Commit Graph

40 Commits

Author SHA1 Message Date
Joel Brobecker 32d0add0a6 Update year range in copyright notice of all files owned by the GDB project.
gdb/ChangeLog:

        Update year range in copyright notice of all files.
2015-01-01 13:32:14 +04:00
Maciej W. Rozycki 0d5ed15352 Avoid software breakpoint's instruction shadow inconsistency
This change:

commit b775012e84
Author: Luis Machado <luisgpm@br.ibm.com>
Date:   Fri Feb 24 15:10:59 2012 +0000

    2012-02-24  Luis Machado  <lgustavo@codesourcery.com>

	* remote.c (remote_supports_cond_breakpoints): New forward
	declaration.
[...]

changed the way breakpoints are inserted and removed such that
`insert_bp_location' can now be called with the breakpoint being handled
already in place, while previously the call was only ever made for
breakpoints that have not been put in place.  This in turn caused an
issue for software breakpoints and targets for which a breakpoint's
`placed_address' may not be the same as the original requested address.

The issue is `insert_bp_location' overwrites the previously adjusted
value in `placed_address' with the original address, that is only
replaced back with the correct adjusted address later on when
`gdbarch_breakpoint_from_pc' is called.  Meanwhile there's a window
where the value in `placed_address' does not correspond to data stored
in `shadow_contents', leading to incorrect instruction bytes being
supplied when `one_breakpoint_xfer_memory' is called to supply the
instruction overlaid by the breakpoint.

And this is exactly what happens on the MIPS target with software
breakpoints placed in microMIPS code.  In this case not only
`placed_address' is not the original address because of the ISA bit, but
`mips_breakpoint_from_pc' has to read the original instruction to
determine which one of the two software breakpoint instruction encodings
to choose as well.  The 16-bit encoding is used to replace 16-bit
instructions and similarly the 32-bit one is used with 32-bit
instructions, to satisfy branch delay slot size requirements.

The mismatch between `placed_address' and the address data in
`shadow_contents' has been obtained from leads to the wrong encoding
being used in some cases, which in the case of a 32-bit software
breakpoint instruction replacing a 16-bit instruction causes corruption
to the adjacent following instruction and leads the debug session astray
if execution reaches there e.g. with a jump.

To address this problem I made the change below, that adds a
`reqstd_address' field to `struct bp_target_info' and leaves
`placed_address' unchanged once it has been set.  This ensures data in
`shadow_contents' is always consistent with `placed_address'.

This approach also has this good side effect that all the places that
examine the breakpoint's address see a consistent value, either
`reqstd_address' or `placed_address', as required.  Currently some
places see either the original or the adjusted address in
`placed_address', depending on whether they have been called before
`gdbarch_remote_breakpoint_from_pc' or afterwards.  This is in
particular true for subsequent calls to
`gdbarch_remote_breakpoint_from_pc' itself, e.g. from
`one_breakpoint_xfer_memory'.  This is also important for places like
`find_single_step_breakpoint' where a breakpoint's address is compared
to the raw value of $pc.

	* breakpoint.h (bp_target_info): Add `reqstd_address' member,
	update comments.
	* breakpoint.c (one_breakpoint_xfer_memory): Use `reqstd_address'
	for the breakpoint's address.  Don't preinitialize `placed_size'.
	(insert_bp_location): Set `reqstd_address' rather than
	`placed_address'.
	(bp_target_info_copy_insertion_state): Also copy `placed_address'.
	(bkpt_insert_location): Use `reqstd_address' for the breakpoint's
	address.
	(bkpt_remove_location): Likewise.
	(deprecated_insert_raw_breakpoint): Likewise.
	(deprecated_remove_raw_breakpoint): Likewise.
	(find_single_step_breakpoint): Likewise.
	* mem-break.c (default_memory_insert_breakpoint): Use
	`reqstd_address' for the breakpoint's address.  Don't set
	`placed_address' or `placed_size' if breakpoint contents couldn't
	have been determined.
	* remote.c (remote_insert_breakpoint): Use `reqstd_address' for
	the breakpoint's address.
	(remote_insert_hw_breakpoint): Likewise.  Don't set
	`placed_address' or `placed_size' if breakpoint couldn't have been
	set.
	* aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Use
	`reqstd_address' for the breakpoint's address.
	* arm-linux-nat.c (arm_linux_hw_breakpoint_initialize): Likewise.
	* ia64-tdep.c (ia64_memory_insert_breakpoint): Likewise.
	* m32r-tdep.c (m32r_memory_insert_breakpoint): Likewise.
	* microblaze-linux-tdep.c
	(microblaze_linux_memory_remove_breakpoint): Likewise.
	* monitor.c (monitor_insert_breakpoint): Likewise.
	* nto-procfs.c (procfs_insert_breakpoint): Likewise.
	(procfs_insert_hw_breakpoint): Likewise.
	* ppc-linux-nat.c (ppc_linux_insert_hw_breakpoint): Likewise.
	* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise.
	* remote-m32r-sdi.c (m32r_insert_breakpoint): Likewise.
	* remote-mips.c (mips_insert_breakpoint): Likewise.
	* x86-nat.c (x86_insert_hw_breakpoint): Likewise.
2014-10-03 12:54:34 +01:00
Gary Benson 6d3d12ebef Include string.h in common-defs.h
This commit includes string.h in common-defs.h and removes all other
inclusions.

gdb/
2014-08-07  Gary Benson  <gbenson@redhat.com>

	* common/common-defs.h: Include string.h.
	* aarch64-tdep.c: Do not include string.h.
	* ada-exp.y: Likewise.
	* ada-lang.c: Likewise.
	* ada-lex.l: Likewise.
	* ada-typeprint.c: Likewise.
	* ada-valprint.c: Likewise.
	* aix-thread.c: Likewise.
	* alpha-linux-tdep.c: Likewise.
	* alpha-mdebug-tdep.c: Likewise.
	* alpha-nat.c: Likewise.
	* alpha-osf1-tdep.c: Likewise.
	* alpha-tdep.c: Likewise.
	* alphanbsd-tdep.c: Likewise.
	* amd64-dicos-tdep.c: Likewise.
	* amd64-linux-tdep.c: Likewise.
	* amd64-nat.c: Likewise.
	* amd64-sol2-tdep.c: Likewise.
	* amd64fbsd-tdep.c: Likewise.
	* amd64obsd-tdep.c: Likewise.
	* arch-utils.c: Likewise.
	* arm-linux-nat.c: Likewise.
	* arm-linux-tdep.c: Likewise.
	* arm-tdep.c: Likewise.
	* arm-wince-tdep.c: Likewise.
	* armbsd-tdep.c: Likewise.
	* armnbsd-nat.c: Likewise.
	* armnbsd-tdep.c: Likewise.
	* armobsd-tdep.c: Likewise.
	* avr-tdep.c: Likewise.
	* ax-gdb.c: Likewise.
	* ax-general.c: Likewise.
	* bcache.c: Likewise.
	* bfin-tdep.c: Likewise.
	* breakpoint.c: Likewise.
	* build-id.c: Likewise.
	* buildsym.c: Likewise.
	* c-exp.y: Likewise.
	* c-lang.c: Likewise.
	* c-typeprint.c: Likewise.
	* c-valprint.c: Likewise.
	* charset.c: Likewise.
	* cli-out.c: Likewise.
	* cli/cli-cmds.c: Likewise.
	* cli/cli-decode.c: Likewise.
	* cli/cli-dump.c: Likewise.
	* cli/cli-interp.c: Likewise.
	* cli/cli-logging.c: Likewise.
	* cli/cli-script.c: Likewise.
	* cli/cli-setshow.c: Likewise.
	* cli/cli-utils.c: Likewise.
	* coffread.c: Likewise.
	* common/agent.c: Likewise.
	* common/buffer.c: Likewise.
	* common/buffer.h: Likewise.
	* common/common-utils.c: Likewise.
	* common/filestuff.c: Likewise.
	* common/filestuff.c: Likewise.
	* common/format.c: Likewise.
	* common/print-utils.c: Likewise.
	* common/rsp-low.c: Likewise.
	* common/signals.c: Likewise.
	* common/vec.h: Likewise.
	* common/xml-utils.c: Likewise.
	* core-regset.c: Likewise.
	* corefile.c: Likewise.
	* corelow.c: Likewise.
	* cp-abi.c: Likewise.
	* cp-name-parser.y: Likewise.
	* cp-support.c: Likewise.
	* cp-valprint.c: Likewise.
	* cris-tdep.c: Likewise.
	* d-exp.y: Likewise.
	* darwin-nat.c: Likewise.
	* dbxread.c: Likewise.
	* dcache.c: Likewise.
	* demangle.c: Likewise.
	* dicos-tdep.c: Likewise.
	* disasm.c: Likewise.
	* doublest.c: Likewise.
	* dsrec.c: Likewise.
	* dummy-frame.c: Likewise.
	* dwarf2-frame.c: Likewise.
	* dwarf2loc.c: Likewise.
	* dwarf2read.c: Likewise.
	* elfread.c: Likewise.
	* environ.c: Likewise.
	* eval.c: Likewise.
	* event-loop.c: Likewise.
	* exceptions.c: Likewise.
	* exec.c: Likewise.
	* expprint.c: Likewise.
	* f-exp.y: Likewise.
	* f-lang.c: Likewise.
	* f-typeprint.c: Likewise.
	* f-valprint.c: Likewise.
	* fbsd-nat.c: Likewise.
	* findcmd.c: Likewise.
	* findvar.c: Likewise.
	* fork-child.c: Likewise.
	* frame.c: Likewise.
	* frv-linux-tdep.c: Likewise.
	* frv-tdep.c: Likewise.
	* gdb.c: Likewise.
	* gdb_bfd.c: Likewise.
	* gdbarch.c: Likewise.
	* gdbarch.sh: Likewise.
	* gdbtypes.c: Likewise.
	* gnu-nat.c: Likewise.
	* gnu-v2-abi.c: Likewise.
	* gnu-v3-abi.c: Likewise.
	* go-exp.y: Likewise.
	* go-lang.c: Likewise.
	* go32-nat.c: Likewise.
	* guile/guile.c: Likewise.
	* guile/scm-auto-load.c: Likewise.
	* hppa-hpux-tdep.c: Likewise.
	* hppa-linux-nat.c: Likewise.
	* hppanbsd-tdep.c: Likewise.
	* hppaobsd-tdep.c: Likewise.
	* i386-cygwin-tdep.c: Likewise.
	* i386-dicos-tdep.c: Likewise.
	* i386-linux-tdep.c: Likewise.
	* i386-nto-tdep.c: Likewise.
	* i386-sol2-tdep.c: Likewise.
	* i386-tdep.c: Likewise.
	* i386bsd-tdep.c: Likewise.
	* i386gnu-nat.c: Likewise.
	* i386nbsd-tdep.c: Likewise.
	* i386obsd-tdep.c: Likewise.
	* i387-tdep.c: Likewise.
	* ia64-libunwind-tdep.c: Likewise.
	* ia64-linux-nat.c: Likewise.
	* inf-child.c: Likewise.
	* inf-ptrace.c: Likewise.
	* inf-ttrace.c: Likewise.
	* infcall.c: Likewise.
	* infcmd.c: Likewise.
	* inflow.c: Likewise.
	* infrun.c: Likewise.
	* interps.c: Likewise.
	* iq2000-tdep.c: Likewise.
	* irix5-nat.c: Likewise.
	* jv-exp.y: Likewise.
	* jv-lang.c: Likewise.
	* jv-typeprint.c: Likewise.
	* jv-valprint.c: Likewise.
	* language.c: Likewise.
	* linux-fork.c: Likewise.
	* linux-nat.c: Likewise.
	* lm32-tdep.c: Likewise.
	* m2-exp.y: Likewise.
	* m2-typeprint.c: Likewise.
	* m32c-tdep.c: Likewise.
	* m32r-linux-nat.c: Likewise.
	* m32r-linux-tdep.c: Likewise.
	* m32r-rom.c: Likewise.
	* m32r-tdep.c: Likewise.
	* m68hc11-tdep.c: Likewise.
	* m68k-tdep.c: Likewise.
	* m68kbsd-tdep.c: Likewise.
	* m68klinux-nat.c: Likewise.
	* m68klinux-tdep.c: Likewise.
	* m88k-tdep.c: Likewise.
	* machoread.c: Likewise.
	* macrocmd.c: Likewise.
	* main.c: Likewise.
	* mdebugread.c: Likewise.
	* mem-break.c: Likewise.
	* memattr.c: Likewise.
	* memory-map.c: Likewise.
	* mep-tdep.c: Likewise.
	* mi/mi-cmd-break.c: Likewise.
	* mi/mi-cmd-disas.c: Likewise.
	* mi/mi-cmd-env.c: Likewise.
	* mi/mi-cmd-stack.c: Likewise.
	* mi/mi-cmd-var.c: Likewise.
	* mi/mi-cmds.c: Likewise.
	* mi/mi-console.c: Likewise.
	* mi/mi-getopt.c: Likewise.
	* mi/mi-interp.c: Likewise.
	* mi/mi-main.c: Likewise.
	* mi/mi-parse.c: Likewise.
	* microblaze-rom.c: Likewise.
	* microblaze-tdep.c: Likewise.
	* mingw-hdep.c: Likewise.
	* minidebug.c: Likewise.
	* minsyms.c: Likewise.
	* mips-irix-tdep.c: Likewise.
	* mips-linux-tdep.c: Likewise.
	* mips-tdep.c: Likewise.
	* mips64obsd-tdep.c: Likewise.
	* mipsnbsd-tdep.c: Likewise.
	* mipsread.c: Likewise.
	* mn10300-linux-tdep.c: Likewise.
	* mn10300-tdep.c: Likewise.
	* monitor.c: Likewise.
	* moxie-tdep.c: Likewise.
	* mt-tdep.c: Likewise.
	* nat/linux-btrace.c: Likewise.
	* nat/linux-osdata.c: Likewise.
	* nat/linux-procfs.c: Likewise.
	* nat/linux-ptrace.c: Likewise.
	* nat/linux-waitpid.c: Likewise.
	* nbsd-tdep.c: Likewise.
	* nios2-linux-tdep.c: Likewise.
	* nto-procfs.c: Likewise.
	* nto-tdep.c: Likewise.
	* objc-lang.c: Likewise.
	* objfiles.c: Likewise.
	* opencl-lang.c: Likewise.
	* osabi.c: Likewise.
	* osdata.c: Likewise.
	* p-exp.y: Likewise.
	* p-lang.c: Likewise.
	* p-typeprint.c: Likewise.
	* parse.c: Likewise.
	* posix-hdep.c: Likewise.
	* ppc-linux-nat.c: Likewise.
	* ppc-sysv-tdep.c: Likewise.
	* ppcfbsd-tdep.c: Likewise.
	* ppcnbsd-tdep.c: Likewise.
	* ppcobsd-tdep.c: Likewise.
	* printcmd.c: Likewise.
	* procfs.c: Likewise.
	* prologue-value.c: Likewise.
	* python/py-auto-load.c: Likewise.
	* python/py-gdb-readline.c: Likewise.
	* ravenscar-thread.c: Likewise.
	* regcache.c: Likewise.
	* registry.c: Likewise.
	* remote-fileio.c: Likewise.
	* remote-m32r-sdi.c: Likewise.
	* remote-mips.c: Likewise.
	* remote-notif.c: Likewise.
	* remote-sim.c: Likewise.
	* remote.c: Likewise.
	* reverse.c: Likewise.
	* rs6000-aix-tdep.c: Likewise.
	* ser-base.c: Likewise.
	* ser-go32.c: Likewise.
	* ser-mingw.c: Likewise.
	* ser-pipe.c: Likewise.
	* ser-tcp.c: Likewise.
	* ser-unix.c: Likewise.
	* serial.c: Likewise.
	* sh-tdep.c: Likewise.
	* sh64-tdep.c: Likewise.
	* shnbsd-tdep.c: Likewise.
	* skip.c: Likewise.
	* sol-thread.c: Likewise.
	* solib-dsbt.c: Likewise.
	* solib-frv.c: Likewise.
	* solib-osf.c: Likewise.
	* solib-som.c: Likewise.
	* solib-spu.c: Likewise.
	* solib-target.c: Likewise.
	* solib.c: Likewise.
	* somread.c: Likewise.
	* source.c: Likewise.
	* sparc-nat.c: Likewise.
	* sparc-sol2-tdep.c: Likewise.
	* sparc-tdep.c: Likewise.
	* sparc64-tdep.c: Likewise.
	* sparc64fbsd-tdep.c: Likewise.
	* sparc64nbsd-tdep.c: Likewise.
	* sparcnbsd-tdep.c: Likewise.
	* spu-linux-nat.c: Likewise.
	* spu-multiarch.c: Likewise.
	* spu-tdep.c: Likewise.
	* stabsread.c: Likewise.
	* stack.c: Likewise.
	* std-regs.c: Likewise.
	* symfile.c: Likewise.
	* symmisc.c: Likewise.
	* symtab.c: Likewise.
	* target.c: Likewise.
	* thread.c: Likewise.
	* tilegx-linux-nat.c: Likewise.
	* tilegx-tdep.c: Likewise.
	* top.c: Likewise.
	* tracepoint.c: Likewise.
	* tui/tui-command.c: Likewise.
	* tui/tui-data.c: Likewise.
	* tui/tui-disasm.c: Likewise.
	* tui/tui-file.c: Likewise.
	* tui/tui-layout.c: Likewise.
	* tui/tui-out.c: Likewise.
	* tui/tui-regs.c: Likewise.
	* tui/tui-source.c: Likewise.
	* tui/tui-stack.c: Likewise.
	* tui/tui-win.c: Likewise.
	* tui/tui-windata.c: Likewise.
	* tui/tui-winsource.c: Likewise.
	* typeprint.c: Likewise.
	* ui-file.c: Likewise.
	* ui-out.c: Likewise.
	* user-regs.c: Likewise.
	* utils.c: Likewise.
	* v850-tdep.c: Likewise.
	* valarith.c: Likewise.
	* valops.c: Likewise.
	* valprint.c: Likewise.
	* value.c: Likewise.
	* varobj.c: Likewise.
	* vax-tdep.c: Likewise.
	* vaxnbsd-tdep.c: Likewise.
	* vaxobsd-tdep.c: Likewise.
	* windows-nat.c: Likewise.
	* xcoffread.c: Likewise.
	* xml-support.c: Likewise.
	* xstormy16-tdep.c: Likewise.
	* xtensa-linux-nat.c: Likewise.

gdb/gdbserver/
2014-08-07  Gary Benson  <gbenson@redhat.com>

	* server.h: Do not include string.h.
	* event-loop.c: Likewise.
	* linux-low.c: Likewise.
	* regcache.c: Likewise.
	* remote-utils.c: Likewise.
	* spu-low.c: Likewise.
	* utils.c: Likewise.
2014-08-07 09:06:47 +01:00
Pedro Alves 08351840ea Stale breakpoint instructions, spurious SIGTRAPS.
Without the code portion of the patch, we get these failures:

 FAIL: gdb.base/break-unload-file.exp: always-inserted on: break: continue
 FAIL: gdb.base/break-unload-file.exp: always-inserted on: hbreak: continue
 FAIL: gdb.base/sym-file.exp: stale bkpts: continue to breakpoint: end here

They all looks like random SIGTRAPs:

 continue
 Continuing.

 Program received signal SIGTRAP, Trace/breakpoint trap.
 0x0000000000400541 in foo () at ../../../src/gdb/testsuite/gdb.base/break-unload-file.c:21
 21      }
 (gdb) FAIL: gdb.base/break-unload-file.exp: always-inserted on: break: continue

(This is a regression caused by the remove-symbol-file command
series.)

break-unload-file.exp is about having breakpoints inserted, and then
doing "file".  I caught this while writing a test that does "file
PROGRAM", while PROGRAM was already loaded, which internally does
"file" first, because I wanted to force a breakpoint_re_set, but the
test is more explicit in case GDB ever optimizes out that re-set.

The problem is that unloading the file with "file" ends up in
disable_breakpoints_in_freed_objfile, which marks all breakpoint
locations of the objfile as both shlib_disabled, _and_ clears the
inserted flag, without actually removing the breakpoints from the
inferior.  Now, usually, in all-stop, breakpoints will already be
removed from the inferior before the user can issue the "file"
command, but, with non-stop, or breakpoints always-inserted on mode,
breakpoints stay inserted even while the user has the prompt.  In the
latter case, then, if we let the program continue, and it executes the
address where we had previously set the breakpoint, it'll actually
execute the breakpoint instruction that we left behind...

Now, one issue is that the intent of
disable_breakpoints_in_freed_objfile is really to handle the unloading
of OBJF_USERLOADED objfiles.  These are objfiles that were added with
add-symbol-file and that are removed with remove-symbol-file.

"add-symbol-file"'s docs in the manual clearly say these commands are
used to let GDB know about dynamically loaded code:

 You would use this command when @var{filename} has been dynamically
 loaded (by some other means) into the program that is running.

Similarly, the online help says:

 (gdb) help add-symbol-file
 Load symbols from FILE, assuming FILE has been dynamically loaded.

So it makes sense to, like when shared libraries are unloaded through
the generic solib machinery, mark the breakpoint locations as
shlib_disabled.  But, the "file" command is not about dynamically
loaded code, it's about the main program.  So the patch makes
disable_breakpoints_in_freed_objfile skip all objfiles but
OBJF_USERLOADED ones, thus skipping the main objfile.

Then, the reason that disable_breakpoints_in_freed_objfile was
clearing the inserted flag isn't clear, but likely to avoid breakpoint
removal errors, assuming remove-symbol-file was called after the
dynamic object was already unmapped from the inferior.  In that case,
it'd okay to simply clear the inserted flag, but not so if the user
for example does remove-symbol-file to remove the library because he
made a mistake in the library's address, and wants to re-do
add-symbol-file with the correct address.

To address all that, I propose an alternative implementation, that
handles both cases.  The patch includes changes to sym-file.exp to
cover them.

This implementation leaves the inserted flag alone, and handles
breakpoint insertion/removal failure gracefully when the locations are
in OBJF_USERLOADED objfiles, just like we handle insertion/removal
failure gracefully for locations in shared libraries.

To try to make sure we aren't patching back stale shadow memory
contents into the inferior, in case the program mapped a different
library at the same address where we had the breakpoint, without the
user having had a chance of remove-symbol-file'ing before, this adds a
new memory_validate_breakpoint function that checks if the breakpoint
instruction is still in memory.  ppc_linux_memory_remove_breakpoint
does this unconditionally for all memory breakpoints, and questions
whether memory_remove_breakpoint should be changed to do this for all
breakpoints.  Possibly yes, though I'm not certain, hence this
baby-steps patch.

Tested on x86_64 Fedora 17, native and gdbserver.

gdb/
2014-04-23  Pedro Alves  <palves@redhat.com>

	* breakpoint.c (insert_bp_location): Tolerate errors if the
	breakpoint is set in a user-loaded objfile.
	(remove_breakpoint_1): Likewise.  Also tolerate errors if the
	location is marked shlib_disabled.  If the breakpoint is set in a
	user-loaded objfile is a GDB-side memory breakpoint, validate it
	before uninsertion.  (disable_breakpoints_in_freed_objfile): Skip
	non-OBJF_USERLOADED objfiles.  Don't clear the location's inserted
	flag.
	* mem-break.c (memory_validate_breakpoint): New function.
	* objfiles.c (userloaded_objfile_contains_address_p): New
	function.
	* objfiles.h (userloaded_objfile_contains_address_p): Declare.
	* target.h (memory_validate_breakpoint): New declaration.

gdb/testsuite/
2014-04-23  Pedro Alves  <palves@redhat.com>

	* gdb.base/break-unload-file.c: New file.
	* gdb.base/break-unload-file.exp: New file.
	* gdb.base/sym-file-lib.c (baz): New function.
	* gdb.base/sym-file-loader.c (struct segment) <mapped_size>: New
	field.
	(load): Store the segment's mapped size.
	(unload): New function.
	(unload_shlib): New function.
	* gdb.base/sym-file-loader.h (unload_shlib): New declaration.
	* gdb.base/sym-file-main.c (main): Unload, and reload the library,
	set a breakpoint at baz, and call it.
	* gdb.base/sym-file.exp: New tests for stale breakpoint
	instructions.
2014-04-23 15:09:27 +01:00
Markus Metzger 3db08215d4 target, breakpoint: allow insert/remove breakpoint to be forwarded
2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

	* target.h (target_ops) <to_insert_breakpoint>
	<to_remove_breakpoint>: Add target_ops parameter.
	(forward_target_insert_breakpoint): New.
	(forward_target_remove_breakpoint): New.
	(memory_remove_breakpoint, memory_insert_breakpoint):
	Add target_ops parameter.
	* target.c (target_insert_breakpoint): Split into this and ...
	(forward_target_insert_breakpoint): ... this.
	(target_remove_breakpoint): Split into this and ...
	(forward_target_remove_breakpoint): ... this.
	(debug_to_insert_breakpoint): Add target_ops parameter.
	Call forward_target_insert_breakpoint.
	(debug_to_remove_breakpoint): Add target_ops parameter.
	Call forward_target_remove_breakpoint.
	(update_current_target): Do not inherit or default to_insert_breakpoint
	and to_remove_breakpoint.
	* corelow.c (ignore): Add target_ops parameter.
	* exec.c (ignore): Add target_ops parameter.
	* mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
	Add target_ops parameter.
	* monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
	Add target_ops parameter.
	* nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint):
	Add target_ops parameter.
	* record-full.c (record_full_beneath_to_insert_breakpoint)
	(record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint)
	(tmp_to_remove_breakpoint, record_full_insert_breakpoint)
	(record_full_remove_breakpoint, record_full_core_insert_breakpoint)
	(record_full_core_remove_breakpoint): Add target_ops parameter.
	Update users.
	(record_full_beneath_to_insert_breakpoint_ops)
	(record_full_beneath_to_remove_breakpoint_ops)
	(tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New.
	(record_full_open): Initialize tmp_to_insert_breakpoint_ops,
	tmp_to_remove_breakpoint_ops,
	record_full_beneath_to_insert_breakpoint_ops, and
	record_full_beneath_to_remove_breakpoint_ops.
	* remote-m32r-sdi.c (m32r_insert_breakpoint)
	(m32r_remove_breakpoint): Add target_ops parameter.
	* remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
	Add target_ops parameter.
	* remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
	Add target_ops parameter.
2014-01-16 13:06:13 +01:00
Joel Brobecker ecd75fc8ee Update Copyright year range in all files maintained by GDB. 2014-01-01 07:54:24 +04:00
Tom Tromey 0e9f083f4c remove gdb_string.h
This removes gdb_string.h.  This patch is purely mechanical.  I
created it by running the two commands:

    git rm common/gdb_string.h
    perl -pi -e's/"gdb_string.h"/<string.h>/;'  *.[chyl] */*.[chyl]

2013-11-18  Tom Tromey  <tromey@redhat.com>

	* common/gdb_string.h: Remove.
	* aarch64-tdep.c: Use string.h, not gdb_string.h.
	* ada-exp.y: Use string.h, not gdb_string.h.
	* ada-lang.c: Use string.h, not gdb_string.h.
	* ada-lex.l: Use string.h, not gdb_string.h.
	* ada-typeprint.c: Use string.h, not gdb_string.h.
	* ada-valprint.c: Use string.h, not gdb_string.h.
	* aix-thread.c: Use string.h, not gdb_string.h.
	* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
	* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
	* alpha-nat.c: Use string.h, not gdb_string.h.
	* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
	* alpha-tdep.c: Use string.h, not gdb_string.h.
	* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
	* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
	* amd64-linux-nat.c: Use string.h, not gdb_string.h.
	* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
	* amd64-nat.c: Use string.h, not gdb_string.h.
	* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
	* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
	* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
	* arch-utils.c: Use string.h, not gdb_string.h.
	* arm-linux-nat.c: Use string.h, not gdb_string.h.
	* arm-linux-tdep.c: Use string.h, not gdb_string.h.
	* arm-tdep.c: Use string.h, not gdb_string.h.
	* arm-wince-tdep.c: Use string.h, not gdb_string.h.
	* armbsd-tdep.c: Use string.h, not gdb_string.h.
	* armnbsd-nat.c: Use string.h, not gdb_string.h.
	* armnbsd-tdep.c: Use string.h, not gdb_string.h.
	* armobsd-tdep.c: Use string.h, not gdb_string.h.
	* avr-tdep.c: Use string.h, not gdb_string.h.
	* ax-gdb.c: Use string.h, not gdb_string.h.
	* ax-general.c: Use string.h, not gdb_string.h.
	* bcache.c: Use string.h, not gdb_string.h.
	* bfin-tdep.c: Use string.h, not gdb_string.h.
	* breakpoint.c: Use string.h, not gdb_string.h.
	* build-id.c: Use string.h, not gdb_string.h.
	* buildsym.c: Use string.h, not gdb_string.h.
	* c-exp.y: Use string.h, not gdb_string.h.
	* c-lang.c: Use string.h, not gdb_string.h.
	* c-typeprint.c: Use string.h, not gdb_string.h.
	* c-valprint.c: Use string.h, not gdb_string.h.
	* charset.c: Use string.h, not gdb_string.h.
	* cli-out.c: Use string.h, not gdb_string.h.
	* cli/cli-cmds.c: Use string.h, not gdb_string.h.
	* cli/cli-decode.c: Use string.h, not gdb_string.h.
	* cli/cli-dump.c: Use string.h, not gdb_string.h.
	* cli/cli-interp.c: Use string.h, not gdb_string.h.
	* cli/cli-logging.c: Use string.h, not gdb_string.h.
	* cli/cli-script.c: Use string.h, not gdb_string.h.
	* cli/cli-setshow.c: Use string.h, not gdb_string.h.
	* cli/cli-utils.c: Use string.h, not gdb_string.h.
	* coffread.c: Use string.h, not gdb_string.h.
	* common/common-utils.c: Use string.h, not gdb_string.h.
	* common/filestuff.c: Use string.h, not gdb_string.h.
	* common/linux-procfs.c: Use string.h, not gdb_string.h.
	* common/linux-ptrace.c: Use string.h, not gdb_string.h.
	* common/signals.c: Use string.h, not gdb_string.h.
	* common/vec.h: Use string.h, not gdb_string.h.
	* core-regset.c: Use string.h, not gdb_string.h.
	* corefile.c: Use string.h, not gdb_string.h.
	* corelow.c: Use string.h, not gdb_string.h.
	* cp-abi.c: Use string.h, not gdb_string.h.
	* cp-support.c: Use string.h, not gdb_string.h.
	* cp-valprint.c: Use string.h, not gdb_string.h.
	* cris-tdep.c: Use string.h, not gdb_string.h.
	* d-lang.c: Use string.h, not gdb_string.h.
	* dbxread.c: Use string.h, not gdb_string.h.
	* dcache.c: Use string.h, not gdb_string.h.
	* demangle.c: Use string.h, not gdb_string.h.
	* dicos-tdep.c: Use string.h, not gdb_string.h.
	* disasm.c: Use string.h, not gdb_string.h.
	* doublest.c: Use string.h, not gdb_string.h.
	* dsrec.c: Use string.h, not gdb_string.h.
	* dummy-frame.c: Use string.h, not gdb_string.h.
	* dwarf2-frame.c: Use string.h, not gdb_string.h.
	* dwarf2loc.c: Use string.h, not gdb_string.h.
	* dwarf2read.c: Use string.h, not gdb_string.h.
	* elfread.c: Use string.h, not gdb_string.h.
	* environ.c: Use string.h, not gdb_string.h.
	* eval.c: Use string.h, not gdb_string.h.
	* event-loop.c: Use string.h, not gdb_string.h.
	* exceptions.c: Use string.h, not gdb_string.h.
	* exec.c: Use string.h, not gdb_string.h.
	* expprint.c: Use string.h, not gdb_string.h.
	* f-exp.y: Use string.h, not gdb_string.h.
	* f-lang.c: Use string.h, not gdb_string.h.
	* f-typeprint.c: Use string.h, not gdb_string.h.
	* f-valprint.c: Use string.h, not gdb_string.h.
	* fbsd-nat.c: Use string.h, not gdb_string.h.
	* findcmd.c: Use string.h, not gdb_string.h.
	* findvar.c: Use string.h, not gdb_string.h.
	* fork-child.c: Use string.h, not gdb_string.h.
	* frame.c: Use string.h, not gdb_string.h.
	* frv-linux-tdep.c: Use string.h, not gdb_string.h.
	* frv-tdep.c: Use string.h, not gdb_string.h.
	* gdb.c: Use string.h, not gdb_string.h.
	* gdb_bfd.c: Use string.h, not gdb_string.h.
	* gdbarch.c: Use string.h, not gdb_string.h.
	* gdbtypes.c: Use string.h, not gdb_string.h.
	* gnu-nat.c: Use string.h, not gdb_string.h.
	* gnu-v2-abi.c: Use string.h, not gdb_string.h.
	* gnu-v3-abi.c: Use string.h, not gdb_string.h.
	* go-exp.y: Use string.h, not gdb_string.h.
	* go-lang.c: Use string.h, not gdb_string.h.
	* go32-nat.c: Use string.h, not gdb_string.h.
	* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
	* hppa-linux-nat.c: Use string.h, not gdb_string.h.
	* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
	* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
	* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
	* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
	* i386-linux-nat.c: Use string.h, not gdb_string.h.
	* i386-linux-tdep.c: Use string.h, not gdb_string.h.
	* i386-nto-tdep.c: Use string.h, not gdb_string.h.
	* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
	* i386-tdep.c: Use string.h, not gdb_string.h.
	* i386bsd-tdep.c: Use string.h, not gdb_string.h.
	* i386gnu-nat.c: Use string.h, not gdb_string.h.
	* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
	* i386obsd-tdep.c: Use string.h, not gdb_string.h.
	* i387-tdep.c: Use string.h, not gdb_string.h.
	* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
	* ia64-linux-nat.c: Use string.h, not gdb_string.h.
	* inf-child.c: Use string.h, not gdb_string.h.
	* inf-ptrace.c: Use string.h, not gdb_string.h.
	* inf-ttrace.c: Use string.h, not gdb_string.h.
	* infcall.c: Use string.h, not gdb_string.h.
	* infcmd.c: Use string.h, not gdb_string.h.
	* inflow.c: Use string.h, not gdb_string.h.
	* infrun.c: Use string.h, not gdb_string.h.
	* interps.c: Use string.h, not gdb_string.h.
	* iq2000-tdep.c: Use string.h, not gdb_string.h.
	* irix5-nat.c: Use string.h, not gdb_string.h.
	* jv-exp.y: Use string.h, not gdb_string.h.
	* jv-lang.c: Use string.h, not gdb_string.h.
	* jv-typeprint.c: Use string.h, not gdb_string.h.
	* jv-valprint.c: Use string.h, not gdb_string.h.
	* language.c: Use string.h, not gdb_string.h.
	* linux-fork.c: Use string.h, not gdb_string.h.
	* linux-nat.c: Use string.h, not gdb_string.h.
	* lm32-tdep.c: Use string.h, not gdb_string.h.
	* m2-exp.y: Use string.h, not gdb_string.h.
	* m2-typeprint.c: Use string.h, not gdb_string.h.
	* m32c-tdep.c: Use string.h, not gdb_string.h.
	* m32r-linux-nat.c: Use string.h, not gdb_string.h.
	* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
	* m32r-rom.c: Use string.h, not gdb_string.h.
	* m32r-tdep.c: Use string.h, not gdb_string.h.
	* m68hc11-tdep.c: Use string.h, not gdb_string.h.
	* m68k-tdep.c: Use string.h, not gdb_string.h.
	* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
	* m68klinux-nat.c: Use string.h, not gdb_string.h.
	* m68klinux-tdep.c: Use string.h, not gdb_string.h.
	* m88k-tdep.c: Use string.h, not gdb_string.h.
	* macrocmd.c: Use string.h, not gdb_string.h.
	* main.c: Use string.h, not gdb_string.h.
	* mdebugread.c: Use string.h, not gdb_string.h.
	* mem-break.c: Use string.h, not gdb_string.h.
	* memattr.c: Use string.h, not gdb_string.h.
	* memory-map.c: Use string.h, not gdb_string.h.
	* mep-tdep.c: Use string.h, not gdb_string.h.
	* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
	* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
	* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
	* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
	* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
	* mi/mi-cmds.c: Use string.h, not gdb_string.h.
	* mi/mi-console.c: Use string.h, not gdb_string.h.
	* mi/mi-getopt.c: Use string.h, not gdb_string.h.
	* mi/mi-interp.c: Use string.h, not gdb_string.h.
	* mi/mi-main.c: Use string.h, not gdb_string.h.
	* mi/mi-parse.c: Use string.h, not gdb_string.h.
	* microblaze-rom.c: Use string.h, not gdb_string.h.
	* microblaze-tdep.c: Use string.h, not gdb_string.h.
	* mingw-hdep.c: Use string.h, not gdb_string.h.
	* minidebug.c: Use string.h, not gdb_string.h.
	* minsyms.c: Use string.h, not gdb_string.h.
	* mips-irix-tdep.c: Use string.h, not gdb_string.h.
	* mips-linux-tdep.c: Use string.h, not gdb_string.h.
	* mips-tdep.c: Use string.h, not gdb_string.h.
	* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
	* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
	* mipsread.c: Use string.h, not gdb_string.h.
	* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
	* mn10300-tdep.c: Use string.h, not gdb_string.h.
	* monitor.c: Use string.h, not gdb_string.h.
	* moxie-tdep.c: Use string.h, not gdb_string.h.
	* mt-tdep.c: Use string.h, not gdb_string.h.
	* nbsd-tdep.c: Use string.h, not gdb_string.h.
	* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
	* nto-procfs.c: Use string.h, not gdb_string.h.
	* nto-tdep.c: Use string.h, not gdb_string.h.
	* objc-lang.c: Use string.h, not gdb_string.h.
	* objfiles.c: Use string.h, not gdb_string.h.
	* opencl-lang.c: Use string.h, not gdb_string.h.
	* osabi.c: Use string.h, not gdb_string.h.
	* osdata.c: Use string.h, not gdb_string.h.
	* p-exp.y: Use string.h, not gdb_string.h.
	* p-lang.c: Use string.h, not gdb_string.h.
	* p-typeprint.c: Use string.h, not gdb_string.h.
	* parse.c: Use string.h, not gdb_string.h.
	* posix-hdep.c: Use string.h, not gdb_string.h.
	* ppc-linux-nat.c: Use string.h, not gdb_string.h.
	* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
	* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
	* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
	* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
	* printcmd.c: Use string.h, not gdb_string.h.
	* procfs.c: Use string.h, not gdb_string.h.
	* prologue-value.c: Use string.h, not gdb_string.h.
	* python/py-auto-load.c: Use string.h, not gdb_string.h.
	* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
	* ravenscar-thread.c: Use string.h, not gdb_string.h.
	* regcache.c: Use string.h, not gdb_string.h.
	* registry.c: Use string.h, not gdb_string.h.
	* remote-fileio.c: Use string.h, not gdb_string.h.
	* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
	* remote-mips.c: Use string.h, not gdb_string.h.
	* remote-sim.c: Use string.h, not gdb_string.h.
	* remote.c: Use string.h, not gdb_string.h.
	* reverse.c: Use string.h, not gdb_string.h.
	* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
	* ser-base.c: Use string.h, not gdb_string.h.
	* ser-go32.c: Use string.h, not gdb_string.h.
	* ser-mingw.c: Use string.h, not gdb_string.h.
	* ser-pipe.c: Use string.h, not gdb_string.h.
	* ser-tcp.c: Use string.h, not gdb_string.h.
	* ser-unix.c: Use string.h, not gdb_string.h.
	* serial.c: Use string.h, not gdb_string.h.
	* sh-tdep.c: Use string.h, not gdb_string.h.
	* sh64-tdep.c: Use string.h, not gdb_string.h.
	* shnbsd-tdep.c: Use string.h, not gdb_string.h.
	* skip.c: Use string.h, not gdb_string.h.
	* sol-thread.c: Use string.h, not gdb_string.h.
	* solib-dsbt.c: Use string.h, not gdb_string.h.
	* solib-frv.c: Use string.h, not gdb_string.h.
	* solib-osf.c: Use string.h, not gdb_string.h.
	* solib-spu.c: Use string.h, not gdb_string.h.
	* solib-target.c: Use string.h, not gdb_string.h.
	* solib.c: Use string.h, not gdb_string.h.
	* somread.c: Use string.h, not gdb_string.h.
	* source.c: Use string.h, not gdb_string.h.
	* sparc-nat.c: Use string.h, not gdb_string.h.
	* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
	* sparc-tdep.c: Use string.h, not gdb_string.h.
	* sparc64-tdep.c: Use string.h, not gdb_string.h.
	* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
	* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
	* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
	* spu-linux-nat.c: Use string.h, not gdb_string.h.
	* spu-multiarch.c: Use string.h, not gdb_string.h.
	* spu-tdep.c: Use string.h, not gdb_string.h.
	* stabsread.c: Use string.h, not gdb_string.h.
	* stack.c: Use string.h, not gdb_string.h.
	* std-regs.c: Use string.h, not gdb_string.h.
	* symfile.c: Use string.h, not gdb_string.h.
	* symmisc.c: Use string.h, not gdb_string.h.
	* symtab.c: Use string.h, not gdb_string.h.
	* target.c: Use string.h, not gdb_string.h.
	* thread.c: Use string.h, not gdb_string.h.
	* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
	* tilegx-tdep.c: Use string.h, not gdb_string.h.
	* top.c: Use string.h, not gdb_string.h.
	* tracepoint.c: Use string.h, not gdb_string.h.
	* tui/tui-command.c: Use string.h, not gdb_string.h.
	* tui/tui-data.c: Use string.h, not gdb_string.h.
	* tui/tui-disasm.c: Use string.h, not gdb_string.h.
	* tui/tui-file.c: Use string.h, not gdb_string.h.
	* tui/tui-layout.c: Use string.h, not gdb_string.h.
	* tui/tui-out.c: Use string.h, not gdb_string.h.
	* tui/tui-regs.c: Use string.h, not gdb_string.h.
	* tui/tui-source.c: Use string.h, not gdb_string.h.
	* tui/tui-stack.c: Use string.h, not gdb_string.h.
	* tui/tui-win.c: Use string.h, not gdb_string.h.
	* tui/tui-windata.c: Use string.h, not gdb_string.h.
	* tui/tui-winsource.c: Use string.h, not gdb_string.h.
	* typeprint.c: Use string.h, not gdb_string.h.
	* ui-file.c: Use string.h, not gdb_string.h.
	* ui-out.c: Use string.h, not gdb_string.h.
	* user-regs.c: Use string.h, not gdb_string.h.
	* utils.c: Use string.h, not gdb_string.h.
	* v850-tdep.c: Use string.h, not gdb_string.h.
	* valarith.c: Use string.h, not gdb_string.h.
	* valops.c: Use string.h, not gdb_string.h.
	* valprint.c: Use string.h, not gdb_string.h.
	* value.c: Use string.h, not gdb_string.h.
	* varobj.c: Use string.h, not gdb_string.h.
	* vax-tdep.c: Use string.h, not gdb_string.h.
	* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
	* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
	* windows-nat.c: Use string.h, not gdb_string.h.
	* xcoffread.c: Use string.h, not gdb_string.h.
	* xml-support.c: Use string.h, not gdb_string.h.
	* xstormy16-tdep.c: Use string.h, not gdb_string.h.
	* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
2013-11-18 13:29:00 -07:00
Tom Tromey be7d37a2c3 * mem-break.c: Remove obsolete comment.
* bfin-tdep.c (bfin_breakpoint_from_pc): Fix comment.
2013-01-17 15:23:38 +00:00
Joel Brobecker 28e7fd6234 Update years in copyright notice for the GDB files.
Two modifications:
  1. The addition of 2013 to the copyright year range for every file;
  2. The use of a single year range, instead of potentially multiple
     year ranges, as approved by the FSF.
2013-01-01 06:33:28 +00:00
Joel Brobecker 35c63cd8ce Problem after hitting breakpoint on Windows (with GDBserver)
When debugging on Windows with GDBserver, the debugger starts
failing after hitting a breakpoint.  For instance:

    (gdb) b foo
    Breakpoint 1 at 0x40177e: file foo.adb, line 5.
    (gdb) cont
    Continuing.

    Breakpoint 1, foo () at foo.adb:5
    5          Put_Line ("Hello World.");  -- STOP
    (gdb) n

    Program received signal SIGSEGV, Segmentation fault.
    0x00401782 in foo () at foo.adb:5
    5          Put_Line ("Hello World.");  -- STOP

There are two issues:

  1. While trying to re-insert a breakpoint that is still inserted
     in memory, insert_bp_location wipes out the breakpoint location's
     shadow_contents.  As a consequence, we cannot restore the proper
     instruction when removing the breakpoint anymore.  That's why
     the inferior's behavior changes when trying to resume after
     the breakpoint was hit.

  2. mem-break.c:default_memory_insert_breakpoint passes a breakpoint
     location's shadow_contents as the buffer for a memory read.
     This reveals a limitation of the various memory-read target
     functions.  This patch documents this limitation and adjust
     the two calls that seem to hit that limitation.

gdb/ChangeLog:

        * breakpoint.c (breakpoint_xfer_memory): Add assertion.
        Update function description.
        (insert_bp_location): Do not wipe bl->target_info out.
        * mem-break.c: #include "gdb_string.h".
        (default_memory_insert_breakpoint): Do not call target_read_memory
        with a pointer to the breakpoint's shadow_contents buffer.  Use
        a local buffer instead.
        * m32r-tdep.c (m32r_memory_insert_breakpoint): Ditto.
2012-03-15 18:33:45 +00:00
Joel Brobecker 0b30217134 Copyright year update in most files of the GDB Project.
gdb/ChangeLog:

        Copyright year update in most files of the GDB Project.
2012-01-04 08:17:56 +00:00
Pedro Alves f0ba3972e9 2011-12-06 Pedro Alves <pedro@codesourcery.com>
gdb/
	* breakpoint.c (breakpoint_restore_shadows): Rename to ...
	(breakpoint_xfer_memory): ... this.  Change prototype.  Handle
	memory writes too.
	* breakpoint.h (breakpoint_restore_shadows): Delete.
	(breakpoint_xfer_memory): Declare.
	* mem-break.c (default_memory_insert_breakpoint)
	(default_memory_remove_breakpoint): Use target_write_raw_memory.
	(memory_xfer_partial): Rename to ...
	(memory_xfer_partial_1): ... this.  Don't mask out breakpoints
	here.
	(memory_xfer_partial): New.
	(target_write_raw_memory): New.
	* target.h (target_write_raw_memory): New.

	gdb/testsuite/
	* gdb.base/break-always.exp: Test changing memory at addresses
	with breakpoints inserted.
2011-12-06 20:03:14 +00:00
Joel Brobecker 7b6bb8daac run copyright.sh for 2011. 2011-01-01 15:34:07 +00:00
Michael Snyder 6b4398f7cd 2010-05-06 Michael Snyder <msnyder@vmware.com>
* osabi.c (_initialize_gdb_osabi): Delete unused variable.
	* memattr.c (mem_delete): Delete unused variable.
	(invalidate_target_mem_regions): Delete unused variable.
	* mem-break.c (default_memory_insert_breakpoint):
	Delete unused variable.
	* target.c (target_get_osdata): Delete unused variable.
	* parse.c (length_of_subexp): Delete unused variable.
	(prefixify_subexp): Delete unused variable.
	(exp_iterate): Delete unused variable.
	* reverse.c (delete_bookmark_command): Delete unused variable.
2010-05-06 22:29:49 +00:00
Joel Brobecker 4c38e0a4fc Update copyright year in most headers.
Automatic update by copyright.sh.
2010-01-01 07:32:07 +00:00
Ulrich Weigand a6d9a66e23 * breakpoint.h (struct breakpoint): New member GDBARCH.
* breakpoint.c: Include "arch-utils.h".
	(set_raw_breakpoint_without_location): Add GDBARCH parameter.
	Use it to set breakpoint architecture.
	(set_raw_breakpoint): Add GDBARCH parameter.
	(create_internal_breakpoint): Likewise.
	(create_catchpoint): Likewise.
	(create_fork_vfork_event_catchpoint): Likewise.
	(create_breakpoint): Likewise.
	(create_breakpoints): Likewise.
	(break_command_really): Likewise.
	(create_ada_exception_breakpoint): Likewise.
	Update local callers to pass architecture:
	(create_internal_breakpoint): Update.
	(create_overlay_event_breakpoint): Update.
	(create_longjmp_master_breakpoint): Update.
	(create_thread_event_breakpoint): Update.
	(create_solib_event_breakpoint): Update.
	(create_catchpoint): Update.
	(create_fork_vfork_event_catchpoint): Update.
	(set_momentary_breakpoint): Update.
	(clone_momentary_breakpoint): Update.
	(create_breakpoint): Update.
	(create_breakpoints): Update.
	(break_command_really): Update.
	(break_command_1): Update.
	(set_breakpoint): Update.
	(watch_command_1): Update.
	(catch_fork_command_1): Update.
	(catch_exec_commnd_1): Update.
	(handle_gnu_v3_exceptions): Update.
	(create_ada_exception_breakpoint): Update.
	(catch_ada_exception_command): Update.
	(catch_assert_command): Update.
	(trace_command): Update.

	* breakpoint.h (struct bp_location): New member GDBARCH.
	* breakpoint.c (get_sal_arch): New function.
	(set_raw_breakpoint): Set location architecture.
	(add_location_to_breakpoint): Likewise.
	(clone_momentary_breakpoint): Likewise.
	(watch_command_1): Likewise.
	(update_watchpoint): Likewise.
	(bp_loc_is_permanent): Use location architecture instead of
	current_gdbarch.
	(adjust_breakpoint_address): Add GDBARCH parameter; use it
	instead of current_gdbarch.
	Update callers of adjust_breakpoint_address to pass
	breakpoint location architecture:
	(set_raw_breakpoint): Update.
	(watch_command_1): Update.

        * tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead
	of current_gdbarch.
	(add_local_symbols): Add GDBARCH parameter.  Pass to collect_symbol.
	(encode_actions): Pass tracepoint architecture to add_local_symbols
	(encode_actions): Use tracepoint architecture instead of
	current_gdbarch.  Pass it to add_local_symbols and collect_symbol.

	* breakpoint.h (struct breakpoint_ops): Replace last_addr parameter
	of print_one callback with last_loc.
	* breakpoint.c (print_one_breakpoint_location): Replace last_addr
	parameter with last_loc.
	(print_one_breakpoint): Likewise.
	(do_captured_breakpoint_query): Update call.
	(breakpoint_1): Pass last_loc instead of last_addr to
	print_one_breakpoint.  Pass last location architecture instead of
	current_gdbarch to set_next_address.
	Update all implementations of the print_one callback:
	* breakpoint.c (print_one_catch_fork): Update.
	(print_one_catch_vfork): Update.
	(print_one_catch_exec): Update.
	(print_one_exception_catchpoint): Update.
	* ada-lang.c (print_one_exception): Update.
	(print_one_catch_exception): Update.
	(print_one_catch_exception_unhandled): Update.
	(print_one_catch_assert): Update.

	* breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS
	parameter.  Use it instead of gdbarch_addr_bit (current_gdbarch).
	(print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it
	to print_one_breakpoint_location.
	(breakpoint_address_bits): New function.
	(do_captured_breakpoint_query): Compute number of address bits to print
	and pass it to print_one_breakpoint.
	(breakpoint_1): Likewise.  Use it instead of current_gdbarch.

	* breakpoint.h (create_thread_event_breakpoint): Add GDBARCH.
	* breakpoint.c (create_thread_event_breakpoint): Likewise.
	Update callers to create_thread_event_breakpoint:
	* aix-thread.c (pd_enable): Update.
	* linux-thread-db.c (enable_thread_event): Update.

	* breakpoint.h (create_solib_event_breakpoint): Add GDBARCH.
	* breakpoint.c (create_solib_event_breakpoint): Likewise.
	Update callers to create_solib_event_breakpoint:
	* solib-frv.c (enable_break, enable_break2): Update.
	* solib-pa64.c (pa64_solib_create_inferior_hook): Update.
	* solib-som.c (som_solib_create_inferior_hook): Update.
	* solib-darwin.c (darwin_solib_create_inferior_hook): Update.
	* solib-svr4.c (enable_break): Update.

	* breakpoint.h (insert_single_step_breakpoint): Add GDBARCH.
	* breakpoint.c (insert_single_step_breakpoint): Likewise.
	Update callers to insert_single_step_breakpoint:
	* alpha-tdep.c (alpha_software_single_step): Update.
	* arm-linux-tdep.c (arm_linux_software_single_step): Update.
	* arm-tdep.c (arm_software_single_step): Update.
	* cris-tdep.c (cris_software_single_step): Update.
	* rs6000-aix-tdep.c (rs6000_software_single_step): Update.
	* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update.
	* sparc-tdep.c (sparc_software_single_step): Update.
	* spu-tdep.c (spu_software_single_step): Update.
	* mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter.
	Pass it to insert_single_step_breakpoint.
	(mips_software_single_step): Pass architecture to
	deal_with_atomic_sequence and insert_single_step_breakpoint.

	* breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH.
	(deprecated_remove_raw_breakpoint): Likewise.
	* breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH.
	(deprecated_remove_raw_breakpoint): Likewise.
	Update callers to deprecated_insert_raw_breakpoint and
	deprecated_remove_raw_breakpoint:
	* breakpoint.c (single_step_gdbarch): New static variable.
	(insert_single_step_breakpoint): Pass GDBARCH parameter to
	deprecated_insert_raw_breakpoint.  Store it in single_step_gdbarch.
	(remove_single_step_breakpoints): Pass architecture stored in
	single_step_gdbarch to deprecated_remove_raw_breakpoint.
	* rs6000-nat.c (exec_one_dummy_insn): Update.
	* solib-irix.c (enable_break, disable_break): Update.
	* procfs.c (procfs_mourn_inferior): Update.
	(remove_dbx_link_breakpoint): Update.

	* breakpoint.h (set_breakpoint): Add GDBARCH parameter.
	(set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
	* breakpoint.c (set_breakpoint): Add GDBARCH parameter.
	(set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
	Update callers to set_breakpoint, set_momentary_breakpoint and
	set_momentary_breakpoint_at_pc:
	* breakpoint.c (set_momentary_breakpoint_at_pc): Update.
	(until_break_command): Update.
	* infcall.c (call_function_by_hand): Update.
	* infcmd.c (finish_backward, finish_forward): Update.
	* infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH
	parameter.  Pass it to set_momentary_breakpoint.
	(insert_longjmp_resume_breakpoint): Add GDBARCH parameter.
	Pass it to set_momentary_breakpoint_at_pc.
	(handle_inferior_event): Update.
	(insert_step_resume_breakpoint_at_frame): Update.
	(insert_step_resume_breakpoint_at_caller): Update..
	* mi/mi-cmd-break.c: Include "arch-utils.h".
	(mi_cmd_break_insert): Update.

	* target.h (struct target_ops): Add GDBARCH parameter to
	to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint,
	and to_remove_hw_breakpoint members.
	(target_insert_breakpoint, target_remove_breakpoint,
	target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH
	parameter, pass to target routine.
	(memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH
	parameter.
	* target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint,
	debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add
	GDBARCH parameter, pass to target routine.
	(update_current_target): Update function signature.
	* breakpoint.c (insert_bp_location, remove_breakpoint,
	deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint):
	Pass architecture to target_ routines.
	Update all implementations of the target breakpoint routines to take
	GDBARCH parameter and use it instead of GDBARCH as appropriate:
	* corelow.c (ignore): Update.
	* exec.c (ignore): Update.
	* mem-break.c (memory_insert_breakpoint): Update.
	(memory_remove_breakpoint): Update.
	* monitor.c (monitor_insert_breakpoint): Update.
	(monitor_remove_breakpoint): Update.
	* record.c (record_insert_breakpoint): Update.
	(record_beneath_to_insert_breakpoint): Update.
	(record_remove_breakpoint): Update.
	(record_beneath_to_remove_breakpoint): Update.
	* remote.c (remote_insert_breakpoint): Update.
	(remote_remove_breakpoint): Update.
	(remote_insert_hw_breakpoint): Update.
	(remote_remove_hw_breakpoint): Update.
	* remote-m32r-sdi.c (m32r_insert_breakpoint): Update.
	(m32r_remove_breakpoint): Update.
	* remote-mips.c (mips_insert_breakpoint): Update.
	(mips_remove_breakpoint): Update.
	* i386-nat.c (i386_insert_hw_breakpoint): Update.
	(i386_remove_hw_breakpoint): Update.
	* nto-procfs.c (procfs_insert_breakpoint):  Update.
	(procfs_remove_breakpoint): Update.
	(procfs_insert_hw_breakpoint): Update.
	(procfs_remove_hw_breakpoint): Update.

doc/ChangeLog:

	* gdbint.texi (Examples of Use of @code{ui_out} functions):
	Update example code extrated from breakpoint.c.
2009-07-02 17:12:28 +00:00
Joel Brobecker 0fb0cc7590 Updated copyright notices for most files. 2009-01-03 05:58:08 +00:00
Markus Deuling ae4b228419 * gdbarch.sh (memory_insert_breakpoint, memory_remove_breakpoint): Add
gdbarch as parameter.

	* gdbarch.{c,h}: Regenerate.

	* ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Add gdbarch as
	parameter.
	* mem-break.c (default_memory_insert_breakpoint)
	(default_memory_remove_breakpoint): Likewise.
	* target.h (default_memory_remove_breakpoint)
	(default_memory_insert_breakpoint): Likewise.

	* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Add gdbarch as
	parameter. Replace current_gdbarch by gdbarch.
	* m32r-tdep.c (m32r_memory_insert_breakpoint)
	(m32r_memory_remove_breakpoint): Likewise.
2008-02-20 14:31:40 +00:00
Daniel Jacobowitz 9b254dd1ce Updated copyright notices for most files. 2008-01-01 22:53:26 +00:00
Joel Brobecker a9762ec78a Switch the license of all .c files to GPLv3.
Switch the license of all .h files to GPLv3.
        Switch the license of all .cc files to GPLv3.
2007-08-23 18:08:50 +00:00
Ulrich Weigand 3b3b875c48 2007-06-13 Markus Deuling <deuling@de.ibm.com>
* gdbarch.sh (BREAKPOINT_FROM_PC): Replace by
	gdbarch_breakpoint_from_pc.
	* s390-tdep.c (s390_gdbarch_init): Likewise (comment).
	* remote.c (remote_insert_breakpoint)
	(remote_insert_hw_breakpoint): Likewise.
	* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise.
	* mips-tdep.c (mips_breakpoint_from_pc): Likewise (comment).
	* breakpoint.h (bp_target_info): Likewise (comment).
	* breakpoint.c (read_memory_nobpt): Likewise.
	* mem-break.c (default_memory_insert_breakpoint): Likewise.
	(symtab.h, breakpoint.h): Remove include. Remove unnecessary comment.
	* gdbarch.c, gdbarch.h: Regenerate.
2007-06-13 17:38:43 +00:00
Ulrich Weigand 8da95a3048 2007-06-09 Markus Deuling <deuling@de.ibm.com>
* gdbarch.sh (MEMORY_INSERT_BREAKPOINT): Replace by
	gdbarch_memory_insert_breakpoint.
	* mem-break.c (memory_insert_breakpoint): Likewise.
	* gdbarch.sh (MEMORY_REMOVE_BREAKPOINT): Replace by
	gdbarch_memory_remove_breakpoint.
	* mem-break.c (memory_remove_breakpoint): Likewise.
	* gdbarch.c, gdbarch.h: Regenerate.
2007-06-09 14:02:39 +00:00
Daniel Jacobowitz 6aba47ca06 Copyright updates for 2007. 2007-01-09 17:59:20 +00:00
Daniel Jacobowitz 8181d85fdc gdb/
* breakpoint.c (deprecated_read_memory_nobpt): Update to use
	shadow_len.
	(insert_bp_location, reattach_breakpoints, remove_breakpoint)
	(delete_breakpoint): Update calls to changed methods.
	(deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint)
	(single_step_breakpoints, insert_single_step_breakpoint)
	(remove_single_step_breakpoints): New.
	* breakpoint.h (struct bp_target_info): New.
	(struct bp_location): Replace shadow_contents with
	target_info and overlay_target_info.
	(deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint)
	(insert_single_step_breakpoint, remove_single_step_breakpoints): New
	prototypes.
	* gdbarch.sh: Forward declare struct bp_target_info in gdbarch.h.
	(memory_insert_breakpoint, memory_remove_breakpoint): Update second
	argument.
	* mem-break.c (default_memory_insert_breakpoint): Update.  Set
	placed_address, placed_size, and shadow_len.
	(default_memory_remove_breakpoint): Update.  Don't use
	BREAKPOINT_FROM_PC.
	(memory_insert_breakpoint, memory_remove_breakpoint): Update.
	* target.c (update_current_target): Update prototypes for changed
	functions.
	(debug_to_insert_breakpoint, debug_to_remove_breakpoint)
	(debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint):
	Update.
	* target.h: Forward declare struct bp_target_info.
	(struct target_ops): Use a bp_target_info argument for
	to_insert_breakpoint, to_remove_breakpoint,
	to_insert_hw_breakpoint, and to_remove_hw_breakpoint.
	(target_insert_breakpoint, target_remove_breakpoint)
	(target_insert_hw_breakpoint, target_remove_hw_breakpoint)
	(memory_insert_breakpoint, memory_remove_breakpoint)
	(default_memory_insert_breakpoint, default_memory_remove_breakpoint):
	Update.
	* config/i386/nm-i386.h: Forward declare struct bp_target_info.
	(i386_insert_hw_breakpoint, i386_remove_hw_breakpoint): Update.
	(target_insert_hw_breakpoint, target_remove_hw_breakpoint): Likewise.

	* gdbarch.c, gdbarch.h: Regenerated.

	* alpha-tdep.c (alpha_software_single_step): Use
	insert_single_step_breakpoint and remove_single_step_breakpoints.
	Remove unused statics.
	* arm-tdep.c (arm_software_single_step): Likewise.  Add a note.
	* cris-tdep.c (cris_software_single_step): Likewise.
	* mips-tdep.c (mips_software_single_step): Likewise.
	* rs6000-tdep.c (rs6000_software_single_step): Likewise.
	* sparc-tdep.c (sparc_software_single_step): Likewise.
	* wince.c (struct thread_info_struct): Remove step_prev.
	(undoSStep): Use remove_single_step_breakpoints.
	(wince_software_single_step): Use insert_single_step_breakpoint.

	* corelow.c (ignore): Remove unneeded prototype.  Update arguments.
	* exec.c (ignore): Likewise.
	* sol-thread.c (ignore): Likewise.

	* procfs.c (dbx_link_shadow_contents): Delete.
	(dbx_link_bpt): New.
	(procfs_mourn_inferior): Remove it if necessary.
	(remove_dbx_link_breakpoint): Use it.
	(insert_dbx_link_bpt_in_file): Set it.
	(procfs_init_inferior): Don't update dbx_link_bpt_addr.
	* rs6000-nat.c (exec_one_dummy_insn): Use
	deprecated_insert_raw_breakpoint and
	deprecated_remove_raw_breakpoint.
	* solib-irix.c (shadow_contents, breakpoint_addr): Delete.
	(base_breakpoint): New.
	(disable_break): Use it.
	(enable_break): Set it.

	* i386-nat.c (i386_insert_hw_breakpoint, i386_remove_hw_breakpoint):
	Update.
	* ia64-tdep.c (ia64_memory_insert_breakpoint)
	(ia64_memory_remove_breakpoint): Likewise.
	* m32r-tdep.c (m32r_memory_insert_breakpoint)
	(m32r_memory_remove_breakpoint): Likewise.
	* monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
	Likewise.  Remove unnecessary prototypes.  Use placed_address
	and placed_size.  Removed useless read from memory.
	* nto-procfs.c (procfs_insert_breakpoint)
	(procfs_remove_breakpoint, procfs_insert_hw_breakpoint)
	(procfs_remove_hw_breakpoint): Update.
	* ocd.c (ocd_insert_breakpoint, ocd_remove_breakpoint): Likewise.
	* ocd.h (ocd_insert_breakpoint, ocd_remove_breakpoint): Likewise.
	* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise.
	* ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Likewise.
	* remote-e7000.c (e7000_insert_breakpoint)
	(e7000_remove_breakpoint): Likewise.
	* remote-m32r-sdi.c (m32r_insert_breakpoint)
	(m32r_remove_breakpoint): Likewise.
	* remote-mips.c (mips_insert_breakpoint)
	(mips_remove_breakpoint): Likewise.
	* remote-rdp.c (remote_rdp_insert_breakpoint)
	(remote_rdp_remove_breakpoint): Likewise.
	(rdp_step): Use deprecated_insert_raw_breakpoint and
	deprecated_remove_raw_breakpoint.
	* remote-sds.c (sds_insert_breakpoint, sds_remove_breakpoint):
	Update.
	* remote-sim.c (gdbsim_insert_breakpoint, gdbsim_remove_breakpoint):
	Delete.
	(init_gdbsim_ops): Use memory_insert_breakpoint and
	memory_remove_breakpoint.
	* remote-st.c (st2000_insert_breakpoint)
	(st2000_remove_breakpoint): Update.  Remove unused
	BREAKPOINT_FROM_PC.
	* remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
	Update.  Use placed_address and placed_size.
	(remote_insert_hw_breakpoint, remote_remove_hw_breakpoint): Likewise.
gdb/doc/
	* gdbint.texinfo (x86 Watchpoints, Target Conditionals): Update insert
	and remove breakpoint prototypes.
	(Watchpoints): Move description of target_insert_hw_breakpoint and
	target_remove_hw_breakpoint ...
	(Breakpoints): ... to here.  Document target_insert_breakpoint and
	target_remove_breakpoint.
2006-04-18 19:20:08 +00:00
Eli Zaretskii 197e01b6dc * breakpoint.c:
* arm-tdep.c:
	* ia64-tdep.c:
	* i386-tdep.c:
	* hpread.c:
	* hppa-tdep.c:
	* hppa-hpux-tdep.c:
	* gnu-nat.c:
	* gdbtypes.c:
	* gdbarch.h:
	* gdbarch.c:
	* eval.c:
	* dwarf2read.c:
	* dbxread.c:
	* copying:
	* symfile.c:
	* stabsread.c:
	* sh64-tdep.c:
	* sh-tdep.c:
	* s390-tdep.c:
	* rs6000-tdep.c:
	* remote.c:
	* remote-mips.c:
	* mips-tdep.c:
	* mdebugread.c:
	* linux-nat.c:
	* infrun.c:
	* xcoffread.c:
	* win32-nat.c:
	* valops.c:
	* utils.c:
	* tracepoint.c:
	* target.c:
	* symtab.c:
	* c-exp.y:
	* ada-valprint.c:
	* ada-typeprint.c:
	* ada-lex.l:
	* ada-lang.h:
	* ada-lang.c:
	* ada-exp.y:
	* alphafbsd-tdep.c:
	* alphabsd-tdep.h:
	* alphabsd-tdep.c:
	* alphabsd-nat.c:
	* alpha-tdep.h:
	* alpha-tdep.c:
	* alpha-osf1-tdep.c:
	* alpha-nat.c:
	* alpha-mdebug-tdep.c:
	* alpha-linux-tdep.c:
	* alpha-linux-nat.c:
	* aix-thread.c:
	* abug-rom.c:
	* arch-utils.c:
	* annotate.h:
	* annotate.c:
	* amd64obsd-tdep.c:
	* amd64obsd-nat.c:
	* amd64nbsd-tdep.c:
	* amd64nbsd-nat.c:
	* amd64fbsd-tdep.c:
	* amd64fbsd-nat.c:
	* amd64bsd-nat.c:
	* amd64-tdep.h:
	* amd64-tdep.c:
	* amd64-sol2-tdep.c:
	* amd64-nat.h:
	* amd64-nat.c:
	* amd64-linux-tdep.c:
	* amd64-linux-nat.c:
	* alphanbsd-tdep.c:
	* block.h:
	* block.c:
	* bfd-target.h:
	* bfd-target.c:
	* bcache.h:
	* bcache.c:
	* ax.h:
	* ax-general.c:
	* ax-gdb.h:
	* ax-gdb.c:
	* avr-tdep.c:
	* auxv.h:
	* auxv.c:
	* armnbsd-tdep.c:
	* armnbsd-nat.c:
	* arm-tdep.h:
	* arm-linux-nat.c:
	* arch-utils.h:
	* charset.c:
	* call-cmds.h:
	* c-valprint.c:
	* c-typeprint.c:
	* c-lang.h:
	* c-lang.c:
	* buildsym.h:
	* buildsym.c:
	* bsd-uthread.h:
	* bsd-uthread.c:
	* bsd-kvm.h:
	* bsd-kvm.c:
	* breakpoint.h:
	* core-regset.c:
	* core-aout.c:
	* completer.h:
	* completer.c:
	* complaints.h:
	* complaints.c:
	* command.h:
	* coffread.c:
	* coff-solib.h:
	* coff-solib.c:
	* coff-pe-read.h:
	* coff-pe-read.c:
	* cli-out.h:
	* cli-out.c:
	* charset.h:
	* dink32-rom.c:
	* dictionary.h:
	* dictionary.c:
	* demangle.c:
	* defs.h:
	* dcache.h:
	* dcache.c:
	* d10v-tdep.c:
	* cpu32bug-rom.c:
	* cp-valprint.c:
	* cp-support.h:
	* cp-support.c:
	* cp-namespace.c:
	* cp-abi.h:
	* cp-abi.c:
	* corelow.c:
	* corefile.c:
	* environ.c:
	* elfread.c:
	* dwarfread.c:
	* dwarf2loc.c:
	* dwarf2expr.h:
	* dwarf2expr.c:
	* dwarf2-frame.h:
	* dwarf2-frame.c:
	* dve3900-rom.c:
	* dummy-frame.h:
	* dummy-frame.c:
	* dsrec.c:
	* doublest.h:
	* doublest.c:
	* disasm.h:
	* disasm.c:
	* fork-child.c:
	* findvar.c:
	* fbsd-nat.h:
	* fbsd-nat.c:
	* f-valprint.c:
	* f-typeprint.c:
	* f-lang.h:
	* f-lang.c:
	* expression.h:
	* expprint.c:
	* exec.h:
	* exec.c:
	* exceptions.h:
	* exceptions.c:
	* event-top.h:
	* event-top.c:
	* event-loop.h:
	* event-loop.c:
	* gdb.c:
	* gdb-stabs.h:
	* gdb-events.h:
	* gdb-events.c:
	* gcore.c:
	* frv-tdep.h:
	* frv-tdep.c:
	* frv-linux-tdep.c:
	* frame.h:
	* frame.c:
	* frame-unwind.h:
	* frame-unwind.c:
	* frame-base.h:
	* frame-base.c:
	* gdb_vfork.h:
	* gdb_thread_db.h:
	* gdb_string.h:
	* gdb_stat.h:
	* gdb_regex.h:
	* gdb_ptrace.h:
	* gdb_proc_service.h:
	* gdb_obstack.h:
	* gdb_locale.h:
	* gdb_dirent.h:
	* gdb_curses.h:
	* gdb_assert.h:
	* gdbarch.sh:
	* gdb.h:
	* hpux-thread.c:
	* hppabsd-nat.c:
	* hppa-tdep.h:
	* hpacc-abi.c:
	* h8300-tdep.c:
	* gregset.h:
	* go32-nat.c:
	* gnu-v3-abi.c:
	* gnu-v2-abi.h:
	* gnu-v2-abi.c:
	* gnu-nat.h:
	* glibc-tdep.c:
	* gdbtypes.h:
	* gdbcore.h:
	* gdbcmd.h:
	* i386nbsd-tdep.c:
	* i386nbsd-nat.c:
	* i386gnu-tdep.c:
	* i386gnu-nat.c:
	* i386fbsd-tdep.c:
	* i386fbsd-nat.c:
	* i386bsd-tdep.c:
	* i386bsd-nat.h:
	* i386bsd-nat.c:
	* i386-tdep.h:
	* i386-sol2-nat.c:
	* i386-nto-tdep.c:
	* i386-nat.c:
	* i386-linux-tdep.h:
	* i386-linux-tdep.c:
	* i386-linux-nat.c:
	* i386-cygwin-tdep.c:
	* inf-ttrace.c:
	* inf-ptrace.h:
	* inf-ptrace.c:
	* inf-loop.h:
	* inf-loop.c:
	* inf-child.h:
	* inf-child.c:
	* ia64-tdep.h:
	* ia64-linux-nat.c:
	* i387-tdep.h:
	* i387-tdep.c:
	* i386v4-nat.c:
	* i386v-nat.c:
	* i386obsd-tdep.c:
	* i386obsd-nat.c:
	* kod.c:
	* jv-valprint.c:
	* jv-typeprint.c:
	* jv-lang.h:
	* jv-lang.c:
	* irix5-nat.c:
	* iq2000-tdep.c:
	* interps.h:
	* interps.c:
	* inftarg.c:
	* inflow.h:
	* inflow.c:
	* inferior.h:
	* infcmd.c:
	* infcall.h:
	* infcall.c:
	* inf-ttrace.h:
	* m32r-tdep.h:
	* m32r-tdep.c:
	* m32r-rom.c:
	* m32r-linux-tdep.c:
	* m32r-linux-nat.c:
	* m2-valprint.c:
	* m2-typeprint.c:
	* m2-lang.h:
	* m2-lang.c:
	* lynx-nat.c:
	* linux-thread-db.c:
	* linux-nat.h:
	* linespec.c:
	* libunwind-frame.h:
	* libunwind-frame.c:
	* language.h:
	* language.c:
	* macroexp.c:
	* macrocmd.c:
	* m88kbsd-nat.c:
	* m88k-tdep.h:
	* m88k-tdep.c:
	* m68klinux-tdep.c:
	* m68klinux-nat.c:
	* m68kbsd-tdep.c:
	* m68kbsd-nat.c:
	* m68k-tdep.h:
	* m68k-tdep.c:
	* mips-linux-nat.c:
	* mips-irix-tdep.c:
	* minsyms.c:
	* memattr.h:
	* memattr.c:
	* mem-break.c:
	* mdebugread.h:
	* main.h:
	* main.c:
	* macrotab.h:
	* macrotab.c:
	* macroscope.h:
	* macroscope.c:
	* macroexp.h:
	* nbsd-tdep.c:
	* mt-tdep.c:
	* monitor.h:
	* monitor.c:
	* mn10300-tdep.h:
	* mn10300-tdep.c:
	* mn10300-linux-tdep.c:
	* mipsv4-nat.c:
	* mipsread.c:
	* mipsnbsd-tdep.h:
	* mipsnbsd-tdep.c:
	* mipsnbsd-nat.c:
	* mips64obsd-tdep.c:
	* mips64obsd-nat.c:
	* mips-tdep.h:
	* mips-mdebug-tdep.c:
	* mips-linux-tdep.c:
	* osabi.h:
	* osabi.c:
	* ocd.h:
	* ocd.c:
	* observer.c:
	* objfiles.h:
	* objfiles.c:
	* objc-lang.h:
	* objc-lang.c:
	* objc-exp.y:
	* nto-tdep.h:
	* nto-tdep.c:
	* nto-procfs.c:
	* nlmread.c:
	* nbsd-tdep.h:
	* ppcobsd-tdep.c:
	* ppcobsd-nat.c:
	* ppcnbsd-tdep.h:
	* ppcnbsd-tdep.c:
	* ppcnbsd-nat.c:
	* ppcbug-rom.c:
	* ppc-tdep.h:
	* ppc-sysv-tdep.c:
	* ppc-linux-tdep.c:
	* ppc-linux-nat.c:
	* ppc-bdm.c:
	* parser-defs.h:
	* parse.c:
	* p-valprint.c:
	* p-typeprint.c:
	* p-lang.h:
	* p-lang.c:
	* remote-fileio.h:
	* remote-fileio.c:
	* remote-est.c:
	* remote-e7000.c:
	* regset.h:
	* regset.c:
	* reggroups.h:
	* reggroups.c:
	* regcache.h:
	* regcache.c:
	* proc-why.c:
	* proc-service.c:
	* proc-events.c:
	* printcmd.c:
	* ppcobsd-tdep.h:
	* sentinel-frame.h:
	* sentinel-frame.c:
	* scm-valprint.c:
	* scm-tags.h:
	* scm-lang.h:
	* scm-lang.c:
	* scm-exp.c:
	* s390-tdep.h:
	* rom68k-rom.c:
	* remote.h:
	* remote-utils.c:
	* remote-st.c:
	* remote-sim.c:
	* remote-sds.c:
	* remote-rdp.c:
	* remote-rdi.c:
	* remote-hms.c:
	* sim-regno.h:
	* shnbsd-tdep.h:
	* shnbsd-tdep.c:
	* shnbsd-nat.c:
	* sh-tdep.h:
	* serial.h:
	* serial.c:
	* ser-unix.h:
	* ser-unix.c:
	* ser-tcp.c:
	* ser-pipe.c:
	* ser-go32.c:
	* ser-e7kpc.c:
	* ser-base.h:
	* ser-base.c:
	* solib.c:
	* solib-svr4.h:
	* solib-svr4.c:
	* solib-sunos.c:
	* solib-som.h:
	* solib-som.c:
	* solib-pa64.h:
	* solib-pa64.c:
	* solib-osf.c:
	* solib-null.c:
	* solib-legacy.c:
	* solib-irix.c:
	* solib-frv.c:
	* solib-aix5.c:
	* sol-thread.c:
	* sparc64-linux-tdep.c:
	* sparc64-linux-nat.c:
	* sparc-tdep.h:
	* sparc-tdep.c:
	* sparc-sol2-tdep.c:
	* sparc-sol2-nat.c:
	* sparc-nat.h:
	* sparc-nat.c:
	* sparc-linux-tdep.c:
	* sparc-linux-nat.c:
	* source.h:
	* source.c:
	* somread.c:
	* solist.h:
	* solib.h:
	* std-regs.c:
	* stack.h:
	* stack.c:
	* stabsread.h:
	* sparcobsd-tdep.c:
	* sparcnbsd-tdep.c:
	* sparcnbsd-nat.c:
	* sparc64obsd-tdep.c:
	* sparc64nbsd-tdep.c:
	* sparc64nbsd-nat.c:
	* sparc64fbsd-tdep.c:
	* sparc64fbsd-nat.c:
	* sparc64-tdep.h:
	* sparc64-tdep.c:
	* sparc64-sol2-tdep.c:
	* sparc64-nat.c:
	* ui-file.c:
	* typeprint.h:
	* typeprint.c:
	* tramp-frame.h:
	* tramp-frame.c:
	* trad-frame.h:
	* trad-frame.c:
	* tracepoint.h:
	* top.c:
	* tobs.inc:
	* thread.c:
	* terminal.h:
	* target.h:
	* symfile.h:
	* stop-gdb.c:
	* vaxbsd-nat.c:
	* vax-tdep.h:
	* vax-tdep.c:
	* vax-nat.c:
	* varobj.h:
	* varobj.c:
	* value.h:
	* value.c:
	* valprint.h:
	* valprint.c:
	* v850-tdep.c:
	* uw-thread.c:
	* user-regs.c:
	* ui-out.h:
	* ui-out.c:
	* ui-file.h:
	* xcoffsolib.h:
	* xcoffsolib.c:
	* wrapper.c:
	* wince.c:
	* wince-stub.h:
	* wince-stub.c:
	* vaxobsd-tdep.c:
	* vaxnbsd-tdep.c:
	* gdb_gcore.sh:
	* copying.c:
	* configure.ac:
	* aclocal.m4:
	* acinclude.m4:
	* reply_mig_hack.awk:
	* observer.sh:
	* gdb_mbuild.sh:
	* arm-linux-tdep.c:
	* blockframe.c:
	* dbug-rom.c:
	* environ.h:
	* dwarf2loc.h:
	* gdb-events.sh:
	* glibc-tdep.h:
	* gdb_wait.h:
	* gdbthread.h:
	* i386-sol2-tdep.c:
	* hppabsd-tdep.c:
	* hppa-linux-nat.c:
	* hppa-hpux-nat.c:
	* ia64-linux-tdep.c:
	* infptrace.c:
	* linespec.h:
	* maint.c:
	* mips-mdebug-tdep.h:
	* remote-m32r-sdi.c:
	* s390-nat.c:
	* rs6000-nat.c:
	* remote-utils.h:
	* sh3-rom.c:
	* sh-linux-tdep.c:
	* top.h:
	* symtab.h:
	* symmisc.c:
	* symfile-mem.c:
	* srec.h:
	* user-regs.h:
	* version.h:
	* valarith.c:
	* xstormy16-tdep.c:
	* wrapper.h:
	* Makefile.in:
	* f-exp.y:
	* cris-tdep.c:
	* cp-name-parser.y:
	* procfs.c:
	* proc-utils.h:
	* proc-flags.c:
	* proc-api.c:
	* p-exp.y:
	* m68hc11-tdep.c:
	* m2-exp.y:
	* kod.h:
	* kod-cisco.c:
	* jv-exp.y:
	* hppa-linux-tdep.c: Add (c) after Copyright.  Update the FSF
	address.
2005-12-17 22:34:03 +00:00
Andrew Cagney 1b0ba10226 2005-05-16 Andrew Cagney <cagney@gnu.org>
* target.h (target_read_partial, target_write_partial)
	(do_xfer_memory, xfer_memory, target_read, target_write)
	(get_target_memory): For buffers, change "void*" to gdb_byte.
	(struct target_ops): Ditto for to_xfer_partial and
	deprecated_xfer_memory.
	* dcache.h (dcache_xfer_memory): Ditto.
	* target.c (default_xfer_partial, target_read_partial)
	(target_write_partial, target_read, target_write)
	(do_xfer_memory, update_current_target, get_target_memory): Update.
	(target_read_string): Change buf to a gdb_byte.
	* dcache.c (dcache_xfer_memory): Update.
	* exec.c (xfer_memory): Make buffer type to gdb_byte.
	* mem-break.c (default_memory_insert_breakpoint): Remove cast.
	* disasm.c (dis_asm_read_memory): Remove cast, use gdb_byte.
2005-05-16 04:45:43 +00:00
Andrew Cagney 5a168c78ef 2005-05-01 Andrew Cagney <cagney@gnu.org>
* gdbarch.sh (deprecated_extract_return_value)
	(breakpoint_from_pc, deprecated_store_return_value)
	(memory_insert_breakpoint, memory_remove_breakpoint): Change type
	of buffer to a bfd_byte pointer.
	* gdbarch.h, gdbarch.c: Re-generate.
	* mem-break.c (memory_insert_breakpoint)
	(memory_remove_breakpoint, default_memory_insert_breakpoint)
	(default_memory_remove_breakpoint): Update.
	* target.h (memory_insert_breakpoint)
	(memory_remove_breakpoint, default_memory_insert_breakpoint)
	(default_memory_remove_breakpoint): Update declarations.
	(struct target_ops): Update to_insert_breakpoint and
	to_remove_breakpoint.
	* target.c (debug_to_remove_breakpoint)
	(debug_to_insert_breakpoint): Update.
	* remote-m32r-sdi.c (m32r_remove_breakpoint)
	(m32r_insert_breakpoint): Update.
	* m32r-tdep.c (m32r_memory_insert_breakpoint)
	(m32r_memory_remove_breakpoint): Update.
	* remote-e7000.c (e7000_insert_breakpoint)
	(e7000_remove_breakpoint): Update.
	* remote-rdi.c (arm_rdi_insert_breakpoint)
	(arm_rdi_remove_breakpoint): Update.
	* remote-sim.c (gdbsim_insert_breakpoint)
	(gdbsim_remove_breakpoint): Update.
	* exec.c (ignore): Update.
	* rs6000-tdep.c (rs6000_extract_return_value): Update.
	* ia64-tdep.c (ia64_memory_insert_breakpoint)
	(ia64_memory_remove_breakpoint): Update.
	* remote-rdp.c (remote_rdp_insert_breakpoint)
	(remote_rdp_remove_breakpoint): Update.
2005-05-01 19:58:55 +00:00
Andrew Cagney 8a3fe4f86c 2005-02-10 Andrew Cagney <cagney@gnu.org>
Mark up all error and warning messages.
	* ada-lang.c, amd64-tdep.c, arch-utils.c, breakpoint.c: Update.
	* bsd-kvm.c, bsd-uthread.c, coff-solib.h, coffread.c: Update.
	* core-aout.c, core-regset.c, corefile.c, corelow.c: Update.
	* cp-abi.c, cp-support.c, cp-valprint.c, cris-tdep.c: Update.
	* dbxread.c, demangle.c, doublest.c, dsrec.c: Update.
	* dve3900-rom.c, dwarf2expr.c, dwarf2loc.c: Update.
	* dwarf2read.c, dwarfread.c, elfread.c, eval.c: Update.
	* event-top.c, exec.c, expprint.c, f-lang.c: Update.
	* f-typeprint.c, f-valprint.c, fbsd-nat.c, findvar.c: Update.
	* frame.c, frv-linux-tdep.c, gcore.c, gdbtypes.c: Update.
	* gnu-nat.c, gnu-v2-abi.c, gnu-v3-abi.c, go32-nat.c: Update.
	* hpacc-abi.c, hppa-hpux-nat.c, hppa-hpux-tdep.c: Update.
	* hppa-linux-nat.c, hppa-linux-tdep.c, hppa-tdep.c: Update.
	* hpread.c, hpux-thread.c, i386-linux-nat.c: Update.
	* i386-linux-tdep.c, i386-tdep.c, i386bsd-nat.c: Update.
	* i386gnu-nat.c, i387-tdep.c, ia64-linux-nat.c: Update.
	* ia64-tdep.c, inf-child.c, inf-ptrace.c, inf-ttrace.c: Update.
	* infcall.c, infcmd.c, inflow.c, infptrace.c, infrun.c: Update.
	* inftarg.c, interps.c, irix5-nat.c, jv-lang.c: Update.
	* kod-cisco.c, kod.c, language.c, libunwind-frame.c: Update.
	* linespec.c, linux-nat.c, linux-thread-db.c, m2-lang.c: Update.
	* m32r-rom.c, m68hc11-tdep.c, m68k-tdep.c: Update.
	* m68klinux-nat.c, macrocmd.c, macroexp.c, main.c: Update.
	* maint.c, mdebugread.c, mem-break.c, memattr.c: Update.
	* mips-linux-tdep.c, mips-tdep.c, mipsread.c, monitor.c: Update.
	* nlmread.c, nto-procfs.c, objc-lang.c, objfiles.c: Update.
	* observer.c, ocd.c, p-lang.c, p-typeprint.c: Update.
	* p-valprint.c, pa64solib.c, parse.c, ppc-linux-tdep.c: Update.
	* ppcnbsd-tdep.c, printcmd.c, procfs.c, remote-e7000.c: Update.
	* remote-fileio.c, remote-m32r-sdi.c, remote-rdi.c: Update.
	* remote-rdp.c, remote-sim.c, remote-st.c: Update.
	* remote-utils.c, remote-utils.h, remote.c: Update.
	* rom68k-rom.c, rs6000-nat.c, s390-tdep.c, scm-lang.c: Update.
	* ser-e7kpc.c, ser-tcp.c, ser-unix.c, sh-tdep.c: Update.
	* sh3-rom.c, shnbsd-tdep.c, sol-thread.c, solib-aix5.c: Update.
	* solib-frv.c, solib-irix.c, solib-osf.c, solib-pa64.c: Update.
	* solib-som.c, solib-sunos.c, solib-svr4.c, solib.c: Update.
	* somread.c, somsolib.c, source.c, stabsread.c: Update.
	* stack.c, std-regs.c, symfile-mem.c, symfile.c: Update.
	* symmisc.c, symtab.c, target.c, thread.c, top.c: Update.
	* tracepoint.c, trad-frame.c, typeprint.c, utils.c: Update.
	* uw-thread.c, valarith.c, valops.c, valprint.c: Update.
	* value.c, varobj.c, version.in, win32-nat.c, wince.c: Update.
	* xcoffread.c, xcoffsolib.c, cli/cli-cmds.c: Update.
	* cli/cli-decode.c, cli/cli-dump.c, cli/cli-logging.c: Update.
	* cli/cli-script.c, cli/cli-setshow.c, mi/mi-cmd-break.c: Update.
	* mi/mi-cmd-disas.c, mi/mi-cmd-env.c, mi/mi-cmd-file.c: Update.
	* mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-getopt.c: Update.
	* mi/mi-symbol-cmds.c, tui/tui-layout.c, tui/tui-stack.c: Update.
	* tui/tui-win.c: Update.
2005-02-11 04:06:14 +00:00
Andrew Cagney aaab4dba86 2003-05-15 Andrew Cagney <cagney@redhat.com>
* arch-utils.h (legacy_breakpoint_from_pc): Delete declaration.
	* target.h (memory_breakpoint_from_pc): Delete declaration.
	* mem-break.c (memory_breakpoint_from_pc): Delete function.
	* arch-utils.c (legacy_breakpoint_from_pc): Delete function.
	* monitor.c (monitor_insert_breakpoint): Use
	gdbarch_breakpoint_from_pc instead of memory_breakpoint_from_pc.
	* gdbarch.sh (BREAKPOINT_FROM_PC): Do not provide a default.
	* gdbarch.h, gdbarch.c: Re-generate.
	* sparc-tdep.c (sparc_breakpoint_from_pc): New function.
	(sparc_gdbarch_init): Set breakpoint_from_pc to
	sparc_breakpoint_from_pc.
	* config/sparc/tm-sparc.h (BREAKPOINT): Delete macro.
	(BREAKPOINT_FROM_PC): Define.
	(sparc_breakpoint_from_pc): Declare.
	* hppa-tdep.c (hppa_breakpoint_from_pc): New function.
	* config/pa/tm-hppa.h (hppa_breakpoint_from_pc): Declare.
	(BREAKPOINT_FROM_PC): Define.
	(BREAKPOINT): Delete macro.
	* target.h: Update comment.
	* s390-tdep.c (s390_gdbarch_init): Update comments.
	* remote.c: Update comments.
	* remote-mips.c: Update comments.
	* proc-api.c (write_with_trace): Do not check for a breakpoint.
	* mem-break.c: Update comment.
	* ia64-tdep.c (IA64_BREAKPOINT): Rename BREAKPOINT.
	(ia64_memory_insert_breakpoint): Update.
	* config/sparc/tm-sparc.h: Update comment.
	* config/pa/tm-hppa64.h: Update comment.
	* rs6000-tdep.c (BIG_BREAKPOINT, LITTLE_BREAKPOINT): Delete macro.
	(rs6000_breakpoint_from_pc): Update.
	* mips-tdep.c (BIG_BREAKPOINT, LITTLE_BREAKPOINT): Delete macro.
	(PMON_BIG_BREAKPOINT, PMON_LITTLE_BREAKPOINT): Delete macro.
	(IDT_LITTLE_BREAKPOINT, IDT_LITTLE_BREAKPOINT): Delete macro.
	(MIPS16_LITTLE_BREAKPOINT, MIPS16_BIG_BREAKPOINT): Delete macro.
	(mips_breakpoint_from_pc): Update.
	(mips_dump_tdep): Update.
2003-05-15 22:58:39 +00:00
Andrew Cagney f4f9705a2d * gdbarch.sh (BREAKPOINT_FROM_PC): Return a const buffer.
* gdbarch.h, gdbarch.c: Regenerate.

* defs.h (breakpoint_from_pc_fn): Delete type definition.
* target.h (memory_breakpoint_from_pc): Update declaration.
* config/mcore/tm-mcore.h (mcore_breakpoint_from_p): Ditto.

* arch-utils.c (legacy_breakpoint_from_pc): Update return type.
* mcore-tdep.c (mcore_breakpoint_from_pc): Ditto.
* mem-break.c (memory_breakpoint_from_pc): Ditto.
* rs6000-tdep.c (rs6000_breakpoint_from_pc): Ditto.
* s390-tdep.c (s390_breakpoint_from_pc): Ditto
* xstormy16-tdep.c (xstormy16_breakpoint_from_pc): Ditto.
* mn10300-tdep.c (mn10300_breakpoint_from_pc): Ditto.
* mips-tdep.c (mips_breakpoint_from_pc): Ditto.
* m68hc11-tdep.c (m68hc11_breakpoint_from_pc): Ditto.
* ia64-tdep.c (ia64_breakpoint_from_pc): Ditto.
* d10v-tdep.c (d10v_breakpoint_from_pc): Ditto.
* arch-utils.c (legacy_breakpoint_from_pc): Ditto..

* mem-break.c (default_memory_insert_breakpoint): Make `bp' a
const pointer.
* monitor.c (monitor_insert_breakpoint): Ditto.
* rs6000-tdep.c (rs6000_software_single_step): Ditto for `breakp'.

* config/mcore/tm-mcore.h: Update copyright.
* mem-break.c: Ditto.
* xstormy16-tdep.c: Ditto.
2002-04-18 18:09:09 +00:00
Andrew Cagney d7449b42d3 s/BIG_ENDIAN/BFD_ENDIAN_BIG/ 2002-01-05 04:30:46 +00:00
Kevin Buettner b6ba6518e9 Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
Kevin Buettner fba45db2fa Protoization. 2000-07-30 01:48:28 +00:00
Andrew Cagney bc1821e659 * remote.c (REMOTE_TRANSLATE_XFER_ADDRESS), mem-break.c
(MEMORY_INSERT_BREAKPOINT, MEMORY_REMOVE_BREAKPOINT), target.h
(BREAKPOINT_FROM_PC), valops.c (COERCE_FLOAT_TO_DOUBLE),
gdbarch.sh (D10V_MAKE_DADDR, D10V_MAKE_IADDR,
FRAMELESS_FUNCTION_INVOCATION, REGISTER_CONVERTIBLE,
REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW,
REGISTER_NAME), findvar.c (POINTER_TO_ADDRESS,
ADDRESS_TO_POINTER): Delete default definition.  Handled by
gdbarch.

* gdbarch.sh: Make multi-arch defaults, defaults for non-
multi-arch targets.
(REGISTER_NAME, COERCE_FLOAT_TO_DOUBLE, REGISTER_CONVERTIBLE,
REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW,
D10V_MAKE_DADDR, D10V_MAKE_IADDR, BREAKPOINT_FROM_PC,
MEMORY_INSERT_BREAKPOINT, MEMORY_REMOVE_BREAKPOINT,
REMOTE_TRANSLATE_XFER_ADDRESS, FRAMELESS_FUNCTION_INVOCATION):
Provide default/legacy implementation.
(REGISTER_NAMES, CALL_DUMMY): Allow legacy definition.
* gdbarch.h, gdbarch.c: Re-generate.
2000-04-17 02:27:37 +00:00
Jason Molenda 917317f4c6 import gdb-1999-10-18 snapshot 1999-10-19 02:47:02 +00:00
Jason Molenda c5aa993b1f import gdb-1999-07-07 post reformat 1999-07-07 20:19:36 +00:00
Stan Shebs c906108c21 Initial creation of sourceware repository 1999-04-16 01:35:26 +00:00
Stan Shebs 071ea11e85 Initial creation of sourceware repository 1999-04-16 01:34:07 +00:00
John Gilmore 7d9884b927 * defs.h: Incorporate param.h. All users changed.
* param-no-tm.h:  Change users to define TM_FILE_OVERRIDE instead.
* param.h, param-no-tm.h:  Removed.
* Update copyrights in all changed files.
* dbxread.c, dwarfread.c, inflow.c, infrun.c, m2-exp.y, putenv.c,
solib.c, symtab.h, tm-umax.h, valprint.c:  Lint.
* tm-convex.h, tm-hp300hpux.h, tm-merlin.h, tm-sparc.h,
xm-merlin.h:  Avoid host include files in target descriptions.
* getpagesize.h:  Removed, libiberty copes now.
1991-11-21 18:42:05 +00:00
K. Richard Pixley bd5635a1e2 Initial revision 1991-03-28 16:26:26 +00:00