max-page-size only matters for demand paged executables or shared
libraries, and the ideal size is the largest value used by your
operating system. Values larger than necessary just waste file space
and memory. common-page-size also affects file and memory size,
trading a possible small increase in file size for a decrease in
memory size when the operating system is using a common-page-size
page. With a powerpc max-page-size of 64k and common-page-size of 4k
many executables will use no more memory pages when the system page
size is 4k than an executable linked with -z max-page-size=0x1000,
yet will still run on a system using 64k pages. However, when running
on a system using 64k pages relro protection will not be completely
effective.
Due to the relro problem, powerpc binutils has been using a default
common-page-size of 64k since 2014-12-18 (git commit 04c6a44c7),
leading to complaints about increased file and memory sizes. People
not using relro do have a valid reason to complain..
So this patch introduces an extra back-end value to use as the default
for common-page-size when generating relro executables, and enables
the support for powerpc. Non relro executables will now be generated
with a default common-page-size of 4k.
bfd/
* elf-bfd.h (struct elf_backend_data): Add relropagesize.
* elfxx-target.h (ELF_RELROPAGESIZE): Provide default and
sanity test.
(elfNN_bed): Init relropagesize.
* bfd.c (bfd_emul_get_commonpagesize): Add boolean param to
select relropagesize.
* elf32-ppc.c (ELF_COMMONPAGESIZE): Define as 0x1000.
(ELF_RELROPAGESIZE): Define as ELF_MAXPAGESIZE.
(ELF_MINPAGESIZE): Don't define.
* elf64-ppc.c (ELF_COMMONPAGESIZE): Define as 0x1000.
(ELF_RELROPAGESIZE): Define as ELF_MAXPAGESIZE.
* bfd-in2.h: Regenerate.
ld/
* ldmain.c (main): Move config.maxpagesize and
config.commonpagesize initialization to..
* ldemul.c (after_parse_default): ..here.
* testsuite/ld-powerpc/ppc476-shared.d: Pass -z common-page-size.
* testsuite/ld-powerpc/ppc476-shared2.d: Likewise.
The default max-page-size on ppc32 has been 64k since 1995-02-15 (git
commit bcbe2c71). There was a change committed 2003-07-12 to chose a
4k page if __QNXTARGET__ is defined, but that particular commit was
from an earlier posted patch
https://sourceware.org/ml/binutils/2003-07/msg00211.html that only
made the change effective for arm, rather than the later one
https://sourceware.org/ml/binutils/2003-07/msg00220.html that also
changed powerpc and sh..
Since the __QNXTARGET__ #ifdef in elf32-ppc.c is ineffective unless
the user defines it in his or her CFLAGS, I'm removing that code.
* elf32-ppc.c (ELF_MAXPAGESIZE, ELF_COMMONPAGESIZE): Don't depend
on __QNXTARGET__ define.
This patch adds the analysis part of PLT call optimization, enabling
the code added with the previous patch that actually performs the
optimization.
Gold support is not available yet.
bfd/
* elf64-ppc.c (struct _ppc64_elf_section_data): Add has_pltcall field.
(struct ppc_link_hash_table): Add can_convert_all_inline_plt.
(ppc64_elf_check_relocs): Set has_pltcall.
(ppc64_elf_adjust_dynamic_symbol): Discard some PLT entries.
(ppc64_elf_inline_plt): New function.
(ppc64_elf_size_dynamic_sections): Discard some PLT entries for locals.
* elf64-ppc.h (ppc64_elf_inline_plt): Declare.
* elf32-ppc.c (has_pltcall): Define.
(struct ppc_elf_link_hash_table): Add can_convert_all_inline_plt.
(ppc_elf_check_relocs): Set has_pltcall.
(ppc_elf_inline_plt): New function.
(ppc_elf_adjust_dynamic_symbol): Discard some PLT entries.
(ppc_elf_size_dynamic_sections): Likewise.
* elf32-ppc.h (ppc_elf_inline_plt): Declare.
ld/
* emultempl/ppc64elf.em (no_inline_plt): New var.
(ppc_before_allocation): Call ppc64_elf_inline_plt.
(enum ppc64_opt): Add OPTION_NO_INLINE_OPT.
(PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Handle --no-inline-optimize.
* emultemps/ppc32elf.em (no_inline_opt): New var.
(prelim_size_sections): New function, extracted from..
(ppc_before_allocation): ..here. Call ppc_elf_inline_plt.
(enum ppc32_opt): Add OPTION_NO_INLINE_OPT.
(PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Handle --no-inline-optimize.
In addition to the existing relocs we need two more to mark all
instructions in the call sequence, PLTCALL on the call itself (plus
the toc restore insn for ppc64), and PLTSEQ on others. All
relocations in a particular sequence have the same symbol.
Example ppc64 ELFv2 assembly:
.reloc .,R_PPC64_PLTSEQ,puts
std 2,24(1)
addis 12,2,puts@plt@ha # .reloc .,R_PPC64_PLT16_HA,puts
ld 12,puts@plt@l(12) # .reloc .,R_PPC64_PLT16_LO_DS,puts
.reloc .,R_PPC64_PLTSEQ,puts
mtctr 12
.reloc .,R_PPC64_PLTCALL,puts
bctrl
ld 2,24(1)
Example ppc32 -fPIC assembly:
addis 12,30,puts+32768@plt@ha # .reloc .,R_PPC_PLT16_HA,puts+0x8000
lwz 12,12,puts+32768@plt@l # .reloc .,R_PPC_PLT16_LO,puts+0x8000
.reloc .,R_PPC_PLTSEQ,puts+32768
mtctr 12
.reloc .,R_PPC_PLTCALL,puts+32768
bctrl
Marking sequences like this allows the linker to convert them to nops
and a direct call if the target symbol turns out to be local.
When the call is __tls_get_addr, each relocation shown above is paired
with an R_PPC*_TLSLD or R_PPC*_TLSGD reloc to additionally mark the
sequence for possible TLS optimization. The TLSLD or TLSGD relocs are
emitted first.
include/
* elf/ppc.h (R_PPC_PLTSEQ, R_PPC_PLTCALL): Define.
* elf/ppc64.h (R_PPC64_PLTSEQ, R_PPC64_PLTCALL): Define.
bfd/
* elf32-ppc.c (ppc_elf_howto_raw): Add PLTSEQ and PLTCALL howtos.
(is_plt_seq_reloc): New function.
(ppc_elf_check_relocs): Handle PLTSEQ and PLTCALL relocs.
(ppc_elf_tls_optimize): Handle inline plt call sequence.
(ppc_elf_relax_section): Handle PLTCALL reloc.
(ppc_elf_relocate_section): Nop out inline plt call sequence when
resolving locally.
* elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_PLTSEQ and
R_PPC64_PLTCALL entries. Comment R_PPC64_TOCSAVE.
(has_tls_get_addr_call): Correct comment.
(is_branch_reloc): Add PLTCALL.
(is_plt_seq_reloc): New function.
(ppc64_elf_check_relocs): Handle PLT16_LO_DS reloc. Set
has_tls_reloc for R_PPC64_TLSGD and R_PPC64_TLSLD. Create plt
entry for R_PPC64_PLTCALL.
(ppc64_elf_tls_optimize): Handle inline plt call sequence.
(ppc_type_of_stub): Handle PLTCALL reloc.
(toc_adjusting_stub_needed): Likewise.
(ppc64_elf_relocate_section): Set "can_plt_call" for PLTCALL
reloc insn. Nop out inline plt call sequence when resolving
locally. Handle __tls_get_addr inline plt call optimization.
elfcpp/
* powerpc.h (R_POWERPC_PLTSEQ, R_POWERPC_PLTCALL): Define.
gold/
* powerpc.cc (Target_powerpc::Track_tls::maybe_skip_tls_get_addr_call):
Handle inline plt sequence relocs.
(Stub_table::Plt_stub_key::Plt_stub_key): Likewise.
(Target_powerpc::Scan::reloc_needs_plt_for_ifunc): Likewise.
(Target_powerpc::Relocate::relocate): Likewise.
Necessary if gcc is to use PLT16 relocs to implement -mlongcall, and
there isn't a good technical reason why local symbols should be
excluded from PLT16 support. Non-ifunc local symbol PLT entries go in
a separate section to other PLT entries. In a fixed position
executable they won't need to be relocated, and in a PIE or shared
library I chose to not implement lazy relocation.
bfd/
* elf64-ppc.c (LOCAL_PLT_ENTRY_SIZE): Define.
(struct ppc_stub_hash_entry): Add symtype field.
(PLT_KEEP): Define.
(struct ppc_link_hash_table): Add pltlocal and relpltlocal.
(create_linkage_sections): Create pltlocal and relpltlocal.
(ppc64_elf_check_relocs): Allow PLT relocs on local symbols.
Set PLT_KEEP.
(ppc64_elf_adjust_dynamic_symbol): Keep PLT entries for inline calls.
(allocate_dynrelocs): Allocate pltlocal and relpltlocal.
(ppc64_elf_size_dynamic_sections): Size pltlocal and relpltlocal.
Keep PLT entries for inline calls against locals.
(ppc_build_one_stub): Use pltlocal as appropriate.
(ppc_size_one_stub): Likewise.
(ppc64_elf_size_stubs): Set symtype.
(build_global_entry_stubs_and_plt): Init pltlocal and write
relpltlocal for globals.
(write_plt_relocs_for_local_syms): Likewise for local syms.
(ppc64_elf_relocate_section): Support PLT for local syms.
* elf32-ppc.c (PLT_KEEP): Define.
(struct ppc_elf_link_hash_table): Add pltlocal and relpltlocal.
(ppc_elf_create_glink): Create pltlocal and relpltlocal.
(ppc_elf_check_relocs): Allow PLT relocs on local symbols.
Set PLT_KEEP. Adjust update_local_sym_info call.
(ppc_elf_adjust_dynamic_symbol): Keep PLT entries for inline calls.
(allocate_dynrelocs): Allocate pltlocal and relpltlocal.
(ppc_elf_size_dynamic_sections): Size pltlocal and relpltlocal.
(ppc_elf_relocate_section): Support PLT16 relocs for local syms.
(write_global_sym_plt): Init pltlocal and write relpltlocal.
(ppc_finish_symbols): Likewise for locals.
ld/
* emulparams/elf32ppc.sh (OTHER_RELRO_SECTIONS_2): Add .branch_lt.
(OTHER_GOT_RELOC_SECTIONS): Add .rela.branch_lt.
* testsuite/ld-powerpc/elfv2so.d: Update for symbol/stub reordering.
* testsuite/ld-powerpc/relbrlt.d: Likewise.
* testsuite/ld-powerpc/relbrlt.s: Likewise.
* testsuite/ld-powerpc/tlsso.r: Likewise.
* testsuite/ld-powerpc/tlstocso.r: Likewise.
gold/
* powerpc.cc (Target_powerpc::lplt_): New variable.
(Target_powerpc::lplt_section): Associated accessor.
(Target_powerpc::plt_off): Handle local non-ifunc symbols.
(Target_powerpc::make_lplt_section): New function.
(Target_powerpc::make_local_plt_entry): New function.
(Powerpc_relobj::do_relocate_sections): Write out lplt.
(Output_data_plt_powerpc::first_plt_entry_offset): Zero for lplt.
(Output_data_plt_powerpc::add_local_entry): New function.
(Output_data_plt_powerpc::do_write): Ignore lplt.
(Target_powerpc::make_iplt_section): Make lplt first.
(Target_powerpc::make_brlt_section): Make .branch_lt relro.
(Target_powerpc::Scan::local): Handle PLT16 relocs.
The current scheme where we output PLT relocs for global symbols in
finish_dynamic_symbol, and PLT relocs for local symbols when
outputting stubs does not work if PLT entries are to be used for
inline PLT sequences against non-dynamic globals or local symbols.
bfd/
* elf64-ppc.c (ppc_build_one_stub): Move output of PLT relocs
for local symbols to..
(write_plt_relocs_for_local_syms): ..here. New function.
(ppc64_elf_finish_dynamic_symbol): Move output of PLT relocs for
global symbols to..
(build_global_entry_stubs_and_plt): ..here. Rename from
build_global_entry_stubs.
(ppc64_elf_build_stubs): Always call build_global_entry_stubs_and_plt.
Call write_plt_relocs_for_local_syms.
* elf32-ppc.c (get_sym_h): New function.
(ppc_elf_relax_section): Use get_sym_h.
(ppc_elf_relocate_section): Move output of PLT relocs and glink
stubs for local symbols to..
(ppc_finish_symbols): ..here. New function.
(ppc_elf_finish_dynamic_symbol): Move output of PLT relocs for
global syms to..
(write_global_sym_plt): ..here. New function.
* elf32-ppc.h (ppc_elf_modify_segment_map): Delete attribute.
(ppc_finish_symbols): Declare.
ld/
* ppc32elf.em (ppc_finish): Call ppc_finish_symbols.
The PowerPC64 ELFv2 ABI and the PowerPC SysV ABI support a number of
relocations that can be used to create and access a PLT entry.
However, the relocs are not well defined. The PLT16 family of relocs
talk about "the section offset or address of the procedure linkage
table entry". It's plain that we do need a relative address when PIC
as otherwise we'd have dynamic text relocations, but "section offset"
doesn't specify which section. The most obvious one, ".plt", isn't
that useful because there is no readily available way of addressing
the start of the ".plt" section. Much more useful would be "the
GOT/TOC-pointer relative offset of the procedure linkage table entry",
and I suppose you could argue that is a "section offset" of sorts.
For PowerPC64 it is better to use the same TOC-pointer relative
addressing even when non-PIC, since ".plt" may be located outside the
range of a 32-bit address. However, for ppc32 we do want an absolute
address when non-PIC as a GOT pointer may not be set up. Also, for
ppc32 PIC we have a similar situation to R_PPC_PLTREL24 in that the
GOT pointer is set to a location in the .got2 section and we need to
specify the .got2 offset in the PLT16 reloc addend.
This patch supports PLT16 relocations using these semantics. This is
not an ABI change for ppc32 since the relocations were not previously
supported by GNU ld, but is for ppc64 where some of the PLT16 relocs
were supported. I'm not particularly concerned since the old ppc64
PLT16 reloc semantics made them almost completely useless.
bfd/
* elf32-ppc.c (ppc_elf_check_relocs): Handle PLT16 relocs.
(ppc_elf_relocate_section): Likewise.
* elf64-ppc.c (ppc64_elf_check_relocs): Handle PLT16_LO_DS.
(ppc64_elf_relocate_section): Likewise. Correct PLT16
resolution to plt entry relative to toc pointer.
gold/
* powerpc.cc (Target_powerpc::plt_off): New functions.
(is_plt16_reloc): New function.
(Stub_table::plt_off): Use Target_powerpc::plt_off.
(Stub_table::plt_call_size): Use plt_off.
(Stub_table::do_write): Likewise.
(Target_powerpc::Scan::get_reference_flags): Return RELATIVE_REF
for PLT16 relocations.
(Target_powerpc::Scan::reloc_needs_plt_for_ifunc): Return true
for PLT16 relocations.
(Target_powerpc::Scan::global): Make a PLT entry for PLT16 relocations.
(Target_powerpc::Relocate::relocate): Support PLT16 relocations.
(Powerpc_scan_relocatable_reloc::global_strategy): Return RELOC_SPECIAL
for ppc32 plt16 relocs.
It is possible to construct indirect calls to __tls_get_addr in
assembly that confuse TLS optimization. (PowerPC gcc doesn't support
such calls, ignoring -mlongcall for __tls_get_addr.) This patch fixes
the problem by requiring a TLSLD or TLSGD marker reloc before any insn
in an indirect call to __tls_get_addr will be optimized. They also
need additional marker relocs defined in a later patch, so don't
expect the optimization to work just yet. The point here is to
prevent mis-optimization of indirect calls without any marker relocs.
The presense of a marker reloc is tracked by a new bit in the tls_mask
field of ppc_link_hash_entry and the corresponding lgot_masks unsigned
char array for local symbols. Since the field is only 8 bits, we've
run out of space. However, tracking TLS use for variables, and
tracking IFUNC for functions are independent, and bits can be reused.
TLS_TLS is always set for TLS usage, so can be used to select the
meaning of the other bits. This patch does that even for elf32-ppc.c
which hasn't yet run out of space in the field.
* elf64-ppc.c (TLS_TLS, TLS_GD, TLS_LD, TLS_TPREL, TLS_DTPREL,
TLS_TPRELGD, TLS_EXPLICIT): Renumber. Test TLS_TLS throughout
file when other TLS flags are tested in a mask.
(TLS_MARK, NON_GOT): Define.
(PLT_IFUNC): Redefine, and test TLS_TLS throughout file as well.
(update_local_sym_info): Don't create got entry when NON_GOT.
(ppc64_elf_check_relocs): Pass NON_GOT with PLT_IFUNC.
Set TLS_MARK.
(get_tls_mask): Do toc lookup if tls_mask is just TLS_MARK.
(ppc64_elf_relocate_section): Likewise.
(ppc64_elf_tls_optimize): Don't attempt to optimize indirect
__tls_get_addr calls lacking a marker reloc.
* elf32-ppc.c (TLS_TLS, TLS_GD, TLS_LD, TLS_TPREL, TLS_DTPREL,
TLS_TPRELGD): Renumber. Update comment.
(TLS_MARK, NON_GOT): Define.
(PLT_IFUNC): Redefine, and test TLS_TLS throughout file as well.
(update_local_sym_info): Don't create got entry when NON_GOT.
(ppc_elf_check_relocs): Pass NON_GOT with PLT_IFUNC.
Set TLS_MARK.
(ppc_elf_tls_optimize): Don't attempt to optimize indirect
__tls_get_addr calls lacking a marker reloc.
* elf32-ppc.c (struct ppc_elf_link_hash_entry): Make tls_mask
field unsigned.
(update_local_sym_info): Likewise for local_got_tls_masks.
(ppc_elf_tls_optimize): Likewise for lgot_masks.
The GNU coding standard says error messages should be of the form
program:sourcefile:lineno: message
or
program: message
and
"The string message should not begin with a capital letter when it
follows a program name and/or file name, because that isn’t the
beginning of a sentence. (The sentence conceptually starts at the
beginning of the line.) Also, it should not end with a period."
This patch does that for ppc, and removes some British spelling.
I've also switched some error output from using the linker callback
einfo to _bfd_error_handler, due to improved compilation time
argument checking now done for the latter function.
bfd/
* elf32-ppc.c: Standardize error/warning messages. Use
_bfd_error_handler rather than einfo when einfo features not used.
* elf64-ppc.c: Likewise.
ld/
* testsuite/ld-powerpc/attr-gnu-12-21.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-12.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-13.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-21.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-23.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-31.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-32.d: Update.
* testsuite/ld-powerpc/attr-gnu-8-23.d: Update.
This reverts most of commit 1be5d8d3bb.
Left in place are addition of --no-plt-align to some ppc32 ld tests
and the ld.texinfo --no-plt-thread-safe fix.
Asking for ppc32 plt call stubs to be aligned at 32 byte boundaries
didn't quite work. For ld.bfd they were spaced 32 bytes apart, but
only started on a 16 byte boundary. ld.gold also didn't get it right.
Finding that bug made me check over the ppc64 plt stub alignment,
where I found that negative values for alignment (meaning align to
minimize boundary crossing) were not accepted. Since no one has
complained about that, I guess I could have removed the feature from
ld.bfd documentation, but I've opted instead to correct the code.
I've also added an optional alignment paramenter for ppc32
--plt-align, for some consistency with gold and ppc64 ld.bfd.
bfd/
* elf32-ppc.c (ppc_elf_create_glink): Correct alignment of .glink.
* elf64-ppc.c (ppc64_elf_size_stubs): Handle negative plt_stub_align.
(ppc64_elf_build_stubs): Likewise.
gold/
* powerpc.cc (param_plt_align): New function supplying default
--plt-align values. Use it..
(Stub_table::plt_call_align): ..here, and..
(Output_data_glink::global_entry_align): ..here.
(Stub_table::stub_align): Correct 32-bit minimum alignment.
ld/
* emultempl/ppc32elf.em: Support optional --plt-align arg.
* emultempl/ppc64elf.em: Support negative --plt-align arg.
This is in preparation for the next patch adding Spectre variant 2
mitigation for PowerPC and PowerPC64. Besides tidying code involved
in stub output (to reduce the number of places where bctr is output),
the patch adds some user visible features:
1) PowerPC64 ELFv2 global entry stubs now are aligned under the
control of --plt-align, with a default alignment of 32 bytes.
2) PowerPC64 __glink_PLTresolve is no longer padded out with nops.
3) PowerPC32 PLT stubs are aligned under the control of --plt-align,
with the default alignment being 16 bytes as before.
4) The PowerPC32 branch/nop table emitted before __glink_PLTresolve
is now smaller in many cases. It was sized incorrectly when the
__tls_get_addr_opt stub was used, and unnecessarily included space
for local ifuncs.
bfd/
* elf32-ppc.c (GLINK_ENTRY_SIZE): Add parameters, handle
__tls_get_addr_opt, and alignment sizing.
(TLS_GET_ADDR_GLINK_SIZE): Delete.
(is_nonpic_glink_stub): Don't use GLINK_ENTRY_SIZE.
(ppc_elf_get_synthetic_symtab): Recognize stubs spaced at 4, 6,
or 8 insns.
(ppc_elf_link_hash_table_create): Init new ppc_elf_params field.
(allocate_dynrelocs): Use new GLINK_ENTRY_SIZE.
(ppc_elf_size_dynamic_sections): Likewise. Size branch table
by PLT reloc count.
(write_glink_stub): Handle __tls_get_addr_opt stub.
Pad out to size given by GLINK_ENTRY_SIZE.
(ppc_elf_relocate_section): Adjust write_glink_stub call.
(ppc_elf_finish_dynamic_symbol): Likewise.
(ppc_elf_finish_dynamic_sections): Write PLTresolve without using
insn array since so many need rewriting.
* elf32-ppc.h (struct ppc_elf_params): Add plt_stub_align.
* elf64-ppc.c (GLINK_PLTRESOLVE_SIZE): Rename from
GLINK_CALL_STUB_SIZE. Add htab param and evaluate to size without
nops. Adjust all uses.
(ppc64_elf_get_synthetic_symtab): Don't use GLINK_CALL_STUB_SIZE
in glink_vma calculation.
(struct ppc_link_hash_table): Add global_entry section pointer.
(create_linkage_sections): Create separate section for global
entry stubs.
(PPC_LO, PPC_HI, PPC_HA): Move earlier.
(size_global_entry_stubs): Handle sizing for aligned stubs.
(ppc64_elf_size_dynamic_sections): Handle global_entry alloc,
and don't stash end of glink branch table in rawsize.
(ppc_build_one_stub): Rewrite stub size calculations.
(build_global_entry_stubs): Use new section.
(ppc64_elf_build_stubs): Don't pad __glink_PLTresolve with nops.
Build lazy link stubs out to end of section. Build global entry
stubs in new section.
gold/
* options.h (plt_align): Support for PowerPC32 too.
* powerpc.cc (Stub_table::stub_align): Heed --plt-align for 32-bit.
(Stub_table::plt_call_size, branch_stub_size): Tidy.
(Stub_table::plt_call_align): Implement using stub_align.
(Output_data_glink::global_entry_align): New function.
(Output_data_glink::global_entry_off): New function.
(Output_data_glink::global_entry_address): Use global_entry_off.
(Output_data_glink::pltresolve_size): New function, replacing
pltresolve_size_ constant. Update all uses.
(Output_data_glink::add_global_entry): Align offset.
(Output_data_glink::set_final_data_size): Use global_entry_align.
(Stub_table::do_write): Don't pad __glink_PLTrelsolve with nops.
Tidy stub output. Use global_entry_off.
ld/
* emultempl/ppc32elf.em (params): Init new field.
(enum ppc32_opt): New enum to define OPTION_* values. Add
OPTION_PLT_ALIGN and OPTION_NO_PLT_ALIGN.
(PARSE_AND_LIST_LONGOPTS): Handle new options.
(PARSE_AND_LIST_ARGS_CASES): Likewise.
(PARSE_AND_LIST_OPTIONS): Likewise. Break up help output.
* emultempl/ppc64elf.em (ppc_add_stub_section): Init alignment
correctly for negative --plt-stub-align.
* testsuite/ld-powerpc/elfv2exe.d,
* testsuite/ld-powerpc/elfv2so.d,
* testsuite/ld-powerpc/relbrlt.d,
* testsuite/ld-powerpc/relbrlt.s,
* testsuite/ld-powerpc/tlsexe.d,
* testsuite/ld-powerpc/tlsexe.r,
* testsuite/ld-powerpc/tlsexe32.d,
* testsuite/ld-powerpc/tlsexe32.g,
* testsuite/ld-powerpc/tlsexe32.r,
* testsuite/ld-powerpc/tlsexetoc.d,
* testsuite/ld-powerpc/tlsexetoc.r,
* testsuite/ld-powerpc/tlsopt5_32.d,
* testsuite/ld-powerpc/tlsso.d,
* testsuite/ld-powerpc/tlstocso.d: Update for changed stub order.
Past tense is wrong for a comment before some action.
* elf32-ppc.c (ppc_elf_adjust_dynamic_symbol): Comment tidy.
* elf64-ppc.c (ppc64_elf_adjust_dynamic_symbol): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_adjust_dynamic_symbol): Likewise.
In early October, HJ Lu added support for a number of targets to "Dump
dynamic relocation in read-only section with minfo". This extends
that support to more targets, displays the symbol involved, and splits
the existing function that sets TEXTREL into a "readonly_dynrelocs"
and "maybe_set_textrel" function. I'll need "readonly_dynrelocs" if I
ever get around to fixing "pr22374 function pointer initialization"
fails.
am33_2.0, arc, bfin, hppa64, mn10300, and nios2 fail to mark a binary
needing text relocations with DT_TEXTREL. That's not good. xtensa also
fails to do so but complains about "dangerous relocation: dynamic
relocation in read-only section" so I reckon that is fine and have
marked the test as an xfail. The other targets need maintainer
attention.
Curiously, the map file dump wasn't added for x86, so the map test
currently fail on x86. It also fails on alpha, am33_2.0, arc, bfin,
hppa64, ia64, m68k, mips, mn10300, nios2, score and vax. cris
complains with "tmpdir/textrel.o, section .rodata: relocation
R_CRIS_32 should not be used in a shared object; recompile with -fPIC"
so I've marked it as an xfail.
bfd/
* elf32-hppa.c (maybe_set_textrel): Print symbol for map file output.
* elf32-ppc.c (maybe_set_textrel): Likewise.
* elf64-ppc.c (maybe_set_textrel): Likewise.
* elf32-arm.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing..
(elf32_arm_readonly_dynrelocs): ..this.
* elf32-lm32.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-m32r.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-metag.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-nds32.c: Delete unnecessary forward declarations.
(readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-or1k.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-s390.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-sh.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-tic6x.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing..
(elf32_tic6x_readonly_dynrelocs): ..this.
* elf32-tilepro.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf64-s390.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elfnn-aarch64.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing..
(aarch64_readonly_readonly_dynrelocs): ..this.
* elfnn-riscv.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elfxx-sparc.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elfxx-tilegx.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
ld/
* testsuite/ld-elf/shared.exp: Run new textrel tests.
* testsuite/ld-elf/textrel.map: New file.
* testsuite/ld-elf/textrel.rd: New file.
* testsuite/ld-elf/textrel.s: New file.
* testsuite/ld-elf/textrel.warn: New file.
This cleans up yet more craziness with non_got_ref.
PR 22533
* elf32-hppa.c (elf32_hppa_copy_indirect_symbol): Don't do anything
special with non_got_ref for weak aliases.
(elf32_hppa_check_relocs): Tweak setting of non_got_ref.
(elf32_hppa_adjust_dynamic_symbol): When initialising weak aliases,
don't uselessly copy non_got_ref. Clear dyn_relocs instead if
strong symbol is allocated in dynbss. Tidy comments.
(elf32_hppa_relocate_section): Comment fix.
* elf32-ppc.c (ppc_elf_copy_indirect_symbol): Don't do anything
special with non_got_ref for weak aliases.
(ppc_elf_adjust_dynamic_symbol): When initialising weak aliases,
don't uselessly copy non_got_ref. Clear dyn_relocs instead if
strong symbol is allocated in dynbss. Tidy comments.
* elf64-ppc.c (ppc64_elf_copy_indirect_symbol): Don't do anything
special with non_got_ref for weak aliases.
(ppc64_elf_adjust_dynamic_symbol): When initialising weak aliases,
don't uselessly copy non_got_ref. Clear dyn_relocs instead if
strong symbol is allocated in dynbss. Tidy comments.
I did this for powerpc64 a while ago. Not moving weak symbol
dyn_relocs to the strong alias makes for a much simpler test for
dynamic relocs in relocate_section.
This patch implements the change for powerpc and hppa. Other targets
could benefit from similar changes.
* elf32-hppa.c (pc_dynrelocs): Define.
(elf32_hppa_copy_indirect_symbol): Don't copy dyn_relocs to weakdefs.
(alias_readonly_dynrelocs): New function.
(elf32_hppa_adjust_dynamic_symbol): Don't clear non_got_ref to
indicate dyn_relocs should be discarded, discard them here.
Use alias_readonly_dynrelocs.
(allocate_dynrelocs): Don't test or clear non_got_ref.
(elf32_hppa_relocate_section): Simplify test for dynamic relocs.
* elf32-ppc.c (ppc_elf_copy_indirect_symbol): Don't copy dyn_relocs
to weakdefs.
(alias_readonly_dynrelocs, pc_dynrelocs): New functions.
(ppc_elf_adjust_dynamic_symbol): Don't clear non_got_ref to
indicate dyn_relocs should be discarded, discard them here.
Use alias_readonly_dynrelocs.
(allocate_dynrelocs): Don't test or clear non_got_ref.
(ppc_elf_relocate_section): Simplify test for dynamic relocs.
This makes the elf_link_hash_entry weakdef field, currently used to
point from a weak symbol to a strong alias, a circular list so that
all aliases can be found from any of them. A new flag, is_weakalias,
distinguishes the weak symbol from a strong alias, and is used in all
places where we currently test u.weakdef != NULL.
With the original u.weakdef handling it was possible to have two or
more weak symbols pointing via u.weakdef to a strong definition.
Obviously that situation can't map to a circular list; One or more of
the weak symbols must point at another weak alias rather than the
strong definition. To handle that, I've added an accessor function to
return the strong definition.
* elf-bfd.h (struct elf_link_hash_entry): Add is_weakalias.
Rename u.weakdef to u.alias and update comment.
(weakdef): New static inline function.
* elflink.c (bfd_elf_record_link_assignment) Test is_weakalias
rather than u.weakdef != NULL, and use weakdef function.
(_bfd_elf_adjust_dynamic_symbol): Likewise.
(_bfd_elf_fix_symbol_flags): Likewise. Clear is_weakalias on
all aliases if def has been overridden in a regular object, not
u.weakdef.
(elf_link_add_object_symbols): Delete new_weakdef flag. Test
is_weakalias and use weakdef. Set is_weakalias and circular
u.alias. Update comments.
(_bfd_elf_gc_mark_rsec): Test is_weakalias rather than
u.weakdef != NULL and use weakdef function.
* elf-m10300.c (_bfd_mn10300_elf_adjust_dynamic_symbol): Test
is_weakalias rather than u.weakdef != NULL and use weakdef
function. Assert that def is strong defined.
* elf32-arc.c (elf_arc_adjust_dynamic_symbol): Likewise.
* elf32-arm.c (elf32_arm_adjust_dynamic_symbol): Likewise.
* elf32-bfin.c (elf32_bfinfdpic_adjust_dynamic_symbol): Likewise.
(bfin_adjust_dynamic_symbol): Likewise.
* elf32-cr16.c (_bfd_cr16_elf_adjust_dynamic_symbol): Likewise.
* elf32-cris.c (elf_cris_adjust_dynamic_symbol): Likewise.
* elf32-frv.c (elf32_frvfdpic_adjust_dynamic_symbol): Likewise.
* elf32-hppa.c (elf32_hppa_adjust_dynamic_symbol): Likewise.
* elf32-i370.c (i370_elf_adjust_dynamic_symbol): Likewise.
* elf32-lm32.c (lm32_elf_adjust_dynamic_symbol): Likewise.
* elf32-m32r.c (m32r_elf_adjust_dynamic_symbol): Likewise.
* elf32-m68k.c (elf_m68k_adjust_dynamic_symbol): Likewise.
* elf32-metag.c (elf_metag_adjust_dynamic_symbol): Likewise.
* elf32-microblaze.c (microblaze_elf_adjust_dynamic_symbol): Likewise.
* elf32-nds32.c (nds32_elf_adjust_dynamic_symbol): Likewise.
* elf32-nios2.c (nios2_elf32_adjust_dynamic_symbol): Likewise.
* elf32-or1k.c (or1k_elf_adjust_dynamic_symbol): Likewise.
* elf32-ppc.c (ppc_elf_adjust_dynamic_symbol): Likewise.
* elf32-s390.c (elf_s390_adjust_dynamic_symbol): Likewise.
* elf32-score.c (s3_bfd_score_elf_adjust_dynamic_symbol): Likewise.
* elf32-score7.c (s7_bfd_score_elf_adjust_dynamic_symbol): Likewise.
* elf32-sh.c (sh_elf_adjust_dynamic_symbol): Likewise.
* elf32-tic6x.c (elf32_tic6x_adjust_dynamic_symbol): Likewise.
* elf32-tilepro.c (tilepro_elf_gc_mark_hook): Likewise.
(tilepro_elf_adjust_dynamic_symbol): Likewise.
* elf32-vax.c (elf_vax_adjust_dynamic_symbol): Likewise.
* elf32-xtensa.c (elf_xtensa_adjust_dynamic_symbol): Likewise.
* elf64-alpha.c (elf64_alpha_adjust_dynamic_symbol): Likewise.
* elf64-hppa.c (elf64_hppa_adjust_dynamic_symbol): Likewise.
* elf64-ia64-vms.c (elf64_ia64_adjust_dynamic_symbol): Likewise.
* elf64-ppc.c (ppc64_elf_gc_mark_hook): Likewise.
(ppc64_elf_adjust_dynamic_symbol): Likewise.
* elf64-s390.c (elf_s390_adjust_dynamic_symbol): Likewise.
* elf64-sh64.c (sh64_elf64_adjust_dynamic_symbol): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_adjust_dynamic_symbol): Likewise.
* elfnn-ia64.c (elfNN_ia64_adjust_dynamic_symbol): Likewise.
* elfnn-riscv.c (riscv_elf_adjust_dynamic_symbol): Likewise.
* elfxx-mips.c (_bfd_mips_elf_adjust_dynamic_symbol): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_gc_mark_hook): Likewise.
(_bfd_sparc_elf_adjust_dynamic_symbol): Likewise.
* elfxx-tilegx.c (tilegx_elf_gc_mark_hook): Likewise.
(tilegx_elf_adjust_dynamic_symbol): Likewise.
* elfxx-x86.c (_bfd_x86_elf_adjust_dynamic_symbol): Likewise.
This patch was aimed at a FIXME in elf32-hppa.c, the ludicrous and
confusing fact that non_got_ref after adjust_dynamic_relocs in that
backend means precisely the inverse of what it means before
adjust_dynamic_relocs. Before, when non_got_ref is set it means there
are dynamic relocs, after, if non_got_ref is clear it means "keep
dynamic relocs" and later, "has dynamic relocs". There is a reason
why it was done that way.. Some symbols that may have dynamic
relocations pre-allocated in check_relocs turn out to not be dynamic,
and then are not seen by the backend adjust_dynamic_symbols. We want
those symbols to lose their dynamic relocs when non-pic, so it's handy
that non_got_ref means the opposite after adjust_dynamic_relocs. But
it's really confusing.
Most other targets, like ppc32, don't always set non_got_ref on
non-GOT references that have dynamic relocations. This is because the
primary purpose of non_got_ref before adjust_dynamic_relocs is to flag
symbols that might need to be copied to .dynbss, and there are
relocation types that may require dyn_relocs but clearly cannot have
symbols copied into .dynbss, for example, TLS relocations.
Why do we need a flag after adjust_dynamic_relocs to say "keep
dynamic relocations"? Well, you can discard most unwanted dyn_relocs
in the backend adjust_dynamic_relocs, and for those symbols that
aren't seen by the backend adjust_dynamic_relocs, in
allocate_dynrelocs based on a flag set by adjust_dynamic relocs,
dynamic_adjusted. That doesn't solve all our difficulties though.
relocate_section needs to know whether a symbol has dyn_relocs, and
many targets transfer dyn_relocs to a weakdef if the symbol has one.
The transfer means relocate_section can't test dyn_relocs itself and
the weakdef field has been overwritten by that time. So non_got_ref
is used to flag "this symbol has dynamic relocations" for
relocate_section.
Confused still? Well, let's hope the comments I've added help clarify
things.. The patch also fixes a case where we might wrongly emit
dynamic relocations in an executable for common and undefined symbols.
* elf32-hppa.c (elf32_hppa_adjust_dynamic_symbol): Set non_got_ref
to keep dyn_relocs, clear to discard. Comment.
(allocate_dynrelocs): Always clear non_got_ref when clearing
dyn_relocs in non-pic case. Invert non_got_ref test. Also test
dynamic_adjusted and ELF_COMMON_DEF_P. Move code deleting
dyn_relocs on undefined syms to handle for non-pic too.
(elf32_hppa_relocate_section): Simplify test for non-pic dyn relocs.
* elf32-ppc.c (ppc_elf_adjust_dynamic_symbol): Set non_got_ref
to keep dyn_relocs, clear to discard. Comment.
(allocate_dynrelocs): Always clear non_got_ref when clearing
dyn_relocs in non-pic case. Invert non_got_ref test. Also test
dynamic_adjusted and ELF_COMMON_DEF_P. Move code deleting
dyn_relocs on undefined syms to handle for non-pic too.
(ppc_elf_relocate_section): Simplify test for non-pic dyn relocs.
* elf64-ppc.c (ppc64_elf_adjust_dynamic_symbol): Discard
dyn_relocs here. Don't bother setting non_got_ref. Comment.
(allocate_dynrelocs): Delete special handling of non-pic ELFv2
ifuncs. Move code deleting dyn_relocs on undefined symbols to
handle for non-pic too. Don't test non_got_ref. Do test
dynamic_adjusted and ELF_COMMON_DEF_P.
This patch removes unnecessary GOT IE TLS relocations in PIEs. Useful
with --no-tls-optimize, or with an enormous TLS segment. With the
default --tls-optimize in effect IE code sequences will be edited to
LE under the same circumstances we can remove the GOT reloc.
* elf32-ppc.c (got_entries_needed, got_relocs_needed): New functions.
(allocate_dynrelocs, ppc_elf_size_dynamic_sections): Use them here.
(ppc_elf_relocate_section): Don't output a dynamic relocation
for IE GOT entries in an executable.
* elf64-ppc.c (allocate_got): Trim unnecessary TPREL relocs.
(ppc64_elf_size_dynamic_sections): Likewise.
(ppc64_elf_relocate_section): Likewise.
PowerPC64 lacked the mapfile textrel warning on finding dynamic relocs
in read-only sections. This patch adds it, and tidies the
readonly_dynrelocs interface. PowerPC doesn't need a SEC_ALLOC test
because !SEC_ALLOC sections are excluded by check_relocs so will never
have dyn_relocs.
* elf32-ppc.c (readonly_dynrelocs): Delete info param. Update all
callers. Don't bother with SEC_ALLOC test. Return section pointer.
Move minfo call to..
(maybe_set_textrel): ..here.
* elf64-ppc.c (readonly_dynrelocs): Return section pointer.
(maybe_set_textrel): Call minfo to print textrel warning to map file.
We don't need a PLT entry when function pointer initialization in a
read/write section is the only reference to a given function symbol.
This patch prevents the unnecessary PLT entry, and ensures no dynamic
relocs are emitted when UNDEFWEAK_NO_DYNAMIC_RELOC says so.
bfd/
PR 22374
* elf32-ppc.c (ppc_elf_adjust_dynamic_symbol): Don't create a plt
entry when just a dynamic reloc can serve. Ensure no dynamic
relocations when UNDEFWEAK_NO_DYNAMIC_RELOC by setting non_got_ref.
Expand and move the non_got_ref comment.
* elf64-ppc.c (ppc64_elf_adjust_dynamic_symbol): Likewise.
ld/
* testsuite/ld-powerpc/ambiguousv2.d: Remove FIXME.
polyml produces object files with the wrong OS/ABI for hppa-linux.
This, along with the fact that elf32-hppa.c is using the strictest
backend relocs_compatible, results in wrong merging of ELF symbols.
So, remove the relocs_compatible check in _bfd_elf_merge_symbol.
_bfd_elf_merge_symbol is only called nowadays from within blocks
protected by is_elf_hash_table, so "we are doing an ELF link" as the
removed comment says, is true.
Also relax relocs_compatible for hppa and powerpc. relocs_compatible
is used for more than just merging symbols, as the name suggests.
This allows objects that are in fact reasonably compatible to be
linked.
PR 22300
* elflink.c (_bfd_elf_merge_symbol): Remove relocs_compatible check.
* elf32-hppa.c (elf_backend_relocs_compatible): Define.
* elf32-ppc.c (elf_backend_relocs_compatible): Define.
* elf64-ppc.c (elf_backend_relocs_compatible): Define.
Move UNDEFWEAK_NO_DYNAMIC_RELOC to elf-bfd.h so that it can be used by
other ELF linker backends.
* elf32-ppc.c (UNDEFWEAK_NO_DYNAMIC_RELOC): Moved to ...
* elf-bfd.h (UNDEFWEAK_NO_DYNAMIC_RELOC): Here.
* elf64-ppc.c (UNDEFWEAK_NO_DYNAMIC_RELOC): Removed.
Fix commit 70a38d42c5 ("New entry points for writing Linux NT_PRPSINFO
notes."), <https://sourceware.org/ml/binutils/2013-02/msg00023.html>,
and commit b3ac9c7756 ("Put more info in NT_PRPSINFO Linux notes"),
<https://sourceware.org/ml/binutils/2013-02/msg00024.html>, and handle
both variants of the 32-bit Linux core PRPSINFO note across all targets.
The 32-bit Linux core PRPSINFO note matches the 32-bit kernel structure,
defined as follows:
(gdb) ptype struct elf_prpsinfo
type = struct elf_prpsinfo {
char pr_state;
char pr_sname;
char pr_zomb;
char pr_nice;
unsigned long pr_flag;
__kernel_uid_t pr_uid;
__kernel_gid_t pr_gid;
pid_t pr_pid;
pid_t pr_ppid;
pid_t pr_pgrp;
pid_t pr_sid;
char pr_fname[16];
char pr_psargs[80];
}
(gdb)
where the individual data types of most members are the same across all
32-bit Linux ports, with the exception of `__kernel_uid_t' and
`__kernel_gid_t'. These are defined in <asm-generic/posix_types.h> as
32-bit `unsigned int' by default, however overridden as 16-bit `unsigned
short' in port-specific <asm/posix_types.h> for a few targets, mostly
earlier ports of Linux, specifically: ARM, CRIS, FR-V, M32R, m68k,
MN10300/AM33, s390, SuperH, SPARC and i386.
The default is the same as the PowerPC variant already handled, as from
the commits referred. Make the special PowerPC case generic then,
removing the GDB part, and provide a backend flag to switch between the
two cases possible, with the 32-bit one being the default and the 16-bit
one explicitly selected. Set the flag in the target backends affected.
bfd/
* elf-bfd.h (elf_backend_data): Add `linux_prpsinfo32_ugid16'
member.
(elfcore_write_ppc_linux_prpsinfo32): Remove prototype.
* elf32-ppc.c (elfcore_write_ppc_linux_prpsinfo32): Remove.
(elf_external_ppc_linux_prpsinfo32)
(swap_ppc_linux_prpsinfo32_out): Move to...
* elf-linux-core.h (elf_external_linux_prpsinfo32_ugid32)
(swap_linux_prpsinfo32_ugid32_out): ... these.
(elf_external_linux_prpsinfo32): Rename to...
(elf_external_linux_prpsinfo32_ugid16): ... this.
(swap_linux_prpsinfo32_out): Rename to...
(swap_linux_prpsinfo32_ugid16_out): ... this.
* elfxx-target.h [!elf_backend_linux_prpsinfo32_ugid16]
(elf_backend_linux_prpsinfo32_ugid16): Define.
(elfNN_bed): Initialize `linux_prpsinfo32_ugid16' member.
* elf.c (elfcore_write_linux_prpsinfo32): Handle both variants
of the 32-bit Linux core PRPSINFO note.
* elf32-am33lin.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-arm.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-cris.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-frv.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-i386.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-m32r.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-m68k.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-s390.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-sh.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-sparc.c (elf_backend_linux_prpsinfo32_ugid16): Define.
gdb/
* ppc-linux-tdep.c (ppc_linux_init_abi): Remove call to
`set_gdbarch_elfcore_write_linux_prpsinfo'.
Dump dynamic relocation info to the map file when generating dynamic
relocation in read-only section relocations if -Map is used.
* elf32-ppc.c (readonly_dynrelocs): Add a link_info argument.
Dump dynamic relocation in read-only section with minfo if
needed.
(ppc_elf_adjust_dynamic_symbol): Pass NULL to readonly_dynrelocs.
(maybe_set_textrel): Likewise.
(ppc_elf_size_dynamic_sections): Dump dynamic relocation in
read-only section with minfo.
In the TLS GD/LD to LE optimization, ld replaces a sequence like
addi 3,2,x@got@tlsgd R_PPC64_GOT_TLSGD16 x
bl __tls_get_addr(x@tlsgd) R_PPC64_TLSGD x
R_PPC64_REL24 __tls_get_addr
nop
with
addis 3,13,x@tprel@ha R_PPC64_TPREL16_HA x
addi 3,3,x@tprel@l R_PPC64_TPREL16_LO x
nop
When the tprel offset is small, this can be further optimized to
nop
addi 3,13,x@tprel
nop
bfd/
* elf64-ppc.c (struct ppc_link_hash_table): Add do_tls_opt.
(ppc64_elf_tls_optimize): Set it.
(ppc64_elf_relocate_section): Nop addis on TPREL16_HA, and convert
insn on TPREL16_LO and TPREL16_LO_DS relocs to use r13 when
addis would add zero.
* elf32-ppc.c (struct ppc_elf_link_hash_table): Add do_tls_opt.
(ppc_elf_tls_optimize): Set it.
(ppc_elf_relocate_section): Nop addis on TPREL16_HA, and convert
insn on TPREL16_LO relocs to use r2 when addis would add zero.
gold/
* powerpc.cc (Target_powerpc::Relocate::relocate): Nop addis on
TPREL16_HA, and convert insn on TPREL16_LO and TPREL16_LO_DS
relocs to use r2/r13 when addis would add zero.
ld/
* testsuite/ld-powerpc/tls.s: Add calls with tls markers.
* testsuite/ld-powerpc/tls32.s: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Run tls marker tests.
* testsuite/ld-powerpc/tls.d: Adjust for TPREL16_HA/LO optimization.
* testsuite/ld-powerpc/tlsexe.d: Likewise.
* testsuite/ld-powerpc/tlsexetoc.d: Likewise.
* testsuite/ld-powerpc/tlsld.d: Likewise.
* testsuite/ld-powerpc/tlsmark.d: Likewise.
* testsuite/ld-powerpc/tlsopt4.d: Likewise.
* testsuite/ld-powerpc/tlstoc.d: Likewise.
Tidy how these are handled in PIEs.
* elf32-ppc.c (must_be_dyn_reloc): Use bfd_link_dll. Comment.
(ppc_elf_check_relocs): Only set DF_STATIC_TLS in shared libs.
(ppc_elf_relocate_section): Comment fix.
* elf64-ppc.c (must_be_dyn_reloc): Use bfd_link_dll. Comment.
(ppc64_elf_check_relocs): Only set DF_STATIC_TLS in shared libs.
Support dynamic relocs for TPREL16 when non-pic too.
(dec_dynrel_count): Adjust TPREL16 handling as per check_relocs.
(ppc64_elf_relocate_section): Support dynamic relocs for TPREL16
when non-pic too.
..if they have dynamic relocs. An undefined symbol in a PIC object
that finds no definition ought to become dynamic in order to support
--allow-shlib-undefined, but there is nothing in the generic ELF
linker code to do this if the reference isn't via the GOT or PLT. (An
initialized function pointer is an example.) So it falls to backend
code to ensure the symbol is made dynamic.
PR 21988
* elf64-ppc.c (ensure_undef_dynamic): Rename from
ensure_undefweak_dynamic. Handle undefined too.
* elf32-ppc.c (ensure_undef_dynamic): Likewise.
* elf32-hppa.c (ensure_undef_dynamic): Likewise.
(allocate_dynrelocs): Discard undefined non-default visibility
relocs first. Make undefined syms dynamic. Tidy goto.
My 2017-01-24 patch (commit f0158f44) wrongly applied an optimization
of GOT entries for the __tls_get_addr_opt stub, to shared libraries.
When the TLS segment layout is known, as it is for the executable and
shared libraries loaded at initial program start, powerpc supports a
__tls_get_addr optimization. On the first call to __tls_get_addr for
a given __tls_index GOT entry, the DTPMOD word is set to zero and the
DTPREL word to the thread pointer offset to the thread variable. This
allows the __tls_get_addr_opt stub to return that value immediately
without making a call into glibc for any subsequent __tls_get_addr
calls using that __tls_index GOT entry.
That's all fine, but I thought I'd be clever and when the thread
variable is local, set up the GOT entry as if __tls_get_addr had
already been called. Which is good only for the executable, since ld
cannot know the TLS layout for shared libraries.
Of course, if this only applies to executables there isn't much point
to the optimization. Normally, GD and LD code in an executable will
be converted to IE or LE, losing the __tls_get_addr call. So the only
time it will trigger is with --no-tls-optimize. Thus, revert all
support.
* elf64-ppc.c (ppc64_elf_relocate_section): Don't optimize
__tls_index GOT entries when using __tls_get_addr_opt stub.
* elf32-ppc.c (ppc_elf_relocate_section): Likewise.
This patch fixes a number of cases where -z nodynamic-undefined-weak
was not effective in preventing dynamic relocations or linkage stubs.
* elf32-ppc.c (UNDEFWEAK_NO_DYNAMIC_RELOC): Define.
(ppc_elf_select_plt_layout, ppc_elf_tls_setup): Use it.
(ppc_elf_adjust_dynamic_symbol, allocate_dynrelocs): Likewise.
(ppc_elf_relocate_section): Likewise. Delete silly optimisation
for undef and undefweak dyn_relocs.
* elf64-ppc.c (UNDEFWEAK_NO_DYNAMIC_RELOC): Define.
(ppc64_elf_adjust_dynamic_symbol, ppc64_elf_tls_setup): Use it.
(allocate_got, allocate_dynrelocs): Likewise.
(ppc64_elf_relocate_section): Likewise.
Alan Modra
Nick Clifton
H.J. Lu
Maciej W. Rozycki
Alexander Fedotov-B55613
Yuri Chornovian