Rename and move inferior_thread_state and inferior_status.
* gdbthread.h (struct thread_control_state): New struct, move fields
step_range_start, step_range_end, step_frame_id, step_stack_frame_id,
trap_expected, proceed_to_finish, in_infcall, step_over_calls,
stop_step and stop_bpstat here from struct thread_info.
(struct thread_suspend_state): New struct, move field stop_signal here
from struct thread_info.
(struct thread_info): Move the fields above from this struct.
* inferior.h: Move the inferior_thread_state and inferior_status
declarations comment to their definitions at infrun.c.
(struct inferior_control_state): New struct, move field stop_soon from
struct inferior here.
(struct inferior_suspend_state): New empty struct.
(struct inferior): New fields control and suspend. Move out field
stop_soon.
* infrun.c (struct inferior_thread_state): Rename to ...
(infcall_suspend_state): ... here. Replace field stop_signal by
fields thread_suspend and inferior_suspend.
(save_inferior_thread_state): Rename to ...
(save_infcall_suspend_state): ... here. New variable inf. Update the
code for new fields.
(restore_inferior_thread_state): Rename to ...
(restore_infcall_suspend_state): ... here. New variable inf. Update
the code for new fields.
(do_restore_inferior_thread_state_cleanup): Rename to ...
(do_restore_infcall_suspend_state_cleanup): ... here.
(make_cleanup_restore_inferior_thread_state): Rename to ...
(make_cleanup_restore_infcall_suspend_state): ... here.
(discard_inferior_thread_state): Rename to ...
(discard_infcall_suspend_state): ... here.
(get_inferior_thread_state_regcache): Rename to ...
(get_infcall_suspend_state_regcache): ... here.
(struct inferior_status): Rename to ...
(struct infcall_control_state): ... here. Replace fields
step_range_start, step_range_end, step_frame_id, step_stack_frame_id,
trap_expected, proceed_to_finish, in_infcall, step_over_calls,
stop_step, stop_bpstat and stop_soon by fields thread_control and
inferior_control.
(save_inferior_status): Rename to ...
(save_infcall_control_state): ... here. Update the code for new
fields.
(restore_inferior_status): Rename to ...
(restore_infcall_control_state): ... here. Update the code for new
fields.
(do_restore_inferior_status_cleanup): Rename to ...
(do_restore_infcall_control_state_cleanup): ... here.
(make_cleanup_restore_inferior_status): Rename to ...
(make_cleanup_restore_infcall_control_state): ... here.
(discard_inferior_status): Rename to ...
(discard_infcall_control_state): ... here.
* alpha-tdep.c, breakpoint.c, dummy-frame.c, dummy-frame.h,
exceptions.c, fbsd-nat.c, gdbthread.h, infcall.c, infcmd.c,
inferior.c, inferior.h, infrun.c, linux-nat.c, mi/mi-interp.c,
mips-tdep.c, procfs.c, solib-irix.c, solib-osf.c, solib-spu.c,
solib-sunos.c, solib-svr4.c, thread.c, windows-nat.c: Update all the
references to the moved fields and renamed functions.
* infcall.c: White space.
* inf-child.c: White space.
* infcmd.c: White space.
* inferior.c: White space.
* inf-loop.c: White space.
* inflow.c: White space.
* inline-frame.c: White space.
* interps.c: White space.
Pedro Alves <pedro@codesourcery.com>
* tracepoint.h (struct trace_status): New fields disconnected_tracing
and circular_buffer.
(disconnect_tracing): Rename from disconnect_or_stop_tracing.
* tracepoint.c (trace_status_command): Display target's status for
disconnected tracing and circular buffer.
(disconnect_tracing): Rename from disconnect_or_stop_tracing, add
query for non-disconnected-tracing case, remove the stop_tracing
call.
(tfile_open): Clear disconnected and circular buffer status.
(trace_save): Save disconnected and circular buffer status.
(parse_trace_status): Parse disconnected and circular buffer status,
also recognize disconnected as a stop reason.
* remote.c (remote_set_disconnected_tracing): Only set
QTDisconnected if the remote end supports disconnected tracing.
Warn otherwise, if trying to enable disconnected tracing.
* infcmd.c (detach_command): Update disconnect_tracing call.
* cli/cli-cmds.c (quit_command): Ditto.
* gdb.texinfo (Tracepoint Packets): Describe disconn and circular
trace status fields.
* infcmd.c (until_command): Use ERROR_NO_INFERIOR. Ensure there's
a valid selected thread, and that it is not running.
(advance_command): Ditto.
(finish_command): Ditto.
gdb/testsuite/
* gdb.base/default.exp: Adjust.
* infcmd.c (inferior_args): Rename to ...
(inferior_args_scratch): ... this.
(inferior_io_terminal): Rename to ...
(inferior_io_terminal_scratch): ... this.
(inferior_argc, inferior_argv): Remove.
(set_inferior_io_terminal, get_inferior_io_terminal): Store
inside current_inferior().
(set_inferior_tty_command, show_inferior_tty_command): New.
(get_inferior_args, set_inferior_args): Store inside
current_inferior().
(notice_args_set): Likewise and rename to...
(set_args_command): ... this.
(set_inferior_args_vector): Likewise.
(notice_args_read): Rename to...
(show_args_command): ...new.
(tty_command): Remove.
(run_command_1): Don't free old args, as they are freed by
set_inferior_arg now.
(run_no_args_command): Likewise.
(inferior_environ): Remove.
(run_command_1): Use environment of the current inferior.
(environment_info, set_environment_command)
(unset_environment_command, path_info, path_command): Likewise.
(_initialize_infcmd): Adjust for function and variable renames.
Do not init inferior_environ.
* inferior.h (set_inferior_arg): Adjust prototype.
(struct inferior): New fields args, argc, argv, terminal, environment.
(inferior_environ): Remove declaration.
* inferior.c (free_inferior): Free new fields.
(add_inferior_silent): Initialize 'environment' field.
* main.c (captured_main): Set arguments only after the initial
inferior has been created. Set set_inferior_io_terminal,
not tty_command.
* mi/mi-main.c (mi_cmd_env_path): Use environment of the current
inferior.
(_initialize_mi_cmd_env): Adjust for disappearance of global
inferior_environ.
* solib.c (solib_find): Use environment of the current inferior.
* infcmd.c (detach_command): Ask whether to stop tracing.
* cli/cli-cmds.c (quit_command): Ditto.
* breakpoint.h (struct breakpoint): New field number_on_target.
* breakpoint.c (create_tracepoint_from_upload): New function.
(get_tracepoint_by_number_on_target): New function.
* remote.c (struct remote): New field disconnected_tracing.
(remote_disconnected_tracing_feature): New function.
(remote_protocol_features): Add DisconnectedTracing.
(struct uploaded_tp): New struct.
(uploaded_tps): New global.
(get_uploaded_tp): New function.
(find_matching_tracepoint): New function.
(remote_get_tracing_state): New function.
(remote_start_remote): Call it.
* tracepoint.c (disconnected_tracing): New global.
(trace_start_command): Initialize number_on_target.
(stop_tracing): New function, split out from...
(trace_stop_command): Call stop_tracing.
(get_trace_status): New function, split out from...
(trace_status_command): Call get_trace_status, add info on
disconnection behavior.
(disconnect_or_stop_tracing): New function.
(finish_tfind_command): Translate from number on target.
(trace_find_tracepoint_command): Translate to number on target.
(send_disconnected_tracing_value): New function.
(set_disconnected_tracing): New function.
(_initialize_tracepoint): Add disconnected-tracing variable.
* NEWS: Mention disconnected tracing.
* gdb.texinfo (Starting and Stopping Trace Experiments): Document
disconnected tracing.
(Tracepoint Packets): Document new protocol.
Stan Shebs <stan@codesourcery.com>
Add base multi-executable/process support to GDB.
gdb/
* Makefile.in (SFILES): Add progspace.c.
(COMMON_OBS): Add progspace.o.
* progspace.h: New.
* progspace.c: New.
* breakpoint.h (struct bp_target_info) <placed_address_space>: New
field.
(struct bp_location) <pspace>: New field.
(struct breakpoint) <pspace>: New field.
(bpstat_stop_status, breakpoint_here_p)
(moribund_breakpoint_here_p, breakpoint_inserted_here_p)
(regular_breakpoint_inserted_here_p)
(software_breakpoint_inserted_here_p, breakpoint_thread_match)
(set_default_breakpoint): Adjust prototypes.
(remove_breakpoints_pid, breakpoint_program_space_exit): Declare.
(insert_single_step_breakpoint, deprecated_insert_raw_breakpoint):
Adjust prototypes.
* breakpoint.c (executing_startup): Delete.
(default_breakpoint_sspace): New.
(breakpoint_restore_shadows): Skip if the address space doesn't
match.
(update_watchpoint): Record the frame's program space in the
breakpoint location.
(insert_bp_location): Record the address space in target_info.
Adjust to pass the symbol space to solib_name_from_address.
(breakpoint_program_space_exit): New.
(insert_breakpoint_locations): Switch the symbol space and thread
when inserting breakpoints. Don't insert breakpoints in a vfork
parent waiting for vfork done if we're not attached to the vfork
child.
(remove_breakpoints_pid): New.
(reattach_breakpoints): Switch to a thread of PID. Ignore
breakpoints of other symbol spaces.
(create_internal_breakpoint): Store the symbol space in the sal.
(create_longjmp_master_breakpoint): Iterate over all symbol
spaces.
(update_breakpoints_after_exec): Ignore breakpoints for other
symbol spaces.
(remove_breakpoint): Rename to ...
(remove_breakpoint_1): ... this. Pass the breakpoints symbol
space to solib_name_from_address.
(remove_breakpoint): New.
(mark_breakpoints_out): Ignore breakpoints from other symbol
spaces.
(breakpoint_init_inferior): Ditto.
(breakpoint_here_p): Add an address space argument and adjust to
use breakpoint_address_match.
(moribund_breakpoint_here_p): Ditto.
(regular_breakpoint_inserted_here_p): Ditto.
(breakpoint_inserted_here_p): Ditto.
(software_breakpoint_inserted_here_p): Ditto.
(breakpoint_thread_match): Ditto.
(bpstat_check_location): Ditto.
(bpstat_stop_status): Ditto.
(print_breakpoint_location): If there's a location to print,
switch the current symbol space.
(print_one_breakpoint_location): Add `allflag' argument.
(print_one_breakpoint): Ditto. Adjust.
(do_captured_breakpoint_query): Adjust.
(breakpoint_1): Adjust.
(breakpoint_has_pc): Also match the symbol space.
(describe_other_breakpoints): Add a symbol space argument and
adjust.
(set_default_breakpoint): Add a symbol space argument. Set
default_breakpoint_sspace.
(breakpoint_address_match): New.
(check_duplicates_for): Add an address space argument, and adjust.
(set_raw_breakpoint): Record the symbol space in the location and
in the breakpoint.
(set_longjmp_breakpoint): Skip longjmp master breakpoints from
other symbol spaces.
(remove_thread_event_breakpoints, remove_solib_event_breakpoints)
(disable_breakpoints_in_shlibs): Skip breakpoints from other
symbol spaces.
(disable_breakpoints_in_unloaded_shlib): Match symbol spaces.
(create_catchpoint): Set the symbol space in the sal.
(disable_breakpoints_before_startup): Skip breakpoints from other
symbol spaces. Set executing_startup in the current symbol space.
(enable_breakpoints_after_startup): Clear executing_startup in the
current symbol space. Skip breakpoints from other symbol spaces.
(clone_momentary_breakpoint): Also copy the symbol space.
(add_location_to_breakpoint): Set the location's symbol space.
(bp_loc_is_permanent): Switch thread and symbol space.
(create_breakpoint): Adjust.
(expand_line_sal_maybe): Expand comment to mention symbol spaces.
Switch thread and symbol space when reading memory.
(parse_breakpoint_sals): Set the symbol space in the sal.
(break_command_really): Ditto.
(skip_prologue_sal): Switch and space.
(resolve_sal_pc): Ditto.
(watch_command_1): Record the symbol space in the sal.
(create_ada_exception_breakpoint): Adjust.
(clear_command): Adjust. Match symbol spaces.
(update_global_location_list): Use breakpoint_address_match.
(breakpoint_re_set_one): Switch thread and space.
(breakpoint_re_set): Save symbol space.
(breakpoint_re_set_thread): Also reset the symbol space.
(deprecated_insert_raw_breakpoint): Add an address space argument.
Adjust.
(insert_single_step_breakpoint): Ditto.
(single_step_breakpoint_inserted_here_p): Ditto.
(clear_syscall_counts): New.
(_initialize_breakpoint): Install it as inferior_exit observer.
* exec.h: Include "progspace.h".
(exec_bfd, exec_bfd_mtime): New defines.
(exec_close): Declare.
* exec.c: Include "gdbthread.h" and "progspace.h".
(exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete.
(using_exec_ops): New.
(exec_close_1): Rename to exec_close, and make public.
(exec_close): Rename to exec_close_1, and adjust all callers. Add
description. Remove target sections and close executables from
all program spaces.
(exec_file_attach): Add comment.
(add_target_sections): Check on `using_exec_ops' to check if the
target should be pushed.
(remove_target_sections): Only unpush the target if there are no
more target sections in any symbol space.
* gdbcore.h: Include "exec.h".
(exec_bfd, exec_bfd_mtime): Remove declarations.
* frame.h (get_frame_program_space, get_frame_address_space)
(frame_unwind_program_space): Declare.
* frame.c (struct frame_info) <pspace, aspace>: New fields.
(create_sentinel_frame): Add program space argument. Set the
pspace and aspace fields of the frame object.
(get_current_frame, create_new_frame): Adjust.
(get_frame_program_space): New.
(frame_unwind_program_space): New.
(get_frame_address_space): New.
* stack.c (print_frame_info): Adjust.
(print_frame): Use the frame's program space.
* gdbthread.h (any_live_thread_of_process): Declare.
* thread.c (any_live_thread_of_process): New.
(switch_to_thread): Switch the program space as well.
(restore_selected_frame): Don't warn if trying to restore frame
level 0.
* inferior.h: Include "progspace.h".
(detach_fork): Declare.
(struct inferior) <removable, aspace, pspace>
<vfork_parent, vfork_child, pending_detach>
<waiting_for_vfork_done>: New fields.
<terminal_info>: Remove field.
<data, num_data>: New fields.
(register_inferior_data, register_inferior_data_with_cleanup)
(clear_inferior_data, set_inferior_data, inferior_data): Declare.
(exit_inferior, exit_inferior_silent, exit_inferior_num_silent)
(inferior_appeared): Declare.
(find_inferior_pid): Typo.
(find_inferior_id, find_inferior_for_program_space): Declare.
(set_current_inferior, save_current_inferior, prune_inferiors)
(number_of_inferiors): Declare.
(inferior_list): Declare.
* inferior.c: Include "gdbcore.h" and "symfile.h".
(inferior_list): Make public.
(delete_inferior_1): Always delete thread silently.
(find_inferior_id): Make public.
(current_inferior_): New.
(current_inferior): Use it.
(set_current_inferior): New.
(restore_inferior): New.
(save_current_inferior): New.
(free_inferior): Free the per-inferior data.
(add_inferior_silent): Allocate per-inferior data.
Call inferior_appeared.
(delete_threads_of_inferior): New.
(delete_inferior_1): Adjust interface to take an inferior pointer.
(delete_inferior): Adjust.
(delete_inferior_silent): Adjust.
(exit_inferior_1): New.
(exit_inferior): New.
(exit_inferior_silent): New.
(exit_inferior_num_silent): New.
(detach_inferior): Adjust.
(inferior_appeared): New.
(discard_all_inferiors): Adjust.
(find_inferior_id): Make public. Assert pid is not zero.
(find_inferior_for_program_space): New.
(have_inferiors): Check if we have any inferior with pid not zero.
(have_live_inferiors): Go over all pushed targets looking for
process_stratum.
(prune_inferiors): New.
(number_of_inferiors): New.
(print_inferior): Add executable column. Print vfork parent/child
relationships.
(inferior_command): Adjust to cope with not running inferiors.
(remove_inferior_command): New.
(add_inferior_command): New.
(clone_inferior_command): New.
(struct inferior_data): New.
(struct inferior_data_registration): New.
(struct inferior_data_registry): New.
(inferior_data_registry): New.
(register_inferior_data_with_cleanup): New.
(register_inferior_data): New.
(inferior_alloc_data): New.
(inferior_free_data): New.
(clear_inferior_data): New.
(set_inferior_data): New.
(inferior_data): New.
(initialize_inferiors): New.
(_initialize_inferiors): Register "add-inferior",
"remove-inferior" and "clone-inferior" commands.
* objfiles.h: Include "progspace.h".
(struct objfile) <pspace>: New field.
(symfile_objfile, object_files): Don't declare.
(ALL_PSPACE_OBJFILES): New.
(ALL_PSPACE_OBJFILES_SAFE): New.
(ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust.
(ALL_PSPACE_SYMTABS): New.
(ALL_PRIMARY_SYMTABS): Adjust.
(ALL_PSPACE_PRIMARY_SYMTABS): New.
(ALL_PSYMTABS): Adjust.
(ALL_PSPACE_PSYMTABS): New.
* objfiles.c (object_files, symfile_objfile): Delete.
(struct objfile_sspace_info): New.
(objfiles_pspace_data): New.
(objfiles_pspace_data_cleanup): New.
(get_objfile_pspace_data): New.
(objfiles_changed_p): Delete.
(allocate_objfile): Set the objfile's program space. Adjust to
reference objfiles_changed_p in pspace data.
(free_objfile): Adjust to reference objfiles_changed_p in pspace
data.
(objfile_relocate): Ditto.
(update_section_map): Add pspace argument. Adjust to iterate over
objfiles in the passed in pspace.
(find_pc_section): Delete sections and num_sections statics.
Adjust to refer to program space's objfiles_changed_p. Adjust to
refer to sections and num_sections store in the objfile's pspace
data.
(objfiles_changed): Adjust to reference objfiles_changed_p in
pspace data.
(_initialize_objfiles): New.
* linespec.c (decode_all_digits, decode_dollar): Set the sal's
program space.
* source.c (current_source_pspace): New.
(get_current_source_symtab_and_line): Set the sal's program space.
(set_current_source_symtab_and_line): Set current_source_pspace.
(select_source_symtab): Ditto. Use ALL_OBJFILES.
(forget_cached_source_info): Iterate over all program spaces.
* symfile.c (clear_symtab_users): Adjust.
* symmisc.c (print_symbol_bcache_statistics): Iterate over all
program spaces.
(print_objfile_statistics): Ditto.
(maintenance_print_msymbols): Ditto.
(maintenance_print_objfiles): Ditto.
(maintenance_info_symtabs): Ditto.
(maintenance_info_psymtabs): Ditto.
* symtab.h (SYMTAB_PSPACE): New.
(struct symtab_and_line) <pspace>: New field.
* symtab.c (init_sal): Clear the sal's program space.
(find_pc_sect_symtab): Set the sal's program space. Switch thread
and space.
(append_expanded_sal): Add program space argument. Iterate over
all program spaces.
(expand_line_sal): Iterate over all program spaces. Switch
program space.
* target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New.
(struct target_ops) <to_thread_address_space>: New field.
(target_thread_address_space): Define.
* target.c (target_detach): Only remove breakpoints from the
inferior we're detaching.
(target_thread_address_space): New.
* defs.h (initialize_progspace): Declare.
* top.c (gdb_init): Call it.
* solist.h (struct so_list) <sspace>: New field.
* solib.h (struct program_space): Forward declare.
(solib_name_from_address): Adjust prototype.
* solib.c (so_list_head): Replace with a macro referencing the
program space.
(update_solib_list): Set the so's program space.
(solib_name_from_address): Add a program space argument and adjust.
* solib-svr4.c (struct svr4_info) <pid>: Delete field.
<interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low>
<interp_plt_sect_high>: New fields.
(svr4_info_p, svr4_info): Delete.
(solib_svr4_sspace_data): New.
(get_svr4_info): Rewrite.
(svr4_sspace_data_cleanup): New.
(open_symbol_file_object): Adjust.
(svr4_default_sos): Adjust.
(svr4_fetch_objfile_link_map): Adjust.
(interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low)
(interp_plt_sect_high): Delete.
(svr4_in_dynsym_resolve_code): Adjust.
(enable_break): Adjust.
(svr4_clear_solib): Revert bit that removed the svr4_info here,
and reinstate clearing debug_base, debug_loader_offset_p,
debug_loader_offset and debug_loader_name.
(_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't
install an inferior_exit observer anymore.
* printcmd.c (struct display) <pspace>: New field.
(display_command): Set the display's sspace.
(do_one_display): Match the display's sspace.
(display_uses_solib_p): Ditto.
* linux-fork.c (detach_fork): Moved to infrun.c.
(_initialize_linux_fork): Moved "detach-on-fork" command to
infrun.c.
* infrun.c (detach_fork): Moved from linux-fork.c.
(proceed_after_vfork_done): New.
(handle_vfork_child_exec_or_exit): New.
(follow_exec_mode_replace, follow_exec_mode_keep)
(follow_exec_mode_names, follow_exec_mode_string)
(show_follow_exec_mode_string): New.
(follow_exec): New. Reinstate the mark_breakpoints_out call.
Remove shared libraries before attaching new executable. If user
wants to keep the inferior, keep it.
(displaced_step_fixup): Adjust to pass an address space to the
breakpoints module.
(resume): Ditto.
(clear_proceed_status): In all-stop mode, always clear the proceed
status of all threads.
(prepare_to_proceed): Adjust to pass an address space to the
breakpoints module.
(proceed): Ditto.
(adjust_pc_after_break): Ditto.
(handle_inferior_event): When handling a process exit, switch the
program space to the inferior's that had exited. Call
handle_vfork_child_exec_or_exit. Adjust to pass an address space
to the breakpoints module. In non-stop mode, when following a
fork and detach-fork is off, also resume the other branch. Handle
TARGET_WAITKIND_VFORK_DONE. Set the program space in sals.
(normal_stop): Prune inferiors.
(_initialize_infrun): Install the new "follow-exec-mode" command.
"detach-on-fork" moved here.
* regcache.h (get_regcache_aspace): Declare.
* regcache.c (struct regcache) <aspace>: New field.
(regcache_xmalloc): Clear the aspace.
(get_regcache_aspace): New.
(regcache_cpy): Copy the aspace field.
(regcache_cpy_no_passthrough): Ditto.
(get_thread_regcache): Fetch the thread's address space from the
target, and store it in the regcache.
* infcall.c (call_function_by_hand): Set the sal's pspace.
* arch-utils.c (default_has_shared_address_space): New.
* arch-utils.h (default_has_shared_address_space): Declare.
* gdbarch.sh (has_shared_address_space): New.
* gdbarch.h, gdbarch.c: Regenerate.
* linux-tdep.c: Include auxv.h, target.h, elf/common.h.
(linux_has_shared_address_space): New.
(_initialize_linux_tdep): Declare.
* arm-tdep.c (arm_software_single_step): Pass the frame's address
space to insert_single_step_breakpoint.
* arm-linux-tdep.c (arm_linux_software_single_step): Pass the
frame's pspace to breakpoint functions.
* cris-tdep.c (crisv32_single_step_through_delay): Ditto.
(cris_software_single_step): Ditto.
* mips-tdep.c (deal_with_atomic_sequence): Add frame argument.
Pass the frame's pspace to breakpoint functions.
(mips_software_single_step): Adjust.
(mips_single_step_through_delay): Adjust.
* rs6000-aix-tdep.c (rs6000_software_single_step): Adjust.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust.
* solib-irix.c (enable_break): Adjust to pass the current frame's
address space to breakpoint functions.
* sparc-tdep.c (sparc_software_single_step): Ditto.
* spu-tdep.c (spu_software_single_step): Ditto.
* alpha-tdep.c (alpha_software_single_step): Ditto.
* record.c (record_wait): Adjust to pass an address space to the
breakpoints module.
* fork-child.c (fork_inferior): Set the new inferior's program and
address spaces.
* inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program
and address spaces.
(inf_ptrace_attach): Set the inferior's program and address spaces.
* linux-nat.c: Include "solib.h".
(linux_child_follow_fork): Manage parent and child's program and
address spaces. Clone the parent's program space if necessary.
Don't wait for the vfork to be done here. Refuse to resume if
following the vfork parent while leaving the child stopped.
(resume_callback): Don't resume a vfork parent.
(linux_nat_resume): Also check for pending events in the
lp->waitstatus field.
(linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE
events to the core.
(stop_wait_callback): Don't wait for SIGSTOP on vfork parents.
(cancel_breakpoint): Adjust.
* linux-thread-db.c (thread_db_wait): Don't remove thread event
breakpoints here.
(thread_db_mourn_inferior): Don't mark breakpoints out here.
Remove thread event breakpoints after mourning.
* corelow.c: Include progspace.h.
(core_open): Set the inferior's program and address spaces.
* remote.c (remote_add_inferior): Set the new inferior's program
and address spaces.
(remote_start_remote): Update address spaces.
(extended_remote_create_inferior_1): Don't init the thread list if
we already debugging other inferiors.
* darwin-nat.c (darwin_attach): Set the new inferior's program and
address spaces.
* gnu-nat.c (gnu_attach): Ditto.
* go32-nat.c (go32_create_inferior): Ditto.
* inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto.
* monitor.c (monitor_open): Ditto.
* nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto.
* procfs.c (do_attach): Ditto.
* windows-nat.c (do_initial_windows_stuff): Ditto.
* inflow.c (inferior_process_group)
(terminal_init_inferior_with_pgrp, terminal_inferior,
(terminal_ours_1, inflow_inferior_exit, copy_terminal_info)
(child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust
to use per-inferior data instead of inferior->terminal_info.
(inflow_inferior_data): New.
(inflow_new_inferior): Delete.
(inflow_inferior_data_cleanup): New.
(get_inflow_inferior_data): New.
* mi/mi-interp.c (mi_new_inferior): Rename to...
(mi_inferior_appeared): ... this.
(mi_interpreter_init): Adjust.
* tui/tui-disasm.c: Include "progspace.h".
(tui_set_disassem_content): Pass an address space to
breakpoint_here_p.
* NEWS: Mention multi-program debugging support. Mention new
commands "add-inferior", "clone-inferior", "remove-inferior",
"maint info program-spaces", and new option "set
follow-exec-mode".
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* observer.texi (new_inferior): Rename to...
(inferior_appeared): ... this.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/testsuite/
* gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork".
* gdb.base/foll-exec.exp: Adjust to expect a process id before
"Executing new program".
* gdb.base/foll-fork.exp: Adjust to spell out "follow-fork".
* gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being
left listed after having been killed.
* gdb.base/attach.exp: Adjust to spell out "symbol-file".
* gdb.base/maint.exp: Adjust test.
* Makefile.in (ALL_SUBDIRS): Add gdb.multi.
* gdb.multi/Makefile.in: New.
* gdb.multi/base.exp: New.
* gdb.multi/goodbye.c: New.
* gdb.multi/hangout.c: New.
* gdb.multi/hello.c: New.
* gdb.multi/bkpt-multi-exec.c: New.
* gdb.multi/bkpt-multi-exec.exp: New.
* gdb.multi/crashme.c: New.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* gdb.texinfo (Inferiors): Rename node to ...
(Inferiors and Programs): ... this. Mention running multiple
programs in the same debug session.
<info inferiors>: Mention the new 'Executable' column if "info
inferiors". Update examples. Document the "add-inferior",
"clone-inferior", "remove-inferior" and "maint info
program-spaces" commands.
(Process): Rename node to...
(Forks): ... this. Document "set|show follow-exec-mode".
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* linux-nat.c (linux_child_follow_fork): If we're staying attached
to the child process, enable event reporting on it. Don't handle
checkpoints here. Instead, add the child fork to the lwp thread
and inferior lists without clobbering the previous inferior. Let
the thread_db layer learn about a new child process, even if
following the parent.
(linux_nat_switch_fork): Delete lwps of the current inferior only,
instead of clearing the whole list. Use thread_change_ptid to
give the core the illusion the new checkpoint is still the same
inferior. Clear the register cache.
(linux_handle_extended_wait): Handle checkpoints here.
(linux_multi_process): Turn on.
* linux-fork.c (struct fork_info) <pc>: Remove field.
(init_fork_list): Do not delete the checkpoint from the inferior
list (it is not there).
(fork_load_infrun_state): Don't switch inferior_ptid here. Pass
the new checkpoint's ptid to linux_nat_switch_fork.
(fork_save_infrun_state): Make static. Don't stop the pc field of
fork_info, it's gone.
(linux_fork_mourn_inferior): Don't delete the checkpoint from the
inferior list, it's not there.
(linux_fork_detach): Ditto.
(delete_fork_command): Replace mention of fork/checkpoint by
checkpoint only.
(detach_fork_command): Likewise. Don't delete the checkpoint from
the inferior list.
(info_forks_command): Adjust.
(restore_detach_fork): Delete.
(checkpointing_pid): New.
(linux_fork_checkpointing_p): New.
(save_detach_fork): Delete.
(checkpoint_command): Delete temp_detach_fork. Don't remove
breakpoints, that's a nop. Store the pid of the process we're
checkpointing, and use make_cleanup_restore_integer to restore it.
Don't reinsert breakpoints here.
(process_command, fork_command): Delete.
(restart_command): Update comments to only mention checkpoints,
not forks.
(_initialize_linux_fork): Delete "fork", "process", "info forks"
commands.
* linux-fork.h (fork_save_infrun_state, fork_list): Delete
declarations.
(linux_fork_checkpointing_p): Declare.
* cli/cli-cmds.c (killlist): New.
* cli/cli-cmds.h (killlist): Declare.
* gdbcmd.h (killlist): Declare.
* inferior.c: Include "gdbthread.h".
(detach_inferior_command, kill_inferior_command)
(inferior_command): New.
(info_inferiors_command): Allow specifying a specific inferior id.
(_initialize_inferiors): Register "inferior", "kill inferior" and
"detach inferior" commands.
* infcmd.c (_initialize_infcmd): Make "kill" a prefix command.
* gdbthread.h (any_thread_of_process): Declare.
* thread.c (any_thread_of_process): New.
* NEWS: Mention multi-inferior debugging. Mention 'info
inferiors', 'inferior', 'detach inferior' and 'kill inferior' as
new commands.
(Removed commands): New section, mentioning that 'info forks',
'fork', 'process', 'delete fork' and 'detach fork' are now gone.
gdb/testsuite/
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* gdb.base/multi-forks.exp: Only run detach-on-fork tests on
linux. Adjust to use "inferior", "info inferiors", "detach
inferior" and "kill inferior" instead of "restart", "info fork",
"detach fork" and "delete fork".
* gdb.base/ending-run.exp: Spell out "info".
* gdb.base/help.exp: Adjust to use test_prefix_command_help for
the "kill" command.
gdb/doc/
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (Debugging multiple inferiors): Document the
"inferior", "detach inferior" and "kill inferior" commands.
(Debugging Programs with Multiple Processes): Adjust to mention
generic "inferior" commands. Delete mention of "detach fork" and
"delete fork". Cross reference to "Debugging multiple inferiors"
section.
* NEWS: Document inlined function support.
* Makefile.in (SFILES): Add inline-frame.c.
(COMMON_OBS): Add inline-frame.o.
* block.c (contained_in): Rewrite to use lexical nesting.
(block_linkage_function): Skip inlined function blocks.
(block_inlined_p): New.
* block.h (struct block): Update comment.
(block_inlined_p): New prototype.
* blockframe.c (get_frame_block): Handle inlined functions.
(get_frame_function): Do not use block_linkage_function.
(block_innermost_frame): Use get_frame_block and contained_in.
* breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
Skip over inlined functions. Simplify epilogue check.
(bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
Update comments.
(set_momentary_breakpoint): Only accept non-inlined frames.
(watch_command_1): Use frame_unwind_caller_pc and
frame_unwind_caller_id instead of get_prev_frame.
(until_break_command): Likewise. Use get_stack_frame_id.
* buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
* dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
* dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
(read_func_scope, new_symbol): Likewise. Handle arguments specially
for inlined functions without call site information.
(inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
(die_specification): Treat DW_AT_abstract_origin as a specification.
(read_type_die): Handle DW_TAG_inlined_subroutine.
* frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
* frame.c (fprint_frame_id): Print inline depth.
(fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
(skip_inlined_frames, get_stack_frame_id): New.
(frame_unwind_caller_id): Use skip_inlined_frames.
(frame_id_inlined_p): New.
(frame_id_eq): Make the logic match the comments. Add inline_depth
check.
(frame_id_inner): Handle inlined functions.
(frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
(frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
(get_prev_frame_1): Check for inline frames. Split out frame
allocation to get_prev_frame_raw.
(get_prev_frame_raw): New function.
(get_prev_frame): Handle inline frames.
(get_frame_pc): Use frame_unwind_pc.
(get_frame_address_in_block): Skip inlined frames on both sides.
(pc_notcurrent): Delete.
(find_frame_sal): Rewrite to handle inline call sites. Use
get_frame_address_in_block.
(deprecated_update_frame_pc_hack): Make static.
* frame.h: Update comments.
(struct frame_id): Add inline_depth.
(enum frame_type): Add INLINE_FRAME.
(frame_id_inlined_p, get_stack_frame_id): New prototypes.
* gdbthread.h (struct thread_info): Add step_stack_frame_id field.
* infcmd.c (set_step_frame): New function.
(step_once): Use set_step_frame. Handle inlined functions.
(until_next_command): Use set_step_frame.
(finish_backward), finish_forward): Use get_stack_frame_id.
(finish_command): Support inlined functions.
* inferior.h (set_step_info): New prototype.
* infrun.c (RESUME_ALL): Use minus_one_ptid.
(clear_proceed_status): Clear step_stack_frame_id.
(init_wait_for_inferior): Call clear_inline_frame_state.
(init_execution_control_state): Make static.
(set_step_info): New function.
(init_thread_stepping_state): Do not set the symtab or line here.
(stepped_in_from): New function.
(handle_inferior_event): Handle inlined functions. Use set_step_info.
(insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
(struct inferior_status): Add step_stack_frame_id.
(save_inferior_status, restore_inferior_status): Save and restore
step_stack_frame_id.
* inline-frame.c, inline-frame.h: New files.
* minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
* regcache.c (regcache_write_pc): Call reinit_frame_cache.
* s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
* stack.c (frame_show_address): New.
(print_frame_info, print_frame): Use it.
(find_frame_funname): Use get_frame_function. Handle inlined blocks.
(frame_info): Mark inlined functions.
(backtrace_command_1): Use get_current_user_frame.
(print_frame_local_vars, print_frame_label_vars): Update comments.
(return_command): Refuse inlined functions.
* symtab.c (lookup_symbol_aux_local): Stop at inlined function
boundaries.
(find_function_start_sal): Avoid inlined functions.
(completion_list_add_fields): New function.
(default_make_symbol_completion_list): Use it. Use block_static_block
and block_global_block. Check for inlined functions.
(skip_prologue_using_sal): Avoid line number comparison across
inlining.
* symtab.h (struct symbol): Add is_inlined.
(SYMBOL_INLINED): New.
* target.c (target_resume): Call clear_inline_frame_state.
* valops.c (value_of_variable): Check block_inlined_p.
gdb/doc/
* gdb.texinfo (Debugging Optimized Code): New chapter.
(Compiling for Debugging): Reference it. Move some
text to the new section.
gdb/testsuite/
* gdb.base/break.exp: Add an XFAIL for gcc/36748.
* gdb.cp/annota2.exp: Accept frames-invalid in more places.
* gdb.opt/Makefile.in (EXECUTABLES): Update.
* gdb.opt/clobbered-registers-O2.exp: Update to GPL v3.
* gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp,
gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp,
gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp,
gdb.opt/inline-markers.c: New files.
* lib/gdb.exp (skip_inline_frame_tests): New function.
(skip_inline_var_tests): New function.
Global renaming of find_thread_pid to find_thread_ptid.
* gdbthread.h (find_thread_ptid): Renamed from find_thread_pid.
* thread.c (find_thread_ptid): Renamed from find_thread_pid.
All callers updated.
gdbserver:
Global renaming of find_thread_pid to find_thread_ptid.
* server.h (find_thread_ptid): Renamed from find_thread_pid.
* inferiors.c (find_thread_ptid): Renamed from find_thread_pid.
All callers updated.
(_initialize_inflow): Don't add the "kill" command or clear
inferior_ptid here.
* infcmd.c (kill_command): Moved here from inflow.c.
(_initialize_infcmd): Add the "kill" command here.
(update_global_location_list): Use gdbarch_has_global_breakpoints
instead of gdbarch_has_global_solist and
target_supports_multi_process.
* dicos-tdep.c (dicos_init_abi): Set
gdbarch_has_global_breakpoints.
* gdbarch.sh (has_global_solist): Update comment.
(has_global_breakpoints): New.
* remote.c (remote_start_remote): Use
gdbarch_has_global_breakpoints instead of
gdbarch_has_global_solist.
* target.c (target_detach): Use gdbarch_has_global_breakpoints
instead of gdbarch_has_global_solist.
* infcmd.c (attach_command): Use gdbarch_has_global_solist instead
of target_supports_multi_process.
target_has_stack.
* mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
when there is no thread selected.
(mi_cmd_execute): Don't special case commands that can run without
a valid selected thread.
* top.c (execute_command): Don't special case commands that can
run without a valid selected thread. Use has_stack_frames.
* infcmd.c (ensure_valid_thread): New.
(continue_1, step_1, jump_command, signal_command): Use it.
(detach_command): Error out if there's no selected thread/inferior.
* thread.c (print_thread_info): Allow having no thread selected.
(switch_to_thread): Don't read the PC if there is no current thread.
(do_restore_current_thread_cleanup): Don't record the current
frame if there is no current thread.
(make_cleanup_restore_current_thread): Don't read frame info if
there is no selected thread.
(_initialize_thread): Don't mark commands as
"no_selected_thread_ok".
* frame.c (get_current_frame): Error out if there is no valid
selected thread.
(has_stack_frames): Return false if there is no valid
selected thread.
* cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
"no_selected_thread_ok".
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): Delete.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Delete declaration.
* stack.c (get_selected_block): Use has_stack_frames.
* infcmd.c (notice_new_inferior): New.
* remote.c (remote_add_inferior, remote_add_thread): New.
(notice_new_inferiors): Rename to...
(remote_notice_new_inferior): ... this. Add RUNNING argument.
Use remote_add_thread instead of add_thread, passing it the
RUNNING argument. Add an inferior with remote_add_inferior. If
we just learned about an inferior, call notice_new_inferior.
(record_currthread): Adjust.
(remote_threads_info): Adjust to use remote_notice_new_inferior.
(remote_start_remote, extended_remote_attach_1): Use remote_add_inferior.
(process_stop_reply): Adjust. Call remote_notice_new_inferior
after handling expedited registers and watchpoint state.
(extended_remote_create_inferior_1): Use remote_add_inferior.
* ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
* infcmd.c (finish_command_continuation): Pass '1' for
'print_frame' parameter to the observer.
* infrun.c (normal_stop): Don't print mi-specific information
here. Pass 'stop_print_frame' to the 'print_frame' parameter
of the observer.
* mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
If we need to print frame, and current uiout is not the MI one,
print frame again.
* infcmd.c (signal_command): Do not specify a resume PC.
testsuite/
PR gdb/9346
* gdb.base/interrupt.c (sigint_handler): New.
(main): Install a SIGINT handler if SIGNALS is defined. Exit
on error.
* gdb.base/interrupt.exp: Define SIGNALS unless gdb,nosignals.
Test "signal SIGINT".
* gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
Declare.
* thread.c (finish_thread_state, finish_thread_state_cleanup): New.
* infrun.c (wait_for_inferior, fetch_inferior_event): If an error
is thrown while handling an event, finish the thread state.
(normal_stop): Use finish_thread_state cleanup.
* infcmd.c (run_command_1): If an error is thrown while starting
the inferior, finish the thread state.
Michael Snyder
Joel Brobecker
Tom Tromey
Jan Kratochvil
Pedro Alves
Stan Shebs
Daniel Jacobowitz
Vladimir Prus
Ulrich Weigand
Pierre Muller
Doug Evans
Aleksandar Ristovski
Hui Zhu