From Daniel Jacobowitz <drow@mvista.com>
* dbxread.c (dbx_symfile_read): Only reinitialize
the psymbol list if mainline or if both static
and global lists are empty.
* dwarf2read.c (dwarf2_build_psymtabs): Likewise.
* dwarfread.c (dwarf_build_psymtabs): Likewise.
* xcoffread.c (xcoff_initial_scan): Likewise.
* os9kread.c (os9k_symfile_read): Likewise.
(rs6000_in_solib_return_trampoline): Declare.
* rs6000-tdep.c (rs6000_in_solib_return_trampoline): New
function.
(rs6000_skip_trampoline_code): Skip bigtoc fixup code.
* xcoffread.c (read_xcoff_symtab): Perform the ISFCN function
check after the CSECT check rather than before it. Allocate
separate symtabs for CSECTs whose names begin with '@'.
(scan_xcoff_symtab): Don't ignore symbols beginning with '@'.
Activate the misc_func_recorded mechanism for whose names begin
with '@'.
* objfiles.h (SECT_OFF_BSS): Don't detect invalid sect_index_bss
here, let the users of the macro do it.
* symtab.h (ANOFFSET): Detect here if the section index is not
initialized.
* xcoffread.c (find_targ_sec): Don't treat .bss as special,
because some objfiles may not have that section at all.
* coffread.c (cs_to_section): Ditto.
* elfread.c (elf_symtab_read): Detect an uninitialized index
value.
(elfstab_offset_sections): The macro ANOFFSET cannot be used as an
lvalue anymore.
* remote.c (get_offsets, remote_cisco_objfile_relocate): Don't use
ANOFFSET as an lvalue.
* objfiles.c (objfile_relocate, objfile_relocate): Don't use
ANOFFSET as an lvalue.
* symfile.c (default_symfile_offsets): Don't use ANOFFSET as an
lvalue.
support. Incorporate most of tm-rs6000.h.
(find_toc_address_hook): Rename to rs6000_find_toc_address_hook.
(rs6000_set_host_arch_hook): Declare.
(read_memory_addr): Define.
(pop_frame): Rename to rs6000_pop_frame.
(rs6000_pop_frame, rs6000_fix_call_dummy, rs6000_push_arguments,
rs6000_frame_saved_pc, rs6000_frame_chain): Remove non-generic
dummy frame handling.
(branch_dest, rs6000_pop_frame, rs6000_skip_trampoline_code,
rs6000_frame_saved_pc, frame_get_saved_regs,
frame_initial_stack_address, rs6000_frame_chain,
rs6000_convert_from_func_ptr_addr): Call read_memory_addr instead
of read_memory_integer.
(branch_dest, rs6000_pop_frame, rs6000_push_arguments,
rs6000_skip_trampoline_code, rs6000_frame_saved_pc,
frame_get_saved_regs, frame_initial_stack_address,
rs6000_frame_chain): Replace 4 with TDEP->wordsize.
(skip_prologue): Recognize some 64-bit stack adjustments.
(push_dummy_frame, pop_dummy_frame, set_processor,
show_processor): Delete.
(frame_get_saved_regs): Manipulate saved register addresses using
CORE_ADDR instead of int.
(rs6000_create_inferior): New function.
(register_names_*[]): Change to struct reg registers_*[].
(variants[]): Assimilate into multi-arch approach.
(register_names_*[], variants[]): Refer to pre-PowerPC
architectures as POWER instead of RS6000.
* rs6000-nat.c: Ubiquitous changes for 64-bit support.
(vmap_secs, xcoff_relocate_symtab): Cast addresses
to unsigned long to avoid sign-extension errors.
(set_host_arch): New function.
(xcoff_relocate_symtab): Try disabling usleep(36000) workaround.
(rs6000_core_fns): Use new bfd_target_xcoff_flavour.
(_initialize_core_rs6000): Initialize rs6000_set_host_arch_hook.
* symfile.c (find_sym_fns): Remove special xcoff kludge.
* xcoffread.c (secnum_to_bfd_section): Initialize args.objfile.
(process_linenos): Query line struct size from coff
backend instead of using compile-time constant.
(enter_line_range): Likewise.
(read_xcoff_symtab): Pass "XCOFF64" instead of "XCOFF" to
record_debugformat() if appropriate.
(process_xcoff_symbol): Access symbol addresses using
SYMBOL_VALUE_ADDRESS instead of SYMBOL_VALUE.
(read_symbol_lineno): Retrieve XCOFF64 symbol names from strtbl.
(scan_xcoff_symtab): Likewise. Query syment struct size from
coff backend instead of using compile-time constant.
(xcoff_sym_fns): Set flavour to bfd_target_xcoff_flavour.
* Makefile.in (INTERNAL_LDFLAGS): Add $(MH_LDFLAGS) to list of flags
that this Makefile variable get set to. (From Kevin Buettner.)
* config/powerpc/aix.mh (MH_LDFLAGS): Add linker flags so that
the TOC doesn't overflow. (From Kevin Buettner.)
* config/powerpc/tm-ppc-aix.h: Move config decisions to
multi-arched rs6000-tdep.c.
* config/rs6000/tm-rs6000.h: Likewise.
(GDB_MULTI_ARCH): Define.
(skip_trampoline_code): Rename to rs6000_skip_trampoline_code.
(is_magic_function_pointer): Replace with
rs6000_convert_from_func_ptr_addr.
(TARGET_CREATE_INFERIOR_HOOK): Define.
(find_toc_address_hook): Rename to rs6000_find_toc_address_hook.
(rs6000_set_host_arch_hook): Declare.
* config/rs6000/nm-rs6000.h (CHILD_XFER_MEMORY): Define.
Only worked if the first element in the list was
being deleted.
o When MAINLINE (reading main objectfile and need to
clear out old data), change elfread.c so that the
psymbol table is emptied once (in elf_symfile_read)
instead of multiple times in each *_read_psymtab
function.
o For elf_symfile_read, load dwarf2 symbols last
(so that they are searched for first).
o In mdebug_psymtab_read, delete check to see if
symbols for current source file already loaded.
Test doesn't work for .h files. Above change
works better
newly loaded objects upon a TARGET_WAITKIND_LOADED event.
Rewrite code which determines the TOC address for calling functions
in the inferior under AIX.
* rs6000-nat.c (find_toc_address): New function to determine
the required TOC address from a function address.
(_initialize_core_rs6000): Set up find_toc_address_hook to point
to find_toc_address.
(xcoff_relocate_symtab, xcoff_relocate_core): Remove
add_text_to_loadinfo calls.
(exec_one_dummy_insn): Change pid and status to int to get rid of
compiler warnings.
(xcoff_relocate_symtab): Cast ldi to `int *' when passing it to
ptrace to get rid of compiler warnings.
* rs6000-tdep.c: Add definition for find_toc_address_hook.
(rs6000_fix_call_dummy): If find_toc_address_hook is non zero,
patch TOC address load code in the call dummy with the value
returned from find_toc_address_hook.
(struct loadinfo, loadinfo, loadinfolen,
loadinfotextindex, xcoff_init_loadinfo, free_loadinfo,
xcoff_add_toc_to_loadinfo, add_text_to_loadinfo, find_toc_address):
Remove.
(_initialize_rs6000_tdep): Remove initialization of
coff_add_toc_to_loadinfo_hook and xcoff_init_loadinfo_hook.
* xcoffread.c (coff_add_toc_to_loadinfo_hook,
xcoff_init_loadinfo_hook): Remove.
(struct coff_symfile_info): Add toc_offset field.
(scan_xcoff_symtab): Record toc_offset value in toc_offset field
instead of calling xcoff_add_toc_to_loadinfo_hook.
(get_toc_offset): New function to return the value of the
toc_offset field for an object file.
(xcoff_initial_scan): Remove call of xcoff_init_loadinfo_hook.
* xcoffsolib.h (add_text_to_loadinfo): Remove declaration.
* config/rs6000/tm-rs6000.h: Add declarations for
find_toc_address_hook and get_toc_offset.
(record_debugformat): Declare global function.
* buildsym.c (start_subfile): Initialize debugformat member
to NULL.
(record_debugformat): New function to record the format.
(end_symtab): Copy format into symtab debugformat member.
(end_symtab): Free subfile debugformat member.
* symmisc.c (free_symtab): Free debugformat when freeing
symtab.
* symfile.c (allocate_symtab): Initialize the new debugformat
member for new symtabs.
* symtab.h (struct symtab): Add debugformat member.
* source.c (source_info): Print the debug format.
* os9kread.c (os9k_process_one_symbol): Call record_debugformat
with "OS9".
* hpread.c (hpread_expand_symtab): Call record_debugformat
with "HP".
(hpread_process_one_debug_symbol): Ditto.
* dbxread.c (process_one_symbol): Call record_debugformat
with "stabs".
* coffread.c (coff_start_symtab): Call record_debugformat
with "COFF".
* xcoffread.c (read_xcoff_symtab): Call record_debugformat
with "XCOFF".
* dwarfread.c (read_file_scope): Call record_debugformat
with "DWARF 1".
* dwarf2read.c (read_file_scope): Call record_debugformat
with "DWARF 2".
* dstread.c (dst_end_symtab): Set debugformat to be
"Apollo DST".
* mdebugread.c (new_symtab): Set debugformat to be "ECOFF".
(DONT_RELOCATE_SYMFILE_OBJFILE): Removed.
* xcoffsolib.h (struct vmap): Add new members tvma, toffs and dvma,
remove tadj.
* exec.c (bfdsec_to_vmap): Initialize new vmap members, initialize
tstart and dstart with section VMA.
* rs6000-nat.c (vmap_symtab): Relocate relative to the VMA in the
object file.
(vmap_ldinfo, xcoff_relocate_core): Adjust tstart by section offset
of the text section, remove DONT_RELOCATE_SYMFILE_OBJFILE hack.
(vmap_exec): Relocate relative to the VMA in the object file,
relocate .bss section as well.
(xcoff_relocate_core): No longer adjust section addresses by VMA.
* rs6000-tdep.c (find_toc_address): Change type of tocbase
to CORE_ADDR.
* xcoffread.c (secnum_to_bfd_section): New routine to get
BFD section from CS section number.
(scan_xcoff_symtab): Make toc_offset section relative.
* symtab.c (total_number_of_methods): Avoid core dump if
baseclass type is still undefined.
* dbxread.c (dbx_symfile_read): Call free_pending_blocks rather
than poking global variable (which is now static).
* hpread.c (hpread_build_psymtabs): Ditto.
* os9kread.c (os9k_symfile_read): Ditto.
* xcoffread.c (xcoff_initial_scan): Ditto.
* buildsym.h (free_pending_blocks): Declare here.
(pending_blocks): Remove declaration of global symbol.
(free_pendings): Remove declaration of global symbol.
(make_blockvector): Declare here.
(record_pending_block): Declare here.
* dstread.c (make_blockvector): Remove static copy that was old
clone of version in buildsym.c.
(process_dst_block): Call record_pending_block rather than doing
it by hand.
(read_dst_symtab): Ditto.
* buildsym.c (make_blockvector): Make global rather than static,
(record_pending_block): New function, code moved from finish_block.
(finish_block): Use record_pending_block.
(free_pending_blocks): New function.
(really_free_pendings): Call free_pending_blocks.
(pending_blocks): Make static instead of global.
(free_pendings): Make static instead of global.
be correct type for passing to qsort.
(add_stab_to_list): Ifdef out unused function and prototype.
(compare_lte): Add prototype
(arrange_linetable): Ditto.
(record_include_begin): Ditto.
(record_include_end): Ditto.
(process_linenos): Ditto.
(xcoff_next_symbol_text): Ditto.
(scan_xcoff_symtab): Ditto.
(xcoff_initial_scan): Ditto.
* dbxread.c (read_dbx_symtab end_psymtab), partial-stab.h: Don't
use partial_symtab->textlow==0 as a flag, as 0 is a legitimate
text address. Use a seperate flag (textlow_not_set) instead.
This makes stabs in ELF .o files work a lot better.
* mdebugread.c xcoffread.c: Define textlow_not_set for
partial-stab.h.
* stabsread.h (end_psymtab): Add textlow_not_set arg to prototype.
* coffread.c (record_minimal_symbol): Don't presave name string
on symbol_obstack before passing to prim_record_minimal_symbol.
It now handles saving the string itself.
* dbxread.c (read_dbx_dynamic_symtab): Ditto.
* mipsread.c (read_alphacoff_dynamic_symtab): Ditto.
* os9kread.c (record_minimal_symbol): Ditto.
* solib.c (solib_add_common_symbols): Ditto.
* coffread.c (coff_symtab_read): Don't presave name string on
symbol_obstack before passing to prim_record_minimal_symbol_and_info.
It now handles saving the string itself.
* dbxread.c (record_minimal_symbol): Ditto.
* elfread.c (record_minimal_symbol_and_info): Ditto.
* dstread.c (record_minimal_symbol): Remove static function that just
called prim_record_minimal_symbol with the same args (after change to
prim_record_minimal_symbol to do it's own name string saves).
* nlmread.c (record_minimal_symbol): Ditto.
* somread.c (record_minimal_symbol): Ditto.
* hpread.c (hpread_read_enum_type): Save symbol name on symbol obstack.
(hpread_read_function_type): Ditto.
(hpread_process_one_debug_symbol): Ditto.
* mdebugread.c (parse_symbol): Ditto.
(new_symbol): Ditto.
* minsyms.c (prim_record_minimal_symbol_and_info): Ditto.
* coffread.c (process_coff_symbol): Use obsavestring to save
SYMBOL_NAME, rather than obstack_copy0.
* dstread.c (create_new_symbol): Ditto
* symfile.c (obconcat): Ditto.
* stabsread.c (patch_block_stabs): Ditto.
* xcoffread.c (SYMNAME_ALLOC): Ditto.
* symfile.c (obsavestring): Update comments
* solib.c (solib_add_common_symbols): Remove local var origname.
that is referenced nowhere else.
(set_breakpoint): Ditto.
(do_enable_breakpoint): Created from enable_once_breakpoint
with a couple of changes.
(enable_breakpoint): Call do_enable_breakpoint with an appropriate
bpdisp enum value to set disposition of breakpoint.
(enable_once_breakpoint): Ditto.
(enable_delete_breakpoint): Ditto.
* breakpoint.h (clear_momentary_breakpoints): Remove prototype.
* symtab.c (find_pc_line): Improve comments.
* gdbtk.c: Fix a couple of misspellings.
* xcoffread.c: Ditto.
* config/rs6000/rs6000.mh (NATDEPFILES): Move xcoffread.o ...
* config/rs6000/rs6000.mt (TDEPFILES): ... to here
* xcoffsolib.c (xcoff_relocate_symtab_hook): Define and initialize.
(solib_info): Call xcoff_relocate_symtab via the hook.
(sharedlibrary_command): Ditto.
* xcoffread.c: Remove all FAKING_RS6000 comments and defines.
(xcoff_add_toc_to_loadinfo_hook): Define and initialize here.
(xcoff_init_loadinfo_hook): Define and initialize here.
(scan_xcoff_symtab): Call xcoff_add_toc_to_loadinfo via the hook.
(xcoff_initial_scan): Call xcoff_init_loadinfo via the hook.
* xcoffsolib.h (xcoff_relocate_symtab_hook): Declare extern func.
* rs6000-tdep.c (_initialize_rs6000_tdep): Add initializations
of xcoff_add_toc_to_loadinfo_hook and xcoff_init_loadinfo_hook.
* rs6000-nat.c (_initialize_core_rs6000): Add initialization
of xcoff_relocate_symtab_hook.
* Makefile.in (SFILES): Add bcache.c.
(symtab_h): Add bcache.h.
(HFILES_NO_SRCDIR): add bcache.h
(COMMON_OBJS): Add bcache.o
(bcache.o): New target.
* dbxread.c (start_psymtab): Make global_syms & static_syms
type "partial_symbol **".
* hpread.c (hpread_start_symtab): Ditto.
* os9kread.c (os9k_start_psymtab): Ditto.
* stabsread.h (start_psymtab): Ditto.
* {symfile.c, symfile.h} (start_psymtab_common): Ditto.
* maint.c (maintenance_print_statistics): Call
print_symbol_bcache_statistics.
* objfiles.c (allocate_objfile): Initialize psymbol bcache malloc
and free pointers.
* solib.c (allocate_rt_common_objfile): Ditto.
* symfile.c (reread_symbols): Ditto.
(free_objfile): Free psymbol bcache when objfile is freed.
(objfile_relocate): Use new indirect psymbol pointers.
* objfiles.h (struct objfile): Add psymbol cache.
* symfile.c (compare_psymbols): Now passed pointers to pointers to
psymbols.
(reread_symbols): Free psymbol bcache when freeing other objfile
resources.
(add_psymbol_to_list, add_psymbol_addr_to_list): Initialize new
psymbol using the psymbol bcache.
(init_psymbol_list): Psymbol lists now contain pointers rather than
the actual psymbols.
* symfile.h (psymbol_allocation_list): Psymbol lists now dynamically
grown arrays of pointers.
(ADD_PSYMBOL_VT_TO_LIST): Initialize new symbol using the psymbol
bcache.
* symmisc.c (print_partial_symbols): Now takes pointer to pointer
to partial symbol.
(print_symbol_bcache_statistics): New function to print per objfile
bcache statistics.
(print_partial_symbol, print_partial_symbols,
maintenance_check_symtabs, extend_psymbol_list):
Account for change to pointer to pointer to partial symbol.
* symtab.c (find_pc_psymbol, lookup_partial_symbol, decode_line_2,
make_symbol_completion_list):
Account for change to pointer to pointer to partial symbol.
* symtab.h (bcache.h): Include.
* xcoffread.c (xcoff_start_psymtab): Make global_syms & static_syms
type "partial_symbol **".
arguments. Sorting is now dependent on OBJF_REORDERED. All
callers/references changed.
* dbxread.c (read_ofile_symtab): Correctly determine value for
last_source_start_addr for reordered executables.
(process_one_symbol): Handle N_FUN with no name as an end of
function marker.
* partial-stab.h (case N_FN, N_TEXT): Don't assume CUR_SYMBOL_VALUE
is the high text address for a psymtab.
(case N_SO): Likewise.
(case N_FUN): Handle N_FUN with no name as an end of function
marker.
* minsyms.c (lookup_minimal_symbol_by_pc): Examine all symbols
at the same address rather than a random subset of them.
* coffread.c (coff_symfile_init): Set OBJF_REORDERED.
* elfread.c (elf_symfile_init): Similarly.
* somread.c (som_symfile_init): Similarly.
* xcoffread.c (xcoff_symfile_init): Similarly.
Support for debugging reordered executables. Remaining mentor vm
changes.
and dependencies_used after finishing the partial symbol table.
* rs6000-nat.c (xcoff_relocate_core): Don't relocate data
addresses for the main objfile if DONT_RELOCATE_SYMFILE_OBJFILE
is defined.
* xcoffread.c: gcc -Wall lint. Remove traceback table reading
code. The existing code tried to add parameter information for
functions compiled without -g, which cannot be done properly
for optimized code and produced misleading parameter displays.
(ef_complaint, eb_complaint): Make a local static copy to avoid
dependency on coffread.c.
(read_xcoff_symtab, process_xcoff_symbol, scan_xcoff_symtab):
Enter C_EXT/C_HIDEXT symbols into the minimal symbol table only.
(read_xcoff_symtab): Ignore C_STAT section auxiliary entry
symbols. Complain about unmatched .ef and .eb symbols instead of
segfaulting.
(process_xcoff_symbol): Determine value of C_GSYM symbols via
the global_sym_chain mechanism in stabsread.c.
(xcoff_new_init): Call stabsread_new_init and buildsym_new_init.
(init_string_tab): Initialize length field bytes in the strtbl.
(scan_xcoff_symtab): Skip symbols that start with `$' or `.$'.
Set first_fun_line_offset for symbols with two auxents only.
* symfile.c, symfile.h (init_psymbol_list): New function;
consolidate duplicated copies from os9kread.c, dbxread.c
and dwarfread.c.
* defs.h: Declare info_verbose.
* xcoffread.c: Extensive changes to support psymtabs.
func_symbol_type and var_symbol_type as type of functions and
variables which don't have any stabs associated with them.
Reindent most of function.
(_initialize_xcoffread): Initialize *_symbol_type.
* xcoffread.c (read_xcoff_symtab): Reindent most of function.
Put C_HIDEXT symbols in the minimal symbols, rather than ignoring
them (this part commented out as I didn't quite get it to work).
(cs_to_section, find_targ_sec): New functions, to support above code.
* xcoffread.c (RECORD_MINIMAL_SYMBOL): Only skip '.' if it is
actually present.
of using longest_to_int.
* infcmd.c (run_stack_dummy): Reinstate set_current_frame call,
mips and alpha targets need the real breakpoint pc for
creating the breakpoint frame.
* stack.c (return_command): Cast return value to the return
type of the function from which we return.
* values.c (set_return_value): Pass VALUE_CONTENTS unmodified
to STORE_RETURN_VALUE.
* symtab.c (lookup_symbol): Remove search for `static mangled
symbols', the search for `static symbols' already looks for
mangled and demangled symbols via lookup_block_symbol.
* valarith.c (value_binop): Use ANSI C arithmetic conversions
when performing integral evaluations, implement BINOP_EQUAL and
BINOP_LESS.
(value_equal, value_less): Use value_binop to perform the
comparison if both operands have TYPE_CODE_INT.
* rs6000-tdep.c (pop_frame): Make sure all registers are valid,
as they are written back later. Handle sp restore for frameless
functions. Use fdata.nosavedpc instead of fdata.frameless to
determine if the pc has been saved.
(function_frame_info): Handle `mr r31,r1', which is generated by
gcc-2.6, as a synonym for `oril r31,r1,0'.
(skip_trampoline_code): Handle shared library trampolines.
* xcoffread.c (read_xcoff_symtabs): Record XMC_GL symbols with
their real name. Enables setting of breakpoints in shared libraries
before the executable is run.
mst_solib_trampoline.
* f-valprint.c (f_val_print): Change cast of valaddr from
CORE_ADDR * to char **, since that is how it is used.
* dbxread.c (read_dbx_dynamic_symtab): Save copy of symbol names
using obsavestring, and pass that to prim_record_minimal_symbol.
Having the objfile point to bfd_asymbol_name directly doesn't work
if we save and restore a mapped symbol file.
the end of the list of objfiles, instead of at the beginning.
* xcoffread.c (allocate_include_entry): New function, abstracted
from code in record_include_begin.
(record_include_begin, record_include_end): Call it.
* blockframe.c (reinit_frame_cache): Test inferior_pid instead of
target_has_stack to decide whether to create a real stack frame
for the cache.
* coffread.c (process_coff_symbol) [CXUX_TARGET]: Ignore vendor
section.
* config/m88k/tm-cxux.h (CXUX_TARGET): Define.
* h8300-tdep.c: Include "dis-asm.h" instead of <dis-asm.h>.
* xcoffread.c (read_xcoff_symtab): For C_FILE symbols, only use
the auxent if the symbol's name is ".file". From David Edelsohn
<c1dje@watson.ibm.com>.
* xcoffread.c (read_xcoff_symtab): Ignore symbols of class C_EXT,
smtyp XTY_LD, sclass XMC_DS (external data segment label). They
often have the same names as debug symbols for functions, and
confuse lookup_symbol().
library functions before the executable is run. Retrieve dynamic
symbols from stripped executables.
* symtab.h (minimal_symbol_type): Add mst_solib_trampoline type.
* parse.c (write_exp_msymbol), symmisc.c (dump_msymbols),
symtab.c (list_symbols): Handle mst_solib_trampoline.
* minsyms.c (lookup_minimal_symbol): Handle mst_solib_trampoline
for all targets, remove IBM6000_TARGET dependencies.
* dbxread.c (read_dbx_dynamic_symtab): New function.
* dbxread.c (dbx_symfile_read): Use it.
* dbxread.c (SET_NAMESTRING): Set namestring to
"<bad string table index>" instead of "foo" if the string index is
corrupt.
* xcoffread.c (read_xcoff_symtab): Use mst_solib_trampoline instead
of mst_unknown.
* symtab.c (list_symbols): Take from_tty as parameter and pass it
to break_command. Handle mst_file_* minimal symbol types.
Change all references to stdout/stderr to gdb_stdout/gdb_stderr.
Replace all calls to stdio output functions with calls to
corresponding _unfiltered functions (`fprintf_unfiltered')
Replaced calls to fopen for output to gdb_fopen.
Added sufficient goo to utils.c and defs.h to make the above work.
The net effect is that stdio output functions are only directly used
in utils.c. Elsewhere, the _unfiltered and _filtered functions and
GDB_FILE type are used.
In the near future, GDB_FILE will stop being equivalant to FILE.
The semantics of some commands has changed in a very subtle way:
called in the right context, they may cause new occurences of
prompt_for_continue() behavior. The testsuite doesn't notice anything
like this, though.
Please respect this change by not reintroducing stdio output
dependencies in the main body of gdb code. All output from commands
should go to a GDB_FILE.
Target-specific code can still use stdio directly to communicate with
targets.
Move common block handling from dbxread.c to stabsread.c.
Use the name from the BCOMM instead of the ECOMM.
Allocate things on the symbol_obstack.
* xcoffread.c (process_xcoff_symbol): Process C_BCOMM, C_ECOMM,
and C_ECOML. On unrecognized storage classes, go ahead and call
define_symbol (after the complaint).
* dbxread.c (process_one_symbol): Don't relocate 'S' symbols by
the text offset.
Revise comments re linetable sorting.
* buildsym.c (compare_line_numbers): Sort by pc, not by line.
* coffread.c: Tell end_symtab to sort the line table.
* coffread.c: Re-work a lot of the coff-specific stuff to use stuff
in buildsym.c. This includes coff_finish_block, coff_context_stack,
coff_local_symbols, coff_file_symbols, coff_global_symbols,
coff_end_symtab and coff_add_symbol_to_list.
(read_enum_type): Deal with it now that we have a "struct pending"
not a "struct coff_pending".
* buildsym.c (end_symtab): Don't realloc subfile->linetable.
we have breakpoints or watchpoints as we might have to ignore internal
breakpoints.
Fix gdb core dumps after `file newfile' commands.
* symtab.h, symfile.c (clear_symtab_users): New routine which
unconditionally clears symtab users. clear_symtab_users_once
commented out as it was a noop anyway.
* objfiles.c (free_objfile): Don't call clear_symtab_users_once.
* objfiles.c (free_all_objfiles), symfile.c (new_symfile_objfile),
xcoffexec.c (exec_close): Call clear_symtab_users if necessary.
* symfile.c (syms_from_objfile): Install cleanups for errors during
symbol reading.
* coffread.c, dbxread.c, mipsread.c, xcoffread.c (*_symfile_read):
Lint cleanup code, call do_cleanups explicitly.
* symfile.c (symbol_file_add): Call new_symfile_objfile and
reinit_frame_cache _after_ the new symbols are read in.
read_type_number static.
(define_symbol): Don't try to deal with a missing symbol
descriptor which isn't followed by digit, '(', or '-'.
* stabsread.h: Don't declare read_type_number here.
* gdbtypes.h: Don't declare error_type here.
* xcoffread.c: Remove NO_TYPEDEFS code.
we have a current_source_symtab, and s is NULL, return without
doing anything.
xcoffread.c (xcoff_symfile_read): Don't call select_source_symtab.
breakpoint.c (breakpoint_re_set): Don't call select_source_symtab.
not just 50 symbols.
(symtbl_num_syms): New variable.
(read_xcoff_symtab): Set it.
(read_symbol_nvalue): Check for bad symno.
(read_symbol_{lineno,nvalue}, callers): Don't pass symtable; it's
always symtbl.
* xcoffread.c (retrieve_tracebackinfo): Move assignment out
of while condition.
* xcoffread.c (enter_line_range): complain() on bad endoffset.
xcoffread.c: Doc fixes.
Tue Mar 9 09:56:12 1993 Jim Kingdon (kingdon@cygnus.com)
* tm-rs6000.h (CORE_NEEDS_RELOCATION): Just call xcoff_relocate_core.
xcoffexec.c (xcoff_relocate_core): New function.
(text_adjustment): Removed.
(add_vmap): Return the vmap.
rs6000-tdep.c (add_text_to_loadinfo): No longer static.
Fri Mar 5 05:22:46 1993 Jim Kingdon (kingdon@cygnus.com)
* xcoffsolib.h: Add objfile member to struct vmap.
xcoff{exec,solib}.c: Use it, not lookup_objfile_bfd.
xcoffexec.c (add_vmap): Allocate objfiles here.
of initial connection attempt with INTERRUPT. Treat a timeout
while waiting for remote packet like a retry, unless the remote
side is actively running user code. Fix a few long printf_filtered's.
* xcoffread.c (read_xcoff_symtab): Don't use null symbol name for
trampoline symbols.
* buildsym.c (start_subfile): Allow null file name.
this struct symbol. Set it up in initialize_xcoffread.
[This broke when Fred changed "struct symbol".]
(read_xcoff_symtab, xcoff_symfile_read): Surround code that only
works on real rs/6000 target with #ifndef FAKING_RS6000.
xcoffread.c:builtin_type.
* xcoffread.c (builtin_type): Move to stabsread. Remove
IBM6000_HOST dependency. Move misplaced comments.
(various): Change printf's to complaints.
(patch_block_stabs, process_xcoff_symbol case C_DECL): Add
objfile argument to read_type calls under #if 0.
(process_xcoff_symbol case C_RSYM): Fix typo in #ifdef.
* xcoffexec.c (map_vmap): Don't allocate an objfile for the exec_file.
* Makefile.in: xcoffread.o is not built by default.
* config/rs6000.mh (NATDEPFILES): xcoffread.o is native only.
* doc/gdbint.texinfo: Eliminate IBM6000_HOST, document
IBM6000_TARGET.
* defs.h (demangle_and_match): Remove prototype.
* dwarfread.c (STREQ, STREQN): Remove macros, replaced with STREQ
and STREQN defined in defs.h.
* dwarfread.c (set_cu_language): For completely unknown languages,
try to deduce the language from the filename. Retain behavior
that for known languages we don't know how to handle, we use
language_unknown.
* dwarfread.c (enum_type, symthesize_typedef): Initialize language
and demangled name fields in symbol.
* dwarfread.c, mipsread.c, partial-stab.h: For all usages of
ADD_PSYMBOL_TO_LIST, add language and objfile parameters.
* dwarfread.c (new_symbol): Attempt to demangle C++ symbol names
and cache the results in SYMBOL_DEMANGLED_NAME for the symbol.
* elfread.c (STREQ): Remove macro, use STREQ defined in defs.h.
Replace usages throughout.
* elfread.c (demangle.h): Include.
* elfread.c (record_minimal_symbol): Remove prototype and function.
* gdbtypes.h, symtab.h (B_SET, B_CLR, B_TST, B_TYPE, B_BYTES,
B_CLRALL): Moved from symtab.h to gdbtypes.h.
* infcmd.c (jump_command): Remove code to demangle name and add
it to a cleanup list. Now just use SYMBOL_DEMANGLED_NAME.
* minsyms.c (demangle.h): Include.
* minsyms.c (lookup_minimal_symbol): Indent comment to match code.
* minsyms.c (install_minimal_symbols): Attempt to demangle symbol
names as C++ names, and cache them in SYMBOL_DEMANGLED_NAME.
* mipsread.c (psymtab_language): Add static variable.
* stabsread.c (demangle.h): Include.
* stabsread.c (define_symbol): Attempt to demangle C++ symbol
names and cache them in the SYMBOL_DEMANGLED_NAME field.
* stack.c (return_command): Remove explicit demangling of name
and use of cleanups. Just use SYMBOL_DEMANGLED_NAME.
* symfile.c (demangle.h): Include.
* symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list): Fix
to match macros in symfile.h and allow them to be compiled
if INLINE_ADD_PSYMBOL is not true.
* symfile.h (INLINE_ADD_PSYMBOL): Default to true if not set.
* symfile.h (ADD_PSYMBOL_*): Add language and objfile parameters.
Add code to demangle and cache C++ symbol names. Use macro form
if INLINE_ADD_PSYMBOL is true, otherwise use C function form.
* symmisc.c (add_psymbol_to_list, add_psymbol_addr_to_list):
Remove, also defined in symfile.c, which we already fixed.
* symtab.c (expensive_mangler): Remove prototype and function.
* symtab.c (find_methods): Remove physnames parameter and fix
prototype to match.
* symtab.c (completion_list_add_symbol): Name changed to
completion_list_add_name.
* symtab.c (COMPLETION_LIST_ADD_SYMBOL): New macro, adds both
the normal symbol name and the cached C++ demangled name.
* symtab.c (lookup_demangled_partial_symbol,
lookup_demangled_block_symbol): Remove prototypes and functions.
* symtab.c (lookup_symbol): Remove use of expensive_mangler,
use lookup_block_symbol instead of lookup_demangled_block_symbol.
Remove code to try demangling names and matching them.
* symtab.c (lookup_partial_symbol, lookup_block_symbol):
Fix to try matching the cached demangled name if no match is
found using the regular symbol name.
* symtab.c (find_methods): Remove unused physnames array.
* symtab.c (name_match, NAME_MATCH): Remove function and macro,
replaced with SYMBOL_MATCHES_REGEXP from symtab.h.
* symtab.c (completion_list_add_symbol): Rewrite to use cached
C++ demangled symbol names.
* symtab.h: Much reformatting of structures and such to add
whitespace to make them more readable, and make them more
consistent with other gdb structure definitions.
* symtab.h (general_symbol_info): New struct containing fields
common to all symbols.
* symtab.h (SYMBOL_LANGUAGE, SYMBOL_DEMANGLED_NAME,
SYMBOL_SOURCE_NAME, SYMBOL_LINKAGE_NAME, SYMBOL_MATCHES_NAME,
SYMBOL_MATCHES_REGEXP, MSYMBOL_INFO, MSYMBOL_TYPE): New macros.
* symtab. (struct minimal_symbol, struct partial_symbol, struct
symbol): Use general_symbol_info struct.
* utils.c (demangle_and_match): Remove, no longer used.
* valops.c (demangle.h): Include.
* xcoffexec.c (eq): Remove macro, replace usages with STREQ.
* blockframe.c, breakpoint.c, c-exp.y, c-valprint.c, dbxread.c,
infcmd.c, m2-exp.y, minsyms.c, objfiles.h, solib.c, stack.c,
symmisc.c, symtab.c, valops.c: Replace references to minimal
symbol fields with appropriate macros.
* breakpoint.c, buildsym.c, c-exp.y, c-typeprint.c, c-valprint.c,
coffread.c, command.c, convex-tdep.c, cp-valprint.c, dbxread.c,
demangle.c, elfread.c, energize.c, environ.c, exec.c,
gdbtypes.c, i960-tdep.c, infrun.c, infrun-hacked.c, language.c,
main.c, minsyms.c, mipsread.c, partial-stab.h, remote-es1800.c,
remote-nindy.c, remote-udi.c, rs6000-tdep.c, solib.c, source.c,
sparc-pinsn.c, stabsread.c, standalone.c, state.c, stuff.c,
symfile.c, symmisc.c, symtab.c, symtab.h, tm-sysv4.h,
tm-ultra3.h, values.c, xcoffexec.c, xcoffread.c: Replace strcmp
and strncmp usages with STREQ, STREQN, or STRCMP as appropriate.
* breakpoint.c, buildsym.c, c-typeprint.c, expprint.c, findvar.c,
mipsread.c, printcmd.c, source.c, stabsread.c, stack.c,
symmisc.c, tm-29k.h, valops.c, values.c: Replace SYMBOL_NAME
references with SYMBOL_SOURCE_NAME or SYMBOL_LINKAGE_NAME as
appropriate.
* buildsym.c (start_subfile, patch_subfile_names): Default the
source language to what can be deduced from the filename.
* buildsym.c (end_symtab): Update the source language in the
allocated symtab to match what we have been using.
* buildsym.h (struct subfile): Add a language field.
* c-typeprint.c (c_print_type): Remove code to do explicit
demangling.
* dbxread.c (psymtab_language): Add static variable.
* dbxread.c (start_psymtab): Initialize psymtab_language using
deduce_language_from_filename.
* dbxread.c (read_dbx_symtab): Use L_SET as bfd_seek arg.
(elfstab_build_psymtabs): staboffset and stabstroffset args are
file_ptr's.
* dwarfread.c (struct dwfinfo): Convert dbfoff, lnfoff to file_ptr.
(scan_compilation_units): Punt unused filename arg. dbfoff,
lnoffset, and curlnoffset are file_ptr's now.
(dwarf_build_psymtabs): Drop desc and filename args; use
objfile. dbfoff and lnoffset are file_ptr's now.
(read_ofile_symtab): foffset is now file_ptr. Use L_SET in bfd_seek.
* elfread.c (struct elfinfo): dboffset and lnoffset are file_ptr's.
(elf_symfile_read): Skip desc and filename args to
dwarf_build_psymtabs. Pass file_ptr's to elfstab_build_psymtabs.
* gdb-stabs.h: Use file_ptr rather than off_t.
* mipsread.c (fixup_symtab): f_ptr is a file_ptr. Re-enable
compile-time debug check that someone turned off as "unused".
(read_the_mips_symtab): st_filptr is a file_ptr. Fix bfd_seek call.
* symfile.h: Update dwarf_build_psymtabs and
elfstab_build_psymtabs prototypes.
* xcoffread.c (init_stringtab, init_lineno, xcoff_symfile_read):
Use file_ptr offsets. bfd_seeks use L_SET.
* dwarfread.c (struct_type): In absence of AT_byte_size for
bitfield, use size of object of member's type for the size of
the anonymous object containing the bit field.
* dwarfread.c (completedieinfo): Set has_at_byte_size when
an AT_byte_size attribute is seen.
* mipsread.c (psymtab_to_symtab_1): Fix misspelled cast to
union aux_ext (was aux_ent).
* i386-pinsn.c (print_insn): Cast 2'nd arg to read_memory from
unsigned char* to char*, for Lucid compiler.
* i386-tdep.c (codestream_fill): Fix cast of 2'nd arg to read_memory
to be correct type (from unsigned char* to char*).
* valprint.c (type_print_derivation_info): Minor tweak to placement
of commas in derived class printing.
* xcoffread.c (builtin_type): Fix misspelling in fatal message.
tokens with embedded whitespace, such as C++ demangled names.
* defs.h (demangle_and_match, strcmp_iw, skip_quoted): Prototypes.
* main.c (gdb_completer_quote_characters): Add global variable.
* main.c (symbol_completion_function): Total rewrite for C++
demangled name handling.
* main.c (skip_quoted): New function.
* main.c (main): Set rl_completer_quote_characters.
* symmisc.c (dump_symtab): Print source language for symtab.
* symtab.c (expensive_mangler): Add prototype and function.
* symtab.c (completion_list_add_symbol): Total rewrite for new
C++ demangled name handling.
* symtab.c (lookup_symbol): Check for demangled C++ symbol first,
other changes for demangled C++ symbol handling.
* symtab.c (lookup_demangled_block_symbol): Use demangle_and_match.
* symtab.c (lookup_demangled_partial_symbol): Use demangle_and_match.
* symtab.c (decode_line_1): Recognize C++ demangled names on input.
* symtab.c (completion_list_add_symbol): Total rewrite for new
C++ demangled name handling.
* symtab.c (expensive_mangler): New function.
* utils.c (strcmp_iw, demangle_and_match): New functions.
* xcoffread.c (aixcoff_symfile_read): Fix prototype.
without masking, since it is signed and will later be compared
against signed quantities. The right fix is probably to make
it all unsigned, but this is a small, safe fix for this release.
FIXME -- make the real change sometime soon.
(Imported from progressive.)
functions which handle overwriting of forward-referenced types
for stabs file reading.
(lookup_{reference,pointer,function}_type): These just call
the make_*_type functions with a null storage alloc parameter.
* gdbtypes.h (make_{reference,pointer,function}_type): Declare.
* xcoffread.c (smash_to_pointer_type): Remove, no longer used.
* buildsym.c (dbx_lookup_type): Zero result for (-1,-1) arg.
(dbx_alloc_type): Make it easier to understand. No funct change.
(define_symbol: 't'): Don't put the typedef name into the name of
the struct, union, or enum. Bugfix.
(read_type: '*', '&', 'f'): Add comments. Use make_XXX_type
routines to properly handle overwriting preallocated types so that
forward references will work.
(read_enum_type): Force enum values to file scope, due to bug in
Sun compiler output. FIXME, fix later.
Remove unused header_file_prev_index mechanism. It was already
obsolete in gdb-3.5. These comments appeared in 3.5:
/* This code was used before I knew about the instance codes.
My first hypothesis is that it is not necessary now
that instance codes are handled. */
* dbxread.c (add_new_header_file): Remove header_file_prev_index.
* buildsym.h: Remove it and prev_index that saves it.
* buildsym.c (push_subfile, pop_subfile, start_symtab): Remove it.
* solib.c (special_symbol_handling): When called from core files,
must set up debug_addr. Don't print error messages, just return.
* symmisc.c (print_symbol): Less ascii diarrhea for enums, please.
basis. See comments in objfiles.h and details in ChangeLog. Also remove
redundant definitions of FRAME_CHAIN_VALID from most of the tm-* files and
use a default definition in frame.h.
elfread.c (coff_symfile_finish): Add function, prototype, and
add to the xxxx_sym_fns struct for each file type. Also reformat
the xxxx_sym_fns vector to a standard format and add comments.
* coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c,
elfread.c (xxx_symfile_new_init, xxx_symfile_init, xxx_symfile_read):
Pass pointer to struct objfile rather than pointer to sym_fns.
Change references inside each function accordingly. Allocate any
symbol file specific info in the per-objfile memory region.
* dbxread.c (free_and_init_header_files): Break function into
free_header_files(), called from dbx_symfile_finish(), and
init_header_files(), called from dbx_new_init().
* dbxread.c (dbx_new_init): Move deallocation things to new
dbx_symfile_finish function.
* elfread.c (elf_new_init): Call buildsym_new_init().
* objfiles.c (free_objfile): Call the appropriate symfile_finish()
routine for the objfile before deallocating other stuff.
* sparc-tdep.c (get_longjmp_target): Cast target_read_memory arg.
* symfile.h: Move struct sym_fns to before struct objfile def.
Add sym_finish function pointer and change prototypes of other
function pointers to reflect passing struct objfile pointer rather
than struct sym_fns pointer.
* symfile.c: Remove now obsolete symtab_fns pointer.
* symfile.c (symfile_init): Renamed to find_sym_fns, and now only
locates the correct sym_fns struct for the given objfile.
* symfile.c (syms_from_objfile, symbol_file_add): Restructured
for better support of mapped symbol tables.
* symfile.c (symbol_file_command): Remove obsolete code using
symfile_fns.
* symfile.h: Remove duplicate declarations for symfile_objfile,
entry_point, and object_files.
* target.c (target_info): Compare symfile_objfile to NULL.
* xcoffread.c (aixcoff_new_init): Move deallocation stuff to
aixcoff_symfile_finish().
* All GDB files that #include defs.h: Removed stdio.h.
(defs.h): #include stdio.h.
This has been tested by building GDBs for all targets hosted on Sun4.
None of the build problems were related to stdio.h inclusion. (n.b.
many configurations don't build for other reasons.)
* minsyms.c (install_minimal_symbols): Add bunches to any
existing minsyms in the objfile. Avoid extra mallocation
by working directly in the obstack. Remove ignored `mainline' parm.
* coffread.c, dbxread.c, elfread.c, mipsread.c, solib.c, symtab.h,
xcoffread.c: Change all callers.
* FIXME: We should be able to eliminate MAINLINE from all the
symbol readers now, with a small bit of work.
* valops.c, value.h: Lint.
* remote-vx.c: Add missing break; statement. Bugfix by
Michael Sclafani, <sclafani@src.dec.com>.
this file does not exist, and not including it hasn't seemed to
cause problems.
main.c: Use the proper enum's in the options structure initialization;
the Apollo compiler chokes on this.
to xm-sysv4.h. Split OPCODE_DIR into OPCODE_DIR1 and OPCODE_DIR2
to reflect actual locations of opcode files, so TAGS target will
be buildable.
i386-tdep.c: Change an erroneous 'm68k' reference to 'i386'.
i386-tdep.c (supply_fpregset, fill_fpregset): Remove m68k code.
m68k-tdep.c (supply_fpregset, fill_fpregset): Fix array
dereferencing to access the correct elements.
valops.c (value_addr): Declare return type of external func value_copy().
xcoffread.c: Undefine next_symbol_text before redefining it.