* libcoff-in.h (xcoff_tdata): Change debug_indices to a signed long.
* libcoff.h: Regenerate.
* xcofflink.c (xcoff_keep_symbol_p): New function, using the
"skip" logic from xcoff_link_input_bfd.
(bfd_xcoff_size_dynamic_sections): Explicitly skip dynamic
objects in a dynamic link, rather than checking whether csectpp
is null. Always allocate debug_index for other objects,
and always go through the loop. Update the type of debug_index
after the change above. Read the auxillary csect information
and use xcoff_keep_symbol_p to decide whether a symbol should
be kept. Set its debug_index to -2 if not.
(xcoff_link_input_bfd): Update the type of debug_index after
the change above and always expect it to be nonnull. Use it to
test whether a symbol should be stripped, rather than making the
decision here. Postpone all symbol creation to the second pass.
* xcofflink.c: (xcoff_mark_symbol): Mark the TOC section when
creating a descriptor.
(xcoff_sweep): Don't mark toc_section unless it's needed.
(bfd_xcoff_size_dynamic_sections): Skip the toc_section
when marking every bfd.
(xcoff_link_input_bfd): Skip all TOC anchors.
(xcoff_toc_section_p, xcoff_find_tc0): New functions.
(_bfd_xcoff_bfd_final_link): Don't set the output bfd's TOC anchor
to -1; call xcoff_find_tc0 instead.
ld/testsuite/
* ld-powerpc/aix-toc-1.ex, ld-powerpc/aix-toc-1a.s,
ld-powerpc/aix-toc-1b.s, ld-powerpc/aix-toc-1-32.dd,
ld-powerpc/aix-toc-1-64.dd: New tests.
* ld-powerpc/aix52.exp: Run them.
* libcoff-in.h (xcoff_section_tdata): Update commentary.
* libcoff.h: Regenerate.
* xcofflink.c (xcoff_link_add_symbols): Set the csect of XTY_ER
symbols to bfd_und_section_ptr or bfd_abs_section_ptr, rather than
the previous symbol's csect. Treat last_symndx as an inclusive value
and simplify its handling.
(xcoff_mark): Treat last_symndx as an inclusive value. Only mark
symbols with the right csect. Don't mark rsec when processing
relocations against undefined or absolute sections.
(bfd_xcoff_size_dynamic_sections): Don't check the SEC_MARK flag
of bfd_und_section_ptr.
(xcoff_link_input_bfd): Likewise.
* xcoff.h (XCOFF_CALLED, XCOFF_IMPORT): Update comments.
(XCOFF_WAS_UNDEFINED): New flag.
(xcoff_link_hash_table): Add an "rtld" field.
bfd/
* coff-rs6000.c (xcoff_ppc_relocate_section): Report relocations
against undefined symbols if the symbol's XCOFF_WAS_UNDEFINED
flag is set. Assert that all undefined symbols are either
imported or defined by a dynamic object.
* coff64-rs6000.c (xcoff64_ppc_relocate_section): Likewise.
* xcofflink.c (xcoff_link_add_symbols): Extend function-symbol
handling to all relocations. Only set XCOFF_CALLED for function
symbols.
(xcoff_find_function): New function, split out from...
(bfd_xcoff_export_symbol) ...here.
(xcoff_set_import_path): New function, split out from...
(bfd_xcoff_import_symbol): ...here. Remove assertion for old
meaning of XCOFF_CALLED.
(xcoff_mark_symbol): If we mark an undefined and unimported
symbol, find some way of defining it. If the symbol is a function
descriptor, fill in its definition automatically. If the symbol
is a function, mark its descriptor and allocate room for global
linkage code. Otherwise mark the symbol as implicitly imported.
Move the code for creating function descriptors from...
(xcoff_build_ldsyms): ...here. Use XCOFF_WAS_UNDEFINED to
check for symbols that were implicitly defined.
(xcoff_mark): Don't count any dynamic relocations against
function symbols.
(bfd_xcoff_size_dynamic_sections): Save the rtld parameter
in the xcoff link info.
(xcoff_link_input_bfd): Remove handling of undefined and
unexported symbols.
ld/
* emultempl/aix.em (gld${EMULATION_NAME}_handle_option): Make
-berok and -bernotok control link_info.unresolved_syms_in_objects
and link_info.unresolved_syms_in_shared_libs instead of
force_make_executable.
ld/testsuite/
* ld-powerpc/aix-glink-1.ex, ld-powerpc/aix-glink-1.s,
ld-powerpc/aix-glink-1-32.dd, ld-powerpc/aix-glink-1-64.dd,
ld-powerpc/aix-glink-1-32.d, ld-powerpc/aix-glink-1-64.d: New tests.
* ld-powerpc/aix52.exp: Run them.
* xcofflink.c (xcoff_mark, xcoff_link_input_bfd): Don't copy
R_POS and R_NEG relocations against absolute symbols to the
.loader section.
ld/testsuite/
* ld-powerpc/aix-abs-reloc-1.ex, ld-powerpc/aix-abs-reloc-1.im,
ld-powerpc/aix-abs-reloc-1.od, ld-powerpc/aix-abs-reloc-1.s: New test.
* ld-powerpc/aix52.exp: Run it.
o bfd_read and bfd_write lose an unnecessary param and become
bfd_bread and bfd_bwrite.
o bfd_*alloc now all take a bfd_size_type arg, and will error if
size_t is too small. eg. 32 bit host, 64 bit bfd, verrry big files
or bugs in linker scripts etc.
o file_ptr becomes a bfd_signed_vma. Besides matching sizes with
various other types involved in handling sections, this should make
it easier for bfd to support a 64 bit off_t on 32 bit hosts that
provide it.
o I've made the H_GET_* and H_PUT_* macros (which invoke bfd_h_{get,put}_*)
generally available. They now cast their args to bfd_vma and
bfd_byte * as appropriate, which removes a swag of casts from the
source.
o Bug fixes to bfd_get8, aix386_core_vec, elf32_h8_relax_section, and
aout-encap.c.
o Zillions of formatting and -Wconversion fixes.
pseduo-section when determining where the TOC ends.
* coff-rs6000.c (_bfd_xcoff_swap_aux_out): Use bfd_h_put_16 to
output x_tvndx as it is only two bytes wide.
* coff-rs6000.c (xcoff_howto_table): A modifiable branch-absolute
reloc is 26 or 32 bits wide.
* coff-rs6000.c (_bfd_xcoff_rtype2howto): The bitsize is irrelevant
for relocs that don't change anything. Also look at the full
6 bits of bitsize.
to the list of NOPs we recognize after a branch-and-link.
Use the ori NOP when one is needed.
* coff-rs6000.c (_bfd_xcoff_slurp_armap): Finish implementation
for large archives.
bfd:
* Makefile.am (coff64-rs6000.lo): New rule.
* Makefile.in: Regenerate.
* coff-rs6000.c (xcoff_mkobject, xcoff_copy_private_bfd_data,
xcoff_is_local_label_name, xcoff_rtype2howto,
xcoff_reloc_type_lookup, xcoff_slurp_armap, xcoff_archive_p,
xcoff_read_ar_hdr, xcoff_openr_next_archived_file, xcoff_write_armap,
xcoff_write_archive_contents): No longer static, and prefix with _bfd_.
(NO_COFF_SYMBOLS): Define.
(xcoff64_swap_sym_in, xcoff64_swap_sym_out, xcoff64_swap_aux_in,
xcoff64_swap_aux_out): New functions; handle xcoff symbol tables
internally.
(MINUS_ONE): New macro.
(xcoff_howto_tabl, xcoff_reloc_type_lookup): Add 64 bit POS
relocation.
(coff_SWAP_sym_in, coff_SWAP_sym_out, coff_SWAP_aux_in,
coff_SWAP_aux_out): Map to the new functions.
* coff64-rs6000.c: New file.
* libcoff.h (bfd_coff_backend_data): Add new fields
_bfd_coff_force_symnames_in_strings and
_bfd_coff_debug_string_prefix_length.
(bfd_coff_force_symnames_in_strings,
bfd_coff_debug_string_prefix_length): New macros for above fields.
* coffcode.h (coff_set_arch_mach_hook): Handle XCOFF64 magic.
Set machine to 620 for XCOFF64. Use bfd_coff_swap_sym_in instead
of using coff_swap_sym_in directly.
(FORCE_SYMNAMES_IN_STRINGS): New macro, defined for XCOFF64.
(coff_set_flags) Set magic for XCOFF64.
(coff_compute_section_file_positions): Add symbol name length to
string section length if bfd_coff_debug_string_prefix_length is
true.
(coff_write_object_contents): Don't do reloc overflow for XCOFF64.
(coff_slurp_line_table): Use bfd_coff_swap_lineno_in instead of
using coff_swap_lineno_in directly.
(bfd_coff_backend_data): Add _bfd_coff_force_symnames_in_strings
and _bfd_coff_debug_string_prefix_length fields.
* coffgen.c (coff_fix_symbol_name, coff_write_symbols): Force
symbol names into strings table when
bfd_coff_force_symnames_in_strings is true.
* coffswap.h (MAX_SCNHDR_NRELOC, MAX_SCNHDR_NLNNO, GET_RELOC_VADDR,
SET_RELOC_VADDR): New macros.
(coff_swap_reloc_in, coff_swap_reloc_out): Use above macros.
(coff_swap_aux_in, coff_swap_aux_out): Remove RS6000COFF_C
code.
(coff_swap_aouthdr_in, coff_swap_aouthdr_out): Handle XCOFF64
changes within RS6000COFF_C specific code.
(coff_swap_scnhdr_out): Use PUT_SCNHDR_NLNNO, PUT_SCNHDR_NRELOC,
MAX_SCNHDR_NRELOC, and MAX_SCNHDR_NLNNO.
* reloc.c (bfd_perform_relocation, bfd_install_relocation):
Extend existing hack on target name.
* xcofflink.c (XCOFF_XVECP): Extend existing hack on
target name.
* coff-tic54x.c (ticof): Keep up to date with new fields
in bfd_coff_backend_data.
* config.bfd: Add bfd_powerpc_64_arch to targ_arch and define
targ_selvecs to include rs6000coff64_vec for rs6000.
* configure.in: Add rs6000coff64_vec case.
* cpu-powerpc.c: New bfd_arch_info_type.
gas:
* as.c (parse_args): Allow md_parse_option to override -a listing
option.
* config/obj-coff.c (add_lineno): Change type of offset parameter
from "int" to "bfd_vma."
* config/tc-ppc.c (md_pseudo_table): Add "llong" and "machine."
(ppc_mach, ppc_subseg_align, ppc_target_format): New.
(ppc_change_csect): Align correctly for XCOFF64.
(ppc_machine): New function, which discards "ppc_machine" line.
(ppc_tc): Cons for 8 when code is 64 bit.
(md_apply_fix3): Don't check operand->insert. Handle 64 bit
relocations.
(md_parse_option): Handle -a64 and -a32.
(ppc_xcoff64): New.
* config/tc-ppc.h (TARGET_MACH): Define.
(TARGET_FORMAT): Move to function.
(SUB_SEGMENT_ALIGN): Use ppc_subseg_align.
include:
* include/coff/rs6k64.h: New file.
opcodes:
* configure.in: Add bfd_powerpc_64_arch.
* disassemble.c (disassembler): Use print_insn_big_powerpc for
64 bit code.