target_has_stack.
* mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
when there is no thread selected.
(mi_cmd_execute): Don't special case commands that can run without
a valid selected thread.
* top.c (execute_command): Don't special case commands that can
run without a valid selected thread. Use has_stack_frames.
* infcmd.c (ensure_valid_thread): New.
(continue_1, step_1, jump_command, signal_command): Use it.
(detach_command): Error out if there's no selected thread/inferior.
* thread.c (print_thread_info): Allow having no thread selected.
(switch_to_thread): Don't read the PC if there is no current thread.
(do_restore_current_thread_cleanup): Don't record the current
frame if there is no current thread.
(make_cleanup_restore_current_thread): Don't read frame info if
there is no selected thread.
(_initialize_thread): Don't mark commands as
"no_selected_thread_ok".
* frame.c (get_current_frame): Error out if there is no valid
selected thread.
(has_stack_frames): Return false if there is no valid
selected thread.
* cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
"no_selected_thread_ok".
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): Delete.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Delete declaration.
* stack.c (get_selected_block): Use has_stack_frames.
* gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
Declare.
* thread.c (finish_thread_state, finish_thread_state_cleanup): New.
* infrun.c (wait_for_inferior, fetch_inferior_event): If an error
is thrown while handling an event, finish the thread state.
(normal_stop): Use finish_thread_state cleanup.
* infcmd.c (run_command_1): If an error is thrown while starting
the inferior, finish the thread state.
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* defs.h: Mention ptid_is_pid.
* inferior.h (ptid_is_pid): Declare.
* gdbthread.h (struct thread_info) <stop_requested>: New field.
(set_stop_requested): Declare.
* infcmd.c (interrupt_target_1): Call set_stop_requested.
* infrun.c (clear_proceed_status): Clear stop_requested.
(infrun_thread_stop_requested_callback,
infrun_thread_stop_requested): New.
(handle_inferior_event): If a TARGET_SIGNAL_TRAP is reported on a
thread that had an explicit stop request, pretend we got a
TARGET_SIGNAL_0. Always stop if the thread had an explicit stop
request.
(print_stop_reason): In the SIGNAL_RECEIVED case, if we're not
outputting to MI, and we got a TARGET_SIGNAL_0, print "# Stopped",
instead of mentioning signal 0.
(ptid_is_pid): New.
* thread.c (set_stop_requested): New.
* linux-nat.c (queued_waitpid): Rename to ...
(queued_waitpid_1): ... this. Add `peek' argument. Handle it.
(queued_waitpid): New, as wrapper to queued_waitpid_1.
(push_waitpid): Push the SIGTRAP to the local event queue, to the
kernel's.
(send_sigint_callback): Delete.
(linux_nat_stop_lwp): New.
(linux_nat_stop): Use it.
gdb/doc/
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* observer.texi (thread_stop_requested): New.
gdb/testsuite/
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* lib/mi-support.exp (mi_expect_interrupt): Expect signal 0
instead of SIGINT.
* remote.c (struct remote_state): Add extended and
multi_process_aware fields.
(remote_multi_process_p): New.
(PACKET_vKill): New.
(record_currthread): Use thread_change_ptid. Notice new
inferiors.
(set_thread, remote_thread_alive): Use write_ptid.
(write_ptid, read_ptid): New.
(remote_current_thread, remote_threads_extra_info): Use them.
(remote_threads_info): Likewise. Detect new inferiors.
(remote_start_remote): Add inferior to inferior list.
(remote_multi_process_feature): New.
(remote_protocol_features): Add "multiprocess" feature.
(remote_query_supported): Pass "multiprocess+" as supported
features.
(remote_open_1): Clear multi_process_aware. Set extended
accordingly.
(remote_detach_1): Detach current process. Use extended packet
format for extended-remote multi-process. Detach process from the
inferior list. Only mourn after printing output.
(extended_remote_attach_1): Add process to the inferior list.
(remote_vcont_resume): Use write_ptid to pass the thread ids.
(remote_wait): Use read_ptid. Implement the extended
multi-process extension format of the 'W' and 'X' reply packets.
Remove exited inferiors from inferior list.
(remote_xfer_memory): Set general thread.
(remote_vkill): New.
(extended_remote_kill): New.
(remote_mourn_1): Discard all inferiors.
(select_new_thread_callback): New.
(extended_remote_mourn_1): If there are more processes to debug,
switch to a thread in another process, and don't pop the target.
(extended_remote_create_inferior_1): Add the new process to the
inferior list.
(remote_stopped_by_watchpoint): Indenting.
(remote_xfer_partial): Set the general thread.
(remote_pid_to_str): If the remote is multi-process aware, print
the process id as well as the thread id.
(remote_get_thread_local_address): Use write_ptid.
(init_extended_remote_ops): Register extended_remote_kill.
(_initialize_remote): Register new packets. Change
magic_null_ptid's, not_sent_ptid's and any_thread_ptid's pid
member to 42000.
* thread.c (thread_change_ptid): Also account for the inferior pid
changing.
* inferior.h (discard_all_inferiors): Declare.
* inferior.c (discard_all_inferiors): New.
* infrun.c (context_switch): Don't save and load infrun state.
(context_switch_to): Delete.
* infcmd.c (proceed_thread_callback): Replace context_switch_to
calls by switch_to_thread calls.
* gdbthread.h (save_infrun_state, load_infrun_state): Delete.
* thread.c (main_thread_state, main_thread_executing): Delete.
(inferior_thread): Delete references to them.
(add_thread_silent): Fix case where we're adding a thread with the
same ptid as an exited thread. Remove references to
context-switching.
(load_infrun_state, save_infrun_state): Delete.
(thread_alive, is_thread_state, any_running, is_executing)
(set_executing): Remove the special handling for targets that
don't register any thread.
(restore_current_thread, thread_apply_all_command)
(do_captured_thread_select): Unconditionally call
switch_to_thread.
* mi/mi-main.c (mi_cmd_execute): Check for exited threads.
Call switch_to_thread instead of context_switch_to.
continuations.
* gdbthread.h (struct thread_info): Add comments around
continuations and intermediate_continuations.
(save_infrun_state, load_infrun_state): Delete continuations and
intermediate_continuations arguments.
* infrun.c (fetch_inferior_event): Only call normal_stop if
stop_soon is NO_STOP_QUIETLY.
(context_switch): Don't context-switch the continuations.
* thread.c (clear_thread_inferior_resources): Discard all
continuations of the thread we're clearing.
(save_infrun_state, load_infrun_state): Delete continuations and
intermediate_continuations arguments, and the code referencing
them.
* utils.c: Include "gdbthread.h".
(cmd_continuation, intermediate_continuation): Delete.
(add_continuation): Add thread_info* argument. Install the
continuation on it.
(restore_thread_cleanup): New.
(do_all_continuations_ptid, do_all_continuations_thread_callback):
New.
(do_all_continuations): Reimplement.
(discard_all_continuations_thread_callback,
discard_all_continuations_thread): New.
(discard_all_continuations): Reimplement.
(add_intermediate_continuation): Add thread_info* argument.
Install the continuation on it.
(do_all_intermediate_continuations_thread_callback)
(do_all_intermediate_continuations_thread): New.
(do_all_intermediate_continuations): Reimplement.
(discard_all_intermediate_continuations_thread_callback): New.
(discard_all_intermediate_continuations_thread): New.
(discard_all_intermediate_continuations): Reimplement.
* breakpoint.c (until_break_command): Install the continuation on
the current thread.
* defs.h (cmd_continuation, intermediate_continuation): Delete.
(struct thread_info): Forward declare.
(add_continuation, add_intermediate_continuation): Add
thread_info* argument.
(do_all_continuations_thread, discard_all_continuations_thread)
(do_all_intermediate_continuations_thread)
(discard_all_intermediate_continuations_thread): Declare.
* inf-loop.c (inferior_event_handler): In non-stop only run
continuations on the thread that stopped. In all-stop, run
continuations on all threads.
* infcmd.c (step_once, finish_command): Adjust.
* breakpoint.h (bpstat_do_actions): Remove bpstat* argument.
* breakpoint.c (bpstat_do_actions): Rename to ...
(bpstat_do_actions_1): ... this. Make static. Change return type
to int. Return true if a breakpoint proceeded.
(bpstat_do_actions): New, as wrapper around bpstat_do_actions_1.
(delete_breakpoint): Don't reference the global stop_bpstat; it's
gone.
* gdbthread.h (struct thread_info): Add stop_bpstat.
(save_infrun_state, load_infrun_state): Remove stop_bpstat
argument.
* thread.c (load_infrun_state, save_infrun_state): Remove
stop_bpstat argument, and the code referencing it.
* infcall.c: Include "gdbthread.h".
(call_function_by_hand): Adjust.
* exceptions.c: Include "gdbthread.h".
(throw_exception): Adjust.
* infcmd.c (stop_bpstat): Delete.
(continue_command): In all-stop, set the ignore count on the
thread that reported the stop. In non-stop, set it on the current
thread.
(finish_command_continuation): Adjust.
(program_info): Adjust.
* infrun.c (clear_proceed_status): Adjust.
(context_switch): Don't context-switch stop_bpstat.
(handle_inferior_event): Adjust.
(normal_stop): Adjust.
(save_inferior_status, restore_inferior_status): Adjust.
* inf-loop.c (inferior_event_handler): Remove parameter to
bpstat_do_actions call.
* top.c (command_loop): Remove parameter to bpstat_do_actions
call. Call it unconditionally.
* event-top.c (command_handler): Ditto.
* python/python.c (execute_gdb_command): Ditto.
* gdbthread.h (find_thread_id): Declare.
* thread.c (find_thread_id): Make non-static.
* mi/mi-main.c (mi_cmd_execute): Switch to the right
thread and frame, if necessary.
* mi/mi-parse.c (mi_parse): Handle --thread and --frame.
* mi/mi-parse.h (strcut mi_parse): New fields thread and frame.
* thread.c (enum thread_state): New.
(thread_state main_thread_running): Delete, in favor of...
(thread_state main_thread_state): ... this. Update throughout.
(clear_thread_inferior_resources): New, split from free_thread.
(free_thread): Call clear_thread_inferior_resources.
(init_thread_list): Set main thread to stopped state.
(add_thread_silent): Take care of PTID reuses.
(delete_thread): If deleting inferior_ptid or a thread with
refcount > 0, mark it as exited, but still keep it in the list.
Only notify of thread exits, if we haven't done so yet.
(iterate_over_threads): Make it safe to delete threads while
iterating over them.
(do_captured_list_thread_ids): Don't account for exited threads.
(thread_alive): Check for the THREAD_EXITED state, and don't set
ptid to -1 on exited threads.
(set_running): Update to account for extra possible states.
(is_thread_state): New.
(is_stopped, is_exited): New.
(is_running): Implement in terms of is_thread_state.
(any_running): Update.
(print_thread_info): Update. Account for exited threads. Don't
warn about missed frame restoring here, its done in the cleanup.
(switch_to_thread): Don't read from a thread that has gone.
(restore_current_thread): In non-stop mode, do a full context
switch.
(restore_selected_frame): Add a frame_level argument. Rewrite.
(struct current_thread_cleanup): Add selected_frame_level and
was_stopped members.
(do_restore_current_thread_cleanup): Check if thread was stopped
and still is, and if the target has registers, stack and memory
before restoring the selected frame. Don't delete the cleanup
argument here.
(restore_current_thread_cleanup_dtor): New.
(make_cleanup_restore_current_thread): Remove all arguments.
Rewrite.
(thread_apply_all_command): Update. Prune threads.
(thread_apply_command): Update.
(thread_command): Account for currently selected exited thread.
(do_captured_thread_select): Check for a running thread. Prune
threads.
(_initialize_thread): Make "info threads", "thread", "thread
apply", and "thread apply all" appliable without a selected thread.
* gdbthread.h (struct thread_info): Replace running_ by state_.
Add refcount.
(is_exited, is_stopped): Declare.
(make_cleanup_restore_current_thread): Remove all arguments.
* infrun.c: Include "event-top.h".
(fetch_inferior_event): In non-stop mode, restore selected thread
and frame after handling the event and running breakpoint
commands. Display GDB prompt if needed.
(normal_stop): In non-stop mode, don't print thread switching
notice.
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): New.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): New.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Declare.
* cli/cli-cmds.c: Set "pwd", "help", "info", "show" as
no-selected-thread ok.
* top.c (execute_command): Check for non no-selected-thread-ok
commands.
* linux-nat.c (struct saved_ptids, threads_to_delete)
(record_dead_thread, prune_lwps): Delete.
(exit_lwp): Unconditionally delete thread.
(linux_nat_resume): Remove prune_lwps call.
* infcmd.c (proceed_thread_callback): Check if !is_stopped instead
of is_running. Adjust to make_cleanup_restore_current_thread
interface change.
* mi/mi-main.c (mi_cmd_execute): Only allow a few commands if the
selected thread has exited.
* inf-loop.c (inferior_event_handler): Don't display the prompt
here.
* varobj.c (c_value_of_root): Update.
* defs.h (make_cleanup_dtor): Declare.
* utils.c (make_cleanup_dtor): New.
* Makefile.in (infrun.o): Depend on $(event_top_h).
* infrun.c (resume): In non-stop mode, always resume just one
thread.
(proceed): Don't call prepare_to_proceed in non-stop mode.
(fetch_inferior_event): In non-stop mode, switch context before
handling the event.
(error_is_running, ensure_not_running): New.
(handle_inferior_event): In non-stop mode: Mark only the event
thread as stopped. Require that the target module manages adding
threads to the thread list. Assert that there isn't a
deferred_step_ptid set. Don't switch to infwait_thread_hop_state.
(normal_stop): Only mark not-running if inferior hasn't exited.
In non-stop mode, only mark the event thread.
* thread.c:Include "cli/cli-decode.h".
(print_thread_info): Don't read from a running thread.
Output "(running)" if thread is running.
(switch_to_thread): Don't read stop_pc if thread is executing.
(do_restore_current_thread_cleanup): Don't write to a running
thread.
(thread_apply_all_command): Don't read from a running thread. In
non-stop mode, do a full context-switch instead of just switching
threads.
(thread_apply_command): In non-stop mode, do a full context-switch
instead of just switching threads.
(do_captured_thread_select): Likewise. Inform user if selected
thread is running.
(_initialize_thread): Mark "info threads" and "thread" and
async_ok.
* inf-loop.c (inferior_event_handler): In non-stop mode, don't
unregister the target from the event loop.
* infcmd.c (continue_command, step_1, jump_command)
(signal_command): Ensure the selected thread isn't running.
(interrupt_target_command): In non-stop mode, interrupt only the
selected thread.
* inferior.h (error_is_running, ensure_not_running): Declare.
* target.h (struct target_ops): Add ptid argument to the to_stop
member.
(target_stop): Add ptid_t argument.
* target.c (update_current_target): Add ptid argument to to_stop's
type.
(debug_to_stop): Add ptid_t argument.
(debug_to_rcmd): Set to_stop_ptid.
* remote.c (remote_stop): Add ptid_t argument.
(async_remote_interrupt): Add inferior_ptid to target_stop.
* inf-ptrace.c (inf_ptrace_stop): Add ptid argument.
* Makefile.in (thread.o): Depend on $(cli_decode_h).
* gdbthread.h: Remove unneeded forward declarations.
Include "inferior.h".
(struct thread_info): Add continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi and stop_signal members.
(save_infrun_state): Add continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat parameters.
(load_infrun_state): Add continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat parameters.
* thread.c (load_infrun_state): In non-stop mode, load
continuations, intermediate_continuations, proceed_to_finish,
step_over_calls, stop_step, step_multi and stop_signal.
(save_infrun_state): Store continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat.
(save_infrun_state): Store continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat.
(free_thread): Clear The thread's stop_bpstat.
* inferior.h (context_switch_to): Declare.
* infrun.c (ecss): New global.
(context_switch): Context switch continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat.
(wait_for_inferior): Use global ecss.
(async_ecss, async_ecs): Delete.
(fetch_inferior_event): Use global ecss.
(context_switch_to): New.
* top.c (execute_command): In non-stop, only check if the current
thread is running, in all-stop, check if there's any thread
running.
* breakpoint.c (bpstat_remove_breakpoint): New.
(bpstat_remove_breakpoint_callback): New.
(delete_breakpoint): Clear the stop_bpstats of all threads.
* mi/mi-main.c (mi_cmd_execute): In non-stop, only check if the
current thread is running, in all-stop, check if there's any
thread running.
* Makefile.in (gdbthread_h): Depend on $(inferior_h).
* inferior.h (target_executing): Delete.
* gdbthread.h (struct thread_info): Add executing_ field.
(set_executing, is_executing): New.
* thread.c (main_thread_executing): New.
(init_thread_list): Clear it and also main_thread_running.
(is_running): Return false if target has no execution.
(any_running, is_executing, set_executing): New.
* top.c: Include "gdbthread.h".
(target_executing): Delete.
(execute_command): Replace target_executing check by any_running.
* event-top.c: Include "gdbthread.h".
(display_gdb_prompt, command_handler): Replace target_executing by
is_running.
* inf-loop.c: Include "gdbthread.h". Don't mark as not executing
here. Replace target_executing by is_running.
* infrun.c (handle_inferior_event): Mark all threads as
not-executing.
* linux-nat.c (linux_nat_resume): Don't mark thread as executing
here.
* stack.c (get_selected_block): Return null if inferior is
executing.
* target.c (target_resume): Mark resumed ptid as executing.
* breakpoint.c (until_break_command): Replace target_executing
check by is_executing.
* remote.c (remote_async_resume): Don't mark inferior as executing
here.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Replace target_executing
by any_running.
* mi/mi-main.c (mi_cmd_exec_interrupt, mi_cmd_execute)
(mi_execute_async_cli_command): Replace target_executing by
is_running.
* frame.c (get_current_frame): Error out if the current thread is
executing.
(has_stack_frames): New.
(get_selected_frame, deprecated_safe_get_selected_frame): Check
has_stack_frames.
* Makefile.in (event-top.o, frame.o, inf-loop.o, top.o): Depend on
$(gdbthread_h).
* gdbthread.h (add_thread_with_info): New.
* linux-thread-db.c: Add some documentation.
(GET_LWP, GET_PID, GET_THREAD, is_lwp, is_thread, BUILD_LWP): Delete.
(struct private_thread_info): Remove th_valid and ti_valid.
Replace ti with tid.
(thread_get_info_callback): Do not add TID to the new ptid. Do
not cache th or ti.
(thread_db_map_id2thr, lwp_from_thread): Delete functions.
(thread_from_lwp): Assert that the LWP is set. Do not add TID to the
new PTID.
(attach_thread): Handle an already-existing thread. Use
add_thread_with_info. Cache the th and tid.
(detach_thread): Verify that private was set. Remove verbose
argument and printing. Update caller.
(thread_db_detach): Do not adjust inferior_ptid.
(clear_lwpid_callback, thread_db_resume, thread_db_kill): Delete.
(check_event, find_new_threads_callback): Do not add TID to the new PTID.
(thread_db_wait): Do not use lwp_from_thread.
(thread_db_pid_to_str): Use the cached TID.
(thread_db_extra_thread_info): Check that private is set.
(same_ptid_callback): Delete.
(thread_db_get_thread_local_address): Do not use it or check
is_thread. Check that private is set. Assume that the thread
handle is already cached.
(init_thread_db_ops): Remove to_resume and to_kill.
* thread.c (add_thread_with_info): New.
(add_thread): Use it.
* linux-nat.c (find_thread_from_lwp): Delete.
(exit_lwp): Do not use it. Check print_thread_events. Print before
deleting the thread.
(GET_PID, GET_LWP, BUILD_LWP, is_lwp): Move to...
* linux-nat.h (GET_PID, GET_LWP, BUILD_LWP, is_lwp): ...here.
* inf-ttrace.c (inf_ttrace_wait): Use print_thread_events and
printf_unfiltered for thread exits.
* procfs.c (procfs_wait): Likewise.
2008-03-21 Pedro Alves <pedro@codesourcery.com>
* gdb.threads/fork-child-threads.exp: Test next over fork.
* gdbthread.h (print_thread_info): Declare.
* thread.c (print_thread_info): New, extracted
from info_threads_command and adjusted to
work for CLI and MI.
(info_threads_command): Use print_thread_info.
* Makefile.in: Update dependencies.
* mi/mi-cmds.c (mi_cmds): Specify a handler
for -thread-info.
* mi/mi-cmds.h (mi_cmd_thread_info): Declare.
* mi/mi-main.c (mi_cmd_thread_info): New.
(mi_cmd_list_features): Include 'thread-info'.
* thread.c (add_thread_silent): Renamed
from add_thread.
(print_thread_events): New variable definition.
(show_print_thread_events): New function.
(_initialize_thread): Add "set print thread-events" and
"show print thread-events" commands.
(add_thread): Announce new thread.
* gdbthread.h (add_thread_silent): Declare.
(print_thread_events): New variable declaration.
* inf-ttrace.c (inf_ttrace_wait): Don't
inform about new thread, as add_thread is always
called too, and will take care of that.
* infrun.c (handle_inferior_event): Likewise.
* procfs.c (procfs_wait): Likewise.
* remote.c (remote_currthread): Likewise.
* sol-thread.c (sol_thread_wait): Likewise.
* win32-nat.c (get_win32_debug_event): Likewise.
* linux-thread-db.c (attach_thread): Likewise.
Remove the verbose parameter.
(check_event): Make detach_thread be verbose
only if print_thread_events is set.
* linux-nat.c (lin_lwp_attach_lwp): Don't inform
about new thread. This is called only from
linux-thread-db.c:attach_thread, which will take care.
Remove the verbose parameter.
* linux-nat.h (lin_lwp_attach_lwp): Adjust prototype.
* infrun.c (trap_expected): Rename
to stepping_over_breakpoint. Document.
(stepping_past_breakpoint): Remove.
(stepping_past_breakpoint_ptdi): Renamed
to deferred_step_ptid.
(struct execution_control_state): Rename
the another_trap field to stepping_over_breakpoint.
(struct inferior_status): Rename the trap_expected
field to stepping_over_breakpoint.
(clear_proceed_status, proceed)
(init_execution_control_state, context_switch)
(handle_inferior_event, currently_stepping)
(keep_going, save_inferior_status)
(restore_inferior_status, prepare_to_proceed): Adjust.
* gdbthread.h (struct thread_info): Rename the
trap_expected field to stepping_over_breakpoint.
* thread.c (load_infrun_state, save_infrun_state):
Adjust.