structure. This way NUM_REGS does not have to be a constant.
* monitor.c (monitor_fetch_register): Added support for regname
function. The function is called if the array regnames is NULL.
(monitor_store_register): Same.
* cpu32bug-rom.c (cpu32bug_regname): Add function. Replaces regnames array.
(init_cpu32bug_cmds): set cpu32bug_cmds.regnames to NULL,
cpu32bug_cmds.regname to point to new function.
* abug-rom.c (abug_regname): Same as above.
(init_abug_cmds): Same.
* dbug-rom.c (dbug_regname): Same as above.
(init_dbug_cmds): Same.
* remote-est.c (est_regname): Same.
(init_est_cmds): Same.
* rom68k-rom.c (rom68k_regname): Same.
(init_rom68k_cmds): Same.
* rom68k-rom.c: #include "value.h".
(is_hex_digit, hex_digit_value, is_whitespace,
rom68k_supply_one_register): New static functions.
(rom68k_supply_register): Call rom68k_supply_one_register, instead
of monitor_supply_register; the latter was incorrectly parsing
the values.
* Makefile.in (rom68k-rom.o): Note that this now #includes value.h.
error message to work with pre-ansi compilers.
(monitor_load_srec): reduced length of s-records from 128 to 32
bytes so download is more reliable with the rom68k monitor.
* rom68k-rom.c: Added trailing space to prompt string.
* config/i386/xm-i386sco.h (HAVE_STRSTR): Removed.
* config/i386/xm-go32.h, mswin/xm.h (SYS_SIGLIST_MISSING):
Removed.
* defs.h, config/{xm-lynx.h, xm-nbsd.h},
config/i386/{xm-i386bsd.h, xm-linux.h},
config/m68k/xm-hp300bsd.h, config/mips/xm-irix4.h,
config/ns32k/xm-ns32km3.h, doc/gdbint.texinfo
(PSIGNAL_IN_SIGNAL_H): Removed.
unnecessary remoteloadprotocol and remoteloadtype support.
* (expect expect_prompt): Change names to monitor_expect and
monitor_expect_prompt. Make them global.
* (printf_monitor): Change name to monitor_printf. Make global.
* (monitor_read_memory): Flush command echo to avoid parsing
ambiguity with CPU32Bug monitor.
* (monitor_load): Remove remoteloadprotocol and remoteloadtype
support. Call target_ops->load_routine, default to
monitor_load_srec.
* (monitor_load_srec): Remove everything but S-record support.
* monitor.h (monitor_ops): Add load_routine to provide monitor
specific download capability.
* remote-est.c: Clean up copyrights and comments.
* w89k-rom.c: Use new xmodem support.
* xmodem.c xmodem.h: New files to support xmodem downloads.
* rom68k-rom.c remote-est.c: Fix copyrights, add load_routine
entry to monitor_ops.
* cpu32bug-rom.c: New file to support Moto BCC debuggers.
* config/m68k/est.mt (TDEPFILES): Add cpu32bug.o.
* config/pa/hppapro.mt (TDEPFILES): Add xmodem.o.
send_xmodem_packet shows up to do the obvious. Lots of fixes to
xmodem downloads including resetting of block number at start of
new transfers, fix for buffer overrun problem, addition of CRC
generation code.
* (monitor_open): loadtype_str and loadproto_str now default to
first entry in monitor_ops->loadtypes.
* (monitor_wait): Lengthen register dump buf, because of verbose
Winbond monitor.
* (monitor_fetch_register): Report unimplemented registers as 0.
* (monitor_read_memory): Only do 16 byte aligned transfers
because of formatting weirdness with the Winbond monitor. Also,
ignore non-hex, non-whitespace formatting between bytes (same
monitor).
* (monitor_load): Clean up logic.
* (monitor_load_srec): Re-do xmodem support. Move lots of it
into send_xmodem_packet.
* (getacknak): Get rid of polls and timeouts. Handle CRC
requests from receiver.
* (monitor_make_srec): Efficiency improvements. Don't call
sprintf to output two digit hex numbers.
* (crcinit, docrc): New, CRC-16 support routines.
* (send_xmodem_packet): New routine to generate either CRC-16 or
checksummed xmodem packets.
* remote-est.c (est_loadtypes), rom68k-rom.c (rom68k_loadtypes):
Reduce tables down to only the load types supported by each
monitor.
* w89k-rom.c (w89k_supply_register): Parses output of Winbond
register dumps.
* (w89k_loadtypes, w89k_loadprotos): Reduce to just srec/xmodem.
* (w89k_cmds): Add clear all breakpoints, memory fill, and dump
registers commands.
* Makefile.in (gdbtk.o): Use X11_CFLAGS to provide alternate
locations (per-host) for X11 include files.
* config/pa/hppahpux.mh (XM_CLIBS): Add -L/usr/lib/X11R5 to force
the use of R5 libs. (X11_CFLAGS): Add this to indicate the locs
of the R5 include files.
end-sanitize-gdbtk
* monitor.c monitor.h remote-est.c rom68k-rom.c: Add start of
support for interrupting target.
* monitor.c (monitor_open): Send stop command before doing
anything else.
* (monitor_load_srec): Fix record size calculation to prevent end
of segment from getting trashed.
* rom68k-rom.c: Update to latest version of struct monitor_ops.
* config/sparc/tm-sparc.h (FIX_CALL_DUMMY): Fix byte-order
problems. Makes DOS hosted function calling work.
* sparclite/crt0.s: Define _start to make COFF happy.
* testsuite/config/rom68k.exp (gdb_target_rom68k): Use
$targetname, $serialport and $baud instead of hardwired variables.
* testsuite/gdb.base/{sigall.exp signals.exp}: Skip these if the
target doesn't support signals.
these routines much smarter about updating registers from the
target, only doing so when absolutely necessary. This really
speeds up register modification on some remote targets.
* monitor.c: More cleanups. Get rid of monitor_load_ascii_srec.
BFD makes this unnecessary. Lots of debugging speedups.
* (expect): NULL terminate return string.
* (monitor_open monitor_supply_register parse_register_dump
monitor_wait monitor_fetch_register): Switch to using GNU regexp
library to parse multi-register displays.
* (monitor_read_memory): Read multiple bytes (up to 16) at once.
* (monitor_create_inferior): Call clear_proceed_status to make run
command notice first breakpoint.
* (monitor_load): Clean up. Reset inferior_pid, set pc to start
address and reset symbol table stuff to make loads put things into
a fresh state.
* (monitor_load_srec): Lower sleep time to 1 second.
* monitor.h (struct monitor_ops): Add register_pattern and
supply_register to monitor_ops.
* rom68k-rom.c: Add new support for handling register dumps.
Sun make (with VPATH) work...
* monitor.c monitor.h rom68k-rom.c: Serious cleanup to make IDP
(rom68k) target work right.
* array-rom.c op50-rom.c w89k-rom.c: Partial updates to new
monitor.c interface. More work needs to be done here.
* config/m68k/tm-monitor.h: Change DECR_PC_AFTER_BREAK to 0 to
match the IDP monitor. Also, set NUM_REGS to 18 cuz there's no
floating-point for this card.
to monitor config structure for supported baud rates for a target
and variable stop bits.
* monitor.c (monitor_fetch_register): Store register values in big
endian format on any host.
Andrew Cagney