapping
symbols.
(print_gnu_build_attribute_description): If no file start symbol
could be found, look for one two bytes into the file.
* testsuite/binutils-all/note-4-64.s: Set the address of the file
start symbol to two bytes into the file.
* testsuite/binutils-all/note-4-32.s: Likewise.
The following bits in DT_FLAGS_1 are used by Solaris:
#define DF_1_KMOD 0x10000000 /* kernel module */
#define DF_1_WEAKFILTER 0x20000000 /* apply weak binding to DT_FILTER */
#define DF_1_NOCOMMON 0x40000000 /* no COMMON symbols exist */
binutils/
* readelf.c (process_dynamic_section): Also dump DF_1_KMOD,
DF_1_WEAKFILTER and DF_1_NOCOMMON.
include/
* elf/common.h (DF_1_KMOD): New.
(DF_1_WEAKFILTER): Likewise.
(DF_1_NOCOMMON): Likewise.
PR 22955
* stabs.c (parse_number): Add p_end parameter and use it to check
the validity of the pp parameter. Add checks to prevent walking
off the end of the string buffer.
(parse_stab_string): Likewise.
(parse_stab_type): Likewise.
(parse_stab_type_number): Likewise.
(parse_stab_range_type): Likewise.
(parse_stab_sun_builtin_type): Likewise.
(parse_stab_sun_floating_type): Likewise.
(parse_stab_enum_type): Likewise.
(parse_stab_struct_type): Likewise.
(parse_stab_baseclasses): Likewise.
(parse_stab_struct_fields): Likewise.
(parse_stab_cpp_abbrev): Likewise.
(parse_stab_one_struct_field): Likewise.
(parse_stab_members): Likewise.
(parse_stab_tilde_field): Likewise.
(parse_stab_array_type): Likewise.
* parse_stab: Compute the end of the string and then pass it on to
individual parser functions.
xcoff (32-bit) objdump accepted but ignored -M options unless
-mpowerpc was also given. This patch fixes that, leaving the default
as -Mpwr for xcoff. I've also enabled more tests for xcoff targets.
binutils/
* configure.ac: Add objdump_private_desc_xcoff for rs6000.
* configure: Regenerate.
gas/
* testsuite/gas/ppc/aix.exp: Run for rs6000 too.
* testsuite/gas/ppc/ppc.exp: Run more tests for non-ELF targets.
* testsuite/gas/ppc/machine.d: Don't run for PE targets.
opcodes/
* disassemble.c (disassembler): Use bfd_arch_powerpc entry for
bfd_arch_rs6000.
* disassemble.h (print_insn_rs6000): Delete.
* ppc-dis.c (powerpc_init_dialect): Handle rs6000.
(disassemble_init_powerpc): Call powerpc_init_dialect for rs6000.
(print_insn_rs6000): Delete.
Replace linear search with binary search on dynamic relocations. After
finding a match, scan backward to the first matching relocation, then
scan forward for a matching relocation with non-absolute symbol.
On Fedora 27 x86-64, time for "objdump -d" on libxul.so from RHEL 7.4
x86-64 went from
134.46user 0.12system 2:15.03elapsed
to
8.49user 0.14system 0:08.64elapsed
PR binutils/22911
* objdump.c (is_significant_symbol_name): Return TRUE for all
.plt* sections.
(find_symbol_for_address): Replace linear search with binary
search on dynamic relocations.
This fixes the case where all of a group is removed with ld -r, the
situation in the PR, and failures where part of a group is removed
that contain relocs.
bfd/
PR 22836
* elf.c (_bfd_elf_fixup_group_sections): Account for removed
relocation sections. If size reduces to just the flag word,
remove that too and mark with SEC_EXCLUDE.
* elflink.c (bfd_elf_final_link): Strip empty group sections.
binutils/
* testsuite/binutils-all/group-7.s,
* testsuite/binutils-all/group-7a.d,
* testsuite/binutils-all/group-7b.d,
* testsuite/binutils-all/group-7c.d: New tests.
* testsuite/binutils-all/objcopy.exp: Run them.
ld/
* testsuite/ld-elf/pr22836-2.d,
* testsuite/ld-elf/pr22836-2.s: New test.
PR 22793
* readelf.c (find_section): Replace assertion with test and return
of NULL.
(find_section_by_address): Add test of section header table
existance.
(find_section_by_type): Likewise.
(find_section_in_set): Likewise.
Report an error when an unsupported `.reginfo' section size is found in
`_bfd_mips_elf_section_processing', removing an assertion that triggers
at elfxx-mips.c:7105 in GAS when assembling input like:
.section .reginfo
.word 0xdeadbeef
and in `objcopy --rename-section' when renaming an incorrectly sized
section to `.reginfo'.
bfd/
* elfxx-mips.c (_bfd_mips_elf_section_processing): For
SHT_MIPS_REGINFO sections don't assert the correct size and
report an error instead.
binutils/
* testsuite/binutils-all/mips/mips-reginfo.d: New test.
* testsuite/binutils-all/mips/mips-reginfo-n32.d: New test.
* testsuite/binutils-all/mips/mips-reginfo.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
gas/
* testsuite/gas/mips/reginfo-2.d: New test.
* testsuite/gas/mips/reginfo-2-n32.d: New test.
* testsuite/gas/mips/reginfo-2.l: New test stderr output.
* testsuite/gas/mips/reginfo-2.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Add support for the `error', `error_output', `warning' and
`warning_output' options for `run_dump_test' input files, based on the
version of the procedure in ld/testsuite/lib/ld-lib.exp and providing
compatible semantics. These options apply to PROG under test and let
test cases specify output expected on stderr as well as express a
requirement for PROG to exit unsuccessfully. Messages to match against
can be supplied either inline or fetched from a named file. Update
procedure description in the introductory comment accordingly.
As the exit status from `remote_exec' is regrettably lost in our default
implementation of `binutils_run', which is user-overridable, avoid
changing this procedure's API and use a global `binutils_run_status'
variable to pass the status up to the caller, similarly to how
`binutils_run_failed' is handled. Document the new variable in the
respective introductory comments.
binutils/
* testsuite/config/default.exp (binutils_run): Document
`binutils_run_status'.
* testsuite/lib/utils-lib.exp (default_binutils_run): Likewise,
and set it.
(run_dump_test): Add `error', `error_output', `warning' and
`warning_output' options. Update documentation accordingly.
Adds a register name table for RiscV so that objdump and readelf can
both use better register names.
binutils/ChangeLog:
* dwarf.c (dwarf_regnames_riscv): New register name table.
(init_dwarf_regnames_riscv): New function.
(init_dwarf_regnames): Add call to initialise RiscV register
names.
* dwarf.h (init_dwarf_regnames_riscv): Declare.
* objdump.c (dump_dwarf): Add call to initialise RiscV register
names.
PR 22734
* doc/binutils.texi (nm): Update description to point out that
zero-initialized values can also be shown as type B, b, S or s
since they can be stored in the BSS section.
Following my recent transition from Imagination Technologies to the
reincarnated MIPS company update MAINTAINERS entries accordingly.
binutils/
* MAINTAINERS: Update my company e-mail address.
gdb/
* MAINTAINERS: Update my company e-mail address.
sim/
* MAINTAINERS: Update my company e-mail address.
. * config-ml.in: Sync with gcc sources.
* config.guess: Likewise.
* config.sub: Likewise.
* configure.ac: Likewise.
* configure: Regenerate.
config * Sync with GCC sources:
2017-11-14 Boris Kolpackov <boris@codesynthesis.com>
* gcc-plugin.m4: Add support for MinGW.
2017-11-17 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
* cet.m4: New file.
2017-11-15 Alexandre Oliva <aoliva@redhat.com>
* bootstrap-debug-lean.mk (do-compare): Use the
contrib/compare-debug script.
2017-10-24 H.J. Lu <hongjiu.lu@intel.com>
* bootstrap-cet.mk: New file.
2017-06-19 Martin Liska <mliska@suse.cz>
* bootstrap-lto-noplugin.mk: Enable -flto in all PGO stages.
* bootstrap-lto.mk: Likewise.
2017-06-03 Eric Botcazou <ebotcazou@adacore.com>
* mt-android: New file.
2017-02-13 Richard Biener <rguenther@suse.de>
* isl.m4: Remove support for ISL 0.14.
2017-01-19 Uros Bizjak <ubizjak@gmail.com>
PR target/78478
* ax_check_define.m4: New file.
2017-01-17 Jakub Jelinek <jakub@redhat.com>
PR other/79046
* acx.m4 (GCC_BASE_VER): New m4 function.
(ACX_TOOL_DIRS): Require GCC_BASE_VER, for
--with-gcc-major-version-only use just major number from BASE-VER.
2017-01-06 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
PR go/78978
* hwcaps.m4 (GCC_CHECK_ASSEMBLER_HWCAP): New macro.
I am checking in the attached patch which updates the binutils
support for version 3 binary annotation notes. (Version 3 adds
an end address to the ranges covered by the notes, so that it
is possible to detect gaps in the coverage).
This patch also stops the note merging feature of objcopy from
executing if the notes have relocations against them. This makes the
code simpler, and prevents the problems with architectures which have
unusual relocation management issues.
* objcopy.c (objcopy_internal_note): New structure.
(gap_exists): New function.
(is_open_note): New function.
(is_func_note): New function.
(is_64bit): New function.
(merge_gnu_build_notes): Handle v3 notes. Do not merge
if there are relocations against the notes.
* readelf.c (get_note_type): Use short names for build attribute
notes.
(print_symbol_for_build_attribute): Rename to
get_symbol_for_build_attribute. Returns the found symbol rather
than printing it.
(print_gnu_build_attribute_description): Maintain address ranges
for function notes as well as global notes. Handle v3 notes.
(print_gnu_build_attribute_name): Use more space for printing the
name in wide mode.
* testsuite/binutils-all/note-2-32.s: Use .dc.l instead of .word.
Eliminate symbol references in order to remove the need for
relocations.
* testsuite/binutils-all/note-2-64.s: Likewise.
* testsuite/binutils-all/note-3-32.s: Add a size to the note_1
symbol.
* testsuite/binutils-all/note-3-64.s: Likewise.
* testsuite/binutils-all/mips/mips-note-2r-n32.d: Update expected
output.
* testsuite/binutils-all/mips/mips-note-2r-n64.d: Likewise.
* testsuite/binutils-all/mips/mips-note-2r.d: Likewise.
* testsuite/binutils-all/note-2-32.d: Likewise.
* testsuite/binutils-all/note-2-64.d: Likewise.
* testsuite/binutils-all/note-3-32.d: Likewise.
* testsuite/binutils-all/note-3-64.d: Likewise.
* testsuite/binutils-all/note-4-64.s: New test. Checks v3 notes.
* testsuite/binutils-all/note-4-32.s: New test.
* testsuite/binutils-all/note-4-64.d: New test result file.
* testsuite/binutils-all/note-4-32.d: New test result file.
PR 22587
* readelf.c (process_section_headers): Do not complain about an
sh_info field of 0 in relocation sections of ET_EXEC or ET_DYN
type executables.
This is a followup to "binutils nm testsuite tidy". Since the perror
in binutils_assemble has been removed, we need to take more care in
failure paths.
The patch also fixed a number of .exp files that have multiple tests,
where an assembly failure returns from the .exp file. In most cases
it is nicer to attempt all tests.
* testsuite/binutils-all/ar.exp (unique_symbol): Don't run AR
if assembly fails.
* testsuite/binutils-all/arc/objdump.exp (check_assembly): If
objfile is empty, fail test.
* testsuite/binutils-all/arm/objdump.exp: Don't return if assembly
fails for a test, continue on to other tests.
* testsuite/binutils-all/bfin/objdump.exp: Likewise.
* testsuite/binutils-all/hppa/objdump.exp: Likewise.
* testsuite/binutils-all/m68k/objdump.exp: Likewise.
* testsuite/binutils-all/vax/objdump.exp: Likewise.
* testsuite/binutils-all/size.exp: Likewise.
* testsuite/binutils-all/nm.exp: Likewise. Move PR12753 test.
* testsuite/binutils-all/objcopy.exp: Don't perror on assembly fail.
* testsuite/binutils-all/objdump.exp: Report assembly fails.
PR 22532
* dwarf.c (read_and_display_attr_value): Add attributes that might
use the DW_FORM_exprloc form, and if so, display the decoded
location expression list.
We can run the gnu_unique_object symbol test on all ELF targets.
Those that don't support the symbol type and fail to assemble can just
be resolved as "unsupported". This means binutils_assemble can't
report an error on assembly failure, but it probably should never have
done that anyway.
* testsuite/lib/utils-lib.exp (default_binutils_assemble_flags):
Don't perror on assembler diagnostic output.
* testsuite/binutils-all/nm.exp: Run unique symbol test on all
ELF targets. Resolve as "unsupported" on assembly failure.
When checking mapping symbols backwardly, the section which defines the symbol
is not considerted. This patch fixes this by moving the section checking code
into get_sym_code_type () function which is shared by forward and backword
mapping symbol searching.
opcodes/
2017-12-11 Petr Pavlu <petr.pavlu@arm.com>
Renlin Li <renlin.li@arm.com>
* aarch64-dis.c (print_insn_aarch64): Move symbol section check ...
(get_sym_code_type): Here.
binutils/
2017-12-11 Renlin Li <renlin.li@arm.com>
* testsuite/binutils-all/aarch64/objdump.d: New.
* testsuite/binutils-all/aarch64/objdump.s: New.
A recent Fedora bug (1520805) exposed a problem with objcopy's reloc
copying code, when a binary also contains mergeable notes. The note
merging code would delete some relocs, but then the reloc copying code
would try to put them back again, which did not work.
So I am checking in the patch below to fix the problem. The patch
also tweaks one of the binutils note merging tests so that it is
skipped for the Sparc64 target, since this has funky relocs.
binutils * objcopy.c (copy_relocations_in_section): Use the orelocations
field of the input section, if it has been initialised.
* testsuite/binutils-all/note-2-64.d: Skip test on Sparc64.
bfd * elfcode.h (elf_write_relocs): Check for an empty howto field.
PR 22465
binutils/
* objcopy.c (copy_section): New local extra. If isection->lma not
exactly divisible by interleave, then bias from. Also adjust
osection->lma if necessary.
ld/
* testsuite/ld-elf/interleave-0.d, testsuite/ld-elf/interleave-4.d,
* testsuite/ld-elf/interleave.ld, testsuite/ld-elf/interleave.s: New.
PR 22552
* readelf.c (process_file_header): Don't assume XINDEX case
value for e_shstrndx is within bounds.
(load_debug_section): Sanity test e_shstrndx before attempting
to read .shstrtab. Wrap long lines.
PR 22508
* objdump.c (dump_relocs_in_section): Also check the section's
relocation count to make sure that it is reasonable before
attempting to allocate space for the relocs.
bfd/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
binutils/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
gas/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
gold/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
gprof/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
ld/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
opcodes/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
When dumping notes, get note alignment from either note section or note
segment. To support notes generated by assemblers with
https://sourceware.org/bugzilla/show_bug.cgi?id=22492
we treate alignment as 4 bytes if it is less than 4. Otherwise, we skip
notes if alignment isn't 4 nor 8 bytes.
We should call load_separate_debug_file only if e_shstrndx != SHN_UNDEF.
PR binutils/22490
* readelf.c (process_notes_at): Add an argument for note
alignment. If note alignment is less than 4, use 4 byte
alignment. Otherwise, skip notes if alignment isn't 4 nor
8 bytes.
(process_corefile_note_segments): Pass segment alignment to
process_notes_at.
(process_note_sections): Pass section alignment to
process_notes_at.
(process_object): Call load_separate_debug_file only if
e_shstrndx != SHN_UNDEF.
PR 22490
* readelf.c (dump_section_as_bytes): Check for a NULL string
section pointer.
(process_notes_at): Compute the alignment to use if displaying
notes from a segment.
This fixed the build with GCC 4.2:
cc1: warnings being treated as errors
binutils-gdb/binutils/dwarf.c: In function ‘load_separate_debug_info’:
binutils-gdb/binutils/dwarf.c:9650: warning: declaration of ‘link’ shadows a global declaration
/usr/include/unistd.h:757: warning: shadowed declaration is here
* dwarf.c (load_separate_debug_info): Rename argument name from
link to xlink.
CORE PT_NOTE segments may have p_align values of 0 or 1. gABI specifies
that PT_NOTE alignment should be aligned to 4 bytes for 32-bit objects
and to 8 bytes for 64-bit objects. If segment alignment is less than 4,
we use 4 byte alignment.
This reverts commit 650444eb54.
With this patch, running the GDB test case gdb.base/auxv.exp is stuck in
an infinite loop, consuming memory to the point that it renders the
machine unusable. I am reverting it so we can take our time to
investigate while not killing all the developers' machines.
According to gABI, in a note entry, the note name field, not note name
size, is padded for the note descriptor. And the note descriptor field,
not note descriptor size, is padded for the next note entry. Also notes
are aligned to 4 bytes in 32-bit objects and 8 bytes in 64-bit objects.
Since on Linux, .note.ABI-tag and .note.gnu.build-id notes are always
aligned to 4 bytes, we need to use alignment of note section or note
segment, instead of assuming alignment based on ELF file class.
Tested on i686 and x86-64.
bfd/
PR binutils/22444
* elf.c (elf_read_notes): Add an argument for note aligment.
(elf_parse_notes): Likewise.
(_bfd_elf_make_section_from_shdr): Pass section aligment to
elf_parse_notes.
(bfd_section_from_phdr): Pass segment aligment to elf_read_notes.
(elf_parse_notes): Add an argument for note aligment. Use
ELF_NOTE_DESC_OFFSET to get the offset of the note descriptor.
Use ELF_NOTE_NEXT_OFFSET to get the offset of the next note
entry.
(elf_read_notes): Add an argument for note aligment and pass it
to elf_parse_notes.
binutils/
PR binutils/22444
* readelf.c (process_notes_at): Use ELF_NOTE_DESC_OFFSET to get
the offset of the note descriptor. Use ELF_NOTE_NEXT_OFFSET to
get the offset of the next note entry.
include/
PR binutils/22444
* elf/external.h (ELF_ALIGN_UP): New.
(ELF_NOTE_DESC_OFFSET): Likewise.
(ELF_NOTE_NEXT_OFFSET): Likewise.
Check in the object file generated from the older assembler as a
compressed file.
PR binutils/22451
* testsuite/binutils-all/x86-64/objects.exp: New file.
* testsuite/binutils-all/x86-64/pr22451.o.bz2: Likewise.
* dwarf.c (dwo_name, dwo_dir, dwo_id, dwo_id_len): New variables.
(read_and_display_attr_value): Record dwo variables if requested.
(display_augmentation_data): Rename to display_data and make
generic.
(load_dwo_file): New function. Loads a separate dwarf object
file.
(load_separate_debug_file): Add reporting and loading of separate
dwarf objet files.
* readelf.c (process_section_headers): Add do_debug_links to list
of flags requiring a debug dump.
(display_debug_section): Tidy up code.
* doc/debug.options.texi: Add note that dwo links will also be
followed.
* testsuite/binutils-all/debuglink.s: Tidy code.
* testsuite/binutils-all/dwo.s: New test file.
* testsuite/binutils-all/readelf.wk2: New file - expected output
from readelf.
* testsuite/binutils-all/readelf.exp: Run the new test.
Symbols like *ABS* defined in bfd/section.c:global_syms are not
elf_symbol_type. They can appear on relocs and perhaps other places
in an ELF bfd, so a number of places in nm.c and objdump.c are wrong
to cast an asymbol based on the bfd being ELF. I think we lose
nothing by excluding all section symbols, not just the global_syms.
PR 22443
* nm.c (sort_symbols_by_size): Don't attempt to access
section symbol internal_elf_sym.
(print_symbol): Likewise. Don't call bfd_get_symbol_version_string
for section symbols.
* objdump.c (compare_symbols): Don't attempt to access
section symbol internal_elf_sym.
(objdump_print_symname): Don't call bfd_get_symbol_version_string
for section symbols.
binutils/
* readelf.c (elf/riscv.h): Alphabetize include.
(is_32bit_inplace_add_reloc, is_32bit_inplace_sub_reloc)
(is_64bit_inplace_add_reloc, is_64bit_inplace_sub_reloc)
(is_16bit_inplace_add_reloc, is_16bit_inplace_sub_reloc)
(is_8bit_inplace_add_reloc, is_8bit_inplace_sub_reloc): New.
(apply_relocations): New locals reloc_inplace and reloc_subtract.
Call the new functions and set the new locals. Call byte_get if
reloc_inplace. Subtract sym->st_value if reloc_subtract.
--
This patch causes problems for glibc linknamespace tests because of how it
changes the output format of readelf on .a files.
Previously, "readelf -W -s libc.a" would produce output starting e.g.:
File: /scratch/jmyers/glibc/many8/build/glibcs/x86_64-linux-gnu/glibc/libc.a(init-first.o)
Symbol table '.symtab' contains 30 entries:
and continuing with symbol information for each object in that .a file.
After this commit, instead it starts:
File: /scratch/jmyers/glibc/many8/build/glibcs/x86_64-linux-gnu/glibc/libc.a
Symbol table '.symtab' contains 30 entries:
and every object's symbol information starts with the same File: line,
missing any information about which object's symbols (within libc.a) are
being listed.
I think the previous File: lines that said libc.a(init-first.o) etc.,
identifying the particular object within libc.a, were clearly preferable,
and the glibc linknamespace tests rely on having that information about
the individual object within libc.a.
--
binutils * readelf.c (process_archive): Include member name in the
file_name of the filedata structure.
Hi Guys,
I am applying the rather large patch attached to this email to enhance
the readelf and objdump programs so that they now have the ability to
follow links to separate debug info files. (As requested by PR
15152). So for example whereas before we had this output:
$ readelf -wi main.exe
Contents of the .debug_info section:
[...]
<15> DW_AT_comp_dir : (alt indirect string, offset: 0x30c)
[...]
With the new option enabled we get:
$ readelf -wiK main.exe
main.exe: Found separate debug info file: dwz.debug
Contents of the .debug_info section (loaded from main.exe):
[...]
<15> DW_AT_comp_dir : (alt indirect string, offset: 0x30c) /home/nickc/Downloads/dwzm
[...]
The link following feature also means that we can get two lots of
output if the same section exists in both the main file and the
separate debug info file:
$ readelf -wiK main.exe
main.exe: Found separate debug info file: dwz.debug
Contents of the .debug_info section (loaded from main.exe):
[...]
Contents of the .debug_info section (loaded from dwz.debug):
[...]
The patch also adds the ability to display the contents of debuglink
sections:
$ readelf -wk main.exe
Contents of the .gnu_debugaltlink section:
Separate debug info file: dwz.debug
Build-ID (0x14 bytes):
c4 a8 89 8d 64 cf 70 8a 35 68 21 f2 ed 24 45 3e 18 7a 7a 93
Naturally there are long versions of these options (=follow-links and
=links). The documentation has been updated as well, and since both
readelf and objdump use the same set of debug display options, I have
moved the text into a separate file. There are also a couple of new
binutils tests to exercise the new behaviour.
There are a couple of missing features in the current patch however,
although I do intend to address them in follow up submissions:
Firstly the code does not check the build-id inside separate debug
info files when it is searching for a file specified by a
.gnu_debugaltlink section. It just assumes that if the file is there,
then it contains the information being sought.
Secondly I have not checked the DWARF-5 version of these link
features, so there will probably be code to add there.
Thirdly I have only implemented link following for the
DW_FORM_GNU_strp_alt format. Other alternate formats (eg
DW_FORM_GNU_ref_alt) have yet to be implemented.
Lastly, whilst implementing this feature I found it necessary to move
some of the global variables used by readelf (eg section_headers) into
a structure that can be passed around. I have moved all of the global
variables that were necessary to get the patch working, but I need to
complete the operation and move the remaining, file-specific variables
(eg dynamic_strings).
Cheers
Nick
binutils PR 15152
* dwarf.h (enum dwarf_section_display_enum): Add gnu_debuglink,
gnu_debugaltlink and separate_debug_str.
(struct dwarf_section): Add filename field.
Add prototypes for load_separate_debug_file, close_debug_file and
open_debug_file.
* dwarf.c (do_debug_links): New.
(do_follow_links): New.
(separate_debug_file, separate_debug_filename): New.
(fetch_alt_indirect_string): New function. Retrieves a string
from the debug string table in the separate debug info file.
(read_and_display_attr_value): Use it with DW_FORM_GNU_strp_alt.
(load_debug_section_with_follow): New function. Like
load_debug_section, but if the first attempt fails, then tries
again in the separate debug info file.
(introduce): New function.
(process_debug_info): Use load_debug_section_with_follow and
introduce.
(load_debug_info): Likewise.
(display_debug_lines_raw): Likewise.
(display_debug_lines_decoded): Likewise.
(display_debug_macinfo): Likewise.
(display_debug_macro): Likewise.
(display_debug_abbrev): Likewise.
(display_debug_loc): Likewise.
(display_debug_str): Likewise.
(display_debug_aranges): Likewise.
(display_debug_addr); Likewise.
(display_debug_frames): Likewise.
(display_gdb_index): Likewise.
(process_cu_tu_index): Likewise.
(load_cu_tu_indexes): Likewise.
(display_debug_links): New function. Displays the contents of a
.gnu_debuglink or .gnu_debugaltlink section.
(calc_gnu_debuglink_ctc32):New function. Calculates a CRC32
value.
(check_gnu_debuglink): New function. Checks the CRC of a
potential separate debug info file.
(parse_gnu_debuglink): New function. Reads a CRC value out of a
.gnu_debuglink section.
(check_gnu_debugaltlink): New function.
(parse_gnu_debugaltlink): New function. Reads the build-id value
out of a .gnu_debugaltlink section.
(load_separate_debug_info): New function. Finds and loads a
separate debug info file.
(load_separate_debug_file): New function. Attempts to find and
follow a link to a separate debug info file.
(free_debug_memory): Free the separate debug info file
information.
(opts_table): Add "follow-links" and "links".
(dwarf_select_sections_by_letters): Add "k" and "K".
(debug_displays): Reformat. Add .gnu-debuglink and
.gnu_debugaltlink.
Add an extra entry for .debug_str in a separate debug info file.
* doc/binutils.texi: Move description of debug dump features
common to both readelf and objdump into...
* objdump.c (usage): Add -Wk and -WK.
(load_specific_debug_section): Initialise the filename field in
the dwarf_section structure.
(close_debug_file): New function.
(open_debug_file): New function.
(dump_dwarf): Load and dump the separate debug info sections.
* readelf.c (struct filedata): New structure. Contains various
variables that used to be global:
(current_file_size, string_table, string_table_length, elf_header)
(section_headers, program_headers, dump_sects, num_dump_sects):
Move into filedata structure.
(cmdline): New global variable. Contains list of sections to dump
by number, as specified on the command line.
Add filedata parameter to most functions.
(load_debug_section): Load the string table if it has not already
been retrieved.
(close_file): New function.
(close_debug_file): New function.
(open_file): New function.
(open_debug_file): New function.
(process_object): Process sections in any separate debug info files.
* doc/debug.options.texi: New file. Add description of =links and
=follow-links options.
* NEWS: Mention the new feature.
* elfcomm.c: Have the byte gte functions take a const pointer.
* elfcomm.h: Update prototypes.
* testsuite/binutils-all/dw5.W: Update expected output.
* testsuite/binutils-all/objdump.WL: Update expected output.
* testsuite/binutils-all/objdump.exp: Add test of -WK and -Wk.
* testsuite/binutils-all/readelf.exp: Add test of -wK and -wk.
* testsuite/binutils-all/readelf.k: New file.
* testsuite/binutils-all/objdump.Wk: New file.
* testsuite/binutils-all/objdump.WK2: New file.
* testsuite/binutils-all/linkdebug.s: New file.
* testsuite/binutils-all/debuglink.s: New file.
gas * testsuite/gas/avr/large-debug-line-table.d: Update expected
output.
* testsuite/gas/elf/dwarf2-11.d: Likewise.
* testsuite/gas/elf/dwarf2-12.d: Likewise.
* testsuite/gas/elf/dwarf2-13.d: Likewise.
* testsuite/gas/elf/dwarf2-14.d: Likewise.
* testsuite/gas/elf/dwarf2-15.d: Likewise.
* testsuite/gas/elf/dwarf2-16.d: Likewise.
* testsuite/gas/elf/dwarf2-17.d: Likewise.
* testsuite/gas/elf/dwarf2-18.d: Likewise.
* testsuite/gas/elf/dwarf2-5.d: Likewise.
* testsuite/gas/elf/dwarf2-6.d: Likewise.
* testsuite/gas/elf/dwarf2-7.d: Likewise.
ld * testsuite/ld-avr/gc-section-debugline.d: Update expected
output.
Jim has recently started working at SiFive, where he'll be contributing
to our binutils port. Andrew and I would like him to be a maintainer.
My understanding is that this is right place to ask.
I've also changed my address to my SiFive one, where I also work -- it
seems cleaner to have everyone use our proper email address. While I
was in there, I noticed a trailing space after Andrew's name so I went
ahead and removed it as well.
binutils/ChangeLog
2017-11-07 Palmer Dabbelt <palmer@sifive.com>
* MAINTAINERS (RISC-V): Add Jim Wilson as a maintainer.
Clean up Andrew's entry (remove trailing space, add tabs).
Change Palmer's email address, and clean up entry (add tabs).
binutils has lacked proper pluralization of output messages for a long
time, for example, readelf will display information about a section
that "contains 1 entries" or "There are 1 section headers". Fixing
this properly requires us to use ngettext, because other languages
have different rules to English.
This patch defines macros for ngettext and friends to handle builds
with --disable-nls, and tidies the existing nls support. I've
redefined gettext rather than just defining "_" as dgettext in bfd and
opcodes in case someone wants to use gettext there (which might
conceivably happen with generated code).
bfd/
* sysdep.h: Formatting, comment fixes.
(gettext, ngettext): Redefine when ENABLE_NLS.
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
(_): Define using gettext.
(textdomain, bindtextdomain): Use safer "do nothing".
* hosts/alphavms.h (textdomain, bindtextdomain): Likewise.
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
opcodes/
* opintl.h: Formatting, comment fixes.
(gettext, ngettext): Redefine when ENABLE_NLS.
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
(_): Define using gettext.
(textdomain, bindtextdomain): Use safer "do nothing".
binutils/
* sysdep.h (textdomain, bindtextdomain): Use safer "do nothing".
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
gas/
* asintl.h (textdomain, bindtextdomain): Use safer "do nothing".
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
gold/
* system.h (textdomain, bindtextdomain): Use safer "do nothing".
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
ld/
* ld.h (textdomain, bindtextdomain): Use safer "do nothing".
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
Force printing of the short/signed values using hexadecimal
representation via disassembler option.
opcode/
2017-11-03 Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (print_hex): New variable.
(parse_option): Check for hex option.
(print_insn_arc): Use hexadecimal representation for short
immediate values when requested.
(print_arc_disassembler_options): Add hex option to the list.
binutils/
2017-11-03 Claudiu Zissulescu <claziss@synopsys.com>
* doc/binutils.texi (ARC): Update disassembler options.
* testsuite/binutils-all/arc/hexprint.s: New file.
* testsuite/binutils-all/arc/objdump.exp: Test hex printing feature.
PR 22386
* dwarf.c (read_cie): Use bfd_size_type for
augmentation_data_len.
(display_augmentation_data): New function.
(display_debug_frames): Use it.
Check for integer overflow when testing augmentation_data_len.
PR 22369
* coffgen.c (_bfd_coff_free_symbols): Fail if called on a non-COFF
file.
* cofflink.c (coff_link_check_archive_element): Skip non-COFF
members of an archive.
* readelf.c (process_relocs): Tell users if no static relocs were
found, but if they had added --use-dynamic to the command line
then relocs would have been displayed.
PR 22361
* readelf.c (process_archive_index_and_symbols): Ensure ar_size
field is zero terminated for strtoul.
(setup_archive, get_archive_member_name): Likewise.
Alan Modra
Maciej W. Rozycki
Tom Tromey
H.J. Lu
John David Anglin
Nick Clifton
Paul Pluzhnikov
Ronald Hoogenboom
Matthias Klose
Andrew Burgess
Joel Brobecker
Renlin Li
Jim Wilson
Oleksandr Pikozh
Stefan Stroe
Simon Marchi
Pavel I. Kryukov
claziss
Palmer Dabbelt
Mingi Cho
James Bowman