d6c2da5446
move version.in from gdb/common back to gdb
...
This reverts part of the earlier version.in change. It moves
version.in back to the gdb directory. This works around the CVS bug
we've found.
gdb
* Makefile.in (version.c): Use version.in, not
common/version.in.
* common/create-version.sh: Likewise.
* common/version.in: Move...
* version.in: ...here.
gdb/doc
* Makefile.in (version.subst): Use version.in, not
common/version.in.
* gdbint.texinfo (Versions and Branches, Releasing GDB):
Likewise.
gdb/gdbserver
* Makefile.in (version.c): Use version.in, not
common/version.in.
sim/common
* Make-common.in (version.c): Use version.in, not
common/version.in.
* create-version.sh: Likewise.
sim/ppc:
* Make-common.in (version.c): Use version.in, not
common/version.in.
2013-06-28 18:59:51 +00:00
e5823f1cb5
Move comment on the 'stepping over resolver' mechanism to the internals manual.
...
This whole comment is now a bit out of place. I looked into moving it
to handle_inferior_event, close to where in_solib_dynsym_resolve_code
is used, but then there are 3 such places. I then looked at
fragmenting it, pushing bits closer to the definitions of
in_solib_dynsym_resolve_code and gdbarch_skip_solib_resolver, but then
we'd lose the main advantage which is the overview. In the end, I
realized this can fit nicely as internals manual material.
This could possibly be a subsection of a new "run control", or "source
stepping" or "stepping" or some such a bit more general section, but
we can do that when we have more related content... Even the "single
stepping" section is presently empty...
gdb/doc/
2013-06-27 Pedro Alves <palves@redhat.com>
* gdbint.texinfo (Algorithms) <Stepping over runtime loader
dynamic symbol resolution code>: New section, based on infrun.c
comment.
gdb/
2013-06-27 Pedro Alves <palves@redhat.com>
* infrun.c: Remove comment describing the 'stepping over runtime
loader dynamic symbol resolution code' mechanism; moved to
gdbint.texinfo.
2013-06-27 19:17:27 +00:00
92dcb9ffb9
* gdbint.texinfo (Versions and Branches): Use common/version.in.
...
Update.
2013-06-26 16:04:05 +00:00
a0743c90c7
Upload tsv earlier in remote_start_remote
...
In extended-remote, when GDB connects the target, but target is not
running, the TSVs are not uploaded. When GDB attaches to a process,
the TSVs are not uploaded either. However, GDBserver has some
builtin or predefined TSV to upload, such as $trace_timestamp. This
bug causes $trace_timestamp is never uploaded.
gdb/
2013-06-25 Yao Qi <yao@codesourcery.com>
* remote.c (remote_start_remote): Move code to upload tsv
earlier.
gdb/testsuite/
2013-06-25 Yao Qi <yao@codesourcery.com>
* boards/native-extended-gdbserver.exp: Set board_info
'gdb,predefined_tsv'.
* boards/native-gdbserver.exp: Likewise.
* boards/native-stdio-gdbserver.exp: Likewise.
* gdb.server/ext-attach.exp: Load trace-support.exp. Check
uploaded TSVs if target supports tracing.
* gdb.trace/tsv.exp: Check uploaded TSVs if target supports
tracing and target has predefined tsv.
gdb/doc/
2013-06-25 Yao Qi <yao@codesourcery.com>
* gdbint.texinfo (Testsuite): Document 'gdb,predefined_tsv'.
2013-06-25 13:01:28 +00:00
2874cb8393
[doco] Document the XML format used for AIX shared lib support.
...
gdb/doc/ChangeLog:
* gdbint.texinfo (Native Debugging): Add "AIX Shared Library
Support" subsection documenting the XML format used to transfer
shared library info on AIX.
2013-05-08 05:50:47 +00:00
4d1eb6b4d2
Reimplement shared library support on ppc-aix...
...
... using the target_so_ops framework.
gdb/ChangeLog:
* target.h (TARGET_OBJECT_AIX_LIBRARIES): New target_object enum.
* features/library-list-aix.dtd: New file.
* solib-aix.h, solib-aix.c: New file.
* rs6000-aix-tdep.c: #include "solib.h" and "solib-aix.h".
(rs6000_find_toc_address_hook): Delete.
(rs6000_push_dummy_call): Rewrite code setting the TOC value.
(rs6000_aix_init_osabi): Register solib_aix_so_ops.
* rs6000-nat.c: Remove "xcoffsolib.h" include. Include
"xml-utils.h".
(map_vmap, vmap_exec, vmap_ldinfo, add_vmap, objfile_symbol_add)
(vmap_symtab, fixup_breakpoints): Delete.
(rs6000_xfer_shared_libraries): New function.
(rs6000_xfer_partial): Add TARGET_OBJECT_AIX_LIBRARIES handling.
(vmap_secs, bss_data_overlap, vmap_add_symbols): Delete.
(xcoff_relocate_symtab, xcoff_relocate_core): Delete.
(rs6000_ptrace_ldinfo, rs6000_core_ldinfo)
(rs6000_xfer_shared_library): New function.
(find_toc_address): Delete.
(_initialize_rs6000_nat): Do not set rs6000_find_toc_address_hook.
* rs6000-tdep.h (rs6000_find_toc_address_hook): Remove.
* xcoffread.c (record_minimal_symbol): Reloate symbol address
before creating minimal symbol. Adjust function description
accordingly.
(scan_xcoff_symtab): Replace call to
prim_record_minimal_symbol_and_info by call to
record_minimal_symbol.
(xcoff_symfile_offsets): Reimplement mostly as a wrapper
around default_symfile_offsets.
* configure.tgt: Add solib-aix.o to gdb_target_obs for
powerpc-aix targets.
* config/rs6000/nm-rs6000.h: Delete.
* config/powerpc/aix.mh (NAT_FILE): Delete.
(NATDEPFILES): Remove xcoffsolib.o.
* Makefile.in (XMLFILES): Add library-list-aix.dtd.
(ALL_TARGET_OBS): Add solib-aix.o.
(HFILES_NO_SRCDIR): Remove xcoffsolib.h and
config/rs6000/nm-rs6000.h. Add solib-aix.h.
(ALLDEPFILES): Add solib-aix.c. Remove xcoffsolib.c.
* xcoffsolib.h, xcoffsolib.c: Delete.
* solib.c (reload_shared_libraries): Remove reference to
SOLIB_CREATE_INFERIOR_HOOK.
* breakpoint.c (handle_solib_event): Remove reference to SOLIB_ADD.
(disable_breakpoints_in_shlibs): Remove reference to PC_SOLIB.
(momentary_bkpt_re_set): Replace SOLIB_ADD by solib_add in
comment.
* corelow.c (deprecated_core_resize_section_table): Delete.
* exec.c: Remove include of xcoffsolib.h".
(map_vmap, vmap): Delete.
(exec_close_1): Remove references to vmap.
(exec_file_attach): Remove vmap handling code, and reference
to DEPRECATED_IBM6000_TARGET.
(bfdsec_to_vmap): Delete.
(exec_files_info): Remove block of code handling VMAP.
* infcmd.c (post_create_inferior): Remove reference to
SOLIB_CREATE_INFERIOR_HOOK and SOLIB_ADD.
* infrun.c (follow_exec): Remove reference to
SOLIB_CREATE_INFERIOR_HOOK.
* stack.c (print_frame): Remove reference to PC_SOLIB.
* solib-dsbt.c (dsbt_current_sos): Adjust comment.
(dsbt_relocate_main_executable): Likewise.
* solib-frv.c (frv_current_sos): Likewise.
gdb/doc/ChangeLog:
* gdbint.texinfo (Algorithms): Remove entries documenting
DEPRECATED_IBM6000_TARGET, SOLIB_ADD, and
SOLIB_CREATE_INFERIOR_HOOK.
2013-05-06 14:15:50 +00:00
5360976e5a
s/signness/signedness in gdbint.texinfo.
...
"signedness" is more typical.
gdb/doc/
2013-04-19 Pedro Alves <palves@redhat.com>
* gdbint.texinfo (Misc Guidelines) <Compiler Warnings>: Write
"signedness" instead of "signness".
2013-04-19 18:41:32 +00:00
bd3f3b5535
Enable -Wpointer-sign by default.
...
This enables -Wpointer-sign by default.
I've checked that --enable-targets=all builds fine with the following
as --host, on x86_64 Fedora 17 --build:
x86_64 GNU/Linux
i386 GNU/Linux
i386 MinGW-w64
i386 msdos/djgpp
OK?
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* configure.ac (build_warnings): Replace -Wno-pointer-sign with
-Wpointer-sign.
* configure: Regenerate.
gdb/doc
2013-04-19 Pedro Alves <palves@redhat.com>
* gdbint.texinfo (Misc Guidelines) <Compiler Warnings>: Replace
-Wno-pointer-sign text with text on -Wpointer-sign.
2013-04-19 18:32:54 +00:00
28e7fd6234
Update years in copyright notice for the GDB files.
...
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
2013-01-01 06:33:28 +00:00
0dfd2fad8b
* gdbint.texinfo (Function prototypes): Require use of "extern"
...
modifier for function prototypes in headers.
2012-12-22 17:51:11 +00:00
3d745be3fc
gdb/
...
Code cleanup.
* skip.c (skip_function_command, skip_file_command, skip_info): Remove
unused forward declarations.
(skip_file_command): Make variables symtab and filename targets const.
Use proper 0 vs. NULL constant everywhere.
(skip_function_command): Use proper 0 vs. NULL constant everywhere.
Include empty line after declarations. Use GNU spacing in a comment.
Do not use strlen for end of string check.
(skip_info): Use proper 0 vs. NULL constant everywhere. Add column 5
comments.
(skip_enable_command, skip_disable_command, skip_delete_command)
(add_skiplist_entry): Use proper 0 vs. NULL constant everywhere.
(function_pc_is_marked_for_skip): Make variable filename target const.
Use proper 0 vs. NULL constant everywhere. Fix GNU non-compliant
comment formatting.
(skip_re_set): Add empty line after function comment. Use proper 0 vs.
NULL constant everywhere. Include empty line after declarations. Make
variable symtab target const. Do not use strlen for end of string
check.
gdb/doc/
* gdbint.texinfo (Coding Standards) (C Usage): New rule for 0 vs. NULL.
2012-12-16 19:00:04 +00:00
74a0d9f6a5
gdb/
...
* configure.ac (CC_HAS_LONG_LONG): Replace by AC_MSG_ERROR.
* defs.h (LONGEST, ULONGEST): Remove conditionalization for
CC_HAS_LONG_LONG.
* dwarf2-frame.c (DW64_CIE_ID): Likewise.
* dwarf2read.c (extract_cu_value): Remove the function.
(create_cus_from_index_list): Make the return type void, inline the
extract_cu_value caller, include new gdb_static_assert.
(create_cus_from_index): Make the return type void, update the function
comment, update the create_cus_from_index_list caller.
(create_signatured_type_table_from_index): Make the return type void,
inline the extract_cu_value caller, include new gdb_static_assert.
(dwarf2_read_index): Update the create_cus_from_index and
create_signatured_type_table_from_index caller.
* printcmd.c (ui_printf): Remove conditionalizations for
CC_HAS_LONG_LONG.
* config.in: Regenerate.
* configure: Regenerate.
gdb/doc/
* gdbint.texinfo (Host Definition): Remove CC_HAS_LONG_LONG.
2012-12-09 18:39:59 +00:00
121c73f33a
gdb/doc/
...
* gdbint.texinfo (Defining Other Architecture Features): Clarify *pcptr
encoding for gdbarch_breakpoint_from_pc, bp_addr for
gdbarch_push_dummy_call and bp_addr for gdbarch_push_dummy_code.
2012-09-13 17:35:35 +00:00
b583003e10
* event-top.c (sigwinch_token, handle_sigwinch): Remove.
...
(async_init_signals): Update.
* utils.c (init_page_info): Don't use SIGWINCH_HANDLER.
(SIGWINCH_HANDLER_BODY): Remove.
gdb/doc
* gdbint.texinfo (Host Definition): Remove documentation for
SIGWINCH_HANDLER and SIGWINCH_HANDLER_BODY.
2012-08-22 17:31:45 +00:00
dc1039df63
gdb/doc/
...
* gdbint.texinfo (Debugging GDB): In section
'Debugging @value{GDBN} with itself' change .gdbinit for gdb-gdb.gdb.
Mention also gdb-gdb.py.
2012-08-07 16:49:38 +00:00
055855a460
Separate the indices in gdbint.texinfo into 2 nodes, to avoid file-name clashes.
...
* gdbint.texinfo: Remove @syncodeindex directives that put all the
indices into a single node "Index". Instead, join function and
variable indices into a single index, separate from the concept
index. Requested in
http://sourceware.org/ml/gdb-patches/2012-07/msg00146.html .
(Top): Update the top-level menu: instead of one "Index" there are
now separate entries "Concept Index" and "Function and Variable
Index".
(Concept Index, Function and Variable Index): New nodes.
(Index): Node deleted.
2012-07-12 07:56:50 +00:00
984359d2e1
Fix Texinfo usage issues. From Patrice Dumas <pertusus@free.fr>.
...
* gdb.texinfo (Summary): Add a link to "Free Documentation".
(Free Documentation): Add @node line.
(Continuing and Stepping) <advance location>: Use @item instead of
@itemx.
(Reverse Execution) <set exec-direction reverse>: Use @item instead of
@itemx.
(Embedded Processors): Put the link to "PA" to its correct place,
according to document structure.
(Python API): Put the link to "Lazy Strings In Python" to its
correct place.
(Index): Use @@ in @tex block to get a literal @.
* gdbint.texinfo: Fix the @subtitle line.
* stabs.texinfo (Top): Put the link to "Symbol Types Index" to its
correct place.
2012-06-15 09:21:37 +00:00
f02e2b19dd
gdb/doc
...
* gdbint.texinfo (Testsuite): New section `Board settings'.
2012-04-25 10:59:10 +00:00
168997566e
* NEWS: Mention symbol-reloading has been deleted.
...
* symfile.c (symbol_reloading): Delete.
(show_symbol_reloading): Delete.
(_initialize_symfile): Delete set/show symbol-reloading.
doc/
* gdb.texinfo (Help): Change apropos example to use "alias" instead
of "reload".
(Symbols): Delete docs for set/show symbol-reloading.
* gdbint.texinfo (Defining Other Architecture Features): Delete
SYMBOL_RELOADING_DEFAULT.
* refcard.tex: Delete reference to symbol-reloading.
testsuite/
* gdb.base/default.exp: Delete tests for symbol-reloading.
* gdb.base/help.exp: Ditto.
* gdb.base/setshow.exp: Ditto.
* gdb.base/gdb_history: Delete references to symbol-reloading.
2012-03-13 21:02:40 +00:00
0ee339bc47
gdb/doc/
...
* gdbint.texinfo (Coding Standards): Require braces for two lines of
code.
2012-01-13 14:31:55 +00:00
ce1b17c4a3
Document new procedure for updating copyright years
...
We now use a different script to perform the update. This patch
updates the procedure in our documentation
gdb/doc/ChangeLog:
* gdbint.texinfo (Start of New Year Procedure): Update
to replace use of copyright.sh by use of copyright.py.
2012-01-05 09:41:03 +00:00
0b30217134
Copyright year update in most files of the GDB Project.
...
gdb/ChangeLog:
Copyright year update in most files of the GDB Project.
2012-01-04 08:17:56 +00:00
217bff3e3f
gdb/
...
Remove the gdbtui binary.
* .gitignore (/gdbtui): Remove.
* Makefile.in (TUI): Remove.
(SUBDIR_TUI_OBS): Remove tui-main.o.
(SUBDIR_TUI_SRCS): Remove tui/tui-main.c.
(all-tui, install-tui, uninstall-tui, $(TUI)$(EXEEXT), clean-tui)
(tui-main.o): Remove.
(all_object_files): Remove tui-main.o.
* NEWS: New note for the gdbtui removal.
* configure: Rebuilt.
* configure.ac: No longer add all-tui, clean-tui, install-tui and
uninstall-tui to CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL and
CONFIG_UNINSTALL respectively.
* gdb.c (main): Remove args.interpreter_p initialization.
* main.c (captured_main): Set INTERPRETER_P directly by INTERP_CONSOLE.
* main.h (struct captured_main_args): Remove interpreter_p.
* tui/tui-main.c: Remove.
gdb/doc/
Remove the gdbtui binary.
* all-cfg.texi (GDBTUI): Remove.
* gdb.texinfo (Mode Options): Remove the GDBTUI reference.
(TUI): Remove GDBTUI pindex. Remove the GDBTUI reference.
* gdbint.texinfo (Testsuite): Replace `gdbtui' by `gdb -tui'.
2012-01-02 02:28:59 +00:00
13ac8d2c29
gdb/doc/
...
* gdbint.texinfo (Testsuite): Describe KFAIL and XFAIL in Writing
tests.
gdb/testsuite/
* gdb.cp/ptype-cv-cp.exp (ptype v_volatile_const_my_int): Replace KFAIL
by XFAIL.
* gdb.cp/static-method.exp (info addr A::func())
(list static-method.cc:xxx::(anonymous namespace)::A::func)
(list 'static-method.cc:xxx::(anonymous namespace)::A::func')
(list 'static-method.cc':'xxx::(anonymous namespace)::A::func')
(list static-method.cc:'xxx::(anonymous namespace)::A::func'): Likewise.
* gdb.cp/temargs.exp (test value of F in k2_m, test type of F in k3_m)
(test value of F in k3_m): Likewise.
* gdb.python/py-type.exp (python print ttype.template_argument(2)):
Likewise.
2011-12-19 13:37:34 +00:00
7a9dd1b270
gdb
...
* windows-tdep.c (windows_xfer_shared_library):
* windows-nat.c (get_module_name, windows_make_so):
* v850-tdep.c (v850_handle_pushm):
* utils.c (null_cleanup, gdb_realpath):
* ui-out.c (get_next_header):
* tracepoint.c (clear_traceframe_info):
* symtab.c (lookup_symtab):
* serial.h (struct serial_ops):
* mipsread.c (read_alphacoff_dynamic_symtab):
* infcmd.c (print_return_value):
* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address):
* f-exp.y (parse_number):
* exceptions.c (catch_exceptions):
* dummy-frame.c (dummy_frame_this_id):
* defs.h (struct cleanup):
* breakpoint.c (disable_breakpoints_in_unloaded_shlib):
* arm-tdep.c (arm_push_dummy_call):
* amd64-tdep.h (amd64_collect_xsave):
* amd64-tdep.c (amd64_collect_xsave):
* alpha-tdep.c (alpha_heuristic_frame_unwind_cache):
* README (typing): Remove duplicate words.
* cli/cli-decode.c (lookup_cmd_composition): Add comma.
* infrun.c (siginfo_value_read): Fix typo.
* solib-frv.c (frv_fdpic_find_global_pointer): Likewise.
* top.c (source_line_number): Add comma.
gdb/doc
* gdbint.texinfo (Register Information Functions): Remove
duplicate "the".
* gdb.texinfo (Emacs): Remove duplicate "to".
(GDB/MI Variable Objects): Remove duplicate "the".
(General Query Packets): Likewise.
gdb/testsuite
* gdb.mi/mi-nsmoribund.exp:
* gdb.hp/gdb.objdbg/objdbg01.exp:
* gdb.base/structs.exp (test_struct_returns):
* gdb.base/call-sc.exp (test_scalar_returns):
* gdb.base/bigcore.exp: Remove duplicate words.
gdb/gdbserver
* win32-low.c (handle_load_dll): Remove duplicate "the".
2011-04-19 18:04:11 +00:00
cef35b0f37
* gdbint.texinfo (Formatting): Mention some formatting guidelines
...
for casts and unary operators.
2011-02-04 19:10:12 +00:00
449444484c
Update the copyright year for most remaining files in GDB
2011-01-05 05:09:55 +00:00
a0e0ffdffa
* gdbint.texinfo (Misc Guidelines): Renamed from Coding.
...
All references updated. Correct sections marked as subsections.
(Coding Standards): New chapter. Move the coding standard related
subsections here. Add section on Python coding standards.
2010-10-20 22:53:36 +00:00
e4c0cfae7e
2010-06-21 Stan Shebs <stan@codesourcery.com>
...
* gdb.texinfo: Add explicit @node and @appendix for GFDL.
* annotate.texinfo: Ditto.
* gdbint.texinfo: Ditto.
* stabs.texinfo: Ditto.
2010-06-22 05:03:19 +00:00
4f5d9f0781
2010-06-21 Stan Shebs <stan@codesourcery.com>
...
* gdb.texinfo: Relicense under GFDL version 1.3.
* annotate.texinfo: Relicense under GFDL version 1.3.
* gdbint.texinfo: Relicense under GFDL version 1.3.
* stabs.texinfo: Relicense under GFDL version 1.3.
* fdl.texi: Update to version 1.3.
2010-06-21 16:24:59 +00:00
aaf4119b64
* gdbint.texinfo (Coding): Add subsection on command names.
2010-06-03 19:06:59 +00:00
c25c4a8b0e
gdb/
...
* cli/cli-cmds.h (error_no_arg): Remove. Move the comment ...
* command.h (error_no_arg): ... here. Remove NORETURN, change
ATTR_NORETURN to ATTRIBUTE_NORETURN.
* defs.h (NORETURN, ATTR_NORETURN): Remove.
(perror_with_name, verror, error, error_stream, vfatal, fatal)
(internal_verror, internal_error, nomem): Remove NORETURN, change
ATTR_NORETURN to ATTRIBUTE_NORETURN.
* exceptions.c (throw_exception, deprecated_throw_reason, throw_verror)
(throw_vfatal, throw_error): Remove NORETURN.
(throw_it): Remove NORETURN, change ATTR_NORETURN to ATTRIBUTE_NORETURN.
* exceptions.h (throw_exception, throw_verror, throw_vfatal)
(throw_error, deprecated_throw_reason): Remove NORETURN, change
ATTR_NORETURN to ATTRIBUTE_NORETURN.
* linespec.c (cplusplus_error): Remove NORETURN, change ATTR_NORETURN
to ATTRIBUTE_NORETURN for prototype, for the definition only remove
NORETURN.
* remote-mips.c (mips_error): Change NORETURN to ATTRIBUTE_NORETURN.
* remote-sim.c (gdb_os_error): Change ATTR_NORETURN to
ATTRIBUTE_NORETURN.
* target.c (tcomplain): Likewise.
* target.h (noprocess): Remove NORETURN, change ATTR_NORETURN to
ATTRIBUTE_NORETURN.
* utils.c (verror, error, vfatal, fatal, error_stream, internal_verror)
(internal_error, perror_with_name, nomem): Remove NORETURN.
* xml-support.h (gdb_xml_error): Change ATTR_NORETURN to
ATTRIBUTE_NORETURN.
gdb/doc/
* gdbint.texinfo (Host Definition): Remove items NORETURN and
ATTR_NORETURN.
2010-05-02 23:52:14 +00:00
b7da9e9f5f
PR breakpoints/11531.
...
* config/i386/nm-i386sol2.h (CANNOT_STEP_HW_WATCHPOINTS): Remove
macro definition and related comment.
* infrun.c (CANNOT_STEP_HW_WATCHPOINTS): Remove macro.
(resume): Remove code and comment related to this macro.
doc ChangeLog entry:
* gdbint.texinfo (CANNOT_STEP_HW_WATCHPOINTS): Remove explanation
of macro deleted from GDB code.
2010-04-26 12:01:44 +00:00
ccefe4c44c
gdb
...
* xcoffread.c: Include psymtab.h.
(xcoff_sym_fns): Update.
* symtab.h (struct partial_symbol): Remove.
(PSYMBOL_DOMAIN, PSYMBOL_CLASS): Remove.
(struct partial_symtab): Remove.
(PSYMTAB_TO_SYMTAB): Remove.
(lookup_partial_symbol, lookup_partial_symtab, find_pc_psymtab)
(find_pc_sect_psymtab): Remove.
(find_pc_sect_symtab_via_partial): Declare.
(find_pc_psymtab, find_pc_sect_psymbol, psymtab_to_symtab)
(find_main_psymtab): Remove.
(find_main_filename): Declare.
(fixup_psymbol_section): Remove.
(fixup_section): Declare.
* symtab.c: Include psymtab.h.
(lookup_symtab): Use lookup_symtab method.
(lookup_partial_symtab): Remove.
(find_pc_sect_psymtab_closer): Remove.
(find_pc_sect_psymtab): Remove.
(find_pc_sect_symtab_via_partial): New function.
(find_pc_psymtab, find_pc_sect_psymbol, find_pc_psymbol): Remove.
(fixup_section): No longer static.
(fixup_psymbol_section): Remove.
(lookup_symbol_aux): Use lookup_symbol_aux_quick.
(lookup_global_symbol_from_objfile): Likewise.
(lookup_symbol_aux_psymtabs): Remove.
(lookup_symbol_aux_quick): New function.
(lookup_symbol_global): Use lookup_symbol_aux_quick.
(lookup_partial_symbol): Remove.
(basic_lookup_transparent_type_quick): New function.
(basic_lookup_transparent_type): Use it.
(find_main_psymtab): Remove.
(find_main_filename): New function.
(find_pc_sect_symtab): Use find_pc_sect_symtab method.
(find_line_symtab): Use expand_symtabs_with_filename method.
(output_partial_symbol_filename): New function.
(sources_info): Use map_partial_symbol_filenames.
(struct search_symbols_data): New type.
(search_symbols_file_matches): New function.
(search_symbols_name_matches): Likewise.
(search_symbols): Use expand_symtabs_matching method.
(struct add_name_data): Rename from add_macro_name_data.
(add_macro_name): Update.
(add_partial_symbol_name): New function.
(default_make_symbol_completion_list): Use
map_partial_symbol_names.
(struct add_partial_symbol_name): New type.
(maybe_add_partial_symtab_filename): New function.
(make_source_files_completion_list): Use
map_partial_symbol_filenames.
(expand_line_sal): Use expand_symtabs_with_filename method.
* symmisc.c: Include psymtab.h.
(print_objfile_statistics): Use print_stats method.
(dump_objfile): Use dump method.
(dump_psymtab, maintenance_print_psymbols)
(maintenance_info_psymtabs, maintenance_check_symtabs)
(extend_psymbol_list): Remove.
* symfile.h (struct quick_symbol_functions): New struct.
(struct sym_fns) <qf>: New field.
(sort_pst_symbols): Remove.
(increment_reading_symtab): Declare.
* symfile.c: Include psymtab.h.
(compare_psymbols, sort_pst_symbols): Remove.
(psymtab_to_symtab): Remove.
(increment_reading_symtab): New function.
(symbol_file_add_with_addrs_or_offsets): Use expand_all_symtabs
method.
(set_initial_language): Use find_main_filename.
(allocate_psymtab, discard_psymtab, cashier_psymtab): Remove.
(free_named_symtabs): Remove unused code.
(start_psymtab_common, add_psymbol_to_bcache)
(append_psymbol_to_list, add_psymbol_to_list, init_psymbol_list):
Remove.
* stack.c: Include psymtab.h, symfile.h.
(backtrace_command_1): Use find_pc_sect_symtab_via_partial.
* source.h (psymtab_to_fullname): Don't declare.
* source.c: Include psymtab.h.
(select_source_symtab): Use find_last_source_symtab method.
(forget_cached_source_info): Use forget_cached_source_info
method.
(find_and_open_source): No longer static.
(psymtab_to_fullname): Remove.
* somread.c: Include psymtab.h.
(som_sym_fns): Update.
* psympriv.h: New file.
* psymtab.h: New file.
* psymtab.c: New file.
* objfiles.h: (ALL_OBJFILE_PSYMTABS): Remove.
(ALL_PSYMTABS, ALL_PSPACE_PSYMTABS): Likewise.
* objfiles.c: Include psymtab.h.
(objfile_relocate1): Use relocate method.
(objfile_has_partial_symbols): Use has_symbols method.
* mipsread.c: Include psymtab.h.
(ecoff_sym_fns): Update.
* mi/mi-cmd-file.c: Include psymtab.h.
(print_partial_file_name): New function.
(mi_cmd_file_list_exec_source_files): Use
map_partial_symbol_filenames.
* mdebugread.c: Include psympriv.h.
* machoread.c: Include psympriv.h.
(macho_sym_fns): Update.
* m2-exp.y (yylex): Use lookup_symtab.
* elfread.c: Include psympriv.h.
(elf_sym_fns): Update.
* dwarf2read.c: Include psympriv.h.
* dbxread.c: Include psympriv.h.
(aout_sym_fns): Update.
* cp-support.c: Include psymtab.h.
(read_in_psymtabs): Remove.
(make_symbol_overload_list_qualified): Use
expand_symtabs_for_function method.
* coffread.c: Include psympriv.h.
(coff_sym_fns): Update.
* blockframe.c: Include psymtab.h.
(find_pc_partial_function): Use find_pc_sect_symtab method.
* ada-lang.h (ada_update_initial_language): Update.
* ada-lang.c: Include psymtab.h.
(ada_update_initial_language): Remove 'main_pst' argument.
(ada_lookup_partial_symbol): Remove.
(struct ada_psym_data): New type.
(ada_add_psyms): New function.
(ada_add_non_local_symbols): Use map_ada_symtabs method.
(struct add_partial_datum): New type.
(ada_add_partial_symbol_completions): New function.
(ada_make_symbol_completion_list): Use map_partial_symbol_names.
(ada_exception_support_info_sniffer): Update.
* Makefile.in (SFILES): Add psymtab.c.
(COMMON_OBS): Add psymtab.o.
(HFILES_NO_SRCDIR): Add psymtab.h, psympriv.h.
gdb/doc
* gdbint.texinfo (Symbol Handling): Update.
2010-03-10 18:20:08 +00:00
629d6a470a
* gdbint.texinfo (Getting Started): Fix @node.
...
(Debugging GDB): Likewise.
2010-02-19 19:14:38 +00:00
c09529e5f8
Document new gdb_test_timeout global variable.
...
* gdbint.texinfo (Testsuite): New section "Testsuite Configuration",
documenting the gdb_test_timeout variable.
2010-02-13 04:57:11 +00:00
1be008824d
testsuite/
...
* lib/gdb.exp (INTERNAL_GDBFLAGS): Don't override value provided by
user.
doc/
* gdbint.texinfo (Testsuite): Document INTERNAL_GDBFLAGS.
2010-02-05 21:51:38 +00:00
c5f80513ff
* gdbint.texinfo (Testsuite): Add a new section to document the
...
various DejaGnu variables that may be overridden.
2010-02-05 18:30:44 +00:00
e6f3ec5002
Update the "Start of New Year Procedure".
...
* gdbint.texinfo: Add the list of files that need to be updated
manually. Minor reformatting.
2010-01-01 11:38:33 +00:00
9d2897ad53
Update copyright years in all relevant texinfo documents.
...
* agentexpr.texi: Add 2010 to the list of copyright years.
* annotate.texinfo: Likewise.
* gdb.texinfo: Likewise.
* gdbint.texinfo: Likewise.
* observer.texi: Likewise.
* stabs.texinfo: Likewise.
2010-01-01 07:54:37 +00:00
1eb7cd77da
* gdbint.texinfo, stabs.texinfo: Move the @setchapternewpage
...
and @settitle directives up to help makeinfo find them.
2009-11-07 19:46:57 +00:00
da082f1797
gdb/doc/
...
* gdbint.texinfo (i386_stopped_by_hwbp): Remove.
2009-10-08 13:08:26 +00:00
005ca36a8b
gdb/
...
* frame.c (get_frame_id): Default to outer_frame_id if the this_id
method does not supply an ID. Assert that the result is not
null_frame_id.
(outer_frame_id): New.
(frame_id_p): Accept outer_frame_id.
(frame_id_eq): Allow outer_frame_id to be equal to itself.
(frame_find_by_id): Revert previous local workarounds.
(get_prev_frame_1): Adjust end-of-stack check to test outer_frame_id.
* frame.h (null_frame_id, frame_id_p): Update comments.
(outer_frame_id): Declare.
* infrun.c (handle_inferior_event): Do not treat all steps from the
outermost frame as subroutine calls.
* libunwind-frame.c (libunwind_frame_this_id): Do not clear THIS_ID.
* hppa-tdep.c (hppa_stub_frame_this_id): Likewise.
* ia64-tdep.c (ia64_frame_this_id): Likewise.
(ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id):
Use outer_frame_id instead of null_frame_id.
* amd64obsd-tdep.c (amd64obsd_trapframe_cache): Use outer_frame_id.
* i386obsd-tdep.c (i386obsd_trapframe_cache): Likewise.
* inline-frame.c (inline_frame_this_id): Refuse outer_frame_id.
* thread.c (restore_selected_frame): Update comment and remove
frame_id_p check.
gdb/doc/
* gdbint.texinfo (Unwinding the Frame ID): Reference outer_frame_id.
2009-09-13 16:28:29 +00:00
bc3a0b4d79
Fix confusing sentence about autoconf in gdbint.texinfo.
...
gdb/doc/:
* gdbint.texinfo (Releasing GDB): Fix confusing sentence
about autoconf.
2009-08-26 04:16:38 +00:00
af542c2e31
Cleanups after the update to Autoconf 2.64, Automake 1.11.
...
/:
* README-maintainer-mode: Point directly to upstream locations
for autoconf, automake, libtool, gettext, instead of copies on
sources.redhat.com. Document required versions.
* configure.ac: Do not substitute datarootdir, htmldir,
pdfdir, docdir. Do not process --with-datarootdir,
--with-htmldir, --with-pdfdir, --with-docdir.
* configure: Regenerate.
gdb/:
* CONTRIBUTE: Bump documented Autoconf version.
* configure.ac: Do not substitute datarootdir, htmldir,
pdfdir, docdir. Do not process --with-datarootdir,
--with-htmldir, --with-pdfdir, --with-docdir.
* configure: Regenerate.
gdb/doc/:
* gdbint.texinfo (Releasing GDB): Point to
README-maintainer-mode file for required autoconf version.
* configure.ac: Do not substitute datarootdir, htmldir,
pdfdir, docdir. Do not process --with-datarootdir,
--with-htmldir, --with-pdfdir, --with-docdir.
* configure: Regenerate.
gprof/:
* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(install-pdf-recursive, html__strip_dir, install-html)
(install-html-am, install-html-recursive): Remove.
* Makefile.in: Regenerate.
opcodes/:
* Makefile.am (install-pdf, install-html): Remove.
* Makefile.in: Regenerate.
gas/:
* Makefile.am (install-pdf, install-pdf-recursive, install-html)
(install-html-recursive): Remove.
* Makefile.in: Regenerate.
* doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(html__strip_dir, install-html, install-html-am): Remove.
* doc/Makefile.in: Regenerate.
ld/:
* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(install-pdf-recursive, html__strip_dir, install-html)
(install-html-am, install-html-recursive): Remove.
* Makefile.in: Regenerate.
binutils/:
* Makefile.am (install-pdf, install-pdf-recursive, install-html)
(install-html-recursive): Remove.
* Makefile.in: Regenerate.
* doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(html__strip_dir, install-html, install-html-am): Remove.
* doc/Makefile.in: Regenerate.
bfd/:
* Makefile.am (datarootdir, docdir, htmldor, pdfdir)
(install-pdf, install-pdf-recursive, install-html)
(install-html-recursive): Remove.
* Makefile.in: Regenerate.
bfd/doc/:
* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(html__strip_dir, install-html, install-html-am): Remove.
* Makefile.in: Regenerate.
2009-08-22 17:08:11 +00:00
f5a3328452
* gdbint.texinfo (Testsuite): Document parallel make check.
2009-07-10 19:38:00 +00:00
812f734247
gdb/doc
...
* gdbint.texinfo (Testsuite): Document test transcripts.
gdb/testsuite
* lib/gdb.exp: Handle TRANSCRIPT.
(remote_spawn, remote_close, send_gdb): New procs.
2009-07-10 18:48:41 +00:00
5af949e350
* defs.h (strlen_paddr, paddr, paddr_nz): Remove.
...
(paddress): Add GDBARCH parameter.
* utils.c (strlen_paddr, paddr, paddr_nz): Remove.
(paddress): Add GDBARCH parameter, use it instead of current_gdbarch.
* ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter.
* ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter,
use it instead of current_gdbarch.
Update calls to ui_out_field_core_addr to pass architecture:
* ada-lang.c (print_one_exception): Update.
* breakpoint.c (print_one_breakpoint_location,
print_one_exception_catchpoint): Update.
* disasm.c (dump_insns): Update.
* darwin-nat-info.c (darwin_debug_regions_recurse): Update.
* mi/mi-main.c (mi_cmd_data_read_memory): Update.
* mi/mi-symbol-cmds.c: Include "objfiles.h".
(mi_cmd_symbol_list_lines): Update.
* stack.c (print_frame_info, print_frame): Update.
Update callers of paddress to pass architecture:
* ada-tasks.c (info_task): Update.
* ada-valprint.c (ada_val_print_1): Update.
* annotate.c (annotate_source, annotate_frame_begin): Update.
* breakpoint.c (insert_bp_location, describe_other_breakpoints,
mention): Update.
* cli/cli-cmds.c (edit_command, list_command, print_disassembly):
Update.
* corefile.c (memory_error): Update.
* c-valprint.c (print_function_pointer_address, c_val_print): Update.
* disasm.c (dis_asm_print_address): Update.
* exec.c (print_section_info): Update.
* f-valprint.c (f_val_print): Update.
* infcmd.c: Include "arch-utils.h".
(jump_command, program_info): Update.
* linux-fork.c: Include "arch-utils.h".
(info_forks_command): Update.
* m2-valprint.c (print_function_pointer_address,
print_unpacked_pointer, print_variable_at_address,
m2_val_print): Update.
* m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command):
Update.
* printcmd.c (print_address, print_address_demangle, address_info):
Update.
* p-valprint.c (pascal_val_print): Update.
* source.c: Include "arch-utils.h".
(line_info): Update.
* stack.c (frame_info, print_block_frame_labels): Update.
* symfile.c (add_symbol_file_command, list_overlays_command): Update.
* symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1,
print_symbol, print_partial_symbols, maintenance_info_psymtabs,
maintenance_check_symtabs): Update.
* symtab.c (find_pc_sect_symtab): Update.
* target.c (deprecated_debug_xfer_memory): Update.
* tracepoint.c (scope_info): Update.
* tui/tui-stack.c (tui_make_status_line): Update.
* valprint.c (val_print_string): Update.
Update callers of paddr_nz to use paddress instead (keeping
user-visible output identical):
* alpha-tdep.c (alpha_heuristic_proc_start): Update.
* amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn,
amd64_displaced_step_fixup): Update.
* arch-utils.c (simple_displaced_step_copy_insn): Update.
* auxv.c (fprint_target_auxv): Update.
* breakpoint.c (insert_single_step_breakpoint): Update.
* buildsym.c (finish_block): Update.
* cli/cli-dump.c (restore_section_callback): Update.
* fbsd-nat.c (fbsd_find_memory_regions): Update.
* frame.c (frame_unwind_register_value): Update.
* gcore.c (gcore_create_callback): Update.
* hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update.
* i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm,
i386_record_lea_modrm_addr, i386_record_lea_modrm,
i386_process_record): Update.
* ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id,
ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id,
ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update.
* infrun.c (displaced_step_prepare, displaced_step_fixup,
handle_inferior_event, insert_step_resume_breakpoint_at_sal,
insert_longjmp_resume_breakpoint): Update.
* linux-nat.c (linux_nat_find_memory_regions): Update.
* linux-record.c (record_linux_system_call): Update.
* mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call,
mips_n32n64_push_dummy_call, mips_o32_push_dummy_call,
mips_o64_push_dummy_call): Update.
* monitor.c (monitor_error, monitor_remove_breakpoint): Update.
* record.c (record_arch_list_add_mem, record_wait,
record_xfer_partial): Update.
* remote-mips.c (mips_fetch_word, mips_check_lsi_error,
mips_common_breakpoint): Update.
* remote-sim.c (gdbsim_xfer_inferior_memory): Update.
* rs6000-tdep.c (ppc_displaced_step_fixup): Update.
* solib-som.c (som_current_sos): Update.
* symfile.c (load_progress, generic_load): Update.
* symfile-mem.c (add_vsyscall_page): Update.
* valops.c (value_fetch_lazy): Update.
* windows-tdep.c (windows_xfer_shared_library): Update.
Update callers of paddr_nz to use paddress instead (changing
user-visible output to make it more correct):
* dwarf2loc.c (locexpr_describe_location): Update.
* ia64-tdep.c (ia64_memory_insert_breakpoint,
ia64_memory_remove_breakpoint): Update.
* jv-valprint.c (java_value_print): Update.
* m32c-tdep.c (m32c_m16c_address_to_pointer): Update.
* monitor.c (monitor_read_memory): Update.
Update callers of paddr to use paddress instead (changing
user-visible output to make it more correct):
* arm-tdep.c (arm_push_dummy_call): Update.
* breakpoint.c (insert_bp_location, create_thread_event_breakpoint,
create_breakpoint): Update.
* darwin-nat-info.c (darwin_debug_regions): Update.
* dcache.c (dcache_info): Update.
* dsrec.c (load_srec, make_srec): Update.
* dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program,
dwarf2_frame_cache): Update.
* gcore.c (gcore_copy_callback): Update.
* gnu-nat.c (gnu_xfer_memory): Update.
* mips-linux-nat.c (mips_show_dr): Update.
* monitor.c (monitor_write_memory, monitor_insert_breakpoint,
monitor_remove_breakpoint): Update.
* remote.c (compare_sections_command): Update.
* remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint,
m32r_remove_breakpoint, m32r_insert_watchpoint,
m32r_remove_watchpoint): Update.
* sol-thread.c (info_cb): Update.
* symfile.c (load_progress): Update.
Update callers of paddress or paddr_nz to use hex_string instead
(changes output of internal/error/debug messages only):
* dwarf2read.c (dump_die_shallow): Update.
* frame.c (fprint_field, fprint_frame, frame_pc_unwind,
get_frame_func, create_new_frame): Update.
* hppa-tdep.c (find_unwind_entry, unwind_command): Update.
* ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x,
ia64_get_dyn_info_list): Update.
* maint.c (maintenance_translate_address): Update.
* mi/mi-cmd-var.c (mi_cmd_var_create): Update.
* target.c (target_flash_erase): Update.
Update callers of paddr/paddr_nz to use phex/phex_nz instead,
using an appropriate address size. Remove use of strlen_paddr.
* exec.c (exec_files_info): Update.
* i386-nat.c (i386_show_dr): Update.
* remote.c (remote_flash_erase): Update.
* m32r-rom.c (m32r_load_section): Update.
* monitor.c (monitor_vsprintf, monitor_store_register): Update.
* remote.c (remote_check_symbols, remote_search_memory): Update.
* remote-mips.c (mips_request, mips_common_breakpoint): Update.
* scm-valprint.c (scm_ipruk, scm_scmval_print): Update.
* sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update.
* sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs,
sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs,
sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs,
sh_dsp_show_regs): Update.
* xcoffsolib.c (sharedlibrary_command): Update.
* maint.c (maint_print_section_info): Add ADDR_SIZE parameter.
Use hex_string_custom instead of paddr.
(print_bfd_section_info): Pass address size.
(print_objfile_section_info): Likewise.
* annotate.h (annotate_source): Add GDBARCH parameter.
(annotate_frame_begin): Likewise.
* annotate.c (annotate_source): Add GDBARCH parameter.
(annotate_frame_begin): Likewise.
* source.c (identify_source_line): Update call to annotate_source.
* stack.c (print_frame_info, print_frame): Update call to
annotate_frame_begin.
* breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter.
(create_breakpoint, create_ada_exception_breakpoint): Update call.
* stack.c (print_block_frame_labels): Add GDBARCH parameter.
(print_frame_label_vars): Update call.
* symmisc.c (print_partial_symbols): Add GDBARCH parameter.
(dump_psymtab): Update call to print_partial_symbols.
(struct print_symbol_args): Add GDBARCH member.
(dump_symtab_1): Set print_symbol_args architecture member.
(print_symbol): Use it.
* windows-tdep.h (windows_xfer_shared_library): Add GDBARCH
parameter.
* windows-tdep.c (windows_xfer_shared_library): Likewise.
* i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member.
(core_process_module_section): Pass architecture from cpms_data to
windows_xfer_shared_library.
(windows_core_xfer_shared_libraries): Initialize cmps_data
architecture member.
* windows-nat.c (windows_xfer_shared_libraries): Pass architecture
to windows_xfer_shared_library.
* defs.h (print_address): Add GDBARCH parameter.
* printcmd.c (print_address): Add GDBARCH parameter.
(print_scalar_formatted, do_examine): Update call.
* findcmd.c (find_command): Update call.
* tracepoint.c: Include "arch-utils.h".
(trace_find_line_command): Update call.
* tui/tui-disasm.c (tui_disassemble): Update call.
* value.h (print_address_demangle): Add GDBARCH parameter.
* printcmd.c (print_address_demangle): Add GDBARCH parameter.
* c-valprint.c (print_function_pointer_address, c_val_print):
Update call.
* f-valprint.c (f_val_print): Update call.
* gnu-v3-abi.c (gnuv3_print_method_ptr): Update call.
* jv-valprint.c (java_val_print): Update call.
* m2-valprint.c (print_function_pointer_address, m2_val_print):
Update call.
* p-valprint.c (pascal_val_print): Update call.
* disasm.c (gdb_disassemble_info): Install architecture into
di.application_data field.
testsuite/ChangeLog:
* gdb.threads/tls-shared.exp: Update to locexpr_describe_location
change to prefix TLS offset in hex with 0x.
doc/ChangeLog:
* gdbint.texinfo (Item Output Functions): Update signature
for ui_out_field_core_addr.
2009-07-02 17:21:10 +00:00
a6d9a66e23
* breakpoint.h (struct breakpoint): New member GDBARCH.
...
* breakpoint.c: Include "arch-utils.h".
(set_raw_breakpoint_without_location): Add GDBARCH parameter.
Use it to set breakpoint architecture.
(set_raw_breakpoint): Add GDBARCH parameter.
(create_internal_breakpoint): Likewise.
(create_catchpoint): Likewise.
(create_fork_vfork_event_catchpoint): Likewise.
(create_breakpoint): Likewise.
(create_breakpoints): Likewise.
(break_command_really): Likewise.
(create_ada_exception_breakpoint): Likewise.
Update local callers to pass architecture:
(create_internal_breakpoint): Update.
(create_overlay_event_breakpoint): Update.
(create_longjmp_master_breakpoint): Update.
(create_thread_event_breakpoint): Update.
(create_solib_event_breakpoint): Update.
(create_catchpoint): Update.
(create_fork_vfork_event_catchpoint): Update.
(set_momentary_breakpoint): Update.
(clone_momentary_breakpoint): Update.
(create_breakpoint): Update.
(create_breakpoints): Update.
(break_command_really): Update.
(break_command_1): Update.
(set_breakpoint): Update.
(watch_command_1): Update.
(catch_fork_command_1): Update.
(catch_exec_commnd_1): Update.
(handle_gnu_v3_exceptions): Update.
(create_ada_exception_breakpoint): Update.
(catch_ada_exception_command): Update.
(catch_assert_command): Update.
(trace_command): Update.
* breakpoint.h (struct bp_location): New member GDBARCH.
* breakpoint.c (get_sal_arch): New function.
(set_raw_breakpoint): Set location architecture.
(add_location_to_breakpoint): Likewise.
(clone_momentary_breakpoint): Likewise.
(watch_command_1): Likewise.
(update_watchpoint): Likewise.
(bp_loc_is_permanent): Use location architecture instead of
current_gdbarch.
(adjust_breakpoint_address): Add GDBARCH parameter; use it
instead of current_gdbarch.
Update callers of adjust_breakpoint_address to pass
breakpoint location architecture:
(set_raw_breakpoint): Update.
(watch_command_1): Update.
* tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead
of current_gdbarch.
(add_local_symbols): Add GDBARCH parameter. Pass to collect_symbol.
(encode_actions): Pass tracepoint architecture to add_local_symbols
(encode_actions): Use tracepoint architecture instead of
current_gdbarch. Pass it to add_local_symbols and collect_symbol.
* breakpoint.h (struct breakpoint_ops): Replace last_addr parameter
of print_one callback with last_loc.
* breakpoint.c (print_one_breakpoint_location): Replace last_addr
parameter with last_loc.
(print_one_breakpoint): Likewise.
(do_captured_breakpoint_query): Update call.
(breakpoint_1): Pass last_loc instead of last_addr to
print_one_breakpoint. Pass last location architecture instead of
current_gdbarch to set_next_address.
Update all implementations of the print_one callback:
* breakpoint.c (print_one_catch_fork): Update.
(print_one_catch_vfork): Update.
(print_one_catch_exec): Update.
(print_one_exception_catchpoint): Update.
* ada-lang.c (print_one_exception): Update.
(print_one_catch_exception): Update.
(print_one_catch_exception_unhandled): Update.
(print_one_catch_assert): Update.
* breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS
parameter. Use it instead of gdbarch_addr_bit (current_gdbarch).
(print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it
to print_one_breakpoint_location.
(breakpoint_address_bits): New function.
(do_captured_breakpoint_query): Compute number of address bits to print
and pass it to print_one_breakpoint.
(breakpoint_1): Likewise. Use it instead of current_gdbarch.
* breakpoint.h (create_thread_event_breakpoint): Add GDBARCH.
* breakpoint.c (create_thread_event_breakpoint): Likewise.
Update callers to create_thread_event_breakpoint:
* aix-thread.c (pd_enable): Update.
* linux-thread-db.c (enable_thread_event): Update.
* breakpoint.h (create_solib_event_breakpoint): Add GDBARCH.
* breakpoint.c (create_solib_event_breakpoint): Likewise.
Update callers to create_solib_event_breakpoint:
* solib-frv.c (enable_break, enable_break2): Update.
* solib-pa64.c (pa64_solib_create_inferior_hook): Update.
* solib-som.c (som_solib_create_inferior_hook): Update.
* solib-darwin.c (darwin_solib_create_inferior_hook): Update.
* solib-svr4.c (enable_break): Update.
* breakpoint.h (insert_single_step_breakpoint): Add GDBARCH.
* breakpoint.c (insert_single_step_breakpoint): Likewise.
Update callers to insert_single_step_breakpoint:
* alpha-tdep.c (alpha_software_single_step): Update.
* arm-linux-tdep.c (arm_linux_software_single_step): Update.
* arm-tdep.c (arm_software_single_step): Update.
* cris-tdep.c (cris_software_single_step): Update.
* rs6000-aix-tdep.c (rs6000_software_single_step): Update.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update.
* sparc-tdep.c (sparc_software_single_step): Update.
* spu-tdep.c (spu_software_single_step): Update.
* mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter.
Pass it to insert_single_step_breakpoint.
(mips_software_single_step): Pass architecture to
deal_with_atomic_sequence and insert_single_step_breakpoint.
* breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH.
(deprecated_remove_raw_breakpoint): Likewise.
* breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH.
(deprecated_remove_raw_breakpoint): Likewise.
Update callers to deprecated_insert_raw_breakpoint and
deprecated_remove_raw_breakpoint:
* breakpoint.c (single_step_gdbarch): New static variable.
(insert_single_step_breakpoint): Pass GDBARCH parameter to
deprecated_insert_raw_breakpoint. Store it in single_step_gdbarch.
(remove_single_step_breakpoints): Pass architecture stored in
single_step_gdbarch to deprecated_remove_raw_breakpoint.
* rs6000-nat.c (exec_one_dummy_insn): Update.
* solib-irix.c (enable_break, disable_break): Update.
* procfs.c (procfs_mourn_inferior): Update.
(remove_dbx_link_breakpoint): Update.
* breakpoint.h (set_breakpoint): Add GDBARCH parameter.
(set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
* breakpoint.c (set_breakpoint): Add GDBARCH parameter.
(set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
Update callers to set_breakpoint, set_momentary_breakpoint and
set_momentary_breakpoint_at_pc:
* breakpoint.c (set_momentary_breakpoint_at_pc): Update.
(until_break_command): Update.
* infcall.c (call_function_by_hand): Update.
* infcmd.c (finish_backward, finish_forward): Update.
* infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH
parameter. Pass it to set_momentary_breakpoint.
(insert_longjmp_resume_breakpoint): Add GDBARCH parameter.
Pass it to set_momentary_breakpoint_at_pc.
(handle_inferior_event): Update.
(insert_step_resume_breakpoint_at_frame): Update.
(insert_step_resume_breakpoint_at_caller): Update..
* mi/mi-cmd-break.c: Include "arch-utils.h".
(mi_cmd_break_insert): Update.
* target.h (struct target_ops): Add GDBARCH parameter to
to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint,
and to_remove_hw_breakpoint members.
(target_insert_breakpoint, target_remove_breakpoint,
target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH
parameter, pass to target routine.
(memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH
parameter.
* target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint,
debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add
GDBARCH parameter, pass to target routine.
(update_current_target): Update function signature.
* breakpoint.c (insert_bp_location, remove_breakpoint,
deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint):
Pass architecture to target_ routines.
Update all implementations of the target breakpoint routines to take
GDBARCH parameter and use it instead of GDBARCH as appropriate:
* corelow.c (ignore): Update.
* exec.c (ignore): Update.
* mem-break.c (memory_insert_breakpoint): Update.
(memory_remove_breakpoint): Update.
* monitor.c (monitor_insert_breakpoint): Update.
(monitor_remove_breakpoint): Update.
* record.c (record_insert_breakpoint): Update.
(record_beneath_to_insert_breakpoint): Update.
(record_remove_breakpoint): Update.
(record_beneath_to_remove_breakpoint): Update.
* remote.c (remote_insert_breakpoint): Update.
(remote_remove_breakpoint): Update.
(remote_insert_hw_breakpoint): Update.
(remote_remove_hw_breakpoint): Update.
* remote-m32r-sdi.c (m32r_insert_breakpoint): Update.
(m32r_remove_breakpoint): Update.
* remote-mips.c (mips_insert_breakpoint): Update.
(mips_remove_breakpoint): Update.
* i386-nat.c (i386_insert_hw_breakpoint): Update.
(i386_remove_hw_breakpoint): Update.
* nto-procfs.c (procfs_insert_breakpoint): Update.
(procfs_remove_breakpoint): Update.
(procfs_insert_hw_breakpoint): Update.
(procfs_remove_hw_breakpoint): Update.
doc/ChangeLog:
* gdbint.texi (Examples of Use of @code{ui_out} functions):
Update example code extrated from breakpoint.c.
2009-07-02 17:12:28 +00:00
d1a7880c77
2009-06-07 Pedro Alves <pedro@codesourcery.com>
...
* procfs.h: New.
* proc-utils.h (procfs_first_available): Don't declare here.
* sol-thread.c: Include procfs.h instead of sys/procfs.h and
proc-utils.h.
* procfs.c: Include procfs.h.
(procfs_target): Make it public. Don't register
procfs_can_use_hw_breakpoint here.
(proc_set_watchpoint): Check for PCWATCH or PIOCSWATCH being
defined instead of TARGET_HAS_HARDWARE_WATCHPOINTS.
(procfs_can_use_hw_breakpoint): Remove check of
TARGET_HAS_HARDWARE_WATCHPOINTS.
(procfs_use_watchpoints): Register procfs_can_use_hw_breakpoint
here.
(_initialize_procfs): Don't add the procfs target here.
* i386-sol2-nat.c: Include target.h and procfs.h.
(_initialize_amd64_sol2_nat): Install the procfs target here,
customized with watchpoints support.
* irix5-nat.c: Include target.h.
(_initialize_core_irix5): Rename to ...
(_initialize_irix5_nat): ... this. Install the procfs target
here, customized with watchpoints support.
* alpha-nat.c: Include procfs.h.
(_initialize_core_alpha): Rename to...
(_initialize_alpha_nat): ... this. Install the procfs target
here, customized with watchpoints support.
* sparc-sol2-nat.c: Include target.h and procfs.h.
(_initialize_sparc_sol2_nat): New.
* config/i386/nm-i386sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
* config/sparc/nm-sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
* config/mips/irix5.mh (NAT_FILE): Delete.
* config/mips/irix6.mh (NAT_FILE): Delete.
* config/mips/nm-irix5.h: Delete.
2009-06-07 Pedro Alves <pedro@codesourcery.com>
* gdbint.texinfo (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete all
references.
2009-06-07 22:33:25 +00:00
Tom Tromey
Pedro Alves
Yao Qi
Joel Brobecker
Pierre Muller
Jan Kratochvil
Eli Zaretskii
Doug Evans
Stan Shebs
Ralf Wildenhues
Ulrich Weigand