Say the program is stopped at a breakpoint, and the user sets a
watchpoint. When the program is next resumed, GDB will first step
over the breakpoint, as explained in the manual:
@value {GDBN} normally ignores breakpoints when it resumes
execution, until at least one instruction has been executed. If it
it did not do this, you would be unable to proceed past a breakpoint
without first disabling the breakpoint. This rule applies whether
or not the breakpoint already existed when your program stopped.
However, GDB currently also removes watchpoints, catchpoints, etc.,
and that means that the first instruction off the breakpoint does not
trigger the watchpoint, catchpoint, etc.
testsuite/gdb.base/watchpoint.exp has a kfail for this.
The PR proposes installing watchpoints only when stepping over a
breakpoint, but that misses catchpoints, etc.
A better fix would instead work from the opposite direction -- remove
only real breakpoints, leaving all other kinds of breakpoints
inserted.
But, going further, it's really a waste to constantly remove/insert
all breakpoints when stepping over a single breakpoint (generating a
pair of RSP z/Z packets for each breakpoint), so the fix goes a step
further and makes GDB remove _only_ the breakpoint being stepped over,
leaving all others installed. This then has the added benefit of
reducing breakpoint-related RSP traffic substancialy when there are
many breakpoints set.
gdb/
2014-03-20 Pedro Alves <palves@redhat.com>
PR breakpoints/7143
* breakpoint.c (should_be_inserted): Don't insert breakpoints that
are being stepped over.
(breakpoint_address_match): Make extern.
* breakpoint.h (breakpoint_address_match): New declaration.
* inferior.h (stepping_past_instruction_at): New declaration.
* infrun.c (struct step_over_info): New type.
(step_over_info): New global.
(set_step_over_info, clear_step_over_info)
(stepping_past_instruction_at): New functions.
(handle_inferior_event): Clear the step-over info when
trap_expected is cleared.
(resume): Remove now stale comment.
(clear_proceed_status): Clear step-over info.
(proceed): Adjust step-over handling to set or clear the step-over
info instead of removing all breakpoints.
(handle_signal_stop): When setting up a thread-hop, don't remove
breakpoints here.
(stop_stepping): Clear step-over info.
(keep_going): Adjust step-over handling to set or clear step-over
info and then always inserting breakpoints, instead of removing
all breakpoints when stepping over one.
gdb/testsuite/
2014-03-20 Pedro Alves <palves@redhat.com>
PR breakpoints/7143
* gdb.base/watchpoint.exp: Mention bugzilla bug number instead of
old gnats gdb/38. Remove kfail. Adjust to use gdb_test instead
of gdb_test_multiple.
* gdb.cp/annota2.exp: Remove kfail for gdb/38.
* gdb.cp/annota3.exp: Remove kfail for gdb/38.
This patch is to remove parameter optional_p as it is always true,
in order to simplify get_tracepoint_by_number.
'optional_p' was added by this change,
1999-11-18 Tom Tromey <tromey@cygnus.com>
* tracepoint.h (get_tracepoint_by_number): Updated
declaration.
* tracepoint.c (trace_pass_command): Better error message.
Fixed logic when `all' not specified.
(get_tracepoint_by_number): Added `optional_p' argument. Fixed
all callers.
but after this patch,
FYI: remove `static's from cli-utils.c
https://sourceware.org/ml/gdb-patches/2011-03/msg00636.html
'optional_p' passed to get_tracepoint_by_number become always true.
gdb:
2014-03-06 Yao Qi <yao@codesourcery.com>
* breakpoint.c (get_tracepoint_by_number): Remove argument
optional_p. All callers updated. Adjust comments. Update
output message.
* breakpoint.h (get_tracepoint_by_number): Update declaration.
This changes the probes to be independent of the program space.
After this, when a probe's address is needed, it is determined by
applying offsets at the point of use.
This introduces a bound_probe object, similar to bound minimal
symbols. Objects of this type are used when it's necessary to pass a
probe and its corresponding objfile.
This removes the backlink from probe to objfile, which was primarily
used to fetch the architecture to use.
This adds a get_probe_address function which calls a probe method to
compute the probe's relocated address. Similarly, it adds an objfile
parameter to the semaphore methods so they can do the relocation
properly as well.
2014-03-03 Tom Tromey <tromey@redhat.com>
* break-catch-throw.c (fetch_probe_arguments): Use bound probes.
* breakpoint.c (create_longjmp_master_breakpoint): Use
get_probe_address.
(add_location_to_breakpoint, bkpt_probe_insert_location)
(bkpt_probe_remove_location): Update.
* breakpoint.h (struct bp_location) <probe>: Now a bound_probe.
* elfread.c (elf_symfile_relocate_probe): Remove.
(elf_probe_fns): Update.
(insert_exception_resume_breakpoint): Change type of "probe"
parameter to bound_probe.
(check_exception_resume): Update.
* objfiles.c (objfile_relocate1): Don't relocate probes.
* probe.c (bound_probe_s): New typedef.
(parse_probes): Use get_probe_address. Set sal's objfile.
(find_probe_by_pc): Return a bound_probe.
(collect_probes): Return a VEC(bound_probe_s).
(compare_probes): Update.
(gen_ui_out_table_header_info): Change type of "probes"
parameter. Update.
(info_probes_for_ops): Update.
(get_probe_address): New function.
(probe_safe_evaluate_at_pc): Update.
* probe.h (struct probe_ops) <get_probe_address>: New field.
<set_semaphore, clear_semaphore>: Add objfile parameter.
(struct probe) <objfile>: Remove field.
<arch>: New field.
<address>: Update comment.
(struct bound_probe): New.
(find_probe_by_pc): Return a bound_probe.
(get_probe_address): Declare.
* solib-svr4.c (struct probe_and_action) <address>: New field.
(hash_probe_and_action, equal_probe_and_action): Update.
(register_solib_event_probe): Add address parameter.
(solib_event_probe_at): Update.
(svr4_create_probe_breakpoints): Add objfile parameter. Use
get_probe_address.
* stap-probe.c (struct stap_probe) <sem_addr>: Update comment.
(stap_get_probe_address): New function.
(stap_can_evaluate_probe_arguments, compute_probe_arg)
(compile_probe_arg): Update.
(stap_set_semaphore, stap_clear_semaphore): Compute semaphore's
address.
(handle_stap_probe): Don't relocate the probe.
(stap_relocate): Remove.
(stap_gen_info_probes_table_values): Update.
(stap_probe_ops): Remove stap_relocate.
* symfile-debug.c (debug_sym_relocate_probe): Remove.
(debug_sym_probe_fns): Update.
* symfile.h (struct sym_probe_fns) <sym_relocate_probe>: Remove.
* symtab.c (init_sal): Use memset.
* symtab.h (struct symtab_and_line) <objfile>: New field.
* tracepoint.c (start_tracing, stop_tracing): Update.
* breakpoint.h (gdbpy_breakpoint_object): Renamed from
breakpoint_object. All uses updated.
* python/python-internal.h (gdbpy_breakpoint_object): Renamed from
breakpoint_object. All uses updated.
* python.c (*): All uses of breakpoint_object updated.
* python.h (*): All uses of breakpoint_object updated.
* python/py-breakpoint.c (*): All uses of breakpoint_object updated.
* python/py-finishbreakpoint.c (*): Ditto.
After the previous patch, there's actually no breakpoint type that
returns BPSTAT_SIGNAL_HIDE, so we can go back to having
bpstat_explains_signal return a boolean. The signal hiding actually
disappears.
gdb/
2013-11-14 Pedro Alves <palves@redhat.com>
* break-catch-sig.c (signal_catchpoint_explains_signal): Adjust to
return a boolean.
* breakpoint.c (bpstat_explains_signal): Adjust to return a
boolean.
(explains_signal_watchpoint, base_breakpoint_explains_signal):
Adjust to return a boolean.
* breakpoint.h (enum bpstat_signal_value): Delete.
(struct breakpoint_ops) <explains_signal>: New returns a boolean.
(bpstat_explains_signal): Likewise.
* infrun.c (handle_inferior_event) <random signal checks>:
bpstat_explains_signal now returns a boolean - adjust. No longer
consider hiding signals.
This patch introduces two new GDB/MI commands implementing the equivalent
of the "catch exception" and "catch assert" GDB/CLI commands.
gdb/ChangeLog:
* breakpoint.h (init_ada_exception_breakpoint): Add parameter
"enabled".
* breakpoint.c (init_ada_exception_breakpoint): Add parameter
"enabled". Set B->ENABLE_STATE accordingly.
* ada-lang.h (ada_exception_catchpoint_kind): Move here from
ada-lang.c.
(create_ada_exception_catchpoint): Add declaration.
* ada-lang.c (ada_exception_catchpoint_kind): Move to ada-lang.h.
(create_ada_exception_catchpoint): Make non-static. Add new
parameter "disabled". Use it in call to
init_ada_exception_breakpoint.
(catch_ada_exception_command): Add parameter "enabled" in call
to create_ada_exception_catchpoint.
(catch_assert_command): Likewise.
* mi/mi-cmds.h (mi_cmd_catch_assert, mi_cmd_catch_exception):
Add declarations.
* mi/mi-cmds.c (mi_cmds): Add the "catch-assert" and
"catch-exception" commands.
* mi/mi-cmd-catch.c: Add #include "ada-lang.h".
(mi_cmd_catch_assert, mi_cmd_catch_exception): New functions.
This fixes PR cli/15603.
The bug here is that when a software watchpoint is being used, gdb
will stop responding to C-c. This is a regression caused by the
"catch signal" patch.
The problem is that software watchpoints always end up on the bpstat
list. However, this makes bpstat_explains_signal return
BPSTAT_SIGNAL_HIDE, causing infrun to think that the signal is not a
"random signal".
The fix is to change bpstat_explains_signal to handle this better. I
chose to do it in a "clean API" way, by passing the signal value to
bpstat_explains_signal and then adding an explains_signal method for
watchpoints, which handles the specifics.
Built and regtested on x86-64 Fedora 18.
New test case included.
* break-catch-sig.c (signal_catchpoint_explains_signal): Add 'sig'
argument.
* breakpoint.c (bpstat_explains_signal): Add 'sig' argument.
Special case signals other than GDB_SIGNAL_TRAP.
(explains_signal_watchpoint): New function.
(base_breakpoint_explains_signal): Add 'sig' argument.
(initialize_breakpoint_ops): Set 'explains_signal' method for
watchpoints.
* breakpoint.h (struct breakpoint_ops) <explains_signal>: Add
signal argument.
(bpstat_explains_signal): Likewise.
* infrun.c (handle_syscall_event, handle_inferior_event): Update.
* gdb.base/random-signal.c: New file.
* gdb.base/random-signal.exp: New file.
* breakpoint.h (handle_solib_event): Moved function declaration
to solib.h.
* breakpoint.c (handle_solib_event): Moved function to solib.c.
(bpstat_stop_status): Pass new argument to handle_solib_event.
* solib.h (update_solib_breakpoints): New function declaration.
(handle_solib_event): Moved function declaration from
breakpoint.h.
* solib.c (update_solib_breakpoints): New function.
(handle_solib_event): Moved function from breakpoint.c.
Updated to call solib_ops->handle_event if not NULL.
* solist.h (target_so_ops): New fields "update_breakpoints" and
"handle_event".
* infrun.c (set_stop_on_solib_events): New function.
(_initialize_infrun): Use the above for "set
stop-on-solib-events".
(handle_inferior_event): Pass new argument to handle_solib_event.
* solib-svr4.c (probe.h): New include.
(svr4_free_library_list): New forward declaration.
(probe_action): New enum.
(probe_info): New struct.
(probe_info): New static variable.
(NUM_PROBES): New definition.
(svr4_info): New fields "using_xfer", "probes_table" and
"solib_list".
(free_probes_table): New function.
(free_solib_list): New function.
(svr4_pspace_data_cleanup): Free probes table and solib list.
(svr4_copy_library_list): New function.
(svr4_current_sos_via_xfer_libraries): New parameter "annex".
(svr4_read_so_list): New parameter "prev_lm".
(svr4_current_sos_direct): Renamed from "svr4_current_sos".
(svr4_current_sos): New function.
(probe_and_action): New struct.
(hash_probe_and_action): New function.
(equal_probe_and_action): Likewise.
(register_solib_event_probe): Likewise.
(solib_event_probe_at): Likewise.
(solib_event_probe_action): Likewise.
(solist_update_full): Likewise.
(solist_update_incremental): Likewise.
(disable_probes_interface_cleanup): Likewise.
(svr4_handle_solib_event): Likewise.
(svr4_update_solib_event_breakpoint): Likewise.
(svr4_update_solib_event_breakpoints): Likewise.
(svr4_create_solib_event_breakpoints): Likewise.
(enable_break): Free probes table before creating breakpoints.
Use svr4_create_solib_event_breakpoints to create breakpoints.
(svr4_solib_create_inferior_hook): Free the solib list.
(_initialize_svr4_solib): Initialise
svr4_so_ops.handle_solib_event and svr4_so_ops.update_breakpoints.
If !PARSE_CONDITION_AND_THREAD, then ARG is just the location, nothing
else. The fact that the describing comment of create_breakpoint
doesn't mention this just looks like an oversight of when extra_string
was added. "parse_condition_and_thread" has been a misnomer ever
since extra_string was added -- better rename it avoid more confusion.
This makes it "parse_arg", as that'll remain stable even if/when more
explicit parameters are added.
gdb/
2013-04-08 Pedro Alves <palves@redhat.com>
Keith Seitz <keiths@redhat.com>
* breakpoint.c (create_breakpoint): Rename
"parse_condition_and_thread" parameter to "parse_arg". Update
describing comment. If !PARSE_ARG, then error out if ARG is not
the empty string after extracting the location.
* breakpoint.h (create_breakpoint): Rename
"parse_condition_and_thread" parameter to "parse_arg".
gdb/testsuite/
2013-04-08 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-break.exp (test_error): Add tests with garbage after
the location.
Code cleanup.
* breakpoint.c (print_breakpoint_location): Replace bp_location field
source_file references by symtab field references. Remove variables
sal and fullname.
(momentary_breakpoint_from_master, add_location_to_breakpoint):
(clear_command, say_where): Replace bp_location field source_file
references by symtab field references.
(bp_location_dtor): Remove the source_file reference.
(update_static_tracepoint): Replace bp_location field source_file
references by symtab field references.
(breakpoint_free_objfile): New function.
* breakpoint.h (struct bp_location): Extend the comment for line_number.
Replace the field source_file by field symtab, extend its comment.
(breakpoint_free_objfile): New declaration.
* objfiles.c (free_objfile): Call breakpoint_free_objfile.
* tui/tui-winsource.c (tui_update_breakpoint_info): Replace bp_location
field source_file references by symtab field references.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
They are equivalent to "catch load" and "catch unload" from CLI.
Rationale: GUIs might be interested in catching solib load or
unload events.
2012-11-16 Mircea Gherzan <mircea.gherzan@intel.com>
* Makefile.in (SUBDIR_MI_OBS): Add mi-cmd-catch.o.
(SUBDIR_MI_SRCS): Add mi/mi-cmd-catch.c.
* breakpoint.c (add_solib_catchpoint): New function that
can be used by both CLI and MI, factored out from
catch_load_or_unload.
(catch_load_or_unload): Strip it down and make it use the
new add_solib_catchpoint.
* breakpoint.h (add_solib_catchpoint): Declare it.
* mi/mi-cmd-break.h: New file.
* mi/mi-cmd-break.c: Include mi-cmd-break.h.
(setup_breakpoint_reporting): New function used for both
catchpoints and breakpoints.
(mi_cmd_break_insert): Use setup_breakpoint_reporting.
* mi/mi-cmd-catch.c: New file.
* mi/mi-cmds.c (mi_cmds): Add the handlers for -catch-load
and -catch-unload.
* mi/mi-cmds.h: Declare the handlers for -catch-load and
-catch-unload.
Before this change, detach_breakpoints would take a pid, and then
set inferior_ptid to a ptid that it constructs using pid_to_ptid (pid).
Unfortunately, this ptid is not necessarily valid. Consider for
instance the case of ia64-hpux, where ttrace refuses a register-read
operation if the LWP is not provided.
This problems shows up when GDB is trying to handle fork events.
Assuming GDB is configured to follow the parent, GDB will try to
detach from the child. But before doing so, it needs to remove
all breakpoints inside that child. On ia64, this involves reading
inferior (the child's) memory. And on ia64-hpux, reading memory
requires us to read the bsp and bspstore registers, in order to
determine where that memory is relative to the value of those
registers, and thus to determine which ttrace operation to use in
order to fetch that memory (see ia64_hpux_xfer_memory).
This patch therefore changes detach_breakpoints to take a ptid instead
of a pid, and then updates all callers.
One of the consequences of this patch is that it trips an assert
on GNU/Linux targets. But this assert appears to have not actual
purpose, and is thus removed.
gdb/ChangeLog:
* breakpoint.h (detach_breakpoints): pid parameter is now a ptid.
* breakpoint.c (detach_breakpoints): Change pid parameter into
a ptid. Adjust code accordingly.
* infrun.c (handle_inferior_event): Delete variable child_pid.
Update call to detach_breakpoints to pass the child ptid for
fork events.
* linux-nat.c (linux_nat_iterate_watchpoint_lwps): Remove
assert that inferior_ptid's lwp is zero.
(linux_handle_extended_wait): Update call to detach_breakpoints.
* inf-ttrace.c (inf_ttrace_follow_fork): Update call to
detach_breakpoints.
Remove stale dummy frames.
* breakpoint.c: Include dummy-frame.h.
(longjmp_breakpoint_ops): New variable.
(update_breakpoints_after_exec, breakpoint_init_inferior): Delete also
bp_longjmp_call_dummy.
(bpstat_what, bptype_string, print_one_breakpoint_location)
(init_bp_location): Support bp_longjmp_call_dummy.
(set_longjmp_breakpoint): Use longjmp_breakpoint_ops. Comment why.
(set_longjmp_breakpoint_for_call_dummy)
(check_longjmp_breakpoint_for_call_dummy, longjmp_bkpt_dtor): New
functions.
(initialize_breakpoint_ops): Initialize longjmp_breakpoint_ops.
* breakpoint.h (enum bptype): New item bp_longjmp_call_dummy. Delete
FIXME comment and extend the other comment for bp_call_dummy.
(set_longjmp_breakpoint_for_call_dummy)
(check_longjmp_breakpoint_for_call_dummy): New declarations.
* dummy-frame.c: Include gdbthread.h.
(pop_dummy_frame_bpt): New function.
(pop_dummy_frame): Call pop_dummy_frame_bpt.
(dummy_frame_discard): New function.
(cleanup_dummy_frames): Update the comment about longjmps.
* dummy-frame.h (dummy_frame_discard): New declaration.
* gdbthread.h (struct thread_info): Extend initiating_frame comment.
* infcall.c (call_function_by_hand): New variable longjmp_b. Call
set_longjmp_breakpoint_for_call_dummy. Chain its breakpoints with BPT.
* infrun.c (handle_inferior_event) <BPSTAT_WHAT_CLEAR_LONGJMP_RESUME>:
Add case 4 comment. Call check_longjmp_breakpoint_for_call_dummy and
keep_going if IS_LONGJMP and there is no other reason to stop.
gdb/testsuite/
Remove stale dummy frames.
* gdb.base/call-signal-resume.exp (maintenance print dummy-frames)
(maintenance info breakpoints): New tests.
* gdb.base/stale-infcall.c: New file.
* gdb.base/stale-infcall.exp: New file.
* breakpoint.h: Include command.h.
(add_catch_command): Use completer_ftype.
* cli/cli-decode.c (set_cmd_completer): Use completer_ftype.
* cli/cli-decode.h (struct cmd_list_element) <completer>:
Use completer_ftype.
* command.h (completer_ftype): New typedef.
(set_cmd_completer): Use it.
* python/py-cmd.c (struct cmdpy_completer) <completer>: Use
completer_ftype.
* breakpoint.h (bp_location): Add related_address member.
* inferior.h (get_return_value): Take a pointer to struct value
instead of struct type for the function requested.
* value.h (using_struct_return): Likewise.
* gdbarch.sh (return_value): Take a pointer to struct value
instead of struct type for the function requested.
* breakpoint.c (set_breakpoint_location_function): Initialize
related_address for bp_gnu_ifunc_resolver breakpoints.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the
requested function's address to gdbarch_return_value.
* eval.c (evaluate_subexp_standard): Pass the requested
function's address to using_struct_return.
* infcall.c (call_function_by_hand): Pass the requested
function's address to using_struct_return and
gdbarch_return_value.
* infcmd.c (get_return_value): Take a pointer to struct value
instead of struct type for the function requested.
(print_return_value): Update accordingly.
(finish_command_continuation): Likewise.
* stack.c (return_command): Pass the requested function's
address to using_struct_return and gdbarch_return_value.
* value.c (using_struct_return): Take a pointer to struct value
instead of struct type for the function requested. Pass the
requested function's address to gdbarch_return_value.
* python/py-finishbreakpoint.c (finish_breakpoint_object):
New function_value member, replacing function_type.
(bpfinishpy_dealloc): Update accordingly.
(bpfinishpy_pre_stop_hook): Likewise.
(bpfinishpy_init): Likewise. Record the requested function's
address.
* mips-tdep.c (mips_fval_reg): New enum.
(mips_o32_push_dummy_call): For MIPS16 FP doubles do not swap
words put in GP registers.
(mips_o64_push_dummy_call): Update a comment.
(mips_o32_return_value): Take a pointer to struct value instead
of struct type for the function requested and use it to check if
using the MIPS16 calling convention. Return the designated
general purpose registers for floating-point values returned in
MIPS16 mode.
(mips_o64_return_value): Likewise.
* ppc-tdep.h (ppc_sysv_abi_return_value): Update prototype.
(ppc_sysv_abi_broken_return_value): Likewise.
(ppc64_sysv_abi_return_value): Likewise.
* alpha-tdep.c (alpha_return_value): Take a pointer to struct
value instead of struct type for the function requested.
* amd64-tdep.c (amd64_return_value): Likewise.
* amd64-windows-tdep.c (amd64_windows_return_value): Likewise.
* arm-tdep.c (arm_return_value): Likewise.
* avr-tdep.c (avr_return_value): Likewise.
* bfin-tdep.c (bfin_return_value): Likewise.
* cris-tdep.c (cris_return_value): Likewise.
* frv-tdep.c (frv_return_value): Likewise.
* h8300-tdep.c (h8300_return_value): Likewise.
(h8300h_return_value): Likewise.
* hppa-tdep.c (hppa32_return_value): Likewise.
(hppa64_return_value): Likewise.
* i386-tdep.c (i386_return_value): Likewise.
* ia64-tdep.c (ia64_return_value): Likewise.
* iq2000-tdep.c (iq2000_return_value): Likewise.
* lm32-tdep.c (lm32_return_value): Likewise.
* m32c-tdep.c (m32c_return_value): Likewise.
* m32r-tdep.c (m32r_return_value): Likewise.
* m68hc11-tdep.c (m68hc11_return_value): Likewise.
* m68k-tdep.c (m68k_return_value): Likewise.
(m68k_svr4_return_value): Likewise.
* m88k-tdep.c (m88k_return_value): Likewise.
* mep-tdep.c (mep_return_value): Likewise.
* microblaze-tdep.c (microblaze_return_value): Likewise.
* mn10300-tdep.c (mn10300_return_value): Likewise.
* moxie-tdep.c (moxie_return_value): Likewise.
* mt-tdep.c (mt_return_value): Likewise.
* ppc-linux-tdep.c (ppc_linux_return_value): Likewise.
* ppc-sysv-tdep.c (ppc_sysv_abi_return_value): Likewise.
(ppc_sysv_abi_broken_return_value): Likewise.
(ppc64_sysv_abi_return_value): Likewise.
* ppcnbsd-tdep.c (ppcnbsd_return_value): Likewise.
* rl78-tdep.c (rl78_return_value): Likewise.
* rs6000-aix-tdep.c (rs6000_return_value): Likewise.
* rx-tdep.c (rx_return_value): Likewise.
* s390-tdep.c (s390_return_value): Likewise.
* score-tdep.c (score_return_value): Likewise.
* sh-tdep.c (sh_return_value_nofpu): Likewise.
(sh_return_value_fpu): Likewise.
* sh64-tdep.c (sh64_return_value): Likewise.
* sparc-tdep.c (sparc32_return_value): Likewise.
* sparc64-tdep.c (sparc64_return_value): Likewise.
* spu-tdep.c (spu_return_value): Likewise.
* tic6x-tdep.c (tic6x_return_value): Likewise.
* v850-tdep.c (v850_return_value): Likewise.
* vax-tdep.c (vax_return_value): Likewise.
* xstormy16-tdep.c (xstormy16_return_value): Likewise.
* xtensa-tdep.c (xtensa_return_value): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
gdb/testsuite/
* gdb.base/return-nodebug.exp: Also test float and double types.
Revert this patch to allow breakpoint always-inserted
in record target.
2011-12-05 Pedro Alves <pedro@codesourcery.com>
* breakpoint.c: Include record.h.
(breakpoints_always_inserted_mode): Return false when the record
target is in use.
* breakpoint.c (iterate_over_bp_locations): New.
* breakpoint.h: Declare.
New typedef walk_bp_location_callback.
* record.c (record_open): Call record_init_record_breakpoints.
(record_sync_record_breakpoints): New.
(record_init_record_breakpoints): New.
* NEWS: Mention supporting breakpoint always-inserted mode in
record target.
Pedro Alves <palves@redhat.com>
PR breakpoints/13776:
* breakpoint.c (breakpoint_init_inferior): Delete step-resume
breakpoints.
(delete_longjmp_breakpoint_at_next_stop): New.
* breakpoint.h (delete_longjmp_breakpoint_at_next_stop): Declare.
* target.c (generic_mourn_inferior): Call mark_breakpoints_out
before deleting the inferior. Add comments.
* thread.c (clear_thread_inferior_resources): Don't delete lonjmp
breakpoints immediately, but only on next stop. Move that code
next to where we mark other breakpoints for deletion.
* remote.c (remote_supports_cond_breakpoints): New forward
declaration.
(remote_add_target_side_condition): New function.
(remote_insert_breakpoint): Add target-side breakpoint
conditional if supported.
(remote_insert_hw_breakpoint): Likewise.
(init_remote_ops): Set to_supports_evaluation_of_breakpoint_conditions
hook.
* target.c (update_current_target): Inherit
to_supports_evaluation_of_breakpoint_conditions.
Default to_supports_evaluation_of_breakpoint_conditions to return_zero.
* target.h (struct target_ops)
<to_supports_evaluation_of_breakpoint_conditions>: New field.
(target_supports_evaluation_of_breakpoint_conditions): New #define.
* breakpoint.c (get_first_locp_gte_addr): New forward declaration.
(condition_evaluation_both, condition_evaluation_auto,
condition_evaluation_host, condition_evaluation_target,
condition_evaluation_enums, condition_evaluation_mode_1,
condition_evaluation_mode): New static globals.
(translate_condition_evaluation_mode): New function.
(breakpoint_condition_evaluation_mode): New function.
(gdb_evaluates_breakpoint_condition_p): New function.
(ALL_BP_LOCATIONS_AT_ADDR): New helper macro.
(mark_breakpoint_modified): New function.
(mark_breakpoint_location_modified): New function.
(set_condition_evaluation_mode): New function.
(show_condition_evaluation_mode): New function.
(bp_location_compare_addrs): New function.
(get_first_location_gte_addr): New helper function.
(set_breakpoint_condition): Free condition bytecode if locations
has become unconditional. Call mark_breakpoint_modified (...).
(condition_command): Call update_global_location_list (1) for
breakpoints.
(breakpoint_xfer_memory): Use is_breakpoint (...).
(is_breakpoint): New function.
(parse_cond_to_aexpr): New function.
(build_target_condition_list): New function.
(insert_bp_location): Handle target-side conditional
breakpoints and call build_target_condition_list (...).
(update_inserted_breakpoint_locations): New function.
(insert_breakpoint_locations): Handle target-side conditional
breakpoints.
(bpstat_check_breakpoint_conditions): Add comment.
(bp_condition_evaluator): New function.
(bp_location_condition_evaluator): New function.
(print_breakpoint_location): Print information on where the condition
will be evaluated.
(print_one_breakpoint_location): Likewise.
(init_bp_location): Call mark_breakpoint_location_modified (...) for
breakpoint location.
(force_breakpoint_reinsertion): New functions.
(update_global_location_list): Handle target-side breakpoint
conditions.
Reinsert locations that are already inserted if conditions have
changed.
(bp_location_dtor): Free agent expression bytecode.
(disable_breakpoint): Call mark_breakpoint_modified (...).
Call update_global_location_list (...) with parameter 1 for breakpoints.
(disable_command): Call mark_breakpoint_location_modified (...).
Call update_global_location_list (...) with parameter 1 for breakpoints.
(enable_breakpoint_disp): Call mark_breakpoint_modified (...).
(enable_command): mark_breakpoint_location_modified (...).
(_initialize_breakpoint): Update documentation and add
condition-evaluation breakpoint subcommand.
* breakpoint.h: Include ax.h.
(condition_list): New data structure.
(condition_status): New enum.
(bp_target_info) <cond_list>: New field.
(bp_location) <condition_changed, cond_bytecode>: New fields.
(is_breakpoint): New prototype.
* solib.c (update_solib_list): Update the program space's
added_solibs and deleted_solibs fields.
* progspace.h (struct program_space) <added_solibs,
deleted_solibs>: New fields.
(clear_program_space_solib_cache): Declare.
* progspace.c (release_program_space): Call
clear_program_space_solib_cache.
(clear_program_space_solib_cache): New function.
* infrun.c (handle_inferior_event) <TARGET_WAITKIND_LOADED>: Call
bpstat_stop_status. Use handle_solib_event.
* breakpoint.c: Include gdb_regex.h.
(print_solib_event): New function.
(bpstat_print): Use print_solib_event.
(bpstat_stop_status): Add special case for bp_shlib_event.
(handle_solib_event): New function.
(bpstat_what): Use handle_solib_event.
(struct solib_catchpoint): New.
(dtor_catch_solib, insert_catch_solib, remove_catch_solib)
(breakpoint_hit_catch_solib, check_status_catch_solib)
(print_it_catch_solib, print_one_catch_solib)
(print_mention_catch_solib, print_recreate_catch_solib): New
functions.
(catch_solib_breakpoint_ops): New global.
(catch_load_or_unload, catch_load_command_1)
(catch_unload_command_1): New functions.
(internal_bkpt_check_status): Add special case for
bp_shlib_event.
(internal_bkpt_print_it): Use print_solib_event.
(initialize_breakpoint_ops): Initialize
catch_solib_breakpoint_ops.
(_initialize_breakpoint): Register "catch load" and "catch
unload".
* breakpoint.h (handle_solib_event): Declare.
* NEWS: Add entry for "catch load" and "catch unload".
gdb/doc
* gdb.texinfo (Set Catchpoints): Document "catch load" and "catch
unload".
(Files): Mention new catch commands.
(GDB/MI Async Records): Likewise.
gdb/testsuite
* lib/mi-support.exp (mi_expect_stop): Add special case for
solib-event.
* gdb.base/catch-load-so.c: New file.
* gdb.base/catch-load.exp: New file.
* gdb.base/catch-load.c: New file.
* gdb.base/break-interp.exp (reach_1): Update regexp.
* breakpoint.c (create_sals_from_address_default): New function.
(create_breakpoints_sal_default): Likewise.
(decode_linespec_default): Likewise.
(is_marker_spec): Removed.
(strace_marker_p): New function.
(init_breakpoint_sal): Using `strace_marker_p' instead of
`is_marker_spec'.
(create_breakpoint): Call method `create_sals_from_address' from
breakpoint_ops, replacing code that created SALs conditionally
on the type of the breakpoint. Call method `create_breakpoints_sal',
replacing code that created breakpoints conditionally on the type
wanted.
(base_breakpoint_create_sals_from_address): New function.
(base_breakpoint_create_breakpoints_sal): Likewise.
(base_breakpoint_decode_linespec): Likewise.
(base_breakpoint_ops): Add methods
`base_breakpoint_create_sals_from_address',
`base_breakpoint_create_breakpoints_sal' and
`base_breakpoint_decode_linespec'.
(bkpt_create_sals_from_address): New function.
(bkpt_create_breakpoints_sal): Likewise.
(bkpt_decode_linespec): Likewise.
(tracepoint_create_sals_from_address): Likewise.
(tracepoint_create_breakpoints_sal): Likewise.
(tracepoint_decode_linespec): Likewise.
(strace_marker_create_sals_from_address): Likewise.
(strace_marker_create_breakpoints_sal): Likewise.
(strace_marker_decode_linespec): Likewise.
(strace_marker_breakpoint_ops): New variable.
(addr_string_to_sals): Remove `marker_spec'. Call method
`decode_linespec' from breakpoint_ops, replacing code that decoded
an address string into a SAL. Use `strace_marker_p' instead of
`marker_spec'.
(strace_command): Decide whether we are dealing with a static
tracepoint with marker or not. Use the appropriate breakpoint_ops.
(initialize_breakpoint_ops): Initialize new fields of breakpoint_ops.
* breakpoint.h (linespec_result, linespec_sals): New forward
declarations.
(breakpoint_ops) <create_sals_from_address>,
<create_breakpoints_sal>, <decode_linespec>: New methods.
* Makefile.in (SUBDIR_PYTHON_OBS): Add py-finishbreakpoint.o.
(SUBDIR_PYTHON_SRCS): Add python/py-finishbreakpoint.c.
Add build rule for this file.
* infcmd.c (print_return_value): Split to create get_return_value.
(get_return_value): New function based on print_return_value. Handle
case where stop_registers are not set.
* inferior.h (get_return_value): New prototype.
* python/py-breakpoint.c (bppy_pending_object): Make non-static.
(gdbpy_breakpoint_created): Set is_py_finish_bp is necessary.
(struct breakpoint_object): Move to python-internal.h
(BPPY_REQUIRE_VALID): Likewise.
(BPPY_SET_REQUIRE_VALID): Likewise.
(gdbpy_breakpoint_created): Initialize is_finish_bp.
(gdbpy_should_stop): Add pre/post hooks before/after calling stop
method.
* python/python-internal.h (breakpoint_object_type): Add as extern.
(bppy_pending_object): Likewise.
(typedef struct breakpoint_object) Removed.
(struct breakpoint_object): Moved from py-breakpoint.c.
Add field is_finish_bp.
(BPPY_REQUIRE_VALID): Moved from py-breakpoint.c.
(BPPY_SET_REQUIRE_VALID): Likewise.
(frame_object_to_frame_info): New prototype.
(gdbpy_initialize_finishbreakpoints): New prototype.
(bpfinishpy_is_finish_bp): Likewise.
(bpfinishpy_pre_stop_hook): Likewise.
(bpfinishpy_post_stop_hook): Likewise.
* python/py-finishbreakpoint.c: New file.
* python/py-frame.c(frame_object_to_frame_info): Make non-static and
accept PyObject instead of frame_object.
(frapy_is_valid): Don't cast to frame_object.
(frapy_name): Likewise.
(frapy_type): Likewise.
(frapy_unwind_stop_reason): Likewise.
(frapy_pc): Likewise.
(frapy_block): Likewise.
(frapy_function): Likewise.
(frapy_older): Likewise.
(frapy_newer): Likewise.
(frapy_find_sal): Likewise.
(frapy_read_var): Likewise.
(frapy_select): Likewise.
* python/python.c (gdbpy_is_stopped_at_finish_bp): New noop function.
(_initialize_python): Add gdbpy_initialize_finishbreakpoints.
* python/python.h: Include breakpoint.h
(gdbpy_is_stopped_at_finish_bp): New prototype.
doc/
* gdb.texinfo (Finish Breakpoints in Python): New subsection.
(Python API): Add menu entry for Finish Breakpoints.
testsuite/
* Makefile.in (EXECUTABLES): Add py-finish-breakpoint and
py-finish-breakpoint2
(MISCALLANEOUS): Add py-events-shlib.so and py-events-shlib-nodebug.so
* gdb.python/py-breakpoint.exp (mult_line): Define and use variable
instead of line number.
* gdb.python/py-finish-breakpoint.c: New file.
* gdb.python/py-finish-breakpoint.exp: New file.
* gdb.python/py-finish-breakpoint.py: New file.
* gdb.python/py-finish-breakpoint2.cc: New file.
* gdb.python/py-finish-breakpoint2.exp: New file.
* gdb.python/py-finish-breakpoint2.py: New file.
* breakpoint.h (struct tracepoint): New field traceframe_usage.
* breakpoint.c (print_one_breakpoint_location): Identify
tracepoints as such when reporting hit counts, report
trace buffer usage.
(create_tracepoint_from_upload): Copy status info.
* tracepoint.h (struct trace_status): Rename error_desc to stop_desc,
add fields user_name, notes, start_time, stop_time.
(struct uploaded_tp): Add fields hit_count, traceframe_usage.
* tracepoint.c (trace_user): New global.
(trace_notes): New global.
(trace_stop_notes): New global.
(start_tracing): Add argument and trace note handling.
(stop_tracing): Ditto.
(trace_start_command): Add notes argument.
(trace_stop_command): Ditto.
(trace_status_command): Report additional status info.
(trace_status_mi): Similarly.
(trace_save): Update, record tracepoint status.
(set_disconnected_tracing): Call target method directly.
(send_disconnected_tracing_value): Remove.
(set_trace_user): New function.
(set_trace_notes): New function.
(set_trace_stop_notes): New function.
(parse_trace_status): Handle additional status.
(parse_tracepoint_status): New function.
(parse_tracepoint_definition): Call it.
(tfile_get_tracepoint_status): New function.
(init_tfile_ops): Use it.
(_initialize_tracepoint): Add new setshows.
* target.h (struct target_ops): New methods to_get_tracepoint_status
and to_set_trace_notes.
(target_get_tracepoint_status): New macro.
(target_set_trace_notes): New macro.
* target.c (update_current_target): Add new methods.
* remote.c (remote_get_tracepoint_status): New function.
(remote_set_trace_notes): New function.
(init_remote_ops): Add them.
* mi/mi-main.c (mi_cmd_trace_start): Add argument to call.
(mi_cmd_trace_stop): Ditto.
* tracepoint.c (struct tracepoint): New field traceframe_usage.
(tracing_start_time): New global.
(tracing_stop_time): New global.
(tracing_user_name): New global.
(tracing_notes): New global.
(tracing_stop_note): New global.
(cmd_qtstart): Set traceframe_usage, start_time.
(stop_tracing): Set stop_time.
(cmd_qtstatus): Report additional status.
(cmd_qtp): New function.
(handle_tracepoint_query): Call it.
(cmd_qtnotes): New function.
(handle_tracepoint_general_set): Call it.
(get_timestamp): Rename from tsv_get_timestamp.
* gdb.texinfo (Starting and Stopping Trace Experiments): Document
note-related options and variables.
(Tracepoint Packets): Document packet changes.
* gdb.trace/tstatus.exp: New.
* gdb.trace/actions.c: Include string.h.
* breakpoint.h (pc_at_non_inline_function): Declare.
* breakpoint.c (is_non_inline_function,
pc_at_non_inline_function): New functions.
* infrun.c (handle_inferior_event): Don't call skip_inline_frames
if the stop is at a location where functions cannot be inlined.
No functionality change.
* breakpoint.c (bpstat_clear_actions): Remove the BS parameter, make
function comment a reference, new variables tp and bs, move here code
from throw_exception.
* breakpoint.h (bpstat_clear_actions): Remove the BS parameter,
describe it in the comment.
* exceptions.c (throw_exception): Remove variable tp, move the code for
bpstat_clear_actions to bpstat_clear_actions.
Code cleanup.
* breakpoint.c (bpstat_clear_actions): Remove clearing of commands_left.
(command_line_is_silent): New function.
(bpstat_do_actions_1): No longer use commands_left, use
command_line_is_silent for commands.
(bpstat_alloc): Remove clearing of commands_left.
(bpstat_stop_status): Remove initialization of commands_left, use
command_line_is_silent.
* breakpoint.h (struct bpstats): Remove commands_left.
Implement most breakpoint_ops methods for all breakpoint types,
and move the default handlings to the proper callbacks.
gdb/
* breakpoint.c (update_watchpoint): Always call the breakpoint's
works_in_software_mode method.
(insert_bp_location): Go through breakpoint_ops->insert_location
for software and hardware watchpoints.
(create_internal_breakpoint): Pass bkpt_breakpoint_ops as
breakpoint_ops.
(remove_breakpoint_1): Go through breakpoint_ops->remove_location
for software and hardware watchpoints.
(print_it_typical): Delete.
(print_bp_stop_message): Always call the breakpoint_ops->print_it
method.
(watchpoint_check): Adjust comment.
(bpstat_check_location): Simply always call the breakpoint's
breakpoint_hit method.
(bpstat_stop_status): Always call the breakpoint's check_status
method. Remove special cases for watchpoints and internal event
breakpoints from here (moved to the check_status implementations).
(print_one_breakpoint_location): Assume b->ops is never NULL.
Remove static tracepoint marker id printing from here (moved to
the print_one_detail callback implementation of tracepoints).
(init_bp_location): Assert OPS is never NULL.
(allocate_bp_location): Always call the breakpoint's
allocate_location method, and remove the default code from here.
(free_bp_location): Always call the location's dtor method, and
remove the default code from here.
(init_raw_breakpoint_without_location): Assert OPS is never NULL.
(set_raw_breakpoint_without_location): Add new breakpoint_ops
parameter. Pass it down.
(set_raw_breakpoint): Ditto.
(print_it_catch_fork): Adjust to take a bpstat as argument.
(catch_fork_breakpoint_ops): Install methods.
(print_it_catch_vfork): Adjust to take a bpstat as argument.
(catch_vfork_breakpoint_ops): Install methods.
(dtor_catch_syscall): Call the base dtor.
(print_it_catch_syscall): Adjust to take a bpstat as argument.
(catch_syscall_breakpoint_ops): Install methods.
(dtor_catch_exec): Call the base dtor.
(print_it_catch_exec): Adjust to take a bpstat as argument.
(catch_exec_breakpoint_ops): Install methods.
(hw_breakpoint_used_count, hw_watchpoint_used_count): Always call
the breakpoint's resources_needed method, and remove the default
code from here.
(set_momentary_breakpoint): Pass bkpt_breakpoint_ops as
breakpoint_ops.
(clone_momentary_breakpoint): Clone the original's ops.
(mention): Always call the breakpoint's print_mention method, and
remove the default code from here.
(create_breakpoint_sal): Adjust to pass the ops to
set_raw_breakpoint rather than setting it manually.
(create_breakpoint): Assert ops is never NULL. Adjust to pass the
ops to set_raw_breakpoint_without_location rather than setting it
manually.
(break_command_1): Pass bkpt_breakpoint_ops as breakpoint_ops.
(print_it_ranged_breakpoint): Adjust to take a bpstat as argument.
(ranged_breakpoint_ops): Install methods.
(break_range_command): Adjust to pass the ops to
set_raw_breakpoint rather than setting it manually.
(re_set_watchpoint, breakpoint_hit_watchpoint)
(check_status_watchpoint, resources_needed_watchpoint)
(works_in_software_mode_watchpoint, print_it_watchpoint)
(print_mention_watchpoint, print_recreate_watchpoint): New
functions.
(watchpoint_breakpoint_ops): Install new methods.
(print_it_masked_watchpoint): New function.
(masked_watchpoint_breakpoint_ops): Install new methods.
(watch_command_1): Adjust to pass the right breakpoint_ops to
set_raw_breakpoint_without_location rather than setting it
manually later. Record the current pspace.
(print_it_exception_catchpoint): Adjust to take a bpstat as
argument.
(gnu_v3_exception_catchpoint_ops): Install new methods.
(say_where): New function.
(null_re_set, null_check_status, null_works_in_software_mode)
(null_resources_needed, null_print_one_detail, bp_location_dtor):
New functions.
(bp_location_ops): New global.
(bkpt_dtor, bkpt_allocate_location, bkpt_re_set)
(bkpt_insert_location, bkpt_remove_location, bkpt_breakpoint_hit)
(bkpt_check_status, bkpt_resources_needed)
(bkpt_works_in_software_mode, bkpt_print_it, bkpt_print_mention)
(bkpt_print_recreate): New functions.
(bkpt_breakpoint_ops): New global.
(tracepoint_re_set, tracepoint_insert_location)
(tracepoint_remove_location, tracepoint_breakpoint_hit)
(tracepoint_check_status, tracepoint_works_in_software_mode)
(tracepoint_print_it, tracepoint_print_one_detail)
(tracepoint_print_mention, tracepoint_print_recreate): New
functions.
(tracepoint_breakpoint_ops): New global.
(delete_breakpoint): Always call the breakpoint's dtor method, and
remove the default handling from here.
(breakpoint_re_set_default): Make static.
(breakpoint_re_set_one): Always call the breakpoints re_set
method, and remove the default handling from here.
(trace_command, ftrace_command, strace_command)
(create_tracepoint_from_upload): Pass appropriate breakpoints_ops
to create_breakpoint.
(save_breakpoints): Always call the breakpoint's print_recreate
method, and remove the default handling from here.
* ada-lang.c (dtor_exception): Call the base dtor.
(re_set_exception): Call the base method.
(print_it_exception, print_it_catch_exception): Adjust to take a
bpstat as argument.
(catch_exception_breakpoint_ops): Install methods.
(print_it_catch_exception_unhandled): Adjust to take a bpstat as
argument.
(catch_exception_unhandled_breakpoint_ops): Install methods.
(print_it_catch_assert): Adjust to take a bpstat as argument.
(catch_assert_breakpoint_ops): Install methods.
* breakpoint.h (struct breakpoint_ops): Adjust the print_it method
to take a bpstat as argument.
(enum print_stop_action): Add describing comments to each enum
value.
(breakpoint_re_set_default): Delete declaration.
(null_re_set, null_works_in_software_mode, null_resources_needed)
(null_check_status, null_print_one_detail): Declare.
(bkpt_breakpoint_ops): Declare.
(bkpt_dtor, bkpt_allocate_location, bkpt_re_set)
(bkpt_insert_location, bkpt_remove_location, bkpt_breakpoint_hit)
(bkpt_check_status, bkpt_resources_needed)
(bkpt_works_in_software_mode, bkpt_print_it)
(null_print_one_detail, bkpt_print_mention, bkpt_print_recreate):
Declare.
* mi/mi-cmd-break.c (mi_cmd_break_insert): Adjust to pass
bkpt_breakpoint_ops.
* python/py-breakpoint.c (bppy_init): Ditto.
* breakpoint.c (bpstat_stop_status): Call the check_status
breakpoint_ops method.
(print_one_breakpoint_location): Also print the condition for Ada
exception catchpoints.
(allocate_bp_location): New, factored out from
allocate_bp_location.
(allocate_bp_location): Adjust. Call the owner breakpoint's
allocate_location method, if there is one.
(free_bp_location): Call the locations's dtor method, if there is
one.
(init_raw_breakpoint_without_location): New breakpoint_ops
parameter. Use it.
(set_raw_breakpoint_without_location): Adjust.
(init_raw_breakpoint): New breakpoint_ops parameter. Pass it down.
(set_raw_breakpoint): Adjust.
(catch_fork_breakpoint_ops, catch_vfork_breakpoint_ops)
(catch_syscall_breakpoint_ops): Install NULL allocate_location,
re_set and check_status methods.
(init_catchpoint): Don't memset, initialize thread, addr_string
and enable_state. Pass the ops down to init_raw_breakpoint.
(install_catchpoint): Rename to ...
(install_breakpoint): ... this, and make extern.
(create_fork_vfork_event_catchpoint): Adjust.
(catch_exec_breakpoint_ops): Install NULL allocate_location,
re_set and check_status methods.
(create_syscall_event_catchpoint): Adjust.
(ranged_breakpoint_ops, watchpoint_breakpoint_ops)
(masked_watchpoint_breakpoint_ops): Install NULL
allocate_location, re_set and check_status methods.
(catch_exec_command_1): Adjust.
(gnu_v3_exception_catchpoint_ops): Install NULL allocate_location,
re_set and check_status methods.
(create_ada_exception_breakpoint): Rename to ...
(init_ada_exception_breakpoint): ... this. Add a struct
breakpoint parameter, and delete the exp_string, cond_string and
cond parameters. Use init_raw_breakpoint, and don't install or
mention the breakpoint yet. Don't clear breakpoint fields that
init_raw_breakpoint already clears.
(re_set_breakpoint): Delete, split into ...
(breakpoint_re_set_default, prepare_re_set_context): ... these new
functions.
(breakpoint_re_set_one): Call the breakpoint's
breakpoint_ops->re_set implementation, if there's one. Adjust.
* breakpoint.h: Forward declare struct bpstats and struct bp_location.
(struct bp_location_ops): New type.
(struct bp_location): New field `ops'.
(struct breakpoint_ops): New `allocate_location', `re_set' and
`check_status' fields. Make `breakpoint_hit''s description match
reality.
(init_bp_location): Declare.
(breakpoint_re_set_default): Declare.
(create_ada_exception_breakpoint): Rename to ...
(init_ada_exception_breakpoint): ... this. Add a struct
breakpoint parameter, and delete the exp_string, cond_string and
cond parameters.
(install_breakpoint): Declare.
* ada-lang.c: Include exceptions.h.
<Ada exceptions description>: Update.
(struct ada_catchpoint_location): New type.
(ada_catchpoint_location_dtor): New function.
(ada_catchpoint_location_ops): New global.
(ada_catchpoint): New type.
(create_excep_cond_exprs): New function.
(dtor_exception, allocate_location_exception, re_set_exception)
(should_stop_exception, check_status_exception): New functions.
(print_one_exception, print_mention_exception)
(print_recreate_exception): Adjust.
(dtor_catch_exception, allocate_location_catch_exception)
(re_set_catch_exception, check_status_catch_exception): New
functions.
(catch_exception_breakpoint_ops): Install them.
(dtor_catch_exception_unhandled)
(allocate_location_catch_exception_unhandled)
(re_set_catch_exception_unhandled)
(check_status_catch_exception_unhandled): New functions.
(catch_exception_unhandled_breakpoint_ops): Install them.
(dtor_catch_assert, allocate_location_catch_assert)
(re_set_catch_assert, check_status_catch_assert): New functions.
(catch_assert_breakpoint_ops): Install them.
(ada_exception_catchpoint_p): Delete.
(catch_ada_exception_command_split)
(ada_exception_catchpoint_cond_string): Rename exp_string
parameter to excep_string. Adjust.
(ada_parse_catchpoint_condition): Delete.
(ada_exception_sal): Rename the exp_string parameter to
excep_string. Delete the cond_string and cond parameters.
Adjust.
(ada_decode_exception_location): Rename the exp_string parameter
to excep_string. Delete the cond_string and cond parameters.
Adjust.
(create_ada_exception_catchpoint): New function.
(catch_ada_exception_command, ada_decode_assert_location)
(catch_assert_command): Adjust.
* ada-lang.h (ada_exception_catchpoint_p): Delete declaration.
* ada-lang.c: Include arch-utils.h.
(ada_decode_exception_location): Make static.
(catch_ada_exception_command): Moved here from breakpoint.c.
(ada_decode_assert_location): Make static.
(catch_assert_command): Moved here from breakpoint.c.
(_initialize_ada_lang): Install the exception and assert
catchpoint commands here.
* ada-lang.h (ada_decode_exception_location)
(ada_decode_assert_location): Delete declarations.
* breakpoint.c (CATCH_PERMANENT, CATCH_TEMPORARY): Moved to
breakpoint.h.
(create_ada_exception_breakpoint): Make extern.
(catch_ada_exception_command, catch_assert_command): Moved to
ada-lang.c.
(add_catch_command): Make extern.
(_initilize_breakpoint): Don't install the exception and assert
catchpoint commands here.
* breakpoint.h (CATCH_PERMANENT, CATCH_TEMPORARY): Moved from
breakpoint.c
(add_catch_command, create_ada_exception_breakpoint): Declare.
* breakpoint.h (struct breakpoint_ops): New field `dtor'.
(struct breakpoint): Delete field `syscalls_to_be_caught'.
* breakpoint.c (init_raw_breakpoint_without_location): Remove
reference to syscalls_to_be_caught.
(catch_fork_breakpoint_ops, catch_vfork_breakpoint_ops): Install a
NULL `dtor'.
(struct syscall_catchpoint): New type.
(dtor_catch_syscall): New function.
(insert_catch_syscall, remove_catch_syscall)
(breakpoint_hit_catch_syscall, print_one_catch_syscall)
(print_recreate_catch_syscall): Adjust.
(catch_syscall_breakpoint_ops): Install dtor_catch_syscall.
(catch_exec_breakpoint_ops): Install a NULL `dtor'.
(create_syscall_event_catchpoint): Adjust to use init_catchpoint.
(ranged_breakpoint_ops, watchpoint_breakpoint_ops)
(masked_watchpoint_breakpoint_ops)
(gnu_v3_exception_catchpoint_ops): Install a NULL `dtor'.
(delete_breakpoint): Call the `dtor' breakpoint_ops method, if
there is one. Remove references to syscalls_to_be_caught.
(catching_syscall_number): Adjust.
* ada-lang.c (catch_exception_breakpoint_ops)
(catch_exception_unhandled_breakpoint_ops)
(catch_assert_breakpoint_ops): Install a NULL `dtor'.
gdb/ChangeLog:
From Stephen Kitt <steve@sk2.org>
* breakpoint.c, breakpoint.h, cli/cli-dump.c, dwarf2expr.c,
gdbarch.c, gdbarch.sh, remote.c: Various spelling fixes.
gdb/testsuite/ChangeLog:
From Stephen Kitt <steve@sk2.org>
* gdb.base/help.exp: Adjust following some spelling corrections
in GDB.
Thiago Jung Bauermann <bauerman@br.ibm.com>
Implement support for PowerPC BookE masked watchpoints.
gdb/
* NEWS: Mention masked watchpoint support. Create "Changed commands"
section.
* breakpoint.h (struct breakpoint_ops) <works_in_software_mode>: New
method. Initialize to NULL in all existing breakpoint_ops instances.
(struct breakpoint) <hw_wp_mask>: New field.
* breakpoint.c (is_masked_watchpoint): Add prototype.
(update_watchpoint): Don't set b->val for masked watchpoints. Call
breakpoint's breakpoint_ops.works_in_software_mode if available.
(watchpoints_triggered): Handle the case of a hardware masked
watchpoint trigger.
(watchpoint_check): Likewise.
(works_in_software_mode_watchpoint): New function.
(insert_masked_watchpoint, remove_masked_watchpoint)
(resources_needed_masked_watchpoint)
(works_in_software_mode_masked_watchpoint, print_it_masked_watchpoint)
(print_one_detail_masked_watchpoint, print_mention_masked_watchpoint)
(print_recreate_masked_watchpoint, is_masked_watchpoint): New
functions.
(masked_watchpoint_breakpoint_ops): New structure.
(watch_command_1): Check for the existence of the `mask' parameter.
Set b->ops according to the type of hardware watchpoint being created.
* ppc-linux-nat.c (ppc_linux_insert_mask_watchpoint)
(ppc_linux_remove_mask_watchpoint)
(ppc_linux_masked_watch_num_registers): New functions.
(_initialize_ppc_linux_nat): Initialize to_insert_mask_watchpoint,
to_remove_mask_watchpoint and to_masked_watch_num_registers.
* target.c (update_current_target): Mention to_insert_mask_watchpoint,
to_remove_mask_watchpoint, and to_masked_watch_num_registers.
(target_insert_mask_watchpoint, target_remove_mask_watchpoint)
(target_masked_watch_num_registers): New functions.
* target.h (struct target_ops) <to_insert_mask_watchpoint>,
<to_remove_mask_watchpoint>, <to_masked_watch_num_registers>: New
methods.
(target_insert_mask_watchpoint, target_remove_mask_watchpoint)
(target_masked_watch_num_registers): Add prototypes.
gdb/doc/
* gdb.texinfo (Set Watchpoints): Document mask parameter.
(PowerPC Embedded): Mention support of masked watchpoints.
This rewrites the code generating the Ada exception catchpoint hit
notification for both the GDB/MI case as well as the non-MI case,
by using the relevant ui_out_* functions to generate the output.
the MI notifications for Ada exception catchpoints now include
the stop reason, and the breakpoint "disp", much like other breakpoint
events do. It also introduces a new field "exception-name" for
exception catchpoints (excluding "failed assertion catchpoints,
where we just want to know that it was a failed assertion).
gdb/ChangeLog:
* breakpoint.h (bpdisp_text): Add declaration.
* breakpoint.c (bpdisp_text): Make non-static.
* ada-lang.c: #include "mi/mi-common.h".
(print_it_exception): Rewrite to improve GDB/MI output.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Ada Exception Information): Document
the "exception-name" field in the *stopped async record.
gdb/testsuite/ChangeLog:
* gdb.ada/mi_catch_ex: New testcase.
Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
Implement support for PowerPC BookE ranged breakpoints.
gdb/
* NEWS: Mention support for ranged breakpoints on embedded PowerPC.
* breakpoint.h (struct bp_target_info) <length>: New member
variable.
(struct breakpoint_ops) <breakpoint_hit>: Take struct bp_location
instead of struct breakpoint as argument, and also add ASPACE
and BP_ADDR arguments. Update all callers.
(struct breakpoint_ops) <print_one_detail>: New method.
(struct breakpoint) <addr_string_range_end>: New member variable.
* breakpoint.c (breakpoint_location_address_match): Add function
prototype.
(insert_bp_location): Set bl->target_info.length.
(breakpoint_here_p): Call breakpoint_location_address_match.
(moribund_breakpoint_here_p): Likewise.
(regular_breakpoint_inserted_here_p): Likewise.
(breakpoint_thread_match): Likewise.
(bpstat_stop_status): Likewise.
(bpstat_check_location): Move call to
breakpoint_ops.breakpoint_hit to the top.
(print_one_breakpoint_location): Call
breakpoint_ops.print_one_detail if available.
(breakpoint_address_match_range): New function.
(breakpoint_location_address_match): Likewise.
(breakpoint_locations_match): Compare the length field of the
locations too.
(hw_breakpoint_used_count): Count resources used by all locations
in a breakpoint, and use breakpoint_ops.resources_needed if
available.
(breakpoint_hit_ranged_breakpoint): New function.
(resources_needed_ranged_breakpoint): Likewise.
(print_it_ranged_breakpoint): Likewise.
(print_one_ranged_breakpoint): Likewise.
(print_one_detail_ranged_breakpoint): Likewise.
(print_mention_ranged_breakpoint): Likewise.
(print_recreate_ranged_breakpoint): Likewise.
(ranged_breakpoint_ops): New structure.
(find_breakpoint_range_end): New function.
(break_range_command): Likewise.
(delete_breakpoint): Free addr_string_range_end.
(update_breakpoint_locations): Add SALS_END argument. Update
all callers. Calculate breakpoint length if a non-zero SALS_END
is given. Call breakpoint_locations_match instead of
breakpoint_address_match.
(reset_breakpoint): Find SaL of the end of the range if B is a
ranged breakpoint.
(_initialize_breakpoint): Register break-range command.
* defs.h (print_core_address): Add function prototype.
* ppc-linux-nat.c (ppc_linux_ranged_break_num_registers): New
function.
(ppc_linux_insert_hw_breakpoint): Support ranged breakpoints.
(ppc_linux_remove_hw_breakpoint): Likewise.
(_initialize_ppc_linux_nat): Initialize
to_ranged_break_num_registers.
* target.c (update_current_target): Add comment about
to_ranged_break_num_registers.
(target_ranged_break_num_registers): New function.
* target.h (struct target_ops) <to_ranged_break_num_registers>:
New method.
(target_ranged_break_num_registers): Add function prototype.
* ui-out.c (ui_out_field_core_addr): Move address-printing logic to ...
* utils.c (print_core_address): ... here.
gdb/doc/
* gdb.texinfo (PowerPC Embedded): Document ranged breakpoints.
Support resolution of STT_GNU_IFUNC via breakpoints.
* breakpoint.c (print_it_typical): Support bp_gnu_ifunc_resolver and
bp_gnu_ifunc_resolver_return.
(bpstat_what): Rename parameter to bs_head, new variable bs, adjust
the loop. Support bp_gnu_ifunc_resolver and
bp_gnu_ifunc_resolver_return. New comment after the loop. New loop
for bp_gnu_ifunc_resolver and bp_gnu_ifunc_resolver_return
breakpoints.
(bptype_string, print_one_breakpoint_location): Support
bp_gnu_ifunc_resolver and bp_gnu_ifunc_resolver_return.
(user_settable_breakpoint): Return true also for
bp_gnu_ifunc_resolver.
(allocate_bp_location): Support bp_gnu_ifunc_resolver and
bp_gnu_ifunc_resolver_return.
(set_breakpoint_location_function): New parameter explicit_loc,
describe it. Call find_pc_partial_function_gnu_ifunc with new
variable IS_GNU_IFUNC and adjust the address for STT_GNU_IFUNC if
EXPLICIT_LOC is not set.
(set_raw_breakpoint): Set EXPLICIT_LOC for
set_breakpoint_location_function.
(clone_momentary_breakpoint): Use true for EXPLICIT_LOC of
set_breakpoint_location_function.
(mention): Support bp_gnu_ifunc_resolver and
bp_gnu_ifunc_resolver_return.
(add_location_to_breakpoint): Set EXPLICIT_LOC for
set_breakpoint_location_function.
(update_breakpoint_locations): Remove static.
(breakpoint_re_set_one): Support bp_gnu_ifunc_resolver and
bp_gnu_ifunc_resolver_return.
* breakpoint.h (enum bptype): New fields bp_gnu_ifunc_resolver and
bp_gnu_ifunc_resolver_return.
(update_breakpoint_locations): New declaration.
* elfread.c: Include gdbthread.h and regcache.h.
(elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): New
functions.
(elf_gnu_ifunc_fns): Install them.
* minsyms.c (stub_gnu_ifunc_resolver_stop)
(stub_gnu_ifunc_resolver_return_stop): New functions.
(stub_gnu_ifunc_fns): Install them.
* symtab.h (struct gnu_ifunc_fns): New fields gnu_ifunc_resolver_stop
and gnu_ifunc_resolver_return_stop.
(gnu_ifunc_resolver_stop, gnu_ifunc_resolver_return_stop): New.
* breakpoint.h (get_number_or_range): Declare.
* printcmd.c (ALL_DISPLAYS): Declare.
(delete_display): Reimplement taking a display pointer.
(undisplay_command): Accept a range of displays to delete, using
get_number_or_range.
* breakpoint.c (update_watchpoint): Fix name of the
update_global_location_list function.
(print_one_breakpoint): Fix typo.
(_initialize_breakpoint): Remove extra space in hbreak help
string.
* breakpoint.h (struct bp_location) <length>: Fix field
description.
Thiago Jung Bauermann <bauerman@br.ibm.com>
Implement support for PowerPC BookE ranged watchpoints.
gdb/
* breakpoint.h
(struct breakpoint_ops) <resources_needed>: New method.
Initialize to NULL in all existing breakpoint_ops instances.
(struct breakpoint) <exact>: New field.
(target_exact_watchpoints): Declare external global.
* breakpoint.c (target_exact_watchpoints): New global flag.
(update_watchpoint): Set b->type to bp_hardware_watchpoint and
b->enable_state to bp_enabled before calling
hw_watchpoint_used_count.
(hw_watchpoint_used_count): Iterate over all bp_locations in a
watchpoint. Call breakpoint's breakpoint_ops.resources_needed
if available.
(insert_watchpoint, remove_watchpoint): Use fixed length of 1 byte
if the watchpoint is exact.
(resources_needed_watchpoint): New function.
(watchpoint_breakpoint_ops): Add resources_needed_watchpoint.
(watch_command_1): Set b->exact if the user asked for an exact
watchpoint and one can be set.
(can_use_hardware_watchpoint): Add exact_watchpoints argument.
Pass fixed length of 1 to target_region_ok_for_hw_watchpoint if
the user asks for an exact watchpoint and one can be set. Return
number of needed debug registers to watch the expression.
* gdbtypes.c (is_scalar_type): New function, based on
valprint.c:scalar_type_p.
(is_scalar_type_recursive): New function.
* gdbtypes.h (is_scalar_type_recursive): Declare.
* ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Always
handle regions when ranged watchpoints are available.
(create_watchpoint_request): New function.
(ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
create_watchpoint_request.
* rs6000-tdep.c (show_powerpc_exact_watchpoints): New function.
(_initialize_rs6000_tdep): Add `exact-watchpoints' boolean to the
`set powerpc' and `show powerpc' commands.
* target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
Mention documentation comment in the target macro.
(target_region_ok_for_hw_watchpoint): Document return value.
gdb/doc/
* gdb.texinfo (PowerPC Embedded): Document ranged watchpoints and
the "set powerpc exact-watchpoints" flag.
Convert hardware watchpoints to use breakpoint_ops.
gdb/
* breakpoint.h (breakpoint_ops) <insert>: Rename to...
<insert_location>: ... this. Return int instead of void.
Accept pointer to struct bp_location instead of pointer to
struct breakpoint. Adapt all implementations.
(breakpoint_ops) <remove>: Rename to...
<remove_location>: ... this. Accept pointer to struct bp_location
instead of pointer to struct breakpoint. Adapt all implementations.
* breakpoint.c (insert_catchpoint): Delete function.
(insert_bp_location): Call the watchpoint or catchpoint's
breakpoint_ops.insert method.
(remove_breakpoint_1): Call the watchpoint or catchpoint's
breakpoint_ops.remove method.
(insert_watchpoint, remove_watchpoint): New functions.
(watchpoint_breakpoint_ops): New structure.
(watch_command_1): Initialize the OPS field.
* inf-child.c (inf_child_insert_fork_catchpoint)
(inf_child_remove_fork_catchpoint, inf_child_insert_vfork_catchpoint)
(inf_child_remove_vfork_catchpoint, inf_child_insert_exec_catchpoint)
(inf_child_remove_exec_catchpoint, inf_child_set_syscall_catchpoint):
Delete functions.
(inf_child_target): Remove initialization of to_insert_fork_catchpoint,
to_remove_fork_catchpoint, to_insert_vfork_catchpoint,
to_remove_vfork_catchpoint, to_insert_exec_catchpoint,
to_remove_exec_catchpoint and to_set_syscall_catchpoint.
* target.c (update_current_target): Change default implementation of
to_insert_fork_catchpoint, to_remove_fork_catchpoint,
to_insert_vfork_catchpoint, to_remove_vfork_catchpoint,
to_insert_exec_catchpoint, to_remove_exec_catchpoint and
to_set_syscall_catchpoint to return_one.
(debug_to_insert_fork_catchpoint, debug_to_insert_vfork_catchpoint)
(debug_to_insert_exec_catchpoint): Report return value.
* target.h (to_insert_fork_catchpoint, to_insert_vfork_catchpoint)
(to_insert_exec_catchpoint): Change declaration to return int instead
of void.
gdb/testsuite/
* gdb.base/foll-exec.exp: Adapt to new error string when the catchpoint
type is not supported.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
* python/py-breakpoint.c (BPPY_REQUIRE_VALID): Check if bp is
NULL.
(BPPY_SET_REQUIRE_VALID): Ditto.
(bpnum_is_valid): Delete function.
(bppy_get_visibility): New function.
(bppy_new): Parse for, and validate internal keyword. Pass
internal keyword to breakpoint or watchpoint functions.
(build_bp_list): New function.
(gdbpy_breakpoints): Rewrite. Use build_bp_list and
iterate_over_breakpoints.
(gdbpy_breakpoint_created): Rewrite. Do not store breakpoints in a
look-aside vector.
(gdbpy_breakpoint_deleted): Rewrite, defer breakpoint management
to internal breakpoint chain.
* breakpoint.c (set_breakpoint_number): New function.
(breakpoint_1): Check if breakpoint number is more than zero.
(set_raw_breakpoint_without_location): Set py_bp_object to NULL.
(create_breakpoint_sal): Take a new parameter called internal.
Call set_breakpoint_number with internal parameter. Do not
mention internal breakpoints. All callers updated.
(create_breakpoint): Ditto.
(create_breakpoints_sal): Ditto.
(watch_command_1): Ditto.
(watch_command_wrapper): Take a new parameter called internal.
All callers updated.
(rwatch_command_wrapper): Ditto.
(awatch_command_wrapper): Ditto.
(save_breakpoints): Update breakpoint save condition check.
(iterate_over_breakpoints): New function.
* breakpoint.h: Add conditional python includes. Add py_bp_object
and comment to struct breakpoint. Update all callers.
* defs.h: Add PyObject definition for GDB builds without Python.
2010-11-11 Phil Muldoon <pmuldoon@redhat.com>
* gdb.texinfo (Breakpoints In Python): Document "internal"
parameter, and visible attribute.
2010-11-11 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-breakpoint.exp: Add internal watchpoint and
breakpoint tests.
2010-08-17 Pedro Alves <pedro@codesourcery.com>
PR breakpoints/11371
* breakpoint.c (breakpoint_init_inferior): Decrement the
location's reference count instead of deleting right away.
(bpstat_free): Decrement the location's reference count. Make
static.
(bpstat_copy): Increment the location's reference count.
(bpstat_find_breakpoint): Adjust.
(bpstat_num): Adjust.
(print_it_typical): Adjust. Use the breakpoint pointer in the
bpstat instead of the location's owner.
(bpstat_alloc): Remove const qualifier from the 'bl' parameter.
Adjust to record the location's owner in the bpstat.
(watchpoint_check): Use the breakpoint pointer in the bpstat
instead of the location's owner.
(bpstat_check_breakpoint_conditions): Don't handle
bp_watchpoint_scope here. Use the breakpoint pointer in the
bpstat instead of the location's owner.
(bpstat_stop_status): Defer inferior function calls to after
building the bpstat list. Handle bp_watchpoint_scope here. Use
the breakpoint pointer in the bpstat instead of the location's
owner.
(bpstat_what): Use the breakpoint pointer in the bpstat instead of
the location's owner.
(free_bp_location): Don't walk bpstats clearing locations.
(incref_bp_location): New.
(decref_bp_location): New.
(breakpoint_auto_delete): Use the breakpoint pointer in the bpstat
instead of the location's owner.
(update_global_location_list): Clear the location's owner, and
decrement the location's reference count instead of deleting it
right away.
(breakpoint_retire_moribund): Decrement the location's reference
count instead of deleting it right away.
(bpstat_remove_bp_location): Delete.
(bpstat_remove_breakpoint): New.
(bpstat_remove_bp_location_callback): Delete.
(bpstat_remove_breakpoint_callback): New.
(delete_breakpoint): Iterate over all threads' stop_bpstat's
clearing references to the breakpoint that is being deleted.
* breakpoint.h (struct bp_location) <refc>: New field.
<owner>: Update comments.
(bpstat_free): Delete declaration.
(struct bpstats): Change the type of the breakpoint_at field to
struct breakpoint point, from struct bp_location pointer. Add new
field bp_location_at.
gdb/testsuite/
2010-08-17 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <pedro@codesourcery.com>
PR breakpoints/11371
* gdb.base/watch-cond-infcall.exp: New file.
* gdb.base/watch-cond-infcall.c: New file.
* breakpoint.c (update_watchpoint): Add source empty line. Prefer
EXP_STRING_REPARSE to EXP_STRING.
(watch_command_1): Set also EXP_STRING_REPARSE.
(delete_breakpoint): Free also EXP_STRING_REPARSE.
* breakpoint.h (struct breakpoint): New field exp_string_reparse.
Update comment for exp_string.
* infrun.c (handle_inferior_event): Handle presence of single-step
breakpoints for TARGET_WAITKIND_FORKED and TARGET_WAITKIND_VFORKED.
Cancel single-step breakpoints for TARGET_WAITKIND_EXITED,
TARGET_WAITKIND_SIGNALED, and TARGET_WAITKIND_EXECD.
* breakpoint.c (detach_single_step_breakpoints): New function.
(detach_breakpoints): Call it.
(cancel_single_step_breakpoints): New function.
* breakpoint.h (cancel_single_step_breakpoints): Add prototype.
* spu-tdep.c (spu_memory_remove_breakpoint): New function.
(spu_gdbarch_init): Install it.
testsuite/ChangeLog:
* gdb.cell/fork.exp: New file.
* gdb.cell/fork.c: Likewise.
* gdb.cell/fork-spu.c: Likewise.
Implement `save-breakpoints'.
gdb/
* breakpoint.c (save_cmdlist): New.
(breakpoint_set_cmdlist, breakpoint_show_cmdlist): Moved up close
to save_cmdlist.
(print_recreate_catch_fork): New.
(catch_fork_breakpoint_ops): Install it.
(print_recreate_catch_vfork): New.
(catch_vfork_breakpoint_ops): Install it.
(print_recreate_catch_syscall): New.
(catch_syscall_breakpoint_ops): Install it.
(print_recreate_catch_exec): New.
(catch_exec_breakpoint_ops): Install it.
(print_recreate_exception_catchpoint): New.
(gnu_v3_exception_catchpoint_ops): Install it.
(save_breakpoints): New, based on tracepoint_save_command, but
handle all breakpoint types.
(save_breakpoints_command): New.
(tracepoint_save_command): Rename to...
(save_tracepoints_command): ... this, and reimplement using
save_breakpoints.
(save_command): New.
(_initialize_breakpoints): Install the "save" command prefix.
Install the "save breakpoints" command. Make "save-tracepoints" a
deprecated alias for "save tracepoints".
* breakpoint.h (struct breakpoint_ops): New field `print_recreate'.
* ada-lang.c (print_recreate_exception): New.
(print_recreate_catch_exception): New.
(catch_exception_breakpoint_ops): Install it.
(print_recreate_catch_exception_unhandled): New.
(catch_exception_unhandled_breakpoint_ops): Install it.
(print_recreate_catch_assert): New.
(catch_assert_breakpoint_ops): Install it.
* NEWS: Mention the new `save breakpoints' command. Mention the
new `save tracepoints' alias and that `save-tracepoints' is now
deprecated.
gdb/doc/
* gdb.texinfo (Save Breakpoints): New node.
(save-tracepoints): Rename to ...
(save tracepoints): ... this. Mention that `save-tracepoints' is
a deprecated alias to `save tracepoints'.
gdb/testsuite/
* gdb.trace/save-trace.exp: Adjust.
Nathan Sidwell <nathan@codesourcery.com>
* breakpoint.c (breakpoint_1): Add filter argument, return number of
breakpoints printed.
(is_hardware_watchpoint): Make argument const.
(is_watchpoint): Ditto.
(is_tracepoint): Merge of tracepoint_type and breakpoint_is_tracepoint,
use it everywhere.
(breakpoints_info): Pass NULL to breakpoint_1.
(maintenance_info_breakpoints): Ditto.
(watchpoints_info): New function.
(tracepoints_info): Use breakpoint_1 filter.
(set_ignore_count): Warn that tracepoint ignore count will be ignored.
(_initialize_breakpoint): Make "info watchpoints" its own command.
* breakpoint.h (is_tracepoint): Rename from breakpoint_is_tracepoint.
* mi/mi-cmd-break.c (mi_cmd_break_commands): Use is_tracepoint.
* gdb.texinfo (Setting Breakpoints): "info watch" no longer a synonym.
(Setting Watchpoints): Update description of "info watch".
(Disabling Breakpoints): Only "info break" lists all.
* gdb.base/completion.exp: Update for new "info watchpoints".
* gdb.base/default.exp: Ditto.
* gdb.base/help.exp: Ditto.
* gdb.base/watchpoint.exp: Ditto.
* gdb.trace/infotrace.exp: Update "info tracpoints" output.
PR breakpoints/9352:
* NEWS: Mention changes to `commands' and `rbreak'.
* symtab.c (do_end_rbreak_breakpoints): New function.
(rbreak_command): Call start_rbreak_breakpoints; arrange to call
end_rbreak_breakpoints.
* breakpoint.c (breakpoint_count, tracepoint_count): Now static.
(set_breakpoint_count): Likewise. Clear last_was_multi.
(multi_start, multi_end, last_was_multi): New globals.
(start_rbreak_breakpoints, end_rbreak_breakpoints): New
functions.
(struct commands_info): New
(do_map_commands_command): New function.
(commands_command_1): New function.
(commands_command): Use it.
(commands_from_control_command): Likewise.
(do_delete_breakpoint): New function.
(delete_command): Use it.
(map_breakpoint_numbers): Add 'data' argument. Pass to callback.
(do_map_disable_breakpoint): New function.
(disable_command): Use it.
(do_map_enable_breakpoint): New function.
(enable_command): Use it.
(enable_once_breakpoint): Add argument.
(enable_once_command): Update.
(enable_delete_breakpoint): Add argument.
(enable_delete_command): Update.
(break_command_really): Set last_was_multi when needed.
(check_tracepoint_command): Fix formatting.
(validate_commands_for_breakpoint): New function.
(breakpoint_set_commands): Use it.
(tracepoint_save_command): Update.
* breakpoint.h (start_rbreak_breakpoints, end_rbreak_breakpoints):
Declare.
gdb/doc
PR breakpoints/9352:
* gdb.texinfo (Break Commands): Update.
gdb/testsuite
PR breakpoints/9352:
* gdb.base/default.exp: Update.
* gdb.base/commands.exp: Update.
* gdb.cp/extern-c.exp: Test setting commands on multiple
breakpoints at once.
Pedro Alves
Yao Qi
Tom Tromey
Doug Evans
Joel Brobecker
Joel Brobecker
Hui Zhu
Gary Benson
Keith Seitz
Jan Kratochvil
Mircea Gherzan
Stan Shebs
Maciej W. Rozycki
Sergio Durigan Junior
Luis Machado
Kevin Pouget
Justin Lebar
Thiago Jung Bauermann
Paul Pluzhnikov
Michael Snyder
Phil Muldoon
Ulrich Weigand